[media] adv7175: Make use of media bus pixel codes
The ADV7175A/ADV7176A can operate in either 8-bit or 16-bit YCrCb mode.
* 8-Bit YCrCb Mode
This default mode accepts multiplexed YCrCb inputs through
the P7-P0 pixel inputs. The inputs follow the sequence Cb0, Y0
Cr0, Y1 Cb1, Y2, etc. The Y, Cb and Cr data are input on a
rising clock edge.
* 16-Bit YCrCb Mode
This mode accepts Y inputs through the P7–P0 pixel inputs and
multiplexed CrCb inputs through the P15–P8 pixel inputs. The
data is loaded on every second rising edge of CLOCK. The inputs
follow the sequence Cb0, Y0 Cr0, Y1 Cb1, Y2, etc.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/video/adv7175.c b/drivers/media/video/adv7175.c
index d2327db..206078e 100644
--- a/drivers/media/video/adv7175.c
+++ b/drivers/media/video/adv7175.c
@@ -61,6 +61,11 @@
static char *inputs[] = { "pass_through", "play_back", "color_bar" };
+static enum v4l2_mbus_pixelcode adv7175_codes[] = {
+ V4L2_MBUS_FMT_UYVY8_2X8,
+ V4L2_MBUS_FMT_UYVY8_1X16,
+};
+
/* ----------------------------------------------------------------------- */
static inline int adv7175_write(struct v4l2_subdev *sd, u8 reg, u8 value)
@@ -296,6 +301,60 @@
return 0;
}
+static int adv7175_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
+ enum v4l2_mbus_pixelcode *code)
+{
+ if (index >= ARRAY_SIZE(adv7175_codes))
+ return -EINVAL;
+
+ *code = adv7175_codes[index];
+ return 0;
+}
+
+static int adv7175_g_fmt(struct v4l2_subdev *sd,
+ struct v4l2_mbus_framefmt *mf)
+{
+ u8 val = adv7175_read(sd, 0x7);
+
+ if ((val & 0x40) == (1 << 6))
+ mf->code = V4L2_MBUS_FMT_UYVY8_1X16;
+ else
+ mf->code = V4L2_MBUS_FMT_UYVY8_2X8;
+
+ mf->colorspace = V4L2_COLORSPACE_SMPTE170M;
+ mf->width = 0;
+ mf->height = 0;
+ mf->field = V4L2_FIELD_ANY;
+
+ return 0;
+}
+
+static int adv7175_s_fmt(struct v4l2_subdev *sd,
+ struct v4l2_mbus_framefmt *mf)
+{
+ u8 val = adv7175_read(sd, 0x7);
+ int ret;
+
+ switch (mf->code) {
+ case V4L2_MBUS_FMT_UYVY8_2X8:
+ val &= ~0x40;
+ break;
+
+ case V4L2_MBUS_FMT_UYVY8_1X16:
+ val |= 0x40;
+ break;
+
+ default:
+ v4l2_dbg(1, debug, sd,
+ "illegal v4l2_mbus_framefmt code: %d\n", mf->code);
+ return -EINVAL;
+ }
+
+ ret = adv7175_write(sd, 0x7, val);
+
+ return ret;
+}
+
static int adv7175_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
@@ -324,6 +383,9 @@
static const struct v4l2_subdev_video_ops adv7175_video_ops = {
.s_std_output = adv7175_s_std_output,
.s_routing = adv7175_s_routing,
+ .s_mbus_fmt = adv7175_s_fmt,
+ .g_mbus_fmt = adv7175_g_fmt,
+ .enum_mbus_fmt = adv7175_enum_fmt,
};
static const struct v4l2_subdev_ops adv7175_ops = {