Merge tag 'mmc-v3.19-1' of git://git.linaro.org/people/ulf.hansson/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Consolidation and cleanups.
- Some improvements regarding error handling.
- Increase maximum amount of block devices.
- Use correct OCR mask for SDIO when restoring power.
- Fix prepared requests while doing BKOPS.
- Convert to modern PM ops.
- Add mmc_send_tuning() API and convert some hosts to use it.
MMC host:
- toshsd: New Toshiba PCI SD controller driver.
- sdhci: 64-bit ADMA support.
- sdhci: Some regulator fixes.
- sdhci: HS400 support.
- sdhci: Various fixes cleanups.
- atmel-mci: Modernization and cleanups.
- atmel-mci: Runtime PM support.
- omap_hsmmc: Modernization and cleanups.
- omap_hsmmc: Fix UHS card with DDR50 support.
- dw_mmc: Support for ARM64 and Exynos 7 variant.
- dw_mmc: Add support for IMG Pistachio variant.
- dw_mmc: Various fixes and cleanups.
- mvsdio: DMA fixes.
- mxs-mmc: Modernization and cleanups.
- mxcmmc: Various fixes"
* tag 'mmc-v3.19-1' of git://git.linaro.org/people/ulf.hansson/mmc: (126 commits)
mmc: sdhci-msm: Convert to mmc_send_tuning()
mmc: sdhci-esdhc-imx: Convert to mmc_send_tuning()
mmc: core: Let mmc_send_tuning() to take struct mmc_host* as parameter
mmc: queue: Improve error handling during allocation of bounce buffers
mmc: sdhci-acpi: Add two host capabilities for Intel
mmc: sdhci-pci: Add two host capabilities for BYT
mmc: sdhci-acpi: Add SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC
mmc: sdhci-pci: Add SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC to BYT
mmc: atmel-mci: use probe deferring if dma controller is not ready yet
mmc: atmel-mci: stop using specific initcall
mmc: atmel-mci: remove __init/__exit attributes
mmc: atmel-mci: remove useless DMA stuff for non-dt devices
mmc: omap_hsmmc: Fix UHS card with DDR50 support
mmc: core: add core-level function for sending tuning commands
mmc: core: hold SD Clock before CMD11 during Signal
mmc: mxs-mmc: Check for clk_prepare_enable() error
mmc: mxs-mmc: Propagate the real error
mmc: mxs-mmc: No need to do NULL check on 'iores'
mmc: dw_mmc: Add support for IMG Pistachio
mmc: mxs-mmc: Simplify PM hooks
...
diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
index 6cd3525..ee4fc05 100644
--- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
@@ -18,6 +18,10 @@
specific extensions.
- "samsung,exynos5420-dw-mshc": for controllers with Samsung Exynos5420
specific extensions.
+ - "samsung,exynos7-dw-mshc": for controllers with Samsung Exynos7
+ specific extensions.
+ - "samsung,exynos7-dw-mshc-smu": for controllers with Samsung Exynos7
+ specific extensions having an SMU.
* samsung,dw-mshc-ciu-div: Specifies the divider value for the card interface
unit (ciu) clock. This property is applicable only for Exynos5 SoC's and
diff --git a/Documentation/devicetree/bindings/mmc/img-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/img-dw-mshc.txt
new file mode 100644
index 0000000..85de99f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/img-dw-mshc.txt
@@ -0,0 +1,29 @@
+* Imagination specific extensions to the Synopsys Designware Mobile Storage
+ Host Controller
+
+The Synopsys designware mobile storage host controller is used to interface
+a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
+differences between the core Synopsys dw mshc controller properties described
+by synopsys-dw-mshc.txt and the properties used by the Imagination specific
+extensions to the Synopsys Designware Mobile Storage Host Controller.
+
+Required Properties:
+
+* compatible: should be
+ - "img,pistachio-dw-mshc": for Pistachio SoCs
+
+Example:
+
+ mmc@18142000 {
+ compatible = "img,pistachio-dw-mshc";
+ reg = <0x18142000 0x400>;
+ interrupts = <GIC_SHARED 39 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&system_clk>, <&sdhost_clk>;
+ clock-names = "biu", "ciu";
+
+ fifo-depth = <0x20>;
+ bus-width = <4>;
+ num-slots = <1>;
+ disable-wp;
+ };
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt b/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt
index 86223c3..4dd6deb 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt
@@ -12,6 +12,10 @@
* for "marvell,armada-380-sdhci", two register areas. The first one
for the SDHCI registers themselves, and the second one for the
AXI/Mbus bridge registers of the SDHCI unit.
+- clocks: Array of clocks required for SDHCI; requires at least one for
+ I/O clock.
+- clock-names: Array of names corresponding to clocks property; shall be
+ "io" for I/O clock and "core" for optional core clock.
Optional properties:
- mrvl,clk-delay-cycles: Specify a number of cycles to delay for tuning.
@@ -23,6 +27,8 @@
reg = <0xd4280800 0x800>;
bus-width = <8>;
interrupts = <27>;
+ clocks = <&chip CLKID_SDIO1XIN>, <&chip CLKID_SDIO1>;
+ clock-names = "io", "core";
non-removable;
mrvl,clk-delay-cycles = <31>;
};
@@ -32,5 +38,6 @@
reg = <0xd8000 0x1000>, <0xdc000 0x100>;
interrupts = <0 25 0x4>;
clocks = <&gateclk 17>;
+ clock-names = "io";
mrvl,clk-delay-cycles = <0x1F>;
};
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 21ab782..06ecbaf 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -19,6 +19,7 @@
#include <linux/i2c-gpio.h>
#include <linux/atmel-mci.h>
#include <linux/platform_data/crypto-atmel.h>
+#include <linux/platform_data/mmc-atmel-mci.h>
#include <linux/platform_data/at91_adc.h>
@@ -30,7 +31,6 @@
#include <mach/at91_matrix.h>
#include <mach/at91sam9_smc.h>
#include <linux/platform_data/dma-atmel.h>
-#include <mach/atmel-mci.h>
#include <mach/hardware.h>
#include <media/atmel-isi.h>
diff --git a/arch/arm/mach-at91/include/mach/atmel-mci.h b/arch/arm/mach-at91/include/mach/atmel-mci.h
deleted file mode 100644
index 3069e41..0000000
--- a/arch/arm/mach-at91/include/mach/atmel-mci.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef __MACH_ATMEL_MCI_H
-#define __MACH_ATMEL_MCI_H
-
-#include <linux/platform_data/dma-atmel.h>
-
-/**
- * struct mci_dma_data - DMA data for MCI interface
- */
-struct mci_dma_data {
- struct at_dma_slave sdata;
-};
-
-/* accessor macros */
-#define slave_data_ptr(s) (&(s)->sdata)
-#define find_slave_dev(s) ((s)->sdata.dma_dev)
-
-#endif /* __MACH_ATMEL_MCI_H */
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 97767a2..e0ad64f 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -21,8 +21,10 @@
#include <linux/i2c.h>
#include <linux/spi/spi.h>
#include <linux/usb/musb.h>
+#include <linux/mmc/host.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/platform_data/mtd-onenand-omap2.h>
+#include <linux/platform_data/mmc-omap.h>
#include <linux/mfd/menelaus.h>
#include <sound/tlv320aic3x.h>
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index ddfc8df..3d5040f 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -484,7 +484,7 @@
* Current flows to eMMC when eMMC is off and the data lines are pulled up,
* so pull them down. N.B. we pull 8 lines because we are using 8 lines.
*/
-static void rx51_mmc2_remux(struct device *dev, int slot, int power_on)
+static void rx51_mmc2_remux(struct device *dev, int power_on)
{
if (power_on)
omap_mux_write_array(partition, rx51_mmc2_on_mux);
@@ -500,7 +500,6 @@
.cover_only = true,
.gpio_cd = 160,
.gpio_wp = -EINVAL,
- .power_saving = true,
},
{
.name = "internal",
@@ -510,7 +509,6 @@
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
.nonremovable = true,
- .power_saving = true,
.remux = rx51_mmc2_remux,
},
{} /* Terminator */
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index 07d4c7b..dc6e79c 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -14,14 +14,15 @@
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/gpio.h>
+#include <linux/mmc/host.h>
#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/hsmmc-omap.h>
#include "soc.h"
#include "omap_device.h"
#include "omap-pm.h"
#include "mux.h"
-#include "mmc.h"
#include "hsmmc.h"
#include "control.h"
@@ -32,25 +33,14 @@
#define HSMMC_NAME_LEN 9
-#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
-
-static int hsmmc_get_context_loss(struct device *dev)
-{
- return omap_pm_get_dev_context_loss_count(dev);
-}
-
-#else
-#define hsmmc_get_context_loss NULL
-#endif
-
-static void omap_hsmmc1_before_set_reg(struct device *dev, int slot,
- int power_on, int vdd)
+static void omap_hsmmc1_before_set_reg(struct device *dev,
+ int power_on, int vdd)
{
u32 reg, prog_io;
- struct omap_mmc_platform_data *mmc = dev->platform_data;
+ struct omap_hsmmc_platform_data *mmc = dev->platform_data;
- if (mmc->slots[0].remux)
- mmc->slots[0].remux(dev, slot, power_on);
+ if (mmc->remux)
+ mmc->remux(dev, power_on);
/*
* Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
@@ -72,7 +62,7 @@
omap_ctrl_writel(reg, OMAP243X_CONTROL_DEVCONF1);
}
- if (mmc->slots[0].internal_clock) {
+ if (mmc->internal_clock) {
reg = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
reg |= OMAP2_MMCSDIO1ADPCLKISEL;
omap_ctrl_writel(reg, OMAP2_CONTROL_DEVCONF0);
@@ -96,8 +86,7 @@
}
}
-static void omap_hsmmc1_after_set_reg(struct device *dev, int slot,
- int power_on, int vdd)
+static void omap_hsmmc1_after_set_reg(struct device *dev, int power_on, int vdd)
{
u32 reg;
@@ -120,34 +109,32 @@
}
}
-static void hsmmc2_select_input_clk_src(struct omap_mmc_platform_data *mmc)
+static void hsmmc2_select_input_clk_src(struct omap_hsmmc_platform_data *mmc)
{
u32 reg;
reg = omap_ctrl_readl(control_devconf1_offset);
- if (mmc->slots[0].internal_clock)
+ if (mmc->internal_clock)
reg |= OMAP2_MMCSDIO2ADPCLKISEL;
else
reg &= ~OMAP2_MMCSDIO2ADPCLKISEL;
omap_ctrl_writel(reg, control_devconf1_offset);
}
-static void hsmmc2_before_set_reg(struct device *dev, int slot,
- int power_on, int vdd)
+static void hsmmc2_before_set_reg(struct device *dev, int power_on, int vdd)
{
- struct omap_mmc_platform_data *mmc = dev->platform_data;
+ struct omap_hsmmc_platform_data *mmc = dev->platform_data;
- if (mmc->slots[0].remux)
- mmc->slots[0].remux(dev, slot, power_on);
+ if (mmc->remux)
+ mmc->remux(dev, power_on);
if (power_on)
hsmmc2_select_input_clk_src(mmc);
}
-static int am35x_hsmmc2_set_power(struct device *dev, int slot,
- int power_on, int vdd)
+static int am35x_hsmmc2_set_power(struct device *dev, int power_on, int vdd)
{
- struct omap_mmc_platform_data *mmc = dev->platform_data;
+ struct omap_hsmmc_platform_data *mmc = dev->platform_data;
if (power_on)
hsmmc2_select_input_clk_src(mmc);
@@ -155,23 +142,22 @@
return 0;
}
-static int nop_mmc_set_power(struct device *dev, int slot, int power_on,
- int vdd)
+static int nop_mmc_set_power(struct device *dev, int power_on, int vdd)
{
return 0;
}
-static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller,
- int controller_nr)
+static inline void omap_hsmmc_mux(struct omap_hsmmc_platform_data
+ *mmc_controller, int controller_nr)
{
- if (gpio_is_valid(mmc_controller->slots[0].switch_pin) &&
- (mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES))
- omap_mux_init_gpio(mmc_controller->slots[0].switch_pin,
- OMAP_PIN_INPUT_PULLUP);
- if (gpio_is_valid(mmc_controller->slots[0].gpio_wp) &&
- (mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES))
- omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp,
- OMAP_PIN_INPUT_PULLUP);
+ if (gpio_is_valid(mmc_controller->switch_pin) &&
+ (mmc_controller->switch_pin < OMAP_MAX_GPIO_LINES))
+ omap_mux_init_gpio(mmc_controller->switch_pin,
+ OMAP_PIN_INPUT_PULLUP);
+ if (gpio_is_valid(mmc_controller->gpio_wp) &&
+ (mmc_controller->gpio_wp < OMAP_MAX_GPIO_LINES))
+ omap_mux_init_gpio(mmc_controller->gpio_wp,
+ OMAP_PIN_INPUT_PULLUP);
if (cpu_is_omap34xx()) {
if (controller_nr == 0) {
omap_mux_init_signal("sdmmc1_clk",
@@ -180,7 +166,7 @@
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc1_dat0",
OMAP_PIN_INPUT_PULLUP);
- if (mmc_controller->slots[0].caps &
+ if (mmc_controller->caps &
(MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) {
omap_mux_init_signal("sdmmc1_dat1",
OMAP_PIN_INPUT_PULLUP);
@@ -189,7 +175,7 @@
omap_mux_init_signal("sdmmc1_dat3",
OMAP_PIN_INPUT_PULLUP);
}
- if (mmc_controller->slots[0].caps &
+ if (mmc_controller->caps &
MMC_CAP_8_BIT_DATA) {
omap_mux_init_signal("sdmmc1_dat4",
OMAP_PIN_INPUT_PULLUP);
@@ -214,7 +200,7 @@
* For 8 wire configurations, Lines DAT4, 5, 6 and 7
* need to be muxed in the board-*.c files
*/
- if (mmc_controller->slots[0].caps &
+ if (mmc_controller->caps &
(MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) {
omap_mux_init_signal("sdmmc2_dat1",
OMAP_PIN_INPUT_PULLUP);
@@ -223,7 +209,7 @@
omap_mux_init_signal("sdmmc2_dat3",
OMAP_PIN_INPUT_PULLUP);
}
- if (mmc_controller->slots[0].caps &
+ if (mmc_controller->caps &
MMC_CAP_8_BIT_DATA) {
omap_mux_init_signal("sdmmc2_dat4.sdmmc2_dat4",
OMAP_PIN_INPUT_PULLUP);
@@ -243,7 +229,7 @@
}
static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
- struct omap_mmc_platform_data *mmc)
+ struct omap_hsmmc_platform_data *mmc)
{
char *hc_name;
@@ -259,38 +245,22 @@
else
snprintf(hc_name, (HSMMC_NAME_LEN + 1), "mmc%islot%i",
c->mmc, 1);
- mmc->slots[0].name = hc_name;
- mmc->nr_slots = 1;
- mmc->slots[0].caps = c->caps;
- mmc->slots[0].pm_caps = c->pm_caps;
- mmc->slots[0].internal_clock = !c->ext_clock;
- mmc->max_freq = c->max_freq;
+ mmc->name = hc_name;
+ mmc->caps = c->caps;
+ mmc->internal_clock = !c->ext_clock;
mmc->reg_offset = 0;
- mmc->get_context_loss_count = hsmmc_get_context_loss;
- mmc->slots[0].switch_pin = c->gpio_cd;
- mmc->slots[0].gpio_wp = c->gpio_wp;
+ mmc->switch_pin = c->gpio_cd;
+ mmc->gpio_wp = c->gpio_wp;
- mmc->slots[0].remux = c->remux;
- mmc->slots[0].init_card = c->init_card;
+ mmc->remux = c->remux;
+ mmc->init_card = c->init_card;
if (c->cover_only)
- mmc->slots[0].cover = 1;
+ mmc->cover = 1;
if (c->nonremovable)
- mmc->slots[0].nonremovable = 1;
-
- if (c->power_saving)
- mmc->slots[0].power_saving = 1;
-
- if (c->no_off)
- mmc->slots[0].no_off = 1;
-
- if (c->no_off_init)
- mmc->slots[0].no_regulator_off_init = c->no_off_init;
-
- if (c->vcc_aux_disable_is_sleep)
- mmc->slots[0].vcc_aux_disable_is_sleep = 1;
+ mmc->nonremovable = 1;
/*
* NOTE: MMC slots should have a Vcc regulator set up.
@@ -300,42 +270,42 @@
* temporary HACK: ocr_mask instead of fixed supply
*/
if (soc_is_am35xx())
- mmc->slots[0].ocr_mask = MMC_VDD_165_195 |
+ mmc->ocr_mask = MMC_VDD_165_195 |
MMC_VDD_26_27 |
MMC_VDD_27_28 |
MMC_VDD_29_30 |
MMC_VDD_30_31 |
MMC_VDD_31_32;
else
- mmc->slots[0].ocr_mask = c->ocr_mask;
+ mmc->ocr_mask = c->ocr_mask;
if (!soc_is_am35xx())
- mmc->slots[0].features |= HSMMC_HAS_PBIAS;
+ mmc->features |= HSMMC_HAS_PBIAS;
switch (c->mmc) {
case 1:
- if (mmc->slots[0].features & HSMMC_HAS_PBIAS) {
+ if (mmc->features & HSMMC_HAS_PBIAS) {
/* on-chip level shifting via PBIAS0/PBIAS1 */
- mmc->slots[0].before_set_reg =
+ mmc->before_set_reg =
omap_hsmmc1_before_set_reg;
- mmc->slots[0].after_set_reg =
+ mmc->after_set_reg =
omap_hsmmc1_after_set_reg;
}
if (soc_is_am35xx())
- mmc->slots[0].set_power = nop_mmc_set_power;
+ mmc->set_power = nop_mmc_set_power;
/* OMAP3630 HSMMC1 supports only 4-bit */
if (cpu_is_omap3630() &&
(c->caps & MMC_CAP_8_BIT_DATA)) {
c->caps &= ~MMC_CAP_8_BIT_DATA;
c->caps |= MMC_CAP_4_BIT_DATA;
- mmc->slots[0].caps = c->caps;
+ mmc->caps = c->caps;
}
break;
case 2:
if (soc_is_am35xx())
- mmc->slots[0].set_power = am35x_hsmmc2_set_power;
+ mmc->set_power = am35x_hsmmc2_set_power;
if (c->ext_clock)
c->transceiver = 1;
@@ -343,17 +313,17 @@
c->caps &= ~MMC_CAP_8_BIT_DATA;
c->caps |= MMC_CAP_4_BIT_DATA;
}
- if (mmc->slots[0].features & HSMMC_HAS_PBIAS) {
+ if (mmc->features & HSMMC_HAS_PBIAS) {
/* off-chip level shifting, or none */
- mmc->slots[0].before_set_reg = hsmmc2_before_set_reg;
- mmc->slots[0].after_set_reg = NULL;
+ mmc->before_set_reg = hsmmc2_before_set_reg;
+ mmc->after_set_reg = NULL;
}
break;
case 3:
case 4:
case 5:
- mmc->slots[0].before_set_reg = NULL;
- mmc->slots[0].after_set_reg = NULL;
+ mmc->before_set_reg = NULL;
+ mmc->after_set_reg = NULL;
break;
default:
pr_err("MMC%d configuration not supported!\n", c->mmc);
@@ -368,7 +338,7 @@
void omap_hsmmc_late_init(struct omap2_hsmmc_info *c)
{
struct platform_device *pdev;
- struct omap_mmc_platform_data *mmc_pdata;
+ struct omap_hsmmc_platform_data *mmc_pdata;
int res;
if (omap_hsmmc_done != 1)
@@ -388,8 +358,8 @@
if (!mmc_pdata)
continue;
- mmc_pdata->slots[0].switch_pin = c->gpio_cd;
- mmc_pdata->slots[0].gpio_wp = c->gpio_wp;
+ mmc_pdata->switch_pin = c->gpio_cd;
+ mmc_pdata->gpio_wp = c->gpio_wp;
res = omap_device_register(pdev);
if (res)
@@ -408,12 +378,12 @@
struct omap_device *od;
struct platform_device *pdev;
char oh_name[MAX_OMAP_MMC_HWMOD_NAME_LEN];
- struct omap_mmc_platform_data *mmc_data;
- struct omap_mmc_dev_attr *mmc_dev_attr;
+ struct omap_hsmmc_platform_data *mmc_data;
+ struct omap_hsmmc_dev_attr *mmc_dev_attr;
char *name;
int res;
- mmc_data = kzalloc(sizeof(struct omap_mmc_platform_data), GFP_KERNEL);
+ mmc_data = kzalloc(sizeof(*mmc_data), GFP_KERNEL);
if (!mmc_data) {
pr_err("Cannot allocate memory for mmc device!\n");
return;
@@ -463,7 +433,7 @@
}
res = platform_device_add_data(pdev, mmc_data,
- sizeof(struct omap_mmc_platform_data));
+ sizeof(struct omap_hsmmc_platform_data));
if (res) {
pr_err("Could not add pdata for %s\n", name);
goto put_pdev;
@@ -489,7 +459,7 @@
platform_device_put(pdev);
free_name:
- kfree(mmc_data->slots[0].name);
+ kfree(mmc_data->name);
free_mmc:
kfree(mmc_data);
diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h
index 7f2e790..148cd9b 100644
--- a/arch/arm/mach-omap2/hsmmc.h
+++ b/arch/arm/mach-omap2/hsmmc.h
@@ -12,25 +12,18 @@
u8 mmc; /* controller 1/2/3 */
u32 caps; /* 4/8 wires and any additional host
* capabilities OR'd (ref. linux/mmc/host.h) */
- u32 pm_caps; /* PM capabilities */
bool transceiver; /* MMC-2 option */
bool ext_clock; /* use external pin for input clock */
bool cover_only; /* No card detect - just cover switch */
bool nonremovable; /* Nonremovable e.g. eMMC */
- bool power_saving; /* Try to sleep or power off when possible */
- bool no_off; /* power_saving and power is not to go off */
- bool no_off_init; /* no power off when not in MMC sleep state */
- bool vcc_aux_disable_is_sleep; /* Regulator off remapped to sleep */
bool deferred; /* mmc needs a deferred probe */
int gpio_cd; /* or -EINVAL */
int gpio_wp; /* or -EINVAL */
char *name; /* or NULL for default */
struct platform_device *pdev; /* mmc controller instance */
int ocr_mask; /* temporary HACK */
- int max_freq; /* maximum clock, if constrained by external
- * circuitry, or 0 for default */
/* Remux (pad configuration) when powering on/off */
- void (*remux)(struct device *dev, int slot, int power_on);
+ void (*remux)(struct device *dev, int power_on);
/* init some special card */
void (*init_card)(struct mmc_card *card);
};
diff --git a/arch/arm/mach-omap2/mmc.h b/arch/arm/mach-omap2/mmc.h
index 0cd4b08..30d39b9 100644
--- a/arch/arm/mach-omap2/mmc.h
+++ b/arch/arm/mach-omap2/mmc.h
@@ -1,5 +1,3 @@
-#include <linux/mmc/host.h>
-#include <linux/platform_data/mmc-omap.h>
#define OMAP24XX_NR_MMC 2
#define OMAP2420_MMC_SIZE OMAP1_MMC_SIZE
@@ -7,14 +5,6 @@
#define OMAP4_MMC_REG_OFFSET 0x100
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
-void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data);
-#else
-static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
-{
-}
-#endif
-
struct omap_hwmod;
int omap_msdi_reset(struct omap_hwmod *oh);
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 16b20ce..b7cb44a 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -36,7 +36,6 @@
#include "soc.h"
#include "iomap.h"
#include "common.h"
-#include "mmc.h"
#include "prminst44xx.h"
#include "prcm_mpu44xx.h"
#include "omap4-sar-layout.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index c2555cb..79127b3 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -15,12 +15,12 @@
#include <linux/i2c-omap.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
+#include <linux/platform_data/hsmmc-omap.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/omap-dma.h>
#include <plat/dmtimer.h>
#include "omap_hwmod.h"
-#include "mmc.h"
#include "l3_2xxx.h"
#include "soc.h"
@@ -372,7 +372,7 @@
{ .role = "dbck", .clk = "mmchsdb1_fck" },
};
-static struct omap_mmc_dev_attr mmc1_dev_attr = {
+static struct omap_hsmmc_dev_attr mmc1_dev_attr = {
.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
index a579b89..cabc569 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
@@ -15,10 +15,10 @@
*/
#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/hsmmc-omap.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include "omap_hwmod.h"
#include "i2c.h"
-#include "mmc.h"
#include "wd_timer.h"
#include "cm33xx.h"
#include "prm33xx.h"
@@ -836,7 +836,7 @@
};
/* mmc0 */
-static struct omap_mmc_dev_attr am33xx_mmc0_dev_attr = {
+static struct omap_hsmmc_dev_attr am33xx_mmc0_dev_attr = {
.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
};
@@ -854,7 +854,7 @@
};
/* mmc1 */
-static struct omap_mmc_dev_attr am33xx_mmc1_dev_attr = {
+static struct omap_hsmmc_dev_attr am33xx_mmc1_dev_attr = {
.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
};
@@ -872,7 +872,7 @@
};
/* mmc2 */
-static struct omap_mmc_dev_attr am33xx_mmc2_dev_attr = {
+static struct omap_hsmmc_dev_attr am33xx_mmc2_dev_attr = {
.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
};
struct omap_hwmod am33xx_mmc2_hwmod = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index 6b406ca..0cf7b56 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -27,7 +27,6 @@
#include "prm33xx.h"
#include "prm-regbits-33xx.h"
#include "i2c.h"
-#include "mmc.h"
#include "wd_timer.h"
#include "omap_hwmod_33xx_43xx_common_data.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 2a78b09..11468ee 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -18,6 +18,7 @@
#include <linux/i2c-omap.h>
#include <linux/power/smartreflex.h>
#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/hsmmc-omap.h>
#include <linux/omap-dma.h>
#include "l3_3xxx.h"
@@ -37,7 +38,6 @@
#include "cm-regbits-34xx.h"
#include "i2c.h"
-#include "mmc.h"
#include "wd_timer.h"
#include "serial.h"
@@ -1786,12 +1786,12 @@
{ .role = "dbck", .clk = "omap_32k_fck", },
};
-static struct omap_mmc_dev_attr mmc1_dev_attr = {
+static struct omap_hsmmc_dev_attr mmc1_dev_attr = {
.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
};
/* See 35xx errata 2.1.1.128 in SPRZ278F */
-static struct omap_mmc_dev_attr mmc1_pre_es3_dev_attr = {
+static struct omap_hsmmc_dev_attr mmc1_pre_es3_dev_attr = {
.flags = (OMAP_HSMMC_SUPPORTS_DUAL_VOLT |
OMAP_HSMMC_BROKEN_MULTIBLOCK_READ),
};
@@ -1854,7 +1854,7 @@
};
/* See 35xx errata 2.1.1.128 in SPRZ278F */
-static struct omap_mmc_dev_attr mmc2_pre_es3_dev_attr = {
+static struct omap_hsmmc_dev_attr mmc2_pre_es3_dev_attr = {
.flags = OMAP_HSMMC_BROKEN_MULTIBLOCK_READ,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 44e5634..d8a3cf1 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -22,6 +22,7 @@
#include <linux/io.h>
#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/hsmmc-omap.h>
#include <linux/power/smartreflex.h>
#include <linux/i2c-omap.h>
@@ -39,7 +40,6 @@
#include "prm44xx.h"
#include "prm-regbits-44xx.h"
#include "i2c.h"
-#include "mmc.h"
#include "wd_timer.h"
/* Base offset for all OMAP4 interrupts external to MPUSS */
@@ -1952,7 +1952,7 @@
};
/* mmc1 dev_attr */
-static struct omap_mmc_dev_attr mmc1_dev_attr = {
+static struct omap_hsmmc_dev_attr mmc1_dev_attr = {
.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
index 1103aa0..5ec786a 100644
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -19,6 +19,7 @@
#include <linux/io.h>
#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/hsmmc-omap.h>
#include <linux/power/smartreflex.h>
#include <linux/i2c-omap.h>
@@ -33,7 +34,6 @@
#include "cm2_54xx.h"
#include "prm54xx.h"
#include "i2c.h"
-#include "mmc.h"
#include "wd_timer.h"
/* Base offset for all OMAP5 interrupts external to MPUSS */
@@ -1269,7 +1269,7 @@
};
/* mmc1 dev_attr */
-static struct omap_mmc_dev_attr mmc1_dev_attr = {
+static struct omap_hsmmc_dev_attr mmc1_dev_attr = {
.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index 5684f11..711c97e 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -19,6 +19,7 @@
#include <linux/io.h>
#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/hsmmc-omap.h>
#include <linux/power/smartreflex.h>
#include <linux/i2c-omap.h>
@@ -33,7 +34,6 @@
#include "cm2_7xx.h"
#include "prm7xx.h"
#include "i2c.h"
-#include "mmc.h"
#include "wd_timer.h"
#include "soc.h"
@@ -1301,7 +1301,7 @@
};
/* mmc1 dev_attr */
-static struct omap_mmc_dev_attr mmc1_dev_attr = {
+static struct omap_hsmmc_dev_attr mmc1_dev_attr = {
.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
};
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 37b7560..cc92cdb 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -17,7 +17,7 @@
#include <linux/spi/spi.h>
#include <linux/usb/atmel_usba_udc.h>
-#include <mach/atmel-mci.h>
+#include <linux/platform_data/mmc-atmel-mci.h>
#include <linux/atmel-mci.h>
#include <asm/io.h>
diff --git a/arch/avr32/mach-at32ap/include/mach/atmel-mci.h b/arch/avr32/mach-at32ap/include/mach/atmel-mci.h
deleted file mode 100644
index 11d7f4b..0000000
--- a/arch/avr32/mach-at32ap/include/mach/atmel-mci.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef __MACH_ATMEL_MCI_H
-#define __MACH_ATMEL_MCI_H
-
-#include <linux/platform_data/dma-dw.h>
-
-/**
- * struct mci_dma_data - DMA data for MCI interface
- */
-struct mci_dma_data {
- struct dw_dma_slave sdata;
-};
-
-/* accessor macros */
-#define slave_data_ptr(s) (&(s)->sdata)
-#define find_slave_dev(s) ((s)->sdata.dma_dev)
-
-#endif /* __MACH_ATMEL_MCI_H */
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 1fa4c80..4409d79 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -78,13 +78,16 @@
/*
* We've only got one major, so number of mmcblk devices is
- * limited to 256 / number of minors per device.
+ * limited to (1 << 20) / number of minors per device. It is also
+ * currently limited by the size of the static bitmaps below.
*/
static int max_devices;
-/* 256 minors, so at most 256 separate devices */
-static DECLARE_BITMAP(dev_use, 256);
-static DECLARE_BITMAP(name_use, 256);
+#define MAX_DEVICES 256
+
+/* TODO: Replace these with struct ida */
+static DECLARE_BITMAP(dev_use, MAX_DEVICES);
+static DECLARE_BITMAP(name_use, MAX_DEVICES);
/*
* There is one mmc_blk_data per slot.
@@ -112,7 +115,7 @@
/*
* Only set in main mmc_blk_data associated
- * with mmc_card with mmc_set_drvdata, and keeps
+ * with mmc_card with dev_set_drvdata, and keeps
* track of the current selected device partition.
*/
unsigned int part_curr;
@@ -260,7 +263,7 @@
int ret;
struct mmc_blk_data *md = mmc_blk_get(dev_to_disk(dev));
- ret = snprintf(buf, PAGE_SIZE, "%d",
+ ret = snprintf(buf, PAGE_SIZE, "%d\n",
get_disk_ro(dev_to_disk(dev)) ^
md->read_only);
mmc_blk_put(md);
@@ -642,7 +645,7 @@
struct mmc_blk_data *md)
{
int ret;
- struct mmc_blk_data *main_md = mmc_get_drvdata(card);
+ struct mmc_blk_data *main_md = dev_get_drvdata(&card->dev);
if (main_md->part_curr == md->part_type)
return 0;
@@ -1004,7 +1007,8 @@
err = mmc_hw_reset(host);
/* Ensure we switch back to the correct partition */
if (err != -EOPNOTSUPP) {
- struct mmc_blk_data *main_md = mmc_get_drvdata(host->card);
+ struct mmc_blk_data *main_md =
+ dev_get_drvdata(&host->card->dev);
int part_err;
main_md->part_curr = main_md->part_type;
@@ -1308,19 +1312,11 @@
}
if (status & R1_EXCEPTION_EVENT) {
- ext_csd = kzalloc(512, GFP_KERNEL);
- if (!ext_csd) {
- pr_err("%s: unable to allocate buffer for ext_csd\n",
- req->rq_disk->disk_name);
- return -ENOMEM;
- }
-
- err = mmc_send_ext_csd(card, ext_csd);
+ err = mmc_get_ext_csd(card, &ext_csd);
if (err) {
pr_err("%s: error %d sending ext_csd\n",
req->rq_disk->disk_name, err);
- check = MMC_BLK_ABORT;
- goto free;
+ return MMC_BLK_ABORT;
}
if ((ext_csd[EXT_CSD_EXP_EVENTS_STATUS] &
@@ -1338,7 +1334,6 @@
req->rq_disk->disk_name, packed->nr_entries,
packed->blocks, packed->idx_failure);
}
-free:
kfree(ext_csd);
}
@@ -2093,7 +2088,7 @@
/*
* !subname implies we are creating main mmc_blk_data that will be
- * associated with mmc_card with mmc_set_drvdata. Due to device
+ * associated with mmc_card with dev_set_drvdata. Due to device
* partitions, devidx will not coincide with a per-physical card
* index anymore so we keep track of a name index.
*/
@@ -2425,8 +2420,9 @@
END_FIXUP
};
-static int mmc_blk_probe(struct mmc_card *card)
+static int mmc_blk_probe(struct device *dev)
{
+ struct mmc_card *card = mmc_dev_to_card(dev);
struct mmc_blk_data *md, *part_md;
char cap_str[10];
@@ -2451,7 +2447,7 @@
if (mmc_blk_alloc_parts(card, md))
goto out;
- mmc_set_drvdata(card, md);
+ dev_set_drvdata(dev, md);
if (mmc_add_disk(md))
goto out;
@@ -2481,9 +2477,10 @@
return 0;
}
-static void mmc_blk_remove(struct mmc_card *card)
+static int mmc_blk_remove(struct device *dev)
{
- struct mmc_blk_data *md = mmc_get_drvdata(card);
+ struct mmc_card *card = mmc_dev_to_card(dev);
+ struct mmc_blk_data *md = dev_get_drvdata(dev);
mmc_blk_remove_parts(card, md);
pm_runtime_get_sync(&card->dev);
@@ -2494,13 +2491,15 @@
pm_runtime_disable(&card->dev);
pm_runtime_put_noidle(&card->dev);
mmc_blk_remove_req(md);
- mmc_set_drvdata(card, NULL);
+ dev_set_drvdata(dev, NULL);
+
+ return 0;
}
-static int _mmc_blk_suspend(struct mmc_card *card)
+static int _mmc_blk_suspend(struct device *dev)
{
struct mmc_blk_data *part_md;
- struct mmc_blk_data *md = mmc_get_drvdata(card);
+ struct mmc_blk_data *md = dev_get_drvdata(dev);
if (md) {
mmc_queue_suspend(&md->queue);
@@ -2511,21 +2510,21 @@
return 0;
}
-static void mmc_blk_shutdown(struct mmc_card *card)
+static void mmc_blk_shutdown(struct device *dev)
{
- _mmc_blk_suspend(card);
+ _mmc_blk_suspend(dev);
}
-#ifdef CONFIG_PM
-static int mmc_blk_suspend(struct mmc_card *card)
+#ifdef CONFIG_PM_SLEEP
+static int mmc_blk_suspend(struct device *dev)
{
- return _mmc_blk_suspend(card);
+ return _mmc_blk_suspend(dev);
}
-static int mmc_blk_resume(struct mmc_card *card)
+static int mmc_blk_resume(struct device *dev)
{
struct mmc_blk_data *part_md;
- struct mmc_blk_data *md = mmc_get_drvdata(card);
+ struct mmc_blk_data *md = dev_get_drvdata(dev);
if (md) {
/*
@@ -2540,19 +2539,15 @@
}
return 0;
}
-#else
-#define mmc_blk_suspend NULL
-#define mmc_blk_resume NULL
#endif
-static struct mmc_driver mmc_driver = {
- .drv = {
- .name = "mmcblk",
- },
+static SIMPLE_DEV_PM_OPS(mmc_blk_pm_ops, mmc_blk_suspend, mmc_blk_resume);
+
+static struct device_driver mmc_driver = {
+ .name = "mmcblk",
+ .pm = &mmc_blk_pm_ops,
.probe = mmc_blk_probe,
.remove = mmc_blk_remove,
- .suspend = mmc_blk_suspend,
- .resume = mmc_blk_resume,
.shutdown = mmc_blk_shutdown,
};
@@ -2563,7 +2558,7 @@
if (perdev_minors != CONFIG_MMC_BLOCK_MINORS)
pr_info("mmcblk: using %d minors per device\n", perdev_minors);
- max_devices = 256 / perdev_minors;
+ max_devices = min(MAX_DEVICES, (1 << MINORBITS) / perdev_minors);
res = register_blkdev(MMC_BLOCK_MAJOR, "mmc");
if (res)
diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c
index 0c0fc52..0a7430f 100644
--- a/drivers/mmc/card/mmc_test.c
+++ b/drivers/mmc/card/mmc_test.c
@@ -14,6 +14,7 @@
#include <linux/mmc/host.h>
#include <linux/mmc/mmc.h>
#include <linux/slab.h>
+#include <linux/device.h>
#include <linux/scatterlist.h>
#include <linux/swap.h> /* For nr_free_buffer_pages() */
@@ -32,6 +33,8 @@
#define BUFFER_ORDER 2
#define BUFFER_SIZE (PAGE_SIZE << BUFFER_ORDER)
+#define TEST_ALIGN_END 8
+
/*
* Limit the test area size to the maximum MMC HC erase group size. Note that
* the maximum SD allocation unit size is just 4MiB.
@@ -1174,7 +1177,7 @@
int ret, i;
struct scatterlist sg;
- for (i = 1;i < 4;i++) {
+ for (i = 1; i < TEST_ALIGN_END; i++) {
sg_init_one(&sg, test->buffer + i, 512);
ret = mmc_test_transfer(test, &sg, 1, 0, 1, 512, 1);
if (ret)
@@ -1189,7 +1192,7 @@
int ret, i;
struct scatterlist sg;
- for (i = 1;i < 4;i++) {
+ for (i = 1; i < TEST_ALIGN_END; i++) {
sg_init_one(&sg, test->buffer + i, 512);
ret = mmc_test_transfer(test, &sg, 1, 0, 1, 512, 0);
if (ret)
@@ -1216,7 +1219,7 @@
if (size < 1024)
return RESULT_UNSUP_HOST;
- for (i = 1;i < 4;i++) {
+ for (i = 1; i < TEST_ALIGN_END; i++) {
sg_init_one(&sg, test->buffer + i, size);
ret = mmc_test_transfer(test, &sg, 1, 0, size/512, 512, 1);
if (ret)
@@ -1243,7 +1246,7 @@
if (size < 1024)
return RESULT_UNSUP_HOST;
- for (i = 1;i < 4;i++) {
+ for (i = 1; i < TEST_ALIGN_END; i++) {
sg_init_one(&sg, test->buffer + i, size);
ret = mmc_test_transfer(test, &sg, 1, 0, size/512, 512, 0);
if (ret)
@@ -2997,8 +3000,9 @@
return ret;
}
-static int mmc_test_probe(struct mmc_card *card)
+static int mmc_test_probe(struct device *dev)
{
+ struct mmc_card *card = mmc_dev_to_card(dev);
int ret;
if (!mmc_card_mmc(card) && !mmc_card_sd(card))
@@ -3013,20 +3017,22 @@
return 0;
}
-static void mmc_test_remove(struct mmc_card *card)
+static int mmc_test_remove(struct device *dev)
{
+ struct mmc_card *card = mmc_dev_to_card(dev);
+
mmc_test_free_result(card);
mmc_test_free_dbgfs_file(card);
+
+ return 0;
}
-static void mmc_test_shutdown(struct mmc_card *card)
+static void mmc_test_shutdown(struct device *dev)
{
}
-static struct mmc_driver mmc_driver = {
- .drv = {
- .name = "mmc_test",
- },
+static struct device_driver mmc_driver = {
+ .name = "mmc_test",
.probe = mmc_test_probe,
.remove = mmc_test_remove,
.shutdown = mmc_test_shutdown,
diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
index cfa6110..236d194 100644
--- a/drivers/mmc/card/queue.c
+++ b/drivers/mmc/card/queue.c
@@ -232,13 +232,15 @@
if (!mqrq_cur->bounce_buf) {
pr_warn("%s: unable to allocate bounce cur buffer\n",
mmc_card_name(card));
- }
- mqrq_prev->bounce_buf = kmalloc(bouncesz, GFP_KERNEL);
- if (!mqrq_prev->bounce_buf) {
- pr_warn("%s: unable to allocate bounce prev buffer\n",
- mmc_card_name(card));
- kfree(mqrq_cur->bounce_buf);
- mqrq_cur->bounce_buf = NULL;
+ } else {
+ mqrq_prev->bounce_buf =
+ kmalloc(bouncesz, GFP_KERNEL);
+ if (!mqrq_prev->bounce_buf) {
+ pr_warn("%s: unable to allocate bounce prev buffer\n",
+ mmc_card_name(card));
+ kfree(mqrq_cur->bounce_buf);
+ mqrq_cur->bounce_buf = NULL;
+ }
}
}
diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c
index 8a1f124..5ca562c 100644
--- a/drivers/mmc/core/bus.c
+++ b/drivers/mmc/core/bus.c
@@ -25,8 +25,6 @@
#include "sdio_cis.h"
#include "bus.h"
-#define to_mmc_driver(d) container_of(d, struct mmc_driver, drv)
-
static ssize_t type_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -106,33 +104,14 @@
return retval;
}
-static int mmc_bus_probe(struct device *dev)
-{
- struct mmc_driver *drv = to_mmc_driver(dev->driver);
- struct mmc_card *card = mmc_dev_to_card(dev);
-
- return drv->probe(card);
-}
-
-static int mmc_bus_remove(struct device *dev)
-{
- struct mmc_driver *drv = to_mmc_driver(dev->driver);
- struct mmc_card *card = mmc_dev_to_card(dev);
-
- drv->remove(card);
-
- return 0;
-}
-
static void mmc_bus_shutdown(struct device *dev)
{
- struct mmc_driver *drv = to_mmc_driver(dev->driver);
struct mmc_card *card = mmc_dev_to_card(dev);
struct mmc_host *host = card->host;
int ret;
- if (dev->driver && drv->shutdown)
- drv->shutdown(card);
+ if (dev->driver && dev->driver->shutdown)
+ dev->driver->shutdown(dev);
if (host->bus_ops->shutdown) {
ret = host->bus_ops->shutdown(host);
@@ -145,16 +124,13 @@
#ifdef CONFIG_PM_SLEEP
static int mmc_bus_suspend(struct device *dev)
{
- struct mmc_driver *drv = to_mmc_driver(dev->driver);
struct mmc_card *card = mmc_dev_to_card(dev);
struct mmc_host *host = card->host;
int ret;
- if (dev->driver && drv->suspend) {
- ret = drv->suspend(card);
- if (ret)
- return ret;
- }
+ ret = pm_generic_suspend(dev);
+ if (ret)
+ return ret;
ret = host->bus_ops->suspend(host);
return ret;
@@ -162,7 +138,6 @@
static int mmc_bus_resume(struct device *dev)
{
- struct mmc_driver *drv = to_mmc_driver(dev->driver);
struct mmc_card *card = mmc_dev_to_card(dev);
struct mmc_host *host = card->host;
int ret;
@@ -172,9 +147,7 @@
pr_warn("%s: error %d during resume (card was removed?)\n",
mmc_hostname(host), ret);
- if (dev->driver && drv->resume)
- ret = drv->resume(card);
-
+ ret = pm_generic_resume(dev);
return ret;
}
#endif
@@ -207,8 +180,6 @@
.dev_groups = mmc_dev_groups,
.match = mmc_bus_match,
.uevent = mmc_bus_uevent,
- .probe = mmc_bus_probe,
- .remove = mmc_bus_remove,
.shutdown = mmc_bus_shutdown,
.pm = &mmc_bus_pm_ops,
};
@@ -227,24 +198,22 @@
* mmc_register_driver - register a media driver
* @drv: MMC media driver
*/
-int mmc_register_driver(struct mmc_driver *drv)
+int mmc_register_driver(struct device_driver *drv)
{
- drv->drv.bus = &mmc_bus_type;
- return driver_register(&drv->drv);
+ drv->bus = &mmc_bus_type;
+ return driver_register(drv);
}
-
EXPORT_SYMBOL(mmc_register_driver);
/**
* mmc_unregister_driver - unregister a media driver
* @drv: MMC media driver
*/
-void mmc_unregister_driver(struct mmc_driver *drv)
+void mmc_unregister_driver(struct device_driver *drv)
{
- drv->drv.bus = &mmc_bus_type;
- driver_unregister(&drv->drv);
+ drv->bus = &mmc_bus_type;
+ driver_unregister(drv);
}
-
EXPORT_SYMBOL(mmc_unregister_driver);
static void mmc_release_card(struct device *dev)
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index f26a5f1..9584bff 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -149,6 +149,14 @@
led_trigger_event(host->led, LED_OFF);
+ if (mrq->sbc) {
+ pr_debug("%s: req done <CMD%u>: %d: %08x %08x %08x %08x\n",
+ mmc_hostname(host), mrq->sbc->opcode,
+ mrq->sbc->error,
+ mrq->sbc->resp[0], mrq->sbc->resp[1],
+ mrq->sbc->resp[2], mrq->sbc->resp[3]);
+ }
+
pr_debug("%s: req done (CMD%u): %d: %08x %08x %08x %08x\n",
mmc_hostname(host), cmd->opcode, err,
cmd->resp[0], cmd->resp[1],
@@ -214,6 +222,10 @@
mrq->cmd->error = 0;
mrq->cmd->mrq = mrq;
+ if (mrq->sbc) {
+ mrq->sbc->error = 0;
+ mrq->sbc->mrq = mrq;
+ }
if (mrq->data) {
BUG_ON(mrq->data->blksz > host->max_blk_size);
BUG_ON(mrq->data->blocks > host->max_blk_count);
@@ -538,8 +550,18 @@
if (host->card && mmc_card_mmc(host->card) &&
((mmc_resp_type(host->areq->mrq->cmd) == MMC_RSP_R1) ||
(mmc_resp_type(host->areq->mrq->cmd) == MMC_RSP_R1B)) &&
- (host->areq->mrq->cmd->resp[0] & R1_EXCEPTION_EVENT))
+ (host->areq->mrq->cmd->resp[0] & R1_EXCEPTION_EVENT)) {
+
+ /* Cancel the prepared request */
+ if (areq)
+ mmc_post_req(host, areq->mrq, -EINVAL);
+
mmc_start_bkops(host->card, true);
+
+ /* prepare the request again */
+ if (areq)
+ mmc_pre_req(host, areq->mrq, !host->areq);
+ }
}
if (!err && areq)
@@ -709,27 +731,16 @@
int err;
u8 *ext_csd;
- /*
- * In future work, we should consider storing the entire ext_csd.
- */
- ext_csd = kmalloc(512, GFP_KERNEL);
- if (!ext_csd) {
- pr_err("%s: could not allocate buffer to receive the ext_csd.\n",
- mmc_hostname(card->host));
- return -ENOMEM;
- }
-
mmc_claim_host(card->host);
- err = mmc_send_ext_csd(card, ext_csd);
+ err = mmc_get_ext_csd(card, &ext_csd);
mmc_release_host(card->host);
if (err)
- goto out;
+ return err;
card->ext_csd.raw_bkops_status = ext_csd[EXT_CSD_BKOPS_STATUS];
card->ext_csd.raw_exception_status = ext_csd[EXT_CSD_EXP_EVENTS_STATUS];
-out:
kfree(ext_csd);
- return err;
+ return 0;
}
EXPORT_SYMBOL(mmc_read_bkops_status);
@@ -1088,6 +1099,22 @@
mmc_host_clk_release(host);
}
+/*
+ * Set initial state after a power cycle or a hw_reset.
+ */
+void mmc_set_initial_state(struct mmc_host *host)
+{
+ if (mmc_host_is_spi(host))
+ host->ios.chip_select = MMC_CS_HIGH;
+ else
+ host->ios.chip_select = MMC_CS_DONTCARE;
+ host->ios.bus_mode = MMC_BUSMODE_PUSHPULL;
+ host->ios.bus_width = MMC_BUS_WIDTH_1;
+ host->ios.timing = MMC_TIMING_LEGACY;
+
+ mmc_set_ios(host);
+}
+
/**
* mmc_vdd_to_ocrbitnum - Convert a voltage to the OCR bit number
* @vdd: voltage (mV)
@@ -1420,18 +1447,20 @@
pr_warn("%s: cannot verify signal voltage switch\n",
mmc_hostname(host));
+ mmc_host_clk_hold(host);
+
cmd.opcode = SD_SWITCH_VOLTAGE;
cmd.arg = 0;
cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
err = mmc_wait_for_cmd(host, &cmd, 0);
if (err)
- return err;
+ goto err_command;
- if (!mmc_host_is_spi(host) && (cmd.resp[0] & R1_ERROR))
- return -EIO;
-
- mmc_host_clk_hold(host);
+ if (!mmc_host_is_spi(host) && (cmd.resp[0] & R1_ERROR)) {
+ err = -EIO;
+ goto err_command;
+ }
/*
* The card should drive cmd and dat[0:3] low immediately
* after the response of cmd11, but wait 1 ms to be sure
@@ -1480,6 +1509,7 @@
mmc_power_cycle(host, ocr);
}
+err_command:
mmc_host_clk_release(host);
return err;
@@ -1526,15 +1556,9 @@
mmc_host_clk_hold(host);
host->ios.vdd = fls(ocr) - 1;
- if (mmc_host_is_spi(host))
- host->ios.chip_select = MMC_CS_HIGH;
- else
- host->ios.chip_select = MMC_CS_DONTCARE;
- host->ios.bus_mode = MMC_BUSMODE_PUSHPULL;
host->ios.power_mode = MMC_POWER_UP;
- host->ios.bus_width = MMC_BUS_WIDTH_1;
- host->ios.timing = MMC_TIMING_LEGACY;
- mmc_set_ios(host);
+ /* Set initial state and call mmc_set_ios */
+ mmc_set_initial_state(host);
/* Try to set signal voltage to 3.3V but fall back to 1.8v or 1.2v */
if (__mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330) == 0)
@@ -1574,14 +1598,9 @@
host->ios.clock = 0;
host->ios.vdd = 0;
- if (!mmc_host_is_spi(host)) {
- host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
- host->ios.chip_select = MMC_CS_DONTCARE;
- }
host->ios.power_mode = MMC_POWER_OFF;
- host->ios.bus_width = MMC_BUS_WIDTH_1;
- host->ios.timing = MMC_TIMING_LEGACY;
- mmc_set_ios(host);
+ /* Set initial state and call mmc_set_ios */
+ mmc_set_initial_state(host);
/*
* Some configurations, such as the 802.11 SDIO card in the OLPC
@@ -2259,30 +2278,16 @@
/* If the reset has happened, then a status command will fail */
if (check) {
- struct mmc_command cmd = {0};
- int err;
+ u32 status;
- cmd.opcode = MMC_SEND_STATUS;
- if (!mmc_host_is_spi(card->host))
- cmd.arg = card->rca << 16;
- cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC;
- err = mmc_wait_for_cmd(card->host, &cmd, 0);
- if (!err) {
+ if (!mmc_send_status(card, &status)) {
mmc_host_clk_release(host);
return -ENOSYS;
}
}
- if (mmc_host_is_spi(host)) {
- host->ios.chip_select = MMC_CS_HIGH;
- host->ios.bus_mode = MMC_BUSMODE_PUSHPULL;
- } else {
- host->ios.chip_select = MMC_CS_DONTCARE;
- host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
- }
- host->ios.bus_width = MMC_BUS_WIDTH_1;
- host->ios.timing = MMC_TIMING_LEGACY;
- mmc_set_ios(host);
+ /* Set initial state and call mmc_set_ios */
+ mmc_set_initial_state(host);
mmc_host_clk_release(host);
diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h
index 443a584..d76597c 100644
--- a/drivers/mmc/core/core.h
+++ b/drivers/mmc/core/core.h
@@ -49,6 +49,7 @@
void mmc_power_up(struct mmc_host *host, u32 ocr);
void mmc_power_off(struct mmc_host *host);
void mmc_power_cycle(struct mmc_host *host, u32 ocr);
+void mmc_set_initial_state(struct mmc_host *host);
static inline void mmc_delay(unsigned int ms)
{
diff --git a/drivers/mmc/core/debugfs.c b/drivers/mmc/core/debugfs.c
index 91eb162..e914210 100644
--- a/drivers/mmc/core/debugfs.c
+++ b/drivers/mmc/core/debugfs.c
@@ -291,14 +291,8 @@
if (!buf)
return -ENOMEM;
- ext_csd = kmalloc(512, GFP_KERNEL);
- if (!ext_csd) {
- err = -ENOMEM;
- goto out_free;
- }
-
mmc_get_card(card);
- err = mmc_send_ext_csd(card, ext_csd);
+ err = mmc_get_ext_csd(card, &ext_csd);
mmc_put_card(card);
if (err)
goto out_free;
@@ -314,7 +308,6 @@
out_free:
kfree(buf);
- kfree(ext_csd);
return err;
}
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index a301a78..02ad792 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -177,65 +177,6 @@
return 0;
}
-/*
- * Read extended CSD.
- */
-static int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd)
-{
- int err;
- u8 *ext_csd;
-
- BUG_ON(!card);
- BUG_ON(!new_ext_csd);
-
- *new_ext_csd = NULL;
-
- if (card->csd.mmca_vsn < CSD_SPEC_VER_4)
- return 0;
-
- /*
- * As the ext_csd is so large and mostly unused, we don't store the
- * raw block in mmc_card.
- */
- ext_csd = kmalloc(512, GFP_KERNEL);
- if (!ext_csd) {
- pr_err("%s: could not allocate a buffer to "
- "receive the ext_csd.\n", mmc_hostname(card->host));
- return -ENOMEM;
- }
-
- err = mmc_send_ext_csd(card, ext_csd);
- if (err) {
- kfree(ext_csd);
- *new_ext_csd = NULL;
-
- /* If the host or the card can't do the switch,
- * fail more gracefully. */
- if ((err != -EINVAL)
- && (err != -ENOSYS)
- && (err != -EFAULT))
- return err;
-
- /*
- * High capacity cards should have this "magic" size
- * stored in their CSD.
- */
- if (card->csd.capacity == (4096 * 512)) {
- pr_err("%s: unable to read EXT_CSD "
- "on a possible high capacity card. "
- "Card will be ignored.\n",
- mmc_hostname(card->host));
- } else {
- pr_warn("%s: unable to read EXT_CSD, performance might suffer\n",
- mmc_hostname(card->host));
- err = 0;
- }
- } else
- *new_ext_csd = ext_csd;
-
- return err;
-}
-
static void mmc_select_card_type(struct mmc_card *card)
{
struct mmc_host *host = card->host;
@@ -391,16 +332,11 @@
/*
* Decode extended CSD.
*/
-static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
+static int mmc_decode_ext_csd(struct mmc_card *card, u8 *ext_csd)
{
int err = 0, idx;
unsigned int part_size;
- BUG_ON(!card);
-
- if (!ext_csd)
- return 0;
-
/* Version is coded in the CSD_STRUCTURE byte in the EXT_CSD register */
card->ext_csd.raw_ext_csd_structure = ext_csd[EXT_CSD_STRUCTURE];
if (card->csd.structure == 3) {
@@ -628,15 +564,55 @@
card->ext_csd.data_sector_size = 512;
}
+ /* eMMC v5 or later */
+ if (card->ext_csd.rev >= 7) {
+ memcpy(card->ext_csd.fwrev, &ext_csd[EXT_CSD_FIRMWARE_VERSION],
+ MMC_FIRMWARE_LEN);
+ card->ext_csd.ffu_capable =
+ (ext_csd[EXT_CSD_SUPPORTED_MODE] & 0x1) &&
+ !(ext_csd[EXT_CSD_FW_CONFIG] & 0x1);
+ }
out:
return err;
}
-static inline void mmc_free_ext_csd(u8 *ext_csd)
+static int mmc_read_ext_csd(struct mmc_card *card)
{
- kfree(ext_csd);
-}
+ u8 *ext_csd;
+ int err;
+ if (!mmc_can_ext_csd(card))
+ return 0;
+
+ err = mmc_get_ext_csd(card, &ext_csd);
+ if (err) {
+ /* If the host or the card can't do the switch,
+ * fail more gracefully. */
+ if ((err != -EINVAL)
+ && (err != -ENOSYS)
+ && (err != -EFAULT))
+ return err;
+
+ /*
+ * High capacity cards should have this "magic" size
+ * stored in their CSD.
+ */
+ if (card->csd.capacity == (4096 * 512)) {
+ pr_err("%s: unable to read EXT_CSD on a possible high capacity card. Card will be ignored.\n",
+ mmc_hostname(card->host));
+ } else {
+ pr_warn("%s: unable to read EXT_CSD, performance might suffer\n",
+ mmc_hostname(card->host));
+ err = 0;
+ }
+
+ return err;
+ }
+
+ err = mmc_decode_ext_csd(card, ext_csd);
+ kfree(ext_csd);
+ return err;
+}
static int mmc_compare_ext_csds(struct mmc_card *card, unsigned bus_width)
{
@@ -647,11 +623,8 @@
return 0;
err = mmc_get_ext_csd(card, &bw_ext_csd);
-
- if (err || bw_ext_csd == NULL) {
- err = -EINVAL;
- goto out;
- }
+ if (err)
+ return err;
/* only compare read only fields */
err = !((card->ext_csd.raw_partition_support ==
@@ -710,8 +683,7 @@
if (err)
err = -EINVAL;
-out:
- mmc_free_ext_csd(bw_ext_csd);
+ kfree(bw_ext_csd);
return err;
}
@@ -722,7 +694,7 @@
MMC_DEV_ATTR(date, "%02d/%04d\n", card->cid.month, card->cid.year);
MMC_DEV_ATTR(erase_size, "%u\n", card->erase_size << 9);
MMC_DEV_ATTR(preferred_erase_size, "%u\n", card->pref_erase << 9);
-MMC_DEV_ATTR(fwrev, "0x%x\n", card->cid.fwrev);
+MMC_DEV_ATTR(ffu_capable, "%d\n", card->ext_csd.ffu_capable);
MMC_DEV_ATTR(hwrev, "0x%x\n", card->cid.hwrev);
MMC_DEV_ATTR(manfid, "0x%06x\n", card->cid.manfid);
MMC_DEV_ATTR(name, "%s\n", card->cid.prod_name);
@@ -735,6 +707,22 @@
MMC_DEV_ATTR(raw_rpmb_size_mult, "%#x\n", card->ext_csd.raw_rpmb_size_mult);
MMC_DEV_ATTR(rel_sectors, "%#x\n", card->ext_csd.rel_sectors);
+static ssize_t mmc_fwrev_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct mmc_card *card = mmc_dev_to_card(dev);
+
+ if (card->ext_csd.rev < 7) {
+ return sprintf(buf, "0x%x\n", card->cid.fwrev);
+ } else {
+ return sprintf(buf, "0x%*phN\n", MMC_FIRMWARE_LEN,
+ card->ext_csd.fwrev);
+ }
+}
+
+static DEVICE_ATTR(fwrev, S_IRUGO, mmc_fwrev_show, NULL);
+
static struct attribute *mmc_std_attrs[] = {
&dev_attr_cid.attr,
&dev_attr_csd.attr,
@@ -742,6 +730,7 @@
&dev_attr_erase_size.attr,
&dev_attr_preferred_erase_size.attr,
&dev_attr_fwrev.attr,
+ &dev_attr_ffu_capable.attr,
&dev_attr_hwrev.attr,
&dev_attr_manfid.attr,
&dev_attr_name.attr,
@@ -774,14 +763,6 @@
unsigned int pwrclass_val = 0;
int err = 0;
- /* Power class selection is supported for versions >= 4.0 */
- if (card->csd.mmca_vsn < CSD_SPEC_VER_4)
- return 0;
-
- /* Power class values are defined only for 4/8 bit bus */
- if (bus_width == EXT_CSD_BUS_WIDTH_1)
- return 0;
-
switch (1 << host->ios.vdd) {
case MMC_VDD_165_195:
if (host->ios.clock <= MMC_HIGH_26_MAX_DTR)
@@ -844,7 +825,7 @@
int err, ddr;
/* Power class selection is supported for versions >= 4.0 */
- if (card->csd.mmca_vsn < CSD_SPEC_VER_4)
+ if (!mmc_can_ext_csd(card))
return 0;
bus_width = host->ios.bus_width;
@@ -905,7 +886,7 @@
unsigned idx, bus_width = 0;
int err = 0;
- if ((card->csd.mmca_vsn < CSD_SPEC_VER_4) &&
+ if (!mmc_can_ext_csd(card) &&
!(host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)))
return 0;
@@ -998,7 +979,7 @@
ext_csd_bits,
card->ext_csd.generic_cmd6_time);
if (err) {
- pr_warn("%s: switch to bus width %d ddr failed\n",
+ pr_err("%s: switch to bus width %d ddr failed\n",
mmc_hostname(host), 1 << bus_width);
return err;
}
@@ -1069,7 +1050,7 @@
card->ext_csd.generic_cmd6_time,
true, true, true);
if (err) {
- pr_warn("%s: switch to high-speed from hs200 failed, err:%d\n",
+ pr_err("%s: switch to high-speed from hs200 failed, err:%d\n",
mmc_hostname(host), err);
return err;
}
@@ -1079,7 +1060,7 @@
EXT_CSD_DDR_BUS_WIDTH_8,
card->ext_csd.generic_cmd6_time);
if (err) {
- pr_warn("%s: switch to bus width for hs400 failed, err:%d\n",
+ pr_err("%s: switch to bus width for hs400 failed, err:%d\n",
mmc_hostname(host), err);
return err;
}
@@ -1089,7 +1070,7 @@
card->ext_csd.generic_cmd6_time,
true, true, true);
if (err) {
- pr_warn("%s: switch to hs400 failed, err:%d\n",
+ pr_err("%s: switch to hs400 failed, err:%d\n",
mmc_hostname(host), err);
return err;
}
@@ -1146,8 +1127,7 @@
{
int err = 0;
- if ((card->csd.mmca_vsn < CSD_SPEC_VER_4 &&
- card->ext_csd.hs_max_dtr == 0))
+ if (!mmc_can_ext_csd(card))
goto bus_speed;
if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200)
@@ -1232,7 +1212,7 @@
mmc_host_clk_release(host);
if (err)
- pr_warn("%s: tuning execution failed\n",
+ pr_err("%s: tuning execution failed\n",
mmc_hostname(host));
}
@@ -1252,7 +1232,6 @@
int err;
u32 cid[4];
u32 rocr;
- u8 *ext_csd = NULL;
BUG_ON(!host);
WARN_ON(!host->claimed);
@@ -1361,14 +1340,8 @@
}
if (!oldcard) {
- /*
- * Fetch and process extended CSD.
- */
-
- err = mmc_get_ext_csd(card, &ext_csd);
- if (err)
- goto free_card;
- err = mmc_read_ext_csd(card, ext_csd);
+ /* Read extended CSD. */
+ err = mmc_read_ext_csd(card);
if (err)
goto free_card;
@@ -1458,18 +1431,18 @@
if (mmc_card_hs200(card)) {
err = mmc_hs200_tuning(card);
if (err)
- goto err;
+ goto free_card;
err = mmc_select_hs400(card);
if (err)
- goto err;
+ goto free_card;
} else if (mmc_card_hs(card)) {
/* Select the desired bus width optionally */
err = mmc_select_bus_width(card);
if (!IS_ERR_VALUE(err)) {
err = mmc_select_hs_ddr(card);
if (err)
- goto err;
+ goto free_card;
}
}
@@ -1545,15 +1518,12 @@
if (!oldcard)
host->card = card;
- mmc_free_ext_csd(ext_csd);
return 0;
free_card:
if (!oldcard)
mmc_remove_card(card);
err:
- mmc_free_ext_csd(ext_csd);
-
return err;
}
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index 7911e05..3b044c5 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -264,20 +264,6 @@
struct mmc_command cmd = {0};
struct mmc_data data = {0};
struct scatterlist sg;
- void *data_buf;
- int is_on_stack;
-
- is_on_stack = object_is_on_stack(buf);
- if (is_on_stack) {
- /*
- * dma onto stack is unsafe/nonportable, but callers to this
- * routine normally provide temporary on-stack buffers ...
- */
- data_buf = kmalloc(len, GFP_KERNEL);
- if (!data_buf)
- return -ENOMEM;
- } else
- data_buf = buf;
mrq.cmd = &cmd;
mrq.data = &data;
@@ -298,7 +284,7 @@
data.sg = &sg;
data.sg_len = 1;
- sg_init_one(&sg, data_buf, len);
+ sg_init_one(&sg, buf, len);
if (opcode == MMC_SEND_CSD || opcode == MMC_SEND_CID) {
/*
@@ -312,11 +298,6 @@
mmc_wait_for_req(host, &mrq);
- if (is_on_stack) {
- memcpy(buf, data_buf, len);
- kfree(data_buf);
- }
-
if (cmd.error)
return cmd.error;
if (data.error)
@@ -334,7 +315,7 @@
return mmc_send_cxd_native(card->host, card->rca << 16,
csd, MMC_SEND_CSD);
- csd_tmp = kmalloc(16, GFP_KERNEL);
+ csd_tmp = kzalloc(16, GFP_KERNEL);
if (!csd_tmp)
return -ENOMEM;
@@ -362,7 +343,7 @@
cid, MMC_SEND_CID);
}
- cid_tmp = kmalloc(16, GFP_KERNEL);
+ cid_tmp = kzalloc(16, GFP_KERNEL);
if (!cid_tmp)
return -ENOMEM;
@@ -378,12 +359,35 @@
return ret;
}
-int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd)
+int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd)
{
- return mmc_send_cxd_data(card, card->host, MMC_SEND_EXT_CSD,
- ext_csd, 512);
+ int err;
+ u8 *ext_csd;
+
+ if (!card || !new_ext_csd)
+ return -EINVAL;
+
+ if (!mmc_can_ext_csd(card))
+ return -EOPNOTSUPP;
+
+ /*
+ * As the ext_csd is so large and mostly unused, we don't store the
+ * raw block in mmc_card.
+ */
+ ext_csd = kzalloc(512, GFP_KERNEL);
+ if (!ext_csd)
+ return -ENOMEM;
+
+ err = mmc_send_cxd_data(card, card->host, MMC_SEND_EXT_CSD, ext_csd,
+ 512);
+ if (err)
+ kfree(ext_csd);
+ else
+ *new_ext_csd = ext_csd;
+
+ return err;
}
-EXPORT_SYMBOL_GPL(mmc_send_ext_csd);
+EXPORT_SYMBOL_GPL(mmc_get_ext_csd);
int mmc_spi_read_ocr(struct mmc_host *host, int highcap, u32 *ocrp)
{
@@ -543,6 +547,75 @@
}
EXPORT_SYMBOL_GPL(mmc_switch);
+int mmc_send_tuning(struct mmc_host *host)
+{
+ struct mmc_request mrq = {NULL};
+ struct mmc_command cmd = {0};
+ struct mmc_data data = {0};
+ struct scatterlist sg;
+ struct mmc_ios *ios = &host->ios;
+ const u8 *tuning_block_pattern;
+ int size, err = 0;
+ u8 *data_buf;
+ u32 opcode;
+
+ if (ios->bus_width == MMC_BUS_WIDTH_8) {
+ tuning_block_pattern = tuning_blk_pattern_8bit;
+ size = sizeof(tuning_blk_pattern_8bit);
+ opcode = MMC_SEND_TUNING_BLOCK_HS200;
+ } else if (ios->bus_width == MMC_BUS_WIDTH_4) {
+ tuning_block_pattern = tuning_blk_pattern_4bit;
+ size = sizeof(tuning_blk_pattern_4bit);
+ opcode = MMC_SEND_TUNING_BLOCK;
+ } else
+ return -EINVAL;
+
+ data_buf = kzalloc(size, GFP_KERNEL);
+ if (!data_buf)
+ return -ENOMEM;
+
+ mrq.cmd = &cmd;
+ mrq.data = &data;
+
+ cmd.opcode = opcode;
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
+
+ data.blksz = size;
+ data.blocks = 1;
+ data.flags = MMC_DATA_READ;
+
+ /*
+ * According to the tuning specs, Tuning process
+ * is normally shorter 40 executions of CMD19,
+ * and timeout value should be shorter than 150 ms
+ */
+ data.timeout_ns = 150 * NSEC_PER_MSEC;
+
+ data.sg = &sg;
+ data.sg_len = 1;
+ sg_init_one(&sg, data_buf, size);
+
+ mmc_wait_for_req(host, &mrq);
+
+ if (cmd.error) {
+ err = cmd.error;
+ goto out;
+ }
+
+ if (data.error) {
+ err = data.error;
+ goto out;
+ }
+
+ if (memcmp(data_buf, tuning_block_pattern, size))
+ err = -EIO;
+
+out:
+ kfree(data_buf);
+ return err;
+}
+EXPORT_SYMBOL_GPL(mmc_send_tuning);
+
static int
mmc_send_bus_test(struct mmc_card *card, struct mmc_host *host, u8 opcode,
u8 len)
@@ -675,3 +748,8 @@
return 0;
}
+
+int mmc_can_ext_csd(struct mmc_card *card)
+{
+ return (card && card->csd.mmca_vsn > CSD_SPEC_VER_3);
+}
diff --git a/drivers/mmc/core/mmc_ops.h b/drivers/mmc/core/mmc_ops.h
index 390dac6..6f4b00e 100644
--- a/drivers/mmc/core/mmc_ops.h
+++ b/drivers/mmc/core/mmc_ops.h
@@ -20,13 +20,13 @@
int mmc_all_send_cid(struct mmc_host *host, u32 *cid);
int mmc_set_relative_addr(struct mmc_card *card);
int mmc_send_csd(struct mmc_card *card, u32 *csd);
-int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd);
int mmc_send_status(struct mmc_card *card, u32 *status);
int mmc_send_cid(struct mmc_host *host, u32 *cid);
int mmc_spi_read_ocr(struct mmc_host *host, int highcap, u32 *ocrp);
int mmc_spi_set_crc(struct mmc_host *host, int use_crc);
int mmc_bus_test(struct mmc_card *card, u8 bus_width);
int mmc_send_hpi_cmd(struct mmc_card *card, u32 *status);
+int mmc_can_ext_csd(struct mmc_card *card);
#endif
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index 2439e71..fd0750b 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -980,8 +980,12 @@
if (mmc_card_is_removable(host) || !mmc_card_keep_power(host)) {
sdio_reset(host);
mmc_go_idle(host);
- err = mmc_sdio_init_card(host, host->card->ocr, host->card,
- mmc_card_keep_power(host));
+ mmc_send_if_cond(host, host->card->ocr);
+ err = mmc_send_io_op_cond(host, 0, NULL);
+ if (!err)
+ err = mmc_sdio_init_card(host, host->card->ocr,
+ host->card,
+ mmc_card_keep_power(host));
} else if (mmc_card_keep_power(host) && mmc_card_wake_sdio_irq(host)) {
/* We may have switched to 1-bit mode during suspend */
err = sdio_enable_4bit_bus(host->card);
@@ -1035,7 +1039,7 @@
sdio_reset(host);
mmc_go_idle(host);
- mmc_send_if_cond(host, host->ocr_avail);
+ mmc_send_if_cond(host, host->card->ocr);
ret = mmc_send_io_op_cond(host, 0, NULL);
if (ret)
diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c
index 6da97b1..6088531 100644
--- a/drivers/mmc/core/sdio_bus.c
+++ b/drivers/mmc/core/sdio_bus.c
@@ -26,6 +26,8 @@
#include "sdio_cis.h"
#include "sdio_bus.h"
+#define to_sdio_driver(d) container_of(d, struct sdio_driver, drv)
+
/* show configuration fields */
#define sdio_config_attr(field, format_string) \
static ssize_t \
@@ -196,8 +198,6 @@
return ret;
}
-#ifdef CONFIG_PM
-
static const struct dev_pm_ops sdio_bus_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(pm_generic_suspend, pm_generic_resume)
SET_RUNTIME_PM_OPS(
@@ -207,14 +207,6 @@
)
};
-#define SDIO_PM_OPS_PTR (&sdio_bus_pm_ops)
-
-#else /* !CONFIG_PM */
-
-#define SDIO_PM_OPS_PTR NULL
-
-#endif /* !CONFIG_PM */
-
static struct bus_type sdio_bus_type = {
.name = "sdio",
.dev_groups = sdio_dev_groups,
@@ -222,7 +214,7 @@
.uevent = sdio_bus_uevent,
.probe = sdio_bus_probe,
.remove = sdio_bus_remove,
- .pm = SDIO_PM_OPS_PTR,
+ .pm = &sdio_bus_pm_ops,
};
int sdio_register_bus(void)
@@ -295,7 +287,7 @@
static void sdio_acpi_set_handle(struct sdio_func *func)
{
struct mmc_host *host = func->card->host;
- u64 addr = (host->slotno << 16) | func->num;
+ u64 addr = ((u64)host->slotno << 16) | func->num;
acpi_preset_companion(&func->dev, ACPI_COMPANION(host->parent), addr);
}
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 1386065..2d6fbdd 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -580,7 +580,7 @@
config MMC_DW
tristate "Synopsys DesignWare Memory Card Interface"
depends on HAS_DMA
- depends on ARC || ARM || MIPS || COMPILE_TEST
+ depends on ARC || ARM || ARM64 || MIPS || COMPILE_TEST
help
This selects support for the Synopsys DesignWare Mobile Storage IP
block, this provides host support for SD and MMC interfaces, in both
@@ -748,3 +748,8 @@
help
This selects support for the SD/MMC Host Controller on
Allwinner sunxi SoCs.
+
+config MMC_TOSHIBA_PCI
+ tristate "Toshiba Type A SD/MMC Card Interface Driver"
+ depends on PCI
+ help
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index b09ecfb..f7b0a77 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -55,6 +55,7 @@
obj-$(CONFIG_MMC_MOXART) += moxart-mmc.o
obj-$(CONFIG_MMC_SUNXI) += sunxi-mmc.o
obj-$(CONFIG_MMC_USDHI6ROL0) += usdhi6rol0.o
+obj-$(CONFIG_MMC_TOSHIBA_PCI) += toshsd.o
obj-$(CONFIG_MMC_REALTEK_PCI) += rtsx_pci_sdmmc.o
obj-$(CONFIG_MMC_REALTEK_USB) += rtsx_usb_sdmmc.o
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 77250d4..62aba9a 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -30,13 +30,16 @@
#include <linux/stat.h>
#include <linux/types.h>
#include <linux/platform_data/atmel.h>
+#include <linux/platform_data/mmc-atmel-mci.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sdio.h>
-#include <mach/atmel-mci.h>
#include <linux/atmel-mci.h>
#include <linux/atmel_pdc.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/pinctrl/consumer.h>
#include <asm/cacheflush.h>
#include <asm/io.h>
@@ -44,6 +47,8 @@
#include "atmel-mci-regs.h"
+#define AUTOSUSPEND_DELAY 50
+
#define ATMCI_DATA_ERROR_FLAGS (ATMCI_DCRCE | ATMCI_DTOE | ATMCI_OVRE | ATMCI_UNRE)
#define ATMCI_DMA_THRESHOLD 16
@@ -386,20 +391,19 @@
if (!buf)
return -ENOMEM;
+ pm_runtime_get_sync(&host->pdev->dev);
+
/*
* Grab a more or less consistent snapshot. Note that we're
* not disabling interrupts, so IMR and SR may not be
* consistent.
*/
- ret = clk_prepare_enable(host->mck);
- if (ret)
- goto out;
-
spin_lock_bh(&host->lock);
memcpy_fromio(buf, host->regs, ATMCI_REGS_SIZE);
spin_unlock_bh(&host->lock);
- clk_disable_unprepare(host->mck);
+ pm_runtime_mark_last_busy(&host->pdev->dev);
+ pm_runtime_put_autosuspend(&host->pdev->dev);
seq_printf(s, "MR:\t0x%08x%s%s ",
buf[ATMCI_MR / 4],
@@ -449,7 +453,6 @@
val & ATMCI_CFG_LSYNC ? " LSYNC" : "");
}
-out:
kfree(buf);
return ret;
@@ -560,6 +563,9 @@
pdata->slot[slot_id].detect_is_active_high =
of_property_read_bool(cnp, "cd-inverted");
+ pdata->slot[slot_id].non_removable =
+ of_property_read_bool(cnp, "non-removable");
+
pdata->slot[slot_id].wp_pin =
of_get_named_gpio(cnp, "wp-gpios", 0);
}
@@ -1252,6 +1258,8 @@
WARN_ON(slot->mrq);
dev_dbg(&host->pdev->dev, "MRQ: cmd %u\n", mrq->cmd->opcode);
+ pm_runtime_get_sync(&host->pdev->dev);
+
/*
* We may "know" the card is gone even though there's still an
* electrical connection. If so, we really need to communicate
@@ -1281,7 +1289,8 @@
struct atmel_mci_slot *slot = mmc_priv(mmc);
struct atmel_mci *host = slot->host;
unsigned int i;
- bool unprepare_clk;
+
+ pm_runtime_get_sync(&host->pdev->dev);
slot->sdc_reg &= ~ATMCI_SDCBUS_MASK;
switch (ios->bus_width) {
@@ -1297,13 +1306,8 @@
unsigned int clock_min = ~0U;
u32 clkdiv;
- clk_prepare(host->mck);
- unprepare_clk = true;
-
spin_lock_bh(&host->lock);
if (!host->mode_reg) {
- clk_enable(host->mck);
- unprepare_clk = false;
atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN);
if (host->caps.has_cfg_reg)
@@ -1371,8 +1375,6 @@
} else {
bool any_slot_active = false;
- unprepare_clk = false;
-
spin_lock_bh(&host->lock);
slot->clock = 0;
for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
@@ -1385,17 +1387,12 @@
atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIDIS);
if (host->mode_reg) {
atmci_readl(host, ATMCI_MR);
- clk_disable(host->mck);
- unprepare_clk = true;
}
host->mode_reg = 0;
}
spin_unlock_bh(&host->lock);
}
- if (unprepare_clk)
- clk_unprepare(host->mck);
-
switch (ios->power_mode) {
case MMC_POWER_OFF:
if (!IS_ERR(mmc->supply.vmmc))
@@ -1421,6 +1418,9 @@
*/
break;
}
+
+ pm_runtime_mark_last_busy(&host->pdev->dev);
+ pm_runtime_put_autosuspend(&host->pdev->dev);
}
static int atmci_get_ro(struct mmc_host *mmc)
@@ -1512,6 +1512,9 @@
spin_unlock(&host->lock);
mmc_request_done(prev_mmc, mrq);
spin_lock(&host->lock);
+
+ pm_runtime_mark_last_busy(&host->pdev->dev);
+ pm_runtime_put_autosuspend(&host->pdev->dev);
}
static void atmci_command_complete(struct atmel_mci *host,
@@ -2137,7 +2140,7 @@
return IRQ_HANDLED;
}
-static int __init atmci_init_slot(struct atmel_mci *host,
+static int atmci_init_slot(struct atmel_mci *host,
struct mci_slot_pdata *slot_data, unsigned int id,
u32 sdc_reg, u32 sdio_irq)
{
@@ -2206,8 +2209,12 @@
}
}
- if (!gpio_is_valid(slot->detect_pin))
- mmc->caps |= MMC_CAP_NEEDS_POLL;
+ if (!gpio_is_valid(slot->detect_pin)) {
+ if (slot_data->non_removable)
+ mmc->caps |= MMC_CAP_NONREMOVABLE;
+ else
+ mmc->caps |= MMC_CAP_NEEDS_POLL;
+ }
if (gpio_is_valid(slot->wp_pin)) {
if (devm_gpio_request(&host->pdev->dev, slot->wp_pin,
@@ -2265,55 +2272,25 @@
mmc_free_host(slot->mmc);
}
-static bool atmci_filter(struct dma_chan *chan, void *pdata)
+static int atmci_configure_dma(struct atmel_mci *host)
{
- struct mci_platform_data *sl_pdata = pdata;
- struct mci_dma_data *sl;
+ host->dma.chan = dma_request_slave_channel_reason(&host->pdev->dev,
+ "rxtx");
+ if (IS_ERR(host->dma.chan))
+ return PTR_ERR(host->dma.chan);
- if (!sl_pdata)
- return false;
+ dev_info(&host->pdev->dev, "using %s for DMA transfers\n",
+ dma_chan_name(host->dma.chan));
- sl = sl_pdata->dma_slave;
- if (sl && find_slave_dev(sl) == chan->device->dev) {
- chan->private = slave_data_ptr(sl);
- return true;
- } else {
- return false;
- }
-}
+ host->dma_conf.src_addr = host->mapbase + ATMCI_RDR;
+ host->dma_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ host->dma_conf.src_maxburst = 1;
+ host->dma_conf.dst_addr = host->mapbase + ATMCI_TDR;
+ host->dma_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ host->dma_conf.dst_maxburst = 1;
+ host->dma_conf.device_fc = false;
-static bool atmci_configure_dma(struct atmel_mci *host)
-{
- struct mci_platform_data *pdata;
- dma_cap_mask_t mask;
-
- if (host == NULL)
- return false;
-
- pdata = host->pdev->dev.platform_data;
-
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
-
- host->dma.chan = dma_request_slave_channel_compat(mask, atmci_filter, pdata,
- &host->pdev->dev, "rxtx");
- if (!host->dma.chan) {
- dev_warn(&host->pdev->dev, "no DMA channel available\n");
- return false;
- } else {
- dev_info(&host->pdev->dev,
- "using %s for DMA transfers\n",
- dma_chan_name(host->dma.chan));
-
- host->dma_conf.src_addr = host->mapbase + ATMCI_RDR;
- host->dma_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
- host->dma_conf.src_maxburst = 1;
- host->dma_conf.dst_addr = host->mapbase + ATMCI_TDR;
- host->dma_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
- host->dma_conf.dst_maxburst = 1;
- host->dma_conf.device_fc = false;
- return true;
- }
+ return 0;
}
/*
@@ -2321,7 +2298,7 @@
* HSMCI provides DMA support and a new config register but no more supports
* PDC.
*/
-static void __init atmci_get_cap(struct atmel_mci *host)
+static void atmci_get_cap(struct atmel_mci *host)
{
unsigned int version;
@@ -2370,7 +2347,7 @@
}
}
-static int __init atmci_probe(struct platform_device *pdev)
+static int atmci_probe(struct platform_device *pdev)
{
struct mci_platform_data *pdata;
struct atmel_mci *host;
@@ -2417,19 +2394,23 @@
atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
host->bus_hz = clk_get_rate(host->mck);
- clk_disable_unprepare(host->mck);
host->mapbase = regs->start;
tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)host);
ret = request_irq(irq, atmci_interrupt, 0, dev_name(&pdev->dev), host);
- if (ret)
+ if (ret) {
+ clk_disable_unprepare(host->mck);
return ret;
+ }
/* Get MCI capabilities and set operations according to it */
atmci_get_cap(host);
- if (atmci_configure_dma(host)) {
+ ret = atmci_configure_dma(host);
+ if (ret == -EPROBE_DEFER)
+ goto err_dma_probe_defer;
+ if (ret == 0) {
host->prepare_data = &atmci_prepare_data_dma;
host->submit_data = &atmci_submit_data_dma;
host->stop_transfer = &atmci_stop_transfer_dma;
@@ -2449,6 +2430,12 @@
setup_timer(&host->timer, atmci_timeout_timer, (unsigned long)host);
+ pm_runtime_get_noresume(&pdev->dev);
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_set_autosuspend_delay(&pdev->dev, AUTOSUSPEND_DELAY);
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+
/* We need at least one slot to succeed */
nr_slots = 0;
ret = -ENODEV;
@@ -2491,6 +2478,9 @@
"Atmel MCI controller at 0x%08lx irq %d, %u slots\n",
host->mapbase, irq, nr_slots);
+ pm_runtime_mark_last_busy(&host->pdev->dev);
+ pm_runtime_put_autosuspend(&pdev->dev);
+
return 0;
err_dma_alloc:
@@ -2499,18 +2489,26 @@
atmci_cleanup_slot(host->slot[i], i);
}
err_init_slot:
+ clk_disable_unprepare(host->mck);
+
+ pm_runtime_disable(&pdev->dev);
+ pm_runtime_put_noidle(&pdev->dev);
+
del_timer_sync(&host->timer);
- if (host->dma.chan)
+ if (!IS_ERR(host->dma.chan))
dma_release_channel(host->dma.chan);
+err_dma_probe_defer:
free_irq(irq, host);
return ret;
}
-static int __exit atmci_remove(struct platform_device *pdev)
+static int atmci_remove(struct platform_device *pdev)
{
struct atmel_mci *host = platform_get_drvdata(pdev);
unsigned int i;
+ pm_runtime_get_sync(&pdev->dev);
+
if (host->buffer)
dma_free_coherent(&pdev->dev, host->buf_size,
host->buffer, host->buf_phys_addr);
@@ -2520,41 +2518,62 @@
atmci_cleanup_slot(host->slot[i], i);
}
- clk_prepare_enable(host->mck);
atmci_writel(host, ATMCI_IDR, ~0UL);
atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIDIS);
atmci_readl(host, ATMCI_SR);
- clk_disable_unprepare(host->mck);
del_timer_sync(&host->timer);
- if (host->dma.chan)
+ if (!IS_ERR(host->dma.chan))
dma_release_channel(host->dma.chan);
free_irq(platform_get_irq(pdev, 0), host);
+ clk_disable_unprepare(host->mck);
+
+ pm_runtime_disable(&pdev->dev);
+ pm_runtime_put_noidle(&pdev->dev);
+
return 0;
}
+#ifdef CONFIG_PM
+static int atmci_runtime_suspend(struct device *dev)
+{
+ struct atmel_mci *host = dev_get_drvdata(dev);
+
+ clk_disable_unprepare(host->mck);
+
+ pinctrl_pm_select_sleep_state(dev);
+
+ return 0;
+}
+
+static int atmci_runtime_resume(struct device *dev)
+{
+ struct atmel_mci *host = dev_get_drvdata(dev);
+
+ pinctrl_pm_select_default_state(dev);
+
+ return clk_prepare_enable(host->mck);
+}
+#endif
+
+static const struct dev_pm_ops atmci_dev_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+ pm_runtime_force_resume)
+ SET_PM_RUNTIME_PM_OPS(atmci_runtime_suspend, atmci_runtime_resume, NULL)
+};
+
static struct platform_driver atmci_driver = {
- .remove = __exit_p(atmci_remove),
+ .probe = atmci_probe,
+ .remove = atmci_remove,
.driver = {
.name = "atmel_mci",
.of_match_table = of_match_ptr(atmci_dt_ids),
+ .pm = &atmci_dev_pm_ops,
},
};
-
-static int __init atmci_init(void)
-{
- return platform_driver_probe(&atmci_driver, atmci_probe);
-}
-
-static void __exit atmci_exit(void)
-{
- platform_driver_unregister(&atmci_driver);
-}
-
-late_initcall(atmci_init); /* try to load after dma driver when built-in */
-module_exit(atmci_exit);
+module_platform_driver(atmci_driver);
MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver");
MODULE_AUTHOR("Haavard Skinnemoen (Atmel)");
diff --git a/drivers/mmc/host/dw_mmc-exynos.c b/drivers/mmc/host/dw_mmc-exynos.c
index 0fbc53a..509365c 100644
--- a/drivers/mmc/host/dw_mmc-exynos.c
+++ b/drivers/mmc/host/dw_mmc-exynos.c
@@ -25,6 +25,7 @@
#define NUM_PINS(x) (x + 2)
#define SDMMC_CLKSEL 0x09C
+#define SDMMC_CLKSEL64 0x0A8
#define SDMMC_CLKSEL_CCLK_SAMPLE(x) (((x) & 7) << 0)
#define SDMMC_CLKSEL_CCLK_DRIVE(x) (((x) & 7) << 16)
#define SDMMC_CLKSEL_CCLK_DIVIDER(x) (((x) & 7) << 24)
@@ -65,6 +66,8 @@
DW_MCI_TYPE_EXYNOS5250,
DW_MCI_TYPE_EXYNOS5420,
DW_MCI_TYPE_EXYNOS5420_SMU,
+ DW_MCI_TYPE_EXYNOS7,
+ DW_MCI_TYPE_EXYNOS7_SMU,
};
/* Exynos implementation specific driver private data */
@@ -95,6 +98,12 @@
}, {
.compatible = "samsung,exynos5420-dw-mshc-smu",
.ctrl_type = DW_MCI_TYPE_EXYNOS5420_SMU,
+ }, {
+ .compatible = "samsung,exynos7-dw-mshc",
+ .ctrl_type = DW_MCI_TYPE_EXYNOS7,
+ }, {
+ .compatible = "samsung,exynos7-dw-mshc-smu",
+ .ctrl_type = DW_MCI_TYPE_EXYNOS7_SMU,
},
};
@@ -102,7 +111,8 @@
{
struct dw_mci_exynos_priv_data *priv = host->priv;
- if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS5420_SMU) {
+ if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS5420_SMU ||
+ priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU) {
mci_writel(host, MPSBEGIN0, 0);
mci_writel(host, MPSEND0, DWMCI_BLOCK_NUM);
mci_writel(host, MPSCTRL0, DWMCI_MPSCTRL_SECURE_WRITE_BIT |
@@ -153,11 +163,22 @@
static int dw_mci_exynos_resume_noirq(struct device *dev)
{
struct dw_mci *host = dev_get_drvdata(dev);
+ struct dw_mci_exynos_priv_data *priv = host->priv;
u32 clksel;
- clksel = mci_readl(host, CLKSEL);
- if (clksel & SDMMC_CLKSEL_WAKEUP_INT)
- mci_writel(host, CLKSEL, clksel);
+ if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
+ priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+ clksel = mci_readl(host, CLKSEL64);
+ else
+ clksel = mci_readl(host, CLKSEL);
+
+ if (clksel & SDMMC_CLKSEL_WAKEUP_INT) {
+ if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
+ priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+ mci_writel(host, CLKSEL64, clksel);
+ else
+ mci_writel(host, CLKSEL, clksel);
+ }
return 0;
}
@@ -169,6 +190,7 @@
static void dw_mci_exynos_prepare_command(struct dw_mci *host, u32 *cmdr)
{
+ struct dw_mci_exynos_priv_data *priv = host->priv;
/*
* Exynos4412 and Exynos5250 extends the use of CMD register with the
* use of bit 29 (which is reserved on standard MSHC controllers) for
@@ -176,8 +198,14 @@
* HOLD register should be bypassed in case there is no phase shift
* applied on CMD/DATA that is sent to the card.
*/
- if (SDMMC_CLKSEL_GET_DRV_WD3(mci_readl(host, CLKSEL)))
- *cmdr |= SDMMC_CMD_USE_HOLD_REG;
+ if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
+ priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU) {
+ if (SDMMC_CLKSEL_GET_DRV_WD3(mci_readl(host, CLKSEL64)))
+ *cmdr |= SDMMC_CMD_USE_HOLD_REG;
+ } else {
+ if (SDMMC_CLKSEL_GET_DRV_WD3(mci_readl(host, CLKSEL)))
+ *cmdr |= SDMMC_CMD_USE_HOLD_REG;
+ }
}
static void dw_mci_exynos_set_ios(struct dw_mci *host, struct mmc_ios *ios)
@@ -188,12 +216,20 @@
u8 div = priv->ciu_div + 1;
if (ios->timing == MMC_TIMING_MMC_DDR52) {
- mci_writel(host, CLKSEL, priv->ddr_timing);
+ if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
+ priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+ mci_writel(host, CLKSEL64, priv->ddr_timing);
+ else
+ mci_writel(host, CLKSEL, priv->ddr_timing);
/* Should be double rate for DDR mode */
if (ios->bus_width == MMC_BUS_WIDTH_8)
wanted <<= 1;
} else {
- mci_writel(host, CLKSEL, priv->sdr_timing);
+ if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
+ priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+ mci_writel(host, CLKSEL64, priv->sdr_timing);
+ else
+ mci_writel(host, CLKSEL, priv->sdr_timing);
}
/* Don't care if wanted clock is zero */
@@ -265,26 +301,51 @@
static inline u8 dw_mci_exynos_get_clksmpl(struct dw_mci *host)
{
- return SDMMC_CLKSEL_CCLK_SAMPLE(mci_readl(host, CLKSEL));
+ struct dw_mci_exynos_priv_data *priv = host->priv;
+
+ if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
+ priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+ return SDMMC_CLKSEL_CCLK_SAMPLE(mci_readl(host, CLKSEL64));
+ else
+ return SDMMC_CLKSEL_CCLK_SAMPLE(mci_readl(host, CLKSEL));
}
static inline void dw_mci_exynos_set_clksmpl(struct dw_mci *host, u8 sample)
{
u32 clksel;
- clksel = mci_readl(host, CLKSEL);
+ struct dw_mci_exynos_priv_data *priv = host->priv;
+
+ if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
+ priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+ clksel = mci_readl(host, CLKSEL64);
+ else
+ clksel = mci_readl(host, CLKSEL);
clksel = (clksel & ~0x7) | SDMMC_CLKSEL_CCLK_SAMPLE(sample);
- mci_writel(host, CLKSEL, clksel);
+ if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
+ priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+ mci_writel(host, CLKSEL64, clksel);
+ else
+ mci_writel(host, CLKSEL, clksel);
}
static inline u8 dw_mci_exynos_move_next_clksmpl(struct dw_mci *host)
{
+ struct dw_mci_exynos_priv_data *priv = host->priv;
u32 clksel;
u8 sample;
- clksel = mci_readl(host, CLKSEL);
+ if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
+ priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+ clksel = mci_readl(host, CLKSEL64);
+ else
+ clksel = mci_readl(host, CLKSEL);
sample = (clksel + 1) & 0x7;
clksel = (clksel & ~0x7) | sample;
- mci_writel(host, CLKSEL, clksel);
+ if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
+ priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+ mci_writel(host, CLKSEL64, clksel);
+ else
+ mci_writel(host, CLKSEL, clksel);
return sample;
}
@@ -411,6 +472,10 @@
.data = &exynos_drv_data, },
{ .compatible = "samsung,exynos5420-dw-mshc-smu",
.data = &exynos_drv_data, },
+ { .compatible = "samsung,exynos7-dw-mshc",
+ .data = &exynos_drv_data, },
+ { .compatible = "samsung,exynos7-dw-mshc-smu",
+ .data = &exynos_drv_data, },
{},
};
MODULE_DEVICE_TABLE(of, dw_mci_exynos_match);
diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c
index 8b65721..ec6dbcd 100644
--- a/drivers/mmc/host/dw_mmc-pltfm.c
+++ b/drivers/mmc/host/dw_mmc-pltfm.c
@@ -35,6 +35,10 @@
.prepare_command = dw_mci_pltfm_prepare_command,
};
+static const struct dw_mci_drv_data pistachio_drv_data = {
+ .prepare_command = dw_mci_pltfm_prepare_command,
+};
+
int dw_mci_pltfm_register(struct platform_device *pdev,
const struct dw_mci_drv_data *drv_data)
{
@@ -90,6 +94,8 @@
{ .compatible = "snps,dw-mshc", },
{ .compatible = "altr,socfpga-dw-mshc",
.data = &socfpga_drv_data },
+ { .compatible = "img,pistachio-dw-mshc",
+ .data = &pistachio_drv_data },
{},
};
MODULE_DEVICE_TABLE(of, dw_mci_pltfm_match);
diff --git a/drivers/mmc/host/dw_mmc-rockchip.c b/drivers/mmc/host/dw_mmc-rockchip.c
index f0c2cb1..5650ac4 100644
--- a/drivers/mmc/host/dw_mmc-rockchip.c
+++ b/drivers/mmc/host/dw_mmc-rockchip.c
@@ -37,6 +37,9 @@
unsigned int cclkin;
u32 bus_hz;
+ if (ios->clock == 0)
+ return;
+
/*
* cclkin: source clock of mmc controller
* bus_hz: card interface clock generated by CLKGEN
@@ -65,14 +68,24 @@
}
}
+static int dw_mci_rockchip_init(struct dw_mci *host)
+{
+ /* It is slot 8 on Rockchip SoCs */
+ host->sdio_id0 = 8;
+
+ return 0;
+}
+
static const struct dw_mci_drv_data rk2928_drv_data = {
.prepare_command = dw_mci_rockchip_prepare_command,
+ .init = dw_mci_rockchip_init,
};
static const struct dw_mci_drv_data rk3288_drv_data = {
.prepare_command = dw_mci_rockchip_prepare_command,
.set_ios = dw_mci_rk3288_set_ios,
.setup_clock = dw_mci_rk3288_setup_clock,
+ .init = dw_mci_rockchip_init,
};
static const struct of_device_id dw_mci_rockchip_match[] = {
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 69f0cc6..67c0451 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -34,7 +34,6 @@
#include <linux/mmc/dw_mmc.h>
#include <linux/bitops.h>
#include <linux/regulator/consumer.h>
-#include <linux/workqueue.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/mmc/slot-gpio.h>
@@ -62,6 +61,24 @@
SDMMC_IDMAC_INT_FBE | SDMMC_IDMAC_INT_RI | \
SDMMC_IDMAC_INT_TI)
+struct idmac_desc_64addr {
+ u32 des0; /* Control Descriptor */
+
+ u32 des1; /* Reserved */
+
+ u32 des2; /*Buffer sizes */
+#define IDMAC_64ADDR_SET_BUFFER1_SIZE(d, s) \
+ ((d)->des2 = ((d)->des2 & 0x03ffe000) | ((s) & 0x1fff))
+
+ u32 des3; /* Reserved */
+
+ u32 des4; /* Lower 32-bits of Buffer Address Pointer 1*/
+ u32 des5; /* Upper 32-bits of Buffer Address Pointer 1*/
+
+ u32 des6; /* Lower 32-bits of Next Descriptor Address */
+ u32 des7; /* Upper 32-bits of Next Descriptor Address */
+};
+
struct idmac_desc {
u32 des0; /* Control Descriptor */
#define IDMAC_DES0_DIC BIT(1)
@@ -83,6 +100,7 @@
#endif /* CONFIG_MMC_DW_IDMAC */
static bool dw_mci_reset(struct dw_mci *host);
+static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset);
#if defined(CONFIG_DEBUG_FS)
static int dw_mci_req_show(struct seq_file *s, void *v)
@@ -414,31 +432,67 @@
unsigned int sg_len)
{
int i;
- struct idmac_desc *desc = host->sg_cpu;
+ if (host->dma_64bit_address == 1) {
+ struct idmac_desc_64addr *desc = host->sg_cpu;
- for (i = 0; i < sg_len; i++, desc++) {
- unsigned int length = sg_dma_len(&data->sg[i]);
- u32 mem_addr = sg_dma_address(&data->sg[i]);
+ for (i = 0; i < sg_len; i++, desc++) {
+ unsigned int length = sg_dma_len(&data->sg[i]);
+ u64 mem_addr = sg_dma_address(&data->sg[i]);
- /* Set the OWN bit and disable interrupts for this descriptor */
- desc->des0 = IDMAC_DES0_OWN | IDMAC_DES0_DIC | IDMAC_DES0_CH;
+ /*
+ * Set the OWN bit and disable interrupts for this
+ * descriptor
+ */
+ desc->des0 = IDMAC_DES0_OWN | IDMAC_DES0_DIC |
+ IDMAC_DES0_CH;
+ /* Buffer length */
+ IDMAC_64ADDR_SET_BUFFER1_SIZE(desc, length);
- /* Buffer length */
- IDMAC_SET_BUFFER1_SIZE(desc, length);
+ /* Physical address to DMA to/from */
+ desc->des4 = mem_addr & 0xffffffff;
+ desc->des5 = mem_addr >> 32;
+ }
- /* Physical address to DMA to/from */
- desc->des2 = mem_addr;
+ /* Set first descriptor */
+ desc = host->sg_cpu;
+ desc->des0 |= IDMAC_DES0_FD;
+
+ /* Set last descriptor */
+ desc = host->sg_cpu + (i - 1) *
+ sizeof(struct idmac_desc_64addr);
+ desc->des0 &= ~(IDMAC_DES0_CH | IDMAC_DES0_DIC);
+ desc->des0 |= IDMAC_DES0_LD;
+
+ } else {
+ struct idmac_desc *desc = host->sg_cpu;
+
+ for (i = 0; i < sg_len; i++, desc++) {
+ unsigned int length = sg_dma_len(&data->sg[i]);
+ u32 mem_addr = sg_dma_address(&data->sg[i]);
+
+ /*
+ * Set the OWN bit and disable interrupts for this
+ * descriptor
+ */
+ desc->des0 = IDMAC_DES0_OWN | IDMAC_DES0_DIC |
+ IDMAC_DES0_CH;
+ /* Buffer length */
+ IDMAC_SET_BUFFER1_SIZE(desc, length);
+
+ /* Physical address to DMA to/from */
+ desc->des2 = mem_addr;
+ }
+
+ /* Set first descriptor */
+ desc = host->sg_cpu;
+ desc->des0 |= IDMAC_DES0_FD;
+
+ /* Set last descriptor */
+ desc = host->sg_cpu + (i - 1) * sizeof(struct idmac_desc);
+ desc->des0 &= ~(IDMAC_DES0_CH | IDMAC_DES0_DIC);
+ desc->des0 |= IDMAC_DES0_LD;
}
- /* Set first descriptor */
- desc = host->sg_cpu;
- desc->des0 |= IDMAC_DES0_FD;
-
- /* Set last descriptor */
- desc = host->sg_cpu + (i - 1) * sizeof(struct idmac_desc);
- desc->des0 &= ~(IDMAC_DES0_CH | IDMAC_DES0_DIC);
- desc->des0 |= IDMAC_DES0_LD;
-
wmb();
}
@@ -448,6 +502,10 @@
dw_mci_translate_sglist(host, host->data, sg_len);
+ /* Make sure to reset DMA in case we did PIO before this */
+ dw_mci_ctrl_reset(host, SDMMC_CTRL_DMA_RESET);
+ dw_mci_idmac_reset(host);
+
/* Select IDMAC interface */
temp = mci_readl(host, CTRL);
temp |= SDMMC_CTRL_USE_IDMAC;
@@ -466,29 +524,71 @@
static int dw_mci_idmac_init(struct dw_mci *host)
{
- struct idmac_desc *p;
int i;
- /* Number of descriptors in the ring buffer */
- host->ring_size = PAGE_SIZE / sizeof(struct idmac_desc);
+ if (host->dma_64bit_address == 1) {
+ struct idmac_desc_64addr *p;
+ /* Number of descriptors in the ring buffer */
+ host->ring_size = PAGE_SIZE / sizeof(struct idmac_desc_64addr);
- /* Forward link the descriptor list */
- for (i = 0, p = host->sg_cpu; i < host->ring_size - 1; i++, p++)
- p->des3 = host->sg_dma + (sizeof(struct idmac_desc) * (i + 1));
+ /* Forward link the descriptor list */
+ for (i = 0, p = host->sg_cpu; i < host->ring_size - 1;
+ i++, p++) {
+ p->des6 = (host->sg_dma +
+ (sizeof(struct idmac_desc_64addr) *
+ (i + 1))) & 0xffffffff;
- /* Set the last descriptor as the end-of-ring descriptor */
- p->des3 = host->sg_dma;
- p->des0 = IDMAC_DES0_ER;
+ p->des7 = (u64)(host->sg_dma +
+ (sizeof(struct idmac_desc_64addr) *
+ (i + 1))) >> 32;
+ /* Initialize reserved and buffer size fields to "0" */
+ p->des1 = 0;
+ p->des2 = 0;
+ p->des3 = 0;
+ }
+
+ /* Set the last descriptor as the end-of-ring descriptor */
+ p->des6 = host->sg_dma & 0xffffffff;
+ p->des7 = (u64)host->sg_dma >> 32;
+ p->des0 = IDMAC_DES0_ER;
+
+ } else {
+ struct idmac_desc *p;
+ /* Number of descriptors in the ring buffer */
+ host->ring_size = PAGE_SIZE / sizeof(struct idmac_desc);
+
+ /* Forward link the descriptor list */
+ for (i = 0, p = host->sg_cpu; i < host->ring_size - 1; i++, p++)
+ p->des3 = host->sg_dma + (sizeof(struct idmac_desc) *
+ (i + 1));
+
+ /* Set the last descriptor as the end-of-ring descriptor */
+ p->des3 = host->sg_dma;
+ p->des0 = IDMAC_DES0_ER;
+ }
dw_mci_idmac_reset(host);
- /* Mask out interrupts - get Tx & Rx complete only */
- mci_writel(host, IDSTS, IDMAC_INT_CLR);
- mci_writel(host, IDINTEN, SDMMC_IDMAC_INT_NI | SDMMC_IDMAC_INT_RI |
- SDMMC_IDMAC_INT_TI);
+ if (host->dma_64bit_address == 1) {
+ /* Mask out interrupts - get Tx & Rx complete only */
+ mci_writel(host, IDSTS64, IDMAC_INT_CLR);
+ mci_writel(host, IDINTEN64, SDMMC_IDMAC_INT_NI |
+ SDMMC_IDMAC_INT_RI | SDMMC_IDMAC_INT_TI);
- /* Set the descriptor base address */
- mci_writel(host, DBADDR, host->sg_dma);
+ /* Set the descriptor base address */
+ mci_writel(host, DBADDRL, host->sg_dma & 0xffffffff);
+ mci_writel(host, DBADDRU, (u64)host->sg_dma >> 32);
+
+ } else {
+ /* Mask out interrupts - get Tx & Rx complete only */
+ mci_writel(host, IDSTS, IDMAC_INT_CLR);
+ mci_writel(host, IDINTEN, SDMMC_IDMAC_INT_NI |
+ SDMMC_IDMAC_INT_RI | SDMMC_IDMAC_INT_TI);
+
+ /* Set the descriptor base address */
+ mci_writel(host, DBADDR, host->sg_dma);
+ }
+
return 0;
}
@@ -626,6 +726,13 @@
WARN_ON(!(data->flags & MMC_DATA_READ));
+ /*
+ * CDTHRCTL doesn't exist prior to 240A (in fact that register offset is
+ * in the FIFO region, so we really shouldn't access it).
+ */
+ if (host->verid < DW_MMC_240A)
+ return;
+
if (host->timing != MMC_TIMING_MMC_HS200 &&
host->timing != MMC_TIMING_UHS_SDR104)
goto disable;
@@ -819,7 +926,7 @@
/* enable clock; only low power if no SDIO */
clk_en_a = SDMMC_CLKEN_ENABLE << slot->id;
- if (!(mci_readl(host, INTMASK) & SDMMC_INT_SDIO(slot->id)))
+ if (!(mci_readl(host, INTMASK) & SDMMC_INT_SDIO(slot->sdio_id)))
clk_en_a |= SDMMC_CLKEN_LOW_PWR << slot->id;
mci_writel(host, CLKENA, clk_en_a);
@@ -1075,7 +1182,7 @@
ret = regulator_set_voltage(mmc->supply.vqmmc, min_uv, max_uv);
if (ret) {
- dev_err(&mmc->class_dev,
+ dev_dbg(&mmc->class_dev,
"Regulator set error %d: %d - %d\n",
ret, min_uv, max_uv);
return ret;
@@ -1180,10 +1287,10 @@
dw_mci_disable_low_power(slot);
mci_writel(host, INTMASK,
- (int_mask | SDMMC_INT_SDIO(slot->id)));
+ (int_mask | SDMMC_INT_SDIO(slot->sdio_id)));
} else {
mci_writel(host, INTMASK,
- (int_mask & ~SDMMC_INT_SDIO(slot->id)));
+ (int_mask & ~SDMMC_INT_SDIO(slot->sdio_id)));
}
}
@@ -1954,6 +2061,23 @@
tasklet_schedule(&host->tasklet);
}
+static void dw_mci_handle_cd(struct dw_mci *host)
+{
+ int i;
+
+ for (i = 0; i < host->num_slots; i++) {
+ struct dw_mci_slot *slot = host->slot[i];
+
+ if (!slot)
+ continue;
+
+ if (slot->mmc->ops->card_event)
+ slot->mmc->ops->card_event(slot->mmc);
+ mmc_detect_change(slot->mmc,
+ msecs_to_jiffies(host->pdata->detect_delay_ms));
+ }
+}
+
static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
{
struct dw_mci *host = dev_id;
@@ -2029,14 +2153,15 @@
if (pending & SDMMC_INT_CD) {
mci_writel(host, RINTSTS, SDMMC_INT_CD);
- queue_work(host->card_workqueue, &host->card_work);
+ dw_mci_handle_cd(host);
}
/* Handle SDIO Interrupts */
for (i = 0; i < host->num_slots; i++) {
struct dw_mci_slot *slot = host->slot[i];
- if (pending & SDMMC_INT_SDIO(i)) {
- mci_writel(host, RINTSTS, SDMMC_INT_SDIO(i));
+ if (pending & SDMMC_INT_SDIO(slot->sdio_id)) {
+ mci_writel(host, RINTSTS,
+ SDMMC_INT_SDIO(slot->sdio_id));
mmc_signal_sdio_irq(slot->mmc);
}
}
@@ -2045,99 +2170,28 @@
#ifdef CONFIG_MMC_DW_IDMAC
/* Handle DMA interrupts */
- pending = mci_readl(host, IDSTS);
- if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
- mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI);
- mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
- host->dma_ops->complete(host);
+ if (host->dma_64bit_address == 1) {
+ pending = mci_readl(host, IDSTS64);
+ if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
+ mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_TI |
+ SDMMC_IDMAC_INT_RI);
+ mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_NI);
+ host->dma_ops->complete(host);
+ }
+ } else {
+ pending = mci_readl(host, IDSTS);
+ if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
+ mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI |
+ SDMMC_IDMAC_INT_RI);
+ mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
+ host->dma_ops->complete(host);
+ }
}
#endif
return IRQ_HANDLED;
}
-static void dw_mci_work_routine_card(struct work_struct *work)
-{
- struct dw_mci *host = container_of(work, struct dw_mci, card_work);
- int i;
-
- for (i = 0; i < host->num_slots; i++) {
- struct dw_mci_slot *slot = host->slot[i];
- struct mmc_host *mmc = slot->mmc;
- struct mmc_request *mrq;
- int present;
-
- present = dw_mci_get_cd(mmc);
- while (present != slot->last_detect_state) {
- dev_dbg(&slot->mmc->class_dev, "card %s\n",
- present ? "inserted" : "removed");
-
- spin_lock_bh(&host->lock);
-
- /* Card change detected */
- slot->last_detect_state = present;
-
- /* Clean up queue if present */
- mrq = slot->mrq;
- if (mrq) {
- if (mrq == host->mrq) {
- host->data = NULL;
- host->cmd = NULL;
-
- switch (host->state) {
- case STATE_IDLE:
- case STATE_WAITING_CMD11_DONE:
- break;
- case STATE_SENDING_CMD11:
- case STATE_SENDING_CMD:
- mrq->cmd->error = -ENOMEDIUM;
- if (!mrq->data)
- break;
- /* fall through */
- case STATE_SENDING_DATA:
- mrq->data->error = -ENOMEDIUM;
- dw_mci_stop_dma(host);
- break;
- case STATE_DATA_BUSY:
- case STATE_DATA_ERROR:
- if (mrq->data->error == -EINPROGRESS)
- mrq->data->error = -ENOMEDIUM;
- /* fall through */
- case STATE_SENDING_STOP:
- if (mrq->stop)
- mrq->stop->error = -ENOMEDIUM;
- break;
- }
-
- dw_mci_request_end(host, mrq);
- } else {
- list_del(&slot->queue_node);
- mrq->cmd->error = -ENOMEDIUM;
- if (mrq->data)
- mrq->data->error = -ENOMEDIUM;
- if (mrq->stop)
- mrq->stop->error = -ENOMEDIUM;
-
- spin_unlock(&host->lock);
- mmc_request_done(slot->mmc, mrq);
- spin_lock(&host->lock);
- }
- }
-
- /* Power down slot */
- if (present == 0)
- dw_mci_reset(host);
-
- spin_unlock_bh(&host->lock);
-
- present = dw_mci_get_cd(mmc);
- }
-
- mmc_detect_change(slot->mmc,
- msecs_to_jiffies(host->pdata->detect_delay_ms));
- }
-}
-
#ifdef CONFIG_OF
/* given a slot id, find out the device node representing that slot */
static struct device_node *dw_mci_of_find_slot_node(struct device *dev, u8 slot)
@@ -2206,6 +2260,7 @@
slot = mmc_priv(mmc);
slot->id = id;
+ slot->sdio_id = host->sdio_id0 + id;
slot->mmc = mmc;
slot->host = host;
host->slot[id] = slot;
@@ -2289,9 +2344,6 @@
dw_mci_init_debugfs(slot);
#endif
- /* Card initially undetected */
- slot->last_detect_state = 0;
-
return 0;
err_host_allocated:
@@ -2309,6 +2361,22 @@
static void dw_mci_init_dma(struct dw_mci *host)
{
+ int addr_config;
+ /* Check ADDR_CONFIG bit in HCON to find IDMAC address bus width */
+ addr_config = (mci_readl(host, HCON) >> 27) & 0x01;
+
+ if (addr_config == 1) {
+ /* host supports IDMAC in 64-bit address mode */
+ host->dma_64bit_address = 1;
+ dev_info(host->dev, "IDMAC supports 64-bit address mode.\n");
+ if (!dma_set_mask(host->dev, DMA_BIT_MASK(64)))
+ dma_set_coherent_mask(host->dev, DMA_BIT_MASK(64));
+ } else {
+ /* host supports IDMAC in 32-bit address mode */
+ host->dma_64bit_address = 0;
+ dev_info(host->dev, "IDMAC supports 32-bit address mode.\n");
+ }
+
/* Alloc memory for sg translation */
host->sg_cpu = dmam_alloc_coherent(host->dev, PAGE_SIZE,
&host->sg_dma, GFP_KERNEL);
@@ -2672,17 +2740,10 @@
host->data_offset = DATA_240A_OFFSET;
tasklet_init(&host->tasklet, dw_mci_tasklet_func, (unsigned long)host);
- host->card_workqueue = alloc_workqueue("dw-mci-card",
- WQ_MEM_RECLAIM, 1);
- if (!host->card_workqueue) {
- ret = -ENOMEM;
- goto err_dmaunmap;
- }
- INIT_WORK(&host->card_work, dw_mci_work_routine_card);
ret = devm_request_irq(host->dev, host->irq, dw_mci_interrupt,
host->irq_flags, "dw-mci", host);
if (ret)
- goto err_workqueue;
+ goto err_dmaunmap;
if (host->pdata->num_slots)
host->num_slots = host->pdata->num_slots;
@@ -2718,7 +2779,7 @@
} else {
dev_dbg(host->dev, "attempted to initialize %d slots, "
"but failed on all\n", host->num_slots);
- goto err_workqueue;
+ goto err_dmaunmap;
}
if (host->quirks & DW_MCI_QUIRK_IDMAC_DTO)
@@ -2726,9 +2787,6 @@
return 0;
-err_workqueue:
- destroy_workqueue(host->card_workqueue);
-
err_dmaunmap:
if (host->use_dma && host->dma_ops->exit)
host->dma_ops->exit(host);
@@ -2762,8 +2820,6 @@
mci_writel(host, CLKENA, 0);
mci_writel(host, CLKSRC, 0);
- destroy_workqueue(host->card_workqueue);
-
if (host->use_dma && host->dma_ops->exit)
host->dma_ops->exit(host);
diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h
index 01b99e8..0d0f7a2 100644
--- a/drivers/mmc/host/dw_mmc.h
+++ b/drivers/mmc/host/dw_mmc.h
@@ -55,6 +55,17 @@
#define SDMMC_BUFADDR 0x098
#define SDMMC_CDTHRCTL 0x100
#define SDMMC_DATA(x) (x)
+/*
+* Registers to support idmac 64-bit address mode
+*/
+#define SDMMC_DBADDRL 0x088
+#define SDMMC_DBADDRU 0x08c
+#define SDMMC_IDSTS64 0x090
+#define SDMMC_IDINTEN64 0x094
+#define SDMMC_DSCADDRL 0x098
+#define SDMMC_DSCADDRU 0x09c
+#define SDMMC_BUFADDRL 0x0A0
+#define SDMMC_BUFADDRU 0x0A4
/*
* Data offset is difference according to Version
@@ -214,7 +225,7 @@
* with CONFIG_MMC_CLKGATE.
* @flags: Random state bits associated with the slot.
* @id: Number of this slot.
- * @last_detect_state: Most recently observed card detect state.
+ * @sdio_id: Number of this slot in the SDIO interrupt registers.
*/
struct dw_mci_slot {
struct mmc_host *mmc;
@@ -234,7 +245,7 @@
#define DW_MMC_CARD_PRESENT 0
#define DW_MMC_CARD_NEED_INIT 1
int id;
- int last_detect_state;
+ int sdio_id;
};
struct dw_mci_tuning_data {
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 43af791..53bf7a4 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -736,8 +736,15 @@
chan = host->dma_tx_channel;
dmaengine_terminate_all(chan);
+ if (host->dma_desc_current == next->dma_desc)
+ host->dma_desc_current = NULL;
+
+ if (host->dma_current == next->dma_chan)
+ host->dma_current = NULL;
+
next->dma_desc = NULL;
next->dma_chan = NULL;
+ data->host_cookie = 0;
}
}
diff --git a/drivers/mmc/host/msm_sdcc.c b/drivers/mmc/host/msm_sdcc.c
index 9405ecd..90c60fd 100644
--- a/drivers/mmc/host/msm_sdcc.c
+++ b/drivers/mmc/host/msm_sdcc.c
@@ -1360,7 +1360,7 @@
if (ret)
goto cmd_irq_free;
- mmc_set_drvdata(pdev, mmc);
+ platform_set_drvdata(pdev, mmc);
mmc_add_host(mmc);
pr_info("%s: Qualcomm MSM SDCC at 0x%016llx irq %d,%d dma %d\n",
@@ -1419,7 +1419,7 @@
static int
msmsdcc_suspend(struct platform_device *dev, pm_message_t state)
{
- struct mmc_host *mmc = mmc_get_drvdata(dev);
+ struct mmc_host *mmc = platform_get_drvdata(dev);
if (mmc) {
struct msmsdcc_host *host = mmc_priv(mmc);
@@ -1437,7 +1437,7 @@
static int
msmsdcc_resume(struct platform_device *dev)
{
- struct mmc_host *mmc = mmc_get_drvdata(dev);
+ struct mmc_host *mmc = platform_get_drvdata(dev);
if (mmc) {
struct msmsdcc_host *host = mmc_priv(mmc);
diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c
index 6b4c5ad3..4f8618f 100644
--- a/drivers/mmc/host/mvsdio.c
+++ b/drivers/mmc/host/mvsdio.c
@@ -111,10 +111,15 @@
mvsd_write(MVSD_BLK_COUNT, data->blocks);
mvsd_write(MVSD_BLK_SIZE, data->blksz);
- if (nodma || (data->blksz | data->sg->offset) & 3) {
+ if (nodma || (data->blksz | data->sg->offset) & 3 ||
+ ((!(data->flags & MMC_DATA_READ) && data->sg->offset & 0x3f))) {
/*
* We cannot do DMA on a buffer which offset or size
* is not aligned on a 4-byte boundary.
+ *
+ * It also appears the host to card DMA can corrupt
+ * data when the buffer is not aligned on a 64 byte
+ * boundary.
*/
host->pio_size = data->blocks * data->blksz;
host->pio_ptr = sg_virt(data->sg);
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index ad11142..5316d9b 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -373,13 +373,9 @@
del_timer(&host->watchdog);
stat = mxcmci_readl(host, MMC_REG_STATUS);
- mxcmci_writel(host, stat & ~STATUS_DATA_TRANS_DONE, MMC_REG_STATUS);
dev_dbg(mmc_dev(host->mmc), "%s: 0x%08x\n", __func__, stat);
- if (stat & STATUS_READ_OP_DONE)
- mxcmci_writel(host, STATUS_READ_OP_DONE, MMC_REG_STATUS);
-
mxcmci_data_done(host, stat);
}
@@ -743,10 +739,8 @@
sdio_irq = (stat & STATUS_SDIO_INT_ACTIVE) && host->use_sdio;
spin_unlock_irqrestore(&host->lock, flags);
- if (mxcmci_use_dma(host) &&
- (stat & (STATUS_READ_OP_DONE | STATUS_WRITE_OP_DONE)))
- mxcmci_writel(host, STATUS_READ_OP_DONE | STATUS_WRITE_OP_DONE,
- MMC_REG_STATUS);
+ if (mxcmci_use_dma(host) && (stat & (STATUS_WRITE_OP_DONE)))
+ mxcmci_writel(host, STATUS_WRITE_OP_DONE, MMC_REG_STATUS);
if (sdio_irq) {
mxcmci_writel(host, STATUS_SDIO_INT_ACTIVE, MMC_REG_STATUS);
@@ -756,8 +750,7 @@
if (stat & STATUS_END_CMD_RESP)
mxcmci_cmd_done(host, stat);
- if (mxcmci_use_dma(host) &&
- (stat & (STATUS_DATA_TRANS_DONE | STATUS_WRITE_OP_DONE))) {
+ if (mxcmci_use_dma(host) && (stat & STATUS_WRITE_OP_DONE)) {
del_timer(&host->watchdog);
mxcmci_data_done(host, stat);
}
@@ -1084,12 +1077,14 @@
dat3_card_detect = true;
ret = mmc_regulator_get_supply(mmc);
- if (ret) {
- if (pdata && ret != -EPROBE_DEFER)
- mmc->ocr_avail = pdata->ocr_avail ? :
- MMC_VDD_32_33 | MMC_VDD_33_34;
+ if (ret == -EPROBE_DEFER)
+ goto out_free;
+
+ if (!mmc->ocr_avail) {
+ if (pdata && pdata->ocr_avail)
+ mmc->ocr_avail = pdata->ocr_avail;
else
- goto out_free;
+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
}
if (dat3_card_detect)
diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index cd74e51..60c4ca9 100644
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -581,10 +581,9 @@
struct regulator *reg_vmmc;
struct mxs_ssp *ssp;
- iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq_err = platform_get_irq(pdev, 0);
- if (!iores || irq_err < 0)
- return -EINVAL;
+ if (irq_err < 0)
+ return irq_err;
mmc = mmc_alloc_host(sizeof(struct mxs_mmc_host), &pdev->dev);
if (!mmc)
@@ -593,6 +592,7 @@
host = mmc_priv(mmc);
ssp = &host->ssp;
ssp->dev = &pdev->dev;
+ iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
ssp->base = devm_ioremap_resource(&pdev->dev, iores);
if (IS_ERR(ssp->base)) {
ret = PTR_ERR(ssp->base);
@@ -619,7 +619,9 @@
ret = PTR_ERR(ssp->clk);
goto out_mmc_free;
}
- clk_prepare_enable(ssp->clk);
+ ret = clk_prepare_enable(ssp->clk);
+ if (ret)
+ goto out_mmc_free;
ret = mxs_mmc_reset(host);
if (ret) {
@@ -660,7 +662,7 @@
platform_set_drvdata(pdev, mmc);
ret = devm_request_irq(&pdev->dev, irq_err, mxs_mmc_irq_handler, 0,
- DRIVER_NAME, host);
+ dev_name(&pdev->dev), host);
if (ret)
goto out_free_dma;
@@ -702,7 +704,7 @@
return 0;
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int mxs_mmc_suspend(struct device *dev)
{
struct mmc_host *mmc = dev_get_drvdata(dev);
@@ -719,25 +721,19 @@
struct mxs_mmc_host *host = mmc_priv(mmc);
struct mxs_ssp *ssp = &host->ssp;
- clk_prepare_enable(ssp->clk);
- return 0;
+ return clk_prepare_enable(ssp->clk);
}
-
-static const struct dev_pm_ops mxs_mmc_pm_ops = {
- .suspend = mxs_mmc_suspend,
- .resume = mxs_mmc_resume,
-};
#endif
+static SIMPLE_DEV_PM_OPS(mxs_mmc_pm_ops, mxs_mmc_suspend, mxs_mmc_resume);
+
static struct platform_driver mxs_mmc_driver = {
.probe = mxs_mmc_probe,
.remove = mxs_mmc_remove,
.id_table = mxs_ssp_ids,
.driver = {
.name = DRIVER_NAME,
-#ifdef CONFIG_PM
.pm = &mxs_mmc_pm_ops,
-#endif
.of_match_table = mxs_mmc_dt_ids,
},
};
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index df27bb4..7c71dcd 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -42,7 +42,7 @@
#include <linux/regulator/consumer.h>
#include <linux/pinctrl/consumer.h>
#include <linux/pm_runtime.h>
-#include <linux/platform_data/mmc-omap.h>
+#include <linux/platform_data/hsmmc-omap.h>
/* OMAP HSMMC Host Controller Registers */
#define OMAP_HSMMC_SYSSTATUS 0x0014
@@ -155,7 +155,7 @@
* omap.c controller driver. Luckily this is not currently done on any known
* omap_hsmmc.c device.
*/
-#define mmc_slot(host) (host->pdata->slots[host->slot_id])
+#define mmc_pdata(host) host->pdata
/*
* MMC Host controller read/write API's
@@ -207,7 +207,6 @@
int use_dma, dma_ch;
struct dma_chan *tx_chan;
struct dma_chan *rx_chan;
- int slot_id;
int response_busy;
int context_loss;
int protect_card;
@@ -220,7 +219,26 @@
#define HSMMC_SDIO_IRQ_ENABLED (1 << 1) /* SDIO irq enabled */
#define HSMMC_WAKE_IRQ_ENABLED (1 << 2)
struct omap_hsmmc_next next_data;
- struct omap_mmc_platform_data *pdata;
+ struct omap_hsmmc_platform_data *pdata;
+
+ /* To handle board related suspend/resume functionality for MMC */
+ int (*suspend)(struct device *dev);
+ int (*resume)(struct device *dev);
+
+ /* return MMC cover switch state, can be NULL if not supported.
+ *
+ * possible return values:
+ * 0 - closed
+ * 1 - open
+ */
+ int (*get_cover_state)(struct device *dev);
+
+ /* Card detection IRQs */
+ int card_detect_irq;
+
+ int (*card_detect)(struct device *dev);
+ int (*get_ro)(struct device *dev);
+
};
struct omap_mmc_of_data {
@@ -230,50 +248,48 @@
static void omap_hsmmc_start_dma_transfer(struct omap_hsmmc_host *host);
-static int omap_hsmmc_card_detect(struct device *dev, int slot)
+static int omap_hsmmc_card_detect(struct device *dev)
{
struct omap_hsmmc_host *host = dev_get_drvdata(dev);
- struct omap_mmc_platform_data *mmc = host->pdata;
+ struct omap_hsmmc_platform_data *mmc = host->pdata;
/* NOTE: assumes card detect signal is active-low */
- return !gpio_get_value_cansleep(mmc->slots[0].switch_pin);
+ return !gpio_get_value_cansleep(mmc->switch_pin);
}
-static int omap_hsmmc_get_wp(struct device *dev, int slot)
+static int omap_hsmmc_get_wp(struct device *dev)
{
struct omap_hsmmc_host *host = dev_get_drvdata(dev);
- struct omap_mmc_platform_data *mmc = host->pdata;
+ struct omap_hsmmc_platform_data *mmc = host->pdata;
/* NOTE: assumes write protect signal is active-high */
- return gpio_get_value_cansleep(mmc->slots[0].gpio_wp);
+ return gpio_get_value_cansleep(mmc->gpio_wp);
}
-static int omap_hsmmc_get_cover_state(struct device *dev, int slot)
+static int omap_hsmmc_get_cover_state(struct device *dev)
{
struct omap_hsmmc_host *host = dev_get_drvdata(dev);
- struct omap_mmc_platform_data *mmc = host->pdata;
+ struct omap_hsmmc_platform_data *mmc = host->pdata;
/* NOTE: assumes card detect signal is active-low */
- return !gpio_get_value_cansleep(mmc->slots[0].switch_pin);
+ return !gpio_get_value_cansleep(mmc->switch_pin);
}
#ifdef CONFIG_PM
-static int omap_hsmmc_suspend_cdirq(struct device *dev, int slot)
+static int omap_hsmmc_suspend_cdirq(struct device *dev)
{
struct omap_hsmmc_host *host = dev_get_drvdata(dev);
- struct omap_mmc_platform_data *mmc = host->pdata;
- disable_irq(mmc->slots[0].card_detect_irq);
+ disable_irq(host->card_detect_irq);
return 0;
}
-static int omap_hsmmc_resume_cdirq(struct device *dev, int slot)
+static int omap_hsmmc_resume_cdirq(struct device *dev)
{
struct omap_hsmmc_host *host = dev_get_drvdata(dev);
- struct omap_mmc_platform_data *mmc = host->pdata;
- enable_irq(mmc->slots[0].card_detect_irq);
+ enable_irq(host->card_detect_irq);
return 0;
}
@@ -286,8 +302,7 @@
#ifdef CONFIG_REGULATOR
-static int omap_hsmmc_set_power(struct device *dev, int slot, int power_on,
- int vdd)
+static int omap_hsmmc_set_power(struct device *dev, int power_on, int vdd)
{
struct omap_hsmmc_host *host =
platform_get_drvdata(to_platform_device(dev));
@@ -300,8 +315,8 @@
if (!host->vcc)
return 0;
- if (mmc_slot(host).before_set_reg)
- mmc_slot(host).before_set_reg(dev, slot, power_on, vdd);
+ if (mmc_pdata(host)->before_set_reg)
+ mmc_pdata(host)->before_set_reg(dev, power_on, vdd);
if (host->pbias) {
if (host->pbias_enabled == 1) {
@@ -363,8 +378,8 @@
}
}
- if (mmc_slot(host).after_set_reg)
- mmc_slot(host).after_set_reg(dev, slot, power_on, vdd);
+ if (mmc_pdata(host)->after_set_reg)
+ mmc_pdata(host)->after_set_reg(dev, power_on, vdd);
error_set_power:
return ret;
@@ -383,18 +398,18 @@
} else {
host->vcc = reg;
ocr_value = mmc_regulator_get_ocrmask(reg);
- if (!mmc_slot(host).ocr_mask) {
- mmc_slot(host).ocr_mask = ocr_value;
+ if (!mmc_pdata(host)->ocr_mask) {
+ mmc_pdata(host)->ocr_mask = ocr_value;
} else {
- if (!(mmc_slot(host).ocr_mask & ocr_value)) {
+ if (!(mmc_pdata(host)->ocr_mask & ocr_value)) {
dev_err(host->dev, "ocrmask %x is not supported\n",
- mmc_slot(host).ocr_mask);
- mmc_slot(host).ocr_mask = 0;
+ mmc_pdata(host)->ocr_mask);
+ mmc_pdata(host)->ocr_mask = 0;
return -EINVAL;
}
}
}
- mmc_slot(host).set_power = omap_hsmmc_set_power;
+ mmc_pdata(host)->set_power = omap_hsmmc_set_power;
/* Allow an aux regulator */
reg = devm_regulator_get_optional(host->dev, "vmmc_aux");
@@ -404,7 +419,7 @@
host->pbias = IS_ERR(reg) ? NULL : reg;
/* For eMMC do not power off when not in sleep state */
- if (mmc_slot(host).no_regulator_off_init)
+ if (mmc_pdata(host)->no_regulator_off_init)
return 0;
/*
* To disable boot_on regulator, enable regulator
@@ -412,10 +427,10 @@
*/
if ((host->vcc && regulator_is_enabled(host->vcc) > 0) ||
(host->vcc_aux && regulator_is_enabled(host->vcc_aux))) {
- int vdd = ffs(mmc_slot(host).ocr_mask) - 1;
+ int vdd = ffs(mmc_pdata(host)->ocr_mask) - 1;
- mmc_slot(host).set_power(host->dev, host->slot_id, 1, vdd);
- mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0);
+ mmc_pdata(host)->set_power(host->dev, 1, vdd);
+ mmc_pdata(host)->set_power(host->dev, 0, 0);
}
return 0;
@@ -423,7 +438,7 @@
static void omap_hsmmc_reg_put(struct omap_hsmmc_host *host)
{
- mmc_slot(host).set_power = NULL;
+ mmc_pdata(host)->set_power = NULL;
}
static inline int omap_hsmmc_have_reg(void)
@@ -449,55 +464,59 @@
#endif
-static int omap_hsmmc_gpio_init(struct omap_mmc_platform_data *pdata)
+static int omap_hsmmc_gpio_init(struct omap_hsmmc_host *host,
+ struct omap_hsmmc_platform_data *pdata)
{
int ret;
- if (gpio_is_valid(pdata->slots[0].switch_pin)) {
- if (pdata->slots[0].cover)
- pdata->slots[0].get_cover_state =
- omap_hsmmc_get_cover_state;
+ if (gpio_is_valid(pdata->switch_pin)) {
+ if (pdata->cover)
+ host->get_cover_state =
+ omap_hsmmc_get_cover_state;
else
- pdata->slots[0].card_detect = omap_hsmmc_card_detect;
- pdata->slots[0].card_detect_irq =
- gpio_to_irq(pdata->slots[0].switch_pin);
- ret = gpio_request(pdata->slots[0].switch_pin, "mmc_cd");
+ host->card_detect = omap_hsmmc_card_detect;
+ host->card_detect_irq =
+ gpio_to_irq(pdata->switch_pin);
+ ret = gpio_request(pdata->switch_pin, "mmc_cd");
if (ret)
return ret;
- ret = gpio_direction_input(pdata->slots[0].switch_pin);
+ ret = gpio_direction_input(pdata->switch_pin);
if (ret)
goto err_free_sp;
- } else
- pdata->slots[0].switch_pin = -EINVAL;
+ } else {
+ pdata->switch_pin = -EINVAL;
+ }
- if (gpio_is_valid(pdata->slots[0].gpio_wp)) {
- pdata->slots[0].get_ro = omap_hsmmc_get_wp;
- ret = gpio_request(pdata->slots[0].gpio_wp, "mmc_wp");
+ if (gpio_is_valid(pdata->gpio_wp)) {
+ host->get_ro = omap_hsmmc_get_wp;
+ ret = gpio_request(pdata->gpio_wp, "mmc_wp");
if (ret)
goto err_free_cd;
- ret = gpio_direction_input(pdata->slots[0].gpio_wp);
+ ret = gpio_direction_input(pdata->gpio_wp);
if (ret)
goto err_free_wp;
- } else
- pdata->slots[0].gpio_wp = -EINVAL;
+ } else {
+ pdata->gpio_wp = -EINVAL;
+ }
return 0;
err_free_wp:
- gpio_free(pdata->slots[0].gpio_wp);
+ gpio_free(pdata->gpio_wp);
err_free_cd:
- if (gpio_is_valid(pdata->slots[0].switch_pin))
+ if (gpio_is_valid(pdata->switch_pin))
err_free_sp:
- gpio_free(pdata->slots[0].switch_pin);
+ gpio_free(pdata->switch_pin);
return ret;
}
-static void omap_hsmmc_gpio_free(struct omap_mmc_platform_data *pdata)
+static void omap_hsmmc_gpio_free(struct omap_hsmmc_host *host,
+ struct omap_hsmmc_platform_data *pdata)
{
- if (gpio_is_valid(pdata->slots[0].gpio_wp))
- gpio_free(pdata->slots[0].gpio_wp);
- if (gpio_is_valid(pdata->slots[0].switch_pin))
- gpio_free(pdata->slots[0].switch_pin);
+ if (gpio_is_valid(pdata->gpio_wp))
+ gpio_free(pdata->gpio_wp);
+ if (gpio_is_valid(pdata->switch_pin))
+ gpio_free(pdata->switch_pin);
}
/*
@@ -607,8 +626,9 @@
* in capabilities register
* - MMC/SD clock coming out of controller > 25MHz
*/
- if ((mmc_slot(host).features & HSMMC_HAS_HSPE_SUPPORT) &&
+ if ((mmc_pdata(host)->features & HSMMC_HAS_HSPE_SUPPORT) &&
(ios->timing != MMC_TIMING_MMC_DDR52) &&
+ (ios->timing != MMC_TIMING_UHS_DDR50) &&
((OMAP_HSMMC_READ(host->base, CAPA) & HSS) == HSS)) {
regval = OMAP_HSMMC_READ(host->base, HCTL);
if (clkdiv && (clk_get_rate(host->fclk)/clkdiv) > 25000000)
@@ -628,7 +648,8 @@
u32 con;
con = OMAP_HSMMC_READ(host->base, CON);
- if (ios->timing == MMC_TIMING_MMC_DDR52)
+ if (ios->timing == MMC_TIMING_MMC_DDR52 ||
+ ios->timing == MMC_TIMING_UHS_DDR50)
con |= DDR; /* configure in DDR mode */
else
con &= ~DDR;
@@ -791,8 +812,8 @@
{
int r = 1;
- if (mmc_slot(host).get_cover_state)
- r = mmc_slot(host).get_cover_state(host->dev, host->slot_id);
+ if (host->get_cover_state)
+ r = host->get_cover_state(host->dev);
return r;
}
@@ -816,7 +837,7 @@
struct mmc_host *mmc = container_of(dev, struct mmc_host, class_dev);
struct omap_hsmmc_host *host = mmc_priv(mmc);
- return sprintf(buf, "%s\n", mmc_slot(host).name);
+ return sprintf(buf, "%s\n", mmc_pdata(host)->name);
}
static DEVICE_ATTR(slot_name, S_IRUGO, omap_hsmmc_show_slot_name, NULL);
@@ -1061,7 +1082,7 @@
* OMAP4 ES2 and greater has an updated reset logic.
* Monitor a 0->1 transition first
*/
- if (mmc_slot(host).features & HSMMC_HAS_UPDATED_RESET) {
+ if (mmc_pdata(host)->features & HSMMC_HAS_UPDATED_RESET) {
while ((!(OMAP_HSMMC_READ(host->base, SYSCTL) & bit))
&& (i++ < limit))
udelay(1);
@@ -1210,12 +1231,11 @@
clk_disable_unprepare(host->dbclk);
/* Turn the power off */
- ret = mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0);
+ ret = mmc_pdata(host)->set_power(host->dev, 0, 0);
/* Turn the power ON with given VDD 1.8 or 3.0v */
if (!ret)
- ret = mmc_slot(host).set_power(host->dev, host->slot_id, 1,
- vdd);
+ ret = mmc_pdata(host)->set_power(host->dev, 1, vdd);
pm_runtime_get_sync(host->dev);
if (host->dbclk)
clk_prepare_enable(host->dbclk);
@@ -1259,11 +1279,11 @@
/* Protect the card while the cover is open */
static void omap_hsmmc_protect_card(struct omap_hsmmc_host *host)
{
- if (!mmc_slot(host).get_cover_state)
+ if (!host->get_cover_state)
return;
host->reqs_blocked = 0;
- if (mmc_slot(host).get_cover_state(host->dev, host->slot_id)) {
+ if (host->get_cover_state(host->dev)) {
if (host->protect_card) {
dev_info(host->dev, "%s: cover is closed, "
"card is now accessible\n",
@@ -1286,13 +1306,12 @@
static irqreturn_t omap_hsmmc_detect(int irq, void *dev_id)
{
struct omap_hsmmc_host *host = dev_id;
- struct omap_mmc_slot_data *slot = &mmc_slot(host);
int carddetect;
sysfs_notify(&host->mmc->class_dev.kobj, NULL, "cover_switch");
- if (slot->card_detect)
- carddetect = slot->card_detect(host->dev, host->slot_id);
+ if (host->card_detect)
+ carddetect = host->card_detect(host->dev);
else {
omap_hsmmc_protect_card(host);
carddetect = -ENOSYS;
@@ -1618,12 +1637,10 @@
if (ios->power_mode != host->power_mode) {
switch (ios->power_mode) {
case MMC_POWER_OFF:
- mmc_slot(host).set_power(host->dev, host->slot_id,
- 0, 0);
+ mmc_pdata(host)->set_power(host->dev, 0, 0);
break;
case MMC_POWER_UP:
- mmc_slot(host).set_power(host->dev, host->slot_id,
- 1, ios->vdd);
+ mmc_pdata(host)->set_power(host->dev, 1, ios->vdd);
break;
case MMC_POWER_ON:
do_send_init_stream = 1;
@@ -1668,26 +1685,26 @@
{
struct omap_hsmmc_host *host = mmc_priv(mmc);
- if (!mmc_slot(host).card_detect)
+ if (!host->card_detect)
return -ENOSYS;
- return mmc_slot(host).card_detect(host->dev, host->slot_id);
+ return host->card_detect(host->dev);
}
static int omap_hsmmc_get_ro(struct mmc_host *mmc)
{
struct omap_hsmmc_host *host = mmc_priv(mmc);
- if (!mmc_slot(host).get_ro)
+ if (!host->get_ro)
return -ENOSYS;
- return mmc_slot(host).get_ro(host->dev, 0);
+ return host->get_ro(host->dev);
}
static void omap_hsmmc_init_card(struct mmc_host *mmc, struct mmc_card *card)
{
struct omap_hsmmc_host *host = mmc_priv(mmc);
- if (mmc_slot(host).init_card)
- mmc_slot(host).init_card(card);
+ if (mmc_pdata(host)->init_card)
+ mmc_pdata(host)->init_card(card);
}
static void omap_hsmmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
@@ -1957,9 +1974,9 @@
};
MODULE_DEVICE_TABLE(of, omap_mmc_of_match);
-static struct omap_mmc_platform_data *of_get_hsmmc_pdata(struct device *dev)
+static struct omap_hsmmc_platform_data *of_get_hsmmc_pdata(struct device *dev)
{
- struct omap_mmc_platform_data *pdata;
+ struct omap_hsmmc_platform_data *pdata;
struct device_node *np = dev->of_node;
u32 bus_width, max_freq;
int cd_gpio, wp_gpio;
@@ -1976,40 +1993,38 @@
if (of_find_property(np, "ti,dual-volt", NULL))
pdata->controller_flags |= OMAP_HSMMC_SUPPORTS_DUAL_VOLT;
- /* This driver only supports 1 slot */
- pdata->nr_slots = 1;
- pdata->slots[0].switch_pin = cd_gpio;
- pdata->slots[0].gpio_wp = wp_gpio;
+ pdata->switch_pin = cd_gpio;
+ pdata->gpio_wp = wp_gpio;
if (of_find_property(np, "ti,non-removable", NULL)) {
- pdata->slots[0].nonremovable = true;
- pdata->slots[0].no_regulator_off_init = true;
+ pdata->nonremovable = true;
+ pdata->no_regulator_off_init = true;
}
of_property_read_u32(np, "bus-width", &bus_width);
if (bus_width == 4)
- pdata->slots[0].caps |= MMC_CAP_4_BIT_DATA;
+ pdata->caps |= MMC_CAP_4_BIT_DATA;
else if (bus_width == 8)
- pdata->slots[0].caps |= MMC_CAP_8_BIT_DATA;
+ pdata->caps |= MMC_CAP_8_BIT_DATA;
if (of_find_property(np, "ti,needs-special-reset", NULL))
- pdata->slots[0].features |= HSMMC_HAS_UPDATED_RESET;
+ pdata->features |= HSMMC_HAS_UPDATED_RESET;
if (!of_property_read_u32(np, "max-frequency", &max_freq))
pdata->max_freq = max_freq;
if (of_find_property(np, "ti,needs-special-hs-handling", NULL))
- pdata->slots[0].features |= HSMMC_HAS_HSPE_SUPPORT;
+ pdata->features |= HSMMC_HAS_HSPE_SUPPORT;
if (of_find_property(np, "keep-power-in-suspend", NULL))
- pdata->slots[0].pm_caps |= MMC_PM_KEEP_POWER;
+ pdata->pm_caps |= MMC_PM_KEEP_POWER;
if (of_find_property(np, "enable-sdio-wakeup", NULL))
- pdata->slots[0].pm_caps |= MMC_PM_WAKE_SDIO_IRQ;
+ pdata->pm_caps |= MMC_PM_WAKE_SDIO_IRQ;
return pdata;
}
#else
-static inline struct omap_mmc_platform_data
+static inline struct omap_hsmmc_platform_data
*of_get_hsmmc_pdata(struct device *dev)
{
return ERR_PTR(-EINVAL);
@@ -2018,7 +2033,7 @@
static int omap_hsmmc_probe(struct platform_device *pdev)
{
- struct omap_mmc_platform_data *pdata = pdev->dev.platform_data;
+ struct omap_hsmmc_platform_data *pdata = pdev->dev.platform_data;
struct mmc_host *mmc;
struct omap_hsmmc_host *host = NULL;
struct resource *res;
@@ -2048,11 +2063,6 @@
return -ENXIO;
}
- if (pdata->nr_slots == 0) {
- dev_err(&pdev->dev, "No Slots\n");
- return -ENXIO;
- }
-
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_irq(pdev, 0);
if (res == NULL || irq < 0)
@@ -2062,14 +2072,10 @@
if (IS_ERR(base))
return PTR_ERR(base);
- ret = omap_hsmmc_gpio_init(pdata);
- if (ret)
- goto err;
-
mmc = mmc_alloc_host(sizeof(struct omap_hsmmc_host), &pdev->dev);
if (!mmc) {
ret = -ENOMEM;
- goto err_alloc;
+ goto err;
}
host = mmc_priv(mmc);
@@ -2079,13 +2085,16 @@
host->use_dma = 1;
host->dma_ch = -1;
host->irq = irq;
- host->slot_id = 0;
host->mapbase = res->start + pdata->reg_offset;
host->base = base + pdata->reg_offset;
host->power_mode = MMC_POWER_OFF;
host->next_data.cookie = 1;
host->pbias_enabled = 0;
+ ret = omap_hsmmc_gpio_init(host, pdata);
+ if (ret)
+ goto err_gpio;
+
platform_set_drvdata(pdev, host);
if (pdev->dev.of_node)
@@ -2144,14 +2153,14 @@
mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
MMC_CAP_WAIT_WHILE_BUSY | MMC_CAP_ERASE;
- mmc->caps |= mmc_slot(host).caps;
+ mmc->caps |= mmc_pdata(host)->caps;
if (mmc->caps & MMC_CAP_8_BIT_DATA)
mmc->caps |= MMC_CAP_4_BIT_DATA;
- if (mmc_slot(host).nonremovable)
+ if (mmc_pdata(host)->nonremovable)
mmc->caps |= MMC_CAP_NONREMOVABLE;
- mmc->pm_caps = mmc_slot(host).pm_caps;
+ mmc->pm_caps = mmc_pdata(host)->pm_caps;
omap_hsmmc_conf_bus_power(host);
@@ -2204,27 +2213,19 @@
goto err_irq;
}
- if (pdata->init != NULL) {
- if (pdata->init(&pdev->dev) != 0) {
- dev_err(mmc_dev(host->mmc),
- "Unable to configure MMC IRQs\n");
- goto err_irq;
- }
- }
-
- if (omap_hsmmc_have_reg() && !mmc_slot(host).set_power) {
+ if (omap_hsmmc_have_reg() && !mmc_pdata(host)->set_power) {
ret = omap_hsmmc_reg_get(host);
if (ret)
- goto err_reg;
+ goto err_irq;
host->use_reg = 1;
}
- mmc->ocr_avail = mmc_slot(host).ocr_mask;
+ mmc->ocr_avail = mmc_pdata(host)->ocr_mask;
/* Request IRQ for card detect */
- if ((mmc_slot(host).card_detect_irq)) {
+ if (host->card_detect_irq) {
ret = devm_request_threaded_irq(&pdev->dev,
- mmc_slot(host).card_detect_irq,
+ host->card_detect_irq,
NULL, omap_hsmmc_detect,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
mmc_hostname(mmc), host);
@@ -2233,8 +2234,8 @@
"Unable to grab MMC CD IRQ\n");
goto err_irq_cd;
}
- pdata->suspend = omap_hsmmc_suspend_cdirq;
- pdata->resume = omap_hsmmc_resume_cdirq;
+ host->suspend = omap_hsmmc_suspend_cdirq;
+ host->resume = omap_hsmmc_resume_cdirq;
}
omap_hsmmc_disable_irq(host);
@@ -2255,12 +2256,12 @@
mmc_add_host(mmc);
- if (mmc_slot(host).name != NULL) {
+ if (mmc_pdata(host)->name != NULL) {
ret = device_create_file(&mmc->class_dev, &dev_attr_slot_name);
if (ret < 0)
goto err_slot_name;
}
- if (mmc_slot(host).card_detect_irq && mmc_slot(host).get_cover_state) {
+ if (host->card_detect_irq && host->get_cover_state) {
ret = device_create_file(&mmc->class_dev,
&dev_attr_cover_switch);
if (ret < 0)
@@ -2278,9 +2279,6 @@
err_irq_cd:
if (host->use_reg)
omap_hsmmc_reg_put(host);
-err_reg:
- if (host->pdata->cleanup)
- host->pdata->cleanup(&pdev->dev);
err_irq:
if (host->tx_chan)
dma_release_channel(host->tx_chan);
@@ -2291,9 +2289,9 @@
if (host->dbclk)
clk_disable_unprepare(host->dbclk);
err1:
+ omap_hsmmc_gpio_free(host, pdata);
+err_gpio:
mmc_free_host(mmc);
-err_alloc:
- omap_hsmmc_gpio_free(pdata);
err:
return ret;
}
@@ -2306,8 +2304,6 @@
mmc_remove_host(host->mmc);
if (host->use_reg)
omap_hsmmc_reg_put(host);
- if (host->pdata->cleanup)
- host->pdata->cleanup(&pdev->dev);
if (host->tx_chan)
dma_release_channel(host->tx_chan);
@@ -2319,7 +2315,7 @@
if (host->dbclk)
clk_disable_unprepare(host->dbclk);
- omap_hsmmc_gpio_free(host->pdata);
+ omap_hsmmc_gpio_free(host, host->pdata);
mmc_free_host(host->mmc);
return 0;
@@ -2330,8 +2326,8 @@
{
struct omap_hsmmc_host *host = dev_get_drvdata(dev);
- if (host->pdata->suspend)
- return host->pdata->suspend(dev, host->slot_id);
+ if (host->suspend)
+ return host->suspend(dev);
return 0;
}
@@ -2340,8 +2336,8 @@
{
struct omap_hsmmc_host *host = dev_get_drvdata(dev);
- if (host->pdata->resume)
- host->pdata->resume(dev, host->slot_id);
+ if (host->resume)
+ host->resume(dev);
}
diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c
index 9cccc0e..daba49a 100644
--- a/drivers/mmc/host/sdhci-acpi.c
+++ b/drivers/mmc/host/sdhci-acpi.c
@@ -76,6 +76,7 @@
const struct sdhci_acpi_slot *slot;
struct platform_device *pdev;
bool use_runtime_pm;
+ bool dma_setup;
};
static inline bool sdhci_acpi_flag(struct sdhci_acpi_host *c, unsigned int flag)
@@ -85,7 +86,29 @@
static int sdhci_acpi_enable_dma(struct sdhci_host *host)
{
- return 0;
+ struct sdhci_acpi_host *c = sdhci_priv(host);
+ struct device *dev = &c->pdev->dev;
+ int err = -1;
+
+ if (c->dma_setup)
+ return 0;
+
+ if (host->flags & SDHCI_USE_64_BIT_DMA) {
+ if (host->quirks2 & SDHCI_QUIRK2_BROKEN_64_BIT_DMA) {
+ host->flags &= ~SDHCI_USE_64_BIT_DMA;
+ } else {
+ err = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64));
+ if (err)
+ dev_warn(dev, "Failed to set 64-bit DMA mask\n");
+ }
+ }
+
+ if (err)
+ err = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
+
+ c->dma_setup = !err;
+
+ return err;
}
static void sdhci_acpi_int_hw_reset(struct sdhci_host *host)
@@ -180,17 +203,21 @@
static const struct sdhci_acpi_slot sdhci_acpi_slot_int_emmc = {
.chip = &sdhci_acpi_chip_int,
.caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE |
- MMC_CAP_HW_RESET | MMC_CAP_1_8V_DDR,
+ MMC_CAP_HW_RESET | MMC_CAP_1_8V_DDR |
+ MMC_CAP_BUS_WIDTH_TEST | MMC_CAP_WAIT_WHILE_BUSY,
.caps2 = MMC_CAP2_HC_ERASE_SZ,
.flags = SDHCI_ACPI_RUNTIME_PM,
+ .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN | SDHCI_QUIRK2_STOP_WITH_TC,
.probe_slot = sdhci_acpi_emmc_probe_slot,
};
static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sdio = {
- .quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION,
+ .quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION |
+ SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
.quirks2 = SDHCI_QUIRK2_HOST_OFF_CARD_ON,
- .caps = MMC_CAP_NONREMOVABLE | MMC_CAP_POWER_OFF_CARD,
+ .caps = MMC_CAP_NONREMOVABLE | MMC_CAP_POWER_OFF_CARD |
+ MMC_CAP_BUS_WIDTH_TEST | MMC_CAP_WAIT_WHILE_BUSY,
.flags = SDHCI_ACPI_RUNTIME_PM,
.pm_caps = MMC_PM_KEEP_POWER,
.probe_slot = sdhci_acpi_sdio_probe_slot,
@@ -199,8 +226,10 @@
static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sd = {
.flags = SDHCI_ACPI_SD_CD | SDHCI_ACPI_SD_CD_OVERRIDE_LEVEL |
SDHCI_ACPI_RUNTIME_PM,
+ .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
.quirks2 = SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON |
SDHCI_QUIRK2_STOP_WITH_TC,
+ .caps = MMC_CAP_BUS_WIDTH_TEST | MMC_CAP_WAIT_WHILE_BUSY,
.probe_slot = sdhci_acpi_sd_probe_slot,
};
@@ -305,21 +334,6 @@
goto err_free;
}
- if (!dev->dma_mask) {
- u64 dma_mask;
-
- if (sdhci_readl(host, SDHCI_CAPABILITIES) & SDHCI_CAN_64BIT) {
- /* 64-bit DMA is not supported at present */
- dma_mask = DMA_BIT_MASK(32);
- } else {
- dma_mask = DMA_BIT_MASK(32);
- }
-
- err = dma_coerce_mask_and_coherent(dev, dma_mask);
- if (err)
- goto err_free;
- }
-
if (c->slot) {
if (c->slot->probe_slot) {
err = c->slot->probe_slot(pdev, hid, uid);
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 587ee0e..12711ab 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -65,8 +65,6 @@
/* NOTE: the minimum valid tuning start tap for mx6sl is 1 */
#define ESDHC_TUNING_START_TAP 0x1
-#define ESDHC_TUNING_BLOCK_PATTERN_LEN 64
-
/* pinctrl state */
#define ESDHC_PINCTRL_STATE_100MHZ "state_100mhz"
#define ESDHC_PINCTRL_STATE_200MHZ "state_200mhz"
@@ -692,8 +690,6 @@
/* FIXME: delay a bit for card to be ready for next tuning due to errors */
mdelay(1);
- /* This is balanced by the runtime put in sdhci_tasklet_finish */
- pm_runtime_get_sync(host->mmc->parent);
reg = readl(host->ioaddr + ESDHC_MIX_CTRL);
reg |= ESDHC_MIX_CTRL_EXE_TUNE | ESDHC_MIX_CTRL_SMPCLK_SEL |
ESDHC_MIX_CTRL_FBCLK_SEL;
@@ -704,54 +700,6 @@
val, readl(host->ioaddr + ESDHC_TUNE_CTRL_STATUS));
}
-static void esdhc_request_done(struct mmc_request *mrq)
-{
- complete(&mrq->completion);
-}
-
-static int esdhc_send_tuning_cmd(struct sdhci_host *host, u32 opcode,
- struct scatterlist *sg)
-{
- struct mmc_command cmd = {0};
- struct mmc_request mrq = {NULL};
- struct mmc_data data = {0};
-
- cmd.opcode = opcode;
- cmd.arg = 0;
- cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
-
- data.blksz = ESDHC_TUNING_BLOCK_PATTERN_LEN;
- data.blocks = 1;
- data.flags = MMC_DATA_READ;
- data.sg = sg;
- data.sg_len = 1;
-
- mrq.cmd = &cmd;
- mrq.cmd->mrq = &mrq;
- mrq.data = &data;
- mrq.data->mrq = &mrq;
- mrq.cmd->data = mrq.data;
-
- mrq.done = esdhc_request_done;
- init_completion(&(mrq.completion));
-
- spin_lock_irq(&host->lock);
- host->mrq = &mrq;
-
- sdhci_send_command(host, mrq.cmd);
-
- spin_unlock_irq(&host->lock);
-
- wait_for_completion(&mrq.completion);
-
- if (cmd.error)
- return cmd.error;
- if (data.error)
- return data.error;
-
- return 0;
-}
-
static void esdhc_post_tuning(struct sdhci_host *host)
{
u32 reg;
@@ -763,21 +711,13 @@
static int esdhc_executing_tuning(struct sdhci_host *host, u32 opcode)
{
- struct scatterlist sg;
- char *tuning_pattern;
int min, max, avg, ret;
- tuning_pattern = kmalloc(ESDHC_TUNING_BLOCK_PATTERN_LEN, GFP_KERNEL);
- if (!tuning_pattern)
- return -ENOMEM;
-
- sg_init_one(&sg, tuning_pattern, ESDHC_TUNING_BLOCK_PATTERN_LEN);
-
/* find the mininum delay first which can pass tuning */
min = ESDHC_TUNE_CTRL_MIN;
while (min < ESDHC_TUNE_CTRL_MAX) {
esdhc_prepare_tuning(host, min);
- if (!esdhc_send_tuning_cmd(host, opcode, &sg))
+ if (!mmc_send_tuning(host->mmc))
break;
min += ESDHC_TUNE_CTRL_STEP;
}
@@ -786,7 +726,7 @@
max = min + ESDHC_TUNE_CTRL_STEP;
while (max < ESDHC_TUNE_CTRL_MAX) {
esdhc_prepare_tuning(host, max);
- if (esdhc_send_tuning_cmd(host, opcode, &sg)) {
+ if (mmc_send_tuning(host->mmc)) {
max -= ESDHC_TUNE_CTRL_STEP;
break;
}
@@ -796,11 +736,9 @@
/* use average delay to get the best timing */
avg = (min + max) / 2;
esdhc_prepare_tuning(host, avg);
- ret = esdhc_send_tuning_cmd(host, opcode, &sg);
+ ret = mmc_send_tuning(host->mmc);
esdhc_post_tuning(host);
- kfree(tuning_pattern);
-
dev_dbg(mmc_dev(host->mmc), "tunning %s at 0x%x ret %d\n",
ret ? "failed" : "passed", avg, ret);
@@ -1031,11 +969,8 @@
imx_data->pins_default = pinctrl_lookup_state(imx_data->pinctrl,
PINCTRL_STATE_DEFAULT);
- if (IS_ERR(imx_data->pins_default)) {
- err = PTR_ERR(imx_data->pins_default);
- dev_err(mmc_dev(host->mmc), "could not get default state\n");
- goto disable_clk;
- }
+ if (IS_ERR(imx_data->pins_default))
+ dev_warn(mmc_dev(host->mmc), "could not get default state\n");
host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
@@ -1123,7 +1058,8 @@
}
/* sdr50 and sdr104 needs work on 1.8v signal voltage */
- if ((boarddata->support_vsel) && esdhc_is_usdhc(imx_data)) {
+ if ((boarddata->support_vsel) && esdhc_is_usdhc(imx_data) &&
+ !IS_ERR(imx_data->pins_default)) {
imx_data->pins_100mhz = pinctrl_lookup_state(imx_data->pinctrl,
ESDHC_PINCTRL_STATE_100MHZ);
imx_data->pins_200mhz = pinctrl_lookup_state(imx_data->pinctrl,
diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
index 30804385..3d32ce8 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -339,9 +339,7 @@
static int sdhci_msm_execute_tuning(struct sdhci_host *host, u32 opcode)
{
int tuning_seq_cnt = 3;
- u8 phase, *data_buf, tuned_phases[16], tuned_phase_cnt = 0;
- const u8 *tuning_block_pattern = tuning_blk_pattern_4bit;
- int size = sizeof(tuning_blk_pattern_4bit);
+ u8 phase, tuned_phases[16], tuned_phase_cnt = 0;
int rc;
struct mmc_host *mmc = host->mmc;
struct mmc_ios ios = host->mmc->ios;
@@ -355,53 +353,21 @@
(ios.timing == MMC_TIMING_UHS_SDR104)))
return 0;
- if ((opcode == MMC_SEND_TUNING_BLOCK_HS200) &&
- (mmc->ios.bus_width == MMC_BUS_WIDTH_8)) {
- tuning_block_pattern = tuning_blk_pattern_8bit;
- size = sizeof(tuning_blk_pattern_8bit);
- }
-
- data_buf = kmalloc(size, GFP_KERNEL);
- if (!data_buf)
- return -ENOMEM;
-
retry:
/* First of all reset the tuning block */
rc = msm_init_cm_dll(host);
if (rc)
- goto out;
+ return rc;
phase = 0;
do {
- struct mmc_command cmd = { 0 };
- struct mmc_data data = { 0 };
- struct mmc_request mrq = {
- .cmd = &cmd,
- .data = &data
- };
- struct scatterlist sg;
-
/* Set the phase in delay line hw block */
rc = msm_config_cm_dll_phase(host, phase);
if (rc)
- goto out;
+ return rc;
- cmd.opcode = opcode;
- cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
-
- data.blksz = size;
- data.blocks = 1;
- data.flags = MMC_DATA_READ;
- data.timeout_ns = NSEC_PER_SEC; /* 1 second */
-
- data.sg = &sg;
- data.sg_len = 1;
- sg_init_one(&sg, data_buf, size);
- memset(data_buf, 0, size);
- mmc_wait_for_req(mmc, &mrq);
-
- if (!cmd.error && !data.error &&
- !memcmp(data_buf, tuning_block_pattern, size)) {
+ rc = mmc_send_tuning(mmc);
+ if (!rc) {
/* Tuning is successful at this tuning point */
tuned_phases[tuned_phase_cnt++] = phase;
dev_dbg(mmc_dev(mmc), "%s: Found good phase = %d\n",
@@ -413,7 +379,7 @@
rc = msm_find_most_appropriate_phase(host, tuned_phases,
tuned_phase_cnt);
if (rc < 0)
- goto out;
+ return rc;
else
phase = rc;
@@ -423,7 +389,7 @@
*/
rc = msm_config_cm_dll_phase(host, phase);
if (rc)
- goto out;
+ return rc;
dev_dbg(mmc_dev(mmc), "%s: Setting the tuning phase to %d\n",
mmc_hostname(mmc), phase);
} else {
@@ -435,8 +401,6 @@
rc = -EIO;
}
-out:
- kfree(data_buf);
return rc;
}
diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index 981d66e..bcb51e9 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -165,7 +165,6 @@
host = sdhci_pltfm_init(pdev, &sdhci_arasan_pdata, 0);
if (IS_ERR(host)) {
ret = PTR_ERR(host);
- dev_err(&pdev->dev, "platform init failed (%u)\n", ret);
goto clk_disable_all;
}
@@ -175,10 +174,8 @@
pltfm_host->clk = clk_xin;
ret = sdhci_add_host(host);
- if (ret) {
- dev_err(&pdev->dev, "platform register failed (%u)\n", ret);
+ if (ret)
goto err_pltfm_free;
- }
return 0;
diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c
index 5670e38..e2ec108d 100644
--- a/drivers/mmc/host/sdhci-pci-o2micro.c
+++ b/drivers/mmc/host/sdhci-pci-o2micro.c
@@ -127,8 +127,6 @@
return;
scratch_32 &= ~((1 << 21) | (1 << 30));
- /* Set RTD3 function disabled */
- scratch_32 |= ((1 << 29) | (1 << 28));
pci_write_config_dword(chip->pdev, O2_SD_FUNC_REG3, scratch_32);
/* Set L1 Entrance Timer */
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index 6119297..95f7300 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -269,7 +269,9 @@
static int byt_emmc_probe_slot(struct sdhci_pci_slot *slot)
{
slot->host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE |
- MMC_CAP_HW_RESET | MMC_CAP_1_8V_DDR;
+ MMC_CAP_HW_RESET | MMC_CAP_1_8V_DDR |
+ MMC_CAP_BUS_WIDTH_TEST |
+ MMC_CAP_WAIT_WHILE_BUSY;
slot->host->mmc->caps2 |= MMC_CAP2_HC_ERASE_SZ;
slot->hw_reset = sdhci_pci_int_hw_reset;
if (slot->chip->pdev->device == PCI_DEVICE_ID_INTEL_BSW_EMMC)
@@ -279,12 +281,16 @@
static int byt_sdio_probe_slot(struct sdhci_pci_slot *slot)
{
- slot->host->mmc->caps |= MMC_CAP_POWER_OFF_CARD | MMC_CAP_NONREMOVABLE;
+ slot->host->mmc->caps |= MMC_CAP_POWER_OFF_CARD | MMC_CAP_NONREMOVABLE |
+ MMC_CAP_BUS_WIDTH_TEST |
+ MMC_CAP_WAIT_WHILE_BUSY;
return 0;
}
static int byt_sd_probe_slot(struct sdhci_pci_slot *slot)
{
+ slot->host->mmc->caps |= MMC_CAP_BUS_WIDTH_TEST |
+ MMC_CAP_WAIT_WHILE_BUSY;
slot->cd_con_id = NULL;
slot->cd_idx = 0;
slot->cd_override_level = true;
@@ -294,11 +300,13 @@
static const struct sdhci_pci_fixes sdhci_intel_byt_emmc = {
.allow_runtime_pm = true,
.probe_slot = byt_emmc_probe_slot,
+ .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
SDHCI_QUIRK2_STOP_WITH_TC,
};
static const struct sdhci_pci_fixes sdhci_intel_byt_sdio = {
+ .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
.quirks2 = SDHCI_QUIRK2_HOST_OFF_CARD_ON |
SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
.allow_runtime_pm = true,
@@ -306,6 +314,7 @@
};
static const struct sdhci_pci_fixes sdhci_intel_byt_sd = {
+ .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
.quirks2 = SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON |
SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
SDHCI_QUIRK2_STOP_WITH_TC,
@@ -645,6 +654,25 @@
.probe_slot = rtsx_probe_slot,
};
+static int amd_probe(struct sdhci_pci_chip *chip)
+{
+ struct pci_dev *smbus_dev;
+
+ smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD,
+ PCI_DEVICE_ID_AMD_HUDSON2_SMBUS, NULL);
+
+ if (smbus_dev && (smbus_dev->revision < 0x51)) {
+ chip->quirks2 |= SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD;
+ chip->quirks2 |= SDHCI_QUIRK2_BROKEN_HS200;
+ }
+
+ return 0;
+}
+
+static const struct sdhci_pci_fixes sdhci_amd = {
+ .probe = amd_probe,
+};
+
static const struct pci_device_id pci_ids[] = {
{
.vendor = PCI_VENDOR_ID_RICOH,
@@ -1044,7 +1072,15 @@
.subdevice = PCI_ANY_ID,
.driver_data = (kernel_ulong_t)&sdhci_o2,
},
-
+ {
+ .vendor = PCI_VENDOR_ID_AMD,
+ .device = PCI_ANY_ID,
+ .class = PCI_CLASS_SYSTEM_SDHCI << 8,
+ .class_mask = 0xFFFF00,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .driver_data = (kernel_ulong_t)&sdhci_amd,
+ },
{ /* Generic SD host controller */
PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00)
},
@@ -1064,7 +1100,7 @@
{
struct sdhci_pci_slot *slot;
struct pci_dev *pdev;
- int ret;
+ int ret = -1;
slot = sdhci_priv(host);
pdev = slot->chip->pdev;
@@ -1076,7 +1112,17 @@
"doesn't fully claim to support it.\n");
}
- ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (host->flags & SDHCI_USE_64_BIT_DMA) {
+ if (host->quirks2 & SDHCI_QUIRK2_BROKEN_64_BIT_DMA) {
+ host->flags &= ~SDHCI_USE_64_BIT_DMA;
+ } else {
+ ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
+ if (ret)
+ dev_warn(&pdev->dev, "Failed to set 64-bit DMA mask\n");
+ }
+ }
+ if (ret)
+ ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (ret)
return ret;
diff --git a/drivers/mmc/host/sdhci-pxav2.c b/drivers/mmc/host/sdhci-pxav2.c
index b4c23e9..f98008b 100644
--- a/drivers/mmc/host/sdhci-pxav2.c
+++ b/drivers/mmc/host/sdhci-pxav2.c
@@ -167,23 +167,17 @@
struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
struct device *dev = &pdev->dev;
struct sdhci_host *host = NULL;
- struct sdhci_pxa *pxa = NULL;
const struct of_device_id *match;
int ret;
struct clk *clk;
- pxa = kzalloc(sizeof(struct sdhci_pxa), GFP_KERNEL);
- if (!pxa)
- return -ENOMEM;
-
host = sdhci_pltfm_init(pdev, NULL, 0);
- if (IS_ERR(host)) {
- kfree(pxa);
+ if (IS_ERR(host))
return PTR_ERR(host);
- }
+
pltfm_host = sdhci_priv(host);
- pltfm_host->priv = pxa;
+ pltfm_host->priv = NULL;
clk = clk_get(dev, "PXA-SDHCLK");
if (IS_ERR(clk)) {
@@ -238,7 +232,6 @@
clk_put(clk);
err_clk_get:
sdhci_pltfm_free(pdev);
- kfree(pxa);
return ret;
}
@@ -246,14 +239,12 @@
{
struct sdhci_host *host = platform_get_drvdata(pdev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
- struct sdhci_pxa *pxa = pltfm_host->priv;
sdhci_remove_host(host, 1);
clk_disable_unprepare(pltfm_host->clk);
clk_put(pltfm_host->clk);
sdhci_pltfm_free(pdev);
- kfree(pxa);
return 0;
}
diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index 5036d7d..ad0bada 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -58,6 +58,12 @@
#define SDCE_MISC_INT (1<<2)
#define SDCE_MISC_INT_EN (1<<1)
+struct sdhci_pxa {
+ struct clk *clk_core;
+ struct clk *clk_io;
+ u8 power_mode;
+};
+
/*
* These registers are relative to the second register region, for the
* MBus bridge.
@@ -211,6 +217,7 @@
case MMC_TIMING_UHS_SDR104:
ctrl_2 |= SDHCI_CTRL_UHS_SDR104 | SDHCI_CTRL_VDD_180;
break;
+ case MMC_TIMING_MMC_DDR52:
case MMC_TIMING_UHS_DDR50:
ctrl_2 |= SDHCI_CTRL_UHS_DDR50 | SDHCI_CTRL_VDD_180;
break;
@@ -283,9 +290,7 @@
struct sdhci_host *host = NULL;
struct sdhci_pxa *pxa = NULL;
const struct of_device_id *match;
-
int ret;
- struct clk *clk;
pxa = devm_kzalloc(&pdev->dev, sizeof(struct sdhci_pxa), GFP_KERNEL);
if (!pxa)
@@ -305,14 +310,20 @@
pltfm_host = sdhci_priv(host);
pltfm_host->priv = pxa;
- clk = devm_clk_get(dev, NULL);
- if (IS_ERR(clk)) {
+ pxa->clk_io = devm_clk_get(dev, "io");
+ if (IS_ERR(pxa->clk_io))
+ pxa->clk_io = devm_clk_get(dev, NULL);
+ if (IS_ERR(pxa->clk_io)) {
dev_err(dev, "failed to get io clock\n");
- ret = PTR_ERR(clk);
+ ret = PTR_ERR(pxa->clk_io);
goto err_clk_get;
}
- pltfm_host->clk = clk;
- clk_prepare_enable(clk);
+ pltfm_host->clk = pxa->clk_io;
+ clk_prepare_enable(pxa->clk_io);
+
+ pxa->clk_core = devm_clk_get(dev, "core");
+ if (!IS_ERR(pxa->clk_core))
+ clk_prepare_enable(pxa->clk_core);
/* enable 1/8V DDR capable */
host->mmc->caps |= MMC_CAP_1_8V_DDR;
@@ -385,7 +396,9 @@
pm_runtime_disable(&pdev->dev);
err_of_parse:
err_cd_req:
- clk_disable_unprepare(clk);
+ clk_disable_unprepare(pxa->clk_io);
+ if (!IS_ERR(pxa->clk_core))
+ clk_disable_unprepare(pxa->clk_core);
err_clk_get:
err_mbus_win:
sdhci_pltfm_free(pdev);
@@ -396,12 +409,15 @@
{
struct sdhci_host *host = platform_get_drvdata(pdev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_pxa *pxa = pltfm_host->priv;
pm_runtime_get_sync(&pdev->dev);
sdhci_remove_host(host, 1);
pm_runtime_disable(&pdev->dev);
- clk_disable_unprepare(pltfm_host->clk);
+ clk_disable_unprepare(pxa->clk_io);
+ if (!IS_ERR(pxa->clk_core))
+ clk_disable_unprepare(pxa->clk_core);
sdhci_pltfm_free(pdev);
@@ -441,15 +457,16 @@
{
struct sdhci_host *host = dev_get_drvdata(dev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_pxa *pxa = pltfm_host->priv;
unsigned long flags;
- if (pltfm_host->clk) {
- spin_lock_irqsave(&host->lock, flags);
- host->runtime_suspended = true;
- spin_unlock_irqrestore(&host->lock, flags);
+ spin_lock_irqsave(&host->lock, flags);
+ host->runtime_suspended = true;
+ spin_unlock_irqrestore(&host->lock, flags);
- clk_disable_unprepare(pltfm_host->clk);
- }
+ clk_disable_unprepare(pxa->clk_io);
+ if (!IS_ERR(pxa->clk_core))
+ clk_disable_unprepare(pxa->clk_core);
return 0;
}
@@ -458,15 +475,16 @@
{
struct sdhci_host *host = dev_get_drvdata(dev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_pxa *pxa = pltfm_host->priv;
unsigned long flags;
- if (pltfm_host->clk) {
- clk_prepare_enable(pltfm_host->clk);
+ clk_prepare_enable(pxa->clk_io);
+ if (!IS_ERR(pxa->clk_core))
+ clk_prepare_enable(pxa->clk_core);
- spin_lock_irqsave(&host->lock, flags);
- host->runtime_suspended = false;
- spin_unlock_irqrestore(&host->lock, flags);
- }
+ spin_lock_irqsave(&host->lock, flags);
+ host->runtime_suspended = false;
+ spin_unlock_irqrestore(&host->lock, flags);
return 0;
}
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index 0ce6eb1..4f7a6321 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -300,6 +300,7 @@
struct device *dev = &ourhost->pdev->dev;
unsigned long timeout;
u16 clk = 0;
+ int ret;
host->mmc->actual_clock = 0;
@@ -311,7 +312,12 @@
sdhci_s3c_set_clock(host, clock);
- clk_set_rate(ourhost->clk_bus[ourhost->cur_clk], clock);
+ ret = clk_set_rate(ourhost->clk_bus[ourhost->cur_clk], clock);
+ if (ret != 0) {
+ dev_err(dev, "%s: failed to set clock rate %uHz\n",
+ mmc_hostname(host->mmc), clock);
+ return;
+ }
clk = SDHCI_CLOCK_INT_EN;
sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index ada1a3e..73de62a 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -44,8 +44,6 @@
#define MAX_TUNING_LOOP 40
-#define ADMA_SIZE ((128 * 2 + 1) * 4)
-
static unsigned int debug_quirks = 0;
static unsigned int debug_quirks2;
@@ -119,10 +117,17 @@
pr_debug(DRIVER_NAME ": Host ctl2: 0x%08x\n",
sdhci_readw(host, SDHCI_HOST_CONTROL2));
- if (host->flags & SDHCI_USE_ADMA)
- pr_debug(DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x\n",
- readl(host->ioaddr + SDHCI_ADMA_ERROR),
- readl(host->ioaddr + SDHCI_ADMA_ADDRESS));
+ if (host->flags & SDHCI_USE_ADMA) {
+ if (host->flags & SDHCI_USE_64_BIT_DMA)
+ pr_debug(DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x%08x\n",
+ readl(host->ioaddr + SDHCI_ADMA_ERROR),
+ readl(host->ioaddr + SDHCI_ADMA_ADDRESS_HI),
+ readl(host->ioaddr + SDHCI_ADMA_ADDRESS));
+ else
+ pr_debug(DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x\n",
+ readl(host->ioaddr + SDHCI_ADMA_ERROR),
+ readl(host->ioaddr + SDHCI_ADMA_ADDRESS));
+ }
pr_debug(DRIVER_NAME ": ===========================================\n");
}
@@ -448,18 +453,26 @@
local_irq_restore(*flags);
}
-static void sdhci_set_adma_desc(u8 *desc, u32 addr, int len, unsigned cmd)
+static void sdhci_adma_write_desc(struct sdhci_host *host, void *desc,
+ dma_addr_t addr, int len, unsigned cmd)
{
- __le32 *dataddr = (__le32 __force *)(desc + 4);
- __le16 *cmdlen = (__le16 __force *)desc;
+ struct sdhci_adma2_64_desc *dma_desc = desc;
- /* SDHCI specification says ADMA descriptors should be 4 byte
- * aligned, so using 16 or 32bit operations should be safe. */
+ /* 32-bit and 64-bit descriptors have these members in same position */
+ dma_desc->cmd = cpu_to_le16(cmd);
+ dma_desc->len = cpu_to_le16(len);
+ dma_desc->addr_lo = cpu_to_le32((u32)addr);
- cmdlen[0] = cpu_to_le16(cmd);
- cmdlen[1] = cpu_to_le16(len);
+ if (host->flags & SDHCI_USE_64_BIT_DMA)
+ dma_desc->addr_hi = cpu_to_le32((u64)addr >> 32);
+}
- dataddr[0] = cpu_to_le32(addr);
+static void sdhci_adma_mark_end(void *desc)
+{
+ struct sdhci_adma2_64_desc *dma_desc = desc;
+
+ /* 32-bit and 64-bit descriptors have 'cmd' in same position */
+ dma_desc->cmd |= cpu_to_le16(ADMA2_END);
}
static int sdhci_adma_table_pre(struct sdhci_host *host,
@@ -467,8 +480,8 @@
{
int direction;
- u8 *desc;
- u8 *align;
+ void *desc;
+ void *align;
dma_addr_t addr;
dma_addr_t align_addr;
int len, offset;
@@ -489,17 +502,17 @@
direction = DMA_TO_DEVICE;
host->align_addr = dma_map_single(mmc_dev(host->mmc),
- host->align_buffer, 128 * 4, direction);
+ host->align_buffer, host->align_buffer_sz, direction);
if (dma_mapping_error(mmc_dev(host->mmc), host->align_addr))
goto fail;
- BUG_ON(host->align_addr & 0x3);
+ BUG_ON(host->align_addr & host->align_mask);
host->sg_count = dma_map_sg(mmc_dev(host->mmc),
data->sg, data->sg_len, direction);
if (host->sg_count == 0)
goto unmap_align;
- desc = host->adma_desc;
+ desc = host->adma_table;
align = host->align_buffer;
align_addr = host->align_addr;
@@ -515,24 +528,27 @@
* the (up to three) bytes that screw up the
* alignment.
*/
- offset = (4 - (addr & 0x3)) & 0x3;
+ offset = (host->align_sz - (addr & host->align_mask)) &
+ host->align_mask;
if (offset) {
if (data->flags & MMC_DATA_WRITE) {
buffer = sdhci_kmap_atomic(sg, &flags);
- WARN_ON(((long)buffer & PAGE_MASK) > (PAGE_SIZE - 3));
+ WARN_ON(((long)buffer & (PAGE_SIZE - 1)) >
+ (PAGE_SIZE - offset));
memcpy(align, buffer, offset);
sdhci_kunmap_atomic(buffer, &flags);
}
/* tran, valid */
- sdhci_set_adma_desc(desc, align_addr, offset, 0x21);
+ sdhci_adma_write_desc(host, desc, align_addr, offset,
+ ADMA2_TRAN_VALID);
BUG_ON(offset > 65536);
- align += 4;
- align_addr += 4;
+ align += host->align_sz;
+ align_addr += host->align_sz;
- desc += 8;
+ desc += host->desc_sz;
addr += offset;
len -= offset;
@@ -541,23 +557,23 @@
BUG_ON(len > 65536);
/* tran, valid */
- sdhci_set_adma_desc(desc, addr, len, 0x21);
- desc += 8;
+ sdhci_adma_write_desc(host, desc, addr, len, ADMA2_TRAN_VALID);
+ desc += host->desc_sz;
/*
* If this triggers then we have a calculation bug
* somewhere. :/
*/
- WARN_ON((desc - host->adma_desc) > ADMA_SIZE);
+ WARN_ON((desc - host->adma_table) >= host->adma_table_sz);
}
if (host->quirks & SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC) {
/*
* Mark the last descriptor as the terminating descriptor
*/
- if (desc != host->adma_desc) {
- desc -= 8;
- desc[0] |= 0x2; /* end */
+ if (desc != host->adma_table) {
+ desc -= host->desc_sz;
+ sdhci_adma_mark_end(desc);
}
} else {
/*
@@ -565,7 +581,7 @@
*/
/* nop, end, valid */
- sdhci_set_adma_desc(desc, 0, 0, 0x3);
+ sdhci_adma_write_desc(host, desc, 0, 0, ADMA2_NOP_END_VALID);
}
/*
@@ -573,14 +589,14 @@
*/
if (data->flags & MMC_DATA_WRITE) {
dma_sync_single_for_device(mmc_dev(host->mmc),
- host->align_addr, 128 * 4, direction);
+ host->align_addr, host->align_buffer_sz, direction);
}
return 0;
unmap_align:
dma_unmap_single(mmc_dev(host->mmc), host->align_addr,
- 128 * 4, direction);
+ host->align_buffer_sz, direction);
fail:
return -EINVAL;
}
@@ -592,7 +608,7 @@
struct scatterlist *sg;
int i, size;
- u8 *align;
+ void *align;
char *buffer;
unsigned long flags;
bool has_unaligned;
@@ -603,12 +619,12 @@
direction = DMA_TO_DEVICE;
dma_unmap_single(mmc_dev(host->mmc), host->align_addr,
- 128 * 4, direction);
+ host->align_buffer_sz, direction);
/* Do a quick scan of the SG list for any unaligned mappings */
has_unaligned = false;
for_each_sg(data->sg, sg, host->sg_count, i)
- if (sg_dma_address(sg) & 3) {
+ if (sg_dma_address(sg) & host->align_mask) {
has_unaligned = true;
break;
}
@@ -620,15 +636,17 @@
align = host->align_buffer;
for_each_sg(data->sg, sg, host->sg_count, i) {
- if (sg_dma_address(sg) & 0x3) {
- size = 4 - (sg_dma_address(sg) & 0x3);
+ if (sg_dma_address(sg) & host->align_mask) {
+ size = host->align_sz -
+ (sg_dma_address(sg) & host->align_mask);
buffer = sdhci_kmap_atomic(sg, &flags);
- WARN_ON(((long)buffer & PAGE_MASK) > (PAGE_SIZE - 3));
+ WARN_ON(((long)buffer & (PAGE_SIZE - 1)) >
+ (PAGE_SIZE - size));
memcpy(buffer, align, size);
sdhci_kunmap_atomic(buffer, &flags);
- align += 4;
+ align += host->align_sz;
}
}
}
@@ -822,6 +840,10 @@
} else {
sdhci_writel(host, host->adma_addr,
SDHCI_ADMA_ADDRESS);
+ if (host->flags & SDHCI_USE_64_BIT_DMA)
+ sdhci_writel(host,
+ (u64)host->adma_addr >> 32,
+ SDHCI_ADMA_ADDRESS_HI);
}
} else {
int sg_cnt;
@@ -855,10 +877,14 @@
ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
ctrl &= ~SDHCI_CTRL_DMA_MASK;
if ((host->flags & SDHCI_REQ_USE_DMA) &&
- (host->flags & SDHCI_USE_ADMA))
- ctrl |= SDHCI_CTRL_ADMA32;
- else
+ (host->flags & SDHCI_USE_ADMA)) {
+ if (host->flags & SDHCI_USE_64_BIT_DMA)
+ ctrl |= SDHCI_CTRL_ADMA64;
+ else
+ ctrl |= SDHCI_CTRL_ADMA32;
+ } else {
ctrl |= SDHCI_CTRL_SDMA;
+ }
sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
}
@@ -889,10 +915,15 @@
struct mmc_data *data = cmd->data;
if (data == NULL) {
+ if (host->quirks2 &
+ SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD) {
+ sdhci_writew(host, 0x0, SDHCI_TRANSFER_MODE);
+ } else {
/* clear Auto CMD settings for no data CMDs */
- mode = sdhci_readw(host, SDHCI_TRANSFER_MODE);
- sdhci_writew(host, mode & ~(SDHCI_TRNS_AUTO_CMD12 |
+ mode = sdhci_readw(host, SDHCI_TRANSFER_MODE);
+ sdhci_writew(host, mode & ~(SDHCI_TRNS_AUTO_CMD12 |
SDHCI_TRNS_AUTO_CMD23), SDHCI_TRANSFER_MODE);
+ }
return;
}
@@ -1117,6 +1148,9 @@
case MMC_TIMING_UHS_DDR50:
preset = sdhci_readw(host, SDHCI_PRESET_FOR_DDR50);
break;
+ case MMC_TIMING_MMC_HS400:
+ preset = sdhci_readw(host, SDHCI_PRESET_FOR_HS400);
+ break;
default:
pr_warn("%s: Invalid UHS-I mode selected\n",
mmc_hostname(host->mmc));
@@ -1444,6 +1478,8 @@
else if ((timing == MMC_TIMING_UHS_DDR50) ||
(timing == MMC_TIMING_MMC_DDR52))
ctrl_2 |= SDHCI_CTRL_UHS_DDR50;
+ else if (timing == MMC_TIMING_MMC_HS400)
+ ctrl_2 |= SDHCI_CTRL_HS400; /* Non-standard */
sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
}
EXPORT_SYMBOL_GPL(sdhci_set_uhs_signaling);
@@ -1515,7 +1551,8 @@
u16 clk, ctrl_2;
/* In case of UHS-I modes, set High Speed Enable */
- if ((ios->timing == MMC_TIMING_MMC_HS200) ||
+ if ((ios->timing == MMC_TIMING_MMC_HS400) ||
+ (ios->timing == MMC_TIMING_MMC_HS200) ||
(ios->timing == MMC_TIMING_MMC_DDR52) ||
(ios->timing == MMC_TIMING_UHS_SDR50) ||
(ios->timing == MMC_TIMING_UHS_SDR104) ||
@@ -1862,6 +1899,7 @@
* tuning function has to be executed.
*/
switch (host->timing) {
+ case MMC_TIMING_MMC_HS400:
case MMC_TIMING_MMC_HS200:
case MMC_TIMING_UHS_SDR104:
break;
@@ -2144,9 +2182,10 @@
*/
if (!(host->flags & SDHCI_DEVICE_DEAD) &&
((mrq->cmd && mrq->cmd->error) ||
- (mrq->data && (mrq->data->error ||
- (mrq->data->stop && mrq->data->stop->error))) ||
- (host->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST))) {
+ (mrq->sbc && mrq->sbc->error) ||
+ (mrq->data && ((mrq->data->error && !mrq->data->stop) ||
+ (mrq->data->stop && mrq->data->stop->error))) ||
+ (host->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST))) {
/* Some controllers need this kick or reset won't work here */
if (host->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET)
@@ -2282,32 +2321,36 @@
}
#ifdef CONFIG_MMC_DEBUG
-static void sdhci_show_adma_error(struct sdhci_host *host)
+static void sdhci_adma_show_error(struct sdhci_host *host)
{
const char *name = mmc_hostname(host->mmc);
- u8 *desc = host->adma_desc;
- __le32 *dma;
- __le16 *len;
- u8 attr;
+ void *desc = host->adma_table;
sdhci_dumpregs(host);
while (true) {
- dma = (__le32 *)(desc + 4);
- len = (__le16 *)(desc + 2);
- attr = *desc;
+ struct sdhci_adma2_64_desc *dma_desc = desc;
- DBG("%s: %p: DMA 0x%08x, LEN 0x%04x, Attr=0x%02x\n",
- name, desc, le32_to_cpu(*dma), le16_to_cpu(*len), attr);
+ if (host->flags & SDHCI_USE_64_BIT_DMA)
+ DBG("%s: %p: DMA 0x%08x%08x, LEN 0x%04x, Attr=0x%02x\n",
+ name, desc, le32_to_cpu(dma_desc->addr_hi),
+ le32_to_cpu(dma_desc->addr_lo),
+ le16_to_cpu(dma_desc->len),
+ le16_to_cpu(dma_desc->cmd));
+ else
+ DBG("%s: %p: DMA 0x%08x, LEN 0x%04x, Attr=0x%02x\n",
+ name, desc, le32_to_cpu(dma_desc->addr_lo),
+ le16_to_cpu(dma_desc->len),
+ le16_to_cpu(dma_desc->cmd));
- desc += 8;
+ desc += host->desc_sz;
- if (attr & 2)
+ if (dma_desc->cmd & cpu_to_le16(ADMA2_END))
break;
}
}
#else
-static void sdhci_show_adma_error(struct sdhci_host *host) { }
+static void sdhci_adma_show_error(struct sdhci_host *host) { }
#endif
static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
@@ -2370,7 +2413,7 @@
host->data->error = -EILSEQ;
else if (intmask & SDHCI_INT_ADMA_ERROR) {
pr_err("%s: ADMA error\n", mmc_hostname(host->mmc));
- sdhci_show_adma_error(host);
+ sdhci_adma_show_error(host);
host->data->error = -EIO;
if (host->ops->adma_workaround)
host->ops->adma_workaround(host, intmask);
@@ -2849,6 +2892,16 @@
host->flags &= ~SDHCI_USE_ADMA;
}
+ /*
+ * It is assumed that a 64-bit capable device has set a 64-bit DMA mask
+ * and *must* do 64-bit DMA. A driver has the opportunity to change
+ * that during the first call to ->enable_dma(). Similarly
+ * SDHCI_QUIRK2_BROKEN_64_BIT_DMA must be left to the drivers to
+ * implement.
+ */
+ if (sdhci_readl(host, SDHCI_CAPABILITIES) & SDHCI_CAN_64BIT)
+ host->flags |= SDHCI_USE_64_BIT_DMA;
+
if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
if (host->ops->enable_dma) {
if (host->ops->enable_dma(host)) {
@@ -2860,33 +2913,56 @@
}
}
+ /* SDMA does not support 64-bit DMA */
+ if (host->flags & SDHCI_USE_64_BIT_DMA)
+ host->flags &= ~SDHCI_USE_SDMA;
+
if (host->flags & SDHCI_USE_ADMA) {
/*
- * We need to allocate descriptors for all sg entries
- * (128) and potentially one alignment transfer for
- * each of those entries.
+ * The DMA descriptor table size is calculated as the maximum
+ * number of segments times 2, to allow for an alignment
+ * descriptor for each segment, plus 1 for a nop end descriptor,
+ * all multipled by the descriptor size.
*/
- host->adma_desc = dma_alloc_coherent(mmc_dev(mmc),
- ADMA_SIZE, &host->adma_addr,
- GFP_KERNEL);
- host->align_buffer = kmalloc(128 * 4, GFP_KERNEL);
- if (!host->adma_desc || !host->align_buffer) {
- dma_free_coherent(mmc_dev(mmc), ADMA_SIZE,
- host->adma_desc, host->adma_addr);
+ if (host->flags & SDHCI_USE_64_BIT_DMA) {
+ host->adma_table_sz = (SDHCI_MAX_SEGS * 2 + 1) *
+ SDHCI_ADMA2_64_DESC_SZ;
+ host->align_buffer_sz = SDHCI_MAX_SEGS *
+ SDHCI_ADMA2_64_ALIGN;
+ host->desc_sz = SDHCI_ADMA2_64_DESC_SZ;
+ host->align_sz = SDHCI_ADMA2_64_ALIGN;
+ host->align_mask = SDHCI_ADMA2_64_ALIGN - 1;
+ } else {
+ host->adma_table_sz = (SDHCI_MAX_SEGS * 2 + 1) *
+ SDHCI_ADMA2_32_DESC_SZ;
+ host->align_buffer_sz = SDHCI_MAX_SEGS *
+ SDHCI_ADMA2_32_ALIGN;
+ host->desc_sz = SDHCI_ADMA2_32_DESC_SZ;
+ host->align_sz = SDHCI_ADMA2_32_ALIGN;
+ host->align_mask = SDHCI_ADMA2_32_ALIGN - 1;
+ }
+ host->adma_table = dma_alloc_coherent(mmc_dev(mmc),
+ host->adma_table_sz,
+ &host->adma_addr,
+ GFP_KERNEL);
+ host->align_buffer = kmalloc(host->align_buffer_sz, GFP_KERNEL);
+ if (!host->adma_table || !host->align_buffer) {
+ dma_free_coherent(mmc_dev(mmc), host->adma_table_sz,
+ host->adma_table, host->adma_addr);
kfree(host->align_buffer);
pr_warn("%s: Unable to allocate ADMA buffers - falling back to standard DMA\n",
mmc_hostname(mmc));
host->flags &= ~SDHCI_USE_ADMA;
- host->adma_desc = NULL;
+ host->adma_table = NULL;
host->align_buffer = NULL;
- } else if (host->adma_addr & 3) {
+ } else if (host->adma_addr & host->align_mask) {
pr_warn("%s: unable to allocate aligned ADMA descriptor\n",
mmc_hostname(mmc));
host->flags &= ~SDHCI_USE_ADMA;
- dma_free_coherent(mmc_dev(mmc), ADMA_SIZE,
- host->adma_desc, host->adma_addr);
+ dma_free_coherent(mmc_dev(mmc), host->adma_table_sz,
+ host->adma_table, host->adma_addr);
kfree(host->align_buffer);
- host->adma_desc = NULL;
+ host->adma_table = NULL;
host->align_buffer = NULL;
}
}
@@ -3027,7 +3103,7 @@
if (ret) {
pr_warn("%s: Failed to enable vqmmc regulator: %d\n",
mmc_hostname(mmc), ret);
- mmc->supply.vqmmc = NULL;
+ mmc->supply.vqmmc = ERR_PTR(-EINVAL);
}
}
@@ -3046,16 +3122,21 @@
/* SD3.0: SDR104 is supported so (for eMMC) the caps2
* field can be promoted to support HS200.
*/
- if (!(host->quirks2 & SDHCI_QUIRK2_BROKEN_HS200)) {
+ if (!(host->quirks2 & SDHCI_QUIRK2_BROKEN_HS200))
mmc->caps2 |= MMC_CAP2_HS200;
- if (IS_ERR(mmc->supply.vqmmc) ||
- !regulator_is_supported_voltage
- (mmc->supply.vqmmc, 1100000, 1300000))
- mmc->caps2 &= ~MMC_CAP2_HS200_1_2V_SDR;
- }
} else if (caps[1] & SDHCI_SUPPORT_SDR50)
mmc->caps |= MMC_CAP_UHS_SDR50;
+ if (host->quirks2 & SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400 &&
+ (caps[1] & SDHCI_SUPPORT_HS400))
+ mmc->caps2 |= MMC_CAP2_HS400;
+
+ if ((mmc->caps2 & MMC_CAP2_HSX00_1_2V) &&
+ (IS_ERR(mmc->supply.vqmmc) ||
+ !regulator_is_supported_voltage(mmc->supply.vqmmc, 1100000,
+ 1300000)))
+ mmc->caps2 &= ~MMC_CAP2_HSX00_1_2V;
+
if ((caps[1] & SDHCI_SUPPORT_DDR50) &&
!(host->quirks2 & SDHCI_QUIRK2_BROKEN_DDR50))
mmc->caps |= MMC_CAP_UHS_DDR50;
@@ -3175,11 +3256,11 @@
* can do scatter/gather or not.
*/
if (host->flags & SDHCI_USE_ADMA)
- mmc->max_segs = 128;
+ mmc->max_segs = SDHCI_MAX_SEGS;
else if (host->flags & SDHCI_USE_SDMA)
mmc->max_segs = 1;
else /* PIO */
- mmc->max_segs = 128;
+ mmc->max_segs = SDHCI_MAX_SEGS;
/*
* Maximum number of sectors in one transfer. Limited by DMA boundary
@@ -3277,7 +3358,8 @@
pr_info("%s: SDHCI controller on %s [%s] using %s\n",
mmc_hostname(mmc), host->hw_name, dev_name(mmc_dev(mmc)),
- (host->flags & SDHCI_USE_ADMA) ? "ADMA" :
+ (host->flags & SDHCI_USE_ADMA) ?
+ (host->flags & SDHCI_USE_64_BIT_DMA) ? "ADMA 64-bit" : "ADMA" :
(host->flags & SDHCI_USE_SDMA) ? "DMA" : "PIO");
sdhci_enable_card_detection(host);
@@ -3339,18 +3421,15 @@
tasklet_kill(&host->finish_tasklet);
- if (!IS_ERR(mmc->supply.vmmc))
- regulator_disable(mmc->supply.vmmc);
-
if (!IS_ERR(mmc->supply.vqmmc))
regulator_disable(mmc->supply.vqmmc);
- if (host->adma_desc)
- dma_free_coherent(mmc_dev(mmc), ADMA_SIZE,
- host->adma_desc, host->adma_addr);
+ if (host->adma_table)
+ dma_free_coherent(mmc_dev(mmc), host->adma_table_sz,
+ host->adma_table, host->adma_addr);
kfree(host->align_buffer);
- host->adma_desc = NULL;
+ host->adma_table = NULL;
host->align_buffer = NULL;
}
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 31896a7..ddd31cd 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -161,7 +161,7 @@
#define SDHCI_CTRL_UHS_SDR50 0x0002
#define SDHCI_CTRL_UHS_SDR104 0x0003
#define SDHCI_CTRL_UHS_DDR50 0x0004
-#define SDHCI_CTRL_HS_SDR200 0x0005 /* reserved value in SDIO spec */
+#define SDHCI_CTRL_HS400 0x0005 /* Non-standard */
#define SDHCI_CTRL_VDD_180 0x0008
#define SDHCI_CTRL_DRV_TYPE_MASK 0x0030
#define SDHCI_CTRL_DRV_TYPE_B 0x0000
@@ -204,6 +204,7 @@
#define SDHCI_RETUNING_MODE_SHIFT 14
#define SDHCI_CLOCK_MUL_MASK 0x00FF0000
#define SDHCI_CLOCK_MUL_SHIFT 16
+#define SDHCI_SUPPORT_HS400 0x80000000 /* Non-standard */
#define SDHCI_CAPABILITIES_1 0x44
@@ -227,6 +228,7 @@
/* 55-57 reserved */
#define SDHCI_ADMA_ADDRESS 0x58
+#define SDHCI_ADMA_ADDRESS_HI 0x5C
/* 60-FB reserved */
@@ -235,6 +237,7 @@
#define SDHCI_PRESET_FOR_SDR50 0x6A
#define SDHCI_PRESET_FOR_SDR104 0x6C
#define SDHCI_PRESET_FOR_DDR50 0x6E
+#define SDHCI_PRESET_FOR_HS400 0x74 /* Non-standard */
#define SDHCI_PRESET_DRV_MASK 0xC000
#define SDHCI_PRESET_DRV_SHIFT 14
#define SDHCI_PRESET_CLKGEN_SEL_MASK 0x400
@@ -266,6 +269,46 @@
#define SDHCI_DEFAULT_BOUNDARY_SIZE (512 * 1024)
#define SDHCI_DEFAULT_BOUNDARY_ARG (ilog2(SDHCI_DEFAULT_BOUNDARY_SIZE) - 12)
+/* ADMA2 32-bit DMA descriptor size */
+#define SDHCI_ADMA2_32_DESC_SZ 8
+
+/* ADMA2 32-bit DMA alignment */
+#define SDHCI_ADMA2_32_ALIGN 4
+
+/* ADMA2 32-bit descriptor */
+struct sdhci_adma2_32_desc {
+ __le16 cmd;
+ __le16 len;
+ __le32 addr;
+} __packed __aligned(SDHCI_ADMA2_32_ALIGN);
+
+/* ADMA2 64-bit DMA descriptor size */
+#define SDHCI_ADMA2_64_DESC_SZ 12
+
+/* ADMA2 64-bit DMA alignment */
+#define SDHCI_ADMA2_64_ALIGN 8
+
+/*
+ * ADMA2 64-bit descriptor. Note 12-byte descriptor can't always be 8-byte
+ * aligned.
+ */
+struct sdhci_adma2_64_desc {
+ __le16 cmd;
+ __le16 len;
+ __le32 addr_lo;
+ __le32 addr_hi;
+} __packed __aligned(4);
+
+#define ADMA2_TRAN_VALID 0x21
+#define ADMA2_NOP_END_VALID 0x3
+#define ADMA2_END 0x2
+
+/*
+ * Maximum segments assuming a 512KiB maximum requisition size and a minimum
+ * 4KiB page size.
+ */
+#define SDHCI_MAX_SEGS 128
+
struct sdhci_ops {
#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
u32 (*read_l)(struct sdhci_host *host, int reg);
diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
index d1663b3..15cb8b7 100644
--- a/drivers/mmc/host/sunxi-mmc.c
+++ b/drivers/mmc/host/sunxi-mmc.c
@@ -21,7 +21,6 @@
#include <linux/err.h>
#include <linux/clk.h>
-#include <linux/clk-private.h>
#include <linux/clk/sunxi.h>
#include <linux/gpio.h>
diff --git a/drivers/mmc/host/toshsd.c b/drivers/mmc/host/toshsd.c
new file mode 100644
index 0000000..4666262
--- /dev/null
+++ b/drivers/mmc/host/toshsd.c
@@ -0,0 +1,717 @@
+/*
+ * Toshiba PCI Secure Digital Host Controller Interface driver
+ *
+ * Copyright (C) 2014 Ondrej Zary
+ * Copyright (C) 2007 Richard Betts, All Rights Reserved.
+ *
+ * Based on asic3_mmc.c, copyright (c) 2005 SDG Systems, LLC and,
+ * sdhci.c, copyright (C) 2005-2006 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/scatterlist.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/pm.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
+
+#include "toshsd.h"
+
+#define DRIVER_NAME "toshsd"
+
+static const struct pci_device_id pci_ids[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA, 0x0805) },
+ { /* end: all zeroes */ },
+};
+
+MODULE_DEVICE_TABLE(pci, pci_ids);
+
+static void toshsd_init(struct toshsd_host *host)
+{
+ /* enable clock */
+ pci_write_config_byte(host->pdev, SD_PCICFG_CLKSTOP,
+ SD_PCICFG_CLKSTOP_ENABLE_ALL);
+ pci_write_config_byte(host->pdev, SD_PCICFG_CARDDETECT, 2);
+
+ /* reset */
+ iowrite16(0, host->ioaddr + SD_SOFTWARERESET); /* assert */
+ mdelay(2);
+ iowrite16(1, host->ioaddr + SD_SOFTWARERESET); /* deassert */
+ mdelay(2);
+
+ /* Clear card registers */
+ iowrite16(0, host->ioaddr + SD_CARDCLOCKCTRL);
+ iowrite32(0, host->ioaddr + SD_CARDSTATUS);
+ iowrite32(0, host->ioaddr + SD_ERRORSTATUS0);
+ iowrite16(0, host->ioaddr + SD_STOPINTERNAL);
+
+ /* SDIO clock? */
+ iowrite16(0x100, host->ioaddr + SDIO_BASE + SDIO_CLOCKNWAITCTRL);
+
+ /* enable LED */
+ pci_write_config_byte(host->pdev, SD_PCICFG_SDLED_ENABLE1,
+ SD_PCICFG_LED_ENABLE1_START);
+ pci_write_config_byte(host->pdev, SD_PCICFG_SDLED_ENABLE2,
+ SD_PCICFG_LED_ENABLE2_START);
+
+ /* set interrupt masks */
+ iowrite32(~(u32)(SD_CARD_RESP_END | SD_CARD_RW_END
+ | SD_CARD_CARD_REMOVED_0 | SD_CARD_CARD_INSERTED_0
+ | SD_BUF_READ_ENABLE | SD_BUF_WRITE_ENABLE
+ | SD_BUF_CMD_TIMEOUT),
+ host->ioaddr + SD_INTMASKCARD);
+
+ iowrite16(0x1000, host->ioaddr + SD_TRANSACTIONCTRL);
+}
+
+/* Set MMC clock / power.
+ * Note: This controller uses a simple divider scheme therefore it cannot run
+ * SD/MMC cards at full speed (24/20MHz). HCLK (=33MHz PCI clock?) is too high
+ * and the next slowest is 16MHz (div=2).
+ */
+static void __toshsd_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct toshsd_host *host = mmc_priv(mmc);
+
+ if (ios->clock) {
+ u16 clk;
+ int div = 1;
+
+ while (ios->clock < HCLK / div)
+ div *= 2;
+
+ clk = div >> 2;
+
+ if (div == 1) { /* disable the divider */
+ pci_write_config_byte(host->pdev, SD_PCICFG_CLKMODE,
+ SD_PCICFG_CLKMODE_DIV_DISABLE);
+ clk |= SD_CARDCLK_DIV_DISABLE;
+ } else
+ pci_write_config_byte(host->pdev, SD_PCICFG_CLKMODE, 0);
+
+ clk |= SD_CARDCLK_ENABLE_CLOCK;
+ iowrite16(clk, host->ioaddr + SD_CARDCLOCKCTRL);
+
+ mdelay(10);
+ } else
+ iowrite16(0, host->ioaddr + SD_CARDCLOCKCTRL);
+
+ switch (ios->power_mode) {
+ case MMC_POWER_OFF:
+ pci_write_config_byte(host->pdev, SD_PCICFG_POWER1,
+ SD_PCICFG_PWR1_OFF);
+ mdelay(1);
+ break;
+ case MMC_POWER_UP:
+ break;
+ case MMC_POWER_ON:
+ pci_write_config_byte(host->pdev, SD_PCICFG_POWER1,
+ SD_PCICFG_PWR1_33V);
+ pci_write_config_byte(host->pdev, SD_PCICFG_POWER2,
+ SD_PCICFG_PWR2_AUTO);
+ mdelay(20);
+ break;
+ }
+
+ switch (ios->bus_width) {
+ case MMC_BUS_WIDTH_1:
+ iowrite16(SD_CARDOPT_REQUIRED | SD_CARDOPT_DATA_RESP_TIMEOUT(14)
+ | SD_CARDOPT_C2_MODULE_ABSENT
+ | SD_CARDOPT_DATA_XFR_WIDTH_1,
+ host->ioaddr + SD_CARDOPTIONSETUP);
+ break;
+ case MMC_BUS_WIDTH_4:
+ iowrite16(SD_CARDOPT_REQUIRED | SD_CARDOPT_DATA_RESP_TIMEOUT(14)
+ | SD_CARDOPT_C2_MODULE_ABSENT
+ | SD_CARDOPT_DATA_XFR_WIDTH_4,
+ host->ioaddr + SD_CARDOPTIONSETUP);
+ break;
+ }
+}
+
+static void toshsd_set_led(struct toshsd_host *host, unsigned char state)
+{
+ iowrite16(state, host->ioaddr + SDIO_BASE + SDIO_LEDCTRL);
+}
+
+static void toshsd_finish_request(struct toshsd_host *host)
+{
+ struct mmc_request *mrq = host->mrq;
+
+ /* Write something to end the command */
+ host->mrq = NULL;
+ host->cmd = NULL;
+ host->data = NULL;
+
+ toshsd_set_led(host, 0);
+ mmc_request_done(host->mmc, mrq);
+}
+
+static irqreturn_t toshsd_thread_irq(int irq, void *dev_id)
+{
+ struct toshsd_host *host = dev_id;
+ struct mmc_data *data = host->data;
+ struct sg_mapping_iter *sg_miter = &host->sg_miter;
+ unsigned short *buf;
+ int count;
+ unsigned long flags;
+
+ if (!data) {
+ dev_warn(&host->pdev->dev, "Spurious Data IRQ\n");
+ if (host->cmd) {
+ host->cmd->error = -EIO;
+ toshsd_finish_request(host);
+ }
+ return IRQ_NONE;
+ }
+ spin_lock_irqsave(&host->lock, flags);
+
+ if (!sg_miter_next(sg_miter))
+ return IRQ_HANDLED;
+ buf = sg_miter->addr;
+
+ /* Ensure we dont read more than one block. The chip will interrupt us
+ * When the next block is available.
+ */
+ count = sg_miter->length;
+ if (count > data->blksz)
+ count = data->blksz;
+
+ dev_dbg(&host->pdev->dev, "count: %08x, flags %08x\n", count,
+ data->flags);
+
+ /* Transfer the data */
+ if (data->flags & MMC_DATA_READ)
+ ioread32_rep(host->ioaddr + SD_DATAPORT, buf, count >> 2);
+ else
+ iowrite32_rep(host->ioaddr + SD_DATAPORT, buf, count >> 2);
+
+ sg_miter->consumed = count;
+ sg_miter_stop(sg_miter);
+
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ return IRQ_HANDLED;
+}
+
+static void toshsd_cmd_irq(struct toshsd_host *host)
+{
+ struct mmc_command *cmd = host->cmd;
+ u8 *buf;
+ u16 data;
+
+ if (!host->cmd) {
+ dev_warn(&host->pdev->dev, "Spurious CMD irq\n");
+ return;
+ }
+ buf = (u8 *)cmd->resp;
+ host->cmd = NULL;
+
+ if (cmd->flags & MMC_RSP_PRESENT && cmd->flags & MMC_RSP_136) {
+ /* R2 */
+ buf[12] = 0xff;
+ data = ioread16(host->ioaddr + SD_RESPONSE0);
+ buf[13] = data & 0xff;
+ buf[14] = data >> 8;
+ data = ioread16(host->ioaddr + SD_RESPONSE1);
+ buf[15] = data & 0xff;
+ buf[8] = data >> 8;
+ data = ioread16(host->ioaddr + SD_RESPONSE2);
+ buf[9] = data & 0xff;
+ buf[10] = data >> 8;
+ data = ioread16(host->ioaddr + SD_RESPONSE3);
+ buf[11] = data & 0xff;
+ buf[4] = data >> 8;
+ data = ioread16(host->ioaddr + SD_RESPONSE4);
+ buf[5] = data & 0xff;
+ buf[6] = data >> 8;
+ data = ioread16(host->ioaddr + SD_RESPONSE5);
+ buf[7] = data & 0xff;
+ buf[0] = data >> 8;
+ data = ioread16(host->ioaddr + SD_RESPONSE6);
+ buf[1] = data & 0xff;
+ buf[2] = data >> 8;
+ data = ioread16(host->ioaddr + SD_RESPONSE7);
+ buf[3] = data & 0xff;
+ } else if (cmd->flags & MMC_RSP_PRESENT) {
+ /* R1, R1B, R3, R6, R7 */
+ data = ioread16(host->ioaddr + SD_RESPONSE0);
+ buf[0] = data & 0xff;
+ buf[1] = data >> 8;
+ data = ioread16(host->ioaddr + SD_RESPONSE1);
+ buf[2] = data & 0xff;
+ buf[3] = data >> 8;
+ }
+
+ dev_dbg(&host->pdev->dev, "Command IRQ complete %d %d %x\n",
+ cmd->opcode, cmd->error, cmd->flags);
+
+ /* If there is data to handle we will
+ * finish the request in the mmc_data_end_irq handler.*/
+ if (host->data)
+ return;
+
+ toshsd_finish_request(host);
+}
+
+static void toshsd_data_end_irq(struct toshsd_host *host)
+{
+ struct mmc_data *data = host->data;
+
+ host->data = NULL;
+
+ if (!data) {
+ dev_warn(&host->pdev->dev, "Spurious data end IRQ\n");
+ return;
+ }
+
+ if (data->error == 0)
+ data->bytes_xfered = data->blocks * data->blksz;
+ else
+ data->bytes_xfered = 0;
+
+ dev_dbg(&host->pdev->dev, "Completed data request xfr=%d\n",
+ data->bytes_xfered);
+
+ iowrite16(0, host->ioaddr + SD_STOPINTERNAL);
+
+ toshsd_finish_request(host);
+}
+
+static irqreturn_t toshsd_irq(int irq, void *dev_id)
+{
+ struct toshsd_host *host = dev_id;
+ u32 int_reg, int_mask, int_status, detail;
+ int error = 0, ret = IRQ_HANDLED;
+
+ spin_lock(&host->lock);
+ int_status = ioread32(host->ioaddr + SD_CARDSTATUS);
+ int_mask = ioread32(host->ioaddr + SD_INTMASKCARD);
+ int_reg = int_status & ~int_mask & ~IRQ_DONT_CARE_BITS;
+
+ dev_dbg(&host->pdev->dev, "IRQ status:%x mask:%x\n",
+ int_status, int_mask);
+
+ /* nothing to do: it's not our IRQ */
+ if (!int_reg) {
+ ret = IRQ_NONE;
+ goto irq_end;
+ }
+
+ if (int_reg & SD_BUF_CMD_TIMEOUT) {
+ error = -ETIMEDOUT;
+ dev_dbg(&host->pdev->dev, "Timeout\n");
+ } else if (int_reg & SD_BUF_CRC_ERR) {
+ error = -EILSEQ;
+ dev_err(&host->pdev->dev, "BadCRC\n");
+ } else if (int_reg & (SD_BUF_ILLEGAL_ACCESS
+ | SD_BUF_CMD_INDEX_ERR
+ | SD_BUF_STOP_BIT_END_ERR
+ | SD_BUF_OVERFLOW
+ | SD_BUF_UNDERFLOW
+ | SD_BUF_DATA_TIMEOUT)) {
+ dev_err(&host->pdev->dev, "Buffer status error: { %s%s%s%s%s%s}\n",
+ int_reg & SD_BUF_ILLEGAL_ACCESS ? "ILLEGAL_ACC " : "",
+ int_reg & SD_BUF_CMD_INDEX_ERR ? "CMD_INDEX " : "",
+ int_reg & SD_BUF_STOP_BIT_END_ERR ? "STOPBIT_END " : "",
+ int_reg & SD_BUF_OVERFLOW ? "OVERFLOW " : "",
+ int_reg & SD_BUF_UNDERFLOW ? "UNDERFLOW " : "",
+ int_reg & SD_BUF_DATA_TIMEOUT ? "DATA_TIMEOUT " : "");
+
+ detail = ioread32(host->ioaddr + SD_ERRORSTATUS0);
+ dev_err(&host->pdev->dev, "detail error status { %s%s%s%s%s%s%s%s%s%s%s%s%s}\n",
+ detail & SD_ERR0_RESP_CMD_ERR ? "RESP_CMD " : "",
+ detail & SD_ERR0_RESP_NON_CMD12_END_BIT_ERR ? "RESP_END_BIT " : "",
+ detail & SD_ERR0_RESP_CMD12_END_BIT_ERR ? "RESP_END_BIT " : "",
+ detail & SD_ERR0_READ_DATA_END_BIT_ERR ? "READ_DATA_END_BIT " : "",
+ detail & SD_ERR0_WRITE_CRC_STATUS_END_BIT_ERR ? "WRITE_CMD_END_BIT " : "",
+ detail & SD_ERR0_RESP_NON_CMD12_CRC_ERR ? "RESP_CRC " : "",
+ detail & SD_ERR0_RESP_CMD12_CRC_ERR ? "RESP_CRC " : "",
+ detail & SD_ERR0_READ_DATA_CRC_ERR ? "READ_DATA_CRC " : "",
+ detail & SD_ERR0_WRITE_CMD_CRC_ERR ? "WRITE_CMD_CRC " : "",
+ detail & SD_ERR1_NO_CMD_RESP ? "NO_CMD_RESP " : "",
+ detail & SD_ERR1_TIMEOUT_READ_DATA ? "READ_DATA_TIMEOUT " : "",
+ detail & SD_ERR1_TIMEOUT_CRS_STATUS ? "CRS_STATUS_TIMEOUT " : "",
+ detail & SD_ERR1_TIMEOUT_CRC_BUSY ? "CRC_BUSY_TIMEOUT " : "");
+ error = -EIO;
+ }
+
+ if (error) {
+ if (host->cmd)
+ host->cmd->error = error;
+
+ if (error == -ETIMEDOUT) {
+ iowrite32(int_status &
+ ~(SD_BUF_CMD_TIMEOUT | SD_CARD_RESP_END),
+ host->ioaddr + SD_CARDSTATUS);
+ } else {
+ toshsd_init(host);
+ __toshsd_set_ios(host->mmc, &host->mmc->ios);
+ goto irq_end;
+ }
+ }
+
+ /* Card insert/remove. The mmc controlling code is stateless. */
+ if (int_reg & (SD_CARD_CARD_INSERTED_0 | SD_CARD_CARD_REMOVED_0)) {
+ iowrite32(int_status &
+ ~(SD_CARD_CARD_REMOVED_0 | SD_CARD_CARD_INSERTED_0),
+ host->ioaddr + SD_CARDSTATUS);
+
+ if (int_reg & SD_CARD_CARD_INSERTED_0)
+ toshsd_init(host);
+
+ mmc_detect_change(host->mmc, 1);
+ }
+
+ /* Data transfer */
+ if (int_reg & (SD_BUF_READ_ENABLE | SD_BUF_WRITE_ENABLE)) {
+ iowrite32(int_status &
+ ~(SD_BUF_WRITE_ENABLE | SD_BUF_READ_ENABLE),
+ host->ioaddr + SD_CARDSTATUS);
+
+ ret = IRQ_WAKE_THREAD;
+ goto irq_end;
+ }
+
+ /* Command completion */
+ if (int_reg & SD_CARD_RESP_END) {
+ iowrite32(int_status & ~(SD_CARD_RESP_END),
+ host->ioaddr + SD_CARDSTATUS);
+ toshsd_cmd_irq(host);
+ }
+
+ /* Data transfer completion */
+ if (int_reg & SD_CARD_RW_END) {
+ iowrite32(int_status & ~(SD_CARD_RW_END),
+ host->ioaddr + SD_CARDSTATUS);
+ toshsd_data_end_irq(host);
+ }
+irq_end:
+ spin_unlock(&host->lock);
+ return ret;
+}
+
+static void toshsd_start_cmd(struct toshsd_host *host, struct mmc_command *cmd)
+{
+ struct mmc_data *data = host->data;
+ int c = cmd->opcode;
+
+ dev_dbg(&host->pdev->dev, "Command opcode: %d\n", cmd->opcode);
+
+ if (cmd->opcode == MMC_STOP_TRANSMISSION) {
+ iowrite16(SD_STOPINT_ISSUE_CMD12,
+ host->ioaddr + SD_STOPINTERNAL);
+
+ cmd->resp[0] = cmd->opcode;
+ cmd->resp[1] = 0;
+ cmd->resp[2] = 0;
+ cmd->resp[3] = 0;
+
+ toshsd_finish_request(host);
+ return;
+ }
+
+ switch (mmc_resp_type(cmd)) {
+ case MMC_RSP_NONE:
+ c |= SD_CMD_RESP_TYPE_NONE;
+ break;
+
+ case MMC_RSP_R1:
+ c |= SD_CMD_RESP_TYPE_EXT_R1;
+ break;
+ case MMC_RSP_R1B:
+ c |= SD_CMD_RESP_TYPE_EXT_R1B;
+ break;
+ case MMC_RSP_R2:
+ c |= SD_CMD_RESP_TYPE_EXT_R2;
+ break;
+ case MMC_RSP_R3:
+ c |= SD_CMD_RESP_TYPE_EXT_R3;
+ break;
+
+ default:
+ dev_err(&host->pdev->dev, "Unknown response type %d\n",
+ mmc_resp_type(cmd));
+ break;
+ }
+
+ host->cmd = cmd;
+
+ if (cmd->opcode == MMC_APP_CMD)
+ c |= SD_CMD_TYPE_ACMD;
+
+ if (cmd->opcode == MMC_GO_IDLE_STATE)
+ c |= (3 << 8); /* removed from ipaq-asic3.h for some reason */
+
+ if (data) {
+ c |= SD_CMD_DATA_PRESENT;
+
+ if (data->blocks > 1) {
+ iowrite16(SD_STOPINT_AUTO_ISSUE_CMD12,
+ host->ioaddr + SD_STOPINTERNAL);
+ c |= SD_CMD_MULTI_BLOCK;
+ }
+
+ if (data->flags & MMC_DATA_READ)
+ c |= SD_CMD_TRANSFER_READ;
+
+ /* MMC_DATA_WRITE does not require a bit to be set */
+ }
+
+ /* Send the command */
+ iowrite32(cmd->arg, host->ioaddr + SD_ARG0);
+ iowrite16(c, host->ioaddr + SD_CMD);
+}
+
+static void toshsd_start_data(struct toshsd_host *host, struct mmc_data *data)
+{
+ unsigned int flags = SG_MITER_ATOMIC;
+
+ dev_dbg(&host->pdev->dev, "setup data transfer: blocksize %08x nr_blocks %d, offset: %08x\n",
+ data->blksz, data->blocks, data->sg->offset);
+
+ host->data = data;
+
+ if (data->flags & MMC_DATA_READ)
+ flags |= SG_MITER_TO_SG;
+ else
+ flags |= SG_MITER_FROM_SG;
+
+ sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
+
+ /* Set transfer length and blocksize */
+ iowrite16(data->blocks, host->ioaddr + SD_BLOCKCOUNT);
+ iowrite16(data->blksz, host->ioaddr + SD_CARDXFERDATALEN);
+}
+
+/* Process requests from the MMC layer */
+static void toshsd_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ struct toshsd_host *host = mmc_priv(mmc);
+ unsigned long flags;
+
+ /* abort if card not present */
+ if (!(ioread16(host->ioaddr + SD_CARDSTATUS) & SD_CARD_PRESENT_0)) {
+ mrq->cmd->error = -ENOMEDIUM;
+ mmc_request_done(mmc, mrq);
+ return;
+ }
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ WARN_ON(host->mrq != NULL);
+
+ host->mrq = mrq;
+
+ if (mrq->data)
+ toshsd_start_data(host, mrq->data);
+
+ toshsd_set_led(host, 1);
+
+ toshsd_start_cmd(host, mrq->cmd);
+
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static void toshsd_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct toshsd_host *host = mmc_priv(mmc);
+ unsigned long flags;
+
+ spin_lock_irqsave(&host->lock, flags);
+ __toshsd_set_ios(mmc, ios);
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static int toshsd_get_ro(struct mmc_host *mmc)
+{
+ struct toshsd_host *host = mmc_priv(mmc);
+
+ /* active low */
+ return !(ioread16(host->ioaddr + SD_CARDSTATUS) & SD_CARD_WRITE_PROTECT);
+}
+
+static int toshsd_get_cd(struct mmc_host *mmc)
+{
+ struct toshsd_host *host = mmc_priv(mmc);
+
+ return !!(ioread16(host->ioaddr + SD_CARDSTATUS) & SD_CARD_PRESENT_0);
+}
+
+static struct mmc_host_ops toshsd_ops = {
+ .request = toshsd_request,
+ .set_ios = toshsd_set_ios,
+ .get_ro = toshsd_get_ro,
+ .get_cd = toshsd_get_cd,
+};
+
+
+static void toshsd_powerdown(struct toshsd_host *host)
+{
+ /* mask all interrupts */
+ iowrite32(0xffffffff, host->ioaddr + SD_INTMASKCARD);
+ /* disable card clock */
+ iowrite16(0x000, host->ioaddr + SDIO_BASE + SDIO_CLOCKNWAITCTRL);
+ iowrite16(0, host->ioaddr + SD_CARDCLOCKCTRL);
+ /* power down card */
+ pci_write_config_byte(host->pdev, SD_PCICFG_POWER1, SD_PCICFG_PWR1_OFF);
+ /* disable clock */
+ pci_write_config_byte(host->pdev, SD_PCICFG_CLKSTOP, 0);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int toshsd_pm_suspend(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct toshsd_host *host = pci_get_drvdata(pdev);
+
+ toshsd_powerdown(host);
+
+ pci_save_state(pdev);
+ pci_enable_wake(pdev, PCI_D3hot, 0);
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, PCI_D3hot);
+
+ return 0;
+}
+
+static int toshsd_pm_resume(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct toshsd_host *host = pci_get_drvdata(pdev);
+ int ret;
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ ret = pci_enable_device(pdev);
+ if (ret)
+ return ret;
+
+ toshsd_init(host);
+
+ return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static int toshsd_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ int ret;
+ struct toshsd_host *host;
+ struct mmc_host *mmc;
+ resource_size_t base;
+
+ ret = pci_enable_device(pdev);
+ if (ret)
+ return ret;
+
+ mmc = mmc_alloc_host(sizeof(struct toshsd_host), &pdev->dev);
+ if (!mmc) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ host = mmc_priv(mmc);
+ host->mmc = mmc;
+
+ host->pdev = pdev;
+ pci_set_drvdata(pdev, host);
+
+ ret = pci_request_regions(pdev, DRIVER_NAME);
+ if (ret)
+ goto free;
+
+ host->ioaddr = pci_iomap(pdev, 0, 0);
+ if (!host->ioaddr) {
+ ret = -ENOMEM;
+ goto release;
+ }
+
+ /* Set MMC host parameters */
+ mmc->ops = &toshsd_ops;
+ mmc->caps = MMC_CAP_4_BIT_DATA;
+ mmc->ocr_avail = MMC_VDD_32_33;
+
+ mmc->f_min = HCLK / 512;
+ mmc->f_max = HCLK;
+
+ spin_lock_init(&host->lock);
+
+ toshsd_init(host);
+
+ ret = request_threaded_irq(pdev->irq, toshsd_irq, toshsd_thread_irq,
+ IRQF_SHARED, DRIVER_NAME, host);
+ if (ret)
+ goto unmap;
+
+ mmc_add_host(mmc);
+
+ base = pci_resource_start(pdev, 0);
+ dev_dbg(&pdev->dev, "MMIO %pa, IRQ %d\n", &base, pdev->irq);
+
+ pm_suspend_ignore_children(&pdev->dev, 1);
+
+ return 0;
+
+unmap:
+ pci_iounmap(pdev, host->ioaddr);
+release:
+ pci_release_regions(pdev);
+free:
+ mmc_free_host(mmc);
+ pci_set_drvdata(pdev, NULL);
+err:
+ pci_disable_device(pdev);
+ return ret;
+}
+
+static void toshsd_remove(struct pci_dev *pdev)
+{
+ struct toshsd_host *host = pci_get_drvdata(pdev);
+
+ mmc_remove_host(host->mmc);
+ toshsd_powerdown(host);
+ free_irq(pdev->irq, host);
+ pci_iounmap(pdev, host->ioaddr);
+ pci_release_regions(pdev);
+ mmc_free_host(host->mmc);
+ pci_set_drvdata(pdev, NULL);
+ pci_disable_device(pdev);
+}
+
+static const struct dev_pm_ops toshsd_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(toshsd_pm_suspend, toshsd_pm_resume)
+};
+
+static struct pci_driver toshsd_driver = {
+ .name = DRIVER_NAME,
+ .id_table = pci_ids,
+ .probe = toshsd_probe,
+ .remove = toshsd_remove,
+ .driver.pm = &toshsd_pm_ops,
+};
+
+static int __init toshsd_drv_init(void)
+{
+ return pci_register_driver(&toshsd_driver);
+}
+
+static void __exit toshsd_drv_exit(void)
+{
+ pci_unregister_driver(&toshsd_driver);
+}
+
+module_init(toshsd_drv_init);
+module_exit(toshsd_drv_exit);
+
+MODULE_AUTHOR("Ondrej Zary, Richard Betts");
+MODULE_DESCRIPTION("Toshiba PCI Secure Digital Host Controller Interface driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mmc/host/toshsd.h b/drivers/mmc/host/toshsd.h
new file mode 100644
index 0000000..b6c0d89
--- /dev/null
+++ b/drivers/mmc/host/toshsd.h
@@ -0,0 +1,176 @@
+/*
+ * Toshiba PCI Secure Digital Host Controller Interface driver
+ *
+ * Copyright (C) 2014 Ondrej Zary
+ * Copyright (C) 2007 Richard Betts, All Rights Reserved.
+ *
+ * Based on asic3_mmc.c Copyright (c) 2005 SDG Systems, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#define HCLK 33000000 /* 33 MHz (PCI clock) */
+
+#define SD_PCICFG_CLKSTOP 0x40 /* 0x1f = clock controller, 0 = stop */
+#define SD_PCICFG_GATEDCLK 0x41 /* Gated clock */
+#define SD_PCICFG_CLKMODE 0x42 /* Control clock of SD controller */
+#define SD_PCICFG_PINSTATUS 0x44 /* R/O: read status of SD pins */
+#define SD_PCICFG_POWER1 0x48
+#define SD_PCICFG_POWER2 0x49
+#define SD_PCICFG_POWER3 0x4a
+#define SD_PCICFG_CARDDETECT 0x4c
+#define SD_PCICFG_SLOTS 0x50 /* R/O: define support slot number */
+#define SD_PCICFG_EXTGATECLK1 0xf0 /* Could be used for gated clock */
+#define SD_PCICFG_EXTGATECLK2 0xf1 /* Could be used for gated clock */
+#define SD_PCICFG_EXTGATECLK3 0xf9 /* Bit 1: double buffer/single buffer */
+#define SD_PCICFG_SDLED_ENABLE1 0xfa
+#define SD_PCICFG_SDLED_ENABLE2 0xfe
+
+#define SD_PCICFG_CLKMODE_DIV_DISABLE BIT(0)
+#define SD_PCICFG_CLKSTOP_ENABLE_ALL 0x1f
+#define SD_PCICFG_LED_ENABLE1_START 0x12
+#define SD_PCICFG_LED_ENABLE2_START 0x80
+
+#define SD_PCICFG_PWR1_33V 0x08 /* Set for 3.3 volts */
+#define SD_PCICFG_PWR1_OFF 0x00 /* Turn off power */
+#define SD_PCICFG_PWR2_AUTO 0x02
+
+#define SD_CMD 0x00 /* also for SDIO */
+#define SD_ARG0 0x04 /* also for SDIO */
+#define SD_ARG1 0x06 /* also for SDIO */
+#define SD_STOPINTERNAL 0x08
+#define SD_BLOCKCOUNT 0x0a /* also for SDIO */
+#define SD_RESPONSE0 0x0c /* also for SDIO */
+#define SD_RESPONSE1 0x0e /* also for SDIO */
+#define SD_RESPONSE2 0x10 /* also for SDIO */
+#define SD_RESPONSE3 0x12 /* also for SDIO */
+#define SD_RESPONSE4 0x14 /* also for SDIO */
+#define SD_RESPONSE5 0x16 /* also for SDIO */
+#define SD_RESPONSE6 0x18 /* also for SDIO */
+#define SD_RESPONSE7 0x1a /* also for SDIO */
+#define SD_CARDSTATUS 0x1c /* also for SDIO */
+#define SD_BUFFERCTRL 0x1e /* also for SDIO */
+#define SD_INTMASKCARD 0x20 /* also for SDIO */
+#define SD_INTMASKBUFFER 0x22 /* also for SDIO */
+#define SD_CARDCLOCKCTRL 0x24
+#define SD_CARDXFERDATALEN 0x26 /* also for SDIO */
+#define SD_CARDOPTIONSETUP 0x28 /* also for SDIO */
+#define SD_ERRORSTATUS0 0x2c /* also for SDIO */
+#define SD_ERRORSTATUS1 0x2e /* also for SDIO */
+#define SD_DATAPORT 0x30 /* also for SDIO */
+#define SD_TRANSACTIONCTRL 0x34 /* also for SDIO */
+#define SD_SOFTWARERESET 0xe0 /* also for SDIO */
+
+/* registers above marked "also for SDIO" and all SDIO registers below can be
+ * accessed at SDIO_BASE + reg address */
+#define SDIO_BASE 0x100
+
+#define SDIO_CARDPORTSEL 0x02
+#define SDIO_CARDINTCTRL 0x36
+#define SDIO_CLOCKNWAITCTRL 0x38
+#define SDIO_HOSTINFORMATION 0x3a
+#define SDIO_ERRORCTRL 0x3c
+#define SDIO_LEDCTRL 0x3e
+
+#define SD_TRANSCTL_SET BIT(8)
+
+#define SD_CARDCLK_DIV_DISABLE BIT(15)
+#define SD_CARDCLK_ENABLE_CLOCK BIT(8)
+#define SD_CARDCLK_CLK_DIV_512 BIT(7)
+#define SD_CARDCLK_CLK_DIV_256 BIT(6)
+#define SD_CARDCLK_CLK_DIV_128 BIT(5)
+#define SD_CARDCLK_CLK_DIV_64 BIT(4)
+#define SD_CARDCLK_CLK_DIV_32 BIT(3)
+#define SD_CARDCLK_CLK_DIV_16 BIT(2)
+#define SD_CARDCLK_CLK_DIV_8 BIT(1)
+#define SD_CARDCLK_CLK_DIV_4 BIT(0)
+#define SD_CARDCLK_CLK_DIV_2 0
+
+#define SD_CARDOPT_REQUIRED 0x000e
+#define SD_CARDOPT_DATA_RESP_TIMEOUT(x) (((x) & 0x0f) << 4) /* 4 bits */
+#define SD_CARDOPT_C2_MODULE_ABSENT BIT(14)
+#define SD_CARDOPT_DATA_XFR_WIDTH_1 (1 << 15)
+#define SD_CARDOPT_DATA_XFR_WIDTH_4 (0 << 15)
+
+#define SD_CMD_TYPE_CMD (0 << 6)
+#define SD_CMD_TYPE_ACMD (1 << 6)
+#define SD_CMD_TYPE_AUTHEN (2 << 6)
+#define SD_CMD_RESP_TYPE_NONE (3 << 8)
+#define SD_CMD_RESP_TYPE_EXT_R1 (4 << 8)
+#define SD_CMD_RESP_TYPE_EXT_R1B (5 << 8)
+#define SD_CMD_RESP_TYPE_EXT_R2 (6 << 8)
+#define SD_CMD_RESP_TYPE_EXT_R3 (7 << 8)
+#define SD_CMD_RESP_TYPE_EXT_R6 (4 << 8)
+#define SD_CMD_RESP_TYPE_EXT_R7 (4 << 8)
+#define SD_CMD_DATA_PRESENT BIT(11)
+#define SD_CMD_TRANSFER_READ BIT(12)
+#define SD_CMD_MULTI_BLOCK BIT(13)
+#define SD_CMD_SECURITY_CMD BIT(14)
+
+#define SD_STOPINT_ISSUE_CMD12 BIT(0)
+#define SD_STOPINT_AUTO_ISSUE_CMD12 BIT(8)
+
+#define SD_CARD_RESP_END BIT(0)
+#define SD_CARD_RW_END BIT(2)
+#define SD_CARD_CARD_REMOVED_0 BIT(3)
+#define SD_CARD_CARD_INSERTED_0 BIT(4)
+#define SD_CARD_PRESENT_0 BIT(5)
+#define SD_CARD_UNK6 BIT(6)
+#define SD_CARD_WRITE_PROTECT BIT(7)
+#define SD_CARD_CARD_REMOVED_3 BIT(8)
+#define SD_CARD_CARD_INSERTED_3 BIT(9)
+#define SD_CARD_PRESENT_3 BIT(10)
+
+#define SD_BUF_CMD_INDEX_ERR BIT(16)
+#define SD_BUF_CRC_ERR BIT(17)
+#define SD_BUF_STOP_BIT_END_ERR BIT(18)
+#define SD_BUF_DATA_TIMEOUT BIT(19)
+#define SD_BUF_OVERFLOW BIT(20)
+#define SD_BUF_UNDERFLOW BIT(21)
+#define SD_BUF_CMD_TIMEOUT BIT(22)
+#define SD_BUF_UNK7 BIT(23)
+#define SD_BUF_READ_ENABLE BIT(24)
+#define SD_BUF_WRITE_ENABLE BIT(25)
+#define SD_BUF_ILLEGAL_FUNCTION BIT(29)
+#define SD_BUF_CMD_BUSY BIT(30)
+#define SD_BUF_ILLEGAL_ACCESS BIT(31)
+
+#define SD_ERR0_RESP_CMD_ERR BIT(0)
+#define SD_ERR0_RESP_NON_CMD12_END_BIT_ERR BIT(2)
+#define SD_ERR0_RESP_CMD12_END_BIT_ERR BIT(3)
+#define SD_ERR0_READ_DATA_END_BIT_ERR BIT(4)
+#define SD_ERR0_WRITE_CRC_STATUS_END_BIT_ERR BIT(5)
+#define SD_ERR0_RESP_NON_CMD12_CRC_ERR BIT(8)
+#define SD_ERR0_RESP_CMD12_CRC_ERR BIT(9)
+#define SD_ERR0_READ_DATA_CRC_ERR BIT(10)
+#define SD_ERR0_WRITE_CMD_CRC_ERR BIT(11)
+
+#define SD_ERR1_NO_CMD_RESP BIT(16)
+#define SD_ERR1_TIMEOUT_READ_DATA BIT(20)
+#define SD_ERR1_TIMEOUT_CRS_STATUS BIT(21)
+#define SD_ERR1_TIMEOUT_CRC_BUSY BIT(22)
+
+#define IRQ_DONT_CARE_BITS (SD_CARD_PRESENT_3 \
+ | SD_CARD_WRITE_PROTECT \
+ | SD_CARD_UNK6 \
+ | SD_CARD_PRESENT_0 \
+ | SD_BUF_UNK7 \
+ | SD_BUF_CMD_BUSY)
+
+struct toshsd_host {
+ struct pci_dev *pdev;
+ struct mmc_host *mmc;
+
+ spinlock_t lock;
+
+ struct mmc_request *mrq;/* Current request */
+ struct mmc_command *cmd;/* Current command */
+ struct mmc_data *data; /* Current data request */
+
+ struct sg_mapping_iter sg_miter; /* for PIO */
+
+ void __iomem *ioaddr; /* mapped address */
+};
diff --git a/include/linux/atmel-mci.h b/include/linux/atmel-mci.h
index 91b77f8..9177947 100644
--- a/include/linux/atmel-mci.h
+++ b/include/linux/atmel-mci.h
@@ -11,6 +11,7 @@
* @detect_pin: GPIO pin wired to the card detect switch
* @wp_pin: GPIO pin wired to the write protect sensor
* @detect_is_active_high: The state of the detect pin when it is active
+ * @non_removable: The slot is not removable, only detect once
*
* If a given slot is not present on the board, @bus_width should be
* set to 0. The other fields are ignored in this case.
@@ -26,6 +27,7 @@
int detect_pin;
int wp_pin;
bool detect_is_active_high;
+ bool non_removable;
};
/**
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index b0692d2..4d69c00 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -88,6 +88,9 @@
unsigned int data_tag_unit_size; /* DATA TAG UNIT size */
unsigned int boot_ro_lock; /* ro lock support */
bool boot_ro_lockable;
+ bool ffu_capable; /* Firmware upgrade support */
+#define MMC_FIRMWARE_LEN 8
+ u8 fwrev[MMC_FIRMWARE_LEN]; /* FW version */
u8 raw_exception_status; /* 54 */
u8 raw_partition_support; /* 160 */
u8 raw_rpmb_size_mult; /* 168 */
@@ -509,24 +512,8 @@
#define mmc_dev_to_card(d) container_of(d, struct mmc_card, dev)
-#define mmc_list_to_card(l) container_of(l, struct mmc_card, node)
-#define mmc_get_drvdata(c) dev_get_drvdata(&(c)->dev)
-#define mmc_set_drvdata(c,d) dev_set_drvdata(&(c)->dev, d)
-
-/*
- * MMC device driver (e.g., Flash card, I/O card...)
- */
-struct mmc_driver {
- struct device_driver drv;
- int (*probe)(struct mmc_card *);
- void (*remove)(struct mmc_card *);
- int (*suspend)(struct mmc_card *);
- int (*resume)(struct mmc_card *);
- void (*shutdown)(struct mmc_card *);
-};
-
-extern int mmc_register_driver(struct mmc_driver *);
-extern void mmc_unregister_driver(struct mmc_driver *);
+extern int mmc_register_driver(struct device_driver *);
+extern void mmc_unregister_driver(struct device_driver *);
extern void mmc_fixup_device(struct mmc_card *card,
const struct mmc_fixup *table);
diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h
index f206e29..cb2b040 100644
--- a/include/linux/mmc/core.h
+++ b/include/linux/mmc/core.h
@@ -154,7 +154,8 @@
extern int __mmc_switch(struct mmc_card *, u8, u8, u8, unsigned int, bool,
bool, bool);
extern int mmc_switch(struct mmc_card *, u8, u8, u8, unsigned int);
-extern int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd);
+extern int mmc_send_tuning(struct mmc_host *host);
+extern int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd);
#define MMC_ERASE_ARG 0x00000000
#define MMC_SECURE_ERASE_ARG 0x80000000
diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
index 0013669..42b724e 100644
--- a/include/linux/mmc/dw_mmc.h
+++ b/include/linux/mmc/dw_mmc.h
@@ -54,6 +54,7 @@
* transfer is in progress.
* @use_dma: Whether DMA channel is initialized or not.
* @using_dma: Whether DMA is in use for the current transfer.
+ * @dma_64bit_address: Whether DMA supports 64-bit address mode or not.
* @sg_dma: Bus address of DMA buffer.
* @sg_cpu: Virtual address of DMA buffer.
* @dma_ops: Pointer to platform-specific DMA callbacks.
@@ -96,6 +97,7 @@
* @quirks: Set of quirks that apply to specific versions of the IP.
* @irq_flags: The flags to be passed to request_irq.
* @irq: The irq value to be passed to request_irq.
+ * @sdio_id0: Number of slot0 in the SDIO interrupt registers.
*
* Locking
* =======
@@ -135,11 +137,11 @@
struct mmc_command stop_abort;
unsigned int prev_blksz;
unsigned char timing;
- struct workqueue_struct *card_workqueue;
/* DMA interface members*/
int use_dma;
int using_dma;
+ int dma_64bit_address;
dma_addr_t sg_dma;
void *sg_cpu;
@@ -154,7 +156,6 @@
u32 stop_cmdr;
u32 dir_status;
struct tasklet_struct tasklet;
- struct work_struct card_work;
unsigned long pending_events;
unsigned long completed_events;
enum dw_mci_state state;
@@ -193,6 +194,8 @@
bool vqmmc_enabled;
unsigned long irq_flags; /* IRQ flags */
int irq;
+
+ int sdio_id0;
};
/* DMA ops for Internal/External DMAC interface */
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index df0c153..9f32270 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -289,6 +289,7 @@
#define MMC_CAP2_HS400_1_2V (1 << 16) /* Can support HS400 1.2V */
#define MMC_CAP2_HS400 (MMC_CAP2_HS400_1_8V | \
MMC_CAP2_HS400_1_2V)
+#define MMC_CAP2_HSX00_1_2V (MMC_CAP2_HS200_1_2V_SDR | MMC_CAP2_HS400_1_2V)
#define MMC_CAP2_SDIO_IRQ_NOTHREAD (1 << 17)
mmc_pm_flag_t pm_caps; /* supported pm features */
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
index 1cd00b3..49ad7a9 100644
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -296,6 +296,7 @@
#define EXT_CSD_SANITIZE_START 165 /* W */
#define EXT_CSD_WR_REL_PARAM 166 /* RO */
#define EXT_CSD_RPMB_MULT 168 /* RO */
+#define EXT_CSD_FW_CONFIG 169 /* R/W */
#define EXT_CSD_BOOT_WP 173 /* R/W */
#define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */
#define EXT_CSD_PART_CONFIG 179 /* R/W */
@@ -332,6 +333,8 @@
#define EXT_CSD_GENERIC_CMD6_TIME 248 /* RO */
#define EXT_CSD_CACHE_SIZE 249 /* RO, 4 bytes */
#define EXT_CSD_PWR_CL_DDR_200_360 253 /* RO */
+#define EXT_CSD_FIRMWARE_VERSION 254 /* RO, 8 bytes */
+#define EXT_CSD_SUPPORTED_MODE 493 /* RO */
#define EXT_CSD_TAG_UNIT_SIZE 498 /* RO */
#define EXT_CSD_DATA_TAG_SUPPORT 499 /* RO */
#define EXT_CSD_MAX_PACKED_WRITES 500 /* RO */
diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
index dba793e..375af80 100644
--- a/include/linux/mmc/sdhci.h
+++ b/include/linux/mmc/sdhci.h
@@ -100,6 +100,12 @@
#define SDHCI_QUIRK2_BROKEN_DDR50 (1<<7)
/* Stop command (CMD12) can set Transfer Complete when not using MMC_RSP_BUSY */
#define SDHCI_QUIRK2_STOP_WITH_TC (1<<8)
+/* Controller does not support 64-bit DMA */
+#define SDHCI_QUIRK2_BROKEN_64_BIT_DMA (1<<9)
+/* need clear transfer mode register before send cmd */
+#define SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD (1<<10)
+/* Capability register bit-63 indicates HS400 support */
+#define SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400 (1<<11)
int irq; /* Device IRQ */
void __iomem *ioaddr; /* Mapped address */
@@ -130,6 +136,7 @@
#define SDHCI_SDIO_IRQ_ENABLED (1<<9) /* SDIO irq enabled */
#define SDHCI_SDR104_NEEDS_TUNING (1<<10) /* SDR104/HS200 needs tuning */
#define SDHCI_USING_RETUNING_TIMER (1<<11) /* Host is using a retuning timer for the card */
+#define SDHCI_USE_64_BIT_DMA (1<<12) /* Use 64-bit DMA */
unsigned int version; /* SDHCI spec. version */
@@ -155,12 +162,19 @@
int sg_count; /* Mapped sg entries */
- u8 *adma_desc; /* ADMA descriptor table */
- u8 *align_buffer; /* Bounce buffer */
+ void *adma_table; /* ADMA descriptor table */
+ void *align_buffer; /* Bounce buffer */
+
+ size_t adma_table_sz; /* ADMA descriptor table size */
+ size_t align_buffer_sz; /* Bounce buffer size */
dma_addr_t adma_addr; /* Mapped ADMA descr. table */
dma_addr_t align_addr; /* Mapped bounce buffer */
+ unsigned int desc_sz; /* ADMA descriptor size */
+ unsigned int align_sz; /* ADMA alignment */
+ unsigned int align_mask; /* ADMA alignment mask */
+
struct tasklet_struct finish_tasklet; /* Tasklet structures */
struct timer_list timer; /* Timer for timeouts */
diff --git a/include/linux/mmc/sdio_func.h b/include/linux/mmc/sdio_func.h
index 50f0bc9..aab032a 100644
--- a/include/linux/mmc/sdio_func.h
+++ b/include/linux/mmc/sdio_func.h
@@ -84,8 +84,6 @@
struct device_driver drv;
};
-#define to_sdio_driver(d) container_of(d, struct sdio_driver, drv)
-
/**
* SDIO_DEVICE - macro used to describe a specific SDIO device
* @vend: the 16 bit manufacturer code
diff --git a/include/linux/platform_data/hsmmc-omap.h b/include/linux/platform_data/hsmmc-omap.h
new file mode 100644
index 0000000..67bbcf0
--- /dev/null
+++ b/include/linux/platform_data/hsmmc-omap.h
@@ -0,0 +1,90 @@
+/*
+ * MMC definitions for OMAP2
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * struct omap_hsmmc_dev_attr.flags possibilities
+ *
+ * OMAP_HSMMC_SUPPORTS_DUAL_VOLT: Some HSMMC controller instances can
+ * operate with either 1.8Vdc or 3.0Vdc card voltages; this flag
+ * should be set if this is the case. See for example Section 22.5.3
+ * "MMC/SD/SDIO1 Bus Voltage Selection" of the OMAP34xx Multimedia
+ * Device Silicon Revision 3.1.x Revision ZR (July 2011) (SWPU223R).
+ *
+ * OMAP_HSMMC_BROKEN_MULTIBLOCK_READ: Multiple-block read transfers
+ * don't work correctly on some MMC controller instances on some
+ * OMAP3 SoCs; this flag should be set if this is the case. See
+ * for example Advisory 2.1.1.128 "MMC: Multiple Block Read
+ * Operation Issue" in _OMAP3530/3525/3515/3503 Silicon Errata_
+ * Revision F (October 2010) (SPRZ278F).
+ */
+#define OMAP_HSMMC_SUPPORTS_DUAL_VOLT BIT(0)
+#define OMAP_HSMMC_BROKEN_MULTIBLOCK_READ BIT(1)
+#define OMAP_HSMMC_SWAKEUP_MISSING BIT(2)
+
+struct omap_hsmmc_dev_attr {
+ u8 flags;
+};
+
+struct mmc_card;
+
+struct omap_hsmmc_platform_data {
+ /* back-link to device */
+ struct device *dev;
+
+ /* set if your board has components or wiring that limits the
+ * maximum frequency on the MMC bus */
+ unsigned int max_freq;
+
+ /* Integrating attributes from the omap_hwmod layer */
+ u8 controller_flags;
+
+ /* Register offset deviation */
+ u16 reg_offset;
+
+ /*
+ * 4/8 wires and any additional host capabilities
+ * need to OR'd all capabilities (ref. linux/mmc/host.h)
+ */
+ u32 caps; /* Used for the MMC driver on 2430 and later */
+ u32 pm_caps; /* PM capabilities of the mmc */
+
+ /* switch pin can be for card detect (default) or card cover */
+ unsigned cover:1;
+
+ /* use the internal clock */
+ unsigned internal_clock:1;
+
+ /* nonremovable e.g. eMMC */
+ unsigned nonremovable:1;
+
+ /* eMMC does not handle power off when not in sleep state */
+ unsigned no_regulator_off_init:1;
+
+ /* we can put the features above into this variable */
+#define HSMMC_HAS_PBIAS (1 << 0)
+#define HSMMC_HAS_UPDATED_RESET (1 << 1)
+#define HSMMC_HAS_HSPE_SUPPORT (1 << 2)
+ unsigned features;
+
+ int switch_pin; /* gpio (card detect) */
+ int gpio_wp; /* gpio (write protect) */
+
+ int (*set_power)(struct device *dev, int power_on, int vdd);
+ void (*remux)(struct device *dev, int power_on);
+ /* Call back before enabling / disabling regulators */
+ void (*before_set_reg)(struct device *dev, int power_on, int vdd);
+ /* Call back after enabling / disabling regulators */
+ void (*after_set_reg)(struct device *dev, int power_on, int vdd);
+ /* if we have special card, init it using this callback */
+ void (*init_card)(struct mmc_card *card);
+
+ const char *name;
+ u32 ocr_mask;
+};
diff --git a/include/linux/platform_data/mmc-atmel-mci.h b/include/linux/platform_data/mmc-atmel-mci.h
new file mode 100644
index 0000000..399a2d5
--- /dev/null
+++ b/include/linux/platform_data/mmc-atmel-mci.h
@@ -0,0 +1,22 @@
+#ifndef __MMC_ATMEL_MCI_H
+#define __MMC_ATMEL_MCI_H
+
+#include <linux/platform_data/dma-atmel.h>
+#include <linux/platform_data/dma-dw.h>
+
+/**
+ * struct mci_dma_data - DMA data for MCI interface
+ */
+struct mci_dma_data {
+#ifdef CONFIG_ARM
+ struct at_dma_slave sdata;
+#else
+ struct dw_dma_slave sdata;
+#endif
+};
+
+/* accessor macros */
+#define slave_data_ptr(s) (&(s)->sdata)
+#define find_slave_dev(s) ((s)->sdata.dma_dev)
+
+#endif /* __MMC_ATMEL_MCI_H */
diff --git a/include/linux/platform_data/mmc-omap.h b/include/linux/platform_data/mmc-omap.h
index 51e70cf..5c188f4 100644
--- a/include/linux/platform_data/mmc-omap.h
+++ b/include/linux/platform_data/mmc-omap.h
@@ -10,32 +10,8 @@
#define OMAP_MMC_MAX_SLOTS 2
-/*
- * struct omap_mmc_dev_attr.flags possibilities
- *
- * OMAP_HSMMC_SUPPORTS_DUAL_VOLT: Some HSMMC controller instances can
- * operate with either 1.8Vdc or 3.0Vdc card voltages; this flag
- * should be set if this is the case. See for example Section 22.5.3
- * "MMC/SD/SDIO1 Bus Voltage Selection" of the OMAP34xx Multimedia
- * Device Silicon Revision 3.1.x Revision ZR (July 2011) (SWPU223R).
- *
- * OMAP_HSMMC_BROKEN_MULTIBLOCK_READ: Multiple-block read transfers
- * don't work correctly on some MMC controller instances on some
- * OMAP3 SoCs; this flag should be set if this is the case. See
- * for example Advisory 2.1.1.128 "MMC: Multiple Block Read
- * Operation Issue" in _OMAP3530/3525/3515/3503 Silicon Errata_
- * Revision F (October 2010) (SPRZ278F).
- */
-#define OMAP_HSMMC_SUPPORTS_DUAL_VOLT BIT(0)
-#define OMAP_HSMMC_BROKEN_MULTIBLOCK_READ BIT(1)
-#define OMAP_HSMMC_SWAKEUP_MISSING BIT(2)
-
struct mmc_card;
-struct omap_mmc_dev_attr {
- u8 flags;
-};
-
struct omap_mmc_platform_data {
/* back-link to device */
struct device *dev;
@@ -106,9 +82,6 @@
unsigned vcc_aux_disable_is_sleep:1;
/* we can put the features above into this variable */
-#define HSMMC_HAS_PBIAS (1 << 0)
-#define HSMMC_HAS_UPDATED_RESET (1 << 1)
-#define HSMMC_HAS_HSPE_SUPPORT (1 << 2)
#define MMC_OMAP7XX (1 << 3)
#define MMC_OMAP15XX (1 << 4)
#define MMC_OMAP16XX (1 << 5)
diff --git a/include/linux/platform_data/pxa_sdhci.h b/include/linux/platform_data/pxa_sdhci.h
index 27d3156..9e20c2f 100644
--- a/include/linux/platform_data/pxa_sdhci.h
+++ b/include/linux/platform_data/pxa_sdhci.h
@@ -55,9 +55,4 @@
unsigned int quirks2;
unsigned int pm_caps;
};
-
-struct sdhci_pxa {
- u8 clk_enable;
- u8 power_mode;
-};
#endif /* _PXA_SDHCI_H_ */