net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)

High-availability Seamless Redundancy ("HSR") provides instant failover
redundancy for Ethernet networks. It requires a special network topology where
all nodes are connected in a ring (each node having two physical network
interfaces). It is suited for applications that demand high availability and
very short reaction time.

HSR acts on the Ethernet layer, using a registered Ethernet protocol type to
send special HSR frames in both directions over the ring. The driver creates
virtual network interfaces that can be used just like any ordinary Linux
network interface, for IP/TCP/UDP traffic etc. All nodes in the network ring
must be HSR capable.

This code is a "best effort" to comply with the HSR standard as described in
IEC 62439-3:2010 (HSRv0).

Signed-off-by: Arvid Brodin <arvid.brodin@xdin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/net/hsr/hsr_main.h b/net/hsr/hsr_main.h
new file mode 100644
index 0000000..56fe060
--- /dev/null
+++ b/net/hsr/hsr_main.h
@@ -0,0 +1,166 @@
+/* Copyright 2011-2013 Autronica Fire and Security AS
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * Author(s):
+ *	2011-2013 Arvid Brodin, arvid.brodin@xdin.com
+ */
+
+#ifndef _HSR_PRIVATE_H
+#define _HSR_PRIVATE_H
+
+#include <linux/netdevice.h>
+#include <linux/list.h>
+
+
+/* Time constants as specified in the HSR specification (IEC-62439-3 2010)
+ * Table 8.
+ * All values in milliseconds.
+ */
+#define HSR_LIFE_CHECK_INTERVAL		 2000 /* ms */
+#define HSR_NODE_FORGET_TIME		60000 /* ms */
+#define HSR_ANNOUNCE_INTERVAL		  100 /* ms */
+
+
+/* By how much may slave1 and slave2 timestamps of latest received frame from
+ * each node differ before we notify of communication problem?
+ */
+#define MAX_SLAVE_DIFF			 3000 /* ms */
+
+
+/* How often shall we check for broken ring and remove node entries older than
+ * HSR_NODE_FORGET_TIME?
+ */
+#define PRUNE_PERIOD			 3000 /* ms */
+
+
+#define HSR_TLV_ANNOUNCE		   22
+#define HSR_TLV_LIFE_CHECK		   23
+
+
+/* HSR Tag.
+ * As defined in IEC-62439-3:2010, the HSR tag is really { ethertype = 0x88FB,
+ * path, LSDU_size, sequence Nr }. But we let eth_header() create { h_dest,
+ * h_source, h_proto = 0x88FB }, and add { path, LSDU_size, sequence Nr,
+ * encapsulated protocol } instead.
+ */
+#define HSR_TAGLEN	6
+
+/* Field names below as defined in the IEC:2010 standard for HSR. */
+struct hsr_tag {
+	__be16		path_and_LSDU_size;
+	__be16		sequence_nr;
+	__be16		encap_proto;
+} __packed;
+
+
+/* The helper functions below assumes that 'path' occupies the 4 most
+ * significant bits of the 16-bit field shared by 'path' and 'LSDU_size' (or
+ * equivalently, the 4 most significant bits of HSR tag byte 14).
+ *
+ * This is unclear in the IEC specification; its definition of MAC addresses
+ * indicates the spec is written with the least significant bit first (to the
+ * left). This, however, would mean that the LSDU field would be split in two
+ * with the path field in-between, which seems strange. I'm guessing the MAC
+ * address definition is in error.
+ */
+static inline u16 get_hsr_tag_path(struct hsr_tag *ht)
+{
+	return ntohs(ht->path_and_LSDU_size) >> 12;
+}
+
+static inline u16 get_hsr_tag_LSDU_size(struct hsr_tag *ht)
+{
+	return ntohs(ht->path_and_LSDU_size) & 0x0FFF;
+}
+
+static inline void set_hsr_tag_path(struct hsr_tag *ht, u16 path)
+{
+	ht->path_and_LSDU_size = htons(
+			(ntohs(ht->path_and_LSDU_size) & 0x0FFF) | (path << 12));
+}
+
+static inline void set_hsr_tag_LSDU_size(struct hsr_tag *ht, u16 LSDU_size)
+{
+	ht->path_and_LSDU_size = htons(
+			(ntohs(ht->path_and_LSDU_size) & 0xF000) |
+			(LSDU_size & 0x0FFF));
+}
+
+struct hsr_ethhdr {
+	struct ethhdr	ethhdr;
+	struct hsr_tag	hsr_tag;
+} __packed;
+
+
+/* HSR Supervision Frame data types.
+ * Field names as defined in the IEC:2010 standard for HSR.
+ */
+struct hsr_sup_tag {
+	__be16		path_and_HSR_Ver;
+	__be16		sequence_nr;
+	__u8		HSR_TLV_Type;
+	__u8		HSR_TLV_Length;
+} __packed;
+
+struct hsr_sup_payload {
+	unsigned char	MacAddressA[ETH_ALEN];
+} __packed;
+
+static inline u16 get_hsr_stag_path(struct hsr_sup_tag *hst)
+{
+	return get_hsr_tag_path((struct hsr_tag *) hst);
+}
+
+static inline u16 get_hsr_stag_HSR_ver(struct hsr_sup_tag *hst)
+{
+	return get_hsr_tag_LSDU_size((struct hsr_tag *) hst);
+}
+
+static inline void set_hsr_stag_path(struct hsr_sup_tag *hst, u16 path)
+{
+	set_hsr_tag_path((struct hsr_tag *) hst, path);
+}
+
+static inline void set_hsr_stag_HSR_Ver(struct hsr_sup_tag *hst, u16 HSR_Ver)
+{
+	set_hsr_tag_LSDU_size((struct hsr_tag *) hst, HSR_Ver);
+}
+
+struct hsr_ethhdr_sp {
+	struct ethhdr		ethhdr;
+	struct hsr_sup_tag	hsr_sup;
+} __packed;
+
+
+enum hsr_dev_idx {
+	HSR_DEV_NONE = -1,
+	HSR_DEV_SLAVE_A = 0,
+	HSR_DEV_SLAVE_B,
+	HSR_DEV_MASTER,
+};
+#define HSR_MAX_SLAVE	(HSR_DEV_SLAVE_B + 1)
+#define HSR_MAX_DEV	(HSR_DEV_MASTER + 1)
+
+struct hsr_priv {
+	struct list_head	hsr_list;	/* List of hsr devices */
+	struct rcu_head		rcu_head;
+	struct net_device	*dev;
+	struct net_device	*slave[HSR_MAX_SLAVE];
+	struct list_head	node_db;	/* Other HSR nodes */
+	struct list_head	self_node_db;	/* MACs of slaves */
+	struct timer_list	announce_timer;	/* Supervision frame dispatch */
+	int announce_count;
+	u16 sequence_nr;
+	spinlock_t seqnr_lock;			/* locking for sequence_nr */
+	unsigned char		sup_multicast_addr[ETH_ALEN];
+};
+
+void register_hsr_master(struct hsr_priv *hsr_priv);
+void unregister_hsr_master(struct hsr_priv *hsr_priv);
+bool is_hsr_slave(struct net_device *dev);
+
+#endif /*  _HSR_PRIVATE_H */