| /* |
| * linux/arch/arm/common/it8152.c |
| * |
| * Copyright Compulab Ltd, 2002-2007 |
| * Mike Rapoport <mike@compulab.co.il> |
| * |
| * The DMA bouncing part is taken from arch/arm/mach-ixp4xx/common-pci.c |
| * (see this file for respective copyrights) |
| * |
| * Thanks to Guennadi Liakhovetski <gl@dsa-ac.de> for IRQ enumberation |
| * and demux code. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/sched.h> |
| #include <linux/kernel.h> |
| #include <linux/pci.h> |
| #include <linux/ptrace.h> |
| #include <linux/interrupt.h> |
| #include <linux/mm.h> |
| #include <linux/init.h> |
| #include <linux/ioport.h> |
| #include <linux/irq.h> |
| #include <linux/io.h> |
| |
| #include <asm/mach/pci.h> |
| #include <asm/hardware/it8152.h> |
| |
| #define MAX_SLOTS 21 |
| |
| static void it8152_mask_irq(unsigned int irq) |
| { |
| if (irq >= IT8152_LD_IRQ(0)) { |
| __raw_writel((__raw_readl(IT8152_INTC_LDCNIMR) | |
| (1 << (irq - IT8152_LD_IRQ(0)))), |
| IT8152_INTC_LDCNIMR); |
| } else if (irq >= IT8152_LP_IRQ(0)) { |
| __raw_writel((__raw_readl(IT8152_INTC_LPCNIMR) | |
| (1 << (irq - IT8152_LP_IRQ(0)))), |
| IT8152_INTC_LPCNIMR); |
| } else if (irq >= IT8152_PD_IRQ(0)) { |
| __raw_writel((__raw_readl(IT8152_INTC_PDCNIMR) | |
| (1 << (irq - IT8152_PD_IRQ(0)))), |
| IT8152_INTC_PDCNIMR); |
| } |
| } |
| |
| static void it8152_unmask_irq(unsigned int irq) |
| { |
| if (irq >= IT8152_LD_IRQ(0)) { |
| __raw_writel((__raw_readl(IT8152_INTC_LDCNIMR) & |
| ~(1 << (irq - IT8152_LD_IRQ(0)))), |
| IT8152_INTC_LDCNIMR); |
| } else if (irq >= IT8152_LP_IRQ(0)) { |
| __raw_writel((__raw_readl(IT8152_INTC_LPCNIMR) & |
| ~(1 << (irq - IT8152_LP_IRQ(0)))), |
| IT8152_INTC_LPCNIMR); |
| } else if (irq >= IT8152_PD_IRQ(0)) { |
| __raw_writel((__raw_readl(IT8152_INTC_PDCNIMR) & |
| ~(1 << (irq - IT8152_PD_IRQ(0)))), |
| IT8152_INTC_PDCNIMR); |
| } |
| } |
| |
| static struct irq_chip it8152_irq_chip = { |
| .name = "it8152", |
| .ack = it8152_mask_irq, |
| .mask = it8152_mask_irq, |
| .unmask = it8152_unmask_irq, |
| }; |
| |
| void it8152_init_irq(void) |
| { |
| int irq; |
| |
| __raw_writel((0xffff), IT8152_INTC_PDCNIMR); |
| __raw_writel((0), IT8152_INTC_PDCNIRR); |
| __raw_writel((0xffff), IT8152_INTC_LPCNIMR); |
| __raw_writel((0), IT8152_INTC_LPCNIRR); |
| __raw_writel((0xffff), IT8152_INTC_LDCNIMR); |
| __raw_writel((0), IT8152_INTC_LDCNIRR); |
| |
| for (irq = IT8152_IRQ(0); irq <= IT8152_LAST_IRQ; irq++) { |
| set_irq_chip(irq, &it8152_irq_chip); |
| set_irq_handler(irq, handle_level_irq); |
| set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); |
| } |
| } |
| |
| void it8152_irq_demux(unsigned int irq, struct irq_desc *desc) |
| { |
| int bits_pd, bits_lp, bits_ld; |
| int i; |
| |
| while (1) { |
| /* Read all */ |
| bits_pd = __raw_readl(IT8152_INTC_PDCNIRR); |
| bits_lp = __raw_readl(IT8152_INTC_LPCNIRR); |
| bits_ld = __raw_readl(IT8152_INTC_LDCNIRR); |
| |
| /* Ack */ |
| __raw_writel((~bits_pd), IT8152_INTC_PDCNIRR); |
| __raw_writel((~bits_lp), IT8152_INTC_LPCNIRR); |
| __raw_writel((~bits_ld), IT8152_INTC_LDCNIRR); |
| |
| if (!(bits_ld | bits_lp | bits_pd)) { |
| /* Re-read to guarantee, that there was a moment of |
| time, when they all three were 0. */ |
| bits_pd = __raw_readl(IT8152_INTC_PDCNIRR); |
| bits_lp = __raw_readl(IT8152_INTC_LPCNIRR); |
| bits_ld = __raw_readl(IT8152_INTC_LDCNIRR); |
| if (!(bits_ld | bits_lp | bits_pd)) |
| return; |
| } |
| |
| bits_pd &= ((1 << IT8152_PD_IRQ_COUNT) - 1); |
| while (bits_pd) { |
| i = __ffs(bits_pd); |
| generic_handle_irq(IT8152_PD_IRQ(i)); |
| bits_pd &= ~(1 << i); |
| } |
| |
| bits_lp &= ((1 << IT8152_LP_IRQ_COUNT) - 1); |
| while (bits_lp) { |
| i = __ffs(bits_lp); |
| generic_handle_irq(IT8152_LP_IRQ(i)); |
| bits_lp &= ~(1 << i); |
| } |
| |
| bits_ld &= ((1 << IT8152_LD_IRQ_COUNT) - 1); |
| while (bits_ld) { |
| i = __ffs(bits_ld); |
| generic_handle_irq(IT8152_LD_IRQ(i)); |
| bits_ld &= ~(1 << i); |
| } |
| } |
| } |
| |
| /* mapping for on-chip devices */ |
| int __init it8152_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) |
| { |
| if ((dev->vendor == PCI_VENDOR_ID_ITE) && |
| (dev->device == PCI_DEVICE_ID_ITE_8152)) { |
| if ((dev->class >> 8) == PCI_CLASS_MULTIMEDIA_AUDIO) |
| return IT8152_AUDIO_INT; |
| if ((dev->class >> 8) == PCI_CLASS_SERIAL_USB) |
| return IT8152_USB_INT; |
| if ((dev->class >> 8) == PCI_CLASS_SYSTEM_DMA) |
| return IT8152_CDMA_INT; |
| } |
| |
| return 0; |
| } |
| |
| static unsigned long it8152_pci_dev_base_address(struct pci_bus *bus, |
| unsigned int devfn) |
| { |
| unsigned long addr = 0; |
| |
| if (bus->number == 0) { |
| if (devfn < PCI_DEVFN(MAX_SLOTS, 0)) |
| addr = (devfn << 8); |
| } else |
| addr = (bus->number << 16) | (devfn << 8); |
| |
| return addr; |
| } |
| |
| static int it8152_pci_read_config(struct pci_bus *bus, |
| unsigned int devfn, int where, |
| int size, u32 *value) |
| { |
| unsigned long addr = it8152_pci_dev_base_address(bus, devfn); |
| u32 v; |
| int shift; |
| |
| shift = (where & 3); |
| |
| __raw_writel((addr + where), IT8152_PCI_CFG_ADDR); |
| v = (__raw_readl(IT8152_PCI_CFG_DATA) >> (8 * (shift))); |
| |
| *value = v; |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static int it8152_pci_write_config(struct pci_bus *bus, |
| unsigned int devfn, int where, |
| int size, u32 value) |
| { |
| unsigned long addr = it8152_pci_dev_base_address(bus, devfn); |
| u32 v, vtemp, mask = 0; |
| int shift; |
| |
| if (size == 1) |
| mask = 0xff; |
| if (size == 2) |
| mask = 0xffff; |
| |
| shift = (where & 3); |
| |
| __raw_writel((addr + where), IT8152_PCI_CFG_ADDR); |
| vtemp = __raw_readl(IT8152_PCI_CFG_DATA); |
| |
| if (mask) |
| vtemp &= ~(mask << (8 * shift)); |
| else |
| vtemp = 0; |
| |
| v = (value << (8 * shift)); |
| __raw_writel((addr + where), IT8152_PCI_CFG_ADDR); |
| __raw_writel((v | vtemp), IT8152_PCI_CFG_DATA); |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static struct pci_ops it8152_ops = { |
| .read = it8152_pci_read_config, |
| .write = it8152_pci_write_config, |
| }; |
| |
| static struct resource it8152_io = { |
| .name = "IT8152 PCI I/O region", |
| .flags = IORESOURCE_IO, |
| }; |
| |
| static struct resource it8152_mem = { |
| .name = "IT8152 PCI memory region", |
| .start = 0x10000000, |
| .end = 0x13e00000, |
| .flags = IORESOURCE_MEM, |
| }; |
| |
| /* |
| * The following functions are needed for DMA bouncing. |
| * ITE8152 chip can addrees up to 64MByte, so all the devices |
| * connected to ITE8152 (PCI and USB) should have limited DMA window |
| */ |
| |
| /* |
| * Setup DMA mask to 64MB on devices connected to ITE8152. Ignore all |
| * other devices. |
| */ |
| static int it8152_pci_platform_notify(struct device *dev) |
| { |
| if (dev->bus == &pci_bus_type) { |
| if (dev->dma_mask) |
| *dev->dma_mask = (SZ_64M - 1) | PHYS_OFFSET; |
| dev->coherent_dma_mask = (SZ_64M - 1) | PHYS_OFFSET; |
| dmabounce_register_dev(dev, 2048, 4096); |
| } |
| return 0; |
| } |
| |
| static int it8152_pci_platform_notify_remove(struct device *dev) |
| { |
| if (dev->bus == &pci_bus_type) |
| dmabounce_unregister_dev(dev); |
| |
| return 0; |
| } |
| |
| int __init it8152_pci_setup(int nr, struct pci_sys_data *sys) |
| { |
| it8152_io.start = IT8152_IO_BASE + 0x12000; |
| it8152_io.end = IT8152_IO_BASE + 0x12000 + 0x100000; |
| |
| sys->mem_offset = 0x10000000; |
| sys->io_offset = IT8152_IO_BASE; |
| |
| if (request_resource(&ioport_resource, &it8152_io)) { |
| printk(KERN_ERR "PCI: unable to allocate IO region\n"); |
| goto err0; |
| } |
| if (request_resource(&iomem_resource, &it8152_mem)) { |
| printk(KERN_ERR "PCI: unable to allocate memory region\n"); |
| goto err1; |
| } |
| |
| sys->resource[0] = &it8152_io; |
| sys->resource[1] = &it8152_mem; |
| |
| if (platform_notify || platform_notify_remove) { |
| printk(KERN_ERR "PCI: Can't use platform_notify\n"); |
| goto err2; |
| } |
| |
| platform_notify = it8152_pci_platform_notify; |
| platform_notify_remove = it8152_pci_platform_notify_remove; |
| |
| return 1; |
| |
| err2: |
| release_resource(&it8152_io); |
| err1: |
| release_resource(&it8152_mem); |
| err0: |
| return -EBUSY; |
| } |
| |
| /* |
| * If we set up a device for bus mastering, we need to check the latency |
| * timer as we don't have even crappy BIOSes to set it properly. |
| * The implementation is from arch/i386/pci/i386.c |
| */ |
| unsigned int pcibios_max_latency = 255; |
| |
| void pcibios_set_master(struct pci_dev *dev) |
| { |
| u8 lat; |
| |
| /* no need to update on-chip OHCI controller */ |
| if ((dev->vendor == PCI_VENDOR_ID_ITE) && |
| (dev->device == PCI_DEVICE_ID_ITE_8152) && |
| ((dev->class >> 8) == PCI_CLASS_SERIAL_USB)) |
| return; |
| |
| pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); |
| if (lat < 16) |
| lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency; |
| else if (lat > pcibios_max_latency) |
| lat = pcibios_max_latency; |
| else |
| return; |
| printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n", |
| pci_name(dev), lat); |
| pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); |
| } |
| |
| |
| struct pci_bus * __init it8152_pci_scan_bus(int nr, struct pci_sys_data *sys) |
| { |
| return pci_scan_bus(nr, &it8152_ops, sys); |
| } |
| |