w1: ds2490 reduce magic numbers
Use a #define for the usb vendor request type, clear the status
byte and use that instead of a magic offset in checking if idle.
Signed-off-by: David Fries <David@Fries.net>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/w1/masters/ds2490.c b/drivers/w1/masters/ds2490.c
index 4f7e1d7..6a3d0a1 100644
--- a/drivers/w1/masters/ds2490.c
+++ b/drivers/w1/masters/ds2490.c
@@ -1,5 +1,5 @@
/*
- * dscore.c
+ * ds2490.c USB to one wire bridge
*
* Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
*
@@ -28,6 +28,10 @@
#include "../w1_int.h"
#include "../w1.h"
+/* USB Standard */
+/* USB Control request vendor type */
+#define VENDOR 0x40
+
/* COMMAND TYPE CODES */
#define CONTROL_CMD 0x00
#define COMM_CMD 0x01
@@ -107,6 +111,8 @@
#define ST_HALT 0x10 /* DS2490 is currently halted */
#define ST_IDLE 0x20 /* DS2490 is currently idle */
#define ST_EPOF 0x80
+/* Status transfer size, 16 bytes status, 16 byte result flags */
+#define ST_SIZE 0x20
/* Result Register flags */
#define RR_DETECT 0xA5 /* New device detected */
@@ -198,7 +204,7 @@
int err;
err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, dev->ep[EP_CONTROL]),
- CONTROL_CMD, 0x40, value, index, NULL, 0, 1000);
+ CONTROL_CMD, VENDOR, value, index, NULL, 0, 1000);
if (err < 0) {
printk(KERN_ERR "Failed to send command control message %x.%x: err=%d.\n",
value, index, err);
@@ -213,7 +219,7 @@
int err;
err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, dev->ep[EP_CONTROL]),
- MODE_CMD, 0x40, value, index, NULL, 0, 1000);
+ MODE_CMD, VENDOR, value, index, NULL, 0, 1000);
if (err < 0) {
printk(KERN_ERR "Failed to send mode control message %x.%x: err=%d.\n",
value, index, err);
@@ -228,7 +234,7 @@
int err;
err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, dev->ep[EP_CONTROL]),
- COMM_CMD, 0x40, value, index, NULL, 0, 1000);
+ COMM_CMD, VENDOR, value, index, NULL, 0, 1000);
if (err < 0) {
printk(KERN_ERR "Failed to send control message %x.%x: err=%d.\n",
value, index, err);
@@ -353,7 +359,7 @@
err = usb_bulk_msg(dev->udev, usb_rcvbulkpipe(dev->udev, dev->ep[EP_DATA_IN]),
buf, size, &count, 1000);
if (err < 0) {
- u8 buf[0x20];
+ u8 buf[ST_SIZE];
int count;
printk(KERN_INFO "Clearing ep0x%x.\n", dev->ep[EP_DATA_IN]);
@@ -398,7 +404,7 @@
{
struct ds_status st;
int count = 0, err = 0;
- u8 buf[0x20];
+ u8 buf[ST_SIZE];
do {
err = ds_send_control(dev, CTL_HALT_EXE_IDLE, 0);
@@ -450,10 +456,11 @@
static int ds_wait_status(struct ds_device *dev, struct ds_status *st)
{
- u8 buf[0x20];
+ u8 buf[ST_SIZE];
int err, count = 0;
do {
+ st->status = 0;
err = ds_recv_status_nodump(dev, st, buf, sizeof(buf));
#if 0
if (err >= 0) {
@@ -464,7 +471,7 @@
printk("\n");
}
#endif
- } while (!(buf[0x08] & ST_IDLE) && !(err < 0) && ++count < 100);
+ } while (!(st->status & ST_IDLE) && !(err < 0) && ++count < 100);
if (err >= 16 && st->status & ST_EPOF) {
printk(KERN_INFO "Resetting device after ST_EPOF.\n");