cfg80211: keep track of supported interface modes
It is obviously good for userspace to know up front which
interface modes a given piece of hardware might support (even
if adding such an interface might fail later because of
concurrency issues), so let's make cfg80211 aware of that.
For good measure, disallow adding interfaces in all other
modes so drivers don't forget to announce support for one mode
when they add it.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Stephen Blackheath <tramp.enshrine.stephen@blacksapphire.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/adm8211.c b/drivers/net/wireless/adm8211.c
index 3333d45..c6a55cd 100644
--- a/drivers/net/wireless/adm8211.c
+++ b/drivers/net/wireless/adm8211.c
@@ -1884,6 +1884,7 @@
dev->extra_tx_headroom = sizeof(struct adm8211_tx_hdr);
/* dev->flags = IEEE80211_HW_RX_INCLUDES_FCS in promisc mode */
dev->flags = IEEE80211_HW_SIGNAL_UNSPEC;
+ dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
dev->channel_change_time = 1000;
dev->max_signal = 100; /* FIXME: find better value */
diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index 7989ab5..85260c3 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -485,6 +485,12 @@
hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_NOISE_DBM;
+
+ hw->wiphy->interface_modes =
+ BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_ADHOC) |
+ BIT(NL80211_IFTYPE_MESH_POINT);
+
hw->extra_tx_headroom = 2;
hw->channel_change_time = 5000;
sc = hw->priv;
diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c
index dc45eef..39a4a70 100644
--- a/drivers/net/wireless/ath9k/main.c
+++ b/drivers/net/wireless/ath9k/main.c
@@ -1482,6 +1482,11 @@
IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_NOISE_DBM;
+ hw->wiphy->interface_modes =
+ BIT(NL80211_IFTYPE_AP) |
+ BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_ADHOC);
+
SET_IEEE80211_DEV(hw, &pdev->dev);
pci_set_drvdata(pdev, hw);
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 63bafc2..2d915c1 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -4569,6 +4569,13 @@
IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_NOISE_DBM;
+ hw->wiphy->interface_modes =
+ BIT(NL80211_IFTYPE_AP) |
+ BIT(NL80211_IFTYPE_MESH_POINT) |
+ BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_WDS) |
+ BIT(NL80211_IFTYPE_ADHOC);
+
hw->queues = b43_modparam_qos ? 4 : 1;
SET_IEEE80211_DEV(hw, dev->dev);
if (is_valid_ether_addr(sprom->et1mac))
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index 1cb77db..68f63f5 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -3704,6 +3704,11 @@
hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_NOISE_DBM;
+ hw->wiphy->interface_modes =
+ BIT(NL80211_IFTYPE_AP) |
+ BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_WDS) |
+ BIT(NL80211_IFTYPE_ADHOC);
hw->queues = 1; /* FIXME: hardware has more queues */
SET_IEEE80211_DEV(hw, dev->dev);
if (is_valid_ether_addr(sprom->et1mac))
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index fbf75a6..0a511ef 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -819,6 +819,10 @@
/* Tell mac80211 our characteristics */
hw->flags = IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_NOISE_DBM;
+ hw->wiphy->interface_modes =
+ BIT(NL80211_IFTYPE_AP) |
+ BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_ADHOC);
/* Default value; 4 EDCA QOS priorities */
hw->queues = 4;
/* queues to support 11n aggregation */
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index a622fc3..cee3045 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -7888,6 +7888,11 @@
hw->flags = IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_NOISE_DBM;
+ hw->wiphy->interface_modes =
+ BIT(NL80211_IFTYPE_AP) |
+ BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_ADHOC);
+
/* 4 EDCA QOS priorities */
hw->queues = 4;
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 732429d..6ba50f0 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -447,6 +447,9 @@
hw->channel_change_time = 1;
hw->queues = 4;
+ hw->wiphy->interface_modes =
+ BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_AP);
hw->ampdu_queues = 1;
memcpy(data->channels, hwsim_channels, sizeof(hwsim_channels));
diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
index 17e06bb..6da98e6 100644
--- a/drivers/net/wireless/p54/p54common.c
+++ b/drivers/net/wireless/p54/p54common.c
@@ -1072,6 +1072,9 @@
dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | /* not sure */
IEEE80211_HW_RX_INCLUDES_FCS |
IEEE80211_HW_SIGNAL_UNSPEC;
+
+ dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
+
dev->channel_change_time = 1000; /* TODO: find actual value */
dev->max_signal = 127;
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 369b0b2..2f3bfc6 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -1052,6 +1052,11 @@
*/
rt2x00dev->hw->vif_data_size = sizeof(struct rt2x00_intf);
+ rt2x00dev->hw->wiphy->interface_modes =
+ BIT(NL80211_IFTYPE_AP) |
+ BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_ADHOC);
+
/*
* Let the driver probe the device to detect the capabilities.
*/
diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c
index 060a265..8a42bfa 100644
--- a/drivers/net/wireless/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl8187_dev.c
@@ -1184,6 +1184,8 @@
dev->max_signal = 65;
}
+ dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
+
if ((id->driver_info == DEVICE_RTL8187) && priv->is_rtl8187b)
printk(KERN_INFO "rtl8187: inconsistency between id with OEM"
" info!\n");
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index 4d7b98b..e019102 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -937,6 +937,11 @@
hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
IEEE80211_HW_SIGNAL_DB;
+ hw->wiphy->interface_modes =
+ BIT(NL80211_IFTYPE_MESH_POINT) |
+ BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_ADHOC);
+
hw->max_signal = 100;
hw->queues = 1;
hw->extra_tx_headroom = sizeof(struct zd_ctrlset);