| /* |
| * Copyright 2005-2009 MontaVista Software, Inc. |
| * Copyright 2008,2012 Freescale Semiconductor, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY |
| * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software Foundation, |
| * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| * Ported to 834x by Randy Vinson <rvinson@mvista.com> using code provided |
| * by Hunter Wu. |
| * Power Management support by Dave Liu <daveliu@freescale.com>, |
| * Jerry Huang <Chang-Ming.Huang@freescale.com> and |
| * Anton Vorontsov <avorontsov@ru.mvista.com>. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/types.h> |
| #include <linux/delay.h> |
| #include <linux/pm.h> |
| #include <linux/err.h> |
| #include <linux/platform_device.h> |
| #include <linux/fsl_devices.h> |
| |
| #include "ehci-fsl.h" |
| |
| /* configure so an HC device and id are always provided */ |
| /* always called with process context; sleeping is OK */ |
| |
| /** |
| * usb_hcd_fsl_probe - initialize FSL-based HCDs |
| * @drvier: Driver to be used for this HCD |
| * @pdev: USB Host Controller being probed |
| * Context: !in_interrupt() |
| * |
| * Allocates basic resources for this USB host controller. |
| * |
| */ |
| static int usb_hcd_fsl_probe(const struct hc_driver *driver, |
| struct platform_device *pdev) |
| { |
| struct fsl_usb2_platform_data *pdata; |
| struct usb_hcd *hcd; |
| struct resource *res; |
| int irq; |
| int retval; |
| |
| pr_debug("initializing FSL-SOC USB Controller\n"); |
| |
| /* Need platform data for setup */ |
| pdata = dev_get_platdata(&pdev->dev); |
| if (!pdata) { |
| dev_err(&pdev->dev, |
| "No platform data for %s.\n", dev_name(&pdev->dev)); |
| return -ENODEV; |
| } |
| |
| /* |
| * This is a host mode driver, verify that we're supposed to be |
| * in host mode. |
| */ |
| if (!((pdata->operating_mode == FSL_USB2_DR_HOST) || |
| (pdata->operating_mode == FSL_USB2_MPH_HOST) || |
| (pdata->operating_mode == FSL_USB2_DR_OTG))) { |
| dev_err(&pdev->dev, |
| "Non Host Mode configured for %s. Wrong driver linked.\n", |
| dev_name(&pdev->dev)); |
| return -ENODEV; |
| } |
| |
| res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); |
| if (!res) { |
| dev_err(&pdev->dev, |
| "Found HC with no IRQ. Check %s setup!\n", |
| dev_name(&pdev->dev)); |
| return -ENODEV; |
| } |
| irq = res->start; |
| |
| hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); |
| if (!hcd) { |
| retval = -ENOMEM; |
| goto err1; |
| } |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) { |
| dev_err(&pdev->dev, |
| "Found HC with no register addr. Check %s setup!\n", |
| dev_name(&pdev->dev)); |
| retval = -ENODEV; |
| goto err2; |
| } |
| hcd->rsrc_start = res->start; |
| hcd->rsrc_len = resource_size(res); |
| if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, |
| driver->description)) { |
| dev_dbg(&pdev->dev, "controller already in use\n"); |
| retval = -EBUSY; |
| goto err2; |
| } |
| hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); |
| |
| if (hcd->regs == NULL) { |
| dev_dbg(&pdev->dev, "error mapping memory\n"); |
| retval = -EFAULT; |
| goto err3; |
| } |
| |
| pdata->regs = hcd->regs; |
| |
| if (pdata->power_budget) |
| hcd->power_budget = pdata->power_budget; |
| |
| /* |
| * do platform specific init: check the clock, grab/config pins, etc. |
| */ |
| if (pdata->init && pdata->init(pdev)) { |
| retval = -ENODEV; |
| goto err4; |
| } |
| |
| /* Enable USB controller, 83xx or 8536 */ |
| if (pdata->have_sysif_regs && pdata->controller_ver < FSL_USB_VER_1_6) |
| setbits32(hcd->regs + FSL_SOC_USB_CTRL, 0x4); |
| |
| /* Don't need to set host mode here. It will be done by tdi_reset() */ |
| |
| retval = usb_add_hcd(hcd, irq, IRQF_SHARED); |
| if (retval != 0) |
| goto err4; |
| device_wakeup_enable(hcd->self.controller); |
| |
| #ifdef CONFIG_USB_OTG |
| if (pdata->operating_mode == FSL_USB2_DR_OTG) { |
| struct ehci_hcd *ehci = hcd_to_ehci(hcd); |
| |
| hcd->phy = usb_get_phy(USB_PHY_TYPE_USB2); |
| dev_dbg(&pdev->dev, "hcd=0x%p ehci=0x%p, phy=0x%p\n", |
| hcd, ehci, hcd->phy); |
| |
| if (!IS_ERR_OR_NULL(hcd->phy)) { |
| retval = otg_set_host(hcd->phy->otg, |
| &ehci_to_hcd(ehci)->self); |
| if (retval) { |
| usb_put_phy(hcd->phy); |
| goto err4; |
| } |
| } else { |
| dev_err(&pdev->dev, "can't find phy\n"); |
| retval = -ENODEV; |
| goto err4; |
| } |
| } |
| #endif |
| return retval; |
| |
| err4: |
| iounmap(hcd->regs); |
| err3: |
| release_mem_region(hcd->rsrc_start, hcd->rsrc_len); |
| err2: |
| usb_put_hcd(hcd); |
| err1: |
| dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), retval); |
| if (pdata->exit) |
| pdata->exit(pdev); |
| return retval; |
| } |
| |
| /* may be called without controller electrically present */ |
| /* may be called with controller, bus, and devices active */ |
| |
| /** |
| * usb_hcd_fsl_remove - shutdown processing for FSL-based HCDs |
| * @dev: USB Host Controller being removed |
| * Context: !in_interrupt() |
| * |
| * Reverses the effect of usb_hcd_fsl_probe(). |
| * |
| */ |
| static void usb_hcd_fsl_remove(struct usb_hcd *hcd, |
| struct platform_device *pdev) |
| { |
| struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev); |
| |
| if (!IS_ERR_OR_NULL(hcd->phy)) { |
| otg_set_host(hcd->phy->otg, NULL); |
| usb_put_phy(hcd->phy); |
| } |
| |
| usb_remove_hcd(hcd); |
| |
| /* |
| * do platform specific un-initialization: |
| * release iomux pins, disable clock, etc. |
| */ |
| if (pdata->exit) |
| pdata->exit(pdev); |
| iounmap(hcd->regs); |
| release_mem_region(hcd->rsrc_start, hcd->rsrc_len); |
| usb_put_hcd(hcd); |
| } |
| |
| static int ehci_fsl_setup_phy(struct usb_hcd *hcd, |
| enum fsl_usb2_phy_modes phy_mode, |
| unsigned int port_offset) |
| { |
| u32 portsc; |
| struct ehci_hcd *ehci = hcd_to_ehci(hcd); |
| void __iomem *non_ehci = hcd->regs; |
| struct device *dev = hcd->self.controller; |
| struct fsl_usb2_platform_data *pdata = dev_get_platdata(dev); |
| |
| if (pdata->controller_ver < 0) { |
| dev_warn(hcd->self.controller, "Could not get controller version\n"); |
| return -ENODEV; |
| } |
| |
| portsc = ehci_readl(ehci, &ehci->regs->port_status[port_offset]); |
| portsc &= ~(PORT_PTS_MSK | PORT_PTS_PTW); |
| |
| switch (phy_mode) { |
| case FSL_USB2_PHY_ULPI: |
| if (pdata->have_sysif_regs && pdata->controller_ver) { |
| /* controller version 1.6 or above */ |
| clrbits32(non_ehci + FSL_SOC_USB_CTRL, UTMI_PHY_EN); |
| setbits32(non_ehci + FSL_SOC_USB_CTRL, |
| ULPI_PHY_CLK_SEL | USB_CTRL_USB_EN); |
| } |
| portsc |= PORT_PTS_ULPI; |
| break; |
| case FSL_USB2_PHY_SERIAL: |
| portsc |= PORT_PTS_SERIAL; |
| break; |
| case FSL_USB2_PHY_UTMI_WIDE: |
| portsc |= PORT_PTS_PTW; |
| /* fall through */ |
| case FSL_USB2_PHY_UTMI: |
| if (pdata->have_sysif_regs && pdata->controller_ver) { |
| /* controller version 1.6 or above */ |
| setbits32(non_ehci + FSL_SOC_USB_CTRL, UTMI_PHY_EN); |
| mdelay(FSL_UTMI_PHY_DLY); /* Delay for UTMI PHY CLK to |
| become stable - 10ms*/ |
| } |
| /* enable UTMI PHY */ |
| if (pdata->have_sysif_regs) |
| setbits32(non_ehci + FSL_SOC_USB_CTRL, |
| CTRL_UTMI_PHY_EN); |
| portsc |= PORT_PTS_UTMI; |
| break; |
| case FSL_USB2_PHY_NONE: |
| break; |
| } |
| |
| if (pdata->have_sysif_regs && pdata->controller_ver && |
| (phy_mode == FSL_USB2_PHY_ULPI)) { |
| /* check PHY_CLK_VALID to get phy clk valid */ |
| if (!(spin_event_timeout(in_be32(non_ehci + FSL_SOC_USB_CTRL) & |
| PHY_CLK_VALID, FSL_USB_PHY_CLK_TIMEOUT, 0) || |
| in_be32(non_ehci + FSL_SOC_USB_PRICTRL))) { |
| dev_warn(hcd->self.controller, "USB PHY clock invalid\n"); |
| return -EINVAL; |
| } |
| } |
| |
| ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]); |
| |
| if (phy_mode != FSL_USB2_PHY_ULPI && pdata->have_sysif_regs) |
| setbits32(non_ehci + FSL_SOC_USB_CTRL, USB_CTRL_USB_EN); |
| |
| return 0; |
| } |
| |
| static int ehci_fsl_usb_setup(struct ehci_hcd *ehci) |
| { |
| struct usb_hcd *hcd = ehci_to_hcd(ehci); |
| struct fsl_usb2_platform_data *pdata; |
| void __iomem *non_ehci = hcd->regs; |
| |
| pdata = dev_get_platdata(hcd->self.controller); |
| |
| if (pdata->have_sysif_regs) { |
| /* |
| * Turn on cache snooping hardware, since some PowerPC platforms |
| * wholly rely on hardware to deal with cache coherent |
| */ |
| |
| /* Setup Snooping for all the 4GB space */ |
| /* SNOOP1 starts from 0x0, size 2G */ |
| out_be32(non_ehci + FSL_SOC_USB_SNOOP1, 0x0 | SNOOP_SIZE_2GB); |
| /* SNOOP2 starts from 0x80000000, size 2G */ |
| out_be32(non_ehci + FSL_SOC_USB_SNOOP2, 0x80000000 | SNOOP_SIZE_2GB); |
| } |
| |
| if ((pdata->operating_mode == FSL_USB2_DR_HOST) || |
| (pdata->operating_mode == FSL_USB2_DR_OTG)) |
| if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0)) |
| return -EINVAL; |
| |
| if (pdata->operating_mode == FSL_USB2_MPH_HOST) { |
| unsigned int chip, rev, svr; |
| |
| svr = mfspr(SPRN_SVR); |
| chip = svr >> 16; |
| rev = (svr >> 4) & 0xf; |
| |
| /* Deal with USB Erratum #14 on MPC834x Rev 1.0 & 1.1 chips */ |
| if ((rev == 1) && (chip >= 0x8050) && (chip <= 0x8055)) |
| ehci->has_fsl_port_bug = 1; |
| |
| if (pdata->port_enables & FSL_USB2_PORT0_ENABLED) |
| if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0)) |
| return -EINVAL; |
| |
| if (pdata->port_enables & FSL_USB2_PORT1_ENABLED) |
| if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 1)) |
| return -EINVAL; |
| } |
| |
| if (pdata->have_sysif_regs) { |
| #ifdef CONFIG_FSL_SOC_BOOKE |
| out_be32(non_ehci + FSL_SOC_USB_PRICTRL, 0x00000008); |
| out_be32(non_ehci + FSL_SOC_USB_AGECNTTHRSH, 0x00000080); |
| #else |
| out_be32(non_ehci + FSL_SOC_USB_PRICTRL, 0x0000000c); |
| out_be32(non_ehci + FSL_SOC_USB_AGECNTTHRSH, 0x00000040); |
| #endif |
| out_be32(non_ehci + FSL_SOC_USB_SICTRL, 0x00000001); |
| } |
| |
| return 0; |
| } |
| |
| /* called after powerup, by probe or system-pm "wakeup" */ |
| static int ehci_fsl_reinit(struct ehci_hcd *ehci) |
| { |
| if (ehci_fsl_usb_setup(ehci)) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| /* called during probe() after chip reset completes */ |
| static int ehci_fsl_setup(struct usb_hcd *hcd) |
| { |
| struct ehci_hcd *ehci = hcd_to_ehci(hcd); |
| int retval; |
| struct fsl_usb2_platform_data *pdata; |
| struct device *dev; |
| |
| dev = hcd->self.controller; |
| pdata = dev_get_platdata(hcd->self.controller); |
| ehci->big_endian_desc = pdata->big_endian_desc; |
| ehci->big_endian_mmio = pdata->big_endian_mmio; |
| |
| /* EHCI registers start at offset 0x100 */ |
| ehci->caps = hcd->regs + 0x100; |
| |
| #ifdef CONFIG_PPC_83xx |
| /* |
| * Deal with MPC834X that need port power to be cycled after the power |
| * fault condition is removed. Otherwise the state machine does not |
| * reflect PORTSC[CSC] correctly. |
| */ |
| ehci->need_oc_pp_cycle = 1; |
| #endif |
| |
| hcd->has_tt = 1; |
| |
| retval = ehci_setup(hcd); |
| if (retval) |
| return retval; |
| |
| if (of_device_is_compatible(dev->parent->of_node, |
| "fsl,mpc5121-usb2-dr")) { |
| /* |
| * set SBUSCFG:AHBBRST so that control msgs don't |
| * fail when doing heavy PATA writes. |
| */ |
| ehci_writel(ehci, SBUSCFG_INCR8, |
| hcd->regs + FSL_SOC_USB_SBUSCFG); |
| } |
| |
| retval = ehci_fsl_reinit(ehci); |
| return retval; |
| } |
| |
| struct ehci_fsl { |
| struct ehci_hcd ehci; |
| |
| #ifdef CONFIG_PM |
| /* Saved USB PHY settings, need to restore after deep sleep. */ |
| u32 usb_ctrl; |
| #endif |
| }; |
| |
| #ifdef CONFIG_PM |
| |
| #ifdef CONFIG_PPC_MPC512x |
| static int ehci_fsl_mpc512x_drv_suspend(struct device *dev) |
| { |
| struct usb_hcd *hcd = dev_get_drvdata(dev); |
| struct ehci_hcd *ehci = hcd_to_ehci(hcd); |
| struct fsl_usb2_platform_data *pdata = dev_get_platdata(dev); |
| u32 tmp; |
| |
| #ifdef CONFIG_DYNAMIC_DEBUG |
| u32 mode = ehci_readl(ehci, hcd->regs + FSL_SOC_USB_USBMODE); |
| mode &= USBMODE_CM_MASK; |
| tmp = ehci_readl(ehci, hcd->regs + 0x140); /* usbcmd */ |
| |
| dev_dbg(dev, "suspend=%d already_suspended=%d " |
| "mode=%d usbcmd %08x\n", pdata->suspended, |
| pdata->already_suspended, mode, tmp); |
| #endif |
| |
| /* |
| * If the controller is already suspended, then this must be a |
| * PM suspend. Remember this fact, so that we will leave the |
| * controller suspended at PM resume time. |
| */ |
| if (pdata->suspended) { |
| dev_dbg(dev, "already suspended, leaving early\n"); |
| pdata->already_suspended = 1; |
| return 0; |
| } |
| |
| dev_dbg(dev, "suspending...\n"); |
| |
| ehci->rh_state = EHCI_RH_SUSPENDED; |
| dev->power.power_state = PMSG_SUSPEND; |
| |
| /* ignore non-host interrupts */ |
| clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); |
| |
| /* stop the controller */ |
| tmp = ehci_readl(ehci, &ehci->regs->command); |
| tmp &= ~CMD_RUN; |
| ehci_writel(ehci, tmp, &ehci->regs->command); |
| |
| /* save EHCI registers */ |
| pdata->pm_command = ehci_readl(ehci, &ehci->regs->command); |
| pdata->pm_command &= ~CMD_RUN; |
| pdata->pm_status = ehci_readl(ehci, &ehci->regs->status); |
| pdata->pm_intr_enable = ehci_readl(ehci, &ehci->regs->intr_enable); |
| pdata->pm_frame_index = ehci_readl(ehci, &ehci->regs->frame_index); |
| pdata->pm_segment = ehci_readl(ehci, &ehci->regs->segment); |
| pdata->pm_frame_list = ehci_readl(ehci, &ehci->regs->frame_list); |
| pdata->pm_async_next = ehci_readl(ehci, &ehci->regs->async_next); |
| pdata->pm_configured_flag = |
| ehci_readl(ehci, &ehci->regs->configured_flag); |
| pdata->pm_portsc = ehci_readl(ehci, &ehci->regs->port_status[0]); |
| pdata->pm_usbgenctrl = ehci_readl(ehci, |
| hcd->regs + FSL_SOC_USB_USBGENCTRL); |
| |
| /* clear the W1C bits */ |
| pdata->pm_portsc &= cpu_to_hc32(ehci, ~PORT_RWC_BITS); |
| |
| pdata->suspended = 1; |
| |
| /* clear PP to cut power to the port */ |
| tmp = ehci_readl(ehci, &ehci->regs->port_status[0]); |
| tmp &= ~PORT_POWER; |
| ehci_writel(ehci, tmp, &ehci->regs->port_status[0]); |
| |
| return 0; |
| } |
| |
| static int ehci_fsl_mpc512x_drv_resume(struct device *dev) |
| { |
| struct usb_hcd *hcd = dev_get_drvdata(dev); |
| struct ehci_hcd *ehci = hcd_to_ehci(hcd); |
| struct fsl_usb2_platform_data *pdata = dev_get_platdata(dev); |
| u32 tmp; |
| |
| dev_dbg(dev, "suspend=%d already_suspended=%d\n", |
| pdata->suspended, pdata->already_suspended); |
| |
| /* |
| * If the controller was already suspended at suspend time, |
| * then don't resume it now. |
| */ |
| if (pdata->already_suspended) { |
| dev_dbg(dev, "already suspended, leaving early\n"); |
| pdata->already_suspended = 0; |
| return 0; |
| } |
| |
| if (!pdata->suspended) { |
| dev_dbg(dev, "not suspended, leaving early\n"); |
| return 0; |
| } |
| |
| pdata->suspended = 0; |
| |
| dev_dbg(dev, "resuming...\n"); |
| |
| /* set host mode */ |
| tmp = USBMODE_CM_HOST | (pdata->es ? USBMODE_ES : 0); |
| ehci_writel(ehci, tmp, hcd->regs + FSL_SOC_USB_USBMODE); |
| |
| ehci_writel(ehci, pdata->pm_usbgenctrl, |
| hcd->regs + FSL_SOC_USB_USBGENCTRL); |
| ehci_writel(ehci, ISIPHYCTRL_PXE | ISIPHYCTRL_PHYE, |
| hcd->regs + FSL_SOC_USB_ISIPHYCTRL); |
| |
| ehci_writel(ehci, SBUSCFG_INCR8, hcd->regs + FSL_SOC_USB_SBUSCFG); |
| |
| /* restore EHCI registers */ |
| ehci_writel(ehci, pdata->pm_command, &ehci->regs->command); |
| ehci_writel(ehci, pdata->pm_intr_enable, &ehci->regs->intr_enable); |
| ehci_writel(ehci, pdata->pm_frame_index, &ehci->regs->frame_index); |
| ehci_writel(ehci, pdata->pm_segment, &ehci->regs->segment); |
| ehci_writel(ehci, pdata->pm_frame_list, &ehci->regs->frame_list); |
| ehci_writel(ehci, pdata->pm_async_next, &ehci->regs->async_next); |
| ehci_writel(ehci, pdata->pm_configured_flag, |
| &ehci->regs->configured_flag); |
| ehci_writel(ehci, pdata->pm_portsc, &ehci->regs->port_status[0]); |
| |
| set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); |
| ehci->rh_state = EHCI_RH_RUNNING; |
| dev->power.power_state = PMSG_ON; |
| |
| tmp = ehci_readl(ehci, &ehci->regs->command); |
| tmp |= CMD_RUN; |
| ehci_writel(ehci, tmp, &ehci->regs->command); |
| |
| usb_hcd_resume_root_hub(hcd); |
| |
| return 0; |
| } |
| #else |
| static inline int ehci_fsl_mpc512x_drv_suspend(struct device *dev) |
| { |
| return 0; |
| } |
| |
| static inline int ehci_fsl_mpc512x_drv_resume(struct device *dev) |
| { |
| return 0; |
| } |
| #endif /* CONFIG_PPC_MPC512x */ |
| |
| static struct ehci_fsl *hcd_to_ehci_fsl(struct usb_hcd *hcd) |
| { |
| struct ehci_hcd *ehci = hcd_to_ehci(hcd); |
| |
| return container_of(ehci, struct ehci_fsl, ehci); |
| } |
| |
| static int ehci_fsl_drv_suspend(struct device *dev) |
| { |
| struct usb_hcd *hcd = dev_get_drvdata(dev); |
| struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd); |
| void __iomem *non_ehci = hcd->regs; |
| |
| if (of_device_is_compatible(dev->parent->of_node, |
| "fsl,mpc5121-usb2-dr")) { |
| return ehci_fsl_mpc512x_drv_suspend(dev); |
| } |
| |
| ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd), |
| device_may_wakeup(dev)); |
| if (!fsl_deep_sleep()) |
| return 0; |
| |
| ehci_fsl->usb_ctrl = in_be32(non_ehci + FSL_SOC_USB_CTRL); |
| return 0; |
| } |
| |
| static int ehci_fsl_drv_resume(struct device *dev) |
| { |
| struct usb_hcd *hcd = dev_get_drvdata(dev); |
| struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd); |
| struct ehci_hcd *ehci = hcd_to_ehci(hcd); |
| void __iomem *non_ehci = hcd->regs; |
| |
| if (of_device_is_compatible(dev->parent->of_node, |
| "fsl,mpc5121-usb2-dr")) { |
| return ehci_fsl_mpc512x_drv_resume(dev); |
| } |
| |
| ehci_prepare_ports_for_controller_resume(ehci); |
| if (!fsl_deep_sleep()) |
| return 0; |
| |
| usb_root_hub_lost_power(hcd->self.root_hub); |
| |
| /* Restore USB PHY settings and enable the controller. */ |
| out_be32(non_ehci + FSL_SOC_USB_CTRL, ehci_fsl->usb_ctrl); |
| |
| ehci_reset(ehci); |
| ehci_fsl_reinit(ehci); |
| |
| return 0; |
| } |
| |
| static int ehci_fsl_drv_restore(struct device *dev) |
| { |
| struct usb_hcd *hcd = dev_get_drvdata(dev); |
| |
| usb_root_hub_lost_power(hcd->self.root_hub); |
| return 0; |
| } |
| |
| static struct dev_pm_ops ehci_fsl_pm_ops = { |
| .suspend = ehci_fsl_drv_suspend, |
| .resume = ehci_fsl_drv_resume, |
| .restore = ehci_fsl_drv_restore, |
| }; |
| |
| #define EHCI_FSL_PM_OPS (&ehci_fsl_pm_ops) |
| #else |
| #define EHCI_FSL_PM_OPS NULL |
| #endif /* CONFIG_PM */ |
| |
| #ifdef CONFIG_USB_OTG |
| static int ehci_start_port_reset(struct usb_hcd *hcd, unsigned port) |
| { |
| struct ehci_hcd *ehci = hcd_to_ehci(hcd); |
| u32 status; |
| |
| if (!port) |
| return -EINVAL; |
| |
| port--; |
| |
| /* start port reset before HNP protocol time out */ |
| status = readl(&ehci->regs->port_status[port]); |
| if (!(status & PORT_CONNECT)) |
| return -ENODEV; |
| |
| /* khubd will finish the reset later */ |
| if (ehci_is_TDI(ehci)) { |
| writel(PORT_RESET | |
| (status & ~(PORT_CSC | PORT_PEC | PORT_OCC)), |
| &ehci->regs->port_status[port]); |
| } else { |
| writel(PORT_RESET, &ehci->regs->port_status[port]); |
| } |
| |
| return 0; |
| } |
| #else |
| #define ehci_start_port_reset NULL |
| #endif /* CONFIG_USB_OTG */ |
| |
| |
| static const struct hc_driver ehci_fsl_hc_driver = { |
| .description = hcd_name, |
| .product_desc = "Freescale On-Chip EHCI Host Controller", |
| .hcd_priv_size = sizeof(struct ehci_fsl), |
| |
| /* |
| * generic hardware linkage |
| */ |
| .irq = ehci_irq, |
| .flags = HCD_USB2 | HCD_MEMORY | HCD_BH, |
| |
| /* |
| * basic lifecycle operations |
| */ |
| .reset = ehci_fsl_setup, |
| .start = ehci_run, |
| .stop = ehci_stop, |
| .shutdown = ehci_shutdown, |
| |
| /* |
| * managing i/o requests and associated device resources |
| */ |
| .urb_enqueue = ehci_urb_enqueue, |
| .urb_dequeue = ehci_urb_dequeue, |
| .endpoint_disable = ehci_endpoint_disable, |
| .endpoint_reset = ehci_endpoint_reset, |
| |
| /* |
| * scheduling support |
| */ |
| .get_frame_number = ehci_get_frame, |
| |
| /* |
| * root hub support |
| */ |
| .hub_status_data = ehci_hub_status_data, |
| .hub_control = ehci_hub_control, |
| .bus_suspend = ehci_bus_suspend, |
| .bus_resume = ehci_bus_resume, |
| .start_port_reset = ehci_start_port_reset, |
| .relinquish_port = ehci_relinquish_port, |
| .port_handed_over = ehci_port_handed_over, |
| |
| .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, |
| }; |
| |
| static int ehci_fsl_drv_probe(struct platform_device *pdev) |
| { |
| if (usb_disabled()) |
| return -ENODEV; |
| |
| /* FIXME we only want one one probe() not two */ |
| return usb_hcd_fsl_probe(&ehci_fsl_hc_driver, pdev); |
| } |
| |
| static int ehci_fsl_drv_remove(struct platform_device *pdev) |
| { |
| struct usb_hcd *hcd = platform_get_drvdata(pdev); |
| |
| /* FIXME we only want one one remove() not two */ |
| usb_hcd_fsl_remove(hcd, pdev); |
| return 0; |
| } |
| |
| MODULE_ALIAS("platform:fsl-ehci"); |
| |
| static struct platform_driver ehci_fsl_driver = { |
| .probe = ehci_fsl_drv_probe, |
| .remove = ehci_fsl_drv_remove, |
| .shutdown = usb_hcd_platform_shutdown, |
| .driver = { |
| .name = "fsl-ehci", |
| .owner = THIS_MODULE, |
| .pm = EHCI_FSL_PM_OPS, |
| }, |
| }; |