| /* |
| * Copyright (c) 2005-2010 Brocade Communications Systems, Inc. |
| * All rights reserved |
| * www.brocade.com |
| * |
| * Linux driver for Brocade Fibre Channel Host Bus Adapter. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License (GPL) Version 2 as |
| * published by the Free Software Foundation |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| */ |
| |
| #include "bfad_drv.h" |
| #include "bfa_ioc.h" |
| #include "bfi_reg.h" |
| #include "bfa_defs.h" |
| |
| BFA_TRC_FILE(CNA, IOC_CT); |
| |
| #define bfa_ioc_ct_sync_pos(__ioc) \ |
| ((uint32_t) (1 << bfa_ioc_pcifn(__ioc))) |
| #define BFA_IOC_SYNC_REQD_SH 16 |
| #define bfa_ioc_ct_get_sync_ackd(__val) (__val & 0x0000ffff) |
| #define bfa_ioc_ct_clear_sync_ackd(__val) (__val & 0xffff0000) |
| #define bfa_ioc_ct_get_sync_reqd(__val) (__val >> BFA_IOC_SYNC_REQD_SH) |
| #define bfa_ioc_ct_sync_reqd_pos(__ioc) \ |
| (bfa_ioc_ct_sync_pos(__ioc) << BFA_IOC_SYNC_REQD_SH) |
| |
| /* |
| * forward declarations |
| */ |
| static bfa_boolean_t bfa_ioc_ct_firmware_lock(struct bfa_ioc_s *ioc); |
| static void bfa_ioc_ct_firmware_unlock(struct bfa_ioc_s *ioc); |
| static void bfa_ioc_ct_notify_fail(struct bfa_ioc_s *ioc); |
| static void bfa_ioc_ct_ownership_reset(struct bfa_ioc_s *ioc); |
| static bfa_boolean_t bfa_ioc_ct_sync_start(struct bfa_ioc_s *ioc); |
| static void bfa_ioc_ct_sync_join(struct bfa_ioc_s *ioc); |
| static void bfa_ioc_ct_sync_leave(struct bfa_ioc_s *ioc); |
| static void bfa_ioc_ct_sync_ack(struct bfa_ioc_s *ioc); |
| static bfa_boolean_t bfa_ioc_ct_sync_complete(struct bfa_ioc_s *ioc); |
| |
| static struct bfa_ioc_hwif_s hwif_ct; |
| static struct bfa_ioc_hwif_s hwif_ct2; |
| |
| /* |
| * Return true if firmware of current driver matches the running firmware. |
| */ |
| static bfa_boolean_t |
| bfa_ioc_ct_firmware_lock(struct bfa_ioc_s *ioc) |
| { |
| enum bfi_ioc_state ioc_fwstate; |
| u32 usecnt; |
| struct bfi_ioc_image_hdr_s fwhdr; |
| |
| /* |
| * If bios boot (flash based) -- do not increment usage count |
| */ |
| if (bfa_cb_image_get_size(bfa_ioc_asic_gen(ioc)) < |
| BFA_IOC_FWIMG_MINSZ) |
| return BFA_TRUE; |
| |
| bfa_ioc_sem_get(ioc->ioc_regs.ioc_usage_sem_reg); |
| usecnt = readl(ioc->ioc_regs.ioc_usage_reg); |
| |
| /* |
| * If usage count is 0, always return TRUE. |
| */ |
| if (usecnt == 0) { |
| writel(1, ioc->ioc_regs.ioc_usage_reg); |
| readl(ioc->ioc_regs.ioc_usage_sem_reg); |
| writel(1, ioc->ioc_regs.ioc_usage_sem_reg); |
| writel(0, ioc->ioc_regs.ioc_fail_sync); |
| bfa_trc(ioc, usecnt); |
| return BFA_TRUE; |
| } |
| |
| ioc_fwstate = readl(ioc->ioc_regs.ioc_fwstate); |
| bfa_trc(ioc, ioc_fwstate); |
| |
| /* |
| * Use count cannot be non-zero and chip in uninitialized state. |
| */ |
| WARN_ON(ioc_fwstate == BFI_IOC_UNINIT); |
| |
| /* |
| * Check if another driver with a different firmware is active |
| */ |
| bfa_ioc_fwver_get(ioc, &fwhdr); |
| if (!bfa_ioc_fwver_cmp(ioc, &fwhdr)) { |
| readl(ioc->ioc_regs.ioc_usage_sem_reg); |
| writel(1, ioc->ioc_regs.ioc_usage_sem_reg); |
| bfa_trc(ioc, usecnt); |
| return BFA_FALSE; |
| } |
| |
| /* |
| * Same firmware version. Increment the reference count. |
| */ |
| usecnt++; |
| writel(usecnt, ioc->ioc_regs.ioc_usage_reg); |
| readl(ioc->ioc_regs.ioc_usage_sem_reg); |
| writel(1, ioc->ioc_regs.ioc_usage_sem_reg); |
| bfa_trc(ioc, usecnt); |
| return BFA_TRUE; |
| } |
| |
| static void |
| bfa_ioc_ct_firmware_unlock(struct bfa_ioc_s *ioc) |
| { |
| u32 usecnt; |
| |
| /* |
| * If bios boot (flash based) -- do not decrement usage count |
| */ |
| if (bfa_cb_image_get_size(bfa_ioc_asic_gen(ioc)) < |
| BFA_IOC_FWIMG_MINSZ) |
| return; |
| |
| /* |
| * decrement usage count |
| */ |
| bfa_ioc_sem_get(ioc->ioc_regs.ioc_usage_sem_reg); |
| usecnt = readl(ioc->ioc_regs.ioc_usage_reg); |
| WARN_ON(usecnt <= 0); |
| |
| usecnt--; |
| writel(usecnt, ioc->ioc_regs.ioc_usage_reg); |
| bfa_trc(ioc, usecnt); |
| |
| readl(ioc->ioc_regs.ioc_usage_sem_reg); |
| writel(1, ioc->ioc_regs.ioc_usage_sem_reg); |
| } |
| |
| /* |
| * Notify other functions on HB failure. |
| */ |
| static void |
| bfa_ioc_ct_notify_fail(struct bfa_ioc_s *ioc) |
| { |
| if (bfa_ioc_is_cna(ioc)) { |
| writel(__FW_INIT_HALT_P, ioc->ioc_regs.ll_halt); |
| writel(__FW_INIT_HALT_P, ioc->ioc_regs.alt_ll_halt); |
| /* Wait for halt to take effect */ |
| readl(ioc->ioc_regs.ll_halt); |
| readl(ioc->ioc_regs.alt_ll_halt); |
| } else { |
| writel(~0U, ioc->ioc_regs.err_set); |
| readl(ioc->ioc_regs.err_set); |
| } |
| } |
| |
| /* |
| * Host to LPU mailbox message addresses |
| */ |
| static struct { u32 hfn_mbox, lpu_mbox, hfn_pgn; } ct_fnreg[] = { |
| { HOSTFN0_LPU_MBOX0_0, LPU_HOSTFN0_MBOX0_0, HOST_PAGE_NUM_FN0 }, |
| { HOSTFN1_LPU_MBOX0_8, LPU_HOSTFN1_MBOX0_8, HOST_PAGE_NUM_FN1 }, |
| { HOSTFN2_LPU_MBOX0_0, LPU_HOSTFN2_MBOX0_0, HOST_PAGE_NUM_FN2 }, |
| { HOSTFN3_LPU_MBOX0_8, LPU_HOSTFN3_MBOX0_8, HOST_PAGE_NUM_FN3 } |
| }; |
| |
| /* |
| * Host <-> LPU mailbox command/status registers - port 0 |
| */ |
| static struct { u32 hfn, lpu; } ct_p0reg[] = { |
| { HOSTFN0_LPU0_CMD_STAT, LPU0_HOSTFN0_CMD_STAT }, |
| { HOSTFN1_LPU0_CMD_STAT, LPU0_HOSTFN1_CMD_STAT }, |
| { HOSTFN2_LPU0_CMD_STAT, LPU0_HOSTFN2_CMD_STAT }, |
| { HOSTFN3_LPU0_CMD_STAT, LPU0_HOSTFN3_CMD_STAT } |
| }; |
| |
| /* |
| * Host <-> LPU mailbox command/status registers - port 1 |
| */ |
| static struct { u32 hfn, lpu; } ct_p1reg[] = { |
| { HOSTFN0_LPU1_CMD_STAT, LPU1_HOSTFN0_CMD_STAT }, |
| { HOSTFN1_LPU1_CMD_STAT, LPU1_HOSTFN1_CMD_STAT }, |
| { HOSTFN2_LPU1_CMD_STAT, LPU1_HOSTFN2_CMD_STAT }, |
| { HOSTFN3_LPU1_CMD_STAT, LPU1_HOSTFN3_CMD_STAT } |
| }; |
| |
| static struct { uint32_t hfn_mbox, lpu_mbox, hfn_pgn, hfn, lpu, lpu_read; } |
| ct2_reg[] = { |
| { CT2_HOSTFN_LPU0_MBOX0, CT2_LPU0_HOSTFN_MBOX0, CT2_HOSTFN_PAGE_NUM, |
| CT2_HOSTFN_LPU0_CMD_STAT, CT2_LPU0_HOSTFN_CMD_STAT, |
| CT2_HOSTFN_LPU0_READ_STAT}, |
| { CT2_HOSTFN_LPU1_MBOX0, CT2_LPU1_HOSTFN_MBOX0, CT2_HOSTFN_PAGE_NUM, |
| CT2_HOSTFN_LPU1_CMD_STAT, CT2_LPU1_HOSTFN_CMD_STAT, |
| CT2_HOSTFN_LPU1_READ_STAT}, |
| }; |
| |
| static void |
| bfa_ioc_ct_reg_init(struct bfa_ioc_s *ioc) |
| { |
| void __iomem *rb; |
| int pcifn = bfa_ioc_pcifn(ioc); |
| |
| rb = bfa_ioc_bar0(ioc); |
| |
| ioc->ioc_regs.hfn_mbox = rb + ct_fnreg[pcifn].hfn_mbox; |
| ioc->ioc_regs.lpu_mbox = rb + ct_fnreg[pcifn].lpu_mbox; |
| ioc->ioc_regs.host_page_num_fn = rb + ct_fnreg[pcifn].hfn_pgn; |
| |
| if (ioc->port_id == 0) { |
| ioc->ioc_regs.heartbeat = rb + BFA_IOC0_HBEAT_REG; |
| ioc->ioc_regs.ioc_fwstate = rb + BFA_IOC0_STATE_REG; |
| ioc->ioc_regs.alt_ioc_fwstate = rb + BFA_IOC1_STATE_REG; |
| ioc->ioc_regs.hfn_mbox_cmd = rb + ct_p0reg[pcifn].hfn; |
| ioc->ioc_regs.lpu_mbox_cmd = rb + ct_p0reg[pcifn].lpu; |
| ioc->ioc_regs.ll_halt = rb + FW_INIT_HALT_P0; |
| ioc->ioc_regs.alt_ll_halt = rb + FW_INIT_HALT_P1; |
| } else { |
| ioc->ioc_regs.heartbeat = (rb + BFA_IOC1_HBEAT_REG); |
| ioc->ioc_regs.ioc_fwstate = (rb + BFA_IOC1_STATE_REG); |
| ioc->ioc_regs.alt_ioc_fwstate = rb + BFA_IOC0_STATE_REG; |
| ioc->ioc_regs.hfn_mbox_cmd = rb + ct_p1reg[pcifn].hfn; |
| ioc->ioc_regs.lpu_mbox_cmd = rb + ct_p1reg[pcifn].lpu; |
| ioc->ioc_regs.ll_halt = rb + FW_INIT_HALT_P1; |
| ioc->ioc_regs.alt_ll_halt = rb + FW_INIT_HALT_P0; |
| } |
| |
| /* |
| * PSS control registers |
| */ |
| ioc->ioc_regs.pss_ctl_reg = (rb + PSS_CTL_REG); |
| ioc->ioc_regs.pss_err_status_reg = (rb + PSS_ERR_STATUS_REG); |
| ioc->ioc_regs.app_pll_fast_ctl_reg = (rb + APP_PLL_LCLK_CTL_REG); |
| ioc->ioc_regs.app_pll_slow_ctl_reg = (rb + APP_PLL_SCLK_CTL_REG); |
| |
| /* |
| * IOC semaphore registers and serialization |
| */ |
| ioc->ioc_regs.ioc_sem_reg = (rb + HOST_SEM0_REG); |
| ioc->ioc_regs.ioc_usage_sem_reg = (rb + HOST_SEM1_REG); |
| ioc->ioc_regs.ioc_init_sem_reg = (rb + HOST_SEM2_REG); |
| ioc->ioc_regs.ioc_usage_reg = (rb + BFA_FW_USE_COUNT); |
| ioc->ioc_regs.ioc_fail_sync = (rb + BFA_IOC_FAIL_SYNC); |
| |
| /* |
| * sram memory access |
| */ |
| ioc->ioc_regs.smem_page_start = (rb + PSS_SMEM_PAGE_START); |
| ioc->ioc_regs.smem_pg0 = BFI_IOC_SMEM_PG0_CT; |
| |
| /* |
| * err set reg : for notification of hb failure in fcmode |
| */ |
| ioc->ioc_regs.err_set = (rb + ERR_SET_REG); |
| } |
| |
| static void |
| bfa_ioc_ct2_reg_init(struct bfa_ioc_s *ioc) |
| { |
| void __iomem *rb; |
| int port = bfa_ioc_portid(ioc); |
| |
| rb = bfa_ioc_bar0(ioc); |
| |
| ioc->ioc_regs.hfn_mbox = rb + ct2_reg[port].hfn_mbox; |
| ioc->ioc_regs.lpu_mbox = rb + ct2_reg[port].lpu_mbox; |
| ioc->ioc_regs.host_page_num_fn = rb + ct2_reg[port].hfn_pgn; |
| ioc->ioc_regs.hfn_mbox_cmd = rb + ct2_reg[port].hfn; |
| ioc->ioc_regs.lpu_mbox_cmd = rb + ct2_reg[port].lpu; |
| ioc->ioc_regs.lpu_read_stat = rb + ct2_reg[port].lpu_read; |
| |
| if (port == 0) { |
| ioc->ioc_regs.heartbeat = rb + CT2_BFA_IOC0_HBEAT_REG; |
| ioc->ioc_regs.ioc_fwstate = rb + CT2_BFA_IOC0_STATE_REG; |
| ioc->ioc_regs.alt_ioc_fwstate = rb + CT2_BFA_IOC1_STATE_REG; |
| ioc->ioc_regs.ll_halt = rb + FW_INIT_HALT_P0; |
| ioc->ioc_regs.alt_ll_halt = rb + FW_INIT_HALT_P1; |
| } else { |
| ioc->ioc_regs.heartbeat = (rb + CT2_BFA_IOC1_HBEAT_REG); |
| ioc->ioc_regs.ioc_fwstate = (rb + CT2_BFA_IOC1_STATE_REG); |
| ioc->ioc_regs.alt_ioc_fwstate = rb + CT2_BFA_IOC0_STATE_REG; |
| ioc->ioc_regs.ll_halt = rb + FW_INIT_HALT_P1; |
| ioc->ioc_regs.alt_ll_halt = rb + FW_INIT_HALT_P0; |
| } |
| |
| /* |
| * PSS control registers |
| */ |
| ioc->ioc_regs.pss_ctl_reg = (rb + PSS_CTL_REG); |
| ioc->ioc_regs.pss_err_status_reg = (rb + PSS_ERR_STATUS_REG); |
| ioc->ioc_regs.app_pll_fast_ctl_reg = (rb + CT2_APP_PLL_LCLK_CTL_REG); |
| ioc->ioc_regs.app_pll_slow_ctl_reg = (rb + CT2_APP_PLL_SCLK_CTL_REG); |
| |
| /* |
| * IOC semaphore registers and serialization |
| */ |
| ioc->ioc_regs.ioc_sem_reg = (rb + CT2_HOST_SEM0_REG); |
| ioc->ioc_regs.ioc_usage_sem_reg = (rb + CT2_HOST_SEM1_REG); |
| ioc->ioc_regs.ioc_init_sem_reg = (rb + CT2_HOST_SEM2_REG); |
| ioc->ioc_regs.ioc_usage_reg = (rb + CT2_BFA_FW_USE_COUNT); |
| ioc->ioc_regs.ioc_fail_sync = (rb + CT2_BFA_IOC_FAIL_SYNC); |
| |
| /* |
| * sram memory access |
| */ |
| ioc->ioc_regs.smem_page_start = (rb + PSS_SMEM_PAGE_START); |
| ioc->ioc_regs.smem_pg0 = BFI_IOC_SMEM_PG0_CT; |
| |
| /* |
| * err set reg : for notification of hb failure in fcmode |
| */ |
| ioc->ioc_regs.err_set = (rb + ERR_SET_REG); |
| } |
| |
| /* |
| * Initialize IOC to port mapping. |
| */ |
| |
| #define FNC_PERS_FN_SHIFT(__fn) ((__fn) * 8) |
| static void |
| bfa_ioc_ct_map_port(struct bfa_ioc_s *ioc) |
| { |
| void __iomem *rb = ioc->pcidev.pci_bar_kva; |
| u32 r32; |
| |
| /* |
| * For catapult, base port id on personality register and IOC type |
| */ |
| r32 = readl(rb + FNC_PERS_REG); |
| r32 >>= FNC_PERS_FN_SHIFT(bfa_ioc_pcifn(ioc)); |
| ioc->port_id = (r32 & __F0_PORT_MAP_MK) >> __F0_PORT_MAP_SH; |
| |
| bfa_trc(ioc, bfa_ioc_pcifn(ioc)); |
| bfa_trc(ioc, ioc->port_id); |
| } |
| |
| static void |
| bfa_ioc_ct2_map_port(struct bfa_ioc_s *ioc) |
| { |
| void __iomem *rb = ioc->pcidev.pci_bar_kva; |
| u32 r32; |
| |
| r32 = readl(rb + CT2_HOSTFN_PERSONALITY0); |
| ioc->port_id = ((r32 & __FC_LL_PORT_MAP__MK) >> __FC_LL_PORT_MAP__SH); |
| |
| bfa_trc(ioc, bfa_ioc_pcifn(ioc)); |
| bfa_trc(ioc, ioc->port_id); |
| } |
| |
| /* |
| * Set interrupt mode for a function: INTX or MSIX |
| */ |
| static void |
| bfa_ioc_ct_isr_mode_set(struct bfa_ioc_s *ioc, bfa_boolean_t msix) |
| { |
| void __iomem *rb = ioc->pcidev.pci_bar_kva; |
| u32 r32, mode; |
| |
| r32 = readl(rb + FNC_PERS_REG); |
| bfa_trc(ioc, r32); |
| |
| mode = (r32 >> FNC_PERS_FN_SHIFT(bfa_ioc_pcifn(ioc))) & |
| __F0_INTX_STATUS; |
| |
| /* |
| * If already in desired mode, do not change anything |
| */ |
| if ((!msix && mode) || (msix && !mode)) |
| return; |
| |
| if (msix) |
| mode = __F0_INTX_STATUS_MSIX; |
| else |
| mode = __F0_INTX_STATUS_INTA; |
| |
| r32 &= ~(__F0_INTX_STATUS << FNC_PERS_FN_SHIFT(bfa_ioc_pcifn(ioc))); |
| r32 |= (mode << FNC_PERS_FN_SHIFT(bfa_ioc_pcifn(ioc))); |
| bfa_trc(ioc, r32); |
| |
| writel(r32, rb + FNC_PERS_REG); |
| } |
| |
| bfa_boolean_t |
| bfa_ioc_ct2_lpu_read_stat(struct bfa_ioc_s *ioc) |
| { |
| u32 r32; |
| |
| r32 = readl(ioc->ioc_regs.lpu_read_stat); |
| if (r32) { |
| writel(1, ioc->ioc_regs.lpu_read_stat); |
| return BFA_TRUE; |
| } |
| |
| return BFA_FALSE; |
| } |
| |
| /* |
| * Cleanup hw semaphore and usecnt registers |
| */ |
| static void |
| bfa_ioc_ct_ownership_reset(struct bfa_ioc_s *ioc) |
| { |
| |
| if (bfa_ioc_is_cna(ioc)) { |
| bfa_ioc_sem_get(ioc->ioc_regs.ioc_usage_sem_reg); |
| writel(0, ioc->ioc_regs.ioc_usage_reg); |
| readl(ioc->ioc_regs.ioc_usage_sem_reg); |
| writel(1, ioc->ioc_regs.ioc_usage_sem_reg); |
| } |
| |
| /* |
| * Read the hw sem reg to make sure that it is locked |
| * before we clear it. If it is not locked, writing 1 |
| * will lock it instead of clearing it. |
| */ |
| readl(ioc->ioc_regs.ioc_sem_reg); |
| writel(1, ioc->ioc_regs.ioc_sem_reg); |
| } |
| |
| static bfa_boolean_t |
| bfa_ioc_ct_sync_start(struct bfa_ioc_s *ioc) |
| { |
| uint32_t r32 = readl(ioc->ioc_regs.ioc_fail_sync); |
| uint32_t sync_reqd = bfa_ioc_ct_get_sync_reqd(r32); |
| |
| /* |
| * Driver load time. If the sync required bit for this PCI fn |
| * is set, it is due to an unclean exit by the driver for this |
| * PCI fn in the previous incarnation. Whoever comes here first |
| * should clean it up, no matter which PCI fn. |
| */ |
| |
| if (sync_reqd & bfa_ioc_ct_sync_pos(ioc)) { |
| writel(0, ioc->ioc_regs.ioc_fail_sync); |
| writel(1, ioc->ioc_regs.ioc_usage_reg); |
| writel(BFI_IOC_UNINIT, ioc->ioc_regs.ioc_fwstate); |
| writel(BFI_IOC_UNINIT, ioc->ioc_regs.alt_ioc_fwstate); |
| return BFA_TRUE; |
| } |
| |
| return bfa_ioc_ct_sync_complete(ioc); |
| } |
| |
| /* |
| * Synchronized IOC failure processing routines |
| */ |
| static void |
| bfa_ioc_ct_sync_join(struct bfa_ioc_s *ioc) |
| { |
| uint32_t r32 = readl(ioc->ioc_regs.ioc_fail_sync); |
| uint32_t sync_pos = bfa_ioc_ct_sync_reqd_pos(ioc); |
| |
| writel((r32 | sync_pos), ioc->ioc_regs.ioc_fail_sync); |
| } |
| |
| static void |
| bfa_ioc_ct_sync_leave(struct bfa_ioc_s *ioc) |
| { |
| uint32_t r32 = readl(ioc->ioc_regs.ioc_fail_sync); |
| uint32_t sync_msk = bfa_ioc_ct_sync_reqd_pos(ioc) | |
| bfa_ioc_ct_sync_pos(ioc); |
| |
| writel((r32 & ~sync_msk), ioc->ioc_regs.ioc_fail_sync); |
| } |
| |
| static void |
| bfa_ioc_ct_sync_ack(struct bfa_ioc_s *ioc) |
| { |
| uint32_t r32 = readl(ioc->ioc_regs.ioc_fail_sync); |
| |
| writel((r32 | bfa_ioc_ct_sync_pos(ioc)), |
| ioc->ioc_regs.ioc_fail_sync); |
| } |
| |
| static bfa_boolean_t |
| bfa_ioc_ct_sync_complete(struct bfa_ioc_s *ioc) |
| { |
| uint32_t r32 = readl(ioc->ioc_regs.ioc_fail_sync); |
| uint32_t sync_reqd = bfa_ioc_ct_get_sync_reqd(r32); |
| uint32_t sync_ackd = bfa_ioc_ct_get_sync_ackd(r32); |
| uint32_t tmp_ackd; |
| |
| if (sync_ackd == 0) |
| return BFA_TRUE; |
| |
| /* |
| * The check below is to see whether any other PCI fn |
| * has reinitialized the ASIC (reset sync_ackd bits) |
| * and failed again while this IOC was waiting for hw |
| * semaphore (in bfa_iocpf_sm_semwait()). |
| */ |
| tmp_ackd = sync_ackd; |
| if ((sync_reqd & bfa_ioc_ct_sync_pos(ioc)) && |
| !(sync_ackd & bfa_ioc_ct_sync_pos(ioc))) |
| sync_ackd |= bfa_ioc_ct_sync_pos(ioc); |
| |
| if (sync_reqd == sync_ackd) { |
| writel(bfa_ioc_ct_clear_sync_ackd(r32), |
| ioc->ioc_regs.ioc_fail_sync); |
| writel(BFI_IOC_FAIL, ioc->ioc_regs.ioc_fwstate); |
| writel(BFI_IOC_FAIL, ioc->ioc_regs.alt_ioc_fwstate); |
| return BFA_TRUE; |
| } |
| |
| /* |
| * If another PCI fn reinitialized and failed again while |
| * this IOC was waiting for hw sem, the sync_ackd bit for |
| * this IOC need to be set again to allow reinitialization. |
| */ |
| if (tmp_ackd != sync_ackd) |
| writel((r32 | sync_ackd), ioc->ioc_regs.ioc_fail_sync); |
| |
| return BFA_FALSE; |
| } |
| |
| /** |
| * Called from bfa_ioc_attach() to map asic specific calls. |
| */ |
| static void |
| bfa_ioc_set_ctx_hwif(struct bfa_ioc_s *ioc, struct bfa_ioc_hwif_s *hwif) |
| { |
| hwif->ioc_firmware_lock = bfa_ioc_ct_firmware_lock; |
| hwif->ioc_firmware_unlock = bfa_ioc_ct_firmware_unlock; |
| hwif->ioc_notify_fail = bfa_ioc_ct_notify_fail; |
| hwif->ioc_ownership_reset = bfa_ioc_ct_ownership_reset; |
| hwif->ioc_sync_start = bfa_ioc_ct_sync_start; |
| hwif->ioc_sync_join = bfa_ioc_ct_sync_join; |
| hwif->ioc_sync_leave = bfa_ioc_ct_sync_leave; |
| hwif->ioc_sync_ack = bfa_ioc_ct_sync_ack; |
| hwif->ioc_sync_complete = bfa_ioc_ct_sync_complete; |
| } |
| |
| /** |
| * Called from bfa_ioc_attach() to map asic specific calls. |
| */ |
| void |
| bfa_ioc_set_ct_hwif(struct bfa_ioc_s *ioc) |
| { |
| bfa_ioc_set_ctx_hwif(ioc, &hwif_ct); |
| |
| hwif_ct.ioc_pll_init = bfa_ioc_ct_pll_init; |
| hwif_ct.ioc_reg_init = bfa_ioc_ct_reg_init; |
| hwif_ct.ioc_map_port = bfa_ioc_ct_map_port; |
| hwif_ct.ioc_isr_mode_set = bfa_ioc_ct_isr_mode_set; |
| ioc->ioc_hwif = &hwif_ct; |
| } |
| |
| /** |
| * Called from bfa_ioc_attach() to map asic specific calls. |
| */ |
| void |
| bfa_ioc_set_ct2_hwif(struct bfa_ioc_s *ioc) |
| { |
| bfa_ioc_set_ctx_hwif(ioc, &hwif_ct2); |
| |
| hwif_ct2.ioc_pll_init = bfa_ioc_ct2_pll_init; |
| hwif_ct2.ioc_reg_init = bfa_ioc_ct2_reg_init; |
| hwif_ct2.ioc_map_port = bfa_ioc_ct2_map_port; |
| hwif_ct2.ioc_lpu_read_stat = bfa_ioc_ct2_lpu_read_stat; |
| hwif_ct2.ioc_isr_mode_set = NULL; |
| ioc->ioc_hwif = &hwif_ct2; |
| } |
| |
| /* |
| * Workaround for MSI-X resource allocation for catapult-2 with no asic block |
| */ |
| #define HOSTFN_MSIX_DEFAULT 64 |
| #define HOSTFN_MSIX_VT_INDEX_MBOX_ERR 0x30138 |
| #define HOSTFN_MSIX_VT_OFST_NUMVT 0x3013c |
| #define __MSIX_VT_NUMVT__MK 0x003ff800 |
| #define __MSIX_VT_NUMVT__SH 11 |
| #define __MSIX_VT_NUMVT_(_v) ((_v) << __MSIX_VT_NUMVT__SH) |
| #define __MSIX_VT_OFST_ 0x000007ff |
| void |
| bfa_ioc_ct2_poweron(struct bfa_ioc_s *ioc) |
| { |
| void __iomem *rb = ioc->pcidev.pci_bar_kva; |
| u32 r32; |
| |
| r32 = readl(rb + HOSTFN_MSIX_VT_OFST_NUMVT); |
| if (r32 & __MSIX_VT_NUMVT__MK) { |
| writel(r32 & __MSIX_VT_OFST_, |
| rb + HOSTFN_MSIX_VT_INDEX_MBOX_ERR); |
| return; |
| } |
| |
| writel(__MSIX_VT_NUMVT_(HOSTFN_MSIX_DEFAULT - 1) | |
| HOSTFN_MSIX_DEFAULT * bfa_ioc_pcifn(ioc), |
| rb + HOSTFN_MSIX_VT_OFST_NUMVT); |
| writel(HOSTFN_MSIX_DEFAULT * bfa_ioc_pcifn(ioc), |
| rb + HOSTFN_MSIX_VT_INDEX_MBOX_ERR); |
| } |
| |
| bfa_status_t |
| bfa_ioc_ct_pll_init(void __iomem *rb, enum bfi_asic_mode mode) |
| { |
| u32 pll_sclk, pll_fclk, r32; |
| bfa_boolean_t fcmode = (mode == BFI_ASIC_MODE_FC); |
| |
| pll_sclk = __APP_PLL_SCLK_LRESETN | __APP_PLL_SCLK_ENARST | |
| __APP_PLL_SCLK_RSEL200500 | __APP_PLL_SCLK_P0_1(3U) | |
| __APP_PLL_SCLK_JITLMT0_1(3U) | |
| __APP_PLL_SCLK_CNTLMT0_1(1U); |
| pll_fclk = __APP_PLL_LCLK_LRESETN | __APP_PLL_LCLK_ENARST | |
| __APP_PLL_LCLK_RSEL200500 | __APP_PLL_LCLK_P0_1(3U) | |
| __APP_PLL_LCLK_JITLMT0_1(3U) | |
| __APP_PLL_LCLK_CNTLMT0_1(1U); |
| |
| if (fcmode) { |
| writel(0, (rb + OP_MODE)); |
| writel(__APP_EMS_CMLCKSEL | __APP_EMS_REFCKBUFEN2 | |
| __APP_EMS_CHANNEL_SEL, (rb + ETH_MAC_SER_REG)); |
| } else { |
| writel(__GLOBAL_FCOE_MODE, (rb + OP_MODE)); |
| writel(__APP_EMS_REFCKBUFEN1, (rb + ETH_MAC_SER_REG)); |
| } |
| writel(BFI_IOC_UNINIT, (rb + BFA_IOC0_STATE_REG)); |
| writel(BFI_IOC_UNINIT, (rb + BFA_IOC1_STATE_REG)); |
| writel(0xffffffffU, (rb + HOSTFN0_INT_MSK)); |
| writel(0xffffffffU, (rb + HOSTFN1_INT_MSK)); |
| writel(0xffffffffU, (rb + HOSTFN0_INT_STATUS)); |
| writel(0xffffffffU, (rb + HOSTFN1_INT_STATUS)); |
| writel(0xffffffffU, (rb + HOSTFN0_INT_MSK)); |
| writel(0xffffffffU, (rb + HOSTFN1_INT_MSK)); |
| writel(pll_sclk | __APP_PLL_SCLK_LOGIC_SOFT_RESET, |
| rb + APP_PLL_SCLK_CTL_REG); |
| writel(pll_fclk | __APP_PLL_LCLK_LOGIC_SOFT_RESET, |
| rb + APP_PLL_LCLK_CTL_REG); |
| writel(pll_sclk | __APP_PLL_SCLK_LOGIC_SOFT_RESET | |
| __APP_PLL_SCLK_ENABLE, rb + APP_PLL_SCLK_CTL_REG); |
| writel(pll_fclk | __APP_PLL_LCLK_LOGIC_SOFT_RESET | |
| __APP_PLL_LCLK_ENABLE, rb + APP_PLL_LCLK_CTL_REG); |
| readl(rb + HOSTFN0_INT_MSK); |
| udelay(2000); |
| writel(0xffffffffU, (rb + HOSTFN0_INT_STATUS)); |
| writel(0xffffffffU, (rb + HOSTFN1_INT_STATUS)); |
| writel(pll_sclk | __APP_PLL_SCLK_ENABLE, rb + APP_PLL_SCLK_CTL_REG); |
| writel(pll_fclk | __APP_PLL_LCLK_ENABLE, rb + APP_PLL_LCLK_CTL_REG); |
| |
| if (!fcmode) { |
| writel(__PMM_1T_RESET_P, (rb + PMM_1T_RESET_REG_P0)); |
| writel(__PMM_1T_RESET_P, (rb + PMM_1T_RESET_REG_P1)); |
| } |
| r32 = readl((rb + PSS_CTL_REG)); |
| r32 &= ~__PSS_LMEM_RESET; |
| writel(r32, (rb + PSS_CTL_REG)); |
| udelay(1000); |
| if (!fcmode) { |
| writel(0, (rb + PMM_1T_RESET_REG_P0)); |
| writel(0, (rb + PMM_1T_RESET_REG_P1)); |
| } |
| |
| writel(__EDRAM_BISTR_START, (rb + MBIST_CTL_REG)); |
| udelay(1000); |
| r32 = readl((rb + MBIST_STAT_REG)); |
| writel(0, (rb + MBIST_CTL_REG)); |
| return BFA_STATUS_OK; |
| } |
| |
| static void |
| bfa_ioc_ct2_sclk_init(void __iomem *rb) |
| { |
| u32 r32; |
| |
| /* |
| * put s_clk PLL and PLL FSM in reset |
| */ |
| r32 = readl((rb + CT2_APP_PLL_SCLK_CTL_REG)); |
| r32 &= ~(__APP_PLL_SCLK_ENABLE | __APP_PLL_SCLK_LRESETN); |
| r32 |= (__APP_PLL_SCLK_ENARST | __APP_PLL_SCLK_BYPASS | |
| __APP_PLL_SCLK_LOGIC_SOFT_RESET); |
| writel(r32, (rb + CT2_APP_PLL_SCLK_CTL_REG)); |
| |
| /* |
| * Ignore mode and program for the max clock (which is FC16) |
| * Firmware/NFC will do the PLL init appropiately |
| */ |
| r32 = readl((rb + CT2_APP_PLL_SCLK_CTL_REG)); |
| r32 &= ~(__APP_PLL_SCLK_REFCLK_SEL | __APP_PLL_SCLK_CLK_DIV2); |
| writel(r32, (rb + CT2_APP_PLL_SCLK_CTL_REG)); |
| |
| /* |
| * while doing PLL init dont clock gate ethernet subsystem |
| */ |
| r32 = readl((rb + CT2_CHIP_MISC_PRG)); |
| writel(r32 | __ETH_CLK_ENABLE_PORT0, (rb + CT2_CHIP_MISC_PRG)); |
| |
| r32 = readl((rb + CT2_PCIE_MISC_REG)); |
| writel(r32 | __ETH_CLK_ENABLE_PORT1, (rb + CT2_PCIE_MISC_REG)); |
| |
| /* |
| * set sclk value |
| */ |
| r32 = readl((rb + CT2_APP_PLL_SCLK_CTL_REG)); |
| r32 &= (__P_SCLK_PLL_LOCK | __APP_PLL_SCLK_REFCLK_SEL | |
| __APP_PLL_SCLK_CLK_DIV2); |
| writel(r32 | 0x1061731b, (rb + CT2_APP_PLL_SCLK_CTL_REG)); |
| |
| /* |
| * poll for s_clk lock or delay 1ms |
| */ |
| udelay(1000); |
| } |
| |
| static void |
| bfa_ioc_ct2_lclk_init(void __iomem *rb) |
| { |
| u32 r32; |
| |
| /* |
| * put l_clk PLL and PLL FSM in reset |
| */ |
| r32 = readl((rb + CT2_APP_PLL_LCLK_CTL_REG)); |
| r32 &= ~(__APP_PLL_LCLK_ENABLE | __APP_PLL_LCLK_LRESETN); |
| r32 |= (__APP_PLL_LCLK_ENARST | __APP_PLL_LCLK_BYPASS | |
| __APP_PLL_LCLK_LOGIC_SOFT_RESET); |
| writel(r32, (rb + CT2_APP_PLL_LCLK_CTL_REG)); |
| |
| /* |
| * set LPU speed (set for FC16 which will work for other modes) |
| */ |
| r32 = readl((rb + CT2_CHIP_MISC_PRG)); |
| writel(r32, (rb + CT2_CHIP_MISC_PRG)); |
| |
| /* |
| * set LPU half speed (set for FC16 which will work for other modes) |
| */ |
| r32 = readl((rb + CT2_APP_PLL_LCLK_CTL_REG)); |
| writel(r32, (rb + CT2_APP_PLL_LCLK_CTL_REG)); |
| |
| /* |
| * set lclk for mode (set for FC16) |
| */ |
| r32 = readl((rb + CT2_APP_PLL_LCLK_CTL_REG)); |
| r32 &= (__P_LCLK_PLL_LOCK | __APP_LPUCLK_HALFSPEED); |
| r32 |= 0x20c1731b; |
| writel(r32, (rb + CT2_APP_PLL_LCLK_CTL_REG)); |
| |
| /* |
| * poll for s_clk lock or delay 1ms |
| */ |
| udelay(1000); |
| } |
| |
| static void |
| bfa_ioc_ct2_mem_init(void __iomem *rb) |
| { |
| u32 r32; |
| |
| r32 = readl((rb + PSS_CTL_REG)); |
| r32 &= ~__PSS_LMEM_RESET; |
| writel(r32, (rb + PSS_CTL_REG)); |
| udelay(1000); |
| |
| writel(__EDRAM_BISTR_START, (rb + CT2_MBIST_CTL_REG)); |
| udelay(1000); |
| writel(0, (rb + CT2_MBIST_CTL_REG)); |
| } |
| |
| void |
| bfa_ioc_ct2_mac_reset(void __iomem *rb) |
| { |
| u32 r32; |
| |
| bfa_ioc_ct2_sclk_init(rb); |
| bfa_ioc_ct2_lclk_init(rb); |
| |
| /* |
| * release soft reset on s_clk & l_clk |
| */ |
| r32 = readl((rb + CT2_APP_PLL_SCLK_CTL_REG)); |
| writel(r32 & ~__APP_PLL_SCLK_LOGIC_SOFT_RESET, |
| (rb + CT2_APP_PLL_SCLK_CTL_REG)); |
| |
| /* |
| * release soft reset on s_clk & l_clk |
| */ |
| r32 = readl((rb + CT2_APP_PLL_LCLK_CTL_REG)); |
| writel(r32 & ~__APP_PLL_LCLK_LOGIC_SOFT_RESET, |
| (rb + CT2_APP_PLL_LCLK_CTL_REG)); |
| |
| /* put port0, port1 MAC & AHB in reset */ |
| writel((__CSI_MAC_RESET | __CSI_MAC_AHB_RESET), |
| rb + CT2_CSI_MAC_CONTROL_REG(0)); |
| writel((__CSI_MAC_RESET | __CSI_MAC_AHB_RESET), |
| rb + CT2_CSI_MAC_CONTROL_REG(1)); |
| } |
| |
| #define CT2_NFC_MAX_DELAY 1000 |
| #define CT2_NFC_VER_VALID 0x143 |
| #define BFA_IOC_PLL_POLL 1000000 |
| |
| static bfa_boolean_t |
| bfa_ioc_ct2_nfc_halted(void __iomem *rb) |
| { |
| u32 r32; |
| |
| r32 = readl(rb + CT2_NFC_CSR_SET_REG); |
| if (r32 & __NFC_CONTROLLER_HALTED) |
| return BFA_TRUE; |
| |
| return BFA_FALSE; |
| } |
| |
| static void |
| bfa_ioc_ct2_nfc_resume(void __iomem *rb) |
| { |
| u32 r32; |
| int i; |
| |
| writel(__HALT_NFC_CONTROLLER, rb + CT2_NFC_CSR_CLR_REG); |
| for (i = 0; i < CT2_NFC_MAX_DELAY; i++) { |
| r32 = readl(rb + CT2_NFC_CSR_SET_REG); |
| if (!(r32 & __NFC_CONTROLLER_HALTED)) |
| return; |
| udelay(1000); |
| } |
| WARN_ON(1); |
| } |
| |
| bfa_status_t |
| bfa_ioc_ct2_pll_init(void __iomem *rb, enum bfi_asic_mode mode) |
| { |
| u32 wgn, r32, nfc_ver, i; |
| |
| wgn = readl(rb + CT2_WGN_STATUS); |
| nfc_ver = readl(rb + CT2_RSC_GPR15_REG); |
| |
| if ((wgn == (__A2T_AHB_LOAD | __WGN_READY)) && |
| (nfc_ver >= CT2_NFC_VER_VALID)) { |
| if (bfa_ioc_ct2_nfc_halted(rb)) |
| bfa_ioc_ct2_nfc_resume(rb); |
| |
| writel(__RESET_AND_START_SCLK_LCLK_PLLS, |
| rb + CT2_CSI_FW_CTL_SET_REG); |
| |
| for (i = 0; i < BFA_IOC_PLL_POLL; i++) { |
| r32 = readl(rb + CT2_APP_PLL_LCLK_CTL_REG); |
| if (r32 & __RESET_AND_START_SCLK_LCLK_PLLS) |
| break; |
| } |
| |
| WARN_ON(!(r32 & __RESET_AND_START_SCLK_LCLK_PLLS)); |
| |
| for (i = 0; i < BFA_IOC_PLL_POLL; i++) { |
| r32 = readl(rb + CT2_APP_PLL_LCLK_CTL_REG); |
| if (!(r32 & __RESET_AND_START_SCLK_LCLK_PLLS)) |
| break; |
| } |
| |
| WARN_ON(r32 & __RESET_AND_START_SCLK_LCLK_PLLS); |
| udelay(1000); |
| |
| r32 = readl(rb + CT2_CSI_FW_CTL_REG); |
| WARN_ON(r32 & __RESET_AND_START_SCLK_LCLK_PLLS); |
| } else { |
| writel(__HALT_NFC_CONTROLLER, rb + CT2_NFC_CSR_SET_REG); |
| for (i = 0; i < CT2_NFC_MAX_DELAY; i++) { |
| r32 = readl(rb + CT2_NFC_CSR_SET_REG); |
| if (r32 & __NFC_CONTROLLER_HALTED) |
| break; |
| udelay(1000); |
| } |
| |
| bfa_ioc_ct2_mac_reset(rb); |
| bfa_ioc_ct2_sclk_init(rb); |
| bfa_ioc_ct2_lclk_init(rb); |
| |
| /* |
| * release soft reset on s_clk & l_clk |
| */ |
| r32 = readl(rb + CT2_APP_PLL_SCLK_CTL_REG); |
| writel(r32 & ~__APP_PLL_SCLK_LOGIC_SOFT_RESET, |
| (rb + CT2_APP_PLL_SCLK_CTL_REG)); |
| |
| /* |
| * release soft reset on s_clk & l_clk |
| */ |
| r32 = readl(rb + CT2_APP_PLL_LCLK_CTL_REG); |
| writel(r32 & ~__APP_PLL_LCLK_LOGIC_SOFT_RESET, |
| (rb + CT2_APP_PLL_LCLK_CTL_REG)); |
| } |
| |
| /* |
| * Announce flash device presence, if flash was corrupted. |
| */ |
| if (wgn == (__WGN_READY | __GLBL_PF_VF_CFG_RDY)) { |
| r32 = readl(rb + PSS_GPIO_OUT_REG); |
| writel(r32 & ~1, (rb + PSS_GPIO_OUT_REG)); |
| r32 = readl(rb + PSS_GPIO_OE_REG); |
| writel(r32 | 1, (rb + PSS_GPIO_OE_REG)); |
| } |
| |
| /* |
| * Mask the interrupts and clear any |
| * pending interrupts. |
| */ |
| writel(1, (rb + CT2_LPU0_HOSTFN_MBOX0_MSK)); |
| writel(1, (rb + CT2_LPU1_HOSTFN_MBOX0_MSK)); |
| |
| /* For first time initialization, no need to clear interrupts */ |
| r32 = readl(rb + HOST_SEM5_REG); |
| if (r32 & 0x1) { |
| r32 = readl(rb + CT2_LPU0_HOSTFN_CMD_STAT); |
| if (r32 == 1) { |
| writel(1, rb + CT2_LPU0_HOSTFN_CMD_STAT); |
| readl((rb + CT2_LPU0_HOSTFN_CMD_STAT)); |
| } |
| r32 = readl(rb + CT2_LPU1_HOSTFN_CMD_STAT); |
| if (r32 == 1) { |
| writel(1, rb + CT2_LPU1_HOSTFN_CMD_STAT); |
| readl(rb + CT2_LPU1_HOSTFN_CMD_STAT); |
| } |
| } |
| |
| bfa_ioc_ct2_mem_init(rb); |
| |
| writel(BFI_IOC_UNINIT, rb + CT2_BFA_IOC0_STATE_REG); |
| writel(BFI_IOC_UNINIT, rb + CT2_BFA_IOC1_STATE_REG); |
| |
| return BFA_STATUS_OK; |
| } |