ARM: 7104/1: plat-pxa: break out GPIO driver specifics
The <mach/gpio.h> file is included from upper directories
and deal with generic GPIO and gpiolib stuff. Break out the
platform and driver specific defines and functions into its own
header file.
Cc: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/plat-pxa/include/plat/gpio-pxa.h b/arch/arm/plat-pxa/include/plat/gpio-pxa.h
new file mode 100644
index 0000000..b6390be
--- /dev/null
+++ b/arch/arm/plat-pxa/include/plat/gpio-pxa.h
@@ -0,0 +1,44 @@
+#ifndef __PLAT_PXA_GPIO_H
+#define __PLAT_PXA_GPIO_H
+
+struct irq_data;
+
+/*
+ * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with
+ * one set of registers. The register offsets are organized below:
+ *
+ * GPLR GPDR GPSR GPCR GRER GFER GEDR
+ * BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048
+ * BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C
+ * BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050
+ *
+ * BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148
+ * BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C
+ * BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150
+ *
+ * NOTE:
+ * BANK 3 is only available on PXA27x and later processors.
+ * BANK 4 and 5 are only available on PXA935
+ */
+
+#define GPIO_BANK(n) (GPIO_REGS_VIRT + BANK_OFF(n))
+
+#define GPLR_OFFSET 0x00
+#define GPDR_OFFSET 0x0C
+#define GPSR_OFFSET 0x18
+#define GPCR_OFFSET 0x24
+#define GRER_OFFSET 0x30
+#define GFER_OFFSET 0x3C
+#define GEDR_OFFSET 0x48
+
+/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
+ * Those cases currently cause holes in the GPIO number space, the
+ * actual number of the last GPIO is recorded by 'pxa_last_gpio'.
+ */
+extern int pxa_last_gpio;
+
+typedef int (*set_wake_t)(struct irq_data *d, unsigned int on);
+
+extern void pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn);
+
+#endif /* __PLAT_PXA_GPIO_H */