ahci: Convert driver to use modern PM hooks
In order to add support for runtime PM to the ahci driver we first need to
convert the driver to use modern non-legacy system suspend hooks. There
should be no functional changes.
tj: Updated .driver.pm init for older compilers as suggested by Andy
and Chrsitoph.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 546a369..4ac1bb3 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -93,9 +93,9 @@
static bool is_mcp89_apple(struct pci_dev *pdev);
static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline);
-#ifdef CONFIG_PM
-static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
-static int ahci_pci_device_resume(struct pci_dev *pdev);
+#ifdef CONFIG_PM_SLEEP
+static int ahci_pci_device_suspend(struct device *dev);
+static int ahci_pci_device_resume(struct device *dev);
#endif
static struct scsi_host_template ahci_sht = {
@@ -557,16 +557,18 @@
{ } /* terminate list */
};
+static const struct dev_pm_ops ahci_pci_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(ahci_pci_device_suspend, ahci_pci_device_resume)
+};
static struct pci_driver ahci_pci_driver = {
.name = DRV_NAME,
.id_table = ahci_pci_tbl,
.probe = ahci_init_one,
.remove = ata_pci_remove_one,
-#ifdef CONFIG_PM
- .suspend = ahci_pci_device_suspend,
- .resume = ahci_pci_device_resume,
-#endif
+ .driver = {
+ .pm = &ahci_pci_pm_ops,
+ },
};
#if defined(CONFIG_PATA_MARVELL) || defined(CONFIG_PATA_MARVELL_MODULE)
@@ -794,44 +796,39 @@
}
-#ifdef CONFIG_PM
-static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
+#ifdef CONFIG_PM_SLEEP
+static int ahci_pci_device_suspend(struct device *dev)
{
+ struct pci_dev *pdev = to_pci_dev(dev);
struct ata_host *host = pci_get_drvdata(pdev);
struct ahci_host_priv *hpriv = host->private_data;
void __iomem *mmio = hpriv->mmio;
u32 ctl;
- if (mesg.event & PM_EVENT_SUSPEND &&
- hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
+ if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
dev_err(&pdev->dev,
"BIOS update required for suspend/resume\n");
return -EIO;
}
- if (mesg.event & PM_EVENT_SLEEP) {
- /* AHCI spec rev1.1 section 8.3.3:
- * Software must disable interrupts prior to requesting a
- * transition of the HBA to D3 state.
- */
- ctl = readl(mmio + HOST_CTL);
- ctl &= ~HOST_IRQ_EN;
- writel(ctl, mmio + HOST_CTL);
- readl(mmio + HOST_CTL); /* flush */
- }
+ /* AHCI spec rev1.1 section 8.3.3:
+ * Software must disable interrupts prior to requesting a
+ * transition of the HBA to D3 state.
+ */
+ ctl = readl(mmio + HOST_CTL);
+ ctl &= ~HOST_IRQ_EN;
+ writel(ctl, mmio + HOST_CTL);
+ readl(mmio + HOST_CTL); /* flush */
- return ata_pci_device_suspend(pdev, mesg);
+ return ata_host_suspend(host, PMSG_SUSPEND);
}
-static int ahci_pci_device_resume(struct pci_dev *pdev)
+static int ahci_pci_device_resume(struct device *dev)
{
+ struct pci_dev *pdev = to_pci_dev(dev);
struct ata_host *host = pci_get_drvdata(pdev);
int rc;
- rc = ata_pci_device_do_resume(pdev);
- if (rc)
- return rc;
-
/* Apple BIOS helpfully mangles the registers on resume */
if (is_mcp89_apple(pdev))
ahci_mcp89_apple_enable(pdev);