Merge master.kernel.org:/home/rmk/linux-2.6-arm
diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c
index fc05555..0ee34ac 100644
--- a/arch/arm/mach-ixp2000/core.c
+++ b/arch/arm/mach-ixp2000/core.c
@@ -40,6 +40,8 @@
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
+#include <asm/arch/gpio.h>
+
static DEFINE_SPINLOCK(ixp2000_slowport_lock);
static unsigned long ixp2000_slowport_irq_flags;
@@ -179,7 +181,7 @@
/* clear timer 1 */
ixp2000_reg_write(IXP2000_T1_CLR, 1);
-
+
while ((next_jiffy_time - *missing_jiffy_timer_csr) > ticks_per_jiffy) {
timer_tick(regs);
next_jiffy_time -= ticks_per_jiffy;
@@ -238,35 +240,40 @@
/*************************************************************************
* GPIO helpers
*************************************************************************/
-static unsigned long GPIO_IRQ_rising_edge;
static unsigned long GPIO_IRQ_falling_edge;
+static unsigned long GPIO_IRQ_rising_edge;
static unsigned long GPIO_IRQ_level_low;
static unsigned long GPIO_IRQ_level_high;
-void gpio_line_config(int line, int style)
+static void update_gpio_int_csrs(void)
+{
+ ixp2000_reg_write(IXP2000_GPIO_FEDR, GPIO_IRQ_falling_edge);
+ ixp2000_reg_write(IXP2000_GPIO_REDR, GPIO_IRQ_rising_edge);
+ ixp2000_reg_write(IXP2000_GPIO_LSLR, GPIO_IRQ_level_low);
+ ixp2000_reg_write(IXP2000_GPIO_LSHR, GPIO_IRQ_level_high);
+}
+
+void gpio_line_config(int line, int direction)
{
unsigned long flags;
local_irq_save(flags);
+ if (direction == GPIO_OUT) {
+ irq_desc[line + IRQ_IXP2000_GPIO0].valid = 0;
- if(style == GPIO_OUT) {
/* if it's an output, it ain't an interrupt anymore */
- ixp2000_reg_write(IXP2000_GPIO_PDSR, (1 << line));
GPIO_IRQ_falling_edge &= ~(1 << line);
GPIO_IRQ_rising_edge &= ~(1 << line);
GPIO_IRQ_level_low &= ~(1 << line);
GPIO_IRQ_level_high &= ~(1 << line);
- ixp2000_reg_write(IXP2000_GPIO_FEDR, GPIO_IRQ_falling_edge);
- ixp2000_reg_write(IXP2000_GPIO_REDR, GPIO_IRQ_rising_edge);
- ixp2000_reg_write(IXP2000_GPIO_LSHR, GPIO_IRQ_level_high);
- ixp2000_reg_write(IXP2000_GPIO_LSLR, GPIO_IRQ_level_low);
- irq_desc[line+IRQ_IXP2000_GPIO0].valid = 0;
- } else if(style == GPIO_IN) {
- ixp2000_reg_write(IXP2000_GPIO_PDCR, (1 << line));
+ update_gpio_int_csrs();
+
+ ixp2000_reg_write(IXP2000_GPIO_PDSR, 1 << line);
+ } else if (direction == GPIO_IN) {
+ ixp2000_reg_write(IXP2000_GPIO_PDCR, 1 << line);
}
-
local_irq_restore(flags);
-}
+}
/*************************************************************************
@@ -285,9 +292,50 @@
}
}
+static int ixp2000_GPIO_irq_type(unsigned int irq, unsigned int type)
+{
+ int line = irq - IRQ_IXP2000_GPIO0;
+
+ /*
+ * First, configure this GPIO line as an input.
+ */
+ ixp2000_reg_write(IXP2000_GPIO_PDCR, 1 << line);
+
+ /*
+ * Then, set the proper trigger type.
+ */
+ if (type & IRQT_FALLING)
+ GPIO_IRQ_falling_edge |= 1 << line;
+ else
+ GPIO_IRQ_falling_edge &= ~(1 << line);
+ if (type & IRQT_RISING)
+ GPIO_IRQ_rising_edge |= 1 << line;
+ else
+ GPIO_IRQ_rising_edge &= ~(1 << line);
+ if (type & IRQT_LOW)
+ GPIO_IRQ_level_low |= 1 << line;
+ else
+ GPIO_IRQ_level_low &= ~(1 << line);
+ if (type & IRQT_HIGH)
+ GPIO_IRQ_level_high |= 1 << line;
+ else
+ GPIO_IRQ_level_high &= ~(1 << line);
+ update_gpio_int_csrs();
+
+ /*
+ * Finally, mark the corresponding IRQ as valid.
+ */
+ irq_desc[irq].valid = 1;
+
+ return 0;
+}
+
static void ixp2000_GPIO_irq_mask_ack(unsigned int irq)
{
ixp2000_reg_write(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0)));
+
+ ixp2000_reg_write(IXP2000_GPIO_EDSR, (1 << (irq - IRQ_IXP2000_GPIO0)));
+ ixp2000_reg_write(IXP2000_GPIO_LDSR, (1 << (irq - IRQ_IXP2000_GPIO0)));
ixp2000_reg_write(IXP2000_GPIO_INST, (1 << (irq - IRQ_IXP2000_GPIO0)));
}
@@ -302,6 +350,7 @@
}
static struct irqchip ixp2000_GPIO_irq_chip = {
+ .type = ixp2000_GPIO_irq_type,
.ack = ixp2000_GPIO_irq_mask_ack,
.mask = ixp2000_GPIO_irq_mask,
.unmask = ixp2000_GPIO_irq_unmask
@@ -338,7 +387,7 @@
static void ixp2000_irq_unmask(unsigned int irq)
{
- ixp2000_reg_write(IXP2000_IRQ_ENABLE_SET, (1 << irq));
+ ixp2000_reg_write(IXP2000_IRQ_ENABLE_SET, (1 << irq));
}
static struct irqchip ixp2000_irq_chip = {
@@ -375,16 +424,16 @@
* our mask/unmask code much simpler.
*/
for (irq = IRQ_IXP2000_SOFT_INT; irq <= IRQ_IXP2000_THDB3; irq++) {
- if((1 << irq) & IXP2000_VALID_IRQ_MASK) {
+ if ((1 << irq) & IXP2000_VALID_IRQ_MASK) {
set_irq_chip(irq, &ixp2000_irq_chip);
set_irq_handler(irq, do_level_IRQ);
set_irq_flags(irq, IRQF_VALID);
} else set_irq_flags(irq, 0);
}
-
+
/*
* GPIO IRQs are invalid until someone sets the interrupt mode
- * by calling gpio_line_set();
+ * by calling set_irq_type().
*/
for (irq = IRQ_IXP2000_GPIO0; irq <= IRQ_IXP2000_GPIO7; irq++) {
set_irq_chip(irq, &ixp2000_GPIO_irq_chip);
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 267ba02..f39e8408 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -141,7 +141,15 @@
.physical = IXP4XX_PCI_CFG_BASE_PHYS,
.length = IXP4XX_PCI_CFG_REGION_SIZE,
.type = MT_DEVICE
+ },
+#ifdef CONFIG_DEBUG_LL
+ { /* Debug UART mapping */
+ .virtual = IXP4XX_DEBUG_UART_BASE_VIRT,
+ .physical = IXP4XX_DEBUG_UART_BASE_PHYS,
+ .length = IXP4XX_DEBUG_UART_REGION_SIZE,
+ .type = MT_DEVICE
}
+#endif
};
void __init ixp4xx_map_io(void)
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 0aa73d4..e3d8510 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -132,8 +132,8 @@
* 100x 1 0 1 r/o no acc
* 10x0 1 0 1 r/o no acc
* 1011 0 0 1 r/w no acc
- * 110x 1 1 0 r/o r/o
- * 11x0 1 1 0 r/o r/o
+ * 110x 0 1 0 r/w r/o
+ * 11x0 0 1 0 r/w r/o
* 1111 0 1 1 r/w r/w
*/
ENTRY(cpu_v6_set_pte)
@@ -150,7 +150,7 @@
tst r1, #L_PTE_USER
orrne r2, r2, #AP1 | nG
tstne r2, #APX
- eorne r2, r2, #AP0
+ bicne r2, r2, #APX | AP0
tst r1, #L_PTE_YOUNG
biceq r2, r2, #APX | AP1 | AP0
diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c
index ec943ca..1956af3 100644
--- a/drivers/i2c/busses/i2c-ixp2000.c
+++ b/drivers/i2c/busses/i2c-ixp2000.c
@@ -33,7 +33,8 @@
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
-#include <asm/hardware.h> /* Pick up IXP42000-specific bits */
+#include <asm/hardware.h> /* Pick up IXP2000-specific bits */
+#include <asm/arch/gpio.h>
static inline int ixp2000_scl_pin(void *data)
{
diff --git a/include/asm-arm/arch-ixp2000/gpio.h b/include/asm-arm/arch-ixp2000/gpio.h
index 84634af..03cbbe1 100644
--- a/include/asm-arm/arch-ixp2000/gpio.h
+++ b/include/asm-arm/arch-ixp2000/gpio.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-ixp2000/ixp2000-gpio.h
+ * include/asm-arm/arch-ixp2000/gpio.h
*
* Copyright (C) 2002 Intel Corporation.
*
@@ -16,26 +16,18 @@
* Use this instead of directly setting the GPIO registers.
* GPIOs may also be used as GPIOs (e.g. for emulating i2c/smb)
*/
-#ifndef _ASM_ARCH_IXP2000_GPIO_H_
-#define _ASM_ARCH_IXP2000_GPIO_H_
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
#ifndef __ASSEMBLY__
-#define GPIO_OUT 0x0
-#define GPIO_IN 0x80
+
+#define GPIO_IN 0
+#define GPIO_OUT 1
#define IXP2000_GPIO_LOW 0
#define IXP2000_GPIO_HIGH 1
-#define GPIO_NO_EDGES 0
-#define GPIO_FALLING_EDGE 1
-#define GPIO_RISING_EDGE 2
-#define GPIO_BOTH_EDGES 3
-#define GPIO_LEVEL_LOW 4
-#define GPIO_LEVEL_HIGH 8
-
-extern void set_GPIO_IRQ_edge(int gpio_nr, int edge);
-extern void set_GPIO_IRQ_level(int gpio_nr, int level);
-extern void gpio_line_config(int line, int style);
+extern void gpio_line_config(int line, int direction);
static inline int gpio_line_get(int line)
{
@@ -45,11 +37,12 @@
static inline void gpio_line_set(int line, int value)
{
if (value == IXP2000_GPIO_HIGH) {
- ixp_reg_write(IXP2000_GPIO_POSR, BIT(line));
- } else if (value == IXP2000_GPIO_LOW)
- ixp_reg_write(IXP2000_GPIO_POCR, BIT(line));
+ ixp2000_reg_write(IXP2000_GPIO_POSR, 1 << line);
+ } else if (value == IXP2000_GPIO_LOW) {
+ ixp2000_reg_write(IXP2000_GPIO_POCR, 1 << line);
+ }
}
#endif /* !__ASSEMBLY__ */
-#endif /* ASM_ARCH_IXP2000_GPIO_H_ */
+#endif /* ASM_ARCH_IXP2000_GPIO_H_ */
diff --git a/include/asm-arm/arch-ixp2000/io.h b/include/asm-arm/arch-ixp2000/io.h
index 0834626..5e56b474 100644
--- a/include/asm-arm/arch-ixp2000/io.h
+++ b/include/asm-arm/arch-ixp2000/io.h
@@ -27,8 +27,8 @@
* since that isn't available on the A? revisions we just keep doing
* things manually.
*/
-#define alignb(addr) (void __iomem *)((unsigned long)addr ^ 3)
-#define alignw(addr) (void __iomem *)((unsigned long)addr ^ 2)
+#define alignb(addr) (void __iomem *)((unsigned long)(addr) ^ 3)
+#define alignw(addr) (void __iomem *)((unsigned long)(addr) ^ 2)
#define outb(v,p) __raw_writeb((v),alignb(___io(p)))
#define outw(v,p) __raw_writew((v),alignw(___io(p)))
@@ -48,6 +48,78 @@
#define insw(p,d,l) __raw_readsw(alignw(___io(p)),d,l)
#define insl(p,d,l) __raw_readsl(___io(p),d,l)
+#define __is_io_address(p) ((((unsigned long)(p)) & ~(IXP2000_PCI_IO_SIZE - 1)) == IXP2000_PCI_IO_VIRT_BASE)
+
+#define ioread8(p) \
+ ({ \
+ unsigned int __v; \
+ \
+ if (__is_io_address(p)) { \
+ __v = __raw_readb(alignb(p)); \
+ } else { \
+ __v = __raw_readb(p); \
+ } \
+ \
+ __v; \
+ }) \
+
+#define ioread16(p) \
+ ({ \
+ unsigned int __v; \
+ \
+ if (__is_io_address(p)) { \
+ __v = __raw_readw(alignw(p)); \
+ } else { \
+ __v = le16_to_cpu(__raw_readw(p)); \
+ } \
+ \
+ __v; \
+ })
+
+#define ioread32(p) \
+ ({ \
+ unsigned int __v; \
+ \
+ if (__is_io_address(p)) { \
+ __v = __raw_readl(p); \
+ } else { \
+ __v = le32_to_cpu(__raw_readl(p)); \
+ } \
+ \
+ __v; \
+ })
+
+#define iowrite8(v,p) \
+ ({ \
+ if (__is_io_address(p)) { \
+ __raw_writeb((v), alignb(p)); \
+ } else { \
+ __raw_writeb((v), p); \
+ } \
+ })
+
+#define iowrite16(v,p) \
+ ({ \
+ if (__is_io_address(p)) { \
+ __raw_writew((v), alignw(p)); \
+ } else { \
+ __raw_writew(cpu_to_le16(v), p); \
+ } \
+ })
+
+#define iowrite32(v,p) \
+ ({ \
+ if (__is_io_address(p)) { \
+ __raw_writel((v), p); \
+ } else { \
+ __raw_writel(cpu_to_le32(v), p); \
+ } \
+ })
+
+#define ioport_map(port, nr) ___io(port)
+
+#define ioport_unmap(addr)
+
#ifdef CONFIG_ARCH_IXDP2X01
/*
diff --git a/include/asm-arm/arch-ixp2000/platform.h b/include/asm-arm/arch-ixp2000/platform.h
index 901bba6..52ded51 100644
--- a/include/asm-arm/arch-ixp2000/platform.h
+++ b/include/asm-arm/arch-ixp2000/platform.h
@@ -138,30 +138,10 @@
unsigned long (*bank_setup)(unsigned long);
};
-/*
- * GPIO helper functions
- */
-#define GPIO_IN 0
-#define GPIO_OUT 1
-
-extern void gpio_line_config(int line, int style);
-
-static inline int gpio_line_get(int line)
-{
- return (((*IXP2000_GPIO_PLR) >> line) & 1);
-}
-
-static inline void gpio_line_set(int line, int value)
-{
- if (value)
- ixp2000_reg_write(IXP2000_GPIO_POSR, (1 << line));
- else
- ixp2000_reg_write(IXP2000_GPIO_POCR, (1 << line));
-}
-
struct ixp2000_i2c_pins {
unsigned long sda_pin;
unsigned long scl_pin;
};
+
#endif /* !__ASSEMBLY__ */
diff --git a/include/asm-arm/arch-ixp4xx/debug-macro.S b/include/asm-arm/arch-ixp4xx/debug-macro.S
index 4499ae8..45a6c6c 100644
--- a/include/asm-arm/arch-ixp4xx/debug-macro.S
+++ b/include/asm-arm/arch-ixp4xx/debug-macro.S
@@ -14,6 +14,7 @@
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0xc8000000
+ orrne \rx, \rx, #0x00b00000
movne \rx, #0xff000000
add \rx,\rx,#3 @ Uart regs are at off set of 3 if
@ byte writes used - Big Endian.
diff --git a/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h b/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
index 8eeb1db..004696a 100644
--- a/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
+++ b/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
@@ -69,6 +69,16 @@
#define IXP4XX_PERIPHERAL_BASE_VIRT (0xFFBF2000)
#define IXP4XX_PERIPHERAL_REGION_SIZE (0x0000C000)
+/*
+ * Debug UART
+ *
+ * This is basically a remap of UART1 into a region that is section
+ * aligned so that it * can be used with the low-level debug code.
+ */
+#define IXP4XX_DEBUG_UART_BASE_PHYS (0xC8000000)
+#define IXP4XX_DEBUG_UART_BASE_VIRT (0xffb00000)
+#define IXP4XX_DEBUG_UART_REGION_SIZE (0x00001000)
+
#define IXP4XX_EXP_CS0_OFFSET 0x00
#define IXP4XX_EXP_CS1_OFFSET 0x04
#define IXP4XX_EXP_CS2_OFFSET 0x08
diff --git a/include/asm-arm/io.h b/include/asm-arm/io.h
index 08a4630..cc4b5f5 100644
--- a/include/asm-arm/io.h
+++ b/include/asm-arm/io.h
@@ -275,6 +275,7 @@
/*
* io{read,write}{8,16,32} macros
*/
+#ifndef ioread8
#define ioread8(p) ({ unsigned int __v = __raw_readb(p); __v; })
#define ioread16(p) ({ unsigned int __v = le16_to_cpu(__raw_readw(p)); __v; })
#define ioread32(p) ({ unsigned int __v = le32_to_cpu(__raw_readl(p)); __v; })
@@ -293,6 +294,7 @@
extern void __iomem *ioport_map(unsigned long port, unsigned int nr);
extern void ioport_unmap(void __iomem *addr);
+#endif
struct pci_dev;