rt2x00: Fix WMM Queue naming
The Queue names were incorrectly copied from the legacy drivers,
as a result the queue names were inversed to what was expected.
This renames the queues using this mapping:
QID_AC_BK -> QID_AC_VO (priority 0)
QID_AC_BE -> QID_AC_VI (priority 1)
QID_AC_VI -> QID_AC_BE (priority 2)
QID_AC_VO -> QID_AC_BK (priority 3)
Note that this was a naming problem only, which didn't affect
the assignment of frames to their respective queues.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 2fc6ca5..54ca49a 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -664,12 +664,12 @@
u32 reg;
switch (queue->qid) {
- case QID_AC_BE:
+ case QID_AC_VO:
rt2x00pci_register_read(rt2x00dev, TXCSR0, ®);
rt2x00_set_field32(®, TXCSR0_KICK_PRIO, 1);
rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
break;
- case QID_AC_BK:
+ case QID_AC_VI:
rt2x00pci_register_read(rt2x00dev, TXCSR0, ®);
rt2x00_set_field32(®, TXCSR0_KICK_TX, 1);
rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
@@ -690,8 +690,8 @@
u32 reg;
switch (queue->qid) {
- case QID_AC_BE:
- case QID_AC_BK:
+ case QID_AC_VO:
+ case QID_AC_VI:
case QID_ATIM:
rt2x00pci_register_read(rt2x00dev, TXCSR0, ®);
rt2x00_set_field32(®, TXCSR0_ABORT, 1);
@@ -1322,13 +1322,13 @@
* 4 - Priority ring transmit done interrupt.
*/
if (rt2x00_get_field32(reg, CSR7_TXDONE_PRIORING))
- rt2400pci_txdone(rt2x00dev, QID_AC_BE);
+ rt2400pci_txdone(rt2x00dev, QID_AC_VO);
/*
* 5 - Tx ring transmit done interrupt.
*/
if (rt2x00_get_field32(reg, CSR7_TXDONE_TXRING))
- rt2400pci_txdone(rt2x00dev, QID_AC_BK);
+ rt2400pci_txdone(rt2x00dev, QID_AC_VI);
/* Enable interrupts again. */
rt2x00dev->ops->lib->set_device_state(rt2x00dev,
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index d67f911..a9ff26a 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -754,12 +754,12 @@
u32 reg;
switch (queue->qid) {
- case QID_AC_BE:
+ case QID_AC_VO:
rt2x00pci_register_read(rt2x00dev, TXCSR0, ®);
rt2x00_set_field32(®, TXCSR0_KICK_PRIO, 1);
rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
break;
- case QID_AC_BK:
+ case QID_AC_VI:
rt2x00pci_register_read(rt2x00dev, TXCSR0, ®);
rt2x00_set_field32(®, TXCSR0_KICK_TX, 1);
rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
@@ -780,8 +780,8 @@
u32 reg;
switch (queue->qid) {
- case QID_AC_BE:
- case QID_AC_BK:
+ case QID_AC_VO:
+ case QID_AC_VI:
case QID_ATIM:
rt2x00pci_register_read(rt2x00dev, TXCSR0, ®);
rt2x00_set_field32(®, TXCSR0_ABORT, 1);
@@ -1455,13 +1455,13 @@
* 4 - Priority ring transmit done interrupt.
*/
if (rt2x00_get_field32(reg, CSR7_TXDONE_PRIORING))
- rt2500pci_txdone(rt2x00dev, QID_AC_BE);
+ rt2500pci_txdone(rt2x00dev, QID_AC_VO);
/*
* 5 - Tx ring transmit done interrupt.
*/
if (rt2x00_get_field32(reg, CSR7_TXDONE_TXRING))
- rt2500pci_txdone(rt2x00dev, QID_AC_BK);
+ rt2500pci_txdone(rt2x00dev, QID_AC_VI);
/* Enable interrupts again. */
rt2x00dev->ops->lib->set_device_state(rt2x00dev,
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index 9ea0961..4c55e85 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -213,10 +213,10 @@
/*
* WMM_AIFSN_CFG: Aifsn for each EDCA AC
- * AIFSN0: AC_BE
- * AIFSN1: AC_BK
- * AIFSN2: AC_VI
- * AIFSN3: AC_VO
+ * AIFSN0: AC_VO
+ * AIFSN1: AC_VI
+ * AIFSN2: AC_BE
+ * AIFSN3: AC_BK
*/
#define WMM_AIFSN_CFG 0x0214
#define WMM_AIFSN_CFG_AIFSN0 FIELD32(0x0000000f)
@@ -226,10 +226,10 @@
/*
* WMM_CWMIN_CSR: CWmin for each EDCA AC
- * CWMIN0: AC_BE
- * CWMIN1: AC_BK
- * CWMIN2: AC_VI
- * CWMIN3: AC_VO
+ * CWMIN0: AC_VO
+ * CWMIN1: AC_VI
+ * CWMIN2: AC_BE
+ * CWMIN3: AC_BK
*/
#define WMM_CWMIN_CFG 0x0218
#define WMM_CWMIN_CFG_CWMIN0 FIELD32(0x0000000f)
@@ -239,10 +239,10 @@
/*
* WMM_CWMAX_CSR: CWmax for each EDCA AC
- * CWMAX0: AC_BE
- * CWMAX1: AC_BK
- * CWMAX2: AC_VI
- * CWMAX3: AC_VO
+ * CWMAX0: AC_VO
+ * CWMAX1: AC_VI
+ * CWMAX2: AC_BE
+ * CWMAX3: AC_BK
*/
#define WMM_CWMAX_CFG 0x021c
#define WMM_CWMAX_CFG_CWMAX0 FIELD32(0x0000000f)
@@ -251,18 +251,18 @@
#define WMM_CWMAX_CFG_CWMAX3 FIELD32(0x0000f000)
/*
- * AC_TXOP0: AC_BK/AC_BE TXOP register
- * AC0TXOP: AC_BK in unit of 32us
- * AC1TXOP: AC_BE in unit of 32us
+ * AC_TXOP0: AC_VO/AC_VI TXOP register
+ * AC0TXOP: AC_VO in unit of 32us
+ * AC1TXOP: AC_VI in unit of 32us
*/
#define WMM_TXOP0_CFG 0x0220
#define WMM_TXOP0_CFG_AC0TXOP FIELD32(0x0000ffff)
#define WMM_TXOP0_CFG_AC1TXOP FIELD32(0xffff0000)
/*
- * AC_TXOP1: AC_VO/AC_VI TXOP register
- * AC2TXOP: AC_VI in unit of 32us
- * AC3TXOP: AC_VO in unit of 32us
+ * AC_TXOP1: AC_BE/AC_BK TXOP register
+ * AC2TXOP: AC_BE in unit of 32us
+ * AC3TXOP: AC_BK in unit of 32us
*/
#define WMM_TXOP1_CFG 0x0224
#define WMM_TXOP1_CFG_AC2TXOP FIELD32(0x0000ffff)
@@ -288,7 +288,7 @@
#define MCU_CMD_CFG 0x022c
/*
- * AC_BK register offsets
+ * AC_VO register offsets
*/
#define TX_BASE_PTR0 0x0230
#define TX_MAX_CNT0 0x0234
@@ -296,7 +296,7 @@
#define TX_DTX_IDX0 0x023c
/*
- * AC_BE register offsets
+ * AC_VI register offsets
*/
#define TX_BASE_PTR1 0x0240
#define TX_MAX_CNT1 0x0244
@@ -304,7 +304,7 @@
#define TX_DTX_IDX1 0x024c
/*
- * AC_VI register offsets
+ * AC_BE register offsets
*/
#define TX_BASE_PTR2 0x0250
#define TX_MAX_CNT2 0x0254
@@ -312,7 +312,7 @@
#define TX_DTX_IDX2 0x025c
/*
- * AC_VO register offsets
+ * AC_BK register offsets
*/
#define TX_BASE_PTR3 0x0260
#define TX_MAX_CNT3 0x0264
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 15eef72..baa1468 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -217,10 +217,10 @@
struct queue_entry *entry;
switch (queue->qid) {
+ case QID_AC_VO:
+ case QID_AC_VI:
case QID_AC_BE:
case QID_AC_BK:
- case QID_AC_VI:
- case QID_AC_VO:
entry = rt2x00queue_get_entry(queue, Q_INDEX);
rt2800_register_write(rt2x00dev, TX_CTX_IDX(queue->qid), entry->entry_idx);
break;
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 52cc92d..ca82b3a 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -746,10 +746,10 @@
return;
switch (queue->qid) {
+ case QID_AC_VO:
+ case QID_AC_VI:
case QID_AC_BE:
case QID_AC_BK:
- case QID_AC_VI:
- case QID_AC_VO:
/*
* For TX queues, we have to disable the queue
* inside mac80211.
@@ -770,10 +770,10 @@
return;
switch (queue->qid) {
+ case QID_AC_VO:
+ case QID_AC_VI:
case QID_AC_BE:
case QID_AC_BK:
- case QID_AC_VI:
- case QID_AC_VO:
/*
* For TX queues, we have to enable the queue
* inside mac80211.
@@ -834,10 +834,10 @@
unsigned int i;
bool started;
bool tx_queue =
- (queue->qid == QID_AC_BE) ||
- (queue->qid == QID_AC_BK) ||
+ (queue->qid == QID_AC_VO) ||
(queue->qid == QID_AC_VI) ||
- (queue->qid == QID_AC_VO);
+ (queue->qid == QID_AC_BE) ||
+ (queue->qid == QID_AC_BK);
mutex_lock(&queue->status_lock);
@@ -1141,7 +1141,7 @@
/*
* Initialize queue parameters.
* RX: qid = QID_RX
- * TX: qid = QID_AC_BE + index
+ * TX: qid = QID_AC_VO + index
* TX: cw_min: 2^5 = 32.
* TX: cw_max: 2^10 = 1024.
* BCN: qid = QID_BEACON
@@ -1149,7 +1149,7 @@
*/
rt2x00queue_init(rt2x00dev, rt2x00dev->rx, QID_RX);
- qid = QID_AC_BE;
+ qid = QID_AC_VO;
tx_queue_for_each(rt2x00dev, queue)
rt2x00queue_init(rt2x00dev, queue, qid++);
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h
index 4765934..fab8e26 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.h
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
@@ -45,10 +45,10 @@
/**
* enum data_queue_qid: Queue identification
*
+ * @QID_AC_VO: AC VO queue
+ * @QID_AC_VI: AC VI queue
* @QID_AC_BE: AC BE queue
* @QID_AC_BK: AC BK queue
- * @QID_AC_VI: AC VI queue
- * @QID_AC_VO: AC VO queue
* @QID_HCCA: HCCA queue
* @QID_MGMT: MGMT queue (prio queue)
* @QID_RX: RX queue
@@ -57,10 +57,10 @@
* @QID_ATIM: Atim queue (value unspeficied, don't send it to device)
*/
enum data_queue_qid {
- QID_AC_BE = 0,
- QID_AC_BK = 1,
- QID_AC_VI = 2,
- QID_AC_VO = 3,
+ QID_AC_VO = 0,
+ QID_AC_VI = 1,
+ QID_AC_BE = 2,
+ QID_AC_BK = 3,
QID_HCCA = 4,
QID_MGMT = 13,
QID_RX = 14,
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index 8a16b51..1a9937d 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -353,10 +353,10 @@
void rt2x00usb_kick_queue(struct data_queue *queue)
{
switch (queue->qid) {
+ case QID_AC_VO:
+ case QID_AC_VI:
case QID_AC_BE:
case QID_AC_BK:
- case QID_AC_VI:
- case QID_AC_VO:
if (!rt2x00queue_empty(queue))
rt2x00queue_for_each_entry(queue, Q_INDEX_DONE, Q_INDEX,
rt2x00usb_kick_tx_entry);
@@ -403,10 +403,10 @@
* Obtain the queue completion handler
*/
switch (queue->qid) {
+ case QID_AC_VO:
+ case QID_AC_VI:
case QID_AC_BE:
case QID_AC_BK:
- case QID_AC_VI:
- case QID_AC_VO:
completion = &queue->rt2x00dev->txdone_work;
break;
case QID_RX:
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 7156b78..9405b10 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -1171,22 +1171,22 @@
u32 reg;
switch (queue->qid) {
- case QID_AC_BE:
+ case QID_AC_VO:
rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, ®);
rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC0, 1);
rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg);
break;
- case QID_AC_BK:
+ case QID_AC_VI:
rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, ®);
rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC1, 1);
rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg);
break;
- case QID_AC_VI:
+ case QID_AC_BE:
rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, ®);
rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC2, 1);
rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg);
break;
- case QID_AC_VO:
+ case QID_AC_BK:
rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, ®);
rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC3, 1);
rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg);
@@ -1202,22 +1202,22 @@
u32 reg;
switch (queue->qid) {
- case QID_AC_BE:
+ case QID_AC_VO:
rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, ®);
rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC0, 1);
rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg);
break;
- case QID_AC_BK:
+ case QID_AC_VI:
rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, ®);
rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC1, 1);
rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg);
break;
- case QID_AC_VI:
+ case QID_AC_BE:
rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, ®);
rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC2, 1);
rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg);
break;
- case QID_AC_VO:
+ case QID_AC_BK:
rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, ®);
rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC3, 1);
rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg);
diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h
index afc803b..e3cd6db 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.h
+++ b/drivers/net/wireless/rt2x00/rt61pci.h
@@ -784,25 +784,25 @@
*/
/*
- * AC0_BASE_CSR: AC_BK base address.
+ * AC0_BASE_CSR: AC_VO base address.
*/
#define AC0_BASE_CSR 0x3400
#define AC0_BASE_CSR_RING_REGISTER FIELD32(0xffffffff)
/*
- * AC1_BASE_CSR: AC_BE base address.
+ * AC1_BASE_CSR: AC_VI base address.
*/
#define AC1_BASE_CSR 0x3404
#define AC1_BASE_CSR_RING_REGISTER FIELD32(0xffffffff)
/*
- * AC2_BASE_CSR: AC_VI base address.
+ * AC2_BASE_CSR: AC_BE base address.
*/
#define AC2_BASE_CSR 0x3408
#define AC2_BASE_CSR_RING_REGISTER FIELD32(0xffffffff)
/*
- * AC3_BASE_CSR: AC_VO base address.
+ * AC3_BASE_CSR: AC_BK base address.
*/
#define AC3_BASE_CSR 0x340c
#define AC3_BASE_CSR_RING_REGISTER FIELD32(0xffffffff)
@@ -814,7 +814,7 @@
#define MGMT_BASE_CSR_RING_REGISTER FIELD32(0xffffffff)
/*
- * TX_RING_CSR0: TX Ring size for AC_BK, AC_BE, AC_VI, AC_VO.
+ * TX_RING_CSR0: TX Ring size for AC_VO, AC_VI, AC_BE, AC_BK.
*/
#define TX_RING_CSR0 0x3418
#define TX_RING_CSR0_AC0_RING_SIZE FIELD32(0x000000ff)
@@ -833,10 +833,10 @@
/*
* AIFSN_CSR: AIFSN for each EDCA AC.
- * AIFSN0: For AC_BK.
- * AIFSN1: For AC_BE.
- * AIFSN2: For AC_VI.
- * AIFSN3: For AC_VO.
+ * AIFSN0: For AC_VO.
+ * AIFSN1: For AC_VI.
+ * AIFSN2: For AC_BE.
+ * AIFSN3: For AC_BK.
*/
#define AIFSN_CSR 0x3420
#define AIFSN_CSR_AIFSN0 FIELD32(0x0000000f)
@@ -846,10 +846,10 @@
/*
* CWMIN_CSR: CWmin for each EDCA AC.
- * CWMIN0: For AC_BK.
- * CWMIN1: For AC_BE.
- * CWMIN2: For AC_VI.
- * CWMIN3: For AC_VO.
+ * CWMIN0: For AC_VO.
+ * CWMIN1: For AC_VI.
+ * CWMIN2: For AC_BE.
+ * CWMIN3: For AC_BK.
*/
#define CWMIN_CSR 0x3424
#define CWMIN_CSR_CWMIN0 FIELD32(0x0000000f)
@@ -859,10 +859,10 @@
/*
* CWMAX_CSR: CWmax for each EDCA AC.
- * CWMAX0: For AC_BK.
- * CWMAX1: For AC_BE.
- * CWMAX2: For AC_VI.
- * CWMAX3: For AC_VO.
+ * CWMAX0: For AC_VO.
+ * CWMAX1: For AC_VI.
+ * CWMAX2: For AC_BE.
+ * CWMAX3: For AC_BK.
*/
#define CWMAX_CSR 0x3428
#define CWMAX_CSR_CWMAX0 FIELD32(0x0000000f)
@@ -883,14 +883,14 @@
/*
* TX_CNTL_CSR: KICK/Abort TX.
- * KICK_TX_AC0: For AC_BK.
- * KICK_TX_AC1: For AC_BE.
- * KICK_TX_AC2: For AC_VI.
- * KICK_TX_AC3: For AC_VO.
- * ABORT_TX_AC0: For AC_BK.
- * ABORT_TX_AC1: For AC_BE.
- * ABORT_TX_AC2: For AC_VI.
- * ABORT_TX_AC3: For AC_VO.
+ * KICK_TX_AC0: For AC_VO.
+ * KICK_TX_AC1: For AC_VI.
+ * KICK_TX_AC2: For AC_BE.
+ * KICK_TX_AC3: For AC_BK.
+ * ABORT_TX_AC0: For AC_VO.
+ * ABORT_TX_AC1: For AC_VI.
+ * ABORT_TX_AC2: For AC_BE.
+ * ABORT_TX_AC3: For AC_BK.
*/
#define TX_CNTL_CSR 0x3430
#define TX_CNTL_CSR_KICK_TX_AC0 FIELD32(0x00000001)
@@ -1010,18 +1010,18 @@
#define E2PROM_CSR_LOAD_STATUS FIELD32(0x00000040)
/*
- * AC_TXOP_CSR0: AC_BK/AC_BE TXOP register.
- * AC0_TX_OP: For AC_BK, in unit of 32us.
- * AC1_TX_OP: For AC_BE, in unit of 32us.
+ * AC_TXOP_CSR0: AC_VO/AC_VI TXOP register.
+ * AC0_TX_OP: For AC_VO, in unit of 32us.
+ * AC1_TX_OP: For AC_VI, in unit of 32us.
*/
#define AC_TXOP_CSR0 0x3474
#define AC_TXOP_CSR0_AC0_TX_OP FIELD32(0x0000ffff)
#define AC_TXOP_CSR0_AC1_TX_OP FIELD32(0xffff0000)
/*
- * AC_TXOP_CSR1: AC_VO/AC_VI TXOP register.
- * AC2_TX_OP: For AC_VI, in unit of 32us.
- * AC3_TX_OP: For AC_VO, in unit of 32us.
+ * AC_TXOP_CSR1: AC_BE/AC_BK TXOP register.
+ * AC2_TX_OP: For AC_BE, in unit of 32us.
+ * AC3_TX_OP: For AC_BK, in unit of 32us.
*/
#define AC_TXOP_CSR1 0x3478
#define AC_TXOP_CSR1_AC2_TX_OP FIELD32(0x0000ffff)
diff --git a/drivers/net/wireless/rt2x00/rt73usb.h b/drivers/net/wireless/rt2x00/rt73usb.h
index 1315ce5..9f6b470 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.h
+++ b/drivers/net/wireless/rt2x00/rt73usb.h
@@ -689,10 +689,10 @@
/*
* AIFSN_CSR: AIFSN for each EDCA AC.
- * AIFSN0: For AC_BK.
- * AIFSN1: For AC_BE.
- * AIFSN2: For AC_VI.
- * AIFSN3: For AC_VO.
+ * AIFSN0: For AC_VO.
+ * AIFSN1: For AC_VI.
+ * AIFSN2: For AC_BE.
+ * AIFSN3: For AC_BK.
*/
#define AIFSN_CSR 0x0400
#define AIFSN_CSR_AIFSN0 FIELD32(0x0000000f)
@@ -702,10 +702,10 @@
/*
* CWMIN_CSR: CWmin for each EDCA AC.
- * CWMIN0: For AC_BK.
- * CWMIN1: For AC_BE.
- * CWMIN2: For AC_VI.
- * CWMIN3: For AC_VO.
+ * CWMIN0: For AC_VO.
+ * CWMIN1: For AC_VI.
+ * CWMIN2: For AC_BE.
+ * CWMIN3: For AC_BK.
*/
#define CWMIN_CSR 0x0404
#define CWMIN_CSR_CWMIN0 FIELD32(0x0000000f)
@@ -715,10 +715,10 @@
/*
* CWMAX_CSR: CWmax for each EDCA AC.
- * CWMAX0: For AC_BK.
- * CWMAX1: For AC_BE.
- * CWMAX2: For AC_VI.
- * CWMAX3: For AC_VO.
+ * CWMAX0: For AC_VO.
+ * CWMAX1: For AC_VI.
+ * CWMAX2: For AC_BE.
+ * CWMAX3: For AC_BK.
*/
#define CWMAX_CSR 0x0408
#define CWMAX_CSR_CWMAX0 FIELD32(0x0000000f)
@@ -727,18 +727,18 @@
#define CWMAX_CSR_CWMAX3 FIELD32(0x0000f000)
/*
- * AC_TXOP_CSR0: AC_BK/AC_BE TXOP register.
- * AC0_TX_OP: For AC_BK, in unit of 32us.
- * AC1_TX_OP: For AC_BE, in unit of 32us.
+ * AC_TXOP_CSR0: AC_VO/AC_VI TXOP register.
+ * AC0_TX_OP: For AC_VO, in unit of 32us.
+ * AC1_TX_OP: For AC_VI, in unit of 32us.
*/
#define AC_TXOP_CSR0 0x040c
#define AC_TXOP_CSR0_AC0_TX_OP FIELD32(0x0000ffff)
#define AC_TXOP_CSR0_AC1_TX_OP FIELD32(0xffff0000)
/*
- * AC_TXOP_CSR1: AC_VO/AC_VI TXOP register.
- * AC2_TX_OP: For AC_VI, in unit of 32us.
- * AC3_TX_OP: For AC_VO, in unit of 32us.
+ * AC_TXOP_CSR1: AC_BE/AC_BK TXOP register.
+ * AC2_TX_OP: For AC_BE, in unit of 32us.
+ * AC3_TX_OP: For AC_BK, in unit of 32us.
*/
#define AC_TXOP_CSR1 0x0410
#define AC_TXOP_CSR1_AC2_TX_OP FIELD32(0x0000ffff)