i40e: Add NPAR BW get and set functions
We need to be able to get, set and commit permanently the NPAR
partition BW configuration through configfs. These are necessary
precursor functions for that feature.
Also update the copyright year.
Change-ID: I9d5ca160a9288145f1dd2042994028679fff55f3
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Jim Young <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index a8824c7..e3e48c3 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -7254,6 +7254,128 @@
}
/**
+ * i40e_get_npar_bw_setting - Retrieve BW settings for this PF partition
+ * @pf: board private structure
+ **/
+i40e_status i40e_get_npar_bw_setting(struct i40e_pf *pf)
+{
+ i40e_status status;
+ bool min_valid, max_valid;
+ u32 max_bw, min_bw;
+
+ status = i40e_read_bw_from_alt_ram(&pf->hw, &max_bw, &min_bw,
+ &min_valid, &max_valid);
+
+ if (!status) {
+ if (min_valid)
+ pf->npar_min_bw = min_bw;
+ if (max_valid)
+ pf->npar_max_bw = max_bw;
+ }
+
+ return status;
+}
+
+/**
+ * i40e_set_npar_bw_setting - Set BW settings for this PF partition
+ * @pf: board private structure
+ **/
+i40e_status i40e_set_npar_bw_setting(struct i40e_pf *pf)
+{
+ struct i40e_aqc_configure_partition_bw_data bw_data;
+ i40e_status status;
+
+ /* Set the valid bit for this pf */
+ bw_data.pf_valid_bits = cpu_to_le16(1 << pf->hw.pf_id);
+ bw_data.max_bw[pf->hw.pf_id] = pf->npar_max_bw & I40E_ALT_BW_VALUE_MASK;
+ bw_data.min_bw[pf->hw.pf_id] = pf->npar_min_bw & I40E_ALT_BW_VALUE_MASK;
+
+ /* Set the new bandwidths */
+ status = i40e_aq_configure_partition_bw(&pf->hw, &bw_data, NULL);
+
+ return status;
+}
+
+/**
+ * i40e_commit_npar_bw_setting - Commit BW settings for this PF partition
+ * @pf: board private structure
+ **/
+i40e_status i40e_commit_npar_bw_setting(struct i40e_pf *pf)
+{
+ /* Commit temporary BW setting to permanent NVM image */
+ enum i40e_admin_queue_err last_aq_status;
+ i40e_status ret;
+ u16 nvm_word;
+
+ if (pf->hw.partition_id != 1) {
+ dev_info(&pf->pdev->dev,
+ "Commit BW only works on partition 1! This is partition %d",
+ pf->hw.partition_id);
+ ret = I40E_NOT_SUPPORTED;
+ goto bw_commit_out;
+ }
+
+ /* Acquire NVM for read access */
+ ret = i40e_acquire_nvm(&pf->hw, I40E_RESOURCE_READ);
+ last_aq_status = pf->hw.aq.asq_last_status;
+ if (ret) {
+ dev_info(&pf->pdev->dev,
+ "Cannot acquire NVM for read access, err %d: aq_err %d\n",
+ ret, last_aq_status);
+ goto bw_commit_out;
+ }
+
+ /* Read word 0x10 of NVM - SW compatibility word 1 */
+ ret = i40e_aq_read_nvm(&pf->hw,
+ I40E_SR_NVM_CONTROL_WORD,
+ 0x10, sizeof(nvm_word), &nvm_word,
+ false, NULL);
+ /* Save off last admin queue command status before releasing
+ * the NVM
+ */
+ last_aq_status = pf->hw.aq.asq_last_status;
+ i40e_release_nvm(&pf->hw);
+ if (ret) {
+ dev_info(&pf->pdev->dev, "NVM read error, err %d aq_err %d\n",
+ ret, last_aq_status);
+ goto bw_commit_out;
+ }
+
+ /* Wait a bit for NVM release to complete */
+ msleep(50);
+
+ /* Acquire NVM for write access */
+ ret = i40e_acquire_nvm(&pf->hw, I40E_RESOURCE_WRITE);
+ last_aq_status = pf->hw.aq.asq_last_status;
+ if (ret) {
+ dev_info(&pf->pdev->dev,
+ "Cannot acquire NVM for write access, err %d: aq_err %d\n",
+ ret, last_aq_status);
+ goto bw_commit_out;
+ }
+ /* Write it back out unchanged to initiate update NVM,
+ * which will force a write of the shadow (alt) RAM to
+ * the NVM - thus storing the bandwidth values permanently.
+ */
+ ret = i40e_aq_update_nvm(&pf->hw,
+ I40E_SR_NVM_CONTROL_WORD,
+ 0x10, sizeof(nvm_word),
+ &nvm_word, true, NULL);
+ /* Save off last admin queue command status before releasing
+ * the NVM
+ */
+ last_aq_status = pf->hw.aq.asq_last_status;
+ i40e_release_nvm(&pf->hw);
+ if (ret)
+ dev_info(&pf->pdev->dev,
+ "BW settings NOT SAVED, err %d aq_err %d\n",
+ ret, last_aq_status);
+bw_commit_out:
+
+ return ret;
+}
+
+/**
* i40e_sw_init - Initialize general software structures (struct i40e_pf)
* @pf: board private structure to initialize
*
@@ -7306,6 +7428,13 @@
if (pf->hw.func_caps.npar_enable || pf->hw.func_caps.mfp_mode_1) {
pf->flags |= I40E_FLAG_MFP_ENABLED;
dev_info(&pf->pdev->dev, "MFP mode Enabled\n");
+ if (i40e_get_npar_bw_setting(pf))
+ dev_warn(&pf->pdev->dev,
+ "Could not get NPAR bw settings\n");
+ else
+ dev_info(&pf->pdev->dev,
+ "Min BW = %8.8x, Max BW = %8.8x\n",
+ pf->npar_min_bw, pf->npar_max_bw);
}
/* FW/NVM is not yet fixed in this regard */