#ifndef _ASM_X86_SEGMENT_H_
#define _ASM_X86_SEGMENT_H_

#ifdef CONFIG_X86_32
/*
 * The layout of the per-CPU GDT under Linux:
 *
 *   0 - null
 *   1 - reserved
 *   2 - reserved
 *   3 - reserved
 *
 *   4 - unused			<==== new cacheline
 *   5 - unused
 *
 *  ------- start of TLS (Thread-Local Storage) segments:
 *
 *   6 - TLS segment #1			[ glibc's TLS segment ]
 *   7 - TLS segment #2			[ Wine's %fs Win32 segment ]
 *   8 - TLS segment #3
 *   9 - reserved
 *  10 - reserved
 *  11 - reserved
 *
 *  ------- start of kernel segments:
 *
 *  12 - kernel code segment		<==== new cacheline
 *  13 - kernel data segment
 *  14 - default user CS
 *  15 - default user DS
 *  16 - TSS
 *  17 - LDT
 *  18 - PNPBIOS support (16->32 gate)
 *  19 - PNPBIOS support
 *  20 - PNPBIOS support
 *  21 - PNPBIOS support
 *  22 - PNPBIOS support
 *  23 - APM BIOS support
 *  24 - APM BIOS support
 *  25 - APM BIOS support
 *
 *  26 - ESPFIX small SS
 *  27 - per-cpu			[ offset to per-cpu data area ]
 *  28 - unused
 *  29 - unused
 *  30 - unused
 *  31 - TSS for double fault handler
 */
#define GDT_ENTRY_TLS_MIN	6
#define GDT_ENTRY_TLS_MAX 	(GDT_ENTRY_TLS_MIN + GDT_ENTRY_TLS_ENTRIES - 1)

#define GDT_ENTRY_DEFAULT_USER_CS	14
#define __USER_CS (GDT_ENTRY_DEFAULT_USER_CS * 8 + 3)

#define GDT_ENTRY_DEFAULT_USER_DS	15
#define __USER_DS (GDT_ENTRY_DEFAULT_USER_DS * 8 + 3)

#define GDT_ENTRY_KERNEL_BASE	12

#define GDT_ENTRY_KERNEL_CS		(GDT_ENTRY_KERNEL_BASE + 0)
#define __KERNEL_CS (GDT_ENTRY_KERNEL_CS * 8)

#define GDT_ENTRY_KERNEL_DS		(GDT_ENTRY_KERNEL_BASE + 1)
#define __KERNEL_DS (GDT_ENTRY_KERNEL_DS * 8)

#define GDT_ENTRY_TSS			(GDT_ENTRY_KERNEL_BASE + 4)
#define GDT_ENTRY_LDT			(GDT_ENTRY_KERNEL_BASE + 5)

#define GDT_ENTRY_PNPBIOS_BASE		(GDT_ENTRY_KERNEL_BASE + 6)
#define GDT_ENTRY_APMBIOS_BASE		(GDT_ENTRY_KERNEL_BASE + 11)

#define GDT_ENTRY_ESPFIX_SS		(GDT_ENTRY_KERNEL_BASE + 14)
#define __ESPFIX_SS (GDT_ENTRY_ESPFIX_SS * 8)

#define GDT_ENTRY_PERCPU			(GDT_ENTRY_KERNEL_BASE + 15)
#ifdef CONFIG_SMP
#define __KERNEL_PERCPU (GDT_ENTRY_PERCPU * 8)
#else
#define __KERNEL_PERCPU 0
#endif

#define GDT_ENTRY_DOUBLEFAULT_TSS	31

/*
 * The GDT has 32 entries
 */
#define GDT_ENTRIES 32

/* Simple and small GDT entries for booting only */

#define GDT_ENTRY_BOOT_CS		2
#define __BOOT_CS	(GDT_ENTRY_BOOT_CS * 8)

#define GDT_ENTRY_BOOT_DS		(GDT_ENTRY_BOOT_CS + 1)
#define __BOOT_DS	(GDT_ENTRY_BOOT_DS * 8)

/* The PnP BIOS entries in the GDT */
#define GDT_ENTRY_PNPBIOS_CS32		(GDT_ENTRY_PNPBIOS_BASE + 0)
#define GDT_ENTRY_PNPBIOS_CS16		(GDT_ENTRY_PNPBIOS_BASE + 1)
#define GDT_ENTRY_PNPBIOS_DS		(GDT_ENTRY_PNPBIOS_BASE + 2)
#define GDT_ENTRY_PNPBIOS_TS1		(GDT_ENTRY_PNPBIOS_BASE + 3)
#define GDT_ENTRY_PNPBIOS_TS2		(GDT_ENTRY_PNPBIOS_BASE + 4)

/* The PnP BIOS selectors */
#define PNP_CS32   (GDT_ENTRY_PNPBIOS_CS32 * 8)	/* segment for calling fn */
#define PNP_CS16   (GDT_ENTRY_PNPBIOS_CS16 * 8)	/* code segment for BIOS */
#define PNP_DS     (GDT_ENTRY_PNPBIOS_DS * 8)	/* data segment for BIOS */
#define PNP_TS1    (GDT_ENTRY_PNPBIOS_TS1 * 8)	/* transfer data segment */
#define PNP_TS2    (GDT_ENTRY_PNPBIOS_TS2 * 8)	/* another data segment */

/* Bottom two bits of selector give the ring privilege level */
#define SEGMENT_RPL_MASK	0x3
/* Bit 2 is table indicator (LDT/GDT) */
#define SEGMENT_TI_MASK		0x4

/* User mode is privilege level 3 */
#define USER_RPL		0x3
/* LDT segment has TI set, GDT has it cleared */
#define SEGMENT_LDT		0x4
#define SEGMENT_GDT		0x0

/*
 * Matching rules for certain types of segments.
 */

/* Matches only __KERNEL_CS, ignoring PnP / USER / APM segments */
#define SEGMENT_IS_KERNEL_CODE(x) (((x) & 0xfc) == GDT_ENTRY_KERNEL_CS * 8)

/* Matches __KERNEL_CS and __USER_CS (they must be 2 entries apart) */
#define SEGMENT_IS_FLAT_CODE(x)  (((x) & 0xec) == GDT_ENTRY_KERNEL_CS * 8)

/* Matches PNP_CS32 and PNP_CS16 (they must be consecutive) */
#define SEGMENT_IS_PNP_CODE(x)   (((x) & 0xf4) == GDT_ENTRY_PNPBIOS_BASE * 8)


#else
#include <asm/cache.h>

/* Simple and small GDT entries for booting only */

#define GDT_ENTRY_BOOT_CS		2
#define __BOOT_CS	(GDT_ENTRY_BOOT_CS * 8)

#define GDT_ENTRY_BOOT_DS		(GDT_ENTRY_BOOT_CS + 1)
#define __BOOT_DS	(GDT_ENTRY_BOOT_DS * 8)

#define __KERNEL_CS	0x10
#define __KERNEL_DS	0x18

#define __KERNEL32_CS   0x08

/*
 * we cannot use the same code segment descriptor for user and kernel
 * -- not even in the long flat mode, because of different DPL /kkeil
 * The segment offset needs to contain a RPL. Grr. -AK
 * GDT layout to get 64bit syscall right (sysret hardcodes gdt offsets)
 */

#define __USER32_CS   0x23   /* 4*8+3 */
#define __USER_DS     0x2b   /* 5*8+3 */
#define __USER_CS     0x33   /* 6*8+3 */
#define __USER32_DS	__USER_DS

#define GDT_ENTRY_TSS 8	/* needs two entries */
#define GDT_ENTRY_LDT 10 /* needs two entries */
#define GDT_ENTRY_TLS_MIN 12
#define GDT_ENTRY_TLS_MAX 14

#define GDT_ENTRY_PER_CPU 15	/* Abused to load per CPU data from limit */
#define __PER_CPU_SEG	(GDT_ENTRY_PER_CPU * 8 + 3)

/* TLS indexes for 64bit - hardcoded in arch_prctl */
#define FS_TLS 0
#define GS_TLS 1

#define GS_TLS_SEL ((GDT_ENTRY_TLS_MIN+GS_TLS)*8 + 3)
#define FS_TLS_SEL ((GDT_ENTRY_TLS_MIN+FS_TLS)*8 + 3)

#define GDT_ENTRIES 16

#endif

#ifndef CONFIG_PARAVIRT
#define get_kernel_rpl()  0
#endif

/* User mode is privilege level 3 */
#define USER_RPL		0x3
/* LDT segment has TI set, GDT has it cleared */
#define SEGMENT_LDT		0x4
#define SEGMENT_GDT		0x0

/* Bottom two bits of selector give the ring privilege level */
#define SEGMENT_RPL_MASK	0x3
/* Bit 2 is table indicator (LDT/GDT) */
#define SEGMENT_TI_MASK		0x4

#define IDT_ENTRIES 256
#define GDT_SIZE (GDT_ENTRIES * 8)
#define GDT_ENTRY_TLS_ENTRIES 3
#define TLS_SIZE (GDT_ENTRY_TLS_ENTRIES * 8)

#endif