sparc: join the remaining header files

With this commit all sparc64 header files are moved to asm-sparc.
The remaining files (71 files) were too different to be trivially
merged so divide them up in a _32.h and a _64.h file which
are both included from the file with no bit size.

The following script were used:
cd include
FILES=`wc -l asm-sparc64/*h | grep -v '^     1' | cut -b 20-`

for FILE in ${FILES}; do
  echo $FILE:
  BASE=`echo $FILE | cut -d '.' -f 1`
  FN32=${BASE}_32.h
  FN64=${BASE}_64.h
  GUARD=___ASM_SPARC_`echo $BASE | tr '-' '_' | tr [:lower:] [:upper:]`_H
  git mv asm-sparc/$FILE asm-sparc/$FN32
  git mv asm-sparc64/$FILE asm-sparc/$FN64
  echo git mv done
  printf "#ifndef %s\n" $GUARD                             >   asm-sparc/$FILE
  printf "#define %s\n" $GUARD                             >>  asm-sparc/$FILE
  printf "#if defined(__sparc__) && defined(__arch64__)\n" >>  asm-sparc/$FILE
  printf "#include <asm-sparc/%s>\n" $FN64                 >>  asm-sparc/$FILE
  printf "#else\n"                                         >>  asm-sparc/$FILE
  printf "#include <asm-sparc/%s>\n" $FN32                 >>  asm-sparc/$FILE
  printf "#endif\n"                                        >>  asm-sparc/$FILE
  printf "#endif\n"                                        >>  asm-sparc/$FILE
  git add asm-sparc/$FILE
  echo new file done
  printf "#include <asm-sparc/%s>\n" $FILE                 >  asm-sparc64/$FILE
  git add asm-sparc64/$FILE
  echo sparc64 file done
done

The guard contains three '_' to avoid conflict with existing guards.
In additing the two Kbuild files are emptied to avoid breaking
headers_* targets.
We will reintroduce the exported header files when the necessary
kbuild changes are merged.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/include/asm-sparc64/mostek.h b/include/asm-sparc64/mostek.h
index c5652de..95a752f 100644
--- a/include/asm-sparc64/mostek.h
+++ b/include/asm-sparc64/mostek.h
@@ -1,143 +1 @@
-/* mostek.h:  Describes the various Mostek time of day clock registers.
- *
- * Copyright (C) 1995 David S. Miller (davem@davemloft.net)
- * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
- */
-
-#ifndef _SPARC64_MOSTEK_H
-#define _SPARC64_MOSTEK_H
-
-#include <asm/idprom.h>
-
-/*       M48T02 Register Map (adapted from Sun NVRAM/Hostid FAQ)
- *
- *                             Data
- * Address                                                 Function
- *        Bit 7 Bit 6 Bit 5 Bit 4Bit 3 Bit 2 Bit 1 Bit 0
- *   7ff  -     -     -     -    -     -     -     -       Year 00-99
- *   7fe  0     0     0     -    -     -     -     -      Month 01-12
- *   7fd  0     0     -     -    -     -     -     -       Date 01-31
- *   7fc  0     FT    0     0    0     -     -     -        Day 01-07
- *   7fb  KS    0     -     -    -     -     -     -      Hours 00-23
- *   7fa  0     -     -     -    -     -     -     -    Minutes 00-59
- *   7f9  ST    -     -     -    -     -     -     -    Seconds 00-59
- *   7f8  W     R     S     -    -     -     -     -    Control
- *
- *   * ST is STOP BIT
- *   * W is WRITE BIT
- *   * R is READ BIT
- *   * S is SIGN BIT
- *   * FT is FREQ TEST BIT
- *   * KS is KICK START BIT
- */
-
-/* The Mostek 48t02 real time clock and NVRAM chip. The registers
- * other than the control register are in binary coded decimal. Some
- * control bits also live outside the control register.
- *
- * We now deal with physical addresses for I/O to the chip. -DaveM
- */
-static inline u8 mostek_read(void __iomem *addr)
-{
-	u8 ret;
-
-	__asm__ __volatile__("lduba	[%1] %2, %0"
-			     : "=r" (ret)
-			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
-	return ret;
-}
-
-static inline void mostek_write(void __iomem *addr, u8 val)
-{
-	__asm__ __volatile__("stba	%0, [%1] %2"
-			     : /* no outputs */
-			     : "r" (val), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
-}
-
-#define MOSTEK_EEPROM		0x0000UL
-#define MOSTEK_IDPROM		0x07d8UL
-#define MOSTEK_CREG		0x07f8UL
-#define MOSTEK_SEC		0x07f9UL
-#define MOSTEK_MIN		0x07faUL
-#define MOSTEK_HOUR		0x07fbUL
-#define MOSTEK_DOW		0x07fcUL
-#define MOSTEK_DOM		0x07fdUL
-#define MOSTEK_MONTH		0x07feUL
-#define MOSTEK_YEAR		0x07ffUL
-
-extern spinlock_t mostek_lock;
-extern void __iomem *mstk48t02_regs;
-
-/* Control register values. */
-#define	MSTK_CREG_WRITE	0x80	/* Must set this before placing values. */
-#define	MSTK_CREG_READ	0x40	/* Stop updates to allow a clean read. */
-#define	MSTK_CREG_SIGN	0x20	/* Slow/speed clock in calibration mode. */
-
-/* Control bits that live in the other registers. */
-#define	MSTK_STOP	0x80	/* Stop the clock oscillator. (sec) */
-#define	MSTK_KICK_START	0x80	/* Kick start the clock chip. (hour) */
-#define MSTK_FREQ_TEST	0x40	/* Frequency test mode. (day) */
-
-#define MSTK_YEAR_ZERO       1968   /* If year reg has zero, it is 1968. */
-#define MSTK_CVT_YEAR(yr)  ((yr) + MSTK_YEAR_ZERO)
-
-/* Masks that define how much space each value takes up. */
-#define	MSTK_SEC_MASK	0x7f
-#define	MSTK_MIN_MASK	0x7f
-#define	MSTK_HOUR_MASK	0x3f
-#define	MSTK_DOW_MASK	0x07
-#define	MSTK_DOM_MASK	0x3f
-#define	MSTK_MONTH_MASK	0x1f
-#define	MSTK_YEAR_MASK	0xffU
-
-/* Binary coded decimal conversion macros. */
-#define MSTK_REGVAL_TO_DECIMAL(x)  (((x) & 0x0F) + 0x0A * ((x) >> 0x04))
-#define MSTK_DECIMAL_TO_REGVAL(x)  ((((x) / 0x0A) << 0x04) + ((x) % 0x0A))
-
-/* Generic register set and get macros for internal use. */
-#define MSTK_GET(regs,name)	\
-	(MSTK_REGVAL_TO_DECIMAL(mostek_read(regs + MOSTEK_ ## name) & MSTK_ ## name ## _MASK))
-#define MSTK_SET(regs,name,value) \
-do {	u8 __val = mostek_read(regs + MOSTEK_ ## name); \
-	__val &= ~(MSTK_ ## name ## _MASK); \
-	__val |= (MSTK_DECIMAL_TO_REGVAL(value) & \
-		  (MSTK_ ## name ## _MASK)); \
-	mostek_write(regs + MOSTEK_ ## name, __val); \
-} while(0)
-
-/* Macros to make register access easier on our fingers. These give you
- * the decimal value of the register requested if applicable. You pass
- * the a pointer to a 'struct mostek48t02'.
- */
-#define	MSTK_REG_CREG(regs)	(mostek_read((regs) + MOSTEK_CREG))
-#define	MSTK_REG_SEC(regs)	MSTK_GET(regs,SEC)
-#define	MSTK_REG_MIN(regs)	MSTK_GET(regs,MIN)
-#define	MSTK_REG_HOUR(regs)	MSTK_GET(regs,HOUR)
-#define	MSTK_REG_DOW(regs)	MSTK_GET(regs,DOW)
-#define	MSTK_REG_DOM(regs)	MSTK_GET(regs,DOM)
-#define	MSTK_REG_MONTH(regs)	MSTK_GET(regs,MONTH)
-#define	MSTK_REG_YEAR(regs)	MSTK_GET(regs,YEAR)
-
-#define	MSTK_SET_REG_SEC(regs,value)	MSTK_SET(regs,SEC,value)
-#define	MSTK_SET_REG_MIN(regs,value)	MSTK_SET(regs,MIN,value)
-#define	MSTK_SET_REG_HOUR(regs,value)	MSTK_SET(regs,HOUR,value)
-#define	MSTK_SET_REG_DOW(regs,value)	MSTK_SET(regs,DOW,value)
-#define	MSTK_SET_REG_DOM(regs,value)	MSTK_SET(regs,DOM,value)
-#define	MSTK_SET_REG_MONTH(regs,value)	MSTK_SET(regs,MONTH,value)
-#define	MSTK_SET_REG_YEAR(regs,value)	MSTK_SET(regs,YEAR,value)
-
-
-/* The Mostek 48t08 clock chip. Found on Sun4m's I think. It has the
- * same (basically) layout of the 48t02 chip except for the extra
- * NVRAM on board (8 KB against the 48t02's 2 KB).
- */
-#define MOSTEK_48T08_OFFSET	0x0000UL	/* Lower NVRAM portions */
-#define MOSTEK_48T08_48T02	0x1800UL	/* Offset to 48T02 chip */
-
-/* SUN5 systems usually have 48t59 model clock chipsets.  But we keep the older
- * clock chip definitions around just in case.
- */
-#define MOSTEK_48T59_OFFSET	0x0000UL	/* Lower NVRAM portions */
-#define MOSTEK_48T59_48T02	0x1800UL	/* Offset to 48T02 chip */
-
-#endif /* !(_SPARC64_MOSTEK_H) */
+#include <asm-sparc/mostek.h>