RDMA/cxgb4/cxgb4vf/csiostor: Cleanup SGE register defines
This patch cleanups all SGE related macros/register defines that are
defined in t4_regs.h and the affected files.
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/scsi/csiostor/csio_wr.c b/drivers/scsi/csiostor/csio_wr.c
index 773da14..221433f 100644
--- a/drivers/scsi/csiostor/csio_wr.c
+++ b/drivers/scsi/csiostor/csio_wr.c
@@ -51,12 +51,12 @@
static int csio_sge_timer_reg = 1;
#define CSIO_SET_FLBUF_SIZE(_hw, _reg, _val) \
- csio_wr_reg32((_hw), (_val), SGE_FL_BUFFER_SIZE##_reg)
+ csio_wr_reg32((_hw), (_val), SGE_FL_BUFFER_SIZE##_reg##_A)
static void
csio_get_flbuf_size(struct csio_hw *hw, struct csio_sge *sge, uint32_t reg)
{
- sge->sge_fl_buf_size[reg] = csio_rd_reg32(hw, SGE_FL_BUFFER_SIZE0 +
+ sge->sge_fl_buf_size[reg] = csio_rd_reg32(hw, SGE_FL_BUFFER_SIZE0_A +
reg * sizeof(uint32_t));
}
@@ -71,7 +71,7 @@
static inline uint32_t
csio_wr_qstat_pgsz(struct csio_hw *hw)
{
- return (hw->wrm.sge.sge_control & EGRSTATUSPAGESIZE(1)) ? 128 : 64;
+ return (hw->wrm.sge.sge_control & EGRSTATUSPAGESIZE_F) ? 128 : 64;
}
/* Ring freelist doorbell */
@@ -84,9 +84,9 @@
* 8 freelist buffer pointers (since each pointer is 8 bytes).
*/
if (flq->inc_idx >= 8) {
- csio_wr_reg32(hw, DBPRIO(1) | QID(flq->un.fl.flid) |
+ csio_wr_reg32(hw, DBPRIO_F | QID_V(flq->un.fl.flid) |
CSIO_HW_PIDX(hw, flq->inc_idx / 8),
- MYPF_REG(SGE_PF_KDOORBELL));
+ MYPF_REG(SGE_PF_KDOORBELL_A));
flq->inc_idx &= 7;
}
}
@@ -95,10 +95,10 @@
static void
csio_wr_sge_intr_enable(struct csio_hw *hw, uint16_t iqid)
{
- csio_wr_reg32(hw, CIDXINC(0) |
- INGRESSQID(iqid) |
- TIMERREG(X_TIMERREG_RESTART_COUNTER),
- MYPF_REG(SGE_PF_GTS));
+ csio_wr_reg32(hw, CIDXINC_V(0) |
+ INGRESSQID_V(iqid) |
+ TIMERREG_V(X_TIMERREG_RESTART_COUNTER),
+ MYPF_REG(SGE_PF_GTS_A));
}
/*
@@ -982,9 +982,9 @@
wmb();
/* Ring SGE Doorbell writing q->pidx into it */
- csio_wr_reg32(hw, DBPRIO(prio) | QID(q->un.eq.physeqid) |
+ csio_wr_reg32(hw, DBPRIO_V(prio) | QID_V(q->un.eq.physeqid) |
CSIO_HW_PIDX(hw, q->inc_idx),
- MYPF_REG(SGE_PF_KDOORBELL));
+ MYPF_REG(SGE_PF_KDOORBELL_A));
q->inc_idx = 0;
return 0;
@@ -1242,10 +1242,10 @@
restart:
/* Now inform SGE about our incremental index value */
- csio_wr_reg32(hw, CIDXINC(q->inc_idx) |
- INGRESSQID(q->un.iq.physiqid) |
- TIMERREG(csio_sge_timer_reg),
- MYPF_REG(SGE_PF_GTS));
+ csio_wr_reg32(hw, CIDXINC_V(q->inc_idx) |
+ INGRESSQID_V(q->un.iq.physiqid) |
+ TIMERREG_V(csio_sge_timer_reg),
+ MYPF_REG(SGE_PF_GTS_A));
q->stats.n_tot_rsps += q->inc_idx;
q->inc_idx = 0;
@@ -1310,22 +1310,23 @@
uint32_t ingpad = 0;
uint32_t stat_len = clsz > 64 ? 128 : 64;
- csio_wr_reg32(hw, HOSTPAGESIZEPF0(s_hps) | HOSTPAGESIZEPF1(s_hps) |
- HOSTPAGESIZEPF2(s_hps) | HOSTPAGESIZEPF3(s_hps) |
- HOSTPAGESIZEPF4(s_hps) | HOSTPAGESIZEPF5(s_hps) |
- HOSTPAGESIZEPF6(s_hps) | HOSTPAGESIZEPF7(s_hps),
- SGE_HOST_PAGE_SIZE);
+ csio_wr_reg32(hw, HOSTPAGESIZEPF0_V(s_hps) | HOSTPAGESIZEPF1_V(s_hps) |
+ HOSTPAGESIZEPF2_V(s_hps) | HOSTPAGESIZEPF3_V(s_hps) |
+ HOSTPAGESIZEPF4_V(s_hps) | HOSTPAGESIZEPF5_V(s_hps) |
+ HOSTPAGESIZEPF6_V(s_hps) | HOSTPAGESIZEPF7_V(s_hps),
+ SGE_HOST_PAGE_SIZE_A);
sge->csio_fl_align = clsz < 32 ? 32 : clsz;
ingpad = ilog2(sge->csio_fl_align) - 5;
- csio_set_reg_field(hw, SGE_CONTROL, INGPADBOUNDARY_MASK |
- EGRSTATUSPAGESIZE(1),
- INGPADBOUNDARY(ingpad) |
- EGRSTATUSPAGESIZE(stat_len != 64));
+ csio_set_reg_field(hw, SGE_CONTROL_A,
+ INGPADBOUNDARY_V(INGPADBOUNDARY_M) |
+ EGRSTATUSPAGESIZE_F,
+ INGPADBOUNDARY_V(ingpad) |
+ EGRSTATUSPAGESIZE_V(stat_len != 64));
/* FL BUFFER SIZE#0 is Page size i,e already aligned to cache line */
- csio_wr_reg32(hw, PAGE_SIZE, SGE_FL_BUFFER_SIZE0);
+ csio_wr_reg32(hw, PAGE_SIZE, SGE_FL_BUFFER_SIZE0_A);
/*
* If using hard params, the following will get set correctly
@@ -1333,20 +1334,21 @@
*/
if (hw->flags & CSIO_HWF_USING_SOFT_PARAMS) {
csio_wr_reg32(hw,
- (csio_rd_reg32(hw, SGE_FL_BUFFER_SIZE2) +
+ (csio_rd_reg32(hw, SGE_FL_BUFFER_SIZE2_A) +
sge->csio_fl_align - 1) & ~(sge->csio_fl_align - 1),
- SGE_FL_BUFFER_SIZE2);
+ SGE_FL_BUFFER_SIZE2_A);
csio_wr_reg32(hw,
- (csio_rd_reg32(hw, SGE_FL_BUFFER_SIZE3) +
+ (csio_rd_reg32(hw, SGE_FL_BUFFER_SIZE3_A) +
sge->csio_fl_align - 1) & ~(sge->csio_fl_align - 1),
- SGE_FL_BUFFER_SIZE3);
+ SGE_FL_BUFFER_SIZE3_A);
}
csio_wr_reg32(hw, HPZ0(PAGE_SHIFT - 12), ULP_RX_TDDP_PSZ);
/* default value of rx_dma_offset of the NIC driver */
- csio_set_reg_field(hw, SGE_CONTROL, PKTSHIFT_MASK,
- PKTSHIFT(CSIO_SGE_RX_DMA_OFFSET));
+ csio_set_reg_field(hw, SGE_CONTROL_A,
+ PKTSHIFT_V(PKTSHIFT_M),
+ PKTSHIFT_V(CSIO_SGE_RX_DMA_OFFSET));
csio_hw_tp_wr_bits_indirect(hw, TP_INGRESS_CONFIG,
CSUM_HAS_PSEUDO_HDR, 0);
@@ -1384,9 +1386,9 @@
u32 timer_value_0_and_1, timer_value_2_and_3, timer_value_4_and_5;
u32 ingress_rx_threshold;
- sge->sge_control = csio_rd_reg32(hw, SGE_CONTROL);
+ sge->sge_control = csio_rd_reg32(hw, SGE_CONTROL_A);
- ingpad = INGPADBOUNDARY_GET(sge->sge_control);
+ ingpad = INGPADBOUNDARY_G(sge->sge_control);
switch (ingpad) {
case X_INGPCIEBOUNDARY_32B:
@@ -1427,11 +1429,11 @@
sge->timer_val[5] = (uint16_t)csio_core_ticks_to_us(hw,
TIMERVALUE5_GET(timer_value_4_and_5));
- ingress_rx_threshold = csio_rd_reg32(hw, SGE_INGRESS_RX_THRESHOLD);
- sge->counter_val[0] = THRESHOLD_0_GET(ingress_rx_threshold);
- sge->counter_val[1] = THRESHOLD_1_GET(ingress_rx_threshold);
- sge->counter_val[2] = THRESHOLD_2_GET(ingress_rx_threshold);
- sge->counter_val[3] = THRESHOLD_3_GET(ingress_rx_threshold);
+ ingress_rx_threshold = csio_rd_reg32(hw, SGE_INGRESS_RX_THRESHOLD_A);
+ sge->counter_val[0] = THRESHOLD_0_G(ingress_rx_threshold);
+ sge->counter_val[1] = THRESHOLD_1_G(ingress_rx_threshold);
+ sge->counter_val[2] = THRESHOLD_2_G(ingress_rx_threshold);
+ sge->counter_val[3] = THRESHOLD_3_G(ingress_rx_threshold);
csio_init_intr_coalesce_parms(hw);
}
@@ -1454,9 +1456,9 @@
* Set up our basic SGE mode to deliver CPL messages to our Ingress
* Queue and Packet Date to the Free List.
*/
- csio_set_reg_field(hw, SGE_CONTROL, RXPKTCPLMODE(1), RXPKTCPLMODE(1));
+ csio_set_reg_field(hw, SGE_CONTROL_A, RXPKTCPLMODE_F, RXPKTCPLMODE_F);
- sge->sge_control = csio_rd_reg32(hw, SGE_CONTROL);
+ sge->sge_control = csio_rd_reg32(hw, SGE_CONTROL_A);
/* sge->csio_fl_align is set up by csio_wr_fixup_host_params(). */
@@ -1464,22 +1466,24 @@
* Set up to drop DOORBELL writes when the DOORBELL FIFO overflows
* and generate an interrupt when this occurs so we can recover.
*/
- csio_set_reg_field(hw, SGE_DBFIFO_STATUS,
- HP_INT_THRESH(HP_INT_THRESH_MASK) |
- CSIO_HW_LP_INT_THRESH(hw, CSIO_HW_M_LP_INT_THRESH(hw)),
- HP_INT_THRESH(CSIO_SGE_DBFIFO_INT_THRESH) |
- CSIO_HW_LP_INT_THRESH(hw, CSIO_SGE_DBFIFO_INT_THRESH));
+ csio_set_reg_field(hw, SGE_DBFIFO_STATUS_A,
+ HP_INT_THRESH_V(HP_INT_THRESH_M) |
+ CSIO_HW_LP_INT_THRESH(hw,
+ CSIO_HW_M_LP_INT_THRESH(hw)),
+ HP_INT_THRESH_V(CSIO_SGE_DBFIFO_INT_THRESH) |
+ CSIO_HW_LP_INT_THRESH(hw,
+ CSIO_SGE_DBFIFO_INT_THRESH));
- csio_set_reg_field(hw, SGE_DOORBELL_CONTROL, ENABLE_DROP,
- ENABLE_DROP);
+ csio_set_reg_field(hw, SGE_DOORBELL_CONTROL_A, ENABLE_DROP_F,
+ ENABLE_DROP_F);
/* SGE_FL_BUFFER_SIZE0 is set up by csio_wr_fixup_host_params(). */
CSIO_SET_FLBUF_SIZE(hw, 1, CSIO_SGE_FLBUF_SIZE1);
csio_wr_reg32(hw, (CSIO_SGE_FLBUF_SIZE2 + sge->csio_fl_align - 1)
- & ~(sge->csio_fl_align - 1), SGE_FL_BUFFER_SIZE2);
+ & ~(sge->csio_fl_align - 1), SGE_FL_BUFFER_SIZE2_A);
csio_wr_reg32(hw, (CSIO_SGE_FLBUF_SIZE3 + sge->csio_fl_align - 1)
- & ~(sge->csio_fl_align - 1), SGE_FL_BUFFER_SIZE3);
+ & ~(sge->csio_fl_align - 1), SGE_FL_BUFFER_SIZE3_A);
CSIO_SET_FLBUF_SIZE(hw, 4, CSIO_SGE_FLBUF_SIZE4);
CSIO_SET_FLBUF_SIZE(hw, 5, CSIO_SGE_FLBUF_SIZE5);
CSIO_SET_FLBUF_SIZE(hw, 6, CSIO_SGE_FLBUF_SIZE6);
@@ -1502,11 +1506,11 @@
sge->counter_val[2] = CSIO_SGE_INT_CNT_VAL_2;
sge->counter_val[3] = CSIO_SGE_INT_CNT_VAL_3;
- csio_wr_reg32(hw, THRESHOLD_0(sge->counter_val[0]) |
- THRESHOLD_1(sge->counter_val[1]) |
- THRESHOLD_2(sge->counter_val[2]) |
- THRESHOLD_3(sge->counter_val[3]),
- SGE_INGRESS_RX_THRESHOLD);
+ csio_wr_reg32(hw, THRESHOLD_0_V(sge->counter_val[0]) |
+ THRESHOLD_1_V(sge->counter_val[1]) |
+ THRESHOLD_2_V(sge->counter_val[2]) |
+ THRESHOLD_3_V(sge->counter_val[3]),
+ SGE_INGRESS_RX_THRESHOLD_A);
csio_wr_reg32(hw,
TIMERVALUE0(csio_us_to_core_ticks(hw, sge->timer_val[0])) |