| /* |
| * Copyright 2010 Red Hat Inc. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR |
| * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, |
| * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| * |
| * Authors: Ben Skeggs |
| */ |
| |
| #ifdef CONFIG_ACPI |
| #include <linux/acpi.h> |
| #endif |
| #include <linux/power_supply.h> |
| #include <linux/hwmon.h> |
| #include <linux/hwmon-sysfs.h> |
| |
| #include <drm/drmP.h> |
| |
| #include "nouveau_drm.h" |
| #include "nouveau_pm.h" |
| |
| #include <subdev/gpio.h> |
| #include <subdev/timer.h> |
| #include <subdev/therm.h> |
| |
| MODULE_PARM_DESC(perflvl, "Performance level (default: boot)"); |
| static char *nouveau_perflvl; |
| module_param_named(perflvl, nouveau_perflvl, charp, 0400); |
| |
| MODULE_PARM_DESC(perflvl_wr, "Allow perflvl changes (warning: dangerous!)"); |
| static int nouveau_perflvl_wr; |
| module_param_named(perflvl_wr, nouveau_perflvl_wr, int, 0400); |
| |
| static int |
| nouveau_pm_perflvl_aux(struct drm_device *dev, struct nouveau_pm_level *perflvl, |
| struct nouveau_pm_level *a, struct nouveau_pm_level *b) |
| { |
| struct nouveau_drm *drm = nouveau_drm(dev); |
| struct nouveau_pm *pm = nouveau_pm(dev); |
| struct nouveau_therm *therm = nouveau_therm(drm->device); |
| int ret; |
| |
| /*XXX: not on all boards, we should control based on temperature |
| * on recent boards.. or maybe on some other factor we don't |
| * know about? |
| */ |
| if (therm && therm->fan_set && |
| a->fanspeed && b->fanspeed && b->fanspeed > a->fanspeed) { |
| ret = therm->fan_set(therm, perflvl->fanspeed); |
| if (ret && ret != -ENODEV) { |
| NV_ERROR(drm, "fanspeed set failed: %d\n", ret); |
| } |
| } |
| |
| if (pm->voltage.supported && pm->voltage_set) { |
| if (perflvl->volt_min && b->volt_min > a->volt_min) { |
| ret = pm->voltage_set(dev, perflvl->volt_min); |
| if (ret) { |
| NV_ERROR(drm, "voltage set failed: %d\n", ret); |
| return ret; |
| } |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int |
| nouveau_pm_perflvl_set(struct drm_device *dev, struct nouveau_pm_level *perflvl) |
| { |
| struct nouveau_pm *pm = nouveau_pm(dev); |
| void *state; |
| int ret; |
| |
| if (perflvl == pm->cur) |
| return 0; |
| |
| ret = nouveau_pm_perflvl_aux(dev, perflvl, pm->cur, perflvl); |
| if (ret) |
| return ret; |
| |
| state = pm->clocks_pre(dev, perflvl); |
| if (IS_ERR(state)) { |
| ret = PTR_ERR(state); |
| goto error; |
| } |
| ret = pm->clocks_set(dev, state); |
| if (ret) |
| goto error; |
| |
| ret = nouveau_pm_perflvl_aux(dev, perflvl, perflvl, pm->cur); |
| if (ret) |
| return ret; |
| |
| pm->cur = perflvl; |
| return 0; |
| |
| error: |
| /* restore the fan speed and voltage before leaving */ |
| nouveau_pm_perflvl_aux(dev, perflvl, perflvl, pm->cur); |
| return ret; |
| } |
| |
| void |
| nouveau_pm_trigger(struct drm_device *dev) |
| { |
| struct nouveau_drm *drm = nouveau_drm(dev); |
| struct nouveau_timer *ptimer = nouveau_timer(drm->device); |
| struct nouveau_pm *pm = nouveau_pm(dev); |
| struct nouveau_pm_profile *profile = NULL; |
| struct nouveau_pm_level *perflvl = NULL; |
| int ret; |
| |
| /* select power profile based on current power source */ |
| if (power_supply_is_system_supplied()) |
| profile = pm->profile_ac; |
| else |
| profile = pm->profile_dc; |
| |
| if (profile != pm->profile) { |
| pm->profile->func->fini(pm->profile); |
| pm->profile = profile; |
| pm->profile->func->init(pm->profile); |
| } |
| |
| /* select performance level based on profile */ |
| perflvl = profile->func->select(profile); |
| |
| /* change perflvl, if necessary */ |
| if (perflvl != pm->cur) { |
| u64 time0 = ptimer->read(ptimer); |
| |
| NV_INFO(drm, "setting performance level: %d", perflvl->id); |
| ret = nouveau_pm_perflvl_set(dev, perflvl); |
| if (ret) |
| NV_INFO(drm, "> reclocking failed: %d\n\n", ret); |
| |
| NV_INFO(drm, "> reclocking took %lluns\n\n", |
| ptimer->read(ptimer) - time0); |
| } |
| } |
| |
| static struct nouveau_pm_profile * |
| profile_find(struct drm_device *dev, const char *string) |
| { |
| struct nouveau_pm *pm = nouveau_pm(dev); |
| struct nouveau_pm_profile *profile; |
| |
| list_for_each_entry(profile, &pm->profiles, head) { |
| if (!strncmp(profile->name, string, sizeof(profile->name))) |
| return profile; |
| } |
| |
| return NULL; |
| } |
| |
| static int |
| nouveau_pm_profile_set(struct drm_device *dev, const char *profile) |
| { |
| struct nouveau_pm *pm = nouveau_pm(dev); |
| struct nouveau_pm_profile *ac = NULL, *dc = NULL; |
| char string[16], *cur = string, *ptr; |
| |
| /* safety precaution, for now */ |
| if (nouveau_perflvl_wr != 7777) |
| return -EPERM; |
| |
| strncpy(string, profile, sizeof(string)); |
| string[sizeof(string) - 1] = 0; |
| if ((ptr = strchr(string, '\n'))) |
| *ptr = '\0'; |
| |
| ptr = strsep(&cur, ","); |
| if (ptr) |
| ac = profile_find(dev, ptr); |
| |
| ptr = strsep(&cur, ","); |
| if (ptr) |
| dc = profile_find(dev, ptr); |
| else |
| dc = ac; |
| |
| if (ac == NULL || dc == NULL) |
| return -EINVAL; |
| |
| pm->profile_ac = ac; |
| pm->profile_dc = dc; |
| nouveau_pm_trigger(dev); |
| return 0; |
| } |
| |
| static void |
| nouveau_pm_static_dummy(struct nouveau_pm_profile *profile) |
| { |
| } |
| |
| static struct nouveau_pm_level * |
| nouveau_pm_static_select(struct nouveau_pm_profile *profile) |
| { |
| return container_of(profile, struct nouveau_pm_level, profile); |
| } |
| |
| const struct nouveau_pm_profile_func nouveau_pm_static_profile_func = { |
| .destroy = nouveau_pm_static_dummy, |
| .init = nouveau_pm_static_dummy, |
| .fini = nouveau_pm_static_dummy, |
| .select = nouveau_pm_static_select, |
| }; |
| |
| static int |
| nouveau_pm_perflvl_get(struct drm_device *dev, struct nouveau_pm_level *perflvl) |
| { |
| struct nouveau_drm *drm = nouveau_drm(dev); |
| struct nouveau_pm *pm = nouveau_pm(dev); |
| struct nouveau_therm *therm = nouveau_therm(drm->device); |
| int ret; |
| |
| memset(perflvl, 0, sizeof(*perflvl)); |
| |
| if (pm->clocks_get) { |
| ret = pm->clocks_get(dev, perflvl); |
| if (ret) |
| return ret; |
| } |
| |
| if (pm->voltage.supported && pm->voltage_get) { |
| ret = pm->voltage_get(dev); |
| if (ret > 0) { |
| perflvl->volt_min = ret; |
| perflvl->volt_max = ret; |
| } |
| } |
| |
| if (therm && therm->fan_get) { |
| ret = therm->fan_get(therm); |
| if (ret >= 0) |
| perflvl->fanspeed = ret; |
| } |
| |
| nouveau_mem_timing_read(dev, &perflvl->timing); |
| return 0; |
| } |
| |
| static void |
| nouveau_pm_perflvl_info(struct nouveau_pm_level *perflvl, char *ptr, int len) |
| { |
| char c[16], s[16], v[32], f[16], m[16]; |
| |
| c[0] = '\0'; |
| if (perflvl->core) |
| snprintf(c, sizeof(c), " core %dMHz", perflvl->core / 1000); |
| |
| s[0] = '\0'; |
| if (perflvl->shader) |
| snprintf(s, sizeof(s), " shader %dMHz", perflvl->shader / 1000); |
| |
| m[0] = '\0'; |
| if (perflvl->memory) |
| snprintf(m, sizeof(m), " memory %dMHz", perflvl->memory / 1000); |
| |
| v[0] = '\0'; |
| if (perflvl->volt_min && perflvl->volt_min != perflvl->volt_max) { |
| snprintf(v, sizeof(v), " voltage %dmV-%dmV", |
| perflvl->volt_min / 1000, perflvl->volt_max / 1000); |
| } else |
| if (perflvl->volt_min) { |
| snprintf(v, sizeof(v), " voltage %dmV", |
| perflvl->volt_min / 1000); |
| } |
| |
| f[0] = '\0'; |
| if (perflvl->fanspeed) |
| snprintf(f, sizeof(f), " fanspeed %d%%", perflvl->fanspeed); |
| |
| snprintf(ptr, len, "%s%s%s%s%s\n", c, s, m, v, f); |
| } |
| |
| static ssize_t |
| nouveau_pm_get_perflvl_info(struct device *d, |
| struct device_attribute *a, char *buf) |
| { |
| struct nouveau_pm_level *perflvl = |
| container_of(a, struct nouveau_pm_level, dev_attr); |
| char *ptr = buf; |
| int len = PAGE_SIZE; |
| |
| snprintf(ptr, len, "%d:", perflvl->id); |
| ptr += strlen(buf); |
| len -= strlen(buf); |
| |
| nouveau_pm_perflvl_info(perflvl, ptr, len); |
| return strlen(buf); |
| } |
| |
| static ssize_t |
| nouveau_pm_get_perflvl(struct device *d, struct device_attribute *a, char *buf) |
| { |
| struct drm_device *dev = pci_get_drvdata(to_pci_dev(d)); |
| struct nouveau_pm *pm = nouveau_pm(dev); |
| struct nouveau_pm_level cur; |
| int len = PAGE_SIZE, ret; |
| char *ptr = buf; |
| |
| snprintf(ptr, len, "profile: %s, %s\nc:", |
| pm->profile_ac->name, pm->profile_dc->name); |
| ptr += strlen(buf); |
| len -= strlen(buf); |
| |
| ret = nouveau_pm_perflvl_get(dev, &cur); |
| if (ret == 0) |
| nouveau_pm_perflvl_info(&cur, ptr, len); |
| return strlen(buf); |
| } |
| |
| static ssize_t |
| nouveau_pm_set_perflvl(struct device *d, struct device_attribute *a, |
| const char *buf, size_t count) |
| { |
| struct drm_device *dev = pci_get_drvdata(to_pci_dev(d)); |
| int ret; |
| |
| ret = nouveau_pm_profile_set(dev, buf); |
| if (ret) |
| return ret; |
| return strlen(buf); |
| } |
| |
| static DEVICE_ATTR(performance_level, S_IRUGO | S_IWUSR, |
| nouveau_pm_get_perflvl, nouveau_pm_set_perflvl); |
| |
| static int |
| nouveau_sysfs_init(struct drm_device *dev) |
| { |
| struct nouveau_drm *drm = nouveau_drm(dev); |
| struct nouveau_pm *pm = nouveau_pm(dev); |
| struct device *d = &dev->pdev->dev; |
| int ret, i; |
| |
| ret = device_create_file(d, &dev_attr_performance_level); |
| if (ret) |
| return ret; |
| |
| for (i = 0; i < pm->nr_perflvl; i++) { |
| struct nouveau_pm_level *perflvl = &pm->perflvl[i]; |
| |
| perflvl->dev_attr.attr.name = perflvl->name; |
| perflvl->dev_attr.attr.mode = S_IRUGO; |
| perflvl->dev_attr.show = nouveau_pm_get_perflvl_info; |
| perflvl->dev_attr.store = NULL; |
| sysfs_attr_init(&perflvl->dev_attr.attr); |
| |
| ret = device_create_file(d, &perflvl->dev_attr); |
| if (ret) { |
| NV_ERROR(drm, "failed pervlvl %d sysfs: %d\n", |
| perflvl->id, i); |
| perflvl->dev_attr.attr.name = NULL; |
| nouveau_pm_fini(dev); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void |
| nouveau_sysfs_fini(struct drm_device *dev) |
| { |
| struct nouveau_pm *pm = nouveau_pm(dev); |
| struct device *d = &dev->pdev->dev; |
| int i; |
| |
| device_remove_file(d, &dev_attr_performance_level); |
| for (i = 0; i < pm->nr_perflvl; i++) { |
| struct nouveau_pm_level *pl = &pm->perflvl[i]; |
| |
| if (!pl->dev_attr.attr.name) |
| break; |
| |
| device_remove_file(d, &pl->dev_attr); |
| } |
| } |
| |
| #if defined(CONFIG_HWMON) || (defined(MODULE) && defined(CONFIG_HWMON_MODULE)) |
| static ssize_t |
| nouveau_hwmon_show_temp(struct device *d, struct device_attribute *a, char *buf) |
| { |
| struct drm_device *dev = dev_get_drvdata(d); |
| struct nouveau_drm *drm = nouveau_drm(dev); |
| struct nouveau_therm *therm = nouveau_therm(drm->device); |
| |
| return snprintf(buf, PAGE_SIZE, "%d\n", therm->temp_get(therm) * 1000); |
| } |
| static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, nouveau_hwmon_show_temp, |
| NULL, 0); |
| |
| static ssize_t |
| nouveau_hwmon_max_temp(struct device *d, struct device_attribute *a, char *buf) |
| { |
| struct drm_device *dev = dev_get_drvdata(d); |
| struct nouveau_drm *drm = nouveau_drm(dev); |
| struct nouveau_therm *therm = nouveau_therm(drm->device); |
| |
| return snprintf(buf, PAGE_SIZE, "%d\n", |
| therm->attr_get(therm, NOUVEAU_THERM_ATTR_THRS_DOWN_CLK) * 1000); |
| } |
| static ssize_t |
| nouveau_hwmon_set_max_temp(struct device *d, struct device_attribute *a, |
| const char *buf, size_t count) |
| { |
| struct drm_device *dev = dev_get_drvdata(d); |
| struct nouveau_drm *drm = nouveau_drm(dev); |
| struct nouveau_therm *therm = nouveau_therm(drm->device); |
| long value; |
| |
| if (kstrtol(buf, 10, &value) == -EINVAL) |
| return count; |
| |
| therm->attr_set(therm, NOUVEAU_THERM_ATTR_THRS_DOWN_CLK, value / 1000); |
| |
| return count; |
| } |
| static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR, nouveau_hwmon_max_temp, |
| nouveau_hwmon_set_max_temp, |
| 0); |
| |
| static ssize_t |
| nouveau_hwmon_critical_temp(struct device *d, struct device_attribute *a, |
| char *buf) |
| { |
| struct drm_device *dev = dev_get_drvdata(d); |
| struct nouveau_drm *drm = nouveau_drm(dev); |
| struct nouveau_therm *therm = nouveau_therm(drm->device); |
| |
| return snprintf(buf, PAGE_SIZE, "%d\n", |
| therm->attr_get(therm, NOUVEAU_THERM_ATTR_THRS_CRITICAL) * 1000); |
| } |
| static ssize_t |
| nouveau_hwmon_set_critical_temp(struct device *d, struct device_attribute *a, |
| const char *buf, |
| size_t count) |
| { |
| struct drm_device *dev = dev_get_drvdata(d); |
| struct nouveau_drm *drm = nouveau_drm(dev); |
| struct nouveau_therm *therm = nouveau_therm(drm->device); |
| long value; |
| |
| if (kstrtol(buf, 10, &value) == -EINVAL) |
| return count; |
| |
| therm->attr_set(therm, NOUVEAU_THERM_ATTR_THRS_CRITICAL, value / 1000); |
| |
| return count; |
| } |
| static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO | S_IWUSR, |
| nouveau_hwmon_critical_temp, |
| nouveau_hwmon_set_critical_temp, |
| 0); |
| |
| static ssize_t nouveau_hwmon_show_name(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| return sprintf(buf, "nouveau\n"); |
| } |
| static SENSOR_DEVICE_ATTR(name, S_IRUGO, nouveau_hwmon_show_name, NULL, 0); |
| |
| static ssize_t nouveau_hwmon_show_update_rate(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| return sprintf(buf, "1000\n"); |
| } |
| static SENSOR_DEVICE_ATTR(update_rate, S_IRUGO, |
| nouveau_hwmon_show_update_rate, |
| NULL, 0); |
| |
| static ssize_t |
| nouveau_hwmon_show_fan0_input(struct device *d, struct device_attribute *attr, |
| char *buf) |
| { |
| struct drm_device *dev = dev_get_drvdata(d); |
| struct nouveau_drm *drm = nouveau_drm(dev); |
| struct nouveau_therm *therm = nouveau_therm(drm->device); |
| |
| return snprintf(buf, PAGE_SIZE, "%d\n", therm->fan_sense(therm)); |
| } |
| static SENSOR_DEVICE_ATTR(fan0_input, S_IRUGO, nouveau_hwmon_show_fan0_input, |
| NULL, 0); |
| |
| static ssize_t |
| nouveau_hwmon_get_pwm1_enable(struct device *d, |
| struct device_attribute *a, char *buf) |
| { |
| struct drm_device *dev = dev_get_drvdata(d); |
| struct nouveau_drm *drm = nouveau_drm(dev); |
| struct nouveau_therm *therm = nouveau_therm(drm->device); |
| int ret; |
| |
| ret = therm->attr_get(therm, NOUVEAU_THERM_ATTR_FAN_MODE); |
| if (ret < 0) |
| return ret; |
| |
| return sprintf(buf, "%i\n", ret); |
| } |
| |
| static ssize_t |
| nouveau_hwmon_set_pwm1_enable(struct device *d, struct device_attribute *a, |
| const char *buf, size_t count) |
| { |
| struct drm_device *dev = dev_get_drvdata(d); |
| struct nouveau_drm *drm = nouveau_drm(dev); |
| struct nouveau_therm *therm = nouveau_therm(drm->device); |
| long value; |
| int ret; |
| |
| if (strict_strtol(buf, 10, &value) == -EINVAL) |
| return -EINVAL; |
| |
| ret = therm->attr_set(therm, NOUVEAU_THERM_ATTR_FAN_MODE, value); |
| if (ret) |
| return ret; |
| else |
| return count; |
| } |
| static SENSOR_DEVICE_ATTR(pwm1_enable, S_IRUGO | S_IWUSR, |
| nouveau_hwmon_get_pwm1_enable, |
| nouveau_hwmon_set_pwm1_enable, 0); |
| |
| static ssize_t |
| nouveau_hwmon_get_pwm1(struct device *d, struct device_attribute *a, char *buf) |
| { |
| struct drm_device *dev = dev_get_drvdata(d); |
| struct nouveau_drm *drm = nouveau_drm(dev); |
| struct nouveau_therm *therm = nouveau_therm(drm->device); |
| int ret; |
| |
| ret = therm->fan_get(therm); |
| if (ret < 0) |
| return ret; |
| |
| return sprintf(buf, "%i\n", ret); |
| } |
| |
| static ssize_t |
| nouveau_hwmon_set_pwm1(struct device *d, struct device_attribute *a, |
| const char *buf, size_t count) |
| { |
| struct drm_device *dev = dev_get_drvdata(d); |
| struct nouveau_drm *drm = nouveau_drm(dev); |
| struct nouveau_therm *therm = nouveau_therm(drm->device); |
| int ret = -ENODEV; |
| long value; |
| |
| if (nouveau_perflvl_wr != 7777) |
| return -EPERM; |
| |
| if (kstrtol(buf, 10, &value) == -EINVAL) |
| return -EINVAL; |
| |
| ret = therm->fan_set(therm, value); |
| if (ret) |
| return ret; |
| |
| return count; |
| } |
| |
| static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, |
| nouveau_hwmon_get_pwm1, |
| nouveau_hwmon_set_pwm1, 0); |
| |
| static ssize_t |
| nouveau_hwmon_get_pwm1_min(struct device *d, |
| struct device_attribute *a, char *buf) |
| { |
| struct drm_device *dev = dev_get_drvdata(d); |
| struct nouveau_drm *drm = nouveau_drm(dev); |
| struct nouveau_therm *therm = nouveau_therm(drm->device); |
| int ret; |
| |
| ret = therm->attr_get(therm, NOUVEAU_THERM_ATTR_FAN_MIN_DUTY); |
| if (ret < 0) |
| return ret; |
| |
| return sprintf(buf, "%i\n", ret); |
| } |
| |
| static ssize_t |
| nouveau_hwmon_set_pwm1_min(struct device *d, struct device_attribute *a, |
| const char *buf, size_t count) |
| { |
| struct drm_device *dev = dev_get_drvdata(d); |
| struct nouveau_drm *drm = nouveau_drm(dev); |
| struct nouveau_therm *therm = nouveau_therm(drm->device); |
| long value; |
| int ret; |
| |
| if (kstrtol(buf, 10, &value) == -EINVAL) |
| return -EINVAL; |
| |
| ret = therm->attr_set(therm, NOUVEAU_THERM_ATTR_FAN_MIN_DUTY, value); |
| if (ret < 0) |
| return ret; |
| |
| return count; |
| } |
| |
| static SENSOR_DEVICE_ATTR(pwm1_min, S_IRUGO | S_IWUSR, |
| nouveau_hwmon_get_pwm1_min, |
| nouveau_hwmon_set_pwm1_min, 0); |
| |
| static ssize_t |
| nouveau_hwmon_get_pwm1_max(struct device *d, |
| struct device_attribute *a, char *buf) |
| { |
| struct drm_device *dev = dev_get_drvdata(d); |
| struct nouveau_drm *drm = nouveau_drm(dev); |
| struct nouveau_therm *therm = nouveau_therm(drm->device); |
| int ret; |
| |
| ret = therm->attr_get(therm, NOUVEAU_THERM_ATTR_FAN_MAX_DUTY); |
| if (ret < 0) |
| return ret; |
| |
| return sprintf(buf, "%i\n", ret); |
| } |
| |
| static ssize_t |
| nouveau_hwmon_set_pwm1_max(struct device *d, struct device_attribute *a, |
| const char *buf, size_t count) |
| { |
| struct drm_device *dev = dev_get_drvdata(d); |
| struct nouveau_drm *drm = nouveau_drm(dev); |
| struct nouveau_therm *therm = nouveau_therm(drm->device); |
| long value; |
| int ret; |
| |
| if (kstrtol(buf, 10, &value) == -EINVAL) |
| return -EINVAL; |
| |
| ret = therm->attr_set(therm, NOUVEAU_THERM_ATTR_FAN_MAX_DUTY, value); |
| if (ret < 0) |
| return ret; |
| |
| return count; |
| } |
| |
| static SENSOR_DEVICE_ATTR(pwm1_max, S_IRUGO | S_IWUSR, |
| nouveau_hwmon_get_pwm1_max, |
| nouveau_hwmon_set_pwm1_max, 0); |
| |
| static struct attribute *hwmon_attributes[] = { |
| &sensor_dev_attr_temp1_input.dev_attr.attr, |
| &sensor_dev_attr_temp1_max.dev_attr.attr, |
| &sensor_dev_attr_temp1_crit.dev_attr.attr, |
| &sensor_dev_attr_name.dev_attr.attr, |
| &sensor_dev_attr_update_rate.dev_attr.attr, |
| NULL |
| }; |
| static struct attribute *hwmon_fan_rpm_attributes[] = { |
| &sensor_dev_attr_fan0_input.dev_attr.attr, |
| NULL |
| }; |
| static struct attribute *hwmon_pwm_fan_attributes[] = { |
| &sensor_dev_attr_pwm1_enable.dev_attr.attr, |
| &sensor_dev_attr_pwm1.dev_attr.attr, |
| &sensor_dev_attr_pwm1_min.dev_attr.attr, |
| &sensor_dev_attr_pwm1_max.dev_attr.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group hwmon_attrgroup = { |
| .attrs = hwmon_attributes, |
| }; |
| static const struct attribute_group hwmon_fan_rpm_attrgroup = { |
| .attrs = hwmon_fan_rpm_attributes, |
| }; |
| static const struct attribute_group hwmon_pwm_fan_attrgroup = { |
| .attrs = hwmon_pwm_fan_attributes, |
| }; |
| #endif |
| |
| static int |
| nouveau_hwmon_init(struct drm_device *dev) |
| { |
| struct nouveau_pm *pm = nouveau_pm(dev); |
| struct nouveau_drm *drm = nouveau_drm(dev); |
| struct nouveau_therm *therm = nouveau_therm(drm->device); |
| |
| #if defined(CONFIG_HWMON) || (defined(MODULE) && defined(CONFIG_HWMON_MODULE)) |
| struct device *hwmon_dev; |
| int ret = 0; |
| |
| if (!therm || !therm->temp_get || !therm->attr_get || !therm->attr_set) |
| return -ENODEV; |
| |
| hwmon_dev = hwmon_device_register(&dev->pdev->dev); |
| if (IS_ERR(hwmon_dev)) { |
| ret = PTR_ERR(hwmon_dev); |
| NV_ERROR(drm, "Unable to register hwmon device: %d\n", ret); |
| return ret; |
| } |
| dev_set_drvdata(hwmon_dev, dev); |
| |
| /* default sysfs entries */ |
| ret = sysfs_create_group(&dev->pdev->dev.kobj, &hwmon_attrgroup); |
| if (ret) { |
| if (ret) |
| goto error; |
| } |
| |
| /* if the card has a pwm fan */ |
| /*XXX: incorrect, need better detection for this, some boards have |
| * the gpio entries for pwm fan control even when there's no |
| * actual fan connected to it... therm table? */ |
| if (therm->fan_get && therm->fan_get(therm) >= 0) { |
| ret = sysfs_create_group(&dev->pdev->dev.kobj, |
| &hwmon_pwm_fan_attrgroup); |
| if (ret) |
| goto error; |
| } |
| |
| /* if the card can read the fan rpm */ |
| if (therm->fan_sense(therm) >= 0) { |
| ret = sysfs_create_group(&dev->pdev->dev.kobj, |
| &hwmon_fan_rpm_attrgroup); |
| if (ret) |
| goto error; |
| } |
| |
| pm->hwmon = hwmon_dev; |
| |
| return 0; |
| |
| error: |
| NV_ERROR(drm, "Unable to create some hwmon sysfs files: %d\n", ret); |
| hwmon_device_unregister(hwmon_dev); |
| pm->hwmon = NULL; |
| return ret; |
| #else |
| pm->hwmon = NULL; |
| return 0; |
| #endif |
| } |
| |
| static void |
| nouveau_hwmon_fini(struct drm_device *dev) |
| { |
| #if defined(CONFIG_HWMON) || (defined(MODULE) && defined(CONFIG_HWMON_MODULE)) |
| struct nouveau_pm *pm = nouveau_pm(dev); |
| |
| if (pm->hwmon) { |
| sysfs_remove_group(&dev->pdev->dev.kobj, &hwmon_attrgroup); |
| sysfs_remove_group(&dev->pdev->dev.kobj, |
| &hwmon_pwm_fan_attrgroup); |
| sysfs_remove_group(&dev->pdev->dev.kobj, |
| &hwmon_fan_rpm_attrgroup); |
| |
| hwmon_device_unregister(pm->hwmon); |
| } |
| #endif |
| } |
| |
| #if defined(CONFIG_ACPI) && defined(CONFIG_POWER_SUPPLY) |
| static int |
| nouveau_pm_acpi_event(struct notifier_block *nb, unsigned long val, void *data) |
| { |
| struct nouveau_pm *pm = container_of(nb, struct nouveau_pm, acpi_nb); |
| struct nouveau_drm *drm = nouveau_drm(pm->dev); |
| struct acpi_bus_event *entry = (struct acpi_bus_event *)data; |
| |
| if (strcmp(entry->device_class, "ac_adapter") == 0) { |
| bool ac = power_supply_is_system_supplied(); |
| |
| NV_DEBUG(drm, "power supply changed: %s\n", ac ? "AC" : "DC"); |
| nouveau_pm_trigger(pm->dev); |
| } |
| |
| return NOTIFY_OK; |
| } |
| #endif |
| |
| int |
| nouveau_pm_init(struct drm_device *dev) |
| { |
| struct nouveau_device *device = nouveau_dev(dev); |
| struct nouveau_drm *drm = nouveau_drm(dev); |
| struct nouveau_pm *pm; |
| char info[256]; |
| int ret, i; |
| |
| pm = drm->pm = kzalloc(sizeof(*pm), GFP_KERNEL); |
| if (!pm) |
| return -ENOMEM; |
| |
| pm->dev = dev; |
| |
| if (device->card_type < NV_40) { |
| pm->clocks_get = nv04_pm_clocks_get; |
| pm->clocks_pre = nv04_pm_clocks_pre; |
| pm->clocks_set = nv04_pm_clocks_set; |
| if (nouveau_gpio(drm->device)) { |
| pm->voltage_get = nouveau_voltage_gpio_get; |
| pm->voltage_set = nouveau_voltage_gpio_set; |
| } |
| } else |
| if (device->card_type < NV_50) { |
| pm->clocks_get = nv40_pm_clocks_get; |
| pm->clocks_pre = nv40_pm_clocks_pre; |
| pm->clocks_set = nv40_pm_clocks_set; |
| pm->voltage_get = nouveau_voltage_gpio_get; |
| pm->voltage_set = nouveau_voltage_gpio_set; |
| } else |
| if (device->card_type < NV_C0) { |
| if (device->chipset < 0xa3 || |
| device->chipset == 0xaa || |
| device->chipset == 0xac) { |
| pm->clocks_get = nv50_pm_clocks_get; |
| pm->clocks_pre = nv50_pm_clocks_pre; |
| pm->clocks_set = nv50_pm_clocks_set; |
| } else { |
| pm->clocks_get = nva3_pm_clocks_get; |
| pm->clocks_pre = nva3_pm_clocks_pre; |
| pm->clocks_set = nva3_pm_clocks_set; |
| } |
| pm->voltage_get = nouveau_voltage_gpio_get; |
| pm->voltage_set = nouveau_voltage_gpio_set; |
| } else |
| if (device->card_type < NV_E0) { |
| pm->clocks_get = nvc0_pm_clocks_get; |
| pm->clocks_pre = nvc0_pm_clocks_pre; |
| pm->clocks_set = nvc0_pm_clocks_set; |
| pm->voltage_get = nouveau_voltage_gpio_get; |
| pm->voltage_set = nouveau_voltage_gpio_set; |
| } |
| |
| |
| /* parse aux tables from vbios */ |
| nouveau_volt_init(dev); |
| |
| INIT_LIST_HEAD(&pm->profiles); |
| |
| /* determine current ("boot") performance level */ |
| ret = nouveau_pm_perflvl_get(dev, &pm->boot); |
| if (ret) { |
| NV_ERROR(drm, "failed to determine boot perflvl\n"); |
| return ret; |
| } |
| |
| strncpy(pm->boot.name, "boot", 4); |
| strncpy(pm->boot.profile.name, "boot", 4); |
| pm->boot.profile.func = &nouveau_pm_static_profile_func; |
| |
| list_add(&pm->boot.profile.head, &pm->profiles); |
| |
| pm->profile_ac = &pm->boot.profile; |
| pm->profile_dc = &pm->boot.profile; |
| pm->profile = &pm->boot.profile; |
| pm->cur = &pm->boot; |
| |
| /* add performance levels from vbios */ |
| nouveau_perf_init(dev); |
| |
| /* display available performance levels */ |
| NV_INFO(drm, "%d available performance level(s)\n", pm->nr_perflvl); |
| for (i = 0; i < pm->nr_perflvl; i++) { |
| nouveau_pm_perflvl_info(&pm->perflvl[i], info, sizeof(info)); |
| NV_INFO(drm, "%d:%s", pm->perflvl[i].id, info); |
| } |
| |
| nouveau_pm_perflvl_info(&pm->boot, info, sizeof(info)); |
| NV_INFO(drm, "c:%s", info); |
| |
| /* switch performance levels now if requested */ |
| if (nouveau_perflvl != NULL) |
| nouveau_pm_profile_set(dev, nouveau_perflvl); |
| |
| nouveau_sysfs_init(dev); |
| nouveau_hwmon_init(dev); |
| #if defined(CONFIG_ACPI) && defined(CONFIG_POWER_SUPPLY) |
| pm->acpi_nb.notifier_call = nouveau_pm_acpi_event; |
| register_acpi_notifier(&pm->acpi_nb); |
| #endif |
| |
| return 0; |
| } |
| |
| void |
| nouveau_pm_fini(struct drm_device *dev) |
| { |
| struct nouveau_pm *pm = nouveau_pm(dev); |
| struct nouveau_pm_profile *profile, *tmp; |
| |
| list_for_each_entry_safe(profile, tmp, &pm->profiles, head) { |
| list_del(&profile->head); |
| profile->func->destroy(profile); |
| } |
| |
| if (pm->cur != &pm->boot) |
| nouveau_pm_perflvl_set(dev, &pm->boot); |
| |
| nouveau_perf_fini(dev); |
| nouveau_volt_fini(dev); |
| |
| #if defined(CONFIG_ACPI) && defined(CONFIG_POWER_SUPPLY) |
| unregister_acpi_notifier(&pm->acpi_nb); |
| #endif |
| nouveau_hwmon_fini(dev); |
| nouveau_sysfs_fini(dev); |
| |
| nouveau_drm(dev)->pm = NULL; |
| kfree(pm); |
| } |
| |
| void |
| nouveau_pm_resume(struct drm_device *dev) |
| { |
| struct nouveau_pm *pm = nouveau_pm(dev); |
| struct nouveau_pm_level *perflvl; |
| |
| if (!pm->cur || pm->cur == &pm->boot) |
| return; |
| |
| perflvl = pm->cur; |
| pm->cur = &pm->boot; |
| nouveau_pm_perflvl_set(dev, perflvl); |
| } |