RDMA/cxgb4/cxgb4vf/csiostor: Cleanup SGE register defines
This patch cleanups all SGE related macros/register defines that are
defined in t4_regs.h and the affected files.
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/scsi/csiostor/csio_hw.c b/drivers/scsi/csiostor/csio_hw.c
index 9ab997e..890d93a 100644
--- a/drivers/scsi/csiostor/csio_hw.c
+++ b/drivers/scsi/csiostor/csio_hw.c
@@ -2256,15 +2256,15 @@
pl &= (~SF);
csio_wr_reg32(hw, pl, PL_INT_ENABLE);
- csio_wr_reg32(hw, ERR_CPL_EXCEED_IQE_SIZE |
- EGRESS_SIZE_ERR | ERR_INVALID_CIDX_INC |
- ERR_CPL_OPCODE_0 | ERR_DROPPED_DB |
- ERR_DATA_CPL_ON_HIGH_QID1 |
- ERR_DATA_CPL_ON_HIGH_QID0 | ERR_BAD_DB_PIDX3 |
- ERR_BAD_DB_PIDX2 | ERR_BAD_DB_PIDX1 |
- ERR_BAD_DB_PIDX0 | ERR_ING_CTXT_PRIO |
- ERR_EGR_CTXT_PRIO | INGRESS_SIZE_ERR,
- SGE_INT_ENABLE3);
+ csio_wr_reg32(hw, ERR_CPL_EXCEED_IQE_SIZE_F |
+ EGRESS_SIZE_ERR_F | ERR_INVALID_CIDX_INC_F |
+ ERR_CPL_OPCODE_0_F | ERR_DROPPED_DB_F |
+ ERR_DATA_CPL_ON_HIGH_QID1_F |
+ ERR_DATA_CPL_ON_HIGH_QID0_F | ERR_BAD_DB_PIDX3_F |
+ ERR_BAD_DB_PIDX2_F | ERR_BAD_DB_PIDX1_F |
+ ERR_BAD_DB_PIDX0_F | ERR_ING_CTXT_PRIO_F |
+ ERR_EGR_CTXT_PRIO_F | INGRESS_SIZE_ERR_F,
+ SGE_INT_ENABLE3_A);
csio_set_reg_field(hw, PL_INT_MAP0, 0, 1 << pf);
}
@@ -2300,7 +2300,7 @@
void
csio_hw_fatal_err(struct csio_hw *hw)
{
- csio_set_reg_field(hw, SGE_CONTROL, GLOBALENABLE, 0);
+ csio_set_reg_field(hw, SGE_CONTROL_A, GLOBALENABLE_F, 0);
csio_hw_intr_disable(hw);
/* Do not reset HW, we may need FW state for debugging */
@@ -2698,44 +2698,44 @@
uint64_t v;
static struct intr_info sge_intr_info[] = {
- { ERR_CPL_EXCEED_IQE_SIZE,
+ { ERR_CPL_EXCEED_IQE_SIZE_F,
"SGE received CPL exceeding IQE size", -1, 1 },
- { ERR_INVALID_CIDX_INC,
+ { ERR_INVALID_CIDX_INC_F,
"SGE GTS CIDX increment too large", -1, 0 },
- { ERR_CPL_OPCODE_0, "SGE received 0-length CPL", -1, 0 },
- { ERR_DROPPED_DB, "SGE doorbell dropped", -1, 0 },
- { ERR_DATA_CPL_ON_HIGH_QID1 | ERR_DATA_CPL_ON_HIGH_QID0,
+ { ERR_CPL_OPCODE_0_F, "SGE received 0-length CPL", -1, 0 },
+ { ERR_DROPPED_DB_F, "SGE doorbell dropped", -1, 0 },
+ { ERR_DATA_CPL_ON_HIGH_QID1_F | ERR_DATA_CPL_ON_HIGH_QID0_F,
"SGE IQID > 1023 received CPL for FL", -1, 0 },
- { ERR_BAD_DB_PIDX3, "SGE DBP 3 pidx increment too large", -1,
+ { ERR_BAD_DB_PIDX3_F, "SGE DBP 3 pidx increment too large", -1,
0 },
- { ERR_BAD_DB_PIDX2, "SGE DBP 2 pidx increment too large", -1,
+ { ERR_BAD_DB_PIDX2_F, "SGE DBP 2 pidx increment too large", -1,
0 },
- { ERR_BAD_DB_PIDX1, "SGE DBP 1 pidx increment too large", -1,
+ { ERR_BAD_DB_PIDX1_F, "SGE DBP 1 pidx increment too large", -1,
0 },
- { ERR_BAD_DB_PIDX0, "SGE DBP 0 pidx increment too large", -1,
+ { ERR_BAD_DB_PIDX0_F, "SGE DBP 0 pidx increment too large", -1,
0 },
- { ERR_ING_CTXT_PRIO,
+ { ERR_ING_CTXT_PRIO_F,
"SGE too many priority ingress contexts", -1, 0 },
- { ERR_EGR_CTXT_PRIO,
+ { ERR_EGR_CTXT_PRIO_F,
"SGE too many priority egress contexts", -1, 0 },
- { INGRESS_SIZE_ERR, "SGE illegal ingress QID", -1, 0 },
- { EGRESS_SIZE_ERR, "SGE illegal egress QID", -1, 0 },
+ { INGRESS_SIZE_ERR_F, "SGE illegal ingress QID", -1, 0 },
+ { EGRESS_SIZE_ERR_F, "SGE illegal egress QID", -1, 0 },
{ 0, NULL, 0, 0 }
};
- v = (uint64_t)csio_rd_reg32(hw, SGE_INT_CAUSE1) |
- ((uint64_t)csio_rd_reg32(hw, SGE_INT_CAUSE2) << 32);
+ v = (uint64_t)csio_rd_reg32(hw, SGE_INT_CAUSE1_A) |
+ ((uint64_t)csio_rd_reg32(hw, SGE_INT_CAUSE2_A) << 32);
if (v) {
csio_fatal(hw, "SGE parity error (%#llx)\n",
(unsigned long long)v);
csio_wr_reg32(hw, (uint32_t)(v & 0xFFFFFFFF),
- SGE_INT_CAUSE1);
- csio_wr_reg32(hw, (uint32_t)(v >> 32), SGE_INT_CAUSE2);
+ SGE_INT_CAUSE1_A);
+ csio_wr_reg32(hw, (uint32_t)(v >> 32), SGE_INT_CAUSE2_A);
}
- v |= csio_handle_intr_status(hw, SGE_INT_CAUSE3, sge_intr_info);
+ v |= csio_handle_intr_status(hw, SGE_INT_CAUSE3_A, sge_intr_info);
- if (csio_handle_intr_status(hw, SGE_INT_CAUSE3, sge_intr_info) ||
+ if (csio_handle_intr_status(hw, SGE_INT_CAUSE3_A, sge_intr_info) ||
v != 0)
csio_hw_fatal_err(hw);
}