PCI: Fix whitespace, capitalization, and spelling errors
Fix whitespace, capitalization, and spelling errors. No functional change.
I know "busses" is not an error, but "buses" was more common, so I used it
consistently.
Signed-off-by: Marta Rybczynska <rybczynska@gmail.com> (pci_reset_bridge_secondary_bus())
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
diff --git a/drivers/pci/hotplug/ibmphp_res.c b/drivers/pci/hotplug/ibmphp_res.c
index e2dc289..a265acb2 100644
--- a/drivers/pci/hotplug/ibmphp_res.c
+++ b/drivers/pci/hotplug/ibmphp_res.c
@@ -72,7 +72,7 @@
static struct resource_node * __init alloc_resources (struct ebda_pci_rsrc * curr)
{
struct resource_node *rs;
-
+
if (!curr) {
err ("NULL passed to allocate\n");
return NULL;
@@ -128,7 +128,7 @@
}
newrange->start = curr->start_addr;
newrange->end = curr->end_addr;
-
+
if (first_bus || (!num_ranges))
newrange->rangeno = 1;
else {
@@ -162,7 +162,7 @@
newbus->rangePFMem = newrange;
if (first_bus)
newbus->noPFMemRanges = 1;
- else {
+ else {
debug ("1st PFMemory Primary on Bus %x [%x - %x]\n", newbus->busno, newrange->start, newrange->end);
++newbus->noPFMemRanges;
fix_resources (newbus);
@@ -190,7 +190,7 @@
* This is the Resource Management initialization function. It will go through
* the Resource list taken from EBDA and fill in this module's data structures
*
- * THIS IS NOT TAKING INTO CONSIDERATION IO RESTRICTIONS OF PRIMARY BUSES,
+ * THIS IS NOT TAKING INTO CONSIDERATION IO RESTRICTIONS OF PRIMARY BUSES,
* SINCE WE'RE GOING TO ASSUME FOR NOW WE DON'T HAVE THOSE ON OUR BUSES FOR NOW
*
* Input: ptr to the head of the resource list from EBDA
@@ -382,7 +382,7 @@
* pci devices' resources for the appropriate resource
*
* Input: type of the resource, range to add, current bus
- * Output: 0 or -1, bus and range ptrs
+ * Output: 0 or -1, bus and range ptrs
********************************************************************************/
static int add_bus_range (int type, struct range_node *range, struct bus_node *bus_cur)
{
@@ -466,7 +466,7 @@
switch (type) {
case MEM:
- if (bus_cur->firstMem)
+ if (bus_cur->firstMem)
res = bus_cur->firstMem;
break;
case PFMEM:
@@ -583,7 +583,7 @@
}
/*******************************************************************************
- * This routine adds a resource to the list of resources to the appropriate bus
+ * This routine adds a resource to the list of resources to the appropriate bus
* based on their resource type and sorted by their starting addresses. It assigns
* the ptrs to next and nextRange if needed.
*
@@ -605,11 +605,11 @@
err ("NULL passed to add\n");
return -ENODEV;
}
-
+
bus_cur = find_bus_wprev (res->busno, NULL, 0);
-
+
if (!bus_cur) {
- /* didn't find a bus, smth's wrong!!! */
+ /* didn't find a bus, something's wrong!!! */
debug ("no bus in the system, either pci_dev's wrong or allocation failed\n");
return -ENODEV;
}
@@ -648,7 +648,7 @@
if (!range_cur) {
switch (res->type) {
case IO:
- ++bus_cur->needIOUpdate;
+ ++bus_cur->needIOUpdate;
break;
case MEM:
++bus_cur->needMemUpdate;
@@ -659,13 +659,13 @@
}
res->rangeno = -1;
}
-
+
debug ("The range is %d\n", res->rangeno);
if (!res_start) {
/* no first{IO,Mem,Pfmem} on the bus, 1st IO/Mem/Pfmem resource ever */
switch (res->type) {
case IO:
- bus_cur->firstIO = res;
+ bus_cur->firstIO = res;
break;
case MEM:
bus_cur->firstMem = res;
@@ -673,7 +673,7 @@
case PFMEM:
bus_cur->firstPFMem = res;
break;
- }
+ }
res->next = NULL;
res->nextRange = NULL;
} else {
@@ -770,7 +770,7 @@
* This routine will remove the resource from the list of resources
*
* Input: io, mem, and/or pfmem resource to be deleted
- * Ouput: modified resource list
+ * Output: modified resource list
* 0 or error code
****************************************************************************/
int ibmphp_remove_resource (struct resource_node *res)
@@ -825,7 +825,7 @@
if (!res_cur) {
if (res->type == PFMEM) {
- /*
+ /*
* case where pfmem might be in the PFMemFromMem list
* so will also need to remove the corresponding mem
* entry
@@ -961,12 +961,12 @@
}
/*****************************************************************************
- * This routine will check to make sure the io/mem/pfmem->len that the device asked for
+ * This routine will check to make sure the io/mem/pfmem->len that the device asked for
* can fit w/i our list of available IO/MEM/PFMEM resources. If cannot, returns -EINVAL,
* otherwise, returns 0
*
* Input: resource
- * Ouput: the correct start and end address are inputted into the resource node,
+ * Output: the correct start and end address are inputted into the resource node,
* 0 or -EINVAL
*****************************************************************************/
int ibmphp_check_resource (struct resource_node *res, u8 bridge)
@@ -996,7 +996,7 @@
bus_cur = find_bus_wprev (res->busno, NULL, 0);
if (!bus_cur) {
- /* didn't find a bus, smth's wrong!!! */
+ /* didn't find a bus, something's wrong!!! */
debug ("no bus in the system, either pci_dev's wrong or allocation failed\n");
return -EINVAL;
}
@@ -1066,7 +1066,7 @@
break;
}
}
-
+
if (flag && len_cur == res->len) {
debug ("but we are not here, right?\n");
res->start = start_cur;
@@ -1118,10 +1118,10 @@
if (res_prev) {
if (res_prev->rangeno != res_cur->rangeno) {
/* 1st device on this range */
- if ((res_cur->start != range->start) &&
+ if ((res_cur->start != range->start) &&
((len_tmp = res_cur->start - 1 - range->start) >= res->len)) {
if ((len_tmp < len_cur) || (len_cur == 0)) {
- if ((range->start % tmp_divide) == 0) {
+ if ((range->start % tmp_divide) == 0) {
/* just perfect, starting address is divisible by length */
flag = 1;
len_cur = len_tmp;
@@ -1344,7 +1344,7 @@
* This routine is called from remove_card if the card contained PPB.
* It will remove all the resources on the bus as well as the bus itself
* Input: Bus
- * Ouput: 0, -ENODEV
+ * Output: 0, -ENODEV
********************************************************************************/
int ibmphp_remove_bus (struct bus_node *bus, u8 parent_busno)
{
@@ -1353,7 +1353,7 @@
struct bus_node *prev_bus;
int rc;
- prev_bus = find_bus_wprev (parent_busno, NULL, 0);
+ prev_bus = find_bus_wprev (parent_busno, NULL, 0);
if (!prev_bus) {
debug ("something terribly wrong. Cannot find parent bus to the one to remove\n");
@@ -1424,7 +1424,7 @@
}
/******************************************************************************
- * This routine deletes the ranges from a given bus, and the entries from the
+ * This routine deletes the ranges from a given bus, and the entries from the
* parent's bus in the resources
* Input: current bus, previous bus
* Output: 0, -EINVAL
@@ -1453,7 +1453,7 @@
if (bus_cur->noMemRanges) {
range_cur = bus_cur->rangeMem;
for (i = 0; i < bus_cur->noMemRanges; i++) {
- if (ibmphp_find_resource (bus_prev, range_cur->start, &res, MEM) < 0)
+ if (ibmphp_find_resource (bus_prev, range_cur->start, &res, MEM) < 0)
return -EINVAL;
ibmphp_remove_resource (res);
@@ -1467,7 +1467,7 @@
if (bus_cur->noPFMemRanges) {
range_cur = bus_cur->rangePFMem;
for (i = 0; i < bus_cur->noPFMemRanges; i++) {
- if (ibmphp_find_resource (bus_prev, range_cur->start, &res, PFMEM) < 0)
+ if (ibmphp_find_resource (bus_prev, range_cur->start, &res, PFMEM) < 0)
return -EINVAL;
ibmphp_remove_resource (res);
@@ -1482,7 +1482,7 @@
}
/*
- * find the resource node in the bus
+ * find the resource node in the bus
* Input: Resource needed, start address of the resource, type of resource
*/
int ibmphp_find_resource (struct bus_node *bus, u32 start_address, struct resource_node **res, int flag)
@@ -1512,7 +1512,7 @@
err ("wrong type of flag\n");
return -EINVAL;
}
-
+
while (res_cur) {
if (res_cur->start == start_address) {
*res = res_cur;
@@ -1718,7 +1718,7 @@
} /* end for pfmem */
} /* end if */
} /* end list_for_each bus */
- return 0;
+ return 0;
}
int ibmphp_add_pfmem_from_mem (struct resource_node *pfmem)
@@ -1760,9 +1760,9 @@
list_for_each (tmp, &gbuses) {
tmp_prev = tmp->prev;
bus_cur = list_entry (tmp, struct bus_node, bus_list);
- if (flag)
+ if (flag)
*prev = list_entry (tmp_prev, struct bus_node, bus_list);
- if (bus_cur->busno == bus_number)
+ if (bus_cur->busno == bus_number)
return bus_cur;
}
@@ -1776,7 +1776,7 @@
struct range_node *range;
struct resource_node *res;
struct list_head *tmp;
-
+
debug_pci ("*****************START**********************\n");
if ((!list_empty(&gbuses)) && flags) {
@@ -1906,7 +1906,7 @@
return 1;
range_cur = range_cur->next;
}
-
+
return 0;
}
@@ -1920,7 +1920,7 @@
* Returns: none
* Note: this function doesn't take into account IO restrictions etc,
* so will only work for bridges with no video/ISA devices behind them It
- * also will not work for onboard PPB's that can have more than 1 *bus
+ * also will not work for onboard PPBs that can have more than 1 *bus
* behind them All these are TO DO.
* Also need to add more error checkings... (from fnc returns etc)
*/
@@ -1963,7 +1963,7 @@
case PCI_HEADER_TYPE_BRIDGE:
function = 0x8;
case PCI_HEADER_TYPE_MULTIBRIDGE:
- /* We assume here that only 1 bus behind the bridge
+ /* We assume here that only 1 bus behind the bridge
TO DO: add functionality for several:
temp = secondary;
while (temp < subordinate) {
@@ -1972,7 +1972,7 @@
}
*/
pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_SECONDARY_BUS, &sec_busno);
- bus_sec = find_bus_wprev (sec_busno, NULL, 0);
+ bus_sec = find_bus_wprev (sec_busno, NULL, 0);
/* this bus structure doesn't exist yet, PPB was configured during previous loading of ibmphp */
if (!bus_sec) {
bus_sec = alloc_error_bus (NULL, sec_busno, 1);
@@ -2028,7 +2028,7 @@
io->len = io->end - io->start + 1;
ibmphp_add_resource (io);
}
- }
+ }
pci_bus_read_config_word (ibmphp_pci_bus, devfn, PCI_MEMORY_BASE, &start_mem_address);
pci_bus_read_config_word (ibmphp_pci_bus, devfn, PCI_MEMORY_LIMIT, &end_mem_address);