Blackfin: move bf537-specific irq code out of common code
The SIC interrupt line muxing that the bf537 does is specific to this
CPU (thankfully), so rip it out of the common code and move it to a
bf537-specific file. This tidies up the common code significantly.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c
index 766e9f6..e32cd6f 100644
--- a/arch/blackfin/mach-common/ints-priority.c
+++ b/arch/blackfin/mach-common/ints-priority.c
@@ -24,24 +24,9 @@
#include <asm/gpio.h>
#include <asm/irq_handler.h>
#include <asm/dpmc.h>
-#include <asm/bfin5xx_spi.h>
-#include <asm/bfin_sport.h>
-#include <asm/bfin_can.h>
#define SIC_SYSIRQ(irq) (irq - (IRQ_CORETMR + 1))
-#ifdef BF537_FAMILY
-# define BF537_GENERIC_ERROR_INT_DEMUX
-# define SPI_ERR_MASK (BIT_STAT_TXCOL | BIT_STAT_RBSY | BIT_STAT_MODF | BIT_STAT_TXE) /* SPI_STAT */
-# define SPORT_ERR_MASK (ROVF | RUVF | TOVF | TUVF) /* SPORT_STAT */
-# define PPI_ERR_MASK (0xFFFF & ~FLD) /* PPI_STATUS */
-# define EMAC_ERR_MASK (PHYINT | MMCINT | RXFSINT | TXFSINT | WAKEDET | RXDMAERR | TXDMAERR | STMDONE) /* EMAC_SYSTAT */
-# define UART_ERR_MASK (0x6) /* UART_IIR */
-# define CAN_ERR_MASK (EWTIF | EWRIF | EPIF | BOIF | WUIF | UIAIF | AAIF | RMLIF | UCEIF | EXTIF | ADIF) /* CAN_GIF */
-#else
-# undef BF537_GENERIC_ERROR_INT_DEMUX
-#endif
-
/*
* NOTES:
* - we have separated the physical Hardware interrupt from the
@@ -119,7 +104,7 @@
* This is for core internal IRQs
*/
-static void bfin_ack_noop(struct irq_data *d)
+void bfin_ack_noop(struct irq_data *d)
{
/* Dummy function. */
}
@@ -148,7 +133,7 @@
return;
}
-static void bfin_internal_mask_irq(unsigned int irq)
+void bfin_internal_mask_irq(unsigned int irq)
{
unsigned long flags = hard_local_irq_save();
@@ -178,7 +163,7 @@
static void bfin_internal_unmask_irq_affinity(unsigned int irq,
const struct cpumask *affinity)
#else
-static void bfin_internal_unmask_irq(unsigned int irq)
+void bfin_internal_unmask_irq(unsigned int irq)
#endif
{
unsigned long flags = hard_local_irq_save();
@@ -310,7 +295,7 @@
.irq_set_wake = bfin_internal_set_wake_chip,
};
-static void bfin_handle_irq(unsigned irq)
+void bfin_handle_irq(unsigned irq)
{
#ifdef CONFIG_IPIPE
struct pt_regs regs; /* Contents not used. */
@@ -322,102 +307,6 @@
#endif /* !CONFIG_IPIPE */
}
-#ifdef BF537_GENERIC_ERROR_INT_DEMUX
-static int error_int_mask;
-
-static void bfin_generic_error_mask_irq(struct irq_data *d)
-{
- error_int_mask &= ~(1L << (d->irq - IRQ_PPI_ERROR));
- if (!error_int_mask)
- bfin_internal_mask_irq(IRQ_GENERIC_ERROR);
-}
-
-static void bfin_generic_error_unmask_irq(struct irq_data *d)
-{
- bfin_internal_unmask_irq(IRQ_GENERIC_ERROR);
- error_int_mask |= 1L << (d->irq - IRQ_PPI_ERROR);
-}
-
-static struct irq_chip bfin_generic_error_irqchip = {
- .name = "ERROR",
- .irq_ack = bfin_ack_noop,
- .irq_mask_ack = bfin_generic_error_mask_irq,
- .irq_mask = bfin_generic_error_mask_irq,
- .irq_unmask = bfin_generic_error_unmask_irq,
-};
-
-static void bfin_demux_error_irq(unsigned int int_err_irq,
- struct irq_desc *inta_desc)
-{
- int irq = 0;
-
-#if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
- if (bfin_read_EMAC_SYSTAT() & EMAC_ERR_MASK)
- irq = IRQ_MAC_ERROR;
- else
-#endif
- if (bfin_read_SPORT0_STAT() & SPORT_ERR_MASK)
- irq = IRQ_SPORT0_ERROR;
- else if (bfin_read_SPORT1_STAT() & SPORT_ERR_MASK)
- irq = IRQ_SPORT1_ERROR;
- else if (bfin_read_PPI_STATUS() & PPI_ERR_MASK)
- irq = IRQ_PPI_ERROR;
- else if (bfin_read_CAN_GIF() & CAN_ERR_MASK)
- irq = IRQ_CAN_ERROR;
- else if (bfin_read_SPI_STAT() & SPI_ERR_MASK)
- irq = IRQ_SPI_ERROR;
- else if ((bfin_read_UART0_IIR() & UART_ERR_MASK) == UART_ERR_MASK)
- irq = IRQ_UART0_ERROR;
- else if ((bfin_read_UART1_IIR() & UART_ERR_MASK) == UART_ERR_MASK)
- irq = IRQ_UART1_ERROR;
-
- if (irq) {
- if (error_int_mask & (1L << (irq - IRQ_PPI_ERROR)))
- bfin_handle_irq(irq);
- else {
-
- switch (irq) {
- case IRQ_PPI_ERROR:
- bfin_write_PPI_STATUS(PPI_ERR_MASK);
- break;
-#if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
- case IRQ_MAC_ERROR:
- bfin_write_EMAC_SYSTAT(EMAC_ERR_MASK);
- break;
-#endif
- case IRQ_SPORT0_ERROR:
- bfin_write_SPORT0_STAT(SPORT_ERR_MASK);
- break;
-
- case IRQ_SPORT1_ERROR:
- bfin_write_SPORT1_STAT(SPORT_ERR_MASK);
- break;
-
- case IRQ_CAN_ERROR:
- bfin_write_CAN_GIS(CAN_ERR_MASK);
- break;
-
- case IRQ_SPI_ERROR:
- bfin_write_SPI_STAT(SPI_ERR_MASK);
- break;
-
- default:
- break;
- }
-
- pr_debug("IRQ %d:"
- " MASKED PERIPHERAL ERROR INTERRUPT ASSERTED\n",
- irq);
- }
- } else
- printk(KERN_ERR
- "%s : %s : LINE %d :\nIRQ ?: PERIPHERAL ERROR"
- " INTERRUPT ASSERTED BUT NO SOURCE FOUND\n",
- __func__, __FILE__, __LINE__);
-
-}
-#endif /* BF537_GENERIC_ERROR_INT_DEMUX */
-
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
static int mac_stat_int_mask;
@@ -458,7 +347,7 @@
unsigned int irq = d->irq;
mac_stat_int_mask &= ~(1L << (irq - IRQ_MAC_PHYINT));
-#ifdef BF537_GENERIC_ERROR_INT_DEMUX
+#ifdef BF537_FAMILY
switch (irq) {
case IRQ_MAC_PHYINT:
bfin_write_EMAC_SYSCTL(bfin_read_EMAC_SYSCTL() & ~PHYIE);
@@ -477,7 +366,7 @@
{
unsigned int irq = d->irq;
-#ifdef BF537_GENERIC_ERROR_INT_DEMUX
+#ifdef BF537_FAMILY
switch (irq) {
case IRQ_MAC_PHYINT:
bfin_write_EMAC_SYSCTL(bfin_read_EMAC_SYSCTL() | PHYIE);
@@ -495,7 +384,7 @@
#ifdef CONFIG_PM
int bfin_mac_status_set_wake(struct irq_data *d, unsigned int state)
{
-#ifdef BF537_GENERIC_ERROR_INT_DEMUX
+#ifdef BF537_FAMILY
return bfin_internal_set_wake(IRQ_GENERIC_ERROR, state);
#else
return bfin_internal_set_wake(IRQ_MAC_ERROR, state);
@@ -514,8 +403,8 @@
.irq_set_wake = bfin_mac_status_set_wake,
};
-static void bfin_demux_mac_status_irq(unsigned int int_err_irq,
- struct irq_desc *inta_desc)
+void bfin_demux_mac_status_irq(unsigned int int_err_irq,
+ struct irq_desc *inta_desc)
{
int i, irq = 0;
u32 status = bfin_read_EMAC_SYSTAT();
@@ -1137,11 +1026,6 @@
local_irq_disable();
-#if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
- /* Clear EMAC Interrupt Status bits so we can demux it later */
- bfin_write_EMAC_SYSTAT(-1);
-#endif
-
#ifdef CONFIG_BF54x
# ifdef CONFIG_PINTx_REASSIGN
pint[0]->assign = CONFIG_PINT0_ASSIGN;
@@ -1183,11 +1067,6 @@
#endif
irq_set_chained_handler(irq, bfin_demux_gpio_irq);
break;
-#ifdef BF537_GENERIC_ERROR_INT_DEMUX
- case IRQ_GENERIC_ERROR:
- irq_set_chained_handler(irq, bfin_demux_error_irq);
- break;
-#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
case IRQ_MAC_ERROR:
irq_set_chained_handler(irq,
@@ -1227,14 +1106,7 @@
}
}
-#ifdef BF537_GENERIC_ERROR_INT_DEMUX
- for (irq = IRQ_PPI_ERROR; irq <= IRQ_UART1_ERROR; irq++)
- irq_set_chip_and_handler(irq, &bfin_generic_error_irqchip,
- handle_level_irq);
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
- irq_set_chained_handler(IRQ_MAC_ERROR, bfin_demux_mac_status_irq);
-#endif
-#endif
+ init_mach_irq();
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
for (irq = IRQ_MAC_PHYINT; irq <= IRQ_MAC_STMDONE; irq++)