ARM: mx5: Replace clk_register_clkdev with clock DT lookup
Similarly as it was done for mx6q, use a DT lookup in order to make maintainance
task for the clock devices easier.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.txt b/Documentation/devicetree/bindings/clock/imx5-clock.txt
new file mode 100644
index 0000000..04ad478
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx5-clock.txt
@@ -0,0 +1,191 @@
+* Clock bindings for Freescale i.MX5
+
+Required properties:
+- compatible: Should be "fsl,<soc>-ccm" , where <soc> can be imx51 or imx53
+- reg: Address and length of the register set
+- interrupts: Should contain CCM interrupt
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. The following is a full list of i.MX5
+clocks and IDs.
+
+ Clock ID
+ ---------------------------
+ dummy 0
+ ckil 1
+ osc 2
+ ckih1 3
+ ckih2 4
+ ahb 5
+ ipg 6
+ axi_a 7
+ axi_b 8
+ uart_pred 9
+ uart_root 10
+ esdhc_a_pred 11
+ esdhc_b_pred 12
+ esdhc_c_s 13
+ esdhc_d_s 14
+ emi_sel 15
+ emi_slow_podf 16
+ nfc_podf 17
+ ecspi_pred 18
+ ecspi_podf 19
+ usboh3_pred 20
+ usboh3_podf 21
+ usb_phy_pred 22
+ usb_phy_podf 23
+ cpu_podf 24
+ di_pred 25
+ tve_di 26
+ tve_s 27
+ uart1_ipg_gate 28
+ uart1_per_gate 29
+ uart2_ipg_gate 30
+ uart2_per_gate 31
+ uart3_ipg_gate 32
+ uart3_per_gate 33
+ i2c1_gate 34
+ i2c2_gate 35
+ gpt_ipg_gate 36
+ pwm1_ipg_gate 37
+ pwm1_hf_gate 38
+ pwm2_ipg_gate 39
+ pwm2_hf_gate 40
+ gpt_hf_gate 41
+ fec_gate 42
+ usboh3_per_gate 43
+ esdhc1_ipg_gate 44
+ esdhc2_ipg_gate 45
+ esdhc3_ipg_gate 46
+ esdhc4_ipg_gate 47
+ ssi1_ipg_gate 48
+ ssi2_ipg_gate 49
+ ssi3_ipg_gate 50
+ ecspi1_ipg_gate 51
+ ecspi1_per_gate 52
+ ecspi2_ipg_gate 53
+ ecspi2_per_gate 54
+ cspi_ipg_gate 55
+ sdma_gate 56
+ emi_slow_gate 57
+ ipu_s 58
+ ipu_gate 59
+ nfc_gate 60
+ ipu_di1_gate 61
+ vpu_s 62
+ vpu_gate 63
+ vpu_reference_gate 64
+ uart4_ipg_gate 65
+ uart4_per_gate 66
+ uart5_ipg_gate 67
+ uart5_per_gate 68
+ tve_gate 69
+ tve_pred 70
+ esdhc1_per_gate 71
+ esdhc2_per_gate 72
+ esdhc3_per_gate 73
+ esdhc4_per_gate 74
+ usb_phy_gate 75
+ hsi2c_gate 76
+ mipi_hsc1_gate 77
+ mipi_hsc2_gate 78
+ mipi_esc_gate 79
+ mipi_hsp_gate 80
+ ldb_di1_div_3_5 81
+ ldb_di1_div 82
+ ldb_di0_div_3_5 83
+ ldb_di0_div 84
+ ldb_di1_gate 85
+ can2_serial_gate 86
+ can2_ipg_gate 87
+ i2c3_gate 88
+ lp_apm 89
+ periph_apm 90
+ main_bus 91
+ ahb_max 92
+ aips_tz1 93
+ aips_tz2 94
+ tmax1 95
+ tmax2 96
+ tmax3 97
+ spba 98
+ uart_sel 99
+ esdhc_a_sel 100
+ esdhc_b_sel 101
+ esdhc_a_podf 102
+ esdhc_b_podf 103
+ ecspi_sel 104
+ usboh3_sel 105
+ usb_phy_sel 106
+ iim_gate 107
+ usboh3_gate 108
+ emi_fast_gate 109
+ ipu_di0_gate 110
+ gpc_dvfs 111
+ pll1_sw 112
+ pll2_sw 113
+ pll3_sw 114
+ ipu_di0_sel 115
+ ipu_di1_sel 116
+ tve_ext_sel 117
+ mx51_mipi 118
+ pll4_sw 119
+ ldb_di1_sel 120
+ di_pll4_podf 121
+ ldb_di0_sel 122
+ ldb_di0_gate 123
+ usb_phy1_gate 124
+ usb_phy2_gate 125
+ per_lp_apm 126
+ per_pred1 127
+ per_pred2 128
+ per_podf 129
+ per_root 130
+ ssi_apm 131
+ ssi1_root_sel 132
+ ssi2_root_sel 133
+ ssi3_root_sel 134
+ ssi_ext1_sel 135
+ ssi_ext2_sel 136
+ ssi_ext1_com_sel 137
+ ssi_ext2_com_sel 138
+ ssi1_root_pred 139
+ ssi1_root_podf 140
+ ssi2_root_pred 141
+ ssi2_root_podf 142
+ ssi_ext1_pred 143
+ ssi_ext1_podf 144
+ ssi_ext2_pred 145
+ ssi_ext2_podf 146
+ ssi1_root_gate 147
+ ssi2_root_gate 148
+ ssi3_root_gate 149
+ ssi_ext1_gate 150
+ ssi_ext2_gate 151
+ epit1_ipg_gate 152
+ epit1_hf_gate 153
+ epit2_ipg_gate 154
+ epit2_hf_gate 155
+ can_sel 156
+ can1_serial_gate 157
+ can1_ipg_gate 158
+
+Examples (for mx53):
+
+clks: ccm@53fd4000{
+ compatible = "fsl,imx53-ccm";
+ reg = <0x53fd4000 0x4000>;
+ interrupts = <0 71 0x04 0 72 0x04>;
+ #clock-cells = <1>;
+};
+
+can1: can@53fc8000 {
+ compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
+ reg = <0x53fc8000 0x4000>;
+ interrupts = <82>;
+ clocks = <&clks 158>, <&clks 157>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 44c7af7..8cf69c7 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -87,6 +87,8 @@
compatible = "fsl,imx51-esdhc";
reg = <0x70004000 0x4000>;
interrupts = <1>;
+ clocks = <&clks 44>, <&clks 0>, <&clks 71>;
+ clock-names = "ipg", "ahb", "per";
status = "disabled";
};
@@ -94,6 +96,8 @@
compatible = "fsl,imx51-esdhc";
reg = <0x70008000 0x4000>;
interrupts = <2>;
+ clocks = <&clks 45>, <&clks 0>, <&clks 72>;
+ clock-names = "ipg", "ahb", "per";
status = "disabled";
};
@@ -101,6 +105,8 @@
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
reg = <0x7000c000 0x4000>;
interrupts = <33>;
+ clocks = <&clks 32>, <&clks 33>;
+ clock-names = "ipg", "per";
status = "disabled";
};
@@ -110,6 +116,8 @@
compatible = "fsl,imx51-ecspi";
reg = <0x70010000 0x4000>;
interrupts = <36>;
+ clocks = <&clks 51>, <&clks 52>;
+ clock-names = "ipg", "per";
status = "disabled";
};
@@ -117,6 +125,7 @@
compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
reg = <0x70014000 0x4000>;
interrupts = <30>;
+ clocks = <&clks 49>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
@@ -126,6 +135,8 @@
compatible = "fsl,imx51-esdhc";
reg = <0x70020000 0x4000>;
interrupts = <3>;
+ clocks = <&clks 46>, <&clks 0>, <&clks 73>;
+ clock-names = "ipg", "ahb", "per";
status = "disabled";
};
@@ -133,6 +144,8 @@
compatible = "fsl,imx51-esdhc";
reg = <0x70024000 0x4000>;
interrupts = <4>;
+ clocks = <&clks 47>, <&clks 0>, <&clks 74>;
+ clock-names = "ipg", "ahb", "per";
status = "disabled";
};
};
@@ -209,12 +222,14 @@
compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
reg = <0x73f98000 0x4000>;
interrupts = <58>;
+ clocks = <&clks 0>;
};
wdog@73f9c000 { /* WDOG2 */
compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
reg = <0x73f9c000 0x4000>;
interrupts = <59>;
+ clocks = <&clks 0>;
status = "disabled";
};
@@ -398,6 +413,8 @@
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
reg = <0x73fbc000 0x4000>;
interrupts = <31>;
+ clocks = <&clks 28>, <&clks 29>;
+ clock-names = "ipg", "per";
status = "disabled";
};
@@ -405,8 +422,17 @@
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
reg = <0x73fc0000 0x4000>;
interrupts = <32>;
+ clocks = <&clks 30>, <&clks 31>;
+ clock-names = "ipg", "per";
status = "disabled";
};
+
+ clks: ccm@73fd4000{
+ compatible = "fsl,imx51-ccm";
+ reg = <0x73fd4000 0x4000>;
+ interrupts = <0 71 0x04 0 72 0x04>;
+ #clock-cells = <1>;
+ };
};
aips@80000000 { /* AIPS2 */
@@ -422,6 +448,8 @@
compatible = "fsl,imx51-ecspi";
reg = <0x83fac000 0x4000>;
interrupts = <37>;
+ clocks = <&clks 53>, <&clks 54>;
+ clock-names = "ipg", "per";
status = "disabled";
};
@@ -429,6 +457,8 @@
compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
reg = <0x83fb0000 0x4000>;
interrupts = <6>;
+ clocks = <&clks 56>, <&clks 56>;
+ clock-names = "ipg", "ahb";
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
};
@@ -438,6 +468,8 @@
compatible = "fsl,imx51-cspi", "fsl,imx35-cspi";
reg = <0x83fc0000 0x4000>;
interrupts = <38>;
+ clocks = <&clks 55>, <&clks 0>;
+ clock-names = "ipg", "per";
status = "disabled";
};
@@ -447,6 +479,7 @@
compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
reg = <0x83fc4000 0x4000>;
interrupts = <63>;
+ clocks = <&clks 35>;
status = "disabled";
};
@@ -456,6 +489,7 @@
compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
reg = <0x83fc8000 0x4000>;
interrupts = <62>;
+ clocks = <&clks 34>;
status = "disabled";
};
@@ -463,6 +497,7 @@
compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
reg = <0x83fcc000 0x4000>;
interrupts = <29>;
+ clocks = <&clks 48>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
@@ -478,6 +513,7 @@
compatible = "fsl,imx51-nand";
reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>;
interrupts = <8>;
+ clocks = <&clks 60>;
status = "disabled";
};
@@ -485,6 +521,7 @@
compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
reg = <0x83fe8000 0x4000>;
interrupts = <96>;
+ clocks = <&clks 50>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <47 46 37 35>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
@@ -494,6 +531,8 @@
compatible = "fsl,imx51-fec", "fsl,imx27-fec";
reg = <0x83fec000 0x4000>;
interrupts = <87>;
+ clocks = <&clks 42>, <&clks 42>, <&clks 42>;
+ clock-names = "ipg", "ahb", "ptp";
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 8317a17..3be2772 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -92,6 +92,8 @@
compatible = "fsl,imx53-esdhc";
reg = <0x50004000 0x4000>;
interrupts = <1>;
+ clocks = <&clks 44>, <&clks 0>, <&clks 71>;
+ clock-names = "ipg", "ahb", "per";
status = "disabled";
};
@@ -99,6 +101,8 @@
compatible = "fsl,imx53-esdhc";
reg = <0x50008000 0x4000>;
interrupts = <2>;
+ clocks = <&clks 45>, <&clks 0>, <&clks 72>;
+ clock-names = "ipg", "ahb", "per";
status = "disabled";
};
@@ -106,6 +110,8 @@
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x5000c000 0x4000>;
interrupts = <33>;
+ clocks = <&clks 32>, <&clks 33>;
+ clock-names = "ipg", "per";
status = "disabled";
};
@@ -115,6 +121,8 @@
compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
reg = <0x50010000 0x4000>;
interrupts = <36>;
+ clocks = <&clks 51>, <&clks 52>;
+ clock-names = "ipg", "per";
status = "disabled";
};
@@ -122,6 +130,7 @@
compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
reg = <0x50014000 0x4000>;
interrupts = <30>;
+ clocks = <&clks 49>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
@@ -131,6 +140,8 @@
compatible = "fsl,imx53-esdhc";
reg = <0x50020000 0x4000>;
interrupts = <3>;
+ clocks = <&clks 46>, <&clks 0>, <&clks 73>;
+ clock-names = "ipg", "ahb", "per";
status = "disabled";
};
@@ -138,6 +149,8 @@
compatible = "fsl,imx53-esdhc";
reg = <0x50024000 0x4000>;
interrupts = <4>;
+ clocks = <&clks 47>, <&clks 0>, <&clks 74>;
+ clock-names = "ipg", "ahb", "per";
status = "disabled";
};
};
@@ -214,12 +227,14 @@
compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
reg = <0x53f98000 0x4000>;
interrupts = <58>;
+ clocks = <&clks 0>;
};
wdog@53f9c000 { /* WDOG2 */
compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
reg = <0x53f9c000 0x4000>;
interrupts = <59>;
+ clocks = <&clks 0>;
status = "disabled";
};
@@ -382,6 +397,8 @@
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x53fbc000 0x4000>;
interrupts = <31>;
+ clocks = <&clks 28>, <&clks 29>;
+ clock-names = "ipg", "per";
status = "disabled";
};
@@ -389,6 +406,8 @@
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x53fc0000 0x4000>;
interrupts = <32>;
+ clocks = <&clks 30>, <&clks 31>;
+ clock-names = "ipg", "per";
status = "disabled";
};
@@ -396,6 +415,8 @@
compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
reg = <0x53fc8000 0x4000>;
interrupts = <82>;
+ clocks = <&clks 158>, <&clks 157>;
+ clock-names = "ipg", "per";
status = "disabled";
};
@@ -403,9 +424,18 @@
compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
reg = <0x53fcc000 0x4000>;
interrupts = <83>;
+ clocks = <&clks 158>, <&clks 157>;
+ clock-names = "ipg", "per";
status = "disabled";
};
+ clks: ccm@53fd4000{
+ compatible = "fsl,imx53-ccm";
+ reg = <0x53fd4000 0x4000>;
+ interrupts = <0 71 0x04 0 72 0x04>;
+ #clock-cells = <1>;
+ };
+
gpio5: gpio@53fdc000 {
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
reg = <0x53fdc000 0x4000>;
@@ -442,6 +472,7 @@
compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
reg = <0x53fec000 0x4000>;
interrupts = <64>;
+ clocks = <&clks 88>;
status = "disabled";
};
@@ -449,6 +480,8 @@
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x53ff0000 0x4000>;
interrupts = <13>;
+ clocks = <&clks 65>, <&clks 66>;
+ clock-names = "ipg", "per";
status = "disabled";
};
};
@@ -464,6 +497,8 @@
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x63f90000 0x4000>;
interrupts = <86>;
+ clocks = <&clks 67>, <&clks 68>;
+ clock-names = "ipg", "per";
status = "disabled";
};
@@ -473,6 +508,8 @@
compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
reg = <0x63fac000 0x4000>;
interrupts = <37>;
+ clocks = <&clks 53>, <&clks 54>;
+ clock-names = "ipg", "per";
status = "disabled";
};
@@ -480,6 +517,8 @@
compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
reg = <0x63fb0000 0x4000>;
interrupts = <6>;
+ clocks = <&clks 56>, <&clks 56>;
+ clock-names = "ipg", "ahb";
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
};
@@ -489,6 +528,8 @@
compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
reg = <0x63fc0000 0x4000>;
interrupts = <38>;
+ clocks = <&clks 55>, <&clks 0>;
+ clock-names = "ipg", "per";
status = "disabled";
};
@@ -498,6 +539,7 @@
compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
reg = <0x63fc4000 0x4000>;
interrupts = <63>;
+ clocks = <&clks 35>;
status = "disabled";
};
@@ -507,6 +549,7 @@
compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
reg = <0x63fc8000 0x4000>;
interrupts = <62>;
+ clocks = <&clks 34>;
status = "disabled";
};
@@ -514,6 +557,7 @@
compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
reg = <0x63fcc000 0x4000>;
interrupts = <29>;
+ clocks = <&clks 48>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
@@ -529,6 +573,7 @@
compatible = "fsl,imx53-nand";
reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>;
interrupts = <8>;
+ clocks = <&clks 60>;
status = "disabled";
};
@@ -536,6 +581,7 @@
compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
reg = <0x63fe8000 0x4000>;
interrupts = <96>;
+ clocks = <&clks 50>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <47 46 45 44>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
@@ -545,6 +591,8 @@
compatible = "fsl,imx53-fec", "fsl,imx25-fec";
reg = <0x63fec000 0x4000>;
interrupts = <87>;
+ clocks = <&clks 42>, <&clks 42>, <&clks 42>;
+ clock-names = "ipg", "ahb", "ptp";
status = "disabled";
};
};
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index 73b241d..e8c0473 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -87,6 +87,7 @@
};
static struct clk *clk[clk_max];
+static struct clk_onecell_data clk_data;
static void __init mx5_clocks_common_init(unsigned long rate_ckil,
unsigned long rate_osc, unsigned long rate_ckih1,
@@ -318,6 +319,7 @@
unsigned long rate_ckih1, unsigned long rate_ckih2)
{
int i;
+ struct device_node *np;
clk[pll1_sw] = imx_clk_pllv2("pll1_sw", "osc", MX51_DPLL1_BASE);
clk[pll2_sw] = imx_clk_pllv2("pll2_sw", "osc", MX51_DPLL2_BASE);
@@ -346,6 +348,11 @@
pr_err("i.MX51 clk %d: register failed with %ld\n",
i, PTR_ERR(clk[i]));
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx51-ccm");
+ clk_data.clks = clk;
+ clk_data.clk_num = ARRAY_SIZE(clk);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+
mx5_clocks_common_init(rate_ckil, rate_osc, rate_ckih1, rate_ckih2);
clk_register_clkdev(clk[hsi2c_gate], NULL, "imx21-i2c.2");
@@ -368,10 +375,6 @@
clk_register_clkdev(clk[esdhc4_ipg_gate], "ipg", "sdhci-esdhc-imx51.3");
clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx51.3");
clk_register_clkdev(clk[esdhc4_per_gate], "per", "sdhci-esdhc-imx51.3");
- clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "83fcc000.ssi");
- clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "70014000.ssi");
- clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "83fe8000.ssi");
- clk_register_clkdev(clk[nfc_gate], NULL, "83fdb000.nand");
/* set the usboh3 parent to pll2_sw */
clk_set_parent(clk[usboh3_sel], clk[pll2_sw]);
@@ -395,6 +398,7 @@
{
int i;
unsigned long r;
+ struct device_node *np;
clk[pll1_sw] = imx_clk_pllv2("pll1_sw", "osc", MX53_DPLL1_BASE);
clk[pll2_sw] = imx_clk_pllv2("pll2_sw", "osc", MX53_DPLL2_BASE);
@@ -439,6 +443,11 @@
pr_err("i.MX53 clk %d: register failed with %ld\n",
i, PTR_ERR(clk[i]));
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx53-ccm");
+ clk_data.clks = clk;
+ clk_data.clk_num = ARRAY_SIZE(clk);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+
mx5_clocks_common_init(rate_ckil, rate_osc, rate_ckih1, rate_ckih2);
clk_register_clkdev(clk[vpu_gate], NULL, "imx53-vpu.0");
@@ -461,15 +470,6 @@
clk_register_clkdev(clk[esdhc4_ipg_gate], "ipg", "sdhci-esdhc-imx53.3");
clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx53.3");
clk_register_clkdev(clk[esdhc4_per_gate], "per", "sdhci-esdhc-imx53.3");
- clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "63fcc000.ssi");
- clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "50014000.ssi");
- clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "63fd0000.ssi");
- clk_register_clkdev(clk[nfc_gate], NULL, "63fdb000.nand");
- clk_register_clkdev(clk[can1_ipg_gate], "ipg", "53fc8000.can");
- clk_register_clkdev(clk[can1_serial_gate], "per", "53fc8000.can");
- clk_register_clkdev(clk[can2_ipg_gate], "ipg", "53fcc000.can");
- clk_register_clkdev(clk[can2_serial_gate], "per", "53fcc000.can");
- clk_register_clkdev(clk[dummy], NULL, "53fa4000.rtc");
/* set SDHC root clock to 200MHZ*/
clk_set_rate(clk[esdhc_a_podf], 200000000);
diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c
index 5074299..5ffa40c 100644
--- a/arch/arm/mach-imx/imx51-dt.c
+++ b/arch/arm/mach-imx/imx51-dt.c
@@ -19,35 +19,9 @@
#include "common.h"
#include "mx51.h"
-/*
- * Lookup table for attaching a specific name and platform_data pointer to
- * devices as they get created by of_platform_populate(). Ideally this table
- * would not exist, but the current clock implementation depends on some devices
- * having a specific name.
- */
-static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = {
- OF_DEV_AUXDATA("fsl,imx51-uart", MX51_UART1_BASE_ADDR, "imx21-uart.0", NULL),
- OF_DEV_AUXDATA("fsl,imx51-uart", MX51_UART2_BASE_ADDR, "imx21-uart.1", NULL),
- OF_DEV_AUXDATA("fsl,imx51-uart", MX51_UART3_BASE_ADDR, "imx21-uart.2", NULL),
- OF_DEV_AUXDATA("fsl,imx51-fec", MX51_FEC_BASE_ADDR, "imx27-fec.0", NULL),
- OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC1_BASE_ADDR, "sdhci-esdhc-imx51.0", NULL),
- OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC2_BASE_ADDR, "sdhci-esdhc-imx51.1", NULL),
- OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC3_BASE_ADDR, "sdhci-esdhc-imx51.2", NULL),
- OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC4_BASE_ADDR, "sdhci-esdhc-imx51.3", NULL),
- OF_DEV_AUXDATA("fsl,imx51-ecspi", MX51_ECSPI1_BASE_ADDR, "imx51-ecspi.0", NULL),
- OF_DEV_AUXDATA("fsl,imx51-ecspi", MX51_ECSPI2_BASE_ADDR, "imx51-ecspi.1", NULL),
- OF_DEV_AUXDATA("fsl,imx51-cspi", MX51_CSPI_BASE_ADDR, "imx35-cspi.0", NULL),
- OF_DEV_AUXDATA("fsl,imx51-i2c", MX51_I2C1_BASE_ADDR, "imx21-i2c.0", NULL),
- OF_DEV_AUXDATA("fsl,imx51-i2c", MX51_I2C2_BASE_ADDR, "imx21-i2c.1", NULL),
- OF_DEV_AUXDATA("fsl,imx51-sdma", MX51_SDMA_BASE_ADDR, "imx35-sdma", NULL),
- OF_DEV_AUXDATA("fsl,imx51-wdt", MX51_WDOG1_BASE_ADDR, "imx2-wdt.0", NULL),
- { /* sentinel */ }
-};
-
static void __init imx51_dt_init(void)
{
- of_platform_populate(NULL, of_default_bus_match_table,
- imx51_auxdata_lookup, NULL);
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static void __init imx51_timer_init(void)
diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c
index e71e6261..860284d 100644
--- a/arch/arm/mach-imx/mach-imx53.c
+++ b/arch/arm/mach-imx/mach-imx53.c
@@ -23,34 +23,6 @@
#include "common.h"
#include "mx53.h"
-/*
- * Lookup table for attaching a specific name and platform_data pointer to
- * devices as they get created by of_platform_populate(). Ideally this table
- * would not exist, but the current clock implementation depends on some devices
- * having a specific name.
- */
-static const struct of_dev_auxdata imx53_auxdata_lookup[] __initconst = {
- OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART1_BASE_ADDR, "imx21-uart.0", NULL),
- OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART2_BASE_ADDR, "imx21-uart.1", NULL),
- OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART3_BASE_ADDR, "imx21-uart.2", NULL),
- OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART4_BASE_ADDR, "imx21-uart.3", NULL),
- OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART5_BASE_ADDR, "imx21-uart.4", NULL),
- OF_DEV_AUXDATA("fsl,imx53-fec", MX53_FEC_BASE_ADDR, "imx25-fec.0", NULL),
- OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC1_BASE_ADDR, "sdhci-esdhc-imx53.0", NULL),
- OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC2_BASE_ADDR, "sdhci-esdhc-imx53.1", NULL),
- OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC3_BASE_ADDR, "sdhci-esdhc-imx53.2", NULL),
- OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC4_BASE_ADDR, "sdhci-esdhc-imx53.3", NULL),
- OF_DEV_AUXDATA("fsl,imx53-ecspi", MX53_ECSPI1_BASE_ADDR, "imx51-ecspi.0", NULL),
- OF_DEV_AUXDATA("fsl,imx53-ecspi", MX53_ECSPI2_BASE_ADDR, "imx51-ecspi.1", NULL),
- OF_DEV_AUXDATA("fsl,imx53-cspi", MX53_CSPI_BASE_ADDR, "imx35-cspi.0", NULL),
- OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C1_BASE_ADDR, "imx21-i2c.0", NULL),
- OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C2_BASE_ADDR, "imx21-i2c.1", NULL),
- OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C3_BASE_ADDR, "imx21-i2c.2", NULL),
- OF_DEV_AUXDATA("fsl,imx53-sdma", MX53_SDMA_BASE_ADDR, "imx35-sdma", NULL),
- OF_DEV_AUXDATA("fsl,imx53-wdt", MX53_WDOG1_BASE_ADDR, "imx2-wdt.0", NULL),
- { /* sentinel */ }
-};
-
static void __init imx53_qsb_init(void)
{
struct clk *clk;
@@ -69,8 +41,7 @@
if (of_machine_is_compatible("fsl,imx53-qsb"))
imx53_qsb_init();
- of_platform_populate(NULL, of_default_bus_match_table,
- imx53_auxdata_lookup, NULL);
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static void __init imx53_timer_init(void)