[SCSI] aacraid: don't assign cpu_to_le32(int) to u8
On Wed, Nov 07, 2007 at 01:51:44PM -0500, Salyzyn, Mark wrote:
> Christoph Hellwig [mailto:hch@infradead.org] sez:
> > Did anyone run the driver through sparse to see if we have
> > more issues like this?
>
> There are some warnings from sparse, none like this one. I will deal
> with the warnings ...
Actually there are a lot of endianess warnings, fortunately most of them
harmless. The patch below fixes all of them up (including the ones in
the patch I replied to), except for aac_init_adapter which is really odd
and I don't know what to do.
[jejb fixed up rejections and checkpatch issues]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mark Salyzyn <mark_salyzyn@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index cb9a92f..310fd80b 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -796,13 +796,13 @@
*/
switch (le32_to_cpu(aifcmd->command)) {
case AifCmdDriverNotify:
- switch (le32_to_cpu(((u32 *)aifcmd->data)[0])) {
+ switch (le32_to_cpu(((__le32 *)aifcmd->data)[0])) {
/*
* Morph or Expand complete
*/
case AifDenMorphComplete:
case AifDenVolumeExtendComplete:
- container = le32_to_cpu(((u32 *)aifcmd->data)[1]);
+ container = le32_to_cpu(((__le32 *)aifcmd->data)[1]);
if (container >= dev->maximum_num_containers)
break;
@@ -835,25 +835,25 @@
if (container >= dev->maximum_num_containers)
break;
if ((dev->fsa_dev[container].config_waiting_on ==
- le32_to_cpu(*(u32 *)aifcmd->data)) &&
+ le32_to_cpu(*(__le32 *)aifcmd->data)) &&
time_before(jiffies, dev->fsa_dev[container].config_waiting_stamp + AIF_SNIFF_TIMEOUT))
dev->fsa_dev[container].config_waiting_on = 0;
} else for (container = 0;
container < dev->maximum_num_containers; ++container) {
if ((dev->fsa_dev[container].config_waiting_on ==
- le32_to_cpu(*(u32 *)aifcmd->data)) &&
+ le32_to_cpu(*(__le32 *)aifcmd->data)) &&
time_before(jiffies, dev->fsa_dev[container].config_waiting_stamp + AIF_SNIFF_TIMEOUT))
dev->fsa_dev[container].config_waiting_on = 0;
}
break;
case AifCmdEventNotify:
- switch (le32_to_cpu(((u32 *)aifcmd->data)[0])) {
+ switch (le32_to_cpu(((__le32 *)aifcmd->data)[0])) {
/*
* Add an Array.
*/
case AifEnAddContainer:
- container = le32_to_cpu(((u32 *)aifcmd->data)[1]);
+ container = le32_to_cpu(((__le32 *)aifcmd->data)[1]);
if (container >= dev->maximum_num_containers)
break;
dev->fsa_dev[container].config_needed = ADD;
@@ -866,7 +866,7 @@
* Delete an Array.
*/
case AifEnDeleteContainer:
- container = le32_to_cpu(((u32 *)aifcmd->data)[1]);
+ container = le32_to_cpu(((__le32 *)aifcmd->data)[1]);
if (container >= dev->maximum_num_containers)
break;
dev->fsa_dev[container].config_needed = DELETE;
@@ -880,7 +880,7 @@
* waiting on something else, setup to wait on a Config Change.
*/
case AifEnContainerChange:
- container = le32_to_cpu(((u32 *)aifcmd->data)[1]);
+ container = le32_to_cpu(((__le32 *)aifcmd->data)[1]);
if (container >= dev->maximum_num_containers)
break;
if (dev->fsa_dev[container].config_waiting_on &&
@@ -905,13 +905,13 @@
if (container >= dev->maximum_num_containers)
break;
if ((dev->fsa_dev[container].config_waiting_on ==
- le32_to_cpu(*(u32 *)aifcmd->data)) &&
+ le32_to_cpu(*(__le32 *)aifcmd->data)) &&
time_before(jiffies, dev->fsa_dev[container].config_waiting_stamp + AIF_SNIFF_TIMEOUT))
dev->fsa_dev[container].config_waiting_on = 0;
} else for (container = 0;
container < dev->maximum_num_containers; ++container) {
if ((dev->fsa_dev[container].config_waiting_on ==
- le32_to_cpu(*(u32 *)aifcmd->data)) &&
+ le32_to_cpu(*(__le32 *)aifcmd->data)) &&
time_before(jiffies, dev->fsa_dev[container].config_waiting_stamp + AIF_SNIFF_TIMEOUT))
dev->fsa_dev[container].config_waiting_on = 0;
}
@@ -926,9 +926,9 @@
* wait for a container change.
*/
- if ((((u32 *)aifcmd->data)[1] == cpu_to_le32(AifJobCtrZero))
- && ((((u32 *)aifcmd->data)[6] == ((u32 *)aifcmd->data)[5])
- || (((u32 *)aifcmd->data)[4] == cpu_to_le32(AifJobStsSuccess)))) {
+ if (((__le32 *)aifcmd->data)[1] == cpu_to_le32(AifJobCtrZero) &&
+ (((__le32 *)aifcmd->data)[6] == ((__le32 *)aifcmd->data)[5] ||
+ ((__le32 *)aifcmd->data)[4] == cpu_to_le32(AifJobStsSuccess))) {
for (container = 0;
container < dev->maximum_num_containers;
++container) {
@@ -943,9 +943,9 @@
jiffies;
}
}
- if ((((u32 *)aifcmd->data)[1] == cpu_to_le32(AifJobCtrZero))
- && (((u32 *)aifcmd->data)[6] == 0)
- && (((u32 *)aifcmd->data)[4] == cpu_to_le32(AifJobStsRunning))) {
+ if (((__le32 *)aifcmd->data)[1] == cpu_to_le32(AifJobCtrZero) &&
+ ((__le32 *)aifcmd->data)[6] == 0 &&
+ ((__le32 *)aifcmd->data)[4] == cpu_to_le32(AifJobStsRunning)) {
for (container = 0;
container < dev->maximum_num_containers;
++container) {
@@ -1373,9 +1373,10 @@
printk(KERN_ERR "%s: Host adapter BLINK LED 0x%x\n", aac->name, BlinkLED);
- if (!aac_check_reset || ((aac_check_reset != 1) &&
- (aac->supplement_adapter_info.SupportedOptions2 &
- le32_to_cpu(AAC_OPTION_IGNORE_RESET))))
+ if (!aac_check_reset ||
+ ((aac_check_reset != 1) &&
+ (aac->supplement_adapter_info.SupportedOptions2 &
+ cpu_to_le32(AAC_OPTION_IGNORE_RESET))))
goto out;
host = aac->scsi_host_ptr;
if (aac->thread->pid != current->pid)
@@ -1656,11 +1657,11 @@
struct fib *fibptr;
if ((fibptr = aac_fib_alloc(dev))) {
- u32 * info;
+ __le32 *info;
aac_fib_init(fibptr);
- info = (u32 *) fib_data(fibptr);
+ info = (__le32 *) fib_data(fibptr);
if (now.tv_usec > 500000)
++now.tv_sec;