ARM: S5P64X0: Move DMA support for S5P64X0
This patch moves DMA support files in the mach-s5p64x0
for S5P6440 and S5P6450 SoCs.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Cc: Jassi Brar <jassi.brar@samsung.com>
diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c
new file mode 100644
index 0000000..29a8c24
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/dma.c
@@ -0,0 +1,149 @@
+/* linux/arch/arm/mach-s5p64x0/dma.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ * Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <mach/map.h>
+#include <mach/irqs.h>
+#include <mach/regs-clock.h>
+
+#include <plat/devs.h>
+#include <plat/s3c-pl330-pdata.h>
+
+static u64 dma_dmamask = DMA_BIT_MASK(32);
+
+static struct resource s5p64x0_pdma_resource[] = {
+ [0] = {
+ .start = S5P64X0_PA_PDMA,
+ .end = S5P64X0_PA_PDMA + SZ_4K,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_DMA0,
+ .end = IRQ_DMA0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct s3c_pl330_platdata s5p6440_pdma_pdata = {
+ .peri = {
+ [0] = DMACH_UART0_RX,
+ [1] = DMACH_UART0_TX,
+ [2] = DMACH_UART1_RX,
+ [3] = DMACH_UART1_TX,
+ [4] = DMACH_UART2_RX,
+ [5] = DMACH_UART2_TX,
+ [6] = DMACH_UART3_RX,
+ [7] = DMACH_UART3_TX,
+ [8] = DMACH_MAX,
+ [9] = DMACH_MAX,
+ [10] = DMACH_PCM0_TX,
+ [11] = DMACH_PCM0_RX,
+ [12] = DMACH_I2S0_TX,
+ [13] = DMACH_I2S0_RX,
+ [14] = DMACH_SPI0_TX,
+ [15] = DMACH_SPI0_RX,
+ [16] = DMACH_MAX,
+ [17] = DMACH_MAX,
+ [18] = DMACH_MAX,
+ [19] = DMACH_MAX,
+ [20] = DMACH_SPI1_TX,
+ [21] = DMACH_SPI1_RX,
+ [22] = DMACH_MAX,
+ [23] = DMACH_MAX,
+ [24] = DMACH_MAX,
+ [25] = DMACH_MAX,
+ [26] = DMACH_MAX,
+ [27] = DMACH_MAX,
+ [28] = DMACH_MAX,
+ [29] = DMACH_PWM,
+ [30] = DMACH_MAX,
+ [31] = DMACH_MAX,
+ },
+};
+
+static struct s3c_pl330_platdata s5p6450_pdma_pdata = {
+ .peri = {
+ [0] = DMACH_UART0_RX,
+ [1] = DMACH_UART0_TX,
+ [2] = DMACH_UART1_RX,
+ [3] = DMACH_UART1_TX,
+ [4] = DMACH_UART2_RX,
+ [5] = DMACH_UART2_TX,
+ [6] = DMACH_UART3_RX,
+ [7] = DMACH_UART3_TX,
+ [8] = DMACH_UART4_RX,
+ [9] = DMACH_UART4_TX,
+ [10] = DMACH_PCM0_TX,
+ [11] = DMACH_PCM0_RX,
+ [12] = DMACH_I2S0_TX,
+ [13] = DMACH_I2S0_RX,
+ [14] = DMACH_SPI0_TX,
+ [15] = DMACH_SPI0_RX,
+ [16] = DMACH_PCM1_TX,
+ [17] = DMACH_PCM1_RX,
+ [18] = DMACH_PCM2_TX,
+ [19] = DMACH_PCM2_RX,
+ [20] = DMACH_SPI1_TX,
+ [21] = DMACH_SPI1_RX,
+ [22] = DMACH_USI_TX,
+ [23] = DMACH_USI_RX,
+ [24] = DMACH_MAX,
+ [25] = DMACH_I2S1_TX,
+ [26] = DMACH_I2S1_RX,
+ [27] = DMACH_I2S2_TX,
+ [28] = DMACH_I2S2_RX,
+ [29] = DMACH_PWM,
+ [30] = DMACH_UART5_RX,
+ [31] = DMACH_UART5_TX,
+ },
+};
+
+static struct platform_device s5p64x0_device_pdma = {
+ .name = "s3c-pl330",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s5p64x0_pdma_resource),
+ .resource = s5p64x0_pdma_resource,
+ .dev = {
+ .dma_mask = &dma_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+static int __init s5p64x0_dma_init(void)
+{
+ unsigned int id;
+
+ id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000;
+
+ if (id == 0x50000)
+ s5p64x0_device_pdma.dev.platform_data = &s5p6450_pdma_pdata;
+ else
+ s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata;
+
+ platform_device_register(&s5p64x0_device_pdma);
+
+ return 0;
+}
+arch_initcall(s5p64x0_dma_init);