drivers/net/ethernet/intel/Kconfig - kernel/msm-4.9 - Gitiles

 #
 # Intel network device configuration
 #

 config NET_VENDOR_INTEL
 	bool "Intel devices"
 	default y
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
 	  and read the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.

 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all
 	  the questions about Intel cards. If you say Y, you will be asked for
 	  your specific card in the following questions.

 if NET_VENDOR_INTEL

 config E100
 	tristate "Intel(R) PRO/100+ support"
 	depends on PCI
 	select NET_CORE
 	select MII
 	---help---
 	  This driver supports Intel(R) PRO/100 family of adapters.
 	  To verify that your adapter is supported, find the board ID number
 	  on the adapter. Look for a label that has a barcode and a number
 	  in the format 123456-001 (six digits hyphen three digits).

 	  Use the above information and the Adapter & Driver ID Guide at:

 	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>

 	  to identify the adapter.

 	  For the latest Intel PRO/100 network driver for Linux, see:

 	  <http://www.intel.com/p/en_US/support/highlights/network/pro100plus>

 	  More specific information on configuring the driver is in
 	  <file:Documentation/networking/e100.txt>.

 	  To compile this driver as a module, choose M here. The module
 	  will be called e100.

 config E1000
 	tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
 	depends on PCI
 	---help---
 	  This driver supports Intel(R) PRO/1000 gigabit ethernet family of
 	  adapters.  For more information on how to identify your adapter, go
 	  to the Adapter & Driver ID Guide at:

 	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>

 	  For general information and support, go to the Intel support
 	  website at:

 	  <http://support.intel.com>

 	  More specific information on configuring the driver is in
 	  <file:Documentation/networking/e1000.txt>.

 	  To compile this driver as a module, choose M here. The module
 	  will be called e1000.

 config E1000E
 	tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support"
 	depends on PCI && (!SPARC32 || BROKEN)
 	select CRC32
 	select PTP_1588_CLOCK
 	---help---
 	  This driver supports the PCI-Express Intel(R) PRO/1000 gigabit
 	  ethernet family of adapters. For PCI or PCI-X e1000 adapters,
 	  use the regular e1000 driver For more information on how to
 	  identify your adapter, go to the Adapter & Driver ID Guide at:

 	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>

 	  For general information and support, go to the Intel support
 	  website at:

 	  <http://support.intel.com>

 	  To compile this driver as a module, choose M here. The module
 	  will be called e1000e.

 config IGB
 	tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support"
 	depends on PCI
 	select PTP_1588_CLOCK
 	select I2C
 	select I2C_ALGOBIT
 	---help---
 	  This driver supports Intel(R) 82575/82576 gigabit ethernet family of
 	  adapters.  For more information on how to identify your adapter, go
 	  to the Adapter & Driver ID Guide at:

 	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>

 	  For general information and support, go to the Intel support
 	  website at:

 	  <http://support.intel.com>

 	  More specific information on configuring the driver is in
 	  <file:Documentation/networking/e1000.txt>.

 	  To compile this driver as a module, choose M here. The module
 	  will be called igb.

 config IGB_HWMON
 	bool "Intel(R) PCI-Express Gigabit adapters HWMON support"
 	default y
 	depends on IGB && HWMON && !(IGB=y && HWMON=m)
 	---help---
 	  Say Y if you want to expose thermal sensor data on Intel devices.

 	  Some of our devices contain thermal sensors, both external and internal.
 	  This data is available via the hwmon sysfs interface and exposes
 	  the onboard sensors.

 config IGB_DCA
 	bool "Direct Cache Access (DCA) Support"
 	default y
 	depends on IGB && DCA && !(IGB=y && DCA=m)
 	---help---
 	  Say Y here if you want to use Direct Cache Access (DCA) in the
 	  driver.  DCA is a method for warming the CPU cache before data
 	  is used, with the intent of lessening the impact of cache misses.

 config IGBVF
 	tristate "Intel(R) 82576 Virtual Function Ethernet support"
 	depends on PCI
 	---help---
 	  This driver supports Intel(R) 82576 virtual functions.  For more
 	  information on how to identify your adapter, go to the Adapter &
 	  Driver ID Guide at:

 	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>

 	  For general information and support, go to the Intel support
 	  website at:

 	  <http://support.intel.com>

 	  More specific information on configuring the driver is in
 	  <file:Documentation/networking/e1000.txt>.

 	  To compile this driver as a module, choose M here. The module
 	  will be called igbvf.

 config IXGB
 	tristate "Intel(R) PRO/10GbE support"
 	depends on PCI
 	---help---
 	  This driver supports Intel(R) PRO/10GbE family of adapters for
 	  PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver
 	  instead. For more information on how to identify your adapter, go
 	  to the Adapter & Driver ID Guide at:

 	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>

 	  For general information and support, go to the Intel support
 	  website at:

 	  <http://support.intel.com>

 	  More specific information on configuring the driver is in
 	  <file:Documentation/networking/ixgb.txt>.

 	  To compile this driver as a module, choose M here. The module
 	  will be called ixgb.

 config IXGBE
 	tristate "Intel(R) 10GbE PCI Express adapters support"
 	depends on PCI
 	select MDIO
 	select PTP_1588_CLOCK
 	---help---
 	  This driver supports Intel(R) 10GbE PCI Express family of
 	  adapters.  For more information on how to identify your adapter, go
 	  to the Adapter & Driver ID Guide at:

 	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>

 	  For general information and support, go to the Intel support
 	  website at:

 	  <http://support.intel.com>

 	  To compile this driver as a module, choose M here. The module
 	  will be called ixgbe.

 config IXGBE_HWMON
 	bool "Intel(R) 10GbE PCI Express adapters HWMON support"
 	default y
 	depends on IXGBE && HWMON && !(IXGBE=y && HWMON=m)
 	---help---
 	  Say Y if you want to expose the thermal sensor data on some of
 	  our cards, via a hwmon sysfs interface.

 config IXGBE_DCA
 	bool "Direct Cache Access (DCA) Support"
 	default y
 	depends on IXGBE && DCA && !(IXGBE=y && DCA=m)
 	---help---
 	  Say Y here if you want to use Direct Cache Access (DCA) in the
 	  driver.  DCA is a method for warming the CPU cache before data
 	  is used, with the intent of lessening the impact of cache misses.

 config IXGBE_DCB
 	bool "Data Center Bridging (DCB) Support"
 	default n
 	depends on IXGBE && DCB
 	---help---
 	  Say Y here if you want to use Data Center Bridging (DCB) in the
 	  driver.

 	  If unsure, say N.

 config IXGBEVF
 	tristate "Intel(R) 82599 Virtual Function Ethernet support"
 	depends on PCI_MSI
 	---help---
 	  This driver supports Intel(R) 82599 virtual functions.  For more
 	  information on how to identify your adapter, go to the Adapter &
 	  Driver ID Guide at:

 	  <http://support.intel.com/support/network/sb/CS-008441.htm>

 	  For general information and support, go to the Intel support
 	  website at:

 	  <http://support.intel.com>

 	  More specific information on configuring the driver is in
 	  <file:Documentation/networking/ixgbevf.txt>.

 	  To compile this driver as a module, choose M here. The module
 	  will be called ixgbevf.  MSI-X interrupt support is required
 	  for this driver to work correctly.

 endif # NET_VENDOR_INTEL
	#
	# Intel network device configuration
	#

	config NET_VENDOR_INTEL
	bool "Intel devices"
	default y
	---help---
	If you have a network (Ethernet) card belonging to this class, say Y
	and read the Ethernet-HOWTO, available from
	<http://www.tldp.org/docs.html#howto>.

	Note that the answer to this question doesn't directly affect the
	kernel: saying N will just cause the configurator to skip all
	the questions about Intel cards. If you say Y, you will be asked for
	your specific card in the following questions.

	if NET_VENDOR_INTEL

	config E100
	tristate "Intel(R) PRO/100+ support"
	depends on PCI
	select NET_CORE
	select MII
	---help---
	This driver supports Intel(R) PRO/100 family of adapters.
	To verify that your adapter is supported, find the board ID number
	on the adapter. Look for a label that has a barcode and a number
	in the format 123456-001 (six digits hyphen three digits).

	Use the above information and the Adapter & Driver ID Guide at:

	<http://support.intel.com/support/network/adapter/pro100/21397.htm>

	to identify the adapter.

	For the latest Intel PRO/100 network driver for Linux, see:

	<http://www.intel.com/p/en_US/support/highlights/network/pro100plus>

	More specific information on configuring the driver is in
	<file:Documentation/networking/e100.txt>.

	To compile this driver as a module, choose M here. The module
	will be called e100.

	config E1000
	tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
	depends on PCI
	---help---
	This driver supports Intel(R) PRO/1000 gigabit ethernet family of
	adapters. For more information on how to identify your adapter, go
	to the Adapter & Driver ID Guide at:

	<http://support.intel.com/support/network/adapter/pro100/21397.htm>

	For general information and support, go to the Intel support
	website at:

	<http://support.intel.com>

	More specific information on configuring the driver is in
	<file:Documentation/networking/e1000.txt>.

	To compile this driver as a module, choose M here. The module
	will be called e1000.

	config E1000E
	tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support"
	depends on PCI && (!SPARC32 \|\| BROKEN)
	select CRC32
	select PTP_1588_CLOCK
	---help---
	This driver supports the PCI-Express Intel(R) PRO/1000 gigabit
	ethernet family of adapters. For PCI or PCI-X e1000 adapters,
	use the regular e1000 driver For more information on how to
	identify your adapter, go to the Adapter & Driver ID Guide at:

	<http://support.intel.com/support/network/adapter/pro100/21397.htm>

	For general information and support, go to the Intel support
	website at:

	<http://support.intel.com>

	To compile this driver as a module, choose M here. The module
	will be called e1000e.

	config IGB
	tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support"
	depends on PCI
	select PTP_1588_CLOCK
	select I2C
	select I2C_ALGOBIT
	---help---
	This driver supports Intel(R) 82575/82576 gigabit ethernet family of
	adapters. For more information on how to identify your adapter, go
	to the Adapter & Driver ID Guide at:

	<http://support.intel.com/support/network/adapter/pro100/21397.htm>

	For general information and support, go to the Intel support
	website at:

	<http://support.intel.com>

	More specific information on configuring the driver is in
	<file:Documentation/networking/e1000.txt>.

	To compile this driver as a module, choose M here. The module
	will be called igb.

	config IGB_HWMON
	bool "Intel(R) PCI-Express Gigabit adapters HWMON support"
	default y
	depends on IGB && HWMON && !(IGB=y && HWMON=m)
	---help---
	Say Y if you want to expose thermal sensor data on Intel devices.

	Some of our devices contain thermal sensors, both external and internal.
	This data is available via the hwmon sysfs interface and exposes
	the onboard sensors.

	config IGB_DCA
	bool "Direct Cache Access (DCA) Support"
	default y
	depends on IGB && DCA && !(IGB=y && DCA=m)
	---help---
	Say Y here if you want to use Direct Cache Access (DCA) in the
	driver. DCA is a method for warming the CPU cache before data
	is used, with the intent of lessening the impact of cache misses.

	config IGBVF
	tristate "Intel(R) 82576 Virtual Function Ethernet support"
	depends on PCI
	---help---
	This driver supports Intel(R) 82576 virtual functions. For more
	information on how to identify your adapter, go to the Adapter &
	Driver ID Guide at:

	<http://support.intel.com/support/network/adapter/pro100/21397.htm>

	For general information and support, go to the Intel support
	website at:

	<http://support.intel.com>

	More specific information on configuring the driver is in
	<file:Documentation/networking/e1000.txt>.

	To compile this driver as a module, choose M here. The module
	will be called igbvf.

	config IXGB
	tristate "Intel(R) PRO/10GbE support"
	depends on PCI
	---help---
	This driver supports Intel(R) PRO/10GbE family of adapters for
	PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver
	instead. For more information on how to identify your adapter, go
	to the Adapter & Driver ID Guide at:

	<http://support.intel.com/support/network/adapter/pro100/21397.htm>

	For general information and support, go to the Intel support
	website at:

	<http://support.intel.com>

	More specific information on configuring the driver is in
	<file:Documentation/networking/ixgb.txt>.

	To compile this driver as a module, choose M here. The module
	will be called ixgb.

	config IXGBE
	tristate "Intel(R) 10GbE PCI Express adapters support"
	depends on PCI
	select MDIO
	select PTP_1588_CLOCK
	---help---
	This driver supports Intel(R) 10GbE PCI Express family of
	adapters. For more information on how to identify your adapter, go
	to the Adapter & Driver ID Guide at:

	<http://support.intel.com/support/network/adapter/pro100/21397.htm>

	For general information and support, go to the Intel support
	website at:

	<http://support.intel.com>

	To compile this driver as a module, choose M here. The module
	will be called ixgbe.

	config IXGBE_HWMON
	bool "Intel(R) 10GbE PCI Express adapters HWMON support"
	default y
	depends on IXGBE && HWMON && !(IXGBE=y && HWMON=m)
	---help---
	Say Y if you want to expose the thermal sensor data on some of
	our cards, via a hwmon sysfs interface.

	config IXGBE_DCA
	bool "Direct Cache Access (DCA) Support"
	default y
	depends on IXGBE && DCA && !(IXGBE=y && DCA=m)
	---help---
	Say Y here if you want to use Direct Cache Access (DCA) in the
	driver. DCA is a method for warming the CPU cache before data
	is used, with the intent of lessening the impact of cache misses.

	config IXGBE_DCB
	bool "Data Center Bridging (DCB) Support"
	default n
	depends on IXGBE && DCB
	---help---
	Say Y here if you want to use Data Center Bridging (DCB) in the
	driver.

	If unsure, say N.

	config IXGBEVF
	tristate "Intel(R) 82599 Virtual Function Ethernet support"
	depends on PCI_MSI
	---help---
	This driver supports Intel(R) 82599 virtual functions. For more
	information on how to identify your adapter, go to the Adapter &
	Driver ID Guide at:

	<http://support.intel.com/support/network/sb/CS-008441.htm>

	For general information and support, go to the Intel support
	website at:

	<http://support.intel.com>

	More specific information on configuring the driver is in
	<file:Documentation/networking/ixgbevf.txt>.

	To compile this driver as a module, choose M here. The module
	will be called ixgbevf. MSI-X interrupt support is required
	for this driver to work correctly.

	endif # NET_VENDOR_INTEL