| SI476x Driver Readme |
| ------------------------------------------------ |
| Copyright (C) 2013 Andrey Smirnov <andrew.smirnov@gmail.com> |
| |
| TODO for the driver |
| ------------------------------ |
| |
| - According to the SiLabs' datasheet it is possible to update the |
| firmware of the radio chip in the run-time, thus bringing it to the |
| most recent version. Unfortunately I couldn't find any mentioning of |
| the said firmware update for the old chips that I tested the driver |
| against, so for chips like that the driver only exposes the old |
| functionality. |
| |
| |
| Parameters exposed over debugfs |
| ------------------------------- |
| SI476x allow user to get multiple characteristics that can be very |
| useful for EoL testing/RF performance estimation, parameters that have |
| very little to do with V4L2 subsystem. Such parameters are exposed via |
| debugfs and can be accessed via regular file I/O operations. |
| |
| The drivers exposes following files: |
| |
| * /sys/kernel/debug/<device-name>/acf |
| This file contains ACF(Automatically Controlled Features) status |
| information. The contents of the file is binary data of the |
| following layout: |
| |
| Offset | Name | Description |
| ==================================================================== |
| 0x00 | blend_int | Flag, set when stereo separation has |
| | | crossed below the blend threshold |
| -------------------------------------------------------------------- |
| 0x01 | hblend_int | Flag, set when HiBlend cutoff |
| | | frequency is lower than threshold |
| -------------------------------------------------------------------- |
| 0x02 | hicut_int | Flag, set when HiCut cutoff |
| | | frequency is lower than threshold |
| -------------------------------------------------------------------- |
| 0x03 | chbw_int | Flag, set when channel filter |
| | | bandwidth is less than threshold |
| -------------------------------------------------------------------- |
| 0x04 | softmute_int | Flag indicating that softmute |
| | | attenuation has increased above |
| | | softmute threshold |
| -------------------------------------------------------------------- |
| 0x05 | smute | 0 - Audio is not soft muted |
| | | 1 - Audio is soft muted |
| -------------------------------------------------------------------- |
| 0x06 | smattn | Soft mute attenuation level in dB |
| -------------------------------------------------------------------- |
| 0x07 | chbw | Channel filter bandwidth in kHz |
| -------------------------------------------------------------------- |
| 0x08 | hicut | HiCut cutoff frequency in units of |
| | | 100Hz |
| -------------------------------------------------------------------- |
| 0x09 | hiblend | HiBlend cutoff frequency in units |
| | | of 100 Hz |
| -------------------------------------------------------------------- |
| 0x10 | pilot | 0 - Stereo pilot is not present |
| | | 1 - Stereo pilot is present |
| -------------------------------------------------------------------- |
| 0x11 | stblend | Stereo blend in % |
| -------------------------------------------------------------------- |
| |
| |
| * /sys/kernel/debug/<device-name>/rds_blckcnt |
| This file contains statistics about RDS receptions. It's binary data |
| has the following layout: |
| |
| Offset | Name | Description |
| ==================================================================== |
| 0x00 | expected | Number of expected RDS blocks |
| -------------------------------------------------------------------- |
| 0x02 | received | Number of received RDS blocks |
| -------------------------------------------------------------------- |
| 0x04 | uncorrectable | Number of uncorrectable RDS blocks |
| -------------------------------------------------------------------- |
| |
| * /sys/kernel/debug/<device-name>/agc |
| This file contains information about parameters pertaining to |
| AGC(Automatic Gain Control) |
| |
| The layout is: |
| Offset | Name | Description |
| ==================================================================== |
| 0x00 | mxhi | 0 - FM Mixer PD high threshold is |
| | | not tripped |
| | | 1 - FM Mixer PD high threshold is |
| | | tripped |
| -------------------------------------------------------------------- |
| 0x01 | mxlo | ditto for FM Mixer PD low |
| -------------------------------------------------------------------- |
| 0x02 | lnahi | ditto for FM LNA PD high |
| -------------------------------------------------------------------- |
| 0x03 | lnalo | ditto for FM LNA PD low |
| -------------------------------------------------------------------- |
| 0x04 | fmagc1 | FMAGC1 attenuator resistance |
| | | (see datasheet for more detail) |
| -------------------------------------------------------------------- |
| 0x05 | fmagc2 | ditto for FMAGC2 |
| -------------------------------------------------------------------- |
| 0x06 | pgagain | PGA gain in dB |
| -------------------------------------------------------------------- |
| 0x07 | fmwblang | FM/WB LNA Gain in dB |
| -------------------------------------------------------------------- |
| |
| * /sys/kernel/debug/<device-name>/rsq |
| This file contains information about parameters pertaining to |
| RSQ(Received Signal Quality) |
| |
| The layout is: |
| Offset | Name | Description |
| ==================================================================== |
| 0x00 | multhint | 0 - multipath value has not crossed |
| | | the Multipath high threshold |
| | | 1 - multipath value has crossed |
| | | the Multipath high threshold |
| -------------------------------------------------------------------- |
| 0x01 | multlint | ditto for Multipath low threshold |
| -------------------------------------------------------------------- |
| 0x02 | snrhint | 0 - received signal's SNR has not |
| | | crossed high threshold |
| | | 1 - received signal's SNR has |
| | | crossed high threshold |
| -------------------------------------------------------------------- |
| 0x03 | snrlint | ditto for low threshold |
| -------------------------------------------------------------------- |
| 0x04 | rssihint | ditto for RSSI high threshold |
| -------------------------------------------------------------------- |
| 0x05 | rssilint | ditto for RSSI low threshold |
| -------------------------------------------------------------------- |
| 0x06 | bltf | Flag indicating if seek command |
| | | reached/wrapped seek band limit |
| -------------------------------------------------------------------- |
| 0x07 | snr_ready | Indicates that SNR metrics is ready |
| -------------------------------------------------------------------- |
| 0x08 | rssiready | ditto for RSSI metrics |
| -------------------------------------------------------------------- |
| 0x09 | injside | 0 - Low-side injection is being used |
| | | 1 - High-side injection is used |
| -------------------------------------------------------------------- |
| 0x10 | afcrl | Flag indicating if AFC rails |
| -------------------------------------------------------------------- |
| 0x11 | valid | Flag indicating if channel is valid |
| -------------------------------------------------------------------- |
| 0x12 | readfreq | Current tuned frequency |
| -------------------------------------------------------------------- |
| 0x14 | freqoff | Singed frequency offset in units of |
| | | 2ppm |
| -------------------------------------------------------------------- |
| 0x15 | rssi | Signed value of RSSI in dBuV |
| -------------------------------------------------------------------- |
| 0x16 | snr | Signed RF SNR in dB |
| -------------------------------------------------------------------- |
| 0x17 | issi | Signed Image Strength Signal |
| | | indicator |
| -------------------------------------------------------------------- |
| 0x18 | lassi | Signed Low side adjacent Channel |
| | | Strength indicator |
| -------------------------------------------------------------------- |
| 0x19 | hassi | ditto fpr High side |
| -------------------------------------------------------------------- |
| 0x20 | mult | Multipath indicator |
| -------------------------------------------------------------------- |
| 0x21 | dev | Frequency deviation |
| -------------------------------------------------------------------- |
| 0x24 | assi | Adjascent channel SSI |
| -------------------------------------------------------------------- |
| 0x25 | usn | Ultrasonic noise indicator |
| -------------------------------------------------------------------- |
| 0x26 | pilotdev | Pilot deviation in units of 100 Hz |
| -------------------------------------------------------------------- |
| 0x27 | rdsdev | ditto for RDS |
| -------------------------------------------------------------------- |
| 0x28 | assidev | ditto for ASSI |
| -------------------------------------------------------------------- |
| 0x29 | strongdev | Frequency deviation |
| -------------------------------------------------------------------- |
| 0x30 | rdspi | RDS PI code |
| -------------------------------------------------------------------- |
| |
| * /sys/kernel/debug/<device-name>/rsq_primary |
| This file contains information about parameters pertaining to |
| RSQ(Received Signal Quality) for primary tuner only. Layout is as |
| the one above. |