| /* |
| * omap_device implementation |
| * |
| * Copyright (C) 2009-2010 Nokia Corporation |
| * Paul Walmsley, Kevin Hilman |
| * |
| * Developed in collaboration with (alphabetical order): Benoit |
| * Cousson, Thara Gopinath, Tony Lindgren, Rajendra Nayak, Vikram |
| * Pandita, Sakari Poussa, Anand Sawant, Santosh Shilimkar, Richard |
| * Woodruff |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * This code provides a consistent interface for OMAP device drivers |
| * to control power management and interconnect properties of their |
| * devices. |
| * |
| * In the medium- to long-term, this code should either be |
| * a) implemented via arch-specific pointers in platform_data |
| * or |
| * b) implemented as a proper omap_bus/omap_device in Linux, no more |
| * platform_data func pointers |
| * |
| * |
| * Guidelines for usage by driver authors: |
| * |
| * 1. These functions are intended to be used by device drivers via |
| * function pointers in struct platform_data. As an example, |
| * omap_device_enable() should be passed to the driver as |
| * |
| * struct foo_driver_platform_data { |
| * ... |
| * int (*device_enable)(struct platform_device *pdev); |
| * ... |
| * } |
| * |
| * Note that the generic "device_enable" name is used, rather than |
| * "omap_device_enable". This is so other architectures can pass in their |
| * own enable/disable functions here. |
| * |
| * This should be populated during device setup: |
| * |
| * ... |
| * pdata->device_enable = omap_device_enable; |
| * ... |
| * |
| * 2. Drivers should first check to ensure the function pointer is not null |
| * before calling it, as in: |
| * |
| * if (pdata->device_enable) |
| * pdata->device_enable(pdev); |
| * |
| * This allows other architectures that don't use similar device_enable()/ |
| * device_shutdown() functions to execute normally. |
| * |
| * ... |
| * |
| * Suggested usage by device drivers: |
| * |
| * During device initialization: |
| * device_enable() |
| * |
| * During device idle: |
| * (save remaining device context if necessary) |
| * device_idle(); |
| * |
| * During device resume: |
| * device_enable(); |
| * (restore context if necessary) |
| * |
| * During device shutdown: |
| * device_shutdown() |
| * (device must be reinitialized at this point to use it again) |
| * |
| */ |
| #undef DEBUG |
| |
| #include <linux/kernel.h> |
| #include <linux/export.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/clk.h> |
| #include <linux/clkdev.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/of.h> |
| #include <linux/notifier.h> |
| |
| #include <plat/omap_device.h> |
| #include <plat/omap_hwmod.h> |
| #include <plat/clock.h> |
| |
| /* These parameters are passed to _omap_device_{de,}activate() */ |
| #define USE_WAKEUP_LAT 0 |
| #define IGNORE_WAKEUP_LAT 1 |
| |
| static int omap_device_register(struct platform_device *pdev); |
| static int omap_early_device_register(struct platform_device *pdev); |
| static struct omap_device *omap_device_alloc(struct platform_device *pdev, |
| struct omap_hwmod **ohs, int oh_cnt, |
| struct omap_device_pm_latency *pm_lats, |
| int pm_lats_cnt); |
| static void omap_device_delete(struct omap_device *od); |
| |
| |
| static struct omap_device_pm_latency omap_default_latency[] = { |
| { |
| .deactivate_func = omap_device_idle_hwmods, |
| .activate_func = omap_device_enable_hwmods, |
| .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, |
| } |
| }; |
| |
| /* Private functions */ |
| |
| /** |
| * _omap_device_activate - increase device readiness |
| * @od: struct omap_device * |
| * @ignore_lat: increase to latency target (0) or full readiness (1)? |
| * |
| * Increase readiness of omap_device @od (thus decreasing device |
| * wakeup latency, but consuming more power). If @ignore_lat is |
| * IGNORE_WAKEUP_LAT, make the omap_device fully active. Otherwise, |
| * if @ignore_lat is USE_WAKEUP_LAT, and the device's maximum wakeup |
| * latency is greater than the requested maximum wakeup latency, step |
| * backwards in the omap_device_pm_latency table to ensure the |
| * device's maximum wakeup latency is less than or equal to the |
| * requested maximum wakeup latency. Returns 0. |
| */ |
| static int _omap_device_activate(struct omap_device *od, u8 ignore_lat) |
| { |
| struct timespec a, b, c; |
| |
| dev_dbg(&od->pdev->dev, "omap_device: activating\n"); |
| |
| while (od->pm_lat_level > 0) { |
| struct omap_device_pm_latency *odpl; |
| unsigned long long act_lat = 0; |
| |
| od->pm_lat_level--; |
| |
| odpl = od->pm_lats + od->pm_lat_level; |
| |
| if (!ignore_lat && |
| (od->dev_wakeup_lat <= od->_dev_wakeup_lat_limit)) |
| break; |
| |
| read_persistent_clock(&a); |
| |
| /* XXX check return code */ |
| odpl->activate_func(od); |
| |
| read_persistent_clock(&b); |
| |
| c = timespec_sub(b, a); |
| act_lat = timespec_to_ns(&c); |
| |
| dev_dbg(&od->pdev->dev, |
| "omap_device: pm_lat %d: activate: elapsed time " |
| "%llu nsec\n", od->pm_lat_level, act_lat); |
| |
| if (act_lat > odpl->activate_lat) { |
| odpl->activate_lat_worst = act_lat; |
| if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) { |
| odpl->activate_lat = act_lat; |
| dev_dbg(&od->pdev->dev, |
| "new worst case activate latency " |
| "%d: %llu\n", |
| od->pm_lat_level, act_lat); |
| } else |
| dev_warn(&od->pdev->dev, |
| "activate latency %d " |
| "higher than exptected. (%llu > %d)\n", |
| od->pm_lat_level, act_lat, |
| odpl->activate_lat); |
| } |
| |
| od->dev_wakeup_lat -= odpl->activate_lat; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * _omap_device_deactivate - decrease device readiness |
| * @od: struct omap_device * |
| * @ignore_lat: decrease to latency target (0) or full inactivity (1)? |
| * |
| * Decrease readiness of omap_device @od (thus increasing device |
| * wakeup latency, but conserving power). If @ignore_lat is |
| * IGNORE_WAKEUP_LAT, make the omap_device fully inactive. Otherwise, |
| * if @ignore_lat is USE_WAKEUP_LAT, and the device's maximum wakeup |
| * latency is less than the requested maximum wakeup latency, step |
| * forwards in the omap_device_pm_latency table to ensure the device's |
| * maximum wakeup latency is less than or equal to the requested |
| * maximum wakeup latency. Returns 0. |
| */ |
| static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat) |
| { |
| struct timespec a, b, c; |
| |
| dev_dbg(&od->pdev->dev, "omap_device: deactivating\n"); |
| |
| while (od->pm_lat_level < od->pm_lats_cnt) { |
| struct omap_device_pm_latency *odpl; |
| unsigned long long deact_lat = 0; |
| |
| odpl = od->pm_lats + od->pm_lat_level; |
| |
| if (!ignore_lat && |
| ((od->dev_wakeup_lat + odpl->activate_lat) > |
| od->_dev_wakeup_lat_limit)) |
| break; |
| |
| read_persistent_clock(&a); |
| |
| /* XXX check return code */ |
| odpl->deactivate_func(od); |
| |
| read_persistent_clock(&b); |
| |
| c = timespec_sub(b, a); |
| deact_lat = timespec_to_ns(&c); |
| |
| dev_dbg(&od->pdev->dev, |
| "omap_device: pm_lat %d: deactivate: elapsed time " |
| "%llu nsec\n", od->pm_lat_level, deact_lat); |
| |
| if (deact_lat > odpl->deactivate_lat) { |
| odpl->deactivate_lat_worst = deact_lat; |
| if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) { |
| odpl->deactivate_lat = deact_lat; |
| dev_dbg(&od->pdev->dev, |
| "new worst case deactivate latency " |
| "%d: %llu\n", |
| od->pm_lat_level, deact_lat); |
| } else |
| dev_warn(&od->pdev->dev, |
| "deactivate latency %d " |
| "higher than exptected. (%llu > %d)\n", |
| od->pm_lat_level, deact_lat, |
| odpl->deactivate_lat); |
| } |
| |
| od->dev_wakeup_lat += odpl->activate_lat; |
| |
| od->pm_lat_level++; |
| } |
| |
| return 0; |
| } |
| |
| static void _add_clkdev(struct omap_device *od, const char *clk_alias, |
| const char *clk_name) |
| { |
| struct clk *r; |
| struct clk_lookup *l; |
| |
| if (!clk_alias || !clk_name) |
| return; |
| |
| dev_dbg(&od->pdev->dev, "Creating %s -> %s\n", clk_alias, clk_name); |
| |
| r = clk_get_sys(dev_name(&od->pdev->dev), clk_alias); |
| if (!IS_ERR(r)) { |
| dev_warn(&od->pdev->dev, |
| "alias %s already exists\n", clk_alias); |
| clk_put(r); |
| return; |
| } |
| |
| r = omap_clk_get_by_name(clk_name); |
| if (IS_ERR(r)) { |
| dev_err(&od->pdev->dev, |
| "omap_clk_get_by_name for %s failed\n", clk_name); |
| return; |
| } |
| |
| l = clkdev_alloc(r, clk_alias, dev_name(&od->pdev->dev)); |
| if (!l) { |
| dev_err(&od->pdev->dev, |
| "clkdev_alloc for %s failed\n", clk_alias); |
| return; |
| } |
| |
| clkdev_add(l); |
| } |
| |
| /** |
| * _add_hwmod_clocks_clkdev - Add clkdev entry for hwmod optional clocks |
| * and main clock |
| * @od: struct omap_device *od |
| * @oh: struct omap_hwmod *oh |
| * |
| * For the main clock and every optional clock present per hwmod per |
| * omap_device, this function adds an entry in the clkdev table of the |
| * form <dev-id=dev_name, con-id=role> if it does not exist already. |
| * |
| * The function is called from inside omap_device_build_ss(), after |
| * omap_device_register. |
| * |
| * This allows drivers to get a pointer to its optional clocks based on its role |
| * by calling clk_get(<dev*>, <role>). |
| * In the case of the main clock, a "fck" alias is used. |
| * |
| * No return value. |
| */ |
| static void _add_hwmod_clocks_clkdev(struct omap_device *od, |
| struct omap_hwmod *oh) |
| { |
| int i; |
| |
| _add_clkdev(od, "fck", oh->main_clk); |
| |
| for (i = 0; i < oh->opt_clks_cnt; i++) |
| _add_clkdev(od, oh->opt_clks[i].role, oh->opt_clks[i].clk); |
| } |
| |
| |
| static struct dev_pm_domain omap_device_pm_domain; |
| |
| /** |
| * omap_device_build_from_dt - build an omap_device with multiple hwmods |
| * @pdev_name: name of the platform_device driver to use |
| * @pdev_id: this platform_device's connection ID |
| * @oh: ptr to the single omap_hwmod that backs this omap_device |
| * @pdata: platform_data ptr to associate with the platform_device |
| * @pdata_len: amount of memory pointed to by @pdata |
| * @pm_lats: pointer to a omap_device_pm_latency array for this device |
| * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats |
| * @is_early_device: should the device be registered as an early device or not |
| * |
| * Function for building an omap_device already registered from device-tree |
| * |
| * Returns 0 or PTR_ERR() on error. |
| */ |
| static int omap_device_build_from_dt(struct platform_device *pdev) |
| { |
| struct omap_hwmod **hwmods; |
| struct omap_device *od; |
| struct omap_hwmod *oh; |
| struct device_node *node = pdev->dev.of_node; |
| const char *oh_name; |
| int oh_cnt, i, ret = 0; |
| |
| oh_cnt = of_property_count_strings(node, "ti,hwmods"); |
| if (!oh_cnt || IS_ERR_VALUE(oh_cnt)) { |
| dev_dbg(&pdev->dev, "No 'hwmods' to build omap_device\n"); |
| return -ENODEV; |
| } |
| |
| hwmods = kzalloc(sizeof(struct omap_hwmod *) * oh_cnt, GFP_KERNEL); |
| if (!hwmods) { |
| ret = -ENOMEM; |
| goto odbfd_exit; |
| } |
| |
| for (i = 0; i < oh_cnt; i++) { |
| of_property_read_string_index(node, "ti,hwmods", i, &oh_name); |
| oh = omap_hwmod_lookup(oh_name); |
| if (!oh) { |
| dev_err(&pdev->dev, "Cannot lookup hwmod '%s'\n", |
| oh_name); |
| ret = -EINVAL; |
| goto odbfd_exit1; |
| } |
| hwmods[i] = oh; |
| } |
| |
| od = omap_device_alloc(pdev, hwmods, oh_cnt, NULL, 0); |
| if (!od) { |
| dev_err(&pdev->dev, "Cannot allocate omap_device for :%s\n", |
| oh_name); |
| ret = PTR_ERR(od); |
| goto odbfd_exit1; |
| } |
| |
| if (of_get_property(node, "ti,no_idle_on_suspend", NULL)) |
| omap_device_disable_idle_on_suspend(pdev); |
| |
| pdev->dev.pm_domain = &omap_device_pm_domain; |
| |
| odbfd_exit1: |
| kfree(hwmods); |
| odbfd_exit: |
| return ret; |
| } |
| |
| static int _omap_device_notifier_call(struct notifier_block *nb, |
| unsigned long event, void *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| |
| switch (event) { |
| case BUS_NOTIFY_ADD_DEVICE: |
| if (pdev->dev.of_node) |
| omap_device_build_from_dt(pdev); |
| break; |
| |
| case BUS_NOTIFY_DEL_DEVICE: |
| if (pdev->archdata.od) |
| omap_device_delete(pdev->archdata.od); |
| break; |
| } |
| |
| return NOTIFY_DONE; |
| } |
| |
| |
| /* Public functions for use by core code */ |
| |
| /** |
| * omap_device_get_context_loss_count - get lost context count |
| * @od: struct omap_device * |
| * |
| * Using the primary hwmod, query the context loss count for this |
| * device. |
| * |
| * Callers should consider context for this device lost any time this |
| * function returns a value different than the value the caller got |
| * the last time it called this function. |
| * |
| * If any hwmods exist for the omap_device assoiated with @pdev, |
| * return the context loss counter for that hwmod, otherwise return |
| * zero. |
| */ |
| int omap_device_get_context_loss_count(struct platform_device *pdev) |
| { |
| struct omap_device *od; |
| u32 ret = 0; |
| |
| od = to_omap_device(pdev); |
| |
| if (od->hwmods_cnt) |
| ret = omap_hwmod_get_context_loss_count(od->hwmods[0]); |
| |
| return ret; |
| } |
| |
| /** |
| * omap_device_count_resources - count number of struct resource entries needed |
| * @od: struct omap_device * |
| * |
| * Count the number of struct resource entries needed for this |
| * omap_device @od. Used by omap_device_build_ss() to determine how |
| * much memory to allocate before calling |
| * omap_device_fill_resources(). Returns the count. |
| */ |
| static int omap_device_count_resources(struct omap_device *od) |
| { |
| int c = 0; |
| int i; |
| |
| for (i = 0; i < od->hwmods_cnt; i++) |
| c += omap_hwmod_count_resources(od->hwmods[i]); |
| |
| pr_debug("omap_device: %s: counted %d total resources across %d " |
| "hwmods\n", od->pdev->name, c, od->hwmods_cnt); |
| |
| return c; |
| } |
| |
| /** |
| * omap_device_fill_resources - fill in array of struct resource |
| * @od: struct omap_device * |
| * @res: pointer to an array of struct resource to be filled in |
| * |
| * Populate one or more empty struct resource pointed to by @res with |
| * the resource data for this omap_device @od. Used by |
| * omap_device_build_ss() after calling omap_device_count_resources(). |
| * Ideally this function would not be needed at all. If omap_device |
| * replaces platform_device, then we can specify our own |
| * get_resource()/ get_irq()/etc functions that use the underlying |
| * omap_hwmod information. Or if platform_device is extended to use |
| * subarchitecture-specific function pointers, the various |
| * platform_device functions can simply call omap_device internal |
| * functions to get device resources. Hacking around the existing |
| * platform_device code wastes memory. Returns 0. |
| */ |
| static int omap_device_fill_resources(struct omap_device *od, |
| struct resource *res) |
| { |
| int c = 0; |
| int i, r; |
| |
| for (i = 0; i < od->hwmods_cnt; i++) { |
| r = omap_hwmod_fill_resources(od->hwmods[i], res); |
| res += r; |
| c += r; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * omap_device_alloc - allocate an omap_device |
| * @pdev: platform_device that will be included in this omap_device |
| * @oh: ptr to the single omap_hwmod that backs this omap_device |
| * @pdata: platform_data ptr to associate with the platform_device |
| * @pdata_len: amount of memory pointed to by @pdata |
| * @pm_lats: pointer to a omap_device_pm_latency array for this device |
| * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats |
| * |
| * Convenience function for allocating an omap_device structure and filling |
| * hwmods, resources and pm_latency attributes. |
| * |
| * Returns an struct omap_device pointer or ERR_PTR() on error; |
| */ |
| static struct omap_device *omap_device_alloc(struct platform_device *pdev, |
| struct omap_hwmod **ohs, int oh_cnt, |
| struct omap_device_pm_latency *pm_lats, |
| int pm_lats_cnt) |
| { |
| int ret = -ENOMEM; |
| struct omap_device *od; |
| struct resource *res = NULL; |
| int i, res_count; |
| struct omap_hwmod **hwmods; |
| |
| od = kzalloc(sizeof(struct omap_device), GFP_KERNEL); |
| if (!od) { |
| ret = -ENOMEM; |
| goto oda_exit1; |
| } |
| od->hwmods_cnt = oh_cnt; |
| |
| hwmods = kmemdup(ohs, sizeof(struct omap_hwmod *) * oh_cnt, GFP_KERNEL); |
| if (!hwmods) |
| goto oda_exit2; |
| |
| od->hwmods = hwmods; |
| od->pdev = pdev; |
| |
| /* |
| * HACK: Ideally the resources from DT should match, and hwmod |
| * should just add the missing ones. Since the name is not |
| * properly populated by DT, stick to hwmod resources only. |
| */ |
| if (pdev->num_resources && pdev->resource) |
| dev_warn(&pdev->dev, "%s(): resources already allocated %d\n", |
| __func__, pdev->num_resources); |
| |
| res_count = omap_device_count_resources(od); |
| if (res_count > 0) { |
| dev_dbg(&pdev->dev, "%s(): resources allocated from hwmod %d\n", |
| __func__, res_count); |
| res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL); |
| if (!res) |
| goto oda_exit3; |
| |
| omap_device_fill_resources(od, res); |
| |
| ret = platform_device_add_resources(pdev, res, res_count); |
| kfree(res); |
| |
| if (ret) |
| goto oda_exit3; |
| } |
| |
| if (!pm_lats) { |
| pm_lats = omap_default_latency; |
| pm_lats_cnt = ARRAY_SIZE(omap_default_latency); |
| } |
| |
| od->pm_lats_cnt = pm_lats_cnt; |
| od->pm_lats = kmemdup(pm_lats, |
| sizeof(struct omap_device_pm_latency) * pm_lats_cnt, |
| GFP_KERNEL); |
| if (!od->pm_lats) |
| goto oda_exit3; |
| |
| pdev->archdata.od = od; |
| |
| for (i = 0; i < oh_cnt; i++) { |
| hwmods[i]->od = od; |
| _add_hwmod_clocks_clkdev(od, hwmods[i]); |
| } |
| |
| return od; |
| |
| oda_exit3: |
| kfree(hwmods); |
| oda_exit2: |
| kfree(od); |
| oda_exit1: |
| dev_err(&pdev->dev, "omap_device: build failed (%d)\n", ret); |
| |
| return ERR_PTR(ret); |
| } |
| |
| static void omap_device_delete(struct omap_device *od) |
| { |
| if (!od) |
| return; |
| |
| od->pdev->archdata.od = NULL; |
| kfree(od->pm_lats); |
| kfree(od->hwmods); |
| kfree(od); |
| } |
| |
| /** |
| * omap_device_build - build and register an omap_device with one omap_hwmod |
| * @pdev_name: name of the platform_device driver to use |
| * @pdev_id: this platform_device's connection ID |
| * @oh: ptr to the single omap_hwmod that backs this omap_device |
| * @pdata: platform_data ptr to associate with the platform_device |
| * @pdata_len: amount of memory pointed to by @pdata |
| * @pm_lats: pointer to a omap_device_pm_latency array for this device |
| * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats |
| * @is_early_device: should the device be registered as an early device or not |
| * |
| * Convenience function for building and registering a single |
| * omap_device record, which in turn builds and registers a |
| * platform_device record. See omap_device_build_ss() for more |
| * information. Returns ERR_PTR(-EINVAL) if @oh is NULL; otherwise, |
| * passes along the return value of omap_device_build_ss(). |
| */ |
| struct platform_device *omap_device_build(const char *pdev_name, int pdev_id, |
| struct omap_hwmod *oh, void *pdata, |
| int pdata_len, |
| struct omap_device_pm_latency *pm_lats, |
| int pm_lats_cnt, int is_early_device) |
| { |
| struct omap_hwmod *ohs[] = { oh }; |
| |
| if (!oh) |
| return ERR_PTR(-EINVAL); |
| |
| return omap_device_build_ss(pdev_name, pdev_id, ohs, 1, pdata, |
| pdata_len, pm_lats, pm_lats_cnt, |
| is_early_device); |
| } |
| |
| /** |
| * omap_device_build_ss - build and register an omap_device with multiple hwmods |
| * @pdev_name: name of the platform_device driver to use |
| * @pdev_id: this platform_device's connection ID |
| * @oh: ptr to the single omap_hwmod that backs this omap_device |
| * @pdata: platform_data ptr to associate with the platform_device |
| * @pdata_len: amount of memory pointed to by @pdata |
| * @pm_lats: pointer to a omap_device_pm_latency array for this device |
| * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats |
| * @is_early_device: should the device be registered as an early device or not |
| * |
| * Convenience function for building and registering an omap_device |
| * subsystem record. Subsystem records consist of multiple |
| * omap_hwmods. This function in turn builds and registers a |
| * platform_device record. Returns an ERR_PTR() on error, or passes |
| * along the return value of omap_device_register(). |
| */ |
| struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id, |
| struct omap_hwmod **ohs, int oh_cnt, |
| void *pdata, int pdata_len, |
| struct omap_device_pm_latency *pm_lats, |
| int pm_lats_cnt, int is_early_device) |
| { |
| int ret = -ENOMEM; |
| struct platform_device *pdev; |
| struct omap_device *od; |
| |
| if (!ohs || oh_cnt == 0 || !pdev_name) |
| return ERR_PTR(-EINVAL); |
| |
| if (!pdata && pdata_len > 0) |
| return ERR_PTR(-EINVAL); |
| |
| pdev = platform_device_alloc(pdev_name, pdev_id); |
| if (!pdev) { |
| ret = -ENOMEM; |
| goto odbs_exit; |
| } |
| |
| /* Set the dev_name early to allow dev_xxx in omap_device_alloc */ |
| if (pdev->id != -1) |
| dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id); |
| else |
| dev_set_name(&pdev->dev, "%s", pdev->name); |
| |
| od = omap_device_alloc(pdev, ohs, oh_cnt, pm_lats, pm_lats_cnt); |
| if (!od) |
| goto odbs_exit1; |
| |
| ret = platform_device_add_data(pdev, pdata, pdata_len); |
| if (ret) |
| goto odbs_exit2; |
| |
| if (is_early_device) |
| ret = omap_early_device_register(pdev); |
| else |
| ret = omap_device_register(pdev); |
| if (ret) |
| goto odbs_exit2; |
| |
| return pdev; |
| |
| odbs_exit2: |
| omap_device_delete(od); |
| odbs_exit1: |
| platform_device_put(pdev); |
| odbs_exit: |
| |
| pr_err("omap_device: %s: build failed (%d)\n", pdev_name, ret); |
| |
| return ERR_PTR(ret); |
| } |
| |
| /** |
| * omap_early_device_register - register an omap_device as an early platform |
| * device. |
| * @od: struct omap_device * to register |
| * |
| * Register the omap_device structure. This currently just calls |
| * platform_early_add_device() on the underlying platform_device. |
| * Returns 0 by default. |
| */ |
| static int omap_early_device_register(struct platform_device *pdev) |
| { |
| struct platform_device *devices[1]; |
| |
| devices[0] = pdev; |
| early_platform_add_devices(devices, 1); |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_RUNTIME |
| static int _od_runtime_suspend(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| int ret; |
| |
| ret = pm_generic_runtime_suspend(dev); |
| |
| if (!ret) |
| omap_device_idle(pdev); |
| |
| return ret; |
| } |
| |
| static int _od_runtime_idle(struct device *dev) |
| { |
| return pm_generic_runtime_idle(dev); |
| } |
| |
| static int _od_runtime_resume(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| |
| omap_device_enable(pdev); |
| |
| return pm_generic_runtime_resume(dev); |
| } |
| #endif |
| |
| #ifdef CONFIG_SUSPEND |
| static int _od_suspend_noirq(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct omap_device *od = to_omap_device(pdev); |
| int ret; |
| |
| if (od->flags & OMAP_DEVICE_NO_IDLE_ON_SUSPEND) |
| return pm_generic_suspend_noirq(dev); |
| |
| ret = pm_generic_suspend_noirq(dev); |
| |
| if (!ret && !pm_runtime_status_suspended(dev)) { |
| if (pm_generic_runtime_suspend(dev) == 0) { |
| omap_device_idle(pdev); |
| od->flags |= OMAP_DEVICE_SUSPENDED; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static int _od_resume_noirq(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct omap_device *od = to_omap_device(pdev); |
| |
| if (od->flags & OMAP_DEVICE_NO_IDLE_ON_SUSPEND) |
| return pm_generic_resume_noirq(dev); |
| |
| if ((od->flags & OMAP_DEVICE_SUSPENDED) && |
| !pm_runtime_status_suspended(dev)) { |
| od->flags &= ~OMAP_DEVICE_SUSPENDED; |
| omap_device_enable(pdev); |
| pm_generic_runtime_resume(dev); |
| } |
| |
| return pm_generic_resume_noirq(dev); |
| } |
| #else |
| #define _od_suspend_noirq NULL |
| #define _od_resume_noirq NULL |
| #endif |
| |
| static struct dev_pm_domain omap_device_pm_domain = { |
| .ops = { |
| SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume, |
| _od_runtime_idle) |
| USE_PLATFORM_PM_SLEEP_OPS |
| .suspend_noirq = _od_suspend_noirq, |
| .resume_noirq = _od_resume_noirq, |
| } |
| }; |
| |
| /** |
| * omap_device_register - register an omap_device with one omap_hwmod |
| * @od: struct omap_device * to register |
| * |
| * Register the omap_device structure. This currently just calls |
| * platform_device_register() on the underlying platform_device. |
| * Returns the return value of platform_device_register(). |
| */ |
| static int omap_device_register(struct platform_device *pdev) |
| { |
| pr_debug("omap_device: %s: registering\n", pdev->name); |
| |
| pdev->dev.parent = &omap_device_parent; |
| pdev->dev.pm_domain = &omap_device_pm_domain; |
| return platform_device_add(pdev); |
| } |
| |
| |
| /* Public functions for use by device drivers through struct platform_data */ |
| |
| /** |
| * omap_device_enable - fully activate an omap_device |
| * @od: struct omap_device * to activate |
| * |
| * Do whatever is necessary for the hwmods underlying omap_device @od |
| * to be accessible and ready to operate. This generally involves |
| * enabling clocks, setting SYSCONFIG registers; and in the future may |
| * involve remuxing pins. Device drivers should call this function |
| * (through platform_data function pointers) where they would normally |
| * enable clocks, etc. Returns -EINVAL if called when the omap_device |
| * is already enabled, or passes along the return value of |
| * _omap_device_activate(). |
| */ |
| int omap_device_enable(struct platform_device *pdev) |
| { |
| int ret; |
| struct omap_device *od; |
| |
| od = to_omap_device(pdev); |
| |
| if (od->_state == OMAP_DEVICE_STATE_ENABLED) { |
| dev_warn(&pdev->dev, |
| "omap_device: %s() called from invalid state %d\n", |
| __func__, od->_state); |
| return -EINVAL; |
| } |
| |
| /* Enable everything if we're enabling this device from scratch */ |
| if (od->_state == OMAP_DEVICE_STATE_UNKNOWN) |
| od->pm_lat_level = od->pm_lats_cnt; |
| |
| ret = _omap_device_activate(od, IGNORE_WAKEUP_LAT); |
| |
| od->dev_wakeup_lat = 0; |
| od->_dev_wakeup_lat_limit = UINT_MAX; |
| od->_state = OMAP_DEVICE_STATE_ENABLED; |
| |
| return ret; |
| } |
| |
| /** |
| * omap_device_idle - idle an omap_device |
| * @od: struct omap_device * to idle |
| * |
| * Idle omap_device @od by calling as many .deactivate_func() entries |
| * in the omap_device's pm_lats table as is possible without exceeding |
| * the device's maximum wakeup latency limit, pm_lat_limit. Device |
| * drivers should call this function (through platform_data function |
| * pointers) where they would normally disable clocks after operations |
| * complete, etc.. Returns -EINVAL if the omap_device is not |
| * currently enabled, or passes along the return value of |
| * _omap_device_deactivate(). |
| */ |
| int omap_device_idle(struct platform_device *pdev) |
| { |
| int ret; |
| struct omap_device *od; |
| |
| od = to_omap_device(pdev); |
| |
| if (od->_state != OMAP_DEVICE_STATE_ENABLED) { |
| dev_warn(&pdev->dev, |
| "omap_device: %s() called from invalid state %d\n", |
| __func__, od->_state); |
| return -EINVAL; |
| } |
| |
| ret = _omap_device_deactivate(od, USE_WAKEUP_LAT); |
| |
| od->_state = OMAP_DEVICE_STATE_IDLE; |
| |
| return ret; |
| } |
| |
| /** |
| * omap_device_shutdown - shut down an omap_device |
| * @od: struct omap_device * to shut down |
| * |
| * Shut down omap_device @od by calling all .deactivate_func() entries |
| * in the omap_device's pm_lats table and then shutting down all of |
| * the underlying omap_hwmods. Used when a device is being "removed" |
| * or a device driver is being unloaded. Returns -EINVAL if the |
| * omap_device is not currently enabled or idle, or passes along the |
| * return value of _omap_device_deactivate(). |
| */ |
| int omap_device_shutdown(struct platform_device *pdev) |
| { |
| int ret, i; |
| struct omap_device *od; |
| |
| od = to_omap_device(pdev); |
| |
| if (od->_state != OMAP_DEVICE_STATE_ENABLED && |
| od->_state != OMAP_DEVICE_STATE_IDLE) { |
| dev_warn(&pdev->dev, |
| "omap_device: %s() called from invalid state %d\n", |
| __func__, od->_state); |
| return -EINVAL; |
| } |
| |
| ret = _omap_device_deactivate(od, IGNORE_WAKEUP_LAT); |
| |
| for (i = 0; i < od->hwmods_cnt; i++) |
| omap_hwmod_shutdown(od->hwmods[i]); |
| |
| od->_state = OMAP_DEVICE_STATE_SHUTDOWN; |
| |
| return ret; |
| } |
| |
| /** |
| * omap_device_align_pm_lat - activate/deactivate device to match wakeup lat lim |
| * @od: struct omap_device * |
| * |
| * When a device's maximum wakeup latency limit changes, call some of |
| * the .activate_func or .deactivate_func function pointers in the |
| * omap_device's pm_lats array to ensure that the device's maximum |
| * wakeup latency is less than or equal to the new latency limit. |
| * Intended to be called by OMAP PM code whenever a device's maximum |
| * wakeup latency limit changes (e.g., via |
| * omap_pm_set_dev_wakeup_lat()). Returns 0 if nothing needs to be |
| * done (e.g., if the omap_device is not currently idle, or if the |
| * wakeup latency is already current with the new limit) or passes |
| * along the return value of _omap_device_deactivate() or |
| * _omap_device_activate(). |
| */ |
| int omap_device_align_pm_lat(struct platform_device *pdev, |
| u32 new_wakeup_lat_limit) |
| { |
| int ret = -EINVAL; |
| struct omap_device *od; |
| |
| od = to_omap_device(pdev); |
| |
| if (new_wakeup_lat_limit == od->dev_wakeup_lat) |
| return 0; |
| |
| od->_dev_wakeup_lat_limit = new_wakeup_lat_limit; |
| |
| if (od->_state != OMAP_DEVICE_STATE_IDLE) |
| return 0; |
| else if (new_wakeup_lat_limit > od->dev_wakeup_lat) |
| ret = _omap_device_deactivate(od, USE_WAKEUP_LAT); |
| else if (new_wakeup_lat_limit < od->dev_wakeup_lat) |
| ret = _omap_device_activate(od, USE_WAKEUP_LAT); |
| |
| return ret; |
| } |
| |
| /** |
| * omap_device_get_pwrdm - return the powerdomain * associated with @od |
| * @od: struct omap_device * |
| * |
| * Return the powerdomain associated with the first underlying |
| * omap_hwmod for this omap_device. Intended for use by core OMAP PM |
| * code. Returns NULL on error or a struct powerdomain * upon |
| * success. |
| */ |
| struct powerdomain *omap_device_get_pwrdm(struct omap_device *od) |
| { |
| /* |
| * XXX Assumes that all omap_hwmod powerdomains are identical. |
| * This may not necessarily be true. There should be a sanity |
| * check in here to WARN() if any difference appears. |
| */ |
| if (!od->hwmods_cnt) |
| return NULL; |
| |
| return omap_hwmod_get_pwrdm(od->hwmods[0]); |
| } |
| |
| /** |
| * omap_device_get_mpu_rt_va - return the MPU's virtual addr for the hwmod base |
| * @od: struct omap_device * |
| * |
| * Return the MPU's virtual address for the base of the hwmod, from |
| * the ioremap() that the hwmod code does. Only valid if there is one |
| * hwmod associated with this device. Returns NULL if there are zero |
| * or more than one hwmods associated with this omap_device; |
| * otherwise, passes along the return value from |
| * omap_hwmod_get_mpu_rt_va(). |
| */ |
| void __iomem *omap_device_get_rt_va(struct omap_device *od) |
| { |
| if (od->hwmods_cnt != 1) |
| return NULL; |
| |
| return omap_hwmod_get_mpu_rt_va(od->hwmods[0]); |
| } |
| |
| /** |
| * omap_device_get_by_hwmod_name() - convert a hwmod name to |
| * device pointer. |
| * @oh_name: name of the hwmod device |
| * |
| * Returns back a struct device * pointer associated with a hwmod |
| * device represented by a hwmod_name |
| */ |
| struct device *omap_device_get_by_hwmod_name(const char *oh_name) |
| { |
| struct omap_hwmod *oh; |
| |
| if (!oh_name) { |
| WARN(1, "%s: no hwmod name!\n", __func__); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| oh = omap_hwmod_lookup(oh_name); |
| if (IS_ERR_OR_NULL(oh)) { |
| WARN(1, "%s: no hwmod for %s\n", __func__, |
| oh_name); |
| return ERR_PTR(oh ? PTR_ERR(oh) : -ENODEV); |
| } |
| if (IS_ERR_OR_NULL(oh->od)) { |
| WARN(1, "%s: no omap_device for %s\n", __func__, |
| oh_name); |
| return ERR_PTR(oh->od ? PTR_ERR(oh->od) : -ENODEV); |
| } |
| |
| if (IS_ERR_OR_NULL(oh->od->pdev)) |
| return ERR_PTR(oh->od->pdev ? PTR_ERR(oh->od->pdev) : -ENODEV); |
| |
| return &oh->od->pdev->dev; |
| } |
| EXPORT_SYMBOL(omap_device_get_by_hwmod_name); |
| |
| /* |
| * Public functions intended for use in omap_device_pm_latency |
| * .activate_func and .deactivate_func function pointers |
| */ |
| |
| /** |
| * omap_device_enable_hwmods - call omap_hwmod_enable() on all hwmods |
| * @od: struct omap_device *od |
| * |
| * Enable all underlying hwmods. Returns 0. |
| */ |
| int omap_device_enable_hwmods(struct omap_device *od) |
| { |
| int i; |
| |
| for (i = 0; i < od->hwmods_cnt; i++) |
| omap_hwmod_enable(od->hwmods[i]); |
| |
| /* XXX pass along return value here? */ |
| return 0; |
| } |
| |
| /** |
| * omap_device_idle_hwmods - call omap_hwmod_idle() on all hwmods |
| * @od: struct omap_device *od |
| * |
| * Idle all underlying hwmods. Returns 0. |
| */ |
| int omap_device_idle_hwmods(struct omap_device *od) |
| { |
| int i; |
| |
| for (i = 0; i < od->hwmods_cnt; i++) |
| omap_hwmod_idle(od->hwmods[i]); |
| |
| /* XXX pass along return value here? */ |
| return 0; |
| } |
| |
| /** |
| * omap_device_disable_clocks - disable all main and interface clocks |
| * @od: struct omap_device *od |
| * |
| * Disable the main functional clock and interface clock for all of the |
| * omap_hwmods associated with the omap_device. Returns 0. |
| */ |
| int omap_device_disable_clocks(struct omap_device *od) |
| { |
| int i; |
| |
| for (i = 0; i < od->hwmods_cnt; i++) |
| omap_hwmod_disable_clocks(od->hwmods[i]); |
| |
| /* XXX pass along return value here? */ |
| return 0; |
| } |
| |
| /** |
| * omap_device_enable_clocks - enable all main and interface clocks |
| * @od: struct omap_device *od |
| * |
| * Enable the main functional clock and interface clock for all of the |
| * omap_hwmods associated with the omap_device. Returns 0. |
| */ |
| int omap_device_enable_clocks(struct omap_device *od) |
| { |
| int i; |
| |
| for (i = 0; i < od->hwmods_cnt; i++) |
| omap_hwmod_enable_clocks(od->hwmods[i]); |
| |
| /* XXX pass along return value here? */ |
| return 0; |
| } |
| |
| struct device omap_device_parent = { |
| .init_name = "omap", |
| .parent = &platform_bus, |
| }; |
| |
| static struct notifier_block platform_nb = { |
| .notifier_call = _omap_device_notifier_call, |
| }; |
| |
| static int __init omap_device_init(void) |
| { |
| bus_register_notifier(&platform_bus_type, &platform_nb); |
| return device_register(&omap_device_parent); |
| } |
| core_initcall(omap_device_init); |