[SCSI] megaraid_mbox: remove scsi_assign_lock usage
also remove the adapter->host_lock alias for adapter->lock and remove
some superflous locking aswell as removing the tiny locking wrappers
for the EH routines.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c
index c9e743b..670c7a4 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c
@@ -533,8 +533,6 @@
// Initialize the synchronization lock for kernel and LLD
spin_lock_init(&adapter->lock);
- adapter->host_lock = &adapter->lock;
-
// Initialize the command queues: the list of free SCBs and the list
// of pending SCBs.
@@ -715,9 +713,6 @@
SCSIHOST2ADAP(host) = (caddr_t)adapter;
adapter->host = host;
- // export the parameters required by the mid-layer
- scsi_assign_lock(host, adapter->host_lock);
-
host->irq = adapter->irq;
host->unique_id = adapter->unique_id;
host->can_queue = adapter->max_cmds;
@@ -1560,10 +1555,6 @@
scp->scsi_done = done;
scp->result = 0;
- assert_spin_locked(adapter->host_lock);
-
- spin_unlock(adapter->host_lock);
-
/*
* Allocate and build a SCB request
* if_busy flag will be set if megaraid_mbox_build_cmd() command could
@@ -1573,23 +1564,16 @@
* return 0 in that case, and we would do the callback right away.
*/
if_busy = 0;
- scb = megaraid_mbox_build_cmd(adapter, scp, &if_busy);
-
- if (scb) {
- megaraid_mbox_runpendq(adapter, scb);
- }
-
- spin_lock(adapter->host_lock);
-
+ scb = megaraid_mbox_build_cmd(adapter, scp, &if_busy);
if (!scb) { // command already completed
done(scp);
return 0;
}
+ megaraid_mbox_runpendq(adapter, scb);
return if_busy;
}
-
/**
* megaraid_mbox_build_cmd - transform the mid-layer scsi command to megaraid
* firmware lingua
@@ -2546,9 +2530,7 @@
megaraid_dealloc_scb(adapter, scb);
// send the scsi packet back to kernel
- spin_lock(adapter->host_lock);
scp->scsi_done(scp);
- spin_unlock(adapter->host_lock);
}
return;
@@ -2563,7 +2545,7 @@
* aborted. All the commands issued to the F/W must complete.
**/
static int
-__megaraid_abort_handler(struct scsi_cmnd *scp)
+megaraid_abort_handler(struct scsi_cmnd *scp)
{
adapter_t *adapter;
mraid_device_t *raid_dev;
@@ -2577,8 +2559,6 @@
adapter = SCP2ADAPTER(scp);
raid_dev = ADAP2RAIDDEV(adapter);
- assert_spin_locked(adapter->host_lock);
-
con_log(CL_ANN, (KERN_WARNING
"megaraid: aborting-%ld cmd=%x <c=%d t=%d l=%d>\n",
scp->serial_number, scp->cmnd[0], SCP2CHANNEL(scp),
@@ -2658,6 +2638,7 @@
// traverse through the list of all SCB, since driver does not
// maintain these SCBs on any list
found = 0;
+ spin_lock_irq(&adapter->lock);
for (i = 0; i < MBOX_MAX_SCSI_CMDS; i++) {
scb = adapter->kscb_list + i;
@@ -2680,6 +2661,7 @@
}
}
}
+ spin_unlock_irq(&adapter->lock);
if (!found) {
con_log(CL_ANN, (KERN_WARNING
@@ -2696,22 +2678,6 @@
return FAILED;
}
-static int
-megaraid_abort_handler(struct scsi_cmnd *scp)
-{
- adapter_t *adapter;
- int rc;
-
- adapter = SCP2ADAPTER(scp);
-
- spin_lock_irq(adapter->host_lock);
- rc = __megaraid_abort_handler(scp);
- spin_unlock_irq(adapter->host_lock);
-
- return rc;
-}
-
-
/**
* megaraid_reset_handler - device reset hadler for mailbox based driver
* @scp : reference command
@@ -2723,7 +2689,7 @@
* host
**/
static int
-__megaraid_reset_handler(struct scsi_cmnd *scp)
+megaraid_reset_handler(struct scsi_cmnd *scp)
{
adapter_t *adapter;
scb_t *scb;
@@ -2739,10 +2705,6 @@
adapter = SCP2ADAPTER(scp);
raid_dev = ADAP2RAIDDEV(adapter);
- assert_spin_locked(adapter->host_lock);
-
- con_log(CL_ANN, (KERN_WARNING "megaraid: reseting the host...\n"));
-
// return failure if adapter is not responding
if (raid_dev->hw_error) {
con_log(CL_ANN, (KERN_NOTICE
@@ -2779,8 +2741,6 @@
adapter->outstanding_cmds, MBOX_RESET_WAIT));
}
- spin_unlock(adapter->host_lock);
-
recovery_window = MBOX_RESET_WAIT + MBOX_RESET_EXT_WAIT;
recovering = adapter->outstanding_cmds;
@@ -2806,7 +2766,7 @@
msleep(1000);
}
- spin_lock(adapter->host_lock);
+ spin_lock(&adapter->lock);
// If still outstanding commands, bail out
if (adapter->outstanding_cmds) {
@@ -2815,7 +2775,8 @@
raid_dev->hw_error = 1;
- return FAILED;
+ rval = FAILED;
+ goto out;
}
else {
con_log(CL_ANN, (KERN_NOTICE
@@ -2824,7 +2785,10 @@
// If the controller supports clustering, reset reservations
- if (!adapter->ha) return SUCCESS;
+ if (!adapter->ha) {
+ rval = SUCCESS;
+ goto out;
+ }
// clear reservations if any
raw_mbox[0] = CLUSTER_CMD;
@@ -2841,22 +2805,11 @@
"megaraid: reservation reset failed\n"));
}
+ out:
+ spin_unlock_irq(&adapter->lock);
return rval;
}
-static int
-megaraid_reset_handler(struct scsi_cmnd *cmd)
-{
- int rc;
-
- spin_lock_irq(cmd->device->host->host_lock);
- rc = __megaraid_reset_handler(cmd);
- spin_unlock_irq(cmd->device->host->host_lock);
-
- return rc;
-}
-
-
/*
* START: internal commands library
*
@@ -3776,9 +3729,9 @@
/*
* Set the quiescent flag to stop issuing cmds to FW.
*/
- spin_lock_irqsave(adapter->host_lock, flags);
+ spin_lock_irqsave(&adapter->lock, flags);
adapter->quiescent++;
- spin_unlock_irqrestore(adapter->host_lock, flags);
+ spin_unlock_irqrestore(&adapter->lock, flags);
/*
* Wait till there are no more cmds outstanding at FW. Try for at most