[SCSI] qla2xxx: Wait for IDC complete event to finish loopback operation.
Wait for the IDC complete AEN before returning the loopback operation back to
the application to make sure the port is put back into normal operations.
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c
index 747f440..ad54099 100644
--- a/drivers/scsi/qla2xxx/qla_bsg.c
+++ b/drivers/scsi/qla2xxx/qla_bsg.c
@@ -535,7 +535,7 @@
/* Disable loopback mode */
static inline int
qla81xx_reset_loopback_mode(scsi_qla_host_t *vha, uint16_t *config,
- int wait)
+ int wait, int wait2)
{
int ret = 0;
int rval = 0;
@@ -556,28 +556,45 @@
memcpy(&new_config[1], &config[1], sizeof(uint16_t) * 3) ;
ha->notify_dcbx_comp = wait;
+ ha->notify_lb_portup_comp = wait2;
+
ret = qla81xx_set_port_config(vha, new_config);
if (ret != QLA_SUCCESS) {
ql_log(ql_log_warn, vha, 0x7025,
"Set port config failed.\n");
ha->notify_dcbx_comp = 0;
+ ha->notify_lb_portup_comp = 0;
rval = -EINVAL;
goto done_reset_internal;
}
/* Wait for DCBX complete event */
if (wait && !wait_for_completion_timeout(&ha->dcbx_comp,
- (20 * HZ))) {
+ (DCBX_COMP_TIMEOUT * HZ))) {
ql_dbg(ql_dbg_user, vha, 0x7026,
- "State change notification not received.\n");
+ "DCBX completion not received.\n");
ha->notify_dcbx_comp = 0;
+ ha->notify_lb_portup_comp = 0;
rval = -EINVAL;
goto done_reset_internal;
} else
ql_dbg(ql_dbg_user, vha, 0x7027,
- "State change received.\n");
+ "DCBX completion received.\n");
+
+ if (wait2 &&
+ !wait_for_completion_timeout(&ha->lb_portup_comp,
+ (LB_PORTUP_COMP_TIMEOUT * HZ))) {
+ ql_dbg(ql_dbg_user, vha, 0x70c5,
+ "Port up completion not received.\n");
+ ha->notify_lb_portup_comp = 0;
+ rval = -EINVAL;
+ goto done_reset_internal;
+ } else
+ ql_dbg(ql_dbg_user, vha, 0x70c6,
+ "Port up completion received.\n");
ha->notify_dcbx_comp = 0;
+ ha->notify_lb_portup_comp = 0;
}
done_reset_internal:
return rval;
@@ -618,10 +635,11 @@
}
/* Wait for DCBX complete event */
- if (!wait_for_completion_timeout(&ha->dcbx_comp, (20 * HZ))) {
+ if (!wait_for_completion_timeout(&ha->dcbx_comp,
+ (DCBX_COMP_TIMEOUT * HZ))) {
ql_dbg(ql_dbg_user, vha, 0x7022,
- "State change notification not received.\n");
- ret = qla81xx_reset_loopback_mode(vha, new_config, 0);
+ "DCBX completion not received.\n");
+ ret = qla81xx_reset_loopback_mode(vha, new_config, 0, 0);
/*
* If the reset of the loopback mode doesn't work take a FCoE
* dump and reset the chip.
@@ -639,7 +657,7 @@
ha->flags.idc_compl_status = 0;
} else
ql_dbg(ql_dbg_user, vha, 0x7023,
- "State change received.\n");
+ "DCBX completion received.\n");
}
ha->notify_dcbx_comp = 0;
@@ -749,6 +767,7 @@
if (IS_QLA81XX(ha) || IS_QLA8031(ha)) {
memset(config, 0, sizeof(config));
memset(new_config, 0, sizeof(new_config));
+
if (qla81xx_get_port_config(vha, config)) {
ql_log(ql_log_warn, vha, 0x701f,
"Get port config failed.\n");
@@ -773,7 +792,7 @@
config, new_config, elreq.options);
else
rval = qla81xx_reset_loopback_mode(vha,
- config, 1);
+ config, 1, 0);
else
rval = qla81xx_set_loopback_mode(vha, config,
new_config, elreq.options);
@@ -817,7 +836,7 @@
* Also clear internal loopback
*/
ret = qla81xx_reset_loopback_mode(vha,
- new_config, 0);
+ new_config, 0, 1);
if (ret) {
/*
* If the reset of the loopback mode
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index c081882..c650991 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2882,7 +2882,13 @@
struct completion mbx_cmd_comp; /* Serialize mbx access */
struct completion mbx_intr_comp; /* Used for completion notification */
struct completion dcbx_comp; /* For set port config notification */
+ struct completion lb_portup_comp; /* Used to wait for link up during
+ * loopback */
+#define DCBX_COMP_TIMEOUT 20
+#define LB_PORTUP_COMP_TIMEOUT 10
+
int notify_dcbx_comp;
+ int notify_lb_portup_comp;
struct mutex selflogin_lock;
/* Basic firmware related information. */
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index cbf6a43..e9dbd74 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -1032,6 +1032,9 @@
}
}
case MBA_IDC_COMPLETE:
+ if (ha->notify_lb_portup_comp)
+ complete(&ha->lb_portup_comp);
+ /* Fallthru */
case MBA_IDC_TIME_EXT:
if (IS_QLA81XX(vha->hw) || IS_QLA8031(vha->hw))
qla81xx_idc_event(vha, mb[0], mb[1]);
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index c484e21..2c6dd3d 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -2465,6 +2465,7 @@
complete(&ha->mbx_cmd_comp);
init_completion(&ha->mbx_intr_comp);
init_completion(&ha->dcbx_comp);
+ init_completion(&ha->lb_portup_comp);
set_bit(0, (unsigned long *) ha->vp_idx_map);