efikamx: read board id
read board id value from the GPIO3_16/17/11
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c
index 1b1d4f1..057f9f4 100644
--- a/arch/arm/mach-mx5/board-mx51_efikamx.c
+++ b/arch/arm/mach-mx5/board-mx51_efikamx.c
@@ -39,12 +39,25 @@
#define MX51_USB_PLL_DIV_24_MHZ 0x01
+#define EFIKAMX_PCBID0 (2*32 + 16)
+#define EFIKAMX_PCBID1 (2*32 + 17)
+#define EFIKAMX_PCBID2 (2*32 + 11)
+
+/* the pci ids pin have pull up. they're driven low according to board id */
+#define MX51_PAD_PCBID0 IOMUX_PAD(0x518, 0x130, 3, 0x0, 0, PAD_CTL_PUS_100K_UP)
+#define MX51_PAD_PCBID1 IOMUX_PAD(0x51C, 0x134, 3, 0x0, 0, PAD_CTL_PUS_100K_UP)
+#define MX51_PAD_PCBID2 IOMUX_PAD(0x504, 0x128, 3, 0x0, 0, PAD_CTL_PUS_100K_UP)
+
static iomux_v3_cfg_t mx51efikamx_pads[] = {
/* UART1 */
MX51_PAD_UART1_RXD__UART1_RXD,
MX51_PAD_UART1_TXD__UART1_TXD,
MX51_PAD_UART1_RTS__UART1_RTS,
MX51_PAD_UART1_CTS__UART1_CTS,
+ /* board id */
+ MX51_PAD_PCBID0,
+ MX51_PAD_PCBID1,
+ MX51_PAD_PCBID2,
};
/* Serial ports */
@@ -92,10 +105,62 @@
.flags = MXC_EHCI_INTERNAL_PHY,
};
+/* PCBID2 PCBID1 PCBID0 STATE
+ 1 1 1 ER1:rev1.1
+ 1 1 0 ER2:rev1.2
+ 1 0 1 ER3:rev1.3
+ 1 0 0 ER4:rev1.4
+*/
+static void __init mx51_efikamx_board_id(void)
+{
+ int id;
+
+ /* things are taking time to settle */
+ msleep(150);
+
+ gpio_request(EFIKAMX_PCBID0, "pcbid0");
+ gpio_direction_input(EFIKAMX_PCBID0);
+ gpio_request(EFIKAMX_PCBID1, "pcbid1");
+ gpio_direction_input(EFIKAMX_PCBID1);
+ gpio_request(EFIKAMX_PCBID2, "pcbid2");
+ gpio_direction_input(EFIKAMX_PCBID2);
+
+ id = gpio_get_value(EFIKAMX_PCBID0);
+ id |= gpio_get_value(EFIKAMX_PCBID1) << 1;
+ id |= gpio_get_value(EFIKAMX_PCBID2) << 2;
+
+ switch (id) {
+ case 7:
+ system_rev = 0x11;
+ break;
+ case 6:
+ system_rev = 0x12;
+ break;
+ case 5:
+ system_rev = 0x13;
+ break;
+ case 4:
+ system_rev = 0x14;
+ break;
+ default:
+ system_rev = 0x10;
+ break;
+ }
+
+ if ((system_rev == 0x10)
+ || (system_rev == 0x12)
+ || (system_rev == 0x14)) {
+ printk(KERN_WARNING
+ "EfikaMX: Unsupported board revision 1.%u!\n",
+ system_rev & 0xf);
+ }
+}
+
static void __init mxc_board_init(void)
{
mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads,
ARRAY_SIZE(mx51efikamx_pads));
+ mx51_efikamx_board_id();
mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
mxc_init_imx_uart();
}