| /* |
| * drivers/net/phy/at803x.c |
| * |
| * Driver for Atheros 803x PHY |
| * |
| * Author: Matus Ujhelyi <ujhelyi.m@gmail.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #include <linux/phy.h> |
| #include <linux/module.h> |
| #include <linux/string.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| |
| #define AT803X_INTR_ENABLE 0x12 |
| #define AT803X_INTR_STATUS 0x13 |
| #define AT803X_WOL_ENABLE 0x01 |
| #define AT803X_DEVICE_ADDR 0x03 |
| #define AT803X_LOC_MAC_ADDR_0_15_OFFSET 0x804C |
| #define AT803X_LOC_MAC_ADDR_16_31_OFFSET 0x804B |
| #define AT803X_LOC_MAC_ADDR_32_47_OFFSET 0x804A |
| #define AT803X_MMD_ACCESS_CONTROL 0x0D |
| #define AT803X_MMD_ACCESS_CONTROL_DATA 0x0E |
| #define AT803X_FUNC_DATA 0x4003 |
| |
| MODULE_DESCRIPTION("Atheros 803x PHY driver"); |
| MODULE_AUTHOR("Matus Ujhelyi"); |
| MODULE_LICENSE("GPL"); |
| |
| static void at803x_set_wol_mac_addr(struct phy_device *phydev) |
| { |
| struct net_device *ndev = phydev->attached_dev; |
| const u8 *mac; |
| unsigned int i, offsets[] = { |
| AT803X_LOC_MAC_ADDR_32_47_OFFSET, |
| AT803X_LOC_MAC_ADDR_16_31_OFFSET, |
| AT803X_LOC_MAC_ADDR_0_15_OFFSET, |
| }; |
| |
| if (!ndev) |
| return; |
| |
| mac = (const u8 *) ndev->dev_addr; |
| |
| if (!is_valid_ether_addr(mac)) |
| return; |
| |
| for (i = 0; i < 3; i++) { |
| phy_write(phydev, AT803X_MMD_ACCESS_CONTROL, |
| AT803X_DEVICE_ADDR); |
| phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA, |
| offsets[i]); |
| phy_write(phydev, AT803X_MMD_ACCESS_CONTROL, |
| AT803X_FUNC_DATA); |
| phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA, |
| mac[(i * 2) + 1] | (mac[(i * 2)] << 8)); |
| } |
| } |
| |
| static int at803x_config_init(struct phy_device *phydev) |
| { |
| int val; |
| u32 features; |
| int status; |
| |
| features = SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_AUI | |
| SUPPORTED_FIBRE | SUPPORTED_BNC; |
| |
| val = phy_read(phydev, MII_BMSR); |
| if (val < 0) |
| return val; |
| |
| if (val & BMSR_ANEGCAPABLE) |
| features |= SUPPORTED_Autoneg; |
| if (val & BMSR_100FULL) |
| features |= SUPPORTED_100baseT_Full; |
| if (val & BMSR_100HALF) |
| features |= SUPPORTED_100baseT_Half; |
| if (val & BMSR_10FULL) |
| features |= SUPPORTED_10baseT_Full; |
| if (val & BMSR_10HALF) |
| features |= SUPPORTED_10baseT_Half; |
| |
| if (val & BMSR_ESTATEN) { |
| val = phy_read(phydev, MII_ESTATUS); |
| if (val < 0) |
| return val; |
| |
| if (val & ESTATUS_1000_TFULL) |
| features |= SUPPORTED_1000baseT_Full; |
| if (val & ESTATUS_1000_THALF) |
| features |= SUPPORTED_1000baseT_Half; |
| } |
| |
| phydev->supported = features; |
| phydev->advertising = features; |
| |
| /* enable WOL */ |
| at803x_set_wol_mac_addr(phydev); |
| status = phy_write(phydev, AT803X_INTR_ENABLE, AT803X_WOL_ENABLE); |
| status = phy_read(phydev, AT803X_INTR_STATUS); |
| |
| return 0; |
| } |
| |
| /* ATHEROS 8035 */ |
| static struct phy_driver at8035_driver = { |
| .phy_id = 0x004dd072, |
| .name = "Atheros 8035 ethernet", |
| .phy_id_mask = 0xffffffef, |
| .config_init = at803x_config_init, |
| .features = PHY_GBIT_FEATURES, |
| .flags = PHY_HAS_INTERRUPT, |
| .config_aneg = &genphy_config_aneg, |
| .read_status = &genphy_read_status, |
| .driver = { |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| /* ATHEROS 8030 */ |
| static struct phy_driver at8030_driver = { |
| .phy_id = 0x004dd076, |
| .name = "Atheros 8030 ethernet", |
| .phy_id_mask = 0xffffffef, |
| .config_init = at803x_config_init, |
| .features = PHY_GBIT_FEATURES, |
| .flags = PHY_HAS_INTERRUPT, |
| .config_aneg = &genphy_config_aneg, |
| .read_status = &genphy_read_status, |
| .driver = { |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static int __init atheros_init(void) |
| { |
| int ret; |
| |
| ret = phy_driver_register(&at8035_driver); |
| if (ret) |
| goto err1; |
| |
| ret = phy_driver_register(&at8030_driver); |
| if (ret) |
| goto err2; |
| |
| return 0; |
| |
| err2: |
| phy_driver_unregister(&at8035_driver); |
| err1: |
| return ret; |
| } |
| |
| static void __exit atheros_exit(void) |
| { |
| phy_driver_unregister(&at8035_driver); |
| phy_driver_unregister(&at8030_driver); |
| } |
| |
| module_init(atheros_init); |
| module_exit(atheros_exit); |
| |
| static struct mdio_device_id __maybe_unused atheros_tbl[] = { |
| { 0x004dd076, 0xffffffef }, |
| { 0x004dd072, 0xffffffef }, |
| { } |
| }; |
| |
| MODULE_DEVICE_TABLE(mdio, atheros_tbl); |