diff --git a/include/asm-sparc/sbus_32.h b/include/asm-sparc/sbus_32.h
new file mode 100644
index 0000000..77b5d3a
--- /dev/null
+++ b/include/asm-sparc/sbus_32.h
@@ -0,0 +1,153 @@
+/*
+ * sbus.h:  Defines for the Sun SBus.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_SBUS_H
+#define _SPARC_SBUS_H
+
+#include <linux/dma-mapping.h>
+#include <linux/ioport.h>
+
+#include <asm/oplib.h>
+#include <asm/prom.h>
+#include <asm/of_device.h>
+#include <asm/scatterlist.h>
+
+/* We scan which devices are on the SBus using the PROM node device
+ * tree.  SBus devices are described in two different ways.  You can
+ * either get an absolute address at which to access the device, or
+ * you can get a SBus 'slot' number and an offset within that slot.
+ */
+
+/* The base address at which to calculate device OBIO addresses. */
+#define SUN_SBUS_BVADDR        0xf8000000
+#define SBUS_OFF_MASK          0x01ffffff
+
+/* These routines are used to calculate device address from slot
+ * numbers + offsets, and vice versa.
+ */
+
+static inline unsigned long sbus_devaddr(int slotnum, unsigned long offset)
+{
+  return (unsigned long) (SUN_SBUS_BVADDR+((slotnum)<<25)+(offset));
+}
+
+static inline int sbus_dev_slot(unsigned long dev_addr)
+{
+  return (int) (((dev_addr)-SUN_SBUS_BVADDR)>>25);
+}
+
+struct sbus_bus;
+
+/* Linux SBUS device tables */
+struct sbus_dev {
+	struct of_device	ofdev;
+	struct sbus_bus		*bus;
+	struct sbus_dev		*next;
+	struct sbus_dev		*child;
+	struct sbus_dev		*parent;
+	int prom_node;
+	char prom_name[64];
+	int slot;
+
+	struct resource resource[PROMREG_MAX];
+
+	struct linux_prom_registers reg_addrs[PROMREG_MAX];
+	int num_registers;
+
+	struct linux_prom_ranges device_ranges[PROMREG_MAX];
+	int num_device_ranges;
+
+	unsigned int irqs[4];
+	int num_irqs;
+};
+#define to_sbus_device(d) container_of(d, struct sbus_dev, ofdev.dev)
+
+/* This struct describes the SBus(s) found on this machine. */
+struct sbus_bus {
+	struct of_device	ofdev;
+	struct sbus_dev		*devices;	/* Link to devices on this SBus */
+	struct sbus_bus		*next;		/* next SBus, if more than one SBus */
+	int			prom_node;	/* PROM device tree node for this SBus */
+	char			prom_name[64];  /* Usually "sbus" or "sbi" */
+	int			clock_freq;
+
+	struct linux_prom_ranges sbus_ranges[PROMREG_MAX];
+	int num_sbus_ranges;
+
+	int devid;
+	int board;
+};
+#define to_sbus(d) container_of(d, struct sbus_bus, ofdev.dev)
+
+extern struct sbus_bus *sbus_root;
+
+static inline int
+sbus_is_slave(struct sbus_dev *dev)
+{
+	/* XXX Have to write this for sun4c's */
+	return 0;
+}
+
+/* Device probing routines could find these handy */
+#define for_each_sbus(bus) \
+        for((bus) = sbus_root; (bus); (bus)=(bus)->next)
+
+#define for_each_sbusdev(device, bus) \
+        for((device) = (bus)->devices; (device); (device)=(device)->next)
+
+#define for_all_sbusdev(device, bus) \
+	for ((bus) = sbus_root; (bus); (bus) = (bus)->next) \
+		for ((device) = (bus)->devices; (device); (device) = (device)->next)
+
+/* Driver DVMA interfaces. */
+#define sbus_can_dma_64bit(sdev)	(0) /* actually, sparc_cpu_model==sun4d */
+#define sbus_can_burst64(sdev)		(0) /* actually, sparc_cpu_model==sun4d */
+extern void sbus_set_sbus64(struct sbus_dev *, int);
+extern void sbus_fill_device_irq(struct sbus_dev *);
+
+/* These yield IOMMU mappings in consistent mode. */
+extern void *sbus_alloc_consistent(struct sbus_dev *, long, u32 *dma_addrp);
+extern void sbus_free_consistent(struct sbus_dev *, long, void *, u32);
+void prom_adjust_ranges(struct linux_prom_ranges *, int,
+			struct linux_prom_ranges *, int);
+
+#define SBUS_DMA_BIDIRECTIONAL	DMA_BIDIRECTIONAL
+#define SBUS_DMA_TODEVICE	DMA_TO_DEVICE
+#define SBUS_DMA_FROMDEVICE	DMA_FROM_DEVICE
+#define	SBUS_DMA_NONE		DMA_NONE
+
+/* All the rest use streaming mode mappings. */
+extern dma_addr_t sbus_map_single(struct sbus_dev *, void *, size_t, int);
+extern void sbus_unmap_single(struct sbus_dev *, dma_addr_t, size_t, int);
+extern int sbus_map_sg(struct sbus_dev *, struct scatterlist *, int, int);
+extern void sbus_unmap_sg(struct sbus_dev *, struct scatterlist *, int, int);
+
+/* Finally, allow explicit synchronization of streamable mappings. */
+extern void sbus_dma_sync_single_for_cpu(struct sbus_dev *, dma_addr_t, size_t, int);
+#define sbus_dma_sync_single sbus_dma_sync_single_for_cpu
+extern void sbus_dma_sync_single_for_device(struct sbus_dev *, dma_addr_t, size_t, int);
+extern void sbus_dma_sync_sg_for_cpu(struct sbus_dev *, struct scatterlist *, int, int);
+#define sbus_dma_sync_sg sbus_dma_sync_sg_for_cpu
+extern void sbus_dma_sync_sg_for_device(struct sbus_dev *, struct scatterlist *, int, int);
+
+/* Eric Brower (ebrower@usa.net)
+ * Translate SBus interrupt levels to ino values--
+ * this is used when converting sbus "interrupts" OBP
+ * node values to "intr" node values, and is platform
+ * dependent.  If only we could call OBP with
+ * "sbus-intr>cpu (sbint -- ino)" from kernel...
+ * See .../drivers/sbus/sbus.c for details.
+ */
+BTFIXUPDEF_CALL(unsigned int, sbint_to_irq, struct sbus_dev *sdev, unsigned int)
+#define sbint_to_irq(sdev, sbint) BTFIXUP_CALL(sbint_to_irq)(sdev, sbint)
+
+extern void sbus_arch_bus_ranges_init(struct device_node *, struct sbus_bus *);
+extern void sbus_setup_iommu(struct sbus_bus *, struct device_node *);
+extern void sbus_setup_arch_props(struct sbus_bus *, struct device_node *);
+extern int sbus_arch_preinit(void);
+extern void sbus_arch_postinit(void);
+
+#endif /* !(_SPARC_SBUS_H) */