Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into devel-stable
Conflicts:
arch/arm/mach-at91/include/mach/system.h
arch/arm/mach-imx/mach-cpuimx27.c
AT91 conflict resolution:
Acked-by: Anders Larsen <al@alarsen.net>
IMX conflict resolution confirmed by Uwe Kleine-König.
diff --git a/Documentation/arm/00-INDEX b/Documentation/arm/00-INDEX
index 7f5fc3b..ecf7d04 100644
--- a/Documentation/arm/00-INDEX
+++ b/Documentation/arm/00-INDEX
@@ -6,6 +6,8 @@
- ARM Interrupt subsystem documentation
IXP2000
- Release Notes for Linux on Intel's IXP2000 Network Processor
+msm
+ - MSM specific documentation
Netwinder
- Netwinder specific documentation
Porting
diff --git a/Documentation/arm/msm/gpiomux.txt b/Documentation/arm/msm/gpiomux.txt
new file mode 100644
index 0000000..67a8162
--- /dev/null
+++ b/Documentation/arm/msm/gpiomux.txt
@@ -0,0 +1,176 @@
+This document provides an overview of the msm_gpiomux interface, which
+is used to provide gpio pin multiplexing and configuration on mach-msm
+targets.
+
+History
+=======
+
+The first-generation API for gpio configuration & multiplexing on msm
+is the function gpio_tlmm_config(). This function has a few notable
+shortcomings, which led to its deprecation and replacement by gpiomux:
+
+The 'disable' parameter: Setting the second parameter to
+gpio_tlmm_config to GPIO_CFG_DISABLE tells the peripheral
+processor in charge of the subsystem to perform a look-up into a
+low-power table and apply the low-power/sleep setting for the pin.
+As the msm family evolved this became problematic. Not all pins
+have sleep settings, not all peripheral processors will accept requests
+to apply said sleep settings, and not all msm targets have their gpio
+subsystems managed by a peripheral processor. In order to get consistent
+behavior on all targets, drivers are forced to ignore this parameter,
+rendering it useless.
+
+The 'direction' flag: for all mux-settings other than raw-gpio (0),
+the output-enable bit of a gpio is hard-wired to a known
+input (usually VDD or ground). For those settings, the direction flag
+is meaningless at best, and deceptive at worst. In addition, using the
+direction flag to change output-enable (OE) directly can cause trouble in
+gpiolib, which has no visibility into gpio direction changes made
+in this way. Direction control in gpio mode should be made through gpiolib.
+
+Key Features of gpiomux
+=======================
+
+- A consistent interface across all generations of msm. Drivers can expect
+the same results on every target.
+- gpiomux plays nicely with gpiolib. Functions that should belong to gpiolib
+are left to gpiolib and not duplicated here. gpiomux is written with the
+intent that gpio_chips will call gpiomux reference-counting methods
+from their request() and free() hooks, providing full integration.
+- Tabular configuration. Instead of having to call gpio_tlmm_config
+hundreds of times, gpio configuration is placed in a single table.
+- Per-gpio sleep. Each gpio is individually reference counted, allowing only
+those lines which are in use to be put in high-power states.
+- 0 means 'do nothing': all flags are designed so that the default memset-zero
+equates to a sensible default of 'no configuration', preventing users
+from having to provide hundreds of 'no-op' configs for unused or
+unwanted lines.
+
+Usage
+=====
+
+To use gpiomux, provide configuration information for relevant gpio lines
+in the msm_gpiomux_configs table. Since a 0 equates to "unconfigured",
+only those lines to be managed by gpiomux need to be specified. Here
+is a completely fictional example:
+
+struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
+ [12] = {
+ .active = GPIOMUX_VALID | GPIOMUX_DRV_8MA | GPIOMUX_FUNC_1,
+ .suspended = GPIOMUX_VALID | GPIOMUX_PULL_DOWN,
+ },
+ [34] = {
+ .suspended = GPIOMUX_VALID | GPIOMUX_PULL_DOWN,
+ },
+};
+
+To indicate that a gpio is in use, call msm_gpiomux_get() to increase
+its reference count. To decrease the reference count, call msm_gpiomux_put().
+
+The effect of this configuration is as follows:
+
+When the system boots, gpios 12 and 34 will be initialized with their
+'suspended' configurations. All other gpios, which were left unconfigured,
+will not be touched.
+
+When msm_gpiomux_get() is called on gpio 12 to raise its reference count
+above 0, its active configuration will be applied. Since no other gpio
+line has a valid active configuration, msm_gpiomux_get() will have no
+effect on any other line.
+
+When msm_gpiomux_put() is called on gpio 12 or 34 to drop their reference
+count to 0, their suspended configurations will be applied.
+Since no other gpio line has a valid suspended configuration, no other
+gpio line will be effected by msm_gpiomux_put(). Since gpio 34 has no valid
+active configuration, this is effectively a no-op for gpio 34 as well,
+with one small caveat, see the section "About Output-Enable Settings".
+
+All of the GPIOMUX_VALID flags may seem like unnecessary overhead, but
+they address some important issues. As unused entries (all those
+except 12 and 34) are zero-filled, gpiomux needs a way to distinguish
+the used fields from the unused. In addition, the all-zero pattern
+is a valid configuration! Therefore, gpiomux defines an additional bit
+which is used to indicate when a field is used. This has the pleasant
+side-effect of allowing calls to msm_gpiomux_write to use '0' to indicate
+that a value should not be changed:
+
+ msm_gpiomux_write(0, GPIOMUX_VALID, 0);
+
+replaces the active configuration of gpio 0 with an all-zero configuration,
+but leaves the suspended configuration as it was.
+
+Static Configurations
+=====================
+
+To install a static configuration, which is applied at boot and does
+not change after that, install a configuration with a suspended component
+but no active component, as in the previous example:
+
+ [34] = {
+ .suspended = GPIOMUX_VALID | GPIOMUX_PULL_DOWN,
+ },
+
+The suspended setting is applied during boot, and the lack of any valid
+active setting prevents any other setting from being applied at runtime.
+If other subsystems attempting to access the line is a concern, one could
+*really* anchor the configuration down by calling msm_gpiomux_get on the
+line at initialization to move the line into active mode. With the line
+held, it will never be re-suspended, and with no valid active configuration,
+no new configurations will be applied.
+
+But then, if having other subsystems grabbing for the line is truly a concern,
+it should be reserved with gpio_request instead, which carries an implicit
+msm_gpiomux_get.
+
+gpiomux and gpiolib
+===================
+
+It is expected that msm gpio_chips will call msm_gpiomux_get() and
+msm_gpiomux_put() from their request and free hooks, like this fictional
+example:
+
+static int request(struct gpio_chip *chip, unsigned offset)
+{
+ return msm_gpiomux_get(chip->base + offset);
+}
+
+static void free(struct gpio_chip *chip, unsigned offset)
+{
+ msm_gpiomux_put(chip->base + offset);
+}
+
+ ...somewhere in a gpio_chip declaration...
+ .request = request,
+ .free = free,
+
+This provides important functionality:
+- It guarantees that a gpio line will have its 'active' config applied
+ when the line is requested, and will not be suspended while the line
+ remains requested; and
+- It guarantees that gpio-direction settings from gpiolib behave sensibly.
+ See "About Output-Enable Settings."
+
+This mechanism allows for "auto-request" of gpiomux lines via gpiolib
+when it is suitable. Drivers wishing more exact control are, of course,
+free to also use msm_gpiomux_set and msm_gpiomux_get.
+
+About Output-Enable Settings
+============================
+
+Some msm targets do not have the ability to query the current gpio
+configuration setting. This means that changes made to the output-enable
+(OE) bit by gpiolib cannot be consistently detected and preserved by gpiomux.
+Therefore, when gpiomux applies a configuration setting, any direction
+settings which may have been applied by gpiolib are lost and the default
+input settings are re-applied.
+
+For this reason, drivers should not assume that gpio direction settings
+continue to hold if they free and then re-request a gpio. This seems like
+common sense - after all, anybody could have obtained the line in the
+meantime - but it needs saying.
+
+This also means that calls to msm_gpiomux_write will reset the OE bit,
+which means that if the gpio line is held by a client of gpiolib and
+msm_gpiomux_write is called, the direction setting has been lost and
+gpiolib's internal state has been broken.
+Release gpio lines before reconfiguring them.
diff --git a/MAINTAINERS b/MAINTAINERS
index 7679bf3..8395f2e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -990,11 +990,23 @@
F: arch/arm/mach-shmobile/
F: drivers/sh/
+ARM/TELECHIPS ARM ARCHITECTURE
+M: "Hans J. Koch" <hjk@linutronix.de>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: arch/arm/plat-tcc/
+F: arch/arm/mach-tcc8k/
+
ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
+ARM/TETON BGA MACHINE SUPPORT
+M: Mark F. Brown <mark.brown314@gmail.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+
ARM/THECUS N2100 MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e4b74fb..b27f8ab 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -510,6 +510,7 @@
select GENERIC_CLOCKEVENTS
select TICK_ONESHOT
select PLAT_PXA
+ select SPARSE_IRQ
help
Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
@@ -587,6 +588,7 @@
select GENERIC_CLOCKEVENTS
select TICK_ONESHOT
select PLAT_PXA
+ select SPARSE_IRQ
help
Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
@@ -748,6 +750,15 @@
Support for the StrongARM based Digital DNARD machine, also known
as "Shark" (<http://www.shark-linux.de/shark.html>).
+config ARCH_TCC_926
+ bool "Telechips TCC ARM926-based systems"
+ select CPU_ARM926T
+ select HAVE_CLK
+ select COMMON_CLKDEV
+ select GENERIC_CLOCKEVENTS
+ help
+ Support for Telechips TCC ARM926-based systems.
+
config ARCH_LH7A40X
bool "Sharp LH7A40X"
select CPU_ARM922T
@@ -916,6 +927,8 @@
source "arch/arm/plat-spear/Kconfig"
+source "arch/arm/plat-tcc/Kconfig"
+
if ARCH_S3C2410
source "arch/arm/mach-s3c2400/Kconfig"
source "arch/arm/mach-s3c2410/Kconfig"
@@ -1478,6 +1491,20 @@
However, if the CPU data cache is using a write-allocate mode,
this option is unlikely to provide any performance gain.
+config SECCOMP
+ bool
+ prompt "Enable seccomp to safely compute untrusted bytecode"
+ ---help---
+ This kernel feature is useful for number crunching applications
+ that may need to compute untrusted bytecode during their
+ execution. By using pipes or other transports made available to
+ the process as file descriptors supporting the read/write
+ syscalls, it's possible to isolate those applications in
+ their own address space using seccomp. Once seccomp is
+ enabled via prctl(PR_SET_SECCOMP), it cannot be disabled
+ and the task is only allowed to execute a few safe syscalls
+ defined by each seccomp mode.
+
config CC_STACKPROTECTOR
bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)"
help
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 91344af..c29fb38 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -2,6 +2,20 @@
source "lib/Kconfig.debug"
+config STRICT_DEVMEM
+ bool "Filter access to /dev/mem"
+ depends on MMU
+ ---help---
+ If this option is disabled, you allow userspace (root) access to all
+ of memory, including kernel and userspace memory. Accidental
+ access to this is obviously disastrous, but specific access can
+ be used by people debugging the kernel.
+
+ If this option is switched on, the /dev/mem file only allows
+ userspace access to memory mapped peripherals.
+
+ If in doubt, say Y.
+
# RMK wants arm kernels compiled with frame pointers or stack unwinding.
# If you know what you are doing and are willing to live without stack
# traces, you can get a slightly smaller kernel by setting this option to
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 8420f21..b87aed0 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -183,6 +183,7 @@
machine-$(CONFIG_ARCH_SHMOBILE) := shmobile
machine-$(CONFIG_ARCH_STMP378X) := stmp378x
machine-$(CONFIG_ARCH_STMP37XX) := stmp37xx
+machine-$(CONFIG_ARCH_TCC8K) := tcc8k
machine-$(CONFIG_ARCH_TEGRA) := tegra
machine-$(CONFIG_ARCH_U300) := u300
machine-$(CONFIG_ARCH_U8500) := ux500
@@ -202,6 +203,7 @@
plat-$(CONFIG_ARCH_OMAP) := omap
plat-$(CONFIG_ARCH_S3C64XX) := samsung
plat-$(CONFIG_ARCH_STMP3XXX) := stmp3xxx
+plat-$(CONFIG_ARCH_TCC_926) := tcc
plat-$(CONFIG_PLAT_IOP) := iop
plat-$(CONFIG_PLAT_NOMADIK) := nomadik
plat-$(CONFIG_PLAT_ORION) := orion
@@ -245,13 +247,14 @@
FASTFPE_OBJ :=$(FASTFPE)/
endif
-# If we have a machine-specific directory, then include it in the build.
-core-y += arch/arm/kernel/ arch/arm/mm/ arch/arm/common/
-core-y += $(machdirs) $(platdirs)
core-$(CONFIG_FPE_NWFPE) += arch/arm/nwfpe/
core-$(CONFIG_FPE_FASTFPE) += $(FASTFPE_OBJ)
core-$(CONFIG_VFP) += arch/arm/vfp/
+# If we have a machine-specific directory, then include it in the build.
+core-y += arch/arm/kernel/ arch/arm/mm/ arch/arm/common/
+core-y += $(machdirs) $(platdirs)
+
drivers-$(CONFIG_OPROFILE) += arch/arm/oprofile/
libs-y := arch/arm/lib/ $(libs-y)
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index 7dfa9a8..ada6359 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -67,25 +67,11 @@
/*
* Routines to acknowledge, disable and enable interrupts
- *
- * Linux assumes that when we're done with an interrupt we need to
- * unmask it, in the same way we need to unmask an interrupt when
- * we first enable it.
- *
- * The GIC has a separate notion of "end of interrupt" to re-enable
- * an interrupt after handling, in order to support hardware
- * prioritisation.
- *
- * We can make the GIC behave in the way that Linux expects by making
- * our "acknowledge" routine disable the interrupt, then mark it as
- * complete.
*/
static void gic_ack_irq(unsigned int irq)
{
- u32 mask = 1 << (irq % 32);
spin_lock(&irq_controller_lock);
- writel(mask, gic_dist_base(irq) + GIC_DIST_ENABLE_CLEAR + (gic_irq(irq) / 32) * 4);
writel(gic_irq(irq), gic_cpu_base(irq) + GIC_CPU_EOI);
spin_unlock(&irq_controller_lock);
}
diff --git a/arch/arm/configs/at91sam9g20ek_defconfig b/arch/arm/configs/at91sam9g20ek_defconfig
index f1bac70..9e90e6d 100644
--- a/arch/arm/configs/at91sam9g20ek_defconfig
+++ b/arch/arm/configs/at91sam9g20ek_defconfig
@@ -13,6 +13,7 @@
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91SAM9G20=y
CONFIG_MACH_AT91SAM9G20EK=y
+CONFIG_MACH_AT91SAM9G20EK_2MMC=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
# CONFIG_ARM_THUMB is not set
CONFIG_AEABI=y
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index ccc9c99..2f70428 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -15,6 +15,7 @@
CONFIG_MACH_SHEEVAPLUG=y
CONFIG_MACH_ESATA_SHEEVAPLUG=y
CONFIG_MACH_GURUPLUG=y
+CONFIG_MACH_DOCKSTAR=y
CONFIG_MACH_TS219=y
CONFIG_MACH_TS41X=y
CONFIG_MACH_OPENRD_BASE=y
diff --git a/arch/arm/configs/mx27_defconfig b/arch/arm/configs/mx27_defconfig
index b2038b0..813cfb3 100644
--- a/arch/arm/configs/mx27_defconfig
+++ b/arch/arm/configs/mx27_defconfig
@@ -21,8 +21,14 @@
CONFIG_MACH_MX27=y
CONFIG_MACH_MX27ADS=y
CONFIG_MACH_PCM038=y
+CONFIG_MACH_CPUIMX27=y
+CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2=y
+CONFIG_MACH_EUKREA_CPUIMX27_USEUART4=y
CONFIG_MACH_MX27_3DS=y
+CONFIG_MACH_IMX27_VISSTRIM_M10=y
CONFIG_MACH_IMX27LITE=y
+CONFIG_MACH_PCA100=y
+CONFIG_MACH_MXT_TD60=y
CONFIG_MXC_IRQ_PRIOR=y
CONFIG_MXC_PWM=y
CONFIG_NO_HZ=y
@@ -76,7 +82,9 @@
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=m
# CONFIG_SERIO is not set
+CONFIG_SERIAL_8250=m
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
# CONFIG_LEGACY_PTYS is not set
@@ -85,19 +93,20 @@
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_IMX=y
CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
+CONFIG_SPI_IMX=y
CONFIG_W1=y
CONFIG_W1_MASTER_MXC=y
CONFIG_W1_SLAVE_THERM=y
# CONFIG_HWMON is not set
CONFIG_FB=y
CONFIG_FB_IMX=y
-# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB=m
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_ULPI=y
CONFIG_MMC=y
CONFIG_MMC_MXC=y
CONFIG_RTC_CLASS=y
diff --git a/arch/arm/configs/mx31pdk_defconfig b/arch/arm/configs/mx31pdk_defconfig
deleted file mode 100644
index 2d29329..0000000
--- a/arch/arm/configs/mx31pdk_defconfig
+++ /dev/null
@@ -1,44 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_COMPAT_BRK is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_MXC=y
-# CONFIG_MACH_MX31ADS is not set
-CONFIG_MACH_MX31_3DS=y
-CONFIG_AEABI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_LRO is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRC32 is not set
diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig
index 161f907..f0c339f 100644
--- a/arch/arm/configs/mx3_defconfig
+++ b/arch/arm/configs/mx3_defconfig
@@ -24,6 +24,7 @@
CONFIG_MACH_ARMADILLO5X0=y
CONFIG_MACH_MX35_3DS=y
CONFIG_MACH_KZM_ARM11_01=y
+CONFIG_MACH_EUKREA_CPUIMX35=y
CONFIG_MXC_IRQ_PRIOR=y
CONFIG_MXC_PWM=y
CONFIG_NO_HZ=y
@@ -108,7 +109,6 @@
CONFIG_MMC_MXC=y
CONFIG_DMADEVICES=y
# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_UBIFS_FS=y
diff --git a/arch/arm/configs/mx51_defconfig b/arch/arm/configs/mx51_defconfig
index a665ecb..163cfee 100644
--- a/arch/arm/configs/mx51_defconfig
+++ b/arch/arm/configs/mx51_defconfig
@@ -15,6 +15,8 @@
CONFIG_ARCH_MXC=y
CONFIG_ARCH_MX5=y
CONFIG_MACH_MX51_BABBAGE=y
+CONFIG_MACH_MX51_3DS=y
+CONFIG_MACH_EUKREA_CPUIMX51=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT_VOLUNTARY=y
@@ -69,7 +71,6 @@
CONFIG_NATIONAL_PHY=y
CONFIG_STE10XP=y
CONFIG_LSI_ET1011C_PHY=y
-CONFIG_FIXED_PHY=y
CONFIG_MDIO_BITBANG=y
CONFIG_MDIO_GPIO=y
CONFIG_NET_ETHERNET=y
@@ -100,7 +101,6 @@
CONFIG_I2C_ALGOPCA=m
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
# CONFIG_HID_SUPPORT is not set
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
@@ -117,13 +117,11 @@
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
-CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
-CONFIG_INOTIFY=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
@@ -136,6 +134,7 @@
CONFIG_UDF_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
CONFIG_CONFIGFS_FS=m
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -151,7 +150,6 @@
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -159,7 +157,6 @@
# CONFIG_ARM_UNWIND is not set
CONFIG_DEBUG_LL=y
CONFIG_EARLY_PRINTK=y
-CONFIG_KEYS=y
CONFIG_SECURITYFS=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index 5747a8b..8bb66bc 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -127,4 +127,8 @@
extern unsigned long arch_randomize_brk(struct mm_struct *mm);
#define arch_randomize_brk arch_randomize_brk
+extern int vectors_user_mapping(void);
+#define arch_setup_additional_pages(bprm, uses_interp) vectors_user_mapping()
+#define ARCH_HAS_SETUP_ADDITIONAL_PAGES
+
#endif
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index 1261b1f9..815efa2 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -294,6 +294,7 @@
#define ARCH_HAS_VALID_PHYS_ADDR_RANGE
extern int valid_phys_addr_range(unsigned long addr, size_t size);
extern int valid_mmap_phys_addr_range(unsigned long pfn, size_t size);
+extern int devmem_is_allowed(unsigned long pfn);
#endif
/*
diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h
index a0b3cac..71605d9 100644
--- a/arch/arm/include/asm/mmu_context.h
+++ b/arch/arm/include/asm/mmu_context.h
@@ -18,7 +18,6 @@
#include <asm/cacheflush.h>
#include <asm/cachetype.h>
#include <asm/proc-fns.h>
-#include <asm-generic/mm_hooks.h>
void __check_kvm_seq(struct mm_struct *mm);
@@ -134,4 +133,32 @@
#define deactivate_mm(tsk,mm) do { } while (0)
#define activate_mm(prev,next) switch_mm(prev, next, NULL)
+/*
+ * We are inserting a "fake" vma for the user-accessible vector page so
+ * gdb and friends can get to it through ptrace and /proc/<pid>/mem.
+ * But we also want to remove it before the generic code gets to see it
+ * during process exit or the unmapping of it would cause total havoc.
+ * (the macro is used as remove_vma() is static to mm/mmap.c)
+ */
+#define arch_exit_mmap(mm) \
+do { \
+ struct vm_area_struct *high_vma = find_vma(mm, 0xffff0000); \
+ if (high_vma) { \
+ BUG_ON(high_vma->vm_next); /* it should be last */ \
+ if (high_vma->vm_prev) \
+ high_vma->vm_prev->vm_next = NULL; \
+ else \
+ mm->mmap = NULL; \
+ rb_erase(&high_vma->vm_rb, &mm->mm_rb); \
+ mm->mmap_cache = NULL; \
+ mm->map_count--; \
+ remove_vma(high_vma); \
+ } \
+} while (0)
+
+static inline void arch_dup_mmap(struct mm_struct *oldmm,
+ struct mm_struct *mm)
+{
+}
+
#endif
diff --git a/arch/arm/include/asm/seccomp.h b/arch/arm/include/asm/seccomp.h
new file mode 100644
index 0000000..52b156b
--- /dev/null
+++ b/arch/arm/include/asm/seccomp.h
@@ -0,0 +1,11 @@
+#ifndef _ASM_ARM_SECCOMP_H
+#define _ASM_ARM_SECCOMP_H
+
+#include <linux/unistd.h>
+
+#define __NR_seccomp_read __NR_read
+#define __NR_seccomp_write __NR_write
+#define __NR_seccomp_exit __NR_exit
+#define __NR_seccomp_sigreturn __NR_rt_sigreturn
+
+#endif /* _ASM_ARM_SECCOMP_H */
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index 763e29f..7b5cc8d 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -144,6 +144,7 @@
#define TIF_MEMDIE 18 /* is terminating due to OOM killer */
#define TIF_FREEZE 19
#define TIF_RESTORE_SIGMASK 20
+#define TIF_SECCOMP 21
#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
@@ -153,6 +154,7 @@
#define _TIF_USING_IWMMXT (1 << TIF_USING_IWMMXT)
#define _TIF_FREEZE (1 << TIF_FREEZE)
#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK)
+#define _TIF_SECCOMP (1 << TIF_SECCOMP)
/*
* Change these and you break ASM code in entry-common.S
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 7885722b..0385a82 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -295,7 +295,6 @@
get_thread_info tsk
adr tbl, sys_call_table @ load syscall table pointer
- ldr ip, [tsk, #TI_FLAGS] @ check for syscall tracing
#if defined(CONFIG_OABI_COMPAT)
/*
@@ -312,8 +311,20 @@
eor scno, scno, #__NR_SYSCALL_BASE @ check OS number
#endif
+ ldr r10, [tsk, #TI_FLAGS] @ check for syscall tracing
stmdb sp!, {r4, r5} @ push fifth and sixth args
- tst ip, #_TIF_SYSCALL_TRACE @ are we tracing syscalls?
+
+#ifdef CONFIG_SECCOMP
+ tst r10, #_TIF_SECCOMP
+ beq 1f
+ mov r0, scno
+ bl __secure_computing
+ add r0, sp, #S_R0 + S_OFF @ pointer to regs
+ ldmia r0, {r0 - r3} @ have to reload r0 - r3
+1:
+#endif
+
+ tst r10, #_TIF_SYSCALL_TRACE @ are we tracing syscalls?
bne __sys_trace
cmp scno, #NR_syscalls @ check upper syscall limit
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 401e38b..66ac9c9 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -458,3 +458,24 @@
unsigned long range_end = mm->brk + 0x02000000;
return randomize_range(mm->brk, range_end, 0) ? : mm->brk;
}
+
+/*
+ * The vectors page is always readable from user space for the
+ * atomic helpers and the signal restart code. Let's declare a mapping
+ * for it so it is visible through ptrace and /proc/<pid>/mem.
+ */
+
+int vectors_user_mapping(void)
+{
+ struct mm_struct *mm = current->mm;
+ return install_special_mapping(mm, 0xffff0000, PAGE_SIZE,
+ VM_READ | VM_EXEC |
+ VM_MAYREAD | VM_MAYEXEC |
+ VM_ALWAYSDUMP | VM_RESERVED,
+ NULL);
+}
+
+const char *arch_vma_name(struct vm_area_struct *vma)
+{
+ return (vma->vm_start == 0xffff0000) ? "[vectors]" : NULL;
+}
diff --git a/arch/arm/mach-aaec2000/include/mach/vmalloc.h b/arch/arm/mach-aaec2000/include/mach/vmalloc.h
index 551f68f..cff4e0a 100644
--- a/arch/arm/mach-aaec2000/include/mach/vmalloc.h
+++ b/arch/arm/mach-aaec2000/include/mach/vmalloc.h
@@ -11,6 +11,6 @@
#ifndef __ASM_ARCH_VMALLOC_H
#define __ASM_ARCH_VMALLOC_H
-#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
+#define VMALLOC_END 0xd0000000
#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 939bccd..bbd5efa 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -33,6 +33,7 @@
select HAVE_AT91_USART3
select HAVE_AT91_USART4
select HAVE_AT91_USART5
+ select HAVE_NET_MACB
config ARCH_AT91SAM9261
bool "AT91SAM9261"
@@ -51,6 +52,7 @@
select CPU_ARM926T
select GENERIC_CLOCKEVENTS
select HAVE_FB_ATMEL
+ select HAVE_NET_MACB
config ARCH_AT91SAM9RL
bool "AT91SAM9RL"
@@ -66,6 +68,7 @@
select HAVE_AT91_USART3
select HAVE_AT91_USART4
select HAVE_AT91_USART5
+ select HAVE_NET_MACB
config ARCH_AT91SAM9G45
bool "AT91SAM9G45"
@@ -73,6 +76,7 @@
select GENERIC_CLOCKEVENTS
select HAVE_AT91_USART3
select HAVE_FB_ATMEL
+ select HAVE_NET_MACB
config ARCH_AT91CAP9
bool "AT91CAP9"
@@ -338,6 +342,7 @@
that embeds only one SD/MMC slot.
config MACH_AT91SAM9G20EK_2MMC
+ depends on MACH_AT91SAM9G20EK
bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
select HAVE_NAND_ATMEL_BUSWIDTH_16
help
@@ -383,8 +388,8 @@
comment "AT91SAM9G45 Board Type"
-config MACH_AT91SAM9G45EKES
- bool "Atmel AT91SAM9G45-EKES Evaluation Kit"
+config MACH_AT91SAM9M10G45EK
+ bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
select HAVE_NAND_ATMEL_BUSWIDTH_16
help
Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit.
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index ca2ac00..3a07a36 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -61,7 +61,6 @@
# AT91SAM9G20 board-specific support
obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
-obj-$(CONFIG_MACH_AT91SAM9G20EK_2MMC) += board-sam9g20ek-2slot-mmc.o
obj-$(CONFIG_MACH_CPU9G20) += board-cpu9krea.o
obj-$(CONFIG_MACH_STAMP9G20) += board-stamp9g20.o
obj-$(CONFIG_MACH_PORTUXG20) += board-stamp9g20.o
@@ -70,7 +69,7 @@
obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o
# AT91SAM9G45 board-specific support
-obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o
+obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o
# AT91CAP9 board-specific support
obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o
diff --git a/arch/arm/mach-at91/board-at572d940hf_ek.c b/arch/arm/mach-at91/board-at572d940hf_ek.c
index 5daff27..4665162 100644
--- a/arch/arm/mach-at91/board-at572d940hf_ek.c
+++ b/arch/arm/mach-at91/board-at572d940hf_ek.c
@@ -216,7 +216,7 @@
/* .rdy_pin = AT91_PIN_PC16, */
.enable_pin = AT91_PIN_PA15,
.partition_info = nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
.bus_width_16 = 1,
#else
.bus_width_16 = 0,
diff --git a/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c b/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c
deleted file mode 100644
index c49f5c0..0000000
--- a/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c
+++ /dev/null
@@ -1,329 +0,0 @@
-/*
- * Copyright (C) 2005 SAN People
- * Copyright (C) 2008 Atmel
- * Copyright (C) 2009 Rob Emanuele
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/at73c213.h>
-#include <linux/clk.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/consumer.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/board.h>
-#include <mach/gpio.h>
-#include <mach/at91sam9_smc.h>
-
-#include "sam9_smc.h"
-#include "generic.h"
-
-
-static void __init ek_map_io(void)
-{
- /* Initialize processor: 18.432 MHz crystal */
- at91sam9260_initialize(18432000);
-
- /* DGBU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
-}
-
-static void __init ek_init_irq(void)
-{
- at91sam9260_init_interrupts(NULL);
-}
-
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata ek_usbh_data = {
- .ports = 2,
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata ek_udc_data = {
- .vbus_pin = AT91_PIN_PC5,
- .pullup_pin = 0, /* pull-up driven by UDC */
-};
-
-
-/*
- * SPI devices.
- */
-static struct spi_board_info ek_spi_devices[] = {
-#if !(defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_AT91))
- { /* DataFlash chip */
- .modalias = "mtd_dataflash",
- .chip_select = 1,
- .max_speed_hz = 15 * 1000 * 1000,
- .bus_num = 0,
- },
-#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
- { /* DataFlash card */
- .modalias = "mtd_dataflash",
- .chip_select = 0,
- .max_speed_hz = 15 * 1000 * 1000,
- .bus_num = 0,
- },
-#endif
-#endif
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct at91_eth_data __initdata ek_macb_data = {
- .phy_irq_pin = AT91_PIN_PB0,
- .is_rmii = 1,
-};
-
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata ek_nand_partition[] = {
- {
- .name = "Bootstrap",
- .offset = 0,
- .size = 4 * SZ_1M,
- },
- {
- .name = "Partition 1",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 60 * SZ_1M,
- },
- {
- .name = "Partition 2",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(ek_nand_partition);
- return ek_nand_partition;
-}
-
-/* det_pin is not connected */
-static struct atmel_nand_data __initdata ek_nand_data = {
- .ale = 21,
- .cle = 22,
- .rdy_pin = AT91_PIN_PC13,
- .enable_pin = AT91_PIN_PC14,
- .partition_info = nand_partitions,
-#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
- .bus_width_16 = 1,
-#else
- .bus_width_16 = 0,
-#endif
-};
-
-static struct sam9_smc_config __initdata ek_nand_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 2,
- .ncs_write_setup = 0,
- .nwe_setup = 2,
-
- .ncs_read_pulse = 4,
- .nrd_pulse = 4,
- .ncs_write_pulse = 4,
- .nwe_pulse = 4,
-
- .read_cycle = 7,
- .write_cycle = 7,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
- .tdf_cycles = 3,
-};
-
-static void __init ek_add_device_nand(void)
-{
- /* setup bus-width (8 or 16) */
- if (ek_nand_data.bus_width_16)
- ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
- else
- ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
-
- /* configure chip-select 3 (NAND) */
- sam9_smc_configure(3, &ek_nand_smc_config);
-
- at91_add_device_nand(&ek_nand_data);
-}
-
-
-/*
- * MCI (SD/MMC)
- * wp_pin is not connected
- */
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
-static struct mci_platform_data __initdata ek_mmc_data = {
- .slot[0] = {
- .bus_width = 4,
- .detect_pin = AT91_PIN_PC2,
- .wp_pin = -ENODEV,
- },
- .slot[1] = {
- .bus_width = 4,
- .detect_pin = AT91_PIN_PC9,
- .wp_pin = -ENODEV,
- },
-
-};
-#else
-static struct at91_mmc_data __initdata ek_mmc_data = {
- .slot_b = 1, /* Only one slot so use slot B */
- .wire4 = 1,
- .det_pin = AT91_PIN_PC9,
-};
-#endif
-
-/*
- * LEDs
- */
-static struct gpio_led ek_leds[] = {
- { /* "bottom" led, green, userled1 to be defined */
- .name = "ds5",
- .gpio = AT91_PIN_PB8,
- .active_low = 1,
- .default_trigger = "none",
- },
- { /* "power" led, yellow */
- .name = "ds1",
- .gpio = AT91_PIN_PB9,
- .default_trigger = "heartbeat",
- }
-};
-
-#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
-static struct regulator_consumer_supply ek_audio_consumer_supplies[] = {
- REGULATOR_SUPPLY("AVDD", "0-001b"),
- REGULATOR_SUPPLY("HPVDD", "0-001b"),
- REGULATOR_SUPPLY("DBVDD", "0-001b"),
- REGULATOR_SUPPLY("DCVDD", "0-001b"),
-};
-
-static struct regulator_init_data ek_avdd_reg_init_data = {
- .constraints = {
- .name = "3V3",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .consumer_supplies = ek_audio_consumer_supplies,
- .num_consumer_supplies = ARRAY_SIZE(ek_audio_consumer_supplies),
-};
-
-static struct fixed_voltage_config ek_vdd_pdata = {
- .supply_name = "board-3V3",
- .microvolts = 3300000,
- .gpio = -EINVAL,
- .enabled_at_boot = 0,
- .init_data = &ek_avdd_reg_init_data,
-};
-static struct platform_device ek_voltage_regulator = {
- .name = "reg-fixed-voltage",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &ek_vdd_pdata,
- },
-};
-static void __init ek_add_regulators(void)
-{
- platform_device_register(&ek_voltage_regulator);
-}
-#else
-static void __init ek_add_regulators(void) {}
-#endif
-
-static struct i2c_board_info __initdata ek_i2c_devices[] = {
- {
- I2C_BOARD_INFO("24c512", 0x50),
- },
-};
-
-
-static void __init ek_board_init(void)
-{
- /* Serial */
- at91_add_device_serial();
- /* USB Host */
- at91_add_device_usbh(&ek_usbh_data);
- /* USB Device */
- at91_add_device_udc(&ek_udc_data);
- /* SPI */
- at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
- /* NAND */
- ek_add_device_nand();
- /* Ethernet */
- at91_add_device_eth(&ek_macb_data);
- /* Regulators */
- ek_add_regulators();
- /* MMC */
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
- at91_add_device_mci(0, &ek_mmc_data);
-#else
- at91_add_device_mmc(0, &ek_mmc_data);
-#endif
- /* I2C */
- at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
- /* LEDs */
- at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
- /* PCK0 provides MCLK to the WM8731 */
- at91_set_B_periph(AT91_PIN_PC1, 0);
- /* SSC (for WM8731) */
- at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
-}
-
-MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod")
- /* Maintainer: Rob Emanuele */
- .phys_io = AT91_BASE_SYS,
- .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
- .boot_params = AT91_SDRAM_BASE + 0x100,
- .timer = &at91sam926x_timer,
- .map_io = ek_map_io,
- .init_irq = ek_init_irq,
- .init_machine = ek_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 6ea9808..b463e34 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -47,6 +47,18 @@
#include "sam9_smc.h"
#include "generic.h"
+/*
+ * board revision encoding
+ * bit 0:
+ * 0 => 1 sd/mmc slot
+ * 1 => 2 sd/mmc slots connectors (board from revision C)
+ */
+#define HAVE_2MMC (1 << 0)
+static int inline ek_have_2mmc(void)
+{
+ return machine_is_at91sam9g20ek_2mmc() || (system_rev & HAVE_2MMC);
+}
+
static void __init ek_map_io(void)
{
@@ -94,7 +106,7 @@
* SPI devices.
*/
static struct spi_board_info ek_spi_devices[] = {
-#if !defined(CONFIG_MMC_AT91)
+#if !(defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_AT91))
{ /* DataFlash chip */
.modalias = "mtd_dataflash",
.chip_select = 1,
@@ -121,6 +133,13 @@
.is_rmii = 1,
};
+static void __init ek_add_device_macb(void)
+{
+ if (ek_have_2mmc())
+ ek_macb_data.phy_irq_pin = AT91_PIN_PB0;
+
+ at91_add_device_eth(&ek_macb_data);
+}
/*
* NAND flash
@@ -198,13 +217,36 @@
/*
* MCI (SD/MMC)
- * det_pin, wp_pin and vcc_pin are not connected
+ * wp_pin and vcc_pin are not connected
*/
-static struct at91_mmc_data __initdata ek_mmc_data = {
- .slot_b = 1,
- .wire4 = 1,
-};
+#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
+static struct mci_platform_data __initdata ek_mmc_data = {
+ .slot[1] = {
+ .bus_width = 4,
+ .detect_pin = AT91_PIN_PC9,
+ },
+};
+#else
+static struct at91_mmc_data __initdata ek_mmc_data = {
+ .slot_b = 1, /* Only one slot so use slot B */
+ .wire4 = 1,
+ .det_pin = AT91_PIN_PC9,
+};
+#endif
+
+static void __init ek_add_device_mmc(void)
+{
+#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
+ if (ek_have_2mmc()) {
+ ek_mmc_data.slot[0].bus_width = 4;
+ ek_mmc_data.slot[0].detect_pin = AT91_PIN_PC2;
+ }
+ at91_add_device_mci(0, &ek_mmc_data);
+#else
+ at91_add_device_mmc(0, &ek_mmc_data);
+#endif
+}
/*
* LEDs
@@ -223,6 +265,15 @@
}
};
+static void __init ek_add_device_gpio_leds(void)
+{
+ if (ek_have_2mmc()) {
+ ek_leds[0].gpio = AT91_PIN_PB8;
+ ek_leds[1].gpio = AT91_PIN_PB9;
+ }
+
+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+}
/*
* GPIO Buttons
@@ -336,15 +387,15 @@
/* NAND */
ek_add_device_nand();
/* Ethernet */
- at91_add_device_eth(&ek_macb_data);
+ ek_add_device_macb();
/* Regulators */
ek_add_regulators();
/* MMC */
- at91_add_device_mmc(0, &ek_mmc_data);
+ ek_add_device_mmc();
/* I2C */
at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
/* LEDs */
- at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+ ek_add_device_gpio_leds();
/* Push Buttons */
ek_add_device_buttons();
/* PCK0 provides MCLK to the WM8731 */
@@ -363,3 +414,14 @@
.init_irq = ek_init_irq,
.init_machine = ek_board_init,
MACHINE_END
+
+MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod")
+ /* Maintainer: Atmel */
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91sam926x_timer,
+ .map_io = ek_map_io,
+ .init_irq = ek_init_irq,
+ .init_machine = ek_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index ee80059..ae0e084 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -135,7 +135,7 @@
.rdy_pin = AT91_PIN_PC8,
.enable_pin = AT91_PIN_PC14,
.partition_info = nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
.bus_width_16 = 1,
#else
.bus_width_16 = 0,
@@ -399,7 +399,7 @@
at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
}
-MACHINE_START(AT91SAM9G45EKES, "Atmel AT91SAM9G45-EKES")
+MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK")
/* Maintainer: Atmel */
.phys_io = AT91_BASE_SYS,
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
diff --git a/arch/arm/mach-at91/include/mach/at91x40.h b/arch/arm/mach-at91/include/mach/at91x40.h
index d34cdb8..063ac44 100644
--- a/arch/arm/mach-at91/include/mach/at91x40.h
+++ b/arch/arm/mach-at91/include/mach/at91x40.h
@@ -52,4 +52,10 @@
#define AT91_DBGU_CIDR (AT91_SF + 0) /* CIDR in PS segment */
#define AT91_DBGU_EXID (AT91_SF + 4) /* EXID in PS segment */
+/*
+ * Support defines for the simple Power Controller module.
+ */
+#define AT91_PS_CR (AT91_PS + 0) /* PS Control register */
+#define AT91_PS_CR_CPU (1 << 0) /* CPU clock disable bit */
+
#endif /* AT91X40_H */
diff --git a/arch/arm/mach-at91/include/mach/system.h b/arch/arm/mach-at91/include/mach/system.h
index ee8db15..36af14b 100644
--- a/arch/arm/mach-at91/include/mach/system.h
+++ b/arch/arm/mach-at91/include/mach/system.h
@@ -32,7 +32,11 @@
* Disable the processor clock. The processor will be automatically
* re-enabled by an interrupt or by a reset.
*/
+#ifdef AT91_PS
+ at91_sys_write(AT91_PS_CR, AT91_PS_CR_CPU);
+#else
at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+#endif
#ifndef CONFIG_CPU_ARM920T
/*
* Set the processor (CP15) into 'Wait for Interrupt' mode.
diff --git a/arch/arm/mach-bcmring/include/mach/vmalloc.h b/arch/arm/mach-bcmring/include/mach/vmalloc.h
index 35e2ead..3db3a09 100644
--- a/arch/arm/mach-bcmring/include/mach/vmalloc.h
+++ b/arch/arm/mach-bcmring/include/mach/vmalloc.h
@@ -22,4 +22,4 @@
* 0xe0000000 to 0xefffffff. This gives us 256 MB of vm space and handles
* larger physical memory designs better.
*/
-#define VMALLOC_END (PAGE_OFFSET + 0x30000000)
+#define VMALLOC_END 0xf0000000
diff --git a/arch/arm/mach-clps711x/include/mach/vmalloc.h b/arch/arm/mach-clps711x/include/mach/vmalloc.h
index ea6cc7b..30b3a287 100644
--- a/arch/arm/mach-clps711x/include/mach/vmalloc.h
+++ b/arch/arm/mach-clps711x/include/mach/vmalloc.h
@@ -17,4 +17,4 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
+#define VMALLOC_END 0xd0000000
diff --git a/arch/arm/mach-ebsa110/include/mach/vmalloc.h b/arch/arm/mach-ebsa110/include/mach/vmalloc.h
index 9b44c19..60bde56 100644
--- a/arch/arm/mach-ebsa110/include/mach/vmalloc.h
+++ b/arch/arm/mach-ebsa110/include/mach/vmalloc.h
@@ -7,4 +7,4 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#define VMALLOC_END (PAGE_OFFSET + 0x1f000000)
+#define VMALLOC_END 0xdf000000
diff --git a/arch/arm/mach-footbridge/include/mach/vmalloc.h b/arch/arm/mach-footbridge/include/mach/vmalloc.h
index d0958d8..0ffbb7c 100644
--- a/arch/arm/mach-footbridge/include/mach/vmalloc.h
+++ b/arch/arm/mach-footbridge/include/mach/vmalloc.h
@@ -7,4 +7,4 @@
*/
-#define VMALLOC_END (PAGE_OFFSET + 0x30000000)
+#define VMALLOC_END 0xf0000000
diff --git a/arch/arm/mach-h720x/include/mach/vmalloc.h b/arch/arm/mach-h720x/include/mach/vmalloc.h
index ff1460d..a45915b 100644
--- a/arch/arm/mach-h720x/include/mach/vmalloc.h
+++ b/arch/arm/mach-h720x/include/mach/vmalloc.h
@@ -5,6 +5,6 @@
#ifndef __ARCH_ARM_VMALLOC_H
#define __ARCH_ARM_VMALLOC_H
-#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
+#define VMALLOC_END 0xd0000000
#endif
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 2f7e272..197f9e2 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -147,8 +147,8 @@
default MACH_EUKREA_MBIMX27_BASEBOARD
config MACH_EUKREA_MBIMX27_BASEBOARD
- prompt "Eukrea MBIMX27 development board"
- bool
+ bool "Eukrea MBIMX27 development board"
+ select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_SPI_IMX
help
@@ -164,6 +164,15 @@
Include support for MX27PDK platform. This includes specific
configurations for the board and its peripherals.
+config MACH_IMX27_VISSTRIM_M10
+ bool "Vista Silicon i.MX27 Visstrim_m10"
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ help
+ Include support for Visstrim_m10 platform and its different variants.
+ This includes specific configurations for the board and its
+ peripherals.
+
config MACH_IMX27LITE
bool "LogicPD MX27 LITEKIT platform"
select IMX_HAVE_PLATFORM_IMX_UART
@@ -174,6 +183,7 @@
config MACH_PCA100
bool "Phytec phyCARD-s (pca100)"
select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SPI_IMX
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 46a9fdf..5582692 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -27,6 +27,7 @@
obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o
obj-$(CONFIG_MACH_IMX27LITE) += mach-imx27lite.o
+obj-$(CONFIG_MACH_IMX27_VISSTRIM_M10) += mach-imx27_visstrim_m10.o
obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o
obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
diff --git a/arch/arm/mach-imx/clock-imx1.c b/arch/arm/mach-imx/clock-imx1.c
index c05096c..daca30b 100644
--- a/arch/arm/mach-imx/clock-imx1.c
+++ b/arch/arm/mach-imx/clock-imx1.c
@@ -592,7 +592,7 @@
_REGISTER_CLOCK("imx-uart.1", NULL, uart_clk)
_REGISTER_CLOCK("imx-uart.2", NULL, uart_clk)
_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
- _REGISTER_CLOCK("spi_imx.0", NULL, spi_clk)
+ _REGISTER_CLOCK("imx1-cspi.0", NULL, spi_clk)
_REGISTER_CLOCK("imx-mmc.0", NULL, sdhc_clk)
_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
_REGISTER_CLOCK(NULL, "mshc", mshc_clk)
diff --git a/arch/arm/mach-imx/clock-imx21.c b/arch/arm/mach-imx/clock-imx21.c
index bb419ef..cf15ea5 100644
--- a/arch/arm/mach-imx/clock-imx21.c
+++ b/arch/arm/mach-imx/clock-imx21.c
@@ -1172,9 +1172,9 @@
_REGISTER_CLOCK(NULL, "pwm", pwm_clk[0])
_REGISTER_CLOCK(NULL, "sdhc1", sdhc_clk[0])
_REGISTER_CLOCK(NULL, "sdhc2", sdhc_clk[1])
- _REGISTER_CLOCK(NULL, "cspi1", cspi_clk[0])
- _REGISTER_CLOCK(NULL, "cspi2", cspi_clk[1])
- _REGISTER_CLOCK(NULL, "cspi3", cspi_clk[2])
+ _REGISTER_CLOCK("imx21-cspi.0", NULL, cspi_clk[0])
+ _REGISTER_CLOCK("imx21-cspi.1", NULL, cspi_clk[1])
+ _REGISTER_CLOCK("imx21-cspi.2", NULL, cspi_clk[2])
_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk[0])
_REGISTER_CLOCK(NULL, "csi", csi_clk[0])
_REGISTER_CLOCK("imx21-hcd.0", NULL, usb_clk[0])
diff --git a/arch/arm/mach-imx/clock-imx27.c b/arch/arm/mach-imx/clock-imx27.c
index 5a1aa15..98a25ba 100644
--- a/arch/arm/mach-imx/clock-imx27.c
+++ b/arch/arm/mach-imx/clock-imx27.c
@@ -594,27 +594,27 @@
DEFINE_CLOCK(uart1_clk1, 0, PCCR1, 31, NULL, NULL, &ipg_clk);
/* Clocks we cannot directly gate, but drivers need their rates */
-DEFINE_CLOCK(cspi1_clk, 0, 0, 0, NULL, &cspi1_clk1, &per2_clk);
-DEFINE_CLOCK(cspi2_clk, 1, 0, 0, NULL, &cspi2_clk1, &per2_clk);
-DEFINE_CLOCK(cspi3_clk, 2, 0, 0, NULL, &cspi13_clk1, &per2_clk);
-DEFINE_CLOCK(sdhc1_clk, 0, 0, 0, NULL, &sdhc1_clk1, &per2_clk);
-DEFINE_CLOCK(sdhc2_clk, 1, 0, 0, NULL, &sdhc2_clk1, &per2_clk);
-DEFINE_CLOCK(sdhc3_clk, 2, 0, 0, NULL, &sdhc3_clk1, &per2_clk);
-DEFINE_CLOCK(pwm_clk, 0, 0, 0, NULL, &pwm_clk1, &per1_clk);
-DEFINE_CLOCK(gpt1_clk, 0, 0, 0, NULL, &gpt1_clk1, &per1_clk);
-DEFINE_CLOCK(gpt2_clk, 1, 0, 0, NULL, &gpt2_clk1, &per1_clk);
-DEFINE_CLOCK(gpt3_clk, 2, 0, 0, NULL, &gpt3_clk1, &per1_clk);
-DEFINE_CLOCK(gpt4_clk, 3, 0, 0, NULL, &gpt4_clk1, &per1_clk);
-DEFINE_CLOCK(gpt5_clk, 4, 0, 0, NULL, &gpt5_clk1, &per1_clk);
-DEFINE_CLOCK(gpt6_clk, 5, 0, 0, NULL, &gpt6_clk1, &per1_clk);
-DEFINE_CLOCK(uart1_clk, 0, 0, 0, NULL, &uart1_clk1, &per1_clk);
-DEFINE_CLOCK(uart2_clk, 1, 0, 0, NULL, &uart2_clk1, &per1_clk);
-DEFINE_CLOCK(uart3_clk, 2, 0, 0, NULL, &uart3_clk1, &per1_clk);
-DEFINE_CLOCK(uart4_clk, 3, 0, 0, NULL, &uart4_clk1, &per1_clk);
-DEFINE_CLOCK(uart5_clk, 4, 0, 0, NULL, &uart5_clk1, &per1_clk);
-DEFINE_CLOCK(uart6_clk, 5, 0, 0, NULL, &uart6_clk1, &per1_clk);
-DEFINE_CLOCK1(lcdc_clk, 0, 0, 0, parent, &lcdc_clk1, &per3_clk);
-DEFINE_CLOCK1(csi_clk, 0, 0, 0, parent, &csi_clk1, &per4_clk);
+DEFINE_CLOCK(cspi1_clk, 0, NULL, 0, NULL, &cspi1_clk1, &per2_clk);
+DEFINE_CLOCK(cspi2_clk, 1, NULL, 0, NULL, &cspi2_clk1, &per2_clk);
+DEFINE_CLOCK(cspi3_clk, 2, NULL, 0, NULL, &cspi13_clk1, &per2_clk);
+DEFINE_CLOCK(sdhc1_clk, 0, NULL, 0, NULL, &sdhc1_clk1, &per2_clk);
+DEFINE_CLOCK(sdhc2_clk, 1, NULL, 0, NULL, &sdhc2_clk1, &per2_clk);
+DEFINE_CLOCK(sdhc3_clk, 2, NULL, 0, NULL, &sdhc3_clk1, &per2_clk);
+DEFINE_CLOCK(pwm_clk, 0, NULL, 0, NULL, &pwm_clk1, &per1_clk);
+DEFINE_CLOCK(gpt1_clk, 0, NULL, 0, NULL, &gpt1_clk1, &per1_clk);
+DEFINE_CLOCK(gpt2_clk, 1, NULL, 0, NULL, &gpt2_clk1, &per1_clk);
+DEFINE_CLOCK(gpt3_clk, 2, NULL, 0, NULL, &gpt3_clk1, &per1_clk);
+DEFINE_CLOCK(gpt4_clk, 3, NULL, 0, NULL, &gpt4_clk1, &per1_clk);
+DEFINE_CLOCK(gpt5_clk, 4, NULL, 0, NULL, &gpt5_clk1, &per1_clk);
+DEFINE_CLOCK(gpt6_clk, 5, NULL, 0, NULL, &gpt6_clk1, &per1_clk);
+DEFINE_CLOCK(uart1_clk, 0, NULL, 0, NULL, &uart1_clk1, &per1_clk);
+DEFINE_CLOCK(uart2_clk, 1, NULL, 0, NULL, &uart2_clk1, &per1_clk);
+DEFINE_CLOCK(uart3_clk, 2, NULL, 0, NULL, &uart3_clk1, &per1_clk);
+DEFINE_CLOCK(uart4_clk, 3, NULL, 0, NULL, &uart4_clk1, &per1_clk);
+DEFINE_CLOCK(uart5_clk, 4, NULL, 0, NULL, &uart5_clk1, &per1_clk);
+DEFINE_CLOCK(uart6_clk, 5, NULL, 0, NULL, &uart6_clk1, &per1_clk);
+DEFINE_CLOCK1(lcdc_clk, 0, NULL, 0, parent, &lcdc_clk1, &per3_clk);
+DEFINE_CLOCK1(csi_clk, 0, NULL, 0, parent, &csi_clk1, &per4_clk);
#define _REGISTER_CLOCK(d, n, c) \
{ \
@@ -640,9 +640,9 @@
_REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
_REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
_REGISTER_CLOCK("mxc-mmc.2", NULL, sdhc3_clk)
- _REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
- _REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
- _REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
+ _REGISTER_CLOCK("imx27-cspi.0", NULL, cspi1_clk)
+ _REGISTER_CLOCK("imx27-cspi.1", NULL, cspi2_clk)
+ _REGISTER_CLOCK("imx27-cspi.2", NULL, cspi3_clk)
_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
_REGISTER_CLOCK("mx2-camera.0", NULL, csi_clk)
_REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk)
diff --git a/arch/arm/mach-imx/devices-imx1.h b/arch/arm/mach-imx/devices-imx1.h
index a8d94f0..8197948 100644
--- a/arch/arm/mach-imx/devices-imx1.h
+++ b/arch/arm/mach-imx/devices-imx1.h
@@ -9,10 +9,12 @@
#include <mach/mx1.h>
#include <mach/devices-common.h>
-#define imx1_add_i2c_imx(pdata) \
- imx_add_imx_i2c(0, MX1_I2C_BASE_ADDR, SZ_4K, MX1_INT_I2C, pdata)
+extern const struct imx_imx_i2c_data imx1_imx_i2c_data __initconst;
+#define imx1_add_imx_i2c(pdata) \
+ imx_add_imx_i2c(&imx1_imx_i2c_data, pdata)
-#define imx1_add_imx_uart0(pdata) \
- imx_add_imx_uart_3irq(0, MX1_UART1_BASE_ADDR, 0xd0, MX1_INT_UART1RX, MX1_INT_UART1TX, MX1_INT_UART1RTS, pdata)
-#define imx1_add_imx_uart1(pdata) \
- imx_add_imx_uart_3irq(0, MX1_UART2_BASE_ADDR, 0xd0, MX1_INT_UART2RX, MX1_INT_UART2TX, MX1_INT_UART2RTS, pdata)
+extern const struct imx_imx_uart_3irq_data imx1_imx_uart_data[] __initconst;
+#define imx1_add_imx_uart(id, pdata) \
+ imx_add_imx_uart_3irq(&imx1_imx_uart_data[id], pdata)
+#define imx1_add_imx_uart0(pdata) imx1_add_imx_uart(0, pdata)
+#define imx1_add_imx_uart1(pdata) imx1_add_imx_uart(1, pdata)
diff --git a/arch/arm/mach-imx/devices-imx21.h b/arch/arm/mach-imx/devices-imx21.h
index 42788e9..d189039 100644
--- a/arch/arm/mach-imx/devices-imx21.h
+++ b/arch/arm/mach-imx/devices-imx21.h
@@ -9,22 +9,28 @@
#include <mach/mx21.h>
#include <mach/devices-common.h>
-#define imx21_add_i2c_imx(pdata) \
- imx_add_imx_i2c(0, MX2x_I2C_BASE_ADDR, SZ_4K, MX2x_INT_I2C, pdata)
+extern const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst;
+#define imx21_add_imx_i2c(pdata) \
+ imx_add_imx_i2c(&imx21_imx_i2c_data, pdata)
-#define imx21_add_imx_uart0(pdata) \
- imx_add_imx_uart_1irq(0, MX21_UART1_BASE_ADDR, SZ_4K, MX21_INT_UART1, pdata)
-#define imx21_add_imx_uart1(pdata) \
- imx_add_imx_uart_1irq(1, MX21_UART2_BASE_ADDR, SZ_4K, MX21_INT_UART2, pdata)
-#define imx21_add_imx_uart2(pdata) \
- imx_add_imx_uart_1irq(2, MX21_UART3_BASE_ADDR, SZ_4K, MX21_INT_UART3, pdata)
-#define imx21_add_imx_uart3(pdata) \
- imx_add_imx_uart_1irq(3, MX21_UART4_BASE_ADDR, SZ_4K, MX21_INT_UART4, pdata)
+extern const struct imx_imx_ssi_data imx21_imx_ssi_data[] __initconst;
+#define imx21_add_imx_ssi(id, pdata) \
+ imx_add_imx_ssi(&imx21_imx_ssi_data[id], pdata)
+extern const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst;
+#define imx21_add_imx_uart(id, pdata) \
+ imx_add_imx_uart_1irq(&imx21_imx_uart_data[id], pdata)
+#define imx21_add_imx_uart0(pdata) imx21_add_imx_uart(0, pdata)
+#define imx21_add_imx_uart1(pdata) imx21_add_imx_uart(1, pdata)
+#define imx21_add_imx_uart2(pdata) imx21_add_imx_uart(2, pdata)
+#define imx21_add_imx_uart3(pdata) imx21_add_imx_uart(3, pdata)
+
+extern const struct imx_mxc_nand_data imx21_mxc_nand_data __initconst;
#define imx21_add_mxc_nand(pdata) \
- imx_add_mxc_nand_v1(MX21_NFC_BASE_ADDR, MX21_INT_NANDFC, pdata)
+ imx_add_mxc_nand(&imx21_mxc_nand_data, pdata)
-#define imx21_add_spi_imx0(pdata) \
- imx_add_spi_imx(0, MX21_CSPI1_BASE_ADDR, SZ_4K, MX21_INT_CSPI1, pdata)
-#define imx21_add_spi_imx1(pdata) \
- imx_add_spi_imx(1, MX21_CSPI2_BASE_ADDR, SZ_4K, MX21_INT_CSPI2, pdata)
+extern const struct imx_spi_imx_data imx21_cspi_data[] __initconst;
+#define imx21_add_cspi(id, pdata) \
+ imx_add_spi_imx(&imx21_cspi_data[id], pdata)
+#define imx21_add_spi_imx0(pdata) imx21_add_cspi(0, pdata)
+#define imx21_add_spi_imx1(pdata) imx21_add_cspi(1, pdata)
diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h
index 65e7bb7..7011690 100644
--- a/arch/arm/mach-imx/devices-imx27.h
+++ b/arch/arm/mach-imx/devices-imx27.h
@@ -9,30 +9,35 @@
#include <mach/mx27.h>
#include <mach/devices-common.h>
-#define imx27_add_i2c_imx0(pdata) \
- imx_add_imx_i2c(0, MX27_I2C1_BASE_ADDR, SZ_4K, MX27_INT_I2C1, pdata)
-#define imx27_add_i2c_imx1(pdata) \
- imx_add_imx_i2c(1, MX27_I2C2_BASE_ADDR, SZ_4K, MX27_INT_I2C2, pdata)
+extern const struct imx_fec_data imx27_fec_data __initconst;
+#define imx27_add_fec(pdata) \
+ imx_add_fec(&imx27_fec_data, pdata)
-#define imx27_add_imx_uart0(pdata) \
- imx_add_imx_uart_1irq(0, MX27_UART1_BASE_ADDR, SZ_4K, MX27_INT_UART1, pdata)
-#define imx27_add_imx_uart1(pdata) \
- imx_add_imx_uart_1irq(1, MX27_UART2_BASE_ADDR, SZ_4K, MX27_INT_UART2, pdata)
-#define imx27_add_imx_uart2(pdata) \
- imx_add_imx_uart_1irq(2, MX27_UART3_BASE_ADDR, SZ_4K, MX27_INT_UART3, pdata)
-#define imx27_add_imx_uart3(pdata) \
- imx_add_imx_uart_1irq(3, MX27_UART4_BASE_ADDR, SZ_4K, MX27_INT_UART4, pdata)
-#define imx27_add_imx_uart4(pdata) \
- imx_add_imx_uart_1irq(4, MX27_UART5_BASE_ADDR, SZ_4K, MX27_INT_UART5, pdata)
-#define imx27_add_imx_uart5(pdata) \
- imx_add_imx_uart_1irq(5, MX27_UART6_BASE_ADDR, SZ_4K, MX27_INT_UART6, pdata)
+extern const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst;
+#define imx27_add_imx_i2c(id, pdata) \
+ imx_add_imx_i2c(&imx27_imx_i2c_data[id], pdata)
+extern const struct imx_imx_ssi_data imx27_imx_ssi_data[] __initconst;
+#define imx27_add_imx_ssi(id, pdata) \
+ imx_add_imx_ssi(&imx27_imx_ssi_data[id], pdata)
+
+extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst;
+#define imx27_add_imx_uart(id, pdata) \
+ imx_add_imx_uart_1irq(&imx27_imx_uart_data[id], pdata)
+#define imx27_add_imx_uart0(pdata) imx27_add_imx_uart(0, pdata)
+#define imx27_add_imx_uart1(pdata) imx27_add_imx_uart(1, pdata)
+#define imx27_add_imx_uart2(pdata) imx27_add_imx_uart(2, pdata)
+#define imx27_add_imx_uart3(pdata) imx27_add_imx_uart(3, pdata)
+#define imx27_add_imx_uart4(pdata) imx27_add_imx_uart(4, pdata)
+#define imx27_add_imx_uart5(pdata) imx27_add_imx_uart(5, pdata)
+
+extern const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst;
#define imx27_add_mxc_nand(pdata) \
- imx_add_mxc_nand_v1(MX27_NFC_BASE_ADDR, MX27_INT_NANDFC, pdata)
+ imx_add_mxc_nand(&imx27_mxc_nand_data, pdata)
-#define imx27_add_spi_imx0(pdata) \
- imx_add_spi_imx(0, MX27_CSPI1_BASE_ADDR, SZ_4K, MX27_INT_CSPI1, pdata)
-#define imx27_add_spi_imx1(pdata) \
- imx_add_spi_imx(1, MX27_CSPI2_BASE_ADDR, SZ_4K, MX27_INT_CSPI2, pdata)
-#define imx27_add_spi_imx2(pdata) \
- imx_add_spi_imx(2, MX27_CSPI3_BASE_ADDR, SZ_4K, MX27_INT_CSPI3, pdata)
+extern const struct imx_spi_imx_data imx27_cspi_data[] __initconst;
+#define imx27_add_cspi(id, pdata) \
+ imx_add_spi_imx(&imx27_cspi_data[id], pdata)
+#define imx27_add_spi_imx0(pdata) imx27_add_cspi(0, pdata)
+#define imx27_add_spi_imx1(pdata) imx27_add_cspi(1, pdata)
+#define imx27_add_spi_imx2(pdata) imx27_add_cspi(2, pdata)
diff --git a/arch/arm/mach-imx/devices.c b/arch/arm/mach-imx/devices.c
index 9c271a7..fba5047 100644
--- a/arch/arm/mach-imx/devices.c
+++ b/arch/arm/mach-imx/devices.c
@@ -314,27 +314,6 @@
},
};
-#ifdef CONFIG_MACH_MX27
-static struct resource mxc_fec_resources[] = {
- {
- .start = MX27_FEC_BASE_ADDR,
- .end = MX27_FEC_BASE_ADDR + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX27_INT_FEC,
- .end = MX27_INT_FEC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_fec_device = {
- .name = "fec",
- .id = 0,
- .num_resources = ARRAY_SIZE(mxc_fec_resources),
- .resource = mxc_fec_resources,
-};
-#endif
-
static struct resource mxc_pwm_resources[] = {
{
.start = MX2x_PWM_BASE_ADDR,
@@ -480,41 +459,6 @@
};
#endif
-#define DEFINE_IMX_SSI_DMARES(_name, ssin, suffix) \
- { \
- .name = _name, \
- .start = MX2x_DMA_REQ_SSI ## ssin ## _ ## suffix, \
- .end = MX2x_DMA_REQ_SSI ## ssin ## _ ## suffix, \
- .flags = IORESOURCE_DMA, \
- }
-
-#define DEFINE_IMX_SSI_DEVICE(n, ssin, baseaddr, irq) \
- static struct resource imx_ssi_resources ## n[] = { \
- { \
- .start = MX2x_SSI ## ssin ## _BASE_ADDR, \
- .end = MX2x_SSI ## ssin ## _BASE_ADDR + 0x6f, \
- .flags = IORESOURCE_MEM, \
- }, { \
- .start = MX2x_INT_SSI1, \
- .end = MX2x_INT_SSI1, \
- .flags = IORESOURCE_IRQ, \
- }, \
- DEFINE_IMX_SSI_DMARES("tx0", ssin, TX0), \
- DEFINE_IMX_SSI_DMARES("rx0", ssin, RX0), \
- DEFINE_IMX_SSI_DMARES("tx1", ssin, TX1), \
- DEFINE_IMX_SSI_DMARES("rx1", ssin, RX1), \
- }; \
- \
- struct platform_device imx_ssi_device ## n = { \
- .name = "imx-ssi", \
- .id = n, \
- .num_resources = ARRAY_SIZE(imx_ssi_resources ## n), \
- .resource = imx_ssi_resources ## n, \
- }
-
-DEFINE_IMX_SSI_DEVICE(0, 1, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1);
-DEFINE_IMX_SSI_DEVICE(1, 2, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1);
-
/* GPIO port description */
#define DEFINE_MXC_GPIO_PORT_IRQ(SOC, n, _irq) \
{ \
diff --git a/arch/arm/mach-imx/devices.h b/arch/arm/mach-imx/devices.h
index efd4527..807f02a 100644
--- a/arch/arm/mach-imx/devices.h
+++ b/arch/arm/mach-imx/devices.h
@@ -16,7 +16,6 @@
extern struct platform_device mxc_wdt;
extern struct platform_device mxc_w1_master_device;
extern struct platform_device mxc_fb_device;
-extern struct platform_device mxc_fec_device;
extern struct platform_device mxc_pwm_device;
extern struct platform_device mxc_sdhc_device0;
extern struct platform_device mxc_sdhc_device1;
@@ -26,7 +25,5 @@
extern struct platform_device mxc_usbh1;
extern struct platform_device mxc_usbh2;
extern struct platform_device mx21_usbhc_device;
-extern struct platform_device imx_ssi_device0;
-extern struct platform_device imx_ssi_device1;
extern struct platform_device imx_kpp_device;
#endif
diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
index 4edc5f4..026263c 100644
--- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
@@ -36,13 +36,12 @@
#include <mach/hardware.h>
#include <mach/mmc.h>
#include <mach/spi.h>
-#include <mach/ssi.h>
#include <mach/audmux.h>
#include "devices-imx27.h"
#include "devices.h"
-static int eukrea_mbimx27_pins[] = {
+static const int eukrea_mbimx27_pins[] __initconst = {
/* UART2 */
PE3_PF_UART2_CTS,
PE4_PF_UART2_RTS,
@@ -311,7 +310,8 @@
.dat3_card_detect = 1,
};
-struct imx_ssi_platform_data eukrea_mbimx27_ssi_pdata = {
+static const
+struct imx_ssi_platform_data eukrea_mbimx27_ssi_pdata __initconst = {
.flags = IMX_SSI_DMA | IMX_SSI_USE_I2S_SLAVE,
};
@@ -357,7 +357,7 @@
i2c_register_board_info(0, eukrea_mbimx27_i2c_devices,
ARRAY_SIZE(eukrea_mbimx27_i2c_devices));
- mxc_register_device(&imx_ssi_device0, &eukrea_mbimx27_ssi_pdata);
+ imx27_add_imx_ssi(0, &eukrea_mbimx27_ssi_pdata);
#if defined(CONFIG_TOUCHSCREEN_ADS7846) \
|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index 6830afd..a1681fc 100644
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -46,7 +46,7 @@
#include "devices-imx27.h"
#include "devices.h"
-static int eukrea_cpuimx27_pins[] = {
+static const int eukrea_cpuimx27_pins[] __initconst = {
/* UART1 */
PE12_PF_UART1_TXD,
PE13_PF_UART1_RXD,
@@ -157,7 +157,6 @@
static struct platform_device *platform_devices[] __initdata = {
&eukrea_cpuimx27_nor_mtd_device,
- &mxc_fec_device,
&mxc_wdt,
&mxc_w1_master_device,
};
@@ -259,8 +258,9 @@
i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
- imx27_add_i2c_imx0(&cpuimx27_i2c1_data);
+ imx27_add_imx_i2c(0, &cpuimx27_i2c1_data);
+ imx27_add_fec(NULL);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
new file mode 100644
index 0000000..a0d78fa
--- /dev/null
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -0,0 +1,263 @@
+/*
+ * mach-imx27_visstrim_m10.c
+ *
+ * Copyright 2010 Javier Martin <javier.martin@vista-silicon.com>
+ *
+ * Based on mach-pcm038.c, mach-pca100.c, mach-mx27ads.c and others.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pca953x.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/common.h>
+#include <mach/mmc.h>
+#include <mach/iomux.h>
+#include <mach/mxc_ehci.h>
+
+#include "devices-imx27.h"
+#include "devices.h"
+
+#define OTG_PHY_CS_GPIO (GPIO_PORTF + 17)
+#define SDHC1_IRQ IRQ_GPIOB(25)
+
+static const int visstrim_m10_pins[] __initconst = {
+ /* UART1 (console) */
+ PE12_PF_UART1_TXD,
+ PE13_PF_UART1_RXD,
+ PE14_PF_UART1_CTS,
+ PE15_PF_UART1_RTS,
+ /* FEC */
+ PD0_AIN_FEC_TXD0,
+ PD1_AIN_FEC_TXD1,
+ PD2_AIN_FEC_TXD2,
+ PD3_AIN_FEC_TXD3,
+ PD4_AOUT_FEC_RX_ER,
+ PD5_AOUT_FEC_RXD1,
+ PD6_AOUT_FEC_RXD2,
+ PD7_AOUT_FEC_RXD3,
+ PD8_AF_FEC_MDIO,
+ PD9_AIN_FEC_MDC,
+ PD10_AOUT_FEC_CRS,
+ PD11_AOUT_FEC_TX_CLK,
+ PD12_AOUT_FEC_RXD0,
+ PD13_AOUT_FEC_RX_DV,
+ PD14_AOUT_FEC_RX_CLK,
+ PD15_AOUT_FEC_COL,
+ PD16_AIN_FEC_TX_ER,
+ PF23_AIN_FEC_TX_EN,
+ /* SDHC1 */
+ PE18_PF_SD1_D0,
+ PE19_PF_SD1_D1,
+ PE20_PF_SD1_D2,
+ PE21_PF_SD1_D3,
+ PE22_PF_SD1_CMD,
+ PE23_PF_SD1_CLK,
+ /* Both I2Cs */
+ PD17_PF_I2C_DATA,
+ PD18_PF_I2C_CLK,
+ PC5_PF_I2C2_SDA,
+ PC6_PF_I2C2_SCL,
+ /* USB OTG */
+ OTG_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
+ PC9_PF_USBOTG_DATA0,
+ PC11_PF_USBOTG_DATA1,
+ PC10_PF_USBOTG_DATA2,
+ PC13_PF_USBOTG_DATA3,
+ PC12_PF_USBOTG_DATA4,
+ PC7_PF_USBOTG_DATA5,
+ PC8_PF_USBOTG_DATA6,
+ PE25_PF_USBOTG_DATA7,
+ PE24_PF_USBOTG_CLK,
+ PE2_PF_USBOTG_DIR,
+ PE0_PF_USBOTG_NXT,
+ PE1_PF_USBOTG_STP,
+ PB23_PF_USB_PWR,
+ PB24_PF_USB_OC,
+};
+
+/* GPIOs used as events for applications */
+static struct gpio_keys_button visstrim_gpio_keys[] = {
+ {
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .gpio = (GPIO_PORTC + 15),
+ .desc = "Default config",
+ .active_low = 0,
+ .wakeup = 1,
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_RECORD,
+ .gpio = (GPIO_PORTF + 14),
+ .desc = "Record",
+ .active_low = 0,
+ .wakeup = 1,
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_STOP,
+ .gpio = (GPIO_PORTF + 13),
+ .desc = "Stop",
+ .active_low = 0,
+ .wakeup = 1,
+ }
+};
+
+static struct gpio_keys_platform_data visstrim_gpio_keys_platform_data = {
+ .buttons = visstrim_gpio_keys,
+ .nbuttons = ARRAY_SIZE(visstrim_gpio_keys),
+};
+
+static struct platform_device visstrim_gpio_keys_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &visstrim_gpio_keys_platform_data,
+ },
+};
+
+/* Visstrim_SM10 has a microSD slot connected to sdhc1 */
+static int visstrim_m10_sdhc1_init(struct device *dev,
+ irq_handler_t detect_irq, void *data)
+{
+ int ret;
+
+ ret = request_irq(SDHC1_IRQ, detect_irq, IRQF_TRIGGER_FALLING,
+ "mmc-detect", data);
+ return ret;
+}
+
+static void visstrim_m10_sdhc1_exit(struct device *dev, void *data)
+{
+ free_irq(SDHC1_IRQ, data);
+}
+
+static struct imxmmc_platform_data visstrim_m10_sdhc_pdata = {
+ .init = visstrim_m10_sdhc1_init,
+ .exit = visstrim_m10_sdhc1_exit,
+};
+
+/* Visstrim_SM10 NOR flash */
+static struct physmap_flash_data visstrim_m10_flash_data = {
+ .width = 2,
+};
+
+static struct resource visstrim_m10_flash_resource = {
+ .start = 0xc0000000,
+ .end = 0xc0000000 + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device visstrim_m10_nor_mtd_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &visstrim_m10_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &visstrim_m10_flash_resource,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+ &visstrim_gpio_keys_device,
+ &visstrim_m10_nor_mtd_device,
+};
+
+/* Visstrim_M10 uses UART0 as console */
+static const struct imxuart_platform_data uart_pdata __initconst = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+/* I2C */
+static const struct imxi2c_platform_data visstrim_m10_i2c_data __initconst = {
+ .bitrate = 100000,
+};
+
+static struct pca953x_platform_data visstrim_m10_pca9555_pdata = {
+ .gpio_base = 240, /* After MX27 internal GPIOs */
+ .invert = 0,
+};
+
+static struct i2c_board_info visstrim_m10_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("pca9555", 0x20),
+ .platform_data = &visstrim_m10_pca9555_pdata,
+ },
+};
+
+/* USB OTG */
+static int otg_phy_init(struct platform_device *pdev)
+{
+ gpio_set_value(OTG_PHY_CS_GPIO, 0);
+ return 0;
+}
+
+static struct mxc_usbh_platform_data visstrim_m10_usbotg_pdata = {
+ .init = otg_phy_init,
+ .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
+ .flags = MXC_EHCI_POWER_PINS_ENABLED,
+};
+
+static void __init visstrim_m10_board_init(void)
+{
+ int ret;
+
+ ret = mxc_gpio_setup_multiple_pins(visstrim_m10_pins,
+ ARRAY_SIZE(visstrim_m10_pins), "VISSTRIM_M10");
+ if (ret)
+ pr_err("Failed to setup pins (%d)\n", ret);
+
+ imx27_add_imx_uart0(&uart_pdata);
+
+ i2c_register_board_info(0, visstrim_m10_i2c_devices,
+ ARRAY_SIZE(visstrim_m10_i2c_devices));
+ imx27_add_imx_i2c(0, &visstrim_m10_i2c_data);
+ imx27_add_imx_i2c(1, &visstrim_m10_i2c_data);
+ mxc_register_device(&mxc_sdhc_device0, &visstrim_m10_sdhc_pdata);
+ mxc_register_device(&mxc_otg_host, &visstrim_m10_usbotg_pdata);
+ imx27_add_fec(NULL);
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init visstrim_m10_timer_init(void)
+{
+ mx27_clocks_init((unsigned long)25000000);
+}
+
+static struct sys_timer visstrim_m10_timer = {
+ .init = visstrim_m10_timer_init,
+};
+
+MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10")
+ .phys_io = MX27_AIPI_BASE_ADDR,
+ .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = MX27_PHYS_OFFSET + 0x100,
+ .map_io = mx27_map_io,
+ .init_irq = mx27_init_irq,
+ .init_machine = visstrim_m10_board_init,
+ .timer = &visstrim_m10_timer,
+MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c
index 22a2b5d..60d4d0a 100644
--- a/arch/arm/mach-imx/mach-imx27lite.c
+++ b/arch/arm/mach-imx/mach-imx27lite.c
@@ -27,7 +27,7 @@
#include "devices-imx27.h"
#include "devices.h"
-static unsigned int mx27lite_pins[] = {
+static const int mx27lite_pins[] __initconst = {
/* UART1 */
PE12_PF_UART1_TXD,
PE13_PF_UART1_RXD,
@@ -58,16 +58,12 @@
.flags = IMXUART_HAVE_RTSCTS,
};
-static struct platform_device *platform_devices[] __initdata = {
- &mxc_fec_device,
-};
-
static void __init mx27lite_init(void)
{
mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins),
"imx27lite");
imx27_add_imx_uart0(&uart_pdata);
- platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+ imx27_add_fec(NULL);
}
static void __init mx27lite_timer_init(void)
diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c
index 77a760c..85e2877 100644
--- a/arch/arm/mach-imx/mach-mx1ads.c
+++ b/arch/arm/mach-imx/mach-mx1ads.c
@@ -32,7 +32,7 @@
#include "devices-imx1.h"
#include "devices.h"
-static int mx1ads_pins[] = {
+static const int mx1ads_pins[] __initconst = {
/* UART1 */
PC9_PF_UART1_CTS,
PC10_PF_UART1_RTS,
@@ -131,7 +131,7 @@
i2c_register_board_info(0, mx1ads_i2c_devices,
ARRAY_SIZE(mx1ads_i2c_devices));
- imx1_add_i2c_imx(&mx1ads_i2c_data);
+ imx1_add_imx_i2c(&mx1ads_i2c_data);
}
static void __init mx1ads_timer_init(void)
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index 96d7f81..7f021e6 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -67,7 +67,7 @@
#define MX21ADS_IO_LED4_ON 0x4000
#define MX21ADS_IO_LED3_ON 0x8000
-static unsigned int mx21ads_pins[] = {
+static const int mx21ads_pins[] __initconst = {
/* CS8900A */
(GPIO_PORTE | GPIO_GPIO | GPIO_IN | 11),
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index e66ffaa..a69dba2 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -33,7 +33,7 @@
#include "devices-imx27.h"
#include "devices.h"
-static unsigned int mx27pdk_pins[] = {
+static const int mx27pdk_pins[] __initconst = {
/* UART1 */
PE12_PF_UART1_TXD,
PE13_PF_UART1_RXD,
@@ -64,10 +64,6 @@
.flags = IMXUART_HAVE_RTSCTS,
};
-static struct platform_device *platform_devices[] __initdata = {
- &mxc_fec_device,
-};
-
/*
* Matrix keyboard
*/
@@ -94,7 +90,7 @@
mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
"mx27pdk");
imx27_add_imx_uart0(&uart_pdata);
- platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+ imx27_add_fec(NULL);
mxc_register_device(&imx_kpp_device, &mx27_3ds_keymap_data);
}
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index 9c77da9..ffb39a4 100644
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -66,7 +66,7 @@
/* to determine the correct external crystal reference */
#define CKIH_27MHZ_BIT_SET (1 << 3)
-static unsigned int mx27ads_pins[] = {
+static const int mx27ads_pins[] __initconst = {
/* UART0 */
PE12_PF_UART1_TXD,
PE13_PF_UART1_RXD,
@@ -284,7 +284,6 @@
static struct platform_device *platform_devices[] __initdata = {
&mx27ads_nor_mtd_device,
- &mxc_fec_device,
&mxc_w1_master_device,
};
@@ -308,11 +307,12 @@
/* only the i2c master 1 is used on this CPU card */
i2c_register_board_info(1, mx27ads_i2c_devices,
ARRAY_SIZE(mx27ads_i2c_devices));
- imx27_add_i2c_imx1(&mx27ads_i2c1_data);
+ imx27_add_imx_i2c(1, &mx27ads_i2c1_data);
mxc_register_device(&mxc_fb_device, &mx27ads_fb_data);
mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
mxc_register_device(&mxc_sdhc_device1, &sdhc2_pdata);
+ imx27_add_fec(NULL);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
}
diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
index a3a1e45..f4c397d 100644
--- a/arch/arm/mach-imx/mach-mxt_td60.c
+++ b/arch/arm/mach-imx/mach-mxt_td60.c
@@ -37,7 +37,7 @@
#include "devices-imx27.h"
#include "devices.h"
-static unsigned int mxt_td60_pins[] __initdata = {
+static const int mxt_td60_pins[] __initconst = {
/* UART0 */
PE12_PF_UART1_TXD,
PE13_PF_UART1_RXD,
@@ -231,10 +231,6 @@
.exit = mxt_td60_sdhc1_exit,
};
-static struct platform_device *platform_devices[] __initdata = {
- &mxc_fec_device,
-};
-
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
@@ -255,12 +251,11 @@
i2c_register_board_info(1, mxt_td60_i2c2_devices,
ARRAY_SIZE(mxt_td60_i2c2_devices));
- imx27_add_i2c_imx0(&mxt_td60_i2c0_data);
- imx27_add_i2c_imx1(&mxt_td60_i2c1_data);
+ imx27_add_imx_i2c(0, &mxt_td60_i2c0_data);
+ imx27_add_imx_i2c(1, &mxt_td60_i2c1_data);
mxc_register_device(&mxc_fb_device, &mxt_td60_fb_data);
mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
-
- platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+ imx27_add_fec(NULL);
}
static void __init mxt_td60_timer_init(void)
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index 23c9e1f..223c31c 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -38,7 +38,6 @@
#include <mach/iomux-mx27.h>
#include <asm/mach/time.h>
#include <mach/audmux.h>
-#include <mach/ssi.h>
#include <mach/mxc_nand.h>
#include <mach/irqs.h>
#include <mach/mmc.h>
@@ -55,7 +54,7 @@
#define SPI1_SS1 (GPIO_PORTD + 27)
#define SD2_CD (GPIO_PORTC + 29)
-static int pca100_pins[] = {
+static const int pca100_pins[] __initconst = {
/* UART1 */
PE12_PF_UART1_TXD,
PE13_PF_UART1_RXD,
@@ -174,7 +173,6 @@
static struct platform_device *platform_devices[] __initdata = {
&mxc_w1_master_device,
- &mxc_fec_device,
&mxc_wdt,
};
@@ -193,11 +191,9 @@
I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
.platform_data = &board_eeprom,
}, {
- I2C_BOARD_INFO("rtc-pcf8563", 0x51),
- .type = "pcf8563"
+ I2C_BOARD_INFO("pcf8563", 0x51),
}, {
I2C_BOARD_INFO("lm75", 0x4a),
- .type = "lm75"
}
};
@@ -252,7 +248,7 @@
msleep(2);
}
-static struct imx_ssi_platform_data pca100_ssi_pdata = {
+static const struct imx_ssi_platform_data pca100_ssi_pdata __initconst = {
.ac97_reset = pca100_ac97_cold_reset,
.ac97_warm_reset = pca100_ac97_warm_reset,
.flags = IMX_SSI_USE_AC97,
@@ -389,7 +385,7 @@
if (ret)
printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
- mxc_register_device(&imx_ssi_device0, &pca100_ssi_pdata);
+ imx27_add_imx_ssi(0, &pca100_ssi_pdata);
imx27_add_imx_uart0(&uart_pdata);
@@ -401,7 +397,7 @@
i2c_register_board_info(1, pca100_i2c_devices,
ARRAY_SIZE(pca100_i2c_devices));
- imx27_add_i2c_imx1(&pca100_i2c1_data);
+ imx27_add_imx_i2c(1, &pca100_i2c1_data);
#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_IN);
@@ -436,6 +432,7 @@
mxc_register_device(&mxc_fb_device, &pca100_fb_data);
+ imx27_add_fec(NULL);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
}
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index 9212e8f..b9888a8 100644
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -43,7 +43,7 @@
#include "devices-imx27.h"
#include "devices.h"
-static int pcm038_pins[] = {
+static const int pcm038_pins[] __initconst = {
/* UART1 */
PE12_PF_UART1_TXD,
PE13_PF_UART1_RXD,
@@ -173,7 +173,6 @@
static struct platform_device *platform_devices[] __initdata = {
&pcm038_nor_mtd_device,
&mxc_w1_master_device,
- &mxc_fec_device,
&pcm038_sram_mtd_device,
&mxc_wdt,
};
@@ -257,7 +256,7 @@
.consumer_supplies = cam_consumers,
};
-struct mc13783_regulator_init_data pcm038_regulators[] = {
+static struct mc13783_regulator_init_data pcm038_regulators[] = {
{
.id = MC13783_REGU_VCAM,
.init_data = &cam_data,
@@ -309,7 +308,7 @@
i2c_register_board_info(1, pcm038_i2c_devices,
ARRAY_SIZE(pcm038_i2c_devices));
- imx27_add_i2c_imx1(&pcm038_i2c1_data);
+ imx27_add_imx_i2c(1, &pcm038_i2c1_data);
/* PE18 for user-LED D40 */
mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT);
@@ -325,6 +324,7 @@
mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+ imx27_add_fec(NULL);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
#ifdef CONFIG_MACH_PCM970_BASEBOARD
diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c
index 88bf0d1..fb2e5f3 100644
--- a/arch/arm/mach-imx/mach-scb9328.c
+++ b/arch/arm/mach-imx/mach-scb9328.c
@@ -95,7 +95,7 @@
}
};
-static int mxc_uart1_pins[] = {
+static const int mxc_uart1_pins[] = {
PC9_PF_UART1_CTS,
PC10_PF_UART1_RTS,
PC11_PF_UART1_TXD,
diff --git a/arch/arm/mach-imx/pcm970-baseboard.c b/arch/arm/mach-imx/pcm970-baseboard.c
index f490a40..9110d9c 100644
--- a/arch/arm/mach-imx/pcm970-baseboard.c
+++ b/arch/arm/mach-imx/pcm970-baseboard.c
@@ -31,7 +31,7 @@
#include "devices.h"
-static int pcm970_pins[] = {
+static const int pcm970_pins[] __initconst = {
/* SDHC */
PB4_PF_SD2_D0,
PB5_PF_SD2_D1,
@@ -200,7 +200,7 @@
},
};
-struct sja1000_platform_data pcm970_sja1000_platform_data = {
+static struct sja1000_platform_data pcm970_sja1000_platform_data = {
.osc_freq = 16000000,
.ocr = OCR_TX1_PULLDOWN | OCR_TX0_PUSHPULL,
.cdr = CDR_CBP,
diff --git a/arch/arm/mach-integrator/include/mach/vmalloc.h b/arch/arm/mach-integrator/include/mach/vmalloc.h
index e87ab0b..e056e7c 100644
--- a/arch/arm/mach-integrator/include/mach/vmalloc.h
+++ b/arch/arm/mach-integrator/include/mach/vmalloc.h
@@ -17,4 +17,4 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
+#define VMALLOC_END 0xd0000000
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index cc25501..3410633 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -58,6 +58,12 @@
QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS
devices.
+config MACH_DOCKSTAR
+ bool "Seagate FreeAgent DockStar"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Seagate FreeAgent DockStar.
+
config MACH_OPENRD
bool
@@ -100,6 +106,12 @@
Say 'Y' here if you want your kernel to support the
LaCie Network Space Max v2 NAS.
+config MACH_D2NET_V2
+ bool "LaCie d2 Network v2 NAS Board"
+ help
+ Say 'Y' here if you want your kernel to support the
+ LaCie d2 Network v2 NAS.
+
config MACH_NET2BIG_V2
bool "LaCie 2Big Network v2 NAS Board"
help
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index 295d7ba..5dcaa81 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -7,14 +7,16 @@
obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o
obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG) += sheevaplug-setup.o
obj-$(CONFIG_MACH_GURUPLUG) += guruplug-setup.o
+obj-$(CONFIG_MACH_DOCKSTAR) += dockstar-setup.o
obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o
obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o
obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o
-obj-$(CONFIG_MACH_NETSPACE_V2) += netspace_v2-setup.o
-obj-$(CONFIG_MACH_INETSPACE_V2) += netspace_v2-setup.o
-obj-$(CONFIG_MACH_NETSPACE_MAX_V2) += netspace_v2-setup.o
-obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o
-obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o
+obj-$(CONFIG_MACH_NETSPACE_V2) += netspace_v2-setup.o lacie_v2-common.o
+obj-$(CONFIG_MACH_INETSPACE_V2) += netspace_v2-setup.o lacie_v2-common.o
+obj-$(CONFIG_MACH_NETSPACE_MAX_V2) += netspace_v2-setup.o lacie_v2-common.o
+obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2-setup.o lacie_v2-common.o
+obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
+obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
obj-$(CONFIG_MACH_T5325) += t5325-setup.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
diff --git a/arch/arm/mach-kirkwood/d2net_v2-setup.c b/arch/arm/mach-kirkwood/d2net_v2-setup.c
new file mode 100644
index 0000000..cd62d0f
--- /dev/null
+++ b/arch/arm/mach-kirkwood/d2net_v2-setup.c
@@ -0,0 +1,231 @@
+/*
+ * arch/arm/mach-kirkwood/d2net_v2-setup.c
+ *
+ * LaCie d2 Network Space v2 Board Setup
+ *
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <mach/leds-ns2.h>
+#include "common.h"
+#include "mpp.h"
+#include "lacie_v2-common.h"
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data d2net_v2_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+
+static struct mv_sata_platform_data d2net_v2_sata_data = {
+ .n_ports = 2,
+};
+
+/*****************************************************************************
+ * GPIO keys
+ ****************************************************************************/
+
+#define D2NET_V2_GPIO_PUSH_BUTTON 34
+#define D2NET_V2_GPIO_POWER_SWITCH_ON 13
+#define D2NET_V2_GPIO_POWER_SWITCH_OFF 15
+
+#define D2NET_V2_SWITCH_POWER_ON 0x1
+#define D2NET_V2_SWITCH_POWER_OFF 0x2
+
+static struct gpio_keys_button d2net_v2_buttons[] = {
+ [0] = {
+ .type = EV_SW,
+ .code = D2NET_V2_SWITCH_POWER_ON,
+ .gpio = D2NET_V2_GPIO_POWER_SWITCH_ON,
+ .desc = "Back power switch (on|auto)",
+ .active_low = 0,
+ },
+ [1] = {
+ .type = EV_SW,
+ .code = D2NET_V2_SWITCH_POWER_OFF,
+ .gpio = D2NET_V2_GPIO_POWER_SWITCH_OFF,
+ .desc = "Back power switch (auto|off)",
+ .active_low = 0,
+ },
+ [2] = {
+ .code = KEY_POWER,
+ .gpio = D2NET_V2_GPIO_PUSH_BUTTON,
+ .desc = "Front Push Button",
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_platform_data d2net_v2_button_data = {
+ .buttons = d2net_v2_buttons,
+ .nbuttons = ARRAY_SIZE(d2net_v2_buttons),
+};
+
+static struct platform_device d2net_v2_gpio_buttons = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &d2net_v2_button_data,
+ },
+};
+
+/*****************************************************************************
+ * GPIO LEDs
+ ****************************************************************************/
+
+#define D2NET_V2_GPIO_RED_LED 12
+
+static struct gpio_led d2net_v2_gpio_led_pins[] = {
+ {
+ .name = "d2net_v2:red:fail",
+ .gpio = D2NET_V2_GPIO_RED_LED,
+ },
+};
+
+static struct gpio_led_platform_data d2net_v2_gpio_leds_data = {
+ .num_leds = ARRAY_SIZE(d2net_v2_gpio_led_pins),
+ .leds = d2net_v2_gpio_led_pins,
+};
+
+static struct platform_device d2net_v2_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &d2net_v2_gpio_leds_data,
+ },
+};
+
+/*****************************************************************************
+ * Dual-GPIO CPLD LEDs
+ ****************************************************************************/
+
+#define D2NET_V2_GPIO_BLUE_LED_SLOW 29
+#define D2NET_V2_GPIO_BLUE_LED_CMD 30
+
+static struct ns2_led d2net_v2_led_pins[] = {
+ {
+ .name = "d2net_v2:blue:sata",
+ .cmd = D2NET_V2_GPIO_BLUE_LED_CMD,
+ .slow = D2NET_V2_GPIO_BLUE_LED_SLOW,
+ },
+};
+
+static struct ns2_led_platform_data d2net_v2_leds_data = {
+ .num_leds = ARRAY_SIZE(d2net_v2_led_pins),
+ .leds = d2net_v2_led_pins,
+};
+
+static struct platform_device d2net_v2_leds = {
+ .name = "leds-ns2",
+ .id = -1,
+ .dev = {
+ .platform_data = &d2net_v2_leds_data,
+ },
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+static unsigned int d2net_v2_mpp_config[] __initdata = {
+ MPP0_SPI_SCn,
+ MPP1_SPI_MOSI,
+ MPP2_SPI_SCK,
+ MPP3_SPI_MISO,
+ MPP6_SYSRST_OUTn,
+ MPP7_GPO, /* Request power-off */
+ MPP8_TW0_SDA,
+ MPP9_TW0_SCK,
+ MPP10_UART0_TXD,
+ MPP11_UART0_RXD,
+ MPP12_GPO, /* Red led */
+ MPP13_GPIO, /* Rear power switch (on|auto) */
+ MPP14_GPIO, /* USB fuse */
+ MPP15_GPIO, /* Rear power switch (auto|off) */
+ MPP16_GPIO, /* SATA 0 power */
+ MPP21_SATA0_ACTn,
+ MPP24_GPIO, /* USB mode select */
+ MPP26_GPIO, /* USB device vbus */
+ MPP28_GPIO, /* USB enable host vbus */
+ MPP29_GPIO, /* Blue led (slow register) */
+ MPP30_GPIO, /* Blue led (command register) */
+ MPP34_GPIO, /* Power button (1 = Released, 0 = Pushed) */
+ MPP35_GPIO, /* Inhibit power-off */
+ 0
+};
+
+#define D2NET_V2_GPIO_POWER_OFF 7
+
+static void d2net_v2_power_off(void)
+{
+ gpio_set_value(D2NET_V2_GPIO_POWER_OFF, 1);
+}
+
+static void __init d2net_v2_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+ kirkwood_mpp_conf(d2net_v2_mpp_config);
+
+ lacie_v2_hdd_power_init(1);
+
+ kirkwood_ehci_init();
+ kirkwood_ge00_init(&d2net_v2_ge00_data);
+ kirkwood_sata_init(&d2net_v2_sata_data);
+ kirkwood_uart0_init();
+ lacie_v2_register_flash();
+ lacie_v2_register_i2c_devices();
+
+ platform_device_register(&d2net_v2_leds);
+ platform_device_register(&d2net_v2_gpio_leds);
+ platform_device_register(&d2net_v2_gpio_buttons);
+
+ if (gpio_request(D2NET_V2_GPIO_POWER_OFF, "power-off") == 0 &&
+ gpio_direction_output(D2NET_V2_GPIO_POWER_OFF, 0) == 0)
+ pm_power_off = d2net_v2_power_off;
+ else
+ pr_err("d2net_v2: failed to configure power-off GPIO\n");
+}
+
+MACHINE_START(D2NET_V2, "LaCie d2 Network v2")
+ .phys_io = KIRKWOOD_REGS_PHYS_BASE,
+ .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .init_machine = d2net_v2_init,
+ .map_io = kirkwood_map_io,
+ .init_irq = kirkwood_init_irq,
+ .timer = &lacie_v2_timer,
+MACHINE_END
diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c
new file mode 100644
index 0000000..a90475d
--- /dev/null
+++ b/arch/arm/mach-kirkwood/dockstar-setup.c
@@ -0,0 +1,112 @@
+/*
+ * arch/arm/mach-kirkwood/dockstar-setup.c
+ *
+ * Seagate FreeAgent DockStar Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <plat/mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition dockstar_nand_parts[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = SZ_1M
+ }, {
+ .name = "uImage",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_4M
+ }, {
+ .name = "root",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL
+ },
+};
+
+static struct mv643xx_eth_platform_data dockstar_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct gpio_led dockstar_led_pins[] = {
+ {
+ .name = "dockstar:green:health",
+ .default_trigger = "default-on",
+ .gpio = 46,
+ .active_low = 1,
+ },
+ {
+ .name = "dockstar:orange:misc",
+ .default_trigger = "none",
+ .gpio = 47,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data dockstar_led_data = {
+ .leds = dockstar_led_pins,
+ .num_leds = ARRAY_SIZE(dockstar_led_pins),
+};
+
+static struct platform_device dockstar_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &dockstar_led_data,
+ }
+};
+
+static unsigned int dockstar_mpp_config[] __initdata = {
+ MPP29_GPIO, /* USB Power Enable */
+ MPP46_GPIO, /* LED green */
+ MPP47_GPIO, /* LED orange */
+ 0
+};
+
+static void __init dockstar_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+
+ /* setup gpio pin select */
+ kirkwood_mpp_conf(dockstar_mpp_config);
+
+ kirkwood_uart0_init();
+ kirkwood_nand_init(ARRAY_AND_SIZE(dockstar_nand_parts), 25);
+
+ if (gpio_request(29, "USB Power Enable") != 0 ||
+ gpio_direction_output(29, 1) != 0)
+ printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n");
+ kirkwood_ehci_init();
+
+ kirkwood_ge00_init(&dockstar_ge00_data);
+
+ platform_device_register(&dockstar_leds);
+}
+
+MACHINE_START(DOCKSTAR, "Seagate FreeAgent DockStar")
+ .phys_io = KIRKWOOD_REGS_PHYS_BASE,
+ .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .init_machine = dockstar_init,
+ .map_io = kirkwood_map_io,
+ .init_irq = kirkwood_init_irq,
+ .timer = &kirkwood_timer,
+MACHINE_END
diff --git a/arch/arm/mach-kirkwood/include/mach/leds-netxbig.h b/arch/arm/mach-kirkwood/include/mach/leds-netxbig.h
new file mode 100644
index 0000000..24b536e
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/leds-netxbig.h
@@ -0,0 +1,55 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/leds-netxbig.h
+ *
+ * Platform data structure for netxbig LED driver
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_LEDS_NETXBIG_H
+#define __MACH_LEDS_NETXBIG_H
+
+struct netxbig_gpio_ext {
+ unsigned *addr;
+ int num_addr;
+ unsigned *data;
+ int num_data;
+ unsigned enable;
+};
+
+enum netxbig_led_mode {
+ NETXBIG_LED_OFF,
+ NETXBIG_LED_ON,
+ NETXBIG_LED_SATA,
+ NETXBIG_LED_TIMER1,
+ NETXBIG_LED_TIMER2,
+ NETXBIG_LED_MODE_NUM,
+};
+
+#define NETXBIG_LED_INVALID_MODE NETXBIG_LED_MODE_NUM
+
+struct netxbig_led_timer {
+ unsigned long delay_on;
+ unsigned long delay_off;
+ enum netxbig_led_mode mode;
+};
+
+struct netxbig_led {
+ const char *name;
+ const char *default_trigger;
+ int mode_addr;
+ int *mode_val;
+ int bright_addr;
+};
+
+struct netxbig_led_platform_data {
+ struct netxbig_gpio_ext *gpio_ext;
+ struct netxbig_led_timer *timer;
+ int num_timer;
+ struct netxbig_led *leds;
+ int num_leds;
+};
+
+#endif /* __MACH_LEDS_NETXBIG_H */
diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.c b/arch/arm/mach-kirkwood/lacie_v2-common.c
new file mode 100644
index 0000000..d3ea1b6
--- /dev/null
+++ b/arch/arm/mach-kirkwood/lacie_v2-common.c
@@ -0,0 +1,127 @@
+/*
+ * arch/arm/mach-kirkwood/lacie_v2-common.c
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/gpio.h>
+#include <asm/mach/time.h>
+#include <mach/kirkwood.h>
+#include <mach/irqs.h>
+#include <plat/time.h>
+#include "common.h"
+
+/*****************************************************************************
+ * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005)
+ ****************************************************************************/
+
+static struct mtd_partition lacie_v2_flash_parts[] = {
+ {
+ .name = "u-boot",
+ .size = MTDPART_SIZ_FULL,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+};
+
+static const struct flash_platform_data lacie_v2_flash = {
+ .type = "mx25l4005a",
+ .name = "spi_flash",
+ .parts = lacie_v2_flash_parts,
+ .nr_parts = ARRAY_SIZE(lacie_v2_flash_parts),
+};
+
+static struct spi_board_info __initdata lacie_v2_spi_slave_info[] = {
+ {
+ .modalias = "m25p80",
+ .platform_data = &lacie_v2_flash,
+ .irq = -1,
+ .max_speed_hz = 20000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ },
+};
+
+void __init lacie_v2_register_flash(void)
+{
+ spi_register_board_info(lacie_v2_spi_slave_info,
+ ARRAY_SIZE(lacie_v2_spi_slave_info));
+ kirkwood_spi_init();
+}
+
+/*****************************************************************************
+ * I2C devices
+ ****************************************************************************/
+
+static struct at24_platform_data at24c04 = {
+ .byte_len = SZ_4K / 8,
+ .page_size = 16,
+};
+
+/*
+ * i2c addr | chip | description
+ * 0x50 | HT24LC04 | eeprom (512B)
+ */
+
+static struct i2c_board_info __initdata lacie_v2_i2c_info[] = {
+ {
+ I2C_BOARD_INFO("24c04", 0x50),
+ .platform_data = &at24c04,
+ }
+};
+
+void __init lacie_v2_register_i2c_devices(void)
+{
+ kirkwood_i2c_init();
+ i2c_register_board_info(0, lacie_v2_i2c_info,
+ ARRAY_SIZE(lacie_v2_i2c_info));
+}
+
+/*****************************************************************************
+ * Hard Disk power
+ ****************************************************************************/
+
+static int __initdata lacie_v2_gpio_hdd_power[] = { 16, 17, 41, 42, 43 };
+
+void __init lacie_v2_hdd_power_init(int hdd_num)
+{
+ int i;
+ int err;
+
+ /* Power up all hard disks. */
+ for (i = 0; i < hdd_num; i++) {
+ err = gpio_request(lacie_v2_gpio_hdd_power[i], NULL);
+ if (err == 0) {
+ err = gpio_direction_output(
+ lacie_v2_gpio_hdd_power[i], 1);
+ /* Free the HDD power GPIOs. This allow user-space to
+ * configure them via the gpiolib sysfs interface. */
+ gpio_free(lacie_v2_gpio_hdd_power[i]);
+ }
+ if (err)
+ pr_err("Failed to power up HDD%d\n", i + 1);
+ }
+}
+
+/*****************************************************************************
+ * Timer
+ ****************************************************************************/
+
+static void lacie_v2_timer_init(void)
+{
+ kirkwood_tclk = 166666667;
+ orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
+}
+
+struct sys_timer lacie_v2_timer = {
+ .init = lacie_v2_timer_init,
+};
diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.h b/arch/arm/mach-kirkwood/lacie_v2-common.h
new file mode 100644
index 0000000..af52131
--- /dev/null
+++ b/arch/arm/mach-kirkwood/lacie_v2-common.h
@@ -0,0 +1,18 @@
+/*
+ * arch/arm/mach-kirkwood/lacie_v2-common.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ARCH_KIRKWOOD_LACIE_V2_COMMON_H
+#define __ARCH_KIRKWOOD_LACIE_V2_COMMON_H
+
+void lacie_v2_register_flash(void);
+void lacie_v2_register_i2c_devices(void);
+void lacie_v2_hdd_power_init(int hdd_num);
+
+extern struct sys_timer lacie_v2_timer;
+
+#endif
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
index d26bf32..fed264d 100644
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -24,56 +24,19 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
#include <linux/input.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/leds.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
#include <mach/kirkwood.h>
#include <mach/leds-ns2.h>
-#include <plat/time.h>
#include "common.h"
#include "mpp.h"
-
-/*****************************************************************************
- * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005)
- ****************************************************************************/
-
-static struct mtd_partition netspace_v2_flash_parts[] = {
- {
- .name = "u-boot",
- .size = MTDPART_SIZ_FULL,
- .offset = 0,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
-};
-
-static const struct flash_platform_data netspace_v2_flash = {
- .type = "mx25l4005a",
- .name = "spi_flash",
- .parts = netspace_v2_flash_parts,
- .nr_parts = ARRAY_SIZE(netspace_v2_flash_parts),
-};
-
-static struct spi_board_info __initdata netspace_v2_spi_slave_info[] = {
- {
- .modalias = "m25p80",
- .platform_data = &netspace_v2_flash,
- .irq = -1,
- .max_speed_hz = 20000000,
- .bus_num = 0,
- .chip_select = 0,
- },
-};
+#include "lacie_v2-common.h"
/*****************************************************************************
* Ethernet
@@ -84,27 +47,6 @@
};
/*****************************************************************************
- * I2C devices
- ****************************************************************************/
-
-static struct at24_platform_data at24c04 = {
- .byte_len = SZ_4K / 8,
- .page_size = 16,
-};
-
-/*
- * i2c addr | chip | description
- * 0x50 | HT24LC04 | eeprom (512B)
- */
-
-static struct i2c_board_info __initdata netspace_v2_i2c_info[] = {
- {
- I2C_BOARD_INFO("24c04", 0x50),
- .platform_data = &at24c04,
- }
-};
-
-/*****************************************************************************
* SATA
****************************************************************************/
@@ -112,35 +54,6 @@
.n_ports = 2,
};
-#define NETSPACE_V2_GPIO_SATA0_POWER 16
-#define NETSPACE_V2_GPIO_SATA1_POWER 17
-
-static void __init netspace_v2_sata_power_init(void)
-{
- int err;
-
- err = gpio_request(NETSPACE_V2_GPIO_SATA0_POWER, "SATA0 power");
- if (err == 0) {
- err = gpio_direction_output(NETSPACE_V2_GPIO_SATA0_POWER, 1);
- if (err)
- gpio_free(NETSPACE_V2_GPIO_SATA0_POWER);
- }
- if (err)
- pr_err("netspace_v2: failed to setup SATA0 power\n");
-
- if (machine_is_netspace_max_v2()) {
- err = gpio_request(NETSPACE_V2_GPIO_SATA1_POWER, "SATA1 power");
- if (err == 0) {
- err = gpio_direction_output(
- NETSPACE_V2_GPIO_SATA1_POWER, 1);
- if (err)
- gpio_free(NETSPACE_V2_GPIO_SATA1_POWER);
- }
- if (err)
- pr_err("netspace_v2: failed to setup SATA1 power\n");
- }
-}
-
/*****************************************************************************
* GPIO keys
****************************************************************************/
@@ -224,20 +137,6 @@
};
/*****************************************************************************
- * Timer
- ****************************************************************************/
-
-static void netspace_v2_timer_init(void)
-{
- kirkwood_tclk = 166666667;
- orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
-}
-
-struct sys_timer netspace_v2_timer = {
- .init = netspace_v2_timer_init,
-};
-
-/*****************************************************************************
* General Setup
****************************************************************************/
@@ -291,18 +190,17 @@
kirkwood_init();
kirkwood_mpp_conf(netspace_v2_mpp_config);
- netspace_v2_sata_power_init();
+ if (machine_is_netspace_max_v2())
+ lacie_v2_hdd_power_init(2);
+ else
+ lacie_v2_hdd_power_init(1);
kirkwood_ehci_init();
kirkwood_ge00_init(&netspace_v2_ge00_data);
kirkwood_sata_init(&netspace_v2_sata_data);
kirkwood_uart0_init();
- spi_register_board_info(netspace_v2_spi_slave_info,
- ARRAY_SIZE(netspace_v2_spi_slave_info));
- kirkwood_spi_init();
- kirkwood_i2c_init();
- i2c_register_board_info(0, netspace_v2_i2c_info,
- ARRAY_SIZE(netspace_v2_i2c_info));
+ lacie_v2_register_flash();
+ lacie_v2_register_i2c_devices();
platform_device_register(&netspace_v2_leds);
platform_device_register(&netspace_v2_gpio_leds);
@@ -323,7 +221,7 @@
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
- .timer = &netspace_v2_timer,
+ .timer = &lacie_v2_timer,
MACHINE_END
#endif
@@ -335,7 +233,7 @@
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
- .timer = &netspace_v2_timer,
+ .timer = &lacie_v2_timer,
MACHINE_END
#endif
@@ -347,6 +245,6 @@
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
- .timer = &netspace_v2_timer,
+ .timer = &lacie_v2_timer,
MACHINE_END
#endif
diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
index 2bd14c5..d970e1e 100644
--- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
@@ -23,55 +23,19 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
#include <linux/input.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/leds.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
#include <mach/kirkwood.h>
-#include <plat/time.h>
+#include <mach/leds-netxbig.h>
#include "common.h"
#include "mpp.h"
-
-/*****************************************************************************
- * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005)
- ****************************************************************************/
-
-static struct mtd_partition netxbig_v2_flash_parts[] = {
- {
- .name = "u-boot",
- .size = MTDPART_SIZ_FULL,
- .offset = 0,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
-};
-
-static const struct flash_platform_data netxbig_v2_flash = {
- .type = "mx25l4005a",
- .name = "spi_flash",
- .parts = netxbig_v2_flash_parts,
- .nr_parts = ARRAY_SIZE(netxbig_v2_flash_parts),
-};
-
-static struct spi_board_info __initdata netxbig_v2_spi_slave_info[] = {
- {
- .modalias = "m25p80",
- .platform_data = &netxbig_v2_flash,
- .irq = -1,
- .max_speed_hz = 20000000,
- .bus_num = 0,
- .chip_select = 0,
- },
-};
+#include "lacie_v2-common.h"
/*****************************************************************************
* Ethernet
@@ -86,27 +50,6 @@
};
/*****************************************************************************
- * I2C devices
- ****************************************************************************/
-
-static struct at24_platform_data at24c04 = {
- .byte_len = SZ_4K / 8,
- .page_size = 16,
-};
-
-/*
- * i2c addr | chip | description
- * 0x50 | HT24LC04 | eeprom (512B)
- */
-
-static struct i2c_board_info __initdata netxbig_v2_i2c_info[] = {
- {
- I2C_BOARD_INFO("24c04", 0x50),
- .platform_data = &at24c04,
- }
-};
-
-/*****************************************************************************
* SATA
****************************************************************************/
@@ -114,34 +57,6 @@
.n_ports = 2,
};
-static int __initdata netxbig_v2_gpio_hdd_power[] = { 16, 17, 41, 42, 43 };
-
-static void __init netxbig_v2_sata_power_init(void)
-{
- int i;
- int err;
- int hdd_nb;
-
- if (machine_is_net2big_v2())
- hdd_nb = 2;
- else
- hdd_nb = 5;
-
- /* Power up all hard disks. */
- for (i = 0; i < hdd_nb; i++) {
- err = gpio_request(netxbig_v2_gpio_hdd_power[i], NULL);
- if (err == 0) {
- err = gpio_direction_output(
- netxbig_v2_gpio_hdd_power[i], 1);
- /* Free the HDD power GPIOs. This allow user-space to
- * configure them via the gpiolib sysfs interface. */
- gpio_free(netxbig_v2_gpio_hdd_power[i]);
- }
- if (err)
- pr_err("netxbig_v2: failed to power up HDD%d\n", i + 1);
- }
-}
-
/*****************************************************************************
* GPIO keys
****************************************************************************/
@@ -190,7 +105,7 @@
};
/*****************************************************************************
- * GPIO LEDs
+ * GPIO extension LEDs
****************************************************************************/
/*
@@ -200,19 +115,32 @@
* - address register : bit [0-2] -> GPIO [47-49]
* - data register : bit [0-2] -> GPIO [44-46]
* - enable register : GPIO 29
- *
+ */
+
+static int netxbig_v2_gpio_ext_addr[] = { 47, 48, 49 };
+static int netxbig_v2_gpio_ext_data[] = { 44, 45, 46 };
+
+static struct netxbig_gpio_ext netxbig_v2_gpio_ext = {
+ .addr = netxbig_v2_gpio_ext_addr,
+ .num_addr = ARRAY_SIZE(netxbig_v2_gpio_ext_addr),
+ .data = netxbig_v2_gpio_ext_data,
+ .num_data = ARRAY_SIZE(netxbig_v2_gpio_ext_data),
+ .enable = 29,
+};
+
+/*
* Address register selection:
*
* addr | register
* ----------------------------
* 0 | front LED
* 1 | front LED brightness
- * 2 | HDD LED brightness
- * 3 | HDD1 LED
- * 4 | HDD2 LED
- * 5 | HDD3 LED
- * 6 | HDD4 LED
- * 7 | HDD5 LED
+ * 2 | SATA LED brightness
+ * 3 | SATA0 LED
+ * 4 | SATA1 LED
+ * 5 | SATA2 LED
+ * 6 | SATA3 LED
+ * 7 | SATA4 LED
*
* Data register configuration:
*
@@ -233,30 +161,107 @@
* 6 | blink blue on=1 sec and red on=1 sec
* 7 | blink blue on=0.5 sec and blue off=2.5 sec
*
- * data | HDD LED mode
+ * data | SATA LED mode
* -------------------------------------------------
- * 0 | fix blue on
+ * 0 | fix off
* 1 | SATA activity blink
* 2 | fix red on
* 3 | blink blue on=1 sec and blue off=1 sec
* 4 | blink red on=1 sec and red off=1 sec
* 5 | blink blue on=2.5 sec and red on=0.5 sec
* 6 | blink blue on=1 sec and red on=1 sec
- * 7 | blink blue on=0.5 sec and blue off=2.5 sec
+ * 7 | fix blue on
*/
-/*****************************************************************************
- * Timer
- ****************************************************************************/
+static int netxbig_v2_red_mled[NETXBIG_LED_MODE_NUM] = {
+ [NETXBIG_LED_OFF] = 0,
+ [NETXBIG_LED_ON] = 2,
+ [NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE,
+ [NETXBIG_LED_TIMER1] = 4,
+ [NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE,
+};
-static void netxbig_v2_timer_init(void)
-{
- kirkwood_tclk = 166666667;
- orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
-}
+static int netxbig_v2_blue_pwr_mled[NETXBIG_LED_MODE_NUM] = {
+ [NETXBIG_LED_OFF] = 0,
+ [NETXBIG_LED_ON] = 1,
+ [NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE,
+ [NETXBIG_LED_TIMER1] = 3,
+ [NETXBIG_LED_TIMER2] = 7,
+};
-struct sys_timer netxbig_v2_timer = {
- .init = netxbig_v2_timer_init,
+static int netxbig_v2_blue_sata_mled[NETXBIG_LED_MODE_NUM] = {
+ [NETXBIG_LED_OFF] = 0,
+ [NETXBIG_LED_ON] = 7,
+ [NETXBIG_LED_SATA] = 1,
+ [NETXBIG_LED_TIMER1] = 3,
+ [NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE,
+};
+
+static struct netxbig_led_timer netxbig_v2_led_timer[] = {
+ [0] = {
+ .delay_on = 500,
+ .delay_off = 500,
+ .mode = NETXBIG_LED_TIMER1,
+ },
+ [1] = {
+ .delay_on = 500,
+ .delay_off = 1000,
+ .mode = NETXBIG_LED_TIMER2,
+ },
+};
+
+#define NETXBIG_LED(_name, maddr, mval, baddr) \
+ { .name = _name, \
+ .mode_addr = maddr, \
+ .mode_val = mval, \
+ .bright_addr = baddr }
+
+static struct netxbig_led net2big_v2_leds_ctrl[] = {
+ NETXBIG_LED("net2big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1),
+ NETXBIG_LED("net2big-v2:red:power", 0, netxbig_v2_red_mled, 1),
+ NETXBIG_LED("net2big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2),
+ NETXBIG_LED("net2big-v2:red:sata0", 3, netxbig_v2_red_mled, 2),
+ NETXBIG_LED("net2big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2),
+ NETXBIG_LED("net2big-v2:red:sata1", 4, netxbig_v2_red_mled, 2),
+};
+
+static struct netxbig_led_platform_data net2big_v2_leds_data = {
+ .gpio_ext = &netxbig_v2_gpio_ext,
+ .timer = netxbig_v2_led_timer,
+ .num_timer = ARRAY_SIZE(netxbig_v2_led_timer),
+ .leds = net2big_v2_leds_ctrl,
+ .num_leds = ARRAY_SIZE(net2big_v2_leds_ctrl),
+};
+
+static struct netxbig_led net5big_v2_leds_ctrl[] = {
+ NETXBIG_LED("net5big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1),
+ NETXBIG_LED("net5big-v2:red:power", 0, netxbig_v2_red_mled, 1),
+ NETXBIG_LED("net5big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2),
+ NETXBIG_LED("net5big-v2:red:sata0", 3, netxbig_v2_red_mled, 2),
+ NETXBIG_LED("net5big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2),
+ NETXBIG_LED("net5big-v2:red:sata1", 4, netxbig_v2_red_mled, 2),
+ NETXBIG_LED("net5big-v2:blue:sata2", 5, netxbig_v2_blue_sata_mled, 2),
+ NETXBIG_LED("net5big-v2:red:sata2", 5, netxbig_v2_red_mled, 2),
+ NETXBIG_LED("net5big-v2:blue:sata3", 6, netxbig_v2_blue_sata_mled, 2),
+ NETXBIG_LED("net5big-v2:red:sata3", 6, netxbig_v2_red_mled, 2),
+ NETXBIG_LED("net5big-v2:blue:sata4", 7, netxbig_v2_blue_sata_mled, 2),
+ NETXBIG_LED("net5big-v2:red:sata5", 7, netxbig_v2_red_mled, 2),
+};
+
+static struct netxbig_led_platform_data net5big_v2_leds_data = {
+ .gpio_ext = &netxbig_v2_gpio_ext,
+ .timer = netxbig_v2_led_timer,
+ .num_timer = ARRAY_SIZE(netxbig_v2_led_timer),
+ .leds = net5big_v2_leds_ctrl,
+ .num_leds = ARRAY_SIZE(net5big_v2_leds_ctrl),
+};
+
+static struct platform_device netxbig_v2_leds = {
+ .name = "leds-netxbig",
+ .id = -1,
+ .dev = {
+ .platform_data = &net2big_v2_leds_data,
+ },
};
/*****************************************************************************
@@ -284,18 +289,18 @@
MPP24_GPIO, /* USB mode select */
MPP26_GPIO, /* USB device vbus */
MPP28_GPIO, /* USB enable host vbus */
- MPP29_GPIO, /* CPLD extension ALE */
+ MPP29_GPIO, /* GPIO extension ALE */
MPP34_GPIO, /* Rear Push button */
MPP35_GPIO, /* Inhibit switch power-off */
MPP36_GPIO, /* SATA HDD1 presence */
MPP37_GPIO, /* SATA HDD2 presence */
MPP40_GPIO, /* eSATA presence */
- MPP44_GPIO, /* CPLD extension (data 0) */
- MPP45_GPIO, /* CPLD extension (data 1) */
- MPP46_GPIO, /* CPLD extension (data 2) */
- MPP47_GPIO, /* CPLD extension (addr 0) */
- MPP48_GPIO, /* CPLD extension (addr 1) */
- MPP49_GPIO, /* CPLD extension (addr 2) */
+ MPP44_GPIO, /* GPIO extension (data 0) */
+ MPP45_GPIO, /* GPIO extension (data 1) */
+ MPP46_GPIO, /* GPIO extension (data 2) */
+ MPP47_GPIO, /* GPIO extension (addr 0) */
+ MPP48_GPIO, /* GPIO extension (addr 1) */
+ MPP49_GPIO, /* GPIO extension (addr 2) */
0
};
@@ -324,7 +329,7 @@
MPP26_GE1_RXD2,
MPP27_GE1_RXD3,
MPP28_GPIO, /* USB enable host vbus */
- MPP29_GPIO, /* CPLD extension ALE */
+ MPP29_GPIO, /* GPIO extension ALE */
MPP30_GE1_RXCTL,
MPP31_GE1_RXCLK,
MPP32_GE1_TCLKOUT,
@@ -339,12 +344,12 @@
MPP41_GPIO, /* SATA HDD3 power */
MPP42_GPIO, /* SATA HDD4 power */
MPP43_GPIO, /* SATA HDD5 power */
- MPP44_GPIO, /* CPLD extension (data 0) */
- MPP45_GPIO, /* CPLD extension (data 1) */
- MPP46_GPIO, /* CPLD extension (data 2) */
- MPP47_GPIO, /* CPLD extension (addr 0) */
- MPP48_GPIO, /* CPLD extension (addr 1) */
- MPP49_GPIO, /* CPLD extension (addr 2) */
+ MPP44_GPIO, /* GPIO extension (data 0) */
+ MPP45_GPIO, /* GPIO extension (data 1) */
+ MPP46_GPIO, /* GPIO extension (data 2) */
+ MPP47_GPIO, /* GPIO extension (addr 0) */
+ MPP48_GPIO, /* GPIO extension (addr 1) */
+ MPP49_GPIO, /* GPIO extension (addr 2) */
0
};
@@ -366,7 +371,10 @@
else
kirkwood_mpp_conf(net5big_v2_mpp_config);
- netxbig_v2_sata_power_init();
+ if (machine_is_net2big_v2())
+ lacie_v2_hdd_power_init(2);
+ else
+ lacie_v2_hdd_power_init(5);
kirkwood_ehci_init();
kirkwood_ge00_init(&netxbig_v2_ge00_data);
@@ -374,13 +382,12 @@
kirkwood_ge01_init(&netxbig_v2_ge01_data);
kirkwood_sata_init(&netxbig_v2_sata_data);
kirkwood_uart0_init();
- spi_register_board_info(netxbig_v2_spi_slave_info,
- ARRAY_SIZE(netxbig_v2_spi_slave_info));
- kirkwood_spi_init();
- kirkwood_i2c_init();
- i2c_register_board_info(0, netxbig_v2_i2c_info,
- ARRAY_SIZE(netxbig_v2_i2c_info));
+ lacie_v2_register_flash();
+ lacie_v2_register_i2c_devices();
+ if (machine_is_net5big_v2())
+ netxbig_v2_leds.dev.platform_data = &net5big_v2_leds_data;
+ platform_device_register(&netxbig_v2_leds);
platform_device_register(&netxbig_v2_gpio_buttons);
if (gpio_request(NETXBIG_V2_GPIO_POWER_OFF, "power-off") == 0 &&
@@ -398,7 +405,7 @@
.init_machine = netxbig_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
- .timer = &netxbig_v2_timer,
+ .timer = &lacie_v2_timer,
MACHINE_END
#endif
@@ -410,6 +417,6 @@
.init_machine = netxbig_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
- .timer = &netxbig_v2_timer,
+ .timer = &lacie_v2_timer,
MACHINE_END
#endif
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
index fd06be6..38017c8 100644
--- a/arch/arm/mach-kirkwood/openrd-setup.c
+++ b/arch/arm/mach-kirkwood/openrd-setup.c
@@ -16,6 +16,7 @@
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <linux/i2c.h>
+#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
@@ -57,7 +58,22 @@
};
static unsigned int openrd_mpp_config[] __initdata = {
+ MPP12_SD_CLK,
+ MPP13_SD_CMD,
+ MPP14_SD_D0,
+ MPP15_SD_D1,
+ MPP16_SD_D2,
+ MPP17_SD_D3,
+ MPP28_GPIO,
MPP29_GPIO,
+ MPP34_GPIO,
+ 0
+};
+
+/* Configure MPP for UART1 */
+static unsigned int openrd_uart1_mpp_config[] __initdata = {
+ MPP13_UART1_TXD,
+ MPP14_UART1_RXD,
0
};
@@ -67,6 +83,68 @@
},
};
+static int __initdata uart1;
+
+static int __init sd_uart_selection(char *str)
+{
+ uart1 = -EINVAL;
+
+ /* Default is SD. Change if required, for UART */
+ if (!str)
+ return 0;
+
+ if (!strncmp(str, "232", 3)) {
+ uart1 = 232;
+ } else if (!strncmp(str, "485", 3)) {
+ /* OpenRD-Base doesn't have RS485. Treat is as an
+ * unknown argument & just have default setting -
+ * which is SD */
+ if (machine_is_openrd_base()) {
+ uart1 = -ENODEV;
+ return 1;
+ }
+
+ uart1 = 485;
+ }
+ return 1;
+}
+/* Parse boot_command_line string kw_openrd_init_uart1=232/485 */
+__setup("kw_openrd_init_uart1=", sd_uart_selection);
+
+static int __init uart1_mpp_config(void)
+{
+ kirkwood_mpp_conf(openrd_uart1_mpp_config);
+
+ if (gpio_request(34, "SD_UART1_SEL")) {
+ printk(KERN_ERR "GPIO request failed for SD/UART1 selection"
+ ", gpio: 34\n");
+ return -EIO;
+ }
+
+ if (gpio_request(28, "RS232_RS485_SEL")) {
+ printk(KERN_ERR "GPIO request failed for RS232/RS485 selection"
+ ", gpio# 28\n");
+ gpio_free(34);
+ return -EIO;
+ }
+
+ /* Select UART1
+ * Pin # 34: 0 => UART1, 1 => SD */
+ gpio_direction_output(34, 0);
+
+ /* Select RS232 OR RS485
+ * Pin # 28: 0 => RS232, 1 => RS485 */
+ if (uart1 == 232)
+ gpio_direction_output(28, 0);
+ else
+ gpio_direction_output(28, 1);
+
+ gpio_free(34);
+ gpio_free(28);
+
+ return 0;
+}
+
static void __init openrd_init(void)
{
/*
@@ -90,7 +168,6 @@
kirkwood_ge01_init(&openrd_ge01_data);
kirkwood_sata_init(&openrd_sata_data);
- kirkwood_sdio_init(&openrd_mvsdio_data);
kirkwood_i2c_init();
@@ -99,6 +176,28 @@
ARRAY_SIZE(i2c_board_info));
kirkwood_audio_init();
}
+
+ if (uart1 <= 0) {
+ if (uart1 < 0)
+ printk(KERN_ERR "Invalid kernel parameter to select "
+ "UART1. Defaulting to SD. ERROR CODE: %d\n",
+ uart1);
+
+ /* Select SD
+ * Pin # 34: 0 => UART1, 1 => SD */
+ if (gpio_request(34, "SD_UART1_SEL")) {
+ printk(KERN_ERR "GPIO request failed for SD/UART1 "
+ "selection, gpio: 34\n");
+ } else {
+
+ gpio_direction_output(34, 1);
+ gpio_free(34);
+ kirkwood_sdio_init(&openrd_mvsdio_data);
+ }
+ } else {
+ if (!uart1_mpp_config())
+ kirkwood_uart1_init();
+ }
}
static int __init openrd_pci_init(void)
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index 6ab843e..0711d3b 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -57,6 +57,13 @@
PXA910-based development board. Since MMP2 is compatible to
ARMv6 architecture.
+config MACH_TETON_BGA
+ bool "Marvell's PXA168 Teton BGA Development Board"
+ select CPU_PXA168
+ help
+ Say 'Y' here if you want to support the Marvell PXA168-based
+ Teton BGA Development Board.
+
endmenu
config CPU_PXA168
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index 8b66d06..751cdbf 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -17,3 +17,4 @@
obj-$(CONFIG_MACH_TTC_DKB) += ttc_dkb.o
obj-$(CONFIG_MACH_FLINT) += flint.o
obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o
+obj-$(CONFIG_MACH_TETON_BGA) += teton_bga.o
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index 0629394..4681bed 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -16,6 +16,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
+#include <linux/interrupt.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -23,6 +24,9 @@
#include <mach/mfp-pxa168.h>
#include <mach/pxa168.h>
#include <mach/gpio.h>
+#include <video/pxa168fb.h>
+#include <linux/input.h>
+#include <plat/pxa27x_keypad.h>
#include "common.h"
@@ -66,6 +70,43 @@
GPIO115_I2S_BCLK,
GPIO116_I2S_RXD,
GPIO117_I2S_TXD,
+
+ /* LCD */
+ GPIO56_LCD_FCLK_RD,
+ GPIO57_LCD_LCLK_A0,
+ GPIO58_LCD_PCLK_WR,
+ GPIO59_LCD_DENA_BIAS,
+ GPIO60_LCD_DD0,
+ GPIO61_LCD_DD1,
+ GPIO62_LCD_DD2,
+ GPIO63_LCD_DD3,
+ GPIO64_LCD_DD4,
+ GPIO65_LCD_DD5,
+ GPIO66_LCD_DD6,
+ GPIO67_LCD_DD7,
+ GPIO68_LCD_DD8,
+ GPIO69_LCD_DD9,
+ GPIO70_LCD_DD10,
+ GPIO71_LCD_DD11,
+ GPIO72_LCD_DD12,
+ GPIO73_LCD_DD13,
+ GPIO74_LCD_DD14,
+ GPIO75_LCD_DD15,
+ GPIO76_LCD_DD16,
+ GPIO77_LCD_DD17,
+ GPIO78_LCD_DD18,
+ GPIO79_LCD_DD19,
+ GPIO80_LCD_DD20,
+ GPIO81_LCD_DD21,
+ GPIO82_LCD_DD22,
+ GPIO83_LCD_DD23,
+
+ /* Keypad */
+ GPIO109_KP_MKIN1,
+ GPIO110_KP_MKIN0,
+ GPIO111_KP_MKOUT7,
+ GPIO112_KP_MKOUT6,
+ GPIO121_KP_MKIN4,
};
static struct smc91x_platdata smc91x_info = {
@@ -134,6 +175,51 @@
{ I2C_BOARD_INFO("wm8753", 0x1b), },
};
+static struct fb_videomode video_modes[] = {
+ [0] = {
+ .pixclock = 30120,
+ .refresh = 60,
+ .xres = 800,
+ .yres = 480,
+ .hsync_len = 1,
+ .left_margin = 215,
+ .right_margin = 40,
+ .vsync_len = 1,
+ .upper_margin = 34,
+ .lower_margin = 10,
+ .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
+ },
+};
+
+struct pxa168fb_mach_info aspenite_lcd_info = {
+ .id = "Graphic Frame",
+ .modes = video_modes,
+ .num_modes = ARRAY_SIZE(video_modes),
+ .pix_fmt = PIX_FMT_RGB565,
+ .io_pin_allocation_mode = PIN_MODE_DUMB_24,
+ .dumb_mode = DUMB_MODE_RGB888,
+ .active = 1,
+ .panel_rbswap = 0,
+ .invert_pixclock = 0,
+};
+
+static unsigned int aspenite_matrix_key_map[] = {
+ KEY(0, 6, KEY_UP), /* SW 4 */
+ KEY(0, 7, KEY_DOWN), /* SW 5 */
+ KEY(1, 6, KEY_LEFT), /* SW 6 */
+ KEY(1, 7, KEY_RIGHT), /* SW 7 */
+ KEY(4, 6, KEY_ENTER), /* SW 8 */
+ KEY(4, 7, KEY_ESC), /* SW 9 */
+};
+
+static struct pxa27x_keypad_platform_data aspenite_keypad_info __initdata = {
+ .matrix_key_rows = 5,
+ .matrix_key_cols = 8,
+ .matrix_key_map = aspenite_matrix_key_map,
+ .matrix_key_map_size = ARRAY_SIZE(aspenite_matrix_key_map),
+ .debounce_interval = 30,
+};
+
static void __init common_init(void)
{
mfp_config(ARRAY_AND_SIZE(common_pin_config));
@@ -143,6 +229,8 @@
pxa168_add_twsi(1, NULL, ARRAY_AND_SIZE(aspenite_i2c_info));
pxa168_add_ssp(1);
pxa168_add_nand(&aspenite_nand_info);
+ pxa168_add_fb(&aspenite_lcd_info);
+ pxa168_add_keypad(&aspenite_keypad_info);
/* off-chip devices */
platform_device_register(&smc91x_device);
@@ -152,6 +240,7 @@
.phys_io = APB_PHYS_BASE,
.io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
.map_io = mmp_map_io,
+ .nr_irqs = IRQ_BOARD_START,
.init_irq = pxa168_init_irq,
.timer = &pxa168_timer,
.init_machine = common_init,
@@ -161,6 +250,7 @@
.phys_io = APB_PHYS_BASE,
.io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
.map_io = mmp_map_io,
+ .nr_irqs = IRQ_BOARD_START,
.init_irq = pxa168_init_irq,
.timer = &pxa168_timer,
.init_machine = common_init,
diff --git a/arch/arm/mach-mmp/common.c b/arch/arm/mach-mmp/common.c
index 3b29fa7..0ec0ca8 100644
--- a/arch/arm/mach-mmp/common.c
+++ b/arch/arm/mach-mmp/common.c
@@ -10,13 +10,20 @@
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/module.h>
#include <asm/page.h>
#include <asm/mach/map.h>
#include <mach/addr-map.h>
+#include <mach/cputype.h>
#include "common.h"
+#define MMP_CHIPID (AXI_VIRT_BASE + 0x82c00)
+
+unsigned int mmp_chip_id;
+EXPORT_SYMBOL(mmp_chip_id);
+
static struct map_desc standard_io_desc[] __initdata = {
{
.pfn = __phys_to_pfn(APB_PHYS_BASE),
@@ -34,4 +41,7 @@
void __init mmp_map_io(void)
{
iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
+
+ /* this is early, initialize mmp_chip_id here */
+ mmp_chip_id = __raw_readl(MMP_CHIPID);
}
diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c
index e4312d2..c558425 100644
--- a/arch/arm/mach-mmp/flint.c
+++ b/arch/arm/mach-mmp/flint.c
@@ -16,6 +16,7 @@
#include <linux/smc91x.h>
#include <linux/io.h>
#include <linux/gpio.h>
+#include <linux/interrupt.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -25,6 +26,8 @@
#include "common.h"
+#define FLINT_NR_IRQS (IRQ_BOARD_START + 48)
+
static unsigned long flint_pin_config[] __initdata = {
/* UART1 */
GPIO45_UART1_RXD,
@@ -116,6 +119,7 @@
.phys_io = APB_PHYS_BASE,
.io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
.map_io = mmp_map_io,
+ .nr_irqs = FLINT_NR_IRQS,
.init_irq = mmp2_init_irq,
.timer = &mmp2_timer,
.init_machine = flint_init,
diff --git a/arch/arm/mach-mmp/include/mach/cputype.h b/arch/arm/mach-mmp/include/mach/cputype.h
index 83b1872..f43a68b 100644
--- a/arch/arm/mach-mmp/include/mach/cputype.h
+++ b/arch/arm/mach-mmp/include/mach/cputype.h
@@ -4,36 +4,51 @@
#include <asm/cputype.h>
/*
- * CPU Stepping OLD_ID CPU_ID CHIP_ID
+ * CPU Stepping CPU_ID CHIP_ID
*
- * PXA168 A0 0x41159263 0x56158400 0x00A0A333
- * PXA910 Y0 0x41159262 0x56158000 0x00F0C910
- * MMP2 Z0 0x560f5811
+ * PXA168 S0 0x56158400 0x0000C910
+ * PXA168 A0 0x56158400 0x00A0A168
+ * PXA910 Y1 0x56158400 0x00F2C920
+ * PXA910 A0 0x56158400 0x00F2C910
+ * PXA910 A1 0x56158400 0x00A0C910
+ * PXA920 Y0 0x56158400 0x00F2C920
+ * PXA920 A0 0x56158400 0x00A0C920
+ * PXA920 A1 0x56158400 0x00A1C920
+ * MMP2 Z0 0x560f5811 0x00F00410
+ * MMP2 Z1 0x560f5811 0x00E00410
+ * MMP2 A0 0x560f5811 0x00A0A610
*/
+extern unsigned int mmp_chip_id;
+
#ifdef CONFIG_CPU_PXA168
-# define __cpu_is_pxa168(id) \
- ({ unsigned int _id = ((id) >> 8) & 0xff; _id == 0x84; })
+static inline int cpu_is_pxa168(void)
+{
+ return (((read_cpuid_id() >> 8) & 0xff) == 0x84) &&
+ ((mmp_chip_id & 0xfff) == 0x168);
+}
#else
-# define __cpu_is_pxa168(id) (0)
+#define cpu_is_pxa168() (0)
#endif
+/* cpu_is_pxa910() is shared on both pxa910 and pxa920 */
#ifdef CONFIG_CPU_PXA910
-# define __cpu_is_pxa910(id) \
- ({ unsigned int _id = ((id) >> 8) & 0xff; _id == 0x80; })
+static inline int cpu_is_pxa910(void)
+{
+ return (((read_cpuid_id() >> 8) & 0xff) == 0x84) &&
+ (((mmp_chip_id & 0xfff) == 0x910) ||
+ ((mmp_chip_id & 0xfff) == 0x920));
+}
#else
-# define __cpu_is_pxa910(id) (0)
+#define cpu_is_pxa910() (0)
#endif
#ifdef CONFIG_CPU_MMP2
-# define __cpu_is_mmp2(id) \
- ({ unsigned int _id = ((id) >> 8) & 0xff; _id == 0x58; })
+static inline int cpu_is_mmp2(void)
+{
+ return (((cpu_readid_id() >> 8) & 0xff) == 0x58);
#else
-# define __cpu_is_mmp2(id) (0)
+#define cpu_is_mmp2() (0)
#endif
-#define cpu_is_pxa168() ({ __cpu_is_pxa168(read_cpuid_id()); })
-#define cpu_is_pxa910() ({ __cpu_is_pxa910(read_cpuid_id()); })
-#define cpu_is_mmp2() ({ __cpu_is_mmp2(read_cpuid_id()); })
-
#endif /* __ASM_MACH_CPUTYPE_H */
diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/include/mach/irqs.h
index b379cde..a09d328 100644
--- a/arch/arm/mach-mmp/include/mach/irqs.h
+++ b/arch/arm/mach-mmp/include/mach/irqs.h
@@ -222,10 +222,8 @@
#define IRQ_GPIO_NUM 192
#define IRQ_GPIO(x) (IRQ_GPIO_START + (x))
-/* Board IRQ - 64 by default, increase if not enough */
#define IRQ_BOARD_START (IRQ_GPIO_START + IRQ_GPIO_NUM)
-#define IRQ_BOARD_END (IRQ_BOARD_START + 64)
-#define NR_IRQS (IRQ_BOARD_END)
+#define NR_IRQS (IRQ_BOARD_START)
#endif /* __ASM_MACH_IRQS_H */
diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
index ded43c4..4621067 100644
--- a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
@@ -289,4 +289,11 @@
#define GPIO86_PWM1_OUT MFP_CFG(GPIO86, AF2)
#define GPIO86_PWM2_OUT MFP_CFG(GPIO86, AF3)
+/* Keypad */
+#define GPIO109_KP_MKIN1 MFP_CFG(GPIO109, AF7)
+#define GPIO110_KP_MKIN0 MFP_CFG(GPIO110, AF7)
+#define GPIO111_KP_MKOUT7 MFP_CFG(GPIO111, AF7)
+#define GPIO112_KP_MKOUT6 MFP_CFG(GPIO112, AF7)
+#define GPIO121_KP_MKIN4 MFP_CFG(GPIO121, AF7)
+
#endif /* __ASM_MACH_MFP_PXA168_H */
diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h
index 27e1bc7..1801e42 100644
--- a/arch/arm/mach-mmp/include/mach/pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/pxa168.h
@@ -5,11 +5,15 @@
extern struct sys_timer pxa168_timer;
extern void __init pxa168_init_irq(void);
+extern void pxa168_clear_keypad_wakeup(void);
#include <linux/i2c.h>
#include <mach/devices.h>
#include <plat/i2c.h>
#include <plat/pxa3xx_nand.h>
+#include <video/pxa168fb.h>
+#include <plat/pxa27x_keypad.h>
+#include <mach/cputype.h>
extern struct pxa_device_desc pxa168_device_uart1;
extern struct pxa_device_desc pxa168_device_uart2;
@@ -25,6 +29,8 @@
extern struct pxa_device_desc pxa168_device_ssp4;
extern struct pxa_device_desc pxa168_device_ssp5;
extern struct pxa_device_desc pxa168_device_nand;
+extern struct pxa_device_desc pxa168_device_fb;
+extern struct pxa_device_desc pxa168_device_keypad;
static inline int pxa168_add_uart(int id)
{
@@ -97,4 +103,18 @@
{
return pxa_register_device(&pxa168_device_nand, info, sizeof(*info));
}
+
+static inline int pxa168_add_fb(struct pxa168fb_mach_info *mi)
+{
+ return pxa_register_device(&pxa168_device_fb, mi, sizeof(*mi));
+}
+
+static inline int pxa168_add_keypad(struct pxa27x_keypad_platform_data *data)
+{
+ if (cpu_is_pxa168())
+ data->clear_wakeup_event = pxa168_clear_keypad_wakeup;
+
+ return pxa_register_device(&pxa168_device_keypad, data, sizeof(*data));
+}
+
#endif /* __ASM_MACH_PXA168_H */
diff --git a/arch/arm/mach-mmp/include/mach/regs-apmu.h b/arch/arm/mach-mmp/include/mach/regs-apmu.h
index 9190305..ac47023 100644
--- a/arch/arm/mach-mmp/include/mach/regs-apmu.h
+++ b/arch/arm/mach-mmp/include/mach/regs-apmu.h
@@ -33,4 +33,16 @@
#define APMU_FNRST_DIS (1 << 1)
#define APMU_AXIRST_DIS (1 << 0)
+/* Wake Clear Register */
+#define APMU_WAKE_CLR APMU_REG(0x07c)
+
+#define APMU_PXA168_KP_WAKE_CLR (1 << 7)
+#define APMU_PXA168_CFI_WAKE_CLR (1 << 6)
+#define APMU_PXA168_XD_WAKE_CLR (1 << 5)
+#define APMU_PXA168_MSP_WAKE_CLR (1 << 4)
+#define APMU_PXA168_SD4_WAKE_CLR (1 << 3)
+#define APMU_PXA168_SD3_WAKE_CLR (1 << 2)
+#define APMU_PXA168_SD2_WAKE_CLR (1 << 1)
+#define APMU_PXA168_SD1_WAKE_CLR (1 << 0)
+
#endif /* __ASM_MACH_REGS_APMU_H */
diff --git a/arch/arm/mach-mmp/include/mach/teton_bga.h b/arch/arm/mach-mmp/include/mach/teton_bga.h
new file mode 100644
index 0000000..61a539b
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/teton_bga.h
@@ -0,0 +1,27 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/teton_bga.h
+ *
+ * Support for the Marvell PXA168 Teton BGA Development Platform.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#ifndef __ASM_MACH_TETON_BGA_H
+#define __ASM_MACH_TETON_BGA_H
+
+/* GPIOs */
+#define MMC_PWENA_GPIO 27
+#define USBHPENB_GPIO 55
+#define RTC_INT_GPIO 78
+#define LCD_VBLK_EN_GPIO 79
+#define LCD_DVDD_EN_GPIO 80
+#define RST_WIFI_GPIO 81
+#define CF_PWEN_GPIO 82
+#define USB_OC_GPIO 83
+#define PWM_GPIO 84
+#define USBHPENA_GPIO 85
+#define TS_INT_GPIO 86
+#define CIR_GPIO 108
+
+#endif /* __ASM_MACH_TETON_BGA_H */
diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c
index 80c3e7a..940ee03 100644
--- a/arch/arm/mach-mmp/jasper.c
+++ b/arch/arm/mach-mmp/jasper.c
@@ -18,16 +18,18 @@
#include <linux/regulator/machine.h>
#include <linux/regulator/max8649.h>
#include <linux/mfd/max8925.h>
+#include <linux/interrupt.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/addr-map.h>
#include <mach/mfp-mmp2.h>
#include <mach/mmp2.h>
-#include <mach/irqs.h>
#include "common.h"
+#define JASPER_NR_IRQS (IRQ_BOARD_START + 48)
+
static unsigned long jasper_pin_config[] __initdata = {
/* UART1 */
GPIO29_UART1_RXD,
@@ -137,6 +139,7 @@
.phys_io = APB_PHYS_BASE,
.io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
.map_io = mmp_map_io,
+ .nr_irqs = JASPER_NR_IRQS,
.init_irq = mmp2_init_irq,
.timer = &mmp2_timer,
.init_machine = jasper_init,
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index 652ae66..72b4e76 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -77,8 +77,10 @@
static APBC_CLK(ssp3, PXA168_SSP3, 4, 0);
static APBC_CLK(ssp4, PXA168_SSP4, 4, 0);
static APBC_CLK(ssp5, PXA168_SSP5, 4, 0);
+static APBC_CLK(keypad, PXA168_KPC, 0, 32000);
static APMU_CLK(nand, NAND, 0x01db, 208000000);
+static APMU_CLK(lcd, LCD, 0x7f, 312000000);
/* device and clock bindings */
static struct clk_lookup pxa168_clkregs[] = {
@@ -96,6 +98,8 @@
INIT_CLKREG(&clk_ssp4, "pxa168-ssp.3", NULL),
INIT_CLKREG(&clk_ssp5, "pxa168-ssp.4", NULL),
INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
+ INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL),
+ INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL),
};
static int __init pxa168_init(void)
@@ -132,6 +136,16 @@
.init = pxa168_timer_init,
};
+void pxa168_clear_keypad_wakeup(void)
+{
+ uint32_t val;
+ uint32_t mask = APMU_PXA168_KP_WAKE_CLR;
+
+ /* wake event clear is needed in order to clear keypad interrupt */
+ val = __raw_readl(APMU_WAKE_CLR);
+ __raw_writel(val | mask, APMU_WAKE_CLR);
+}
+
/* on-chip devices */
PXA168_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4017000, 0x30, 21, 22);
PXA168_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4018000, 0x30, 23, 24);
@@ -147,3 +161,5 @@
PXA168_DEVICE(ssp3, "pxa168-ssp", 2, SSP3, 0xd401f000, 0x40, 56, 57);
PXA168_DEVICE(ssp4, "pxa168-ssp", 3, SSP4, 0xd4020000, 0x40, 58, 59);
PXA168_DEVICE(ssp5, "pxa168-ssp", 4, SSP5, 0xd4021000, 0x40, 60, 61);
+PXA168_DEVICE(fb, "pxa168-fb", -1, LCD, 0xd420b000, 0x1c8);
+PXA168_DEVICE(keypad, "pxa27x-keypad", -1, KEYPAD, 0xd4012000, 0x4c);
diff --git a/arch/arm/mach-mmp/teton_bga.c b/arch/arm/mach-mmp/teton_bga.c
new file mode 100644
index 0000000..a4a375c
--- /dev/null
+++ b/arch/arm/mach-mmp/teton_bga.c
@@ -0,0 +1,91 @@
+/*
+ * linux/arch/arm/mach-mmp/teton_bga.c
+ *
+ * Support for the Marvell PXA168 Teton BGA Development Platform.
+ *
+ * Author: Mark F. Brown <mark.brown314@gmail.com>
+ *
+ * This code is based on aspenite.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <plat/pxa27x_keypad.h>
+#include <linux/i2c.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/addr-map.h>
+#include <mach/mfp-pxa168.h>
+#include <mach/pxa168.h>
+#include <mach/teton_bga.h>
+
+#include "common.h"
+
+static unsigned long teton_bga_pin_config[] __initdata = {
+ /* UART1 */
+ GPIO107_UART1_TXD,
+ GPIO108_UART1_RXD,
+
+ /* Keypad */
+ GPIO109_KP_MKIN1,
+ GPIO110_KP_MKIN0,
+ GPIO111_KP_MKOUT7,
+ GPIO112_KP_MKOUT6,
+
+ /* I2C Bus */
+ GPIO105_CI2C_SDA,
+ GPIO106_CI2C_SCL,
+
+ /* RTC */
+ GPIO78_GPIO,
+};
+
+static unsigned int teton_bga_matrix_key_map[] = {
+ KEY(0, 6, KEY_ESC),
+ KEY(0, 7, KEY_ENTER),
+ KEY(1, 6, KEY_LEFT),
+ KEY(1, 7, KEY_RIGHT),
+};
+
+static struct pxa27x_keypad_platform_data teton_bga_keypad_info __initdata = {
+ .matrix_key_rows = 2,
+ .matrix_key_cols = 8,
+ .matrix_key_map = teton_bga_matrix_key_map,
+ .matrix_key_map_size = ARRAY_SIZE(teton_bga_matrix_key_map),
+ .debounce_interval = 30,
+};
+
+static struct i2c_board_info teton_bga_i2c_info[] __initdata = {
+ {
+ I2C_BOARD_INFO("ds1337", 0x68),
+ .irq = gpio_to_irq(RTC_INT_GPIO)
+ },
+};
+
+static void __init teton_bga_init(void)
+{
+ mfp_config(ARRAY_AND_SIZE(teton_bga_pin_config));
+
+ /* on-chip devices */
+ pxa168_add_uart(1);
+ pxa168_add_keypad(&teton_bga_keypad_info);
+ pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(teton_bga_i2c_info));
+}
+
+MACHINE_START(TETON_BGA, "PXA168-based Teton BGA Development Platform")
+ .phys_io = APB_PHYS_BASE,
+ .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
+ .map_io = mmp_map_io,
+ .nr_irqs = IRQ_BOARD_START,
+ .init_irq = pxa168_init_irq,
+ .timer = &pxa168_timer,
+ .init_machine = teton_bga_init,
+MACHINE_END
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
index ee65e05..5457113 100644
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -14,6 +14,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/onenand.h>
+#include <linux/interrupt.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -24,6 +25,8 @@
#include "common.h"
+#define TTCDKB_NR_IRQS (IRQ_BOARD_START + 24)
+
static unsigned long ttc_dkb_pin_config[] __initdata = {
/* UART2 */
GPIO47_UART2_RXD,
@@ -125,6 +128,7 @@
.phys_io = APB_PHYS_BASE,
.io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
.map_io = mmp_map_io,
+ .nr_irqs = TTCDKB_NR_IRQS,
.init_irq = pxa910_init_irq,
.timer = &pxa910_timer,
.init_machine = ttc_dkb_init,
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index 47264a7..3115a29 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -10,6 +10,8 @@
select MSM_SMD
select MSM_SMD_PKG3
select CPU_V6
+ select MSM_PROC_COMM
+ select HAS_MSM_DEBUG_UART_PHYS
config ARCH_MSM7X30
bool "MSM7x30"
@@ -18,6 +20,9 @@
select MSM_VIC
select CPU_V7
select MSM_REMOTE_SPINLOCK_DEKKERS
+ select MSM_GPIOMUX
+ select MSM_PROC_COMM
+ select HAS_MSM_DEBUG_UART_PHYS
config ARCH_QSD8X50
bool "QSD8X50"
@@ -26,6 +31,19 @@
select MSM_VIC
select CPU_V7
select MSM_REMOTE_SPINLOCK_LDREX
+ select MSM_GPIOMUX
+ select MSM_PROC_COMM
+ select HAS_MSM_DEBUG_UART_PHYS
+
+config ARCH_MSM8X60
+ bool "MSM8X60"
+ select ARM_GIC
+ select CPU_V7
+ select MSM_V2_TLMM
+ select MSM_GPIOMUX
+ select MACH_MSM8X60_SURF if (!MACH_MSM8X60_RUMI3 && !MACH_MSM8X60_SIM \
+ && !MACH_MSM8X60_FFA)
+
endchoice
config MSM_SOC_REV_A
@@ -36,6 +54,9 @@
config ARCH_MSM_SCORPION
bool
+config HAS_MSM_DEBUG_UART_PHYS
+ bool
+
config MSM_VIC
bool
@@ -74,6 +95,30 @@
help
Support for the Qualcomm ST1.5.
+config MACH_MSM8X60_RUMI3
+ depends on ARCH_MSM8X60
+ bool "MSM8x60 RUMI3"
+ help
+ Support for the Qualcomm MSM8x60 RUMI3 emulator.
+
+config MACH_MSM8X60_SURF
+ depends on ARCH_MSM8X60
+ bool "MSM8x60 SURF"
+ help
+ Support for the Qualcomm MSM8x60 SURF eval board.
+
+config MACH_MSM8X60_SIM
+ depends on ARCH_MSM8X60
+ bool "MSM8x60 Simulator"
+ help
+ Support for the Qualcomm MSM8x60 simulator.
+
+config MACH_MSM8X60_FFA
+ depends on ARCH_MSM8X60
+ bool "MSM8x60 FFA"
+ help
+ Support for the Qualcomm MSM8x60 FFA eval board.
+
endmenu
config MSM_DEBUG_UART
@@ -82,6 +127,7 @@
default 2 if MSM_DEBUG_UART2
default 3 if MSM_DEBUG_UART3
+if HAS_MSM_DEBUG_UART_PHYS
choice
prompt "Debug UART"
@@ -99,11 +145,20 @@
config MSM_DEBUG_UART3
bool "UART3"
endchoice
+endif
config MSM_SMD_PKG3
bool
+config MSM_PROC_COMM
+ bool
+
config MSM_SMD
bool
+config MSM_GPIOMUX
+ bool
+
+config MSM_V2_TLMM
+ bool
endif
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index 7046106..b5a7b07 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -1,16 +1,20 @@
-obj-y += proc_comm.o
-obj-y += io.o idle.o timer.o dma.o
-obj-y += vreg.o
+obj-y += io.o idle.o timer.o
+ifndef CONFIG_ARCH_MSM8X60
obj-y += acpuclock-arm11.o
-obj-y += clock.o clock-pcom.o
-obj-y += gpio.o
+obj-y += dma.o
+endif
ifdef CONFIG_MSM_VIC
obj-y += irq-vic.o
else
+ifndef CONFIG_ARCH_MSM8X60
obj-y += irq.o
endif
+endif
+obj-$(CONFIG_ARCH_MSM8X60) += clock-dummy.o iommu.o iommu_dev.o devices-msm8x60-iommu.o
+obj-$(CONFIG_MSM_PROC_COMM) += proc_comm.o clock-pcom.o vreg.o
+obj-$(CONFIG_MSM_PROC_COMM) += clock.o
obj-$(CONFIG_ARCH_QSD8X50) += sirc.o
obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o
obj-$(CONFIG_MSM_SMD) += last_radio_log.o
@@ -19,4 +23,11 @@
obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o
+obj-$(CONFIG_ARCH_MSM8X60) += board-msm8x60.o
+obj-$(CONFIG_ARCH_MSM7X30) += gpiomux-7x30.o gpiomux-v1.o gpiomux.o
+obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o gpiomux-v1.o gpiomux.o
+obj-$(CONFIG_ARCH_MSM8X60) += gpiomux-8x60.o gpiomux-v2.o gpiomux.o
+ifndef CONFIG_MSM_V2_TLMM
+obj-y += gpio.o
+endif
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
index e329819..76d5a22 100644
--- a/arch/arm/mach-msm/board-msm7x30.c
+++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -39,27 +39,11 @@
extern struct sys_timer msm_timer;
-#ifdef CONFIG_SERIAL_MSM_CONSOLE
-static struct msm_gpio uart2_config_data[] = {
- { GPIO_CFG(49, 2, GPIO_OUTPUT, GPIO_PULL_DOWN, GPIO_2MA), "UART2_RFR"},
- { GPIO_CFG(50, 2, GPIO_INPUT, GPIO_PULL_DOWN, GPIO_2MA), "UART2_CTS"},
- { GPIO_CFG(51, 2, GPIO_INPUT, GPIO_PULL_DOWN, GPIO_2MA), "UART2_Rx"},
- { GPIO_CFG(52, 2, GPIO_OUTPUT, GPIO_PULL_DOWN, GPIO_2MA), "UART2_Tx"},
-};
-
-static void msm7x30_init_uart2(void)
-{
- msm_gpios_request_enable(uart2_config_data,
- ARRAY_SIZE(uart2_config_data));
-
-}
-#endif
-
static struct platform_device *devices[] __initdata = {
#if defined(CONFIG_SERIAL_MSM) || defined(CONFIG_MSM_SERIAL_DEBUGGER)
&msm_device_uart2,
#endif
-
+ &msm_device_smd,
};
static void __init msm7x30_init_irq(void)
@@ -70,10 +54,6 @@
static void __init msm7x30_init(void)
{
platform_add_devices(devices, ARRAY_SIZE(devices));
-#ifdef CONFIG_SERIAL_MSM_CONSOLE
- msm7x30_init_uart2();
-#endif
-
}
static void __init msm7x30_map_io(void)
diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c
new file mode 100644
index 0000000..7486a68
--- /dev/null
+++ b/arch/arm/mach-msm/board-msm8x60.c
@@ -0,0 +1,100 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
+
+#include <mach/board.h>
+#include <mach/msm_iomap.h>
+
+void __iomem *gic_cpu_base_addr;
+
+unsigned long clk_get_max_axi_khz(void)
+{
+ return 0;
+}
+
+static void __init msm8x60_map_io(void)
+{
+ msm_map_msm8x60_io();
+}
+
+static void __init msm8x60_init_irq(void)
+{
+ unsigned int i;
+
+ gic_dist_init(0, MSM_QGIC_DIST_BASE, GIC_PPI_START);
+ gic_cpu_base_addr = (void *)MSM_QGIC_CPU_BASE;
+ gic_cpu_init(0, MSM_QGIC_CPU_BASE);
+
+ /* Edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */
+ writel(0xFFFFD7FF, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4);
+
+ /* RUMI does not adhere to GIC spec by enabling STIs by default.
+ * Enable/clear is supposed to be RO for STIs, but is RW on RUMI.
+ */
+ if (!machine_is_msm8x60_sim())
+ writel(0x0000FFFF, MSM_QGIC_DIST_BASE + GIC_DIST_ENABLE_SET);
+
+ /* FIXME: Not installing AVS_SVICINT and AVS_SVICINTSWDONE yet
+ * as they are configured as level, which does not play nice with
+ * handle_percpu_irq.
+ */
+ for (i = GIC_PPI_START; i < GIC_SPI_START; i++) {
+ if (i != AVS_SVICINT && i != AVS_SVICINTSWDONE)
+ set_irq_handler(i, handle_percpu_irq);
+ }
+}
+
+static void __init msm8x60_init(void)
+{
+}
+
+MACHINE_START(MSM8X60_RUMI3, "QCT MSM8X60 RUMI3")
+ .map_io = msm8x60_map_io,
+ .init_irq = msm8x60_init_irq,
+ .init_machine = msm8x60_init,
+ .timer = &msm_timer,
+MACHINE_END
+
+MACHINE_START(MSM8X60_SURF, "QCT MSM8X60 SURF")
+ .map_io = msm8x60_map_io,
+ .init_irq = msm8x60_init_irq,
+ .init_machine = msm8x60_init,
+ .timer = &msm_timer,
+MACHINE_END
+
+MACHINE_START(MSM8X60_SIM, "QCT MSM8X60 SIMULATOR")
+ .map_io = msm8x60_map_io,
+ .init_irq = msm8x60_init_irq,
+ .init_machine = msm8x60_init,
+ .timer = &msm_timer,
+MACHINE_END
+
+MACHINE_START(MSM8X60_FFA, "QCT MSM8X60 FFA")
+ .map_io = msm8x60_map_io,
+ .init_irq = msm8x60_init_irq,
+ .init_machine = msm8x60_init,
+ .timer = &msm_timer,
+MACHINE_END
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
index e3cc807..d5d5e44 100644
--- a/arch/arm/mach-msm/board-qsd8x50.c
+++ b/arch/arm/mach-msm/board-qsd8x50.c
@@ -35,21 +35,50 @@
extern struct sys_timer msm_timer;
-static struct msm_gpio uart3_config_data[] = {
- { GPIO_CFG(86, 1, GPIO_INPUT, GPIO_PULL_DOWN, GPIO_2MA), "UART2_Rx"},
- { GPIO_CFG(87, 1, GPIO_OUTPUT, GPIO_PULL_DOWN, GPIO_2MA), "UART2_Tx"},
+static const resource_size_t qsd8x50_surf_smc91x_base __initdata = 0x70000300;
+static const unsigned qsd8x50_surf_smc91x_gpio __initdata = 156;
+
+/* Leave smc91x resources empty here, as we'll fill them in
+ * at run-time: they vary from board to board, and the true
+ * configuration won't be known until boot.
+ */
+static struct resource smc91x_resources[] __initdata = {
+ [0] = {
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .flags = IORESOURCE_IRQ,
+ },
};
+static struct platform_device smc91x_device __initdata = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+
+static int __init msm_init_smc91x(void)
+{
+ if (machine_is_qsd8x50_surf()) {
+ smc91x_resources[0].start = qsd8x50_surf_smc91x_base;
+ smc91x_resources[0].end = qsd8x50_surf_smc91x_base + 0xff;
+ smc91x_resources[1].start =
+ gpio_to_irq(qsd8x50_surf_smc91x_gpio);
+ smc91x_resources[1].end =
+ gpio_to_irq(qsd8x50_surf_smc91x_gpio);
+ platform_device_register(&smc91x_device);
+ }
+
+ return 0;
+}
+module_init(msm_init_smc91x);
+
static struct platform_device *devices[] __initdata = {
&msm_device_uart3,
+ &msm_device_smd,
};
-static void msm8x50_init_uart3(void)
-{
- msm_gpios_request_enable(uart3_config_data,
- ARRAY_SIZE(uart3_config_data));
-}
-
static void __init qsd8x50_map_io(void)
{
msm_map_qsd8x50_io();
@@ -64,7 +93,6 @@
static void __init qsd8x50_init(void)
{
- msm8x50_init_uart3();
platform_add_devices(devices, ARRAY_SIZE(devices));
}
diff --git a/arch/arm/mach-msm/clock-dummy.c b/arch/arm/mach-msm/clock-dummy.c
new file mode 100644
index 0000000..1250d22
--- /dev/null
+++ b/arch/arm/mach-msm/clock-dummy.c
@@ -0,0 +1,54 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ */
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/module.h>
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+ return ERR_PTR(-ENOENT);
+}
+EXPORT_SYMBOL(clk_get);
+
+int clk_enable(struct clk *clk)
+{
+ return -ENOENT;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ return 0;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ return -ENOENT;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+void clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_put);
diff --git a/arch/arm/mach-msm/devices-msm7x30.c b/arch/arm/mach-msm/devices-msm7x30.c
index b449e8a..7fcf2e3 100644
--- a/arch/arm/mach-msm/devices-msm7x30.c
+++ b/arch/arm/mach-msm/devices-msm7x30.c
@@ -51,6 +51,11 @@
.resource = resources_uart2,
};
+struct platform_device msm_device_smd = {
+ .name = "msm_smd",
+ .id = -1,
+};
+
struct clk msm_clocks_7x30[] = {
CLK_PCOM("adm_clk", ADM_CLK, NULL, 0),
CLK_PCOM("adsp_clk", ADSP_CLK, NULL, 0),
diff --git a/arch/arm/mach-msm/devices-msm8x60-iommu.c b/arch/arm/mach-msm/devices-msm8x60-iommu.c
new file mode 100644
index 0000000..89b9d44
--- /dev/null
+++ b/arch/arm/mach-msm/devices-msm8x60-iommu.c
@@ -0,0 +1,883 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/bootmem.h>
+
+#include <mach/msm_iomap-8x60.h>
+#include <mach/irqs-8x60.h>
+#include <mach/iommu.h>
+
+static struct resource msm_iommu_jpegd_resources[] = {
+ {
+ .start = MSM_IOMMU_JPEGD_PHYS,
+ .end = MSM_IOMMU_JPEGD_PHYS + MSM_IOMMU_JPEGD_SIZE - 1,
+ .name = "physbase",
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "nonsecure_irq",
+ .start = SMMU_JPEGD_CB_SC_NON_SECURE_IRQ,
+ .end = SMMU_JPEGD_CB_SC_NON_SECURE_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "secure_irq",
+ .start = SMMU_JPEGD_CB_SC_SECURE_IRQ,
+ .end = SMMU_JPEGD_CB_SC_SECURE_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource msm_iommu_vpe_resources[] = {
+ {
+ .start = MSM_IOMMU_VPE_PHYS,
+ .end = MSM_IOMMU_VPE_PHYS + MSM_IOMMU_VPE_SIZE - 1,
+ .name = "physbase",
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "nonsecure_irq",
+ .start = SMMU_VPE_CB_SC_NON_SECURE_IRQ,
+ .end = SMMU_VPE_CB_SC_NON_SECURE_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "secure_irq",
+ .start = SMMU_VPE_CB_SC_SECURE_IRQ,
+ .end = SMMU_VPE_CB_SC_SECURE_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource msm_iommu_mdp0_resources[] = {
+ {
+ .start = MSM_IOMMU_MDP0_PHYS,
+ .end = MSM_IOMMU_MDP0_PHYS + MSM_IOMMU_MDP0_SIZE - 1,
+ .name = "physbase",
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "nonsecure_irq",
+ .start = SMMU_MDP0_CB_SC_NON_SECURE_IRQ,
+ .end = SMMU_MDP0_CB_SC_NON_SECURE_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "secure_irq",
+ .start = SMMU_MDP0_CB_SC_SECURE_IRQ,
+ .end = SMMU_MDP0_CB_SC_SECURE_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource msm_iommu_mdp1_resources[] = {
+ {
+ .start = MSM_IOMMU_MDP1_PHYS,
+ .end = MSM_IOMMU_MDP1_PHYS + MSM_IOMMU_MDP1_SIZE - 1,
+ .name = "physbase",
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "nonsecure_irq",
+ .start = SMMU_MDP1_CB_SC_NON_SECURE_IRQ,
+ .end = SMMU_MDP1_CB_SC_NON_SECURE_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "secure_irq",
+ .start = SMMU_MDP1_CB_SC_SECURE_IRQ,
+ .end = SMMU_MDP1_CB_SC_SECURE_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource msm_iommu_rot_resources[] = {
+ {
+ .start = MSM_IOMMU_ROT_PHYS,
+ .end = MSM_IOMMU_ROT_PHYS + MSM_IOMMU_ROT_SIZE - 1,
+ .name = "physbase",
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "nonsecure_irq",
+ .start = SMMU_ROT_CB_SC_NON_SECURE_IRQ,
+ .end = SMMU_ROT_CB_SC_NON_SECURE_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "secure_irq",
+ .start = SMMU_ROT_CB_SC_SECURE_IRQ,
+ .end = SMMU_ROT_CB_SC_SECURE_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource msm_iommu_ijpeg_resources[] = {
+ {
+ .start = MSM_IOMMU_IJPEG_PHYS,
+ .end = MSM_IOMMU_IJPEG_PHYS + MSM_IOMMU_IJPEG_SIZE - 1,
+ .name = "physbase",
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "nonsecure_irq",
+ .start = SMMU_IJPEG_CB_SC_NON_SECURE_IRQ,
+ .end = SMMU_IJPEG_CB_SC_NON_SECURE_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "secure_irq",
+ .start = SMMU_IJPEG_CB_SC_SECURE_IRQ,
+ .end = SMMU_IJPEG_CB_SC_SECURE_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource msm_iommu_vfe_resources[] = {
+ {
+ .start = MSM_IOMMU_VFE_PHYS,
+ .end = MSM_IOMMU_VFE_PHYS + MSM_IOMMU_VFE_SIZE - 1,
+ .name = "physbase",
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "nonsecure_irq",
+ .start = SMMU_VFE_CB_SC_NON_SECURE_IRQ,
+ .end = SMMU_VFE_CB_SC_NON_SECURE_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "secure_irq",
+ .start = SMMU_VFE_CB_SC_SECURE_IRQ,
+ .end = SMMU_VFE_CB_SC_SECURE_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource msm_iommu_vcodec_a_resources[] = {
+ {
+ .start = MSM_IOMMU_VCODEC_A_PHYS,
+ .end = MSM_IOMMU_VCODEC_A_PHYS + MSM_IOMMU_VCODEC_A_SIZE - 1,
+ .name = "physbase",
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "nonsecure_irq",
+ .start = SMMU_VCODEC_A_CB_SC_NON_SECURE_IRQ,
+ .end = SMMU_VCODEC_A_CB_SC_NON_SECURE_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "secure_irq",
+ .start = SMMU_VCODEC_A_CB_SC_SECURE_IRQ,
+ .end = SMMU_VCODEC_A_CB_SC_SECURE_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource msm_iommu_vcodec_b_resources[] = {
+ {
+ .start = MSM_IOMMU_VCODEC_B_PHYS,
+ .end = MSM_IOMMU_VCODEC_B_PHYS + MSM_IOMMU_VCODEC_B_SIZE - 1,
+ .name = "physbase",
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "nonsecure_irq",
+ .start = SMMU_VCODEC_B_CB_SC_NON_SECURE_IRQ,
+ .end = SMMU_VCODEC_B_CB_SC_NON_SECURE_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "secure_irq",
+ .start = SMMU_VCODEC_B_CB_SC_SECURE_IRQ,
+ .end = SMMU_VCODEC_B_CB_SC_SECURE_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource msm_iommu_gfx3d_resources[] = {
+ {
+ .start = MSM_IOMMU_GFX3D_PHYS,
+ .end = MSM_IOMMU_GFX3D_PHYS + MSM_IOMMU_GFX3D_SIZE - 1,
+ .name = "physbase",
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "nonsecure_irq",
+ .start = SMMU_GFX3D_CB_SC_NON_SECURE_IRQ,
+ .end = SMMU_GFX3D_CB_SC_NON_SECURE_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "secure_irq",
+ .start = SMMU_GFX3D_CB_SC_SECURE_IRQ,
+ .end = SMMU_GFX3D_CB_SC_SECURE_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource msm_iommu_gfx2d0_resources[] = {
+ {
+ .start = MSM_IOMMU_GFX2D0_PHYS,
+ .end = MSM_IOMMU_GFX2D0_PHYS + MSM_IOMMU_GFX2D0_SIZE - 1,
+ .name = "physbase",
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "nonsecure_irq",
+ .start = SMMU_GFX2D0_CB_SC_NON_SECURE_IRQ,
+ .end = SMMU_GFX2D0_CB_SC_NON_SECURE_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "secure_irq",
+ .start = SMMU_GFX2D0_CB_SC_SECURE_IRQ,
+ .end = SMMU_GFX2D0_CB_SC_SECURE_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device msm_root_iommu_dev = {
+ .name = "msm_iommu",
+ .id = -1,
+};
+
+static struct msm_iommu_dev jpegd_smmu = {
+ .name = "jpegd",
+ .clk_rate = -1
+};
+
+static struct msm_iommu_dev vpe_smmu = {
+ .name = "vpe"
+};
+
+static struct msm_iommu_dev mdp0_smmu = {
+ .name = "mdp0"
+};
+
+static struct msm_iommu_dev mdp1_smmu = {
+ .name = "mdp1"
+};
+
+static struct msm_iommu_dev rot_smmu = {
+ .name = "rot"
+};
+
+static struct msm_iommu_dev ijpeg_smmu = {
+ .name = "ijpeg"
+};
+
+static struct msm_iommu_dev vfe_smmu = {
+ .name = "vfe",
+ .clk_rate = -1
+};
+
+static struct msm_iommu_dev vcodec_a_smmu = {
+ .name = "vcodec_a"
+};
+
+static struct msm_iommu_dev vcodec_b_smmu = {
+ .name = "vcodec_b"
+};
+
+static struct msm_iommu_dev gfx3d_smmu = {
+ .name = "gfx3d",
+ .clk_rate = 27000000
+};
+
+static struct msm_iommu_dev gfx2d0_smmu = {
+ .name = "gfx2d0",
+ .clk_rate = 27000000
+};
+
+static struct platform_device msm_device_smmu_jpegd = {
+ .name = "msm_iommu",
+ .id = 0,
+ .dev = {
+ .parent = &msm_root_iommu_dev.dev,
+ },
+ .num_resources = ARRAY_SIZE(msm_iommu_jpegd_resources),
+ .resource = msm_iommu_jpegd_resources,
+};
+
+static struct platform_device msm_device_smmu_vpe = {
+ .name = "msm_iommu",
+ .id = 1,
+ .dev = {
+ .parent = &msm_root_iommu_dev.dev,
+ },
+ .num_resources = ARRAY_SIZE(msm_iommu_vpe_resources),
+ .resource = msm_iommu_vpe_resources,
+};
+
+static struct platform_device msm_device_smmu_mdp0 = {
+ .name = "msm_iommu",
+ .id = 2,
+ .dev = {
+ .parent = &msm_root_iommu_dev.dev,
+ },
+ .num_resources = ARRAY_SIZE(msm_iommu_mdp0_resources),
+ .resource = msm_iommu_mdp0_resources,
+};
+
+static struct platform_device msm_device_smmu_mdp1 = {
+ .name = "msm_iommu",
+ .id = 3,
+ .dev = {
+ .parent = &msm_root_iommu_dev.dev,
+ },
+ .num_resources = ARRAY_SIZE(msm_iommu_mdp1_resources),
+ .resource = msm_iommu_mdp1_resources,
+};
+
+static struct platform_device msm_device_smmu_rot = {
+ .name = "msm_iommu",
+ .id = 4,
+ .dev = {
+ .parent = &msm_root_iommu_dev.dev,
+ },
+ .num_resources = ARRAY_SIZE(msm_iommu_rot_resources),
+ .resource = msm_iommu_rot_resources,
+};
+
+static struct platform_device msm_device_smmu_ijpeg = {
+ .name = "msm_iommu",
+ .id = 5,
+ .dev = {
+ .parent = &msm_root_iommu_dev.dev,
+ },
+ .num_resources = ARRAY_SIZE(msm_iommu_ijpeg_resources),
+ .resource = msm_iommu_ijpeg_resources,
+};
+
+static struct platform_device msm_device_smmu_vfe = {
+ .name = "msm_iommu",
+ .id = 6,
+ .dev = {
+ .parent = &msm_root_iommu_dev.dev,
+ },
+ .num_resources = ARRAY_SIZE(msm_iommu_vfe_resources),
+ .resource = msm_iommu_vfe_resources,
+};
+
+static struct platform_device msm_device_smmu_vcodec_a = {
+ .name = "msm_iommu",
+ .id = 7,
+ .dev = {
+ .parent = &msm_root_iommu_dev.dev,
+ },
+ .num_resources = ARRAY_SIZE(msm_iommu_vcodec_a_resources),
+ .resource = msm_iommu_vcodec_a_resources,
+};
+
+static struct platform_device msm_device_smmu_vcodec_b = {
+ .name = "msm_iommu",
+ .id = 8,
+ .dev = {
+ .parent = &msm_root_iommu_dev.dev,
+ },
+ .num_resources = ARRAY_SIZE(msm_iommu_vcodec_b_resources),
+ .resource = msm_iommu_vcodec_b_resources,
+};
+
+static struct platform_device msm_device_smmu_gfx3d = {
+ .name = "msm_iommu",
+ .id = 9,
+ .dev = {
+ .parent = &msm_root_iommu_dev.dev,
+ },
+ .num_resources = ARRAY_SIZE(msm_iommu_gfx3d_resources),
+ .resource = msm_iommu_gfx3d_resources,
+};
+
+static struct platform_device msm_device_smmu_gfx2d0 = {
+ .name = "msm_iommu",
+ .id = 10,
+ .dev = {
+ .parent = &msm_root_iommu_dev.dev,
+ },
+ .num_resources = ARRAY_SIZE(msm_iommu_gfx2d0_resources),
+ .resource = msm_iommu_gfx2d0_resources,
+};
+
+static struct msm_iommu_ctx_dev jpegd_src_ctx = {
+ .name = "jpegd_src",
+ .num = 0,
+ .mids = {0, -1}
+};
+
+static struct msm_iommu_ctx_dev jpegd_dst_ctx = {
+ .name = "jpegd_dst",
+ .num = 1,
+ .mids = {1, -1}
+};
+
+static struct msm_iommu_ctx_dev vpe_src_ctx = {
+ .name = "vpe_src",
+ .num = 0,
+ .mids = {0, -1}
+};
+
+static struct msm_iommu_ctx_dev vpe_dst_ctx = {
+ .name = "vpe_dst",
+ .num = 1,
+ .mids = {1, -1}
+};
+
+static struct msm_iommu_ctx_dev mdp_vg1_ctx = {
+ .name = "mdp_vg1",
+ .num = 0,
+ .mids = {0, 2, -1}
+};
+
+static struct msm_iommu_ctx_dev mdp_rgb1_ctx = {
+ .name = "mdp_rgb1",
+ .num = 1,
+ .mids = {1, 3, 4, 5, 6, 7, 8, 9, 10, -1}
+};
+
+static struct msm_iommu_ctx_dev mdp_vg2_ctx = {
+ .name = "mdp_vg2",
+ .num = 0,
+ .mids = {0, 2, -1}
+};
+
+static struct msm_iommu_ctx_dev mdp_rgb2_ctx = {
+ .name = "mdp_rgb2",
+ .num = 1,
+ .mids = {1, 3, 4, 5, 6, 7, 8, 9, 10, -1}
+};
+
+static struct msm_iommu_ctx_dev rot_src_ctx = {
+ .name = "rot_src",
+ .num = 0,
+ .mids = {0, -1}
+};
+
+static struct msm_iommu_ctx_dev rot_dst_ctx = {
+ .name = "rot_dst",
+ .num = 1,
+ .mids = {1, -1}
+};
+
+static struct msm_iommu_ctx_dev ijpeg_src_ctx = {
+ .name = "ijpeg_src",
+ .num = 0,
+ .mids = {0, -1}
+};
+
+static struct msm_iommu_ctx_dev ijpeg_dst_ctx = {
+ .name = "ijpeg_dst",
+ .num = 1,
+ .mids = {1, -1}
+};
+
+static struct msm_iommu_ctx_dev vfe_imgwr_ctx = {
+ .name = "vfe_imgwr",
+ .num = 0,
+ .mids = {2, 3, 4, 5, 6, 7, 8, -1}
+};
+
+static struct msm_iommu_ctx_dev vfe_misc_ctx = {
+ .name = "vfe_misc",
+ .num = 1,
+ .mids = {0, 1, 9, -1}
+};
+
+static struct msm_iommu_ctx_dev vcodec_a_stream_ctx = {
+ .name = "vcodec_a_stream",
+ .num = 0,
+ .mids = {2, 5, -1}
+};
+
+static struct msm_iommu_ctx_dev vcodec_a_mm1_ctx = {
+ .name = "vcodec_a_mm1",
+ .num = 1,
+ .mids = {0, 1, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, -1}
+};
+
+static struct msm_iommu_ctx_dev vcodec_b_mm2_ctx = {
+ .name = "vcodec_b_mm2",
+ .num = 0,
+ .mids = {0, 1, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, -1}
+};
+
+static struct msm_iommu_ctx_dev gfx3d_rbpa_ctx = {
+ .name = "gfx3d_rbpa",
+ .num = 0,
+ .mids = {-1}
+};
+
+static struct msm_iommu_ctx_dev gfx3d_cpvgttc_ctx = {
+ .name = "gfx3d_cpvgttc",
+ .num = 1,
+ .mids = {0, 1, 2, 3, 4, 5, 6, 7, -1}
+};
+
+static struct msm_iommu_ctx_dev gfx3d_smmu_ctx = {
+ .name = "gfx3d_smmu",
+ .num = 2,
+ .mids = {8, 9, 10, 11, 12, -1}
+};
+
+static struct msm_iommu_ctx_dev gfx2d0_pixv1_ctx = {
+ .name = "gfx2d0_pixv1_smmu",
+ .num = 0,
+ .mids = {0, 3, 4, -1}
+};
+
+static struct msm_iommu_ctx_dev gfx2d0_texv3_ctx = {
+ .name = "gfx2d0_texv3_smmu",
+ .num = 1,
+ .mids = {1, 6, 7, -1}
+};
+
+static struct platform_device msm_device_jpegd_src_ctx = {
+ .name = "msm_iommu_ctx",
+ .id = 0,
+ .dev = {
+ .parent = &msm_device_smmu_jpegd.dev,
+ },
+};
+
+static struct platform_device msm_device_jpegd_dst_ctx = {
+ .name = "msm_iommu_ctx",
+ .id = 1,
+ .dev = {
+ .parent = &msm_device_smmu_jpegd.dev,
+ },
+};
+
+static struct platform_device msm_device_vpe_src_ctx = {
+ .name = "msm_iommu_ctx",
+ .id = 2,
+ .dev = {
+ .parent = &msm_device_smmu_vpe.dev,
+ },
+};
+
+static struct platform_device msm_device_vpe_dst_ctx = {
+ .name = "msm_iommu_ctx",
+ .id = 3,
+ .dev = {
+ .parent = &msm_device_smmu_vpe.dev,
+ },
+};
+
+static struct platform_device msm_device_mdp_vg1_ctx = {
+ .name = "msm_iommu_ctx",
+ .id = 4,
+ .dev = {
+ .parent = &msm_device_smmu_mdp0.dev,
+ },
+};
+
+static struct platform_device msm_device_mdp_rgb1_ctx = {
+ .name = "msm_iommu_ctx",
+ .id = 5,
+ .dev = {
+ .parent = &msm_device_smmu_mdp0.dev,
+ },
+};
+
+static struct platform_device msm_device_mdp_vg2_ctx = {
+ .name = "msm_iommu_ctx",
+ .id = 6,
+ .dev = {
+ .parent = &msm_device_smmu_mdp1.dev,
+ },
+};
+
+static struct platform_device msm_device_mdp_rgb2_ctx = {
+ .name = "msm_iommu_ctx",
+ .id = 7,
+ .dev = {
+ .parent = &msm_device_smmu_mdp1.dev,
+ },
+};
+
+static struct platform_device msm_device_rot_src_ctx = {
+ .name = "msm_iommu_ctx",
+ .id = 8,
+ .dev = {
+ .parent = &msm_device_smmu_rot.dev,
+ },
+};
+
+static struct platform_device msm_device_rot_dst_ctx = {
+ .name = "msm_iommu_ctx",
+ .id = 9,
+ .dev = {
+ .parent = &msm_device_smmu_rot.dev,
+ },
+};
+
+static struct platform_device msm_device_ijpeg_src_ctx = {
+ .name = "msm_iommu_ctx",
+ .id = 10,
+ .dev = {
+ .parent = &msm_device_smmu_ijpeg.dev,
+ },
+};
+
+static struct platform_device msm_device_ijpeg_dst_ctx = {
+ .name = "msm_iommu_ctx",
+ .id = 11,
+ .dev = {
+ .parent = &msm_device_smmu_ijpeg.dev,
+ },
+};
+
+static struct platform_device msm_device_vfe_imgwr_ctx = {
+ .name = "msm_iommu_ctx",
+ .id = 12,
+ .dev = {
+ .parent = &msm_device_smmu_vfe.dev,
+ },
+};
+
+static struct platform_device msm_device_vfe_misc_ctx = {
+ .name = "msm_iommu_ctx",
+ .id = 13,
+ .dev = {
+ .parent = &msm_device_smmu_vfe.dev,
+ },
+};
+
+static struct platform_device msm_device_vcodec_a_stream_ctx = {
+ .name = "msm_iommu_ctx",
+ .id = 14,
+ .dev = {
+ .parent = &msm_device_smmu_vcodec_a.dev,
+ },
+};
+
+static struct platform_device msm_device_vcodec_a_mm1_ctx = {
+ .name = "msm_iommu_ctx",
+ .id = 15,
+ .dev = {
+ .parent = &msm_device_smmu_vcodec_a.dev,
+ },
+};
+
+static struct platform_device msm_device_vcodec_b_mm2_ctx = {
+ .name = "msm_iommu_ctx",
+ .id = 16,
+ .dev = {
+ .parent = &msm_device_smmu_vcodec_b.dev,
+ },
+};
+
+static struct platform_device msm_device_gfx3d_rbpa_ctx = {
+ .name = "msm_iommu_ctx",
+ .id = 17,
+ .dev = {
+ .parent = &msm_device_smmu_gfx3d.dev,
+ },
+};
+
+static struct platform_device msm_device_gfx3d_cpvgttc_ctx = {
+ .name = "msm_iommu_ctx",
+ .id = 18,
+ .dev = {
+ .parent = &msm_device_smmu_gfx3d.dev,
+ },
+};
+
+static struct platform_device msm_device_gfx3d_smmu_ctx = {
+ .name = "msm_iommu_ctx",
+ .id = 19,
+ .dev = {
+ .parent = &msm_device_smmu_gfx3d.dev,
+ },
+};
+
+static struct platform_device msm_device_gfx2d0_pixv1_ctx = {
+ .name = "msm_iommu_ctx",
+ .id = 20,
+ .dev = {
+ .parent = &msm_device_smmu_gfx2d0.dev,
+ },
+};
+
+static struct platform_device msm_device_gfx2d0_texv3_ctx = {
+ .name = "msm_iommu_ctx",
+ .id = 21,
+ .dev = {
+ .parent = &msm_device_smmu_gfx2d0.dev,
+ },
+};
+
+static struct platform_device *msm_iommu_devs[] = {
+ &msm_device_smmu_jpegd,
+ &msm_device_smmu_vpe,
+ &msm_device_smmu_mdp0,
+ &msm_device_smmu_mdp1,
+ &msm_device_smmu_rot,
+ &msm_device_smmu_ijpeg,
+ &msm_device_smmu_vfe,
+ &msm_device_smmu_vcodec_a,
+ &msm_device_smmu_vcodec_b,
+ &msm_device_smmu_gfx3d,
+ &msm_device_smmu_gfx2d0,
+};
+
+static struct msm_iommu_dev *msm_iommu_data[] = {
+ &jpegd_smmu,
+ &vpe_smmu,
+ &mdp0_smmu,
+ &mdp1_smmu,
+ &rot_smmu,
+ &ijpeg_smmu,
+ &vfe_smmu,
+ &vcodec_a_smmu,
+ &vcodec_b_smmu,
+ &gfx3d_smmu,
+ &gfx2d0_smmu,
+};
+
+static struct platform_device *msm_iommu_ctx_devs[] = {
+ &msm_device_jpegd_src_ctx,
+ &msm_device_jpegd_dst_ctx,
+ &msm_device_vpe_src_ctx,
+ &msm_device_vpe_dst_ctx,
+ &msm_device_mdp_vg1_ctx,
+ &msm_device_mdp_rgb1_ctx,
+ &msm_device_mdp_vg2_ctx,
+ &msm_device_mdp_rgb2_ctx,
+ &msm_device_rot_src_ctx,
+ &msm_device_rot_dst_ctx,
+ &msm_device_ijpeg_src_ctx,
+ &msm_device_ijpeg_dst_ctx,
+ &msm_device_vfe_imgwr_ctx,
+ &msm_device_vfe_misc_ctx,
+ &msm_device_vcodec_a_stream_ctx,
+ &msm_device_vcodec_a_mm1_ctx,
+ &msm_device_vcodec_b_mm2_ctx,
+ &msm_device_gfx3d_rbpa_ctx,
+ &msm_device_gfx3d_cpvgttc_ctx,
+ &msm_device_gfx3d_smmu_ctx,
+ &msm_device_gfx2d0_pixv1_ctx,
+ &msm_device_gfx2d0_texv3_ctx,
+};
+
+static struct msm_iommu_ctx_dev *msm_iommu_ctx_data[] = {
+ &jpegd_src_ctx,
+ &jpegd_dst_ctx,
+ &vpe_src_ctx,
+ &vpe_dst_ctx,
+ &mdp_vg1_ctx,
+ &mdp_rgb1_ctx,
+ &mdp_vg2_ctx,
+ &mdp_rgb2_ctx,
+ &rot_src_ctx,
+ &rot_dst_ctx,
+ &ijpeg_src_ctx,
+ &ijpeg_dst_ctx,
+ &vfe_imgwr_ctx,
+ &vfe_misc_ctx,
+ &vcodec_a_stream_ctx,
+ &vcodec_a_mm1_ctx,
+ &vcodec_b_mm2_ctx,
+ &gfx3d_rbpa_ctx,
+ &gfx3d_cpvgttc_ctx,
+ &gfx3d_smmu_ctx,
+ &gfx2d0_pixv1_ctx,
+ &gfx2d0_texv3_ctx,
+};
+
+static int msm8x60_iommu_init(void)
+{
+ int ret, i;
+
+ ret = platform_device_register(&msm_root_iommu_dev);
+ if (ret != 0) {
+ pr_err("Failed to register root IOMMU device!\n");
+ goto failure;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(msm_iommu_devs); i++) {
+ ret = platform_device_add_data(msm_iommu_devs[i],
+ msm_iommu_data[i],
+ sizeof(struct msm_iommu_dev));
+ if (ret != 0) {
+ pr_err("platform_device_add_data failed, "
+ "i = %d\n", i);
+ goto failure_unwind;
+ }
+
+ ret = platform_device_register(msm_iommu_devs[i]);
+
+ if (ret != 0) {
+ pr_err("platform_device_register smmu failed, "
+ "i = %d\n", i);
+ goto failure_unwind;
+ }
+ }
+
+ for (i = 0; i < ARRAY_SIZE(msm_iommu_ctx_devs); i++) {
+ ret = platform_device_add_data(msm_iommu_ctx_devs[i],
+ msm_iommu_ctx_data[i],
+ sizeof(*msm_iommu_ctx_devs[i]));
+ if (ret != 0) {
+ pr_err("platform_device_add_data smmu failed, "
+ "i = %d\n", i);
+ goto failure_unwind2;
+ }
+
+ ret = platform_device_register(msm_iommu_ctx_devs[i]);
+ if (ret != 0) {
+ pr_err("platform_device_register ctx failed, "
+ "i = %d\n", i);
+ goto failure_unwind2;
+ }
+ }
+ return 0;
+
+failure_unwind2:
+ while (--i >= 0)
+ platform_device_unregister(msm_iommu_ctx_devs[i]);
+failure_unwind:
+ while (--i >= 0)
+ platform_device_unregister(msm_iommu_devs[i]);
+
+ platform_device_unregister(&msm_root_iommu_dev);
+failure:
+ return ret;
+}
+
+static void msm8x60_iommu_exit(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(msm_iommu_ctx_devs); i++)
+ platform_device_unregister(msm_iommu_ctx_devs[i]);
+
+ for (i = 0; i < ARRAY_SIZE(msm_iommu_devs); ++i)
+ platform_device_unregister(msm_iommu_devs[i]);
+
+ platform_device_unregister(&msm_root_iommu_dev);
+}
+
+subsys_initcall(msm8x60_iommu_init);
+module_exit(msm8x60_iommu_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Stepan Moskovchenko <stepanm@codeaurora.org>");
diff --git a/arch/arm/mach-msm/devices-qsd8x50.c b/arch/arm/mach-msm/devices-qsd8x50.c
index 4d4a507..6fe67c5 100644
--- a/arch/arm/mach-msm/devices-qsd8x50.c
+++ b/arch/arm/mach-msm/devices-qsd8x50.c
@@ -48,6 +48,11 @@
.resource = resources_uart3,
};
+struct platform_device msm_device_smd = {
+ .name = "msm_smd",
+ .id = -1,
+};
+
struct clk msm_clocks_8x50[] = {
CLK_PCOM("adm_clk", ADM_CLK, NULL, 0),
CLK_PCOM("ebi1_clk", EBI1_CLK, NULL, CLK_MIN),
diff --git a/arch/arm/mach-msm/gpio.c b/arch/arm/mach-msm/gpio.c
index bc32c84..33051b5 100644
--- a/arch/arm/mach-msm/gpio.c
+++ b/arch/arm/mach-msm/gpio.c
@@ -1,7 +1,7 @@
/* linux/arch/arm/mach-msm/gpio.c
*
* Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
@@ -14,72 +14,363 @@
*
*/
+#include <linux/bitops.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
#include <linux/module.h>
-#include <mach/gpio.h>
-#include "proc_comm.h"
+#include "gpio_hw.h"
+#include "gpiomux.h"
-int gpio_tlmm_config(unsigned config, unsigned disable)
-{
- return msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &config, &disable);
-}
-EXPORT_SYMBOL(gpio_tlmm_config);
+#define FIRST_GPIO_IRQ MSM_GPIO_TO_INT(0)
-int msm_gpios_enable(const struct msm_gpio *table, int size)
-{
- int rc;
- int i;
- const struct msm_gpio *g;
- for (i = 0; i < size; i++) {
- g = table + i;
- rc = gpio_tlmm_config(g->gpio_cfg, GPIO_ENABLE);
- if (rc) {
- pr_err("gpio_tlmm_config(0x%08x, GPIO_ENABLE)"
- " <%s> failed: %d\n",
- g->gpio_cfg, g->label ?: "?", rc);
- pr_err("pin %d func %d dir %d pull %d drvstr %d\n",
- GPIO_PIN(g->gpio_cfg), GPIO_FUNC(g->gpio_cfg),
- GPIO_DIR(g->gpio_cfg), GPIO_PULL(g->gpio_cfg),
- GPIO_DRVSTR(g->gpio_cfg));
- goto err;
- }
+#define MSM_GPIO_BANK(bank, first, last) \
+ { \
+ .regs = { \
+ .out = MSM_GPIO_OUT_##bank, \
+ .in = MSM_GPIO_IN_##bank, \
+ .int_status = MSM_GPIO_INT_STATUS_##bank, \
+ .int_clear = MSM_GPIO_INT_CLEAR_##bank, \
+ .int_en = MSM_GPIO_INT_EN_##bank, \
+ .int_edge = MSM_GPIO_INT_EDGE_##bank, \
+ .int_pos = MSM_GPIO_INT_POS_##bank, \
+ .oe = MSM_GPIO_OE_##bank, \
+ }, \
+ .chip = { \
+ .base = (first), \
+ .ngpio = (last) - (first) + 1, \
+ .get = msm_gpio_get, \
+ .set = msm_gpio_set, \
+ .direction_input = msm_gpio_direction_input, \
+ .direction_output = msm_gpio_direction_output, \
+ .to_irq = msm_gpio_to_irq, \
+ .request = msm_gpio_request, \
+ .free = msm_gpio_free, \
+ } \
}
+
+#define MSM_GPIO_BROKEN_INT_CLEAR 1
+
+struct msm_gpio_regs {
+ void __iomem *out;
+ void __iomem *in;
+ void __iomem *int_status;
+ void __iomem *int_clear;
+ void __iomem *int_en;
+ void __iomem *int_edge;
+ void __iomem *int_pos;
+ void __iomem *oe;
+};
+
+struct msm_gpio_chip {
+ spinlock_t lock;
+ struct gpio_chip chip;
+ struct msm_gpio_regs regs;
+#if MSM_GPIO_BROKEN_INT_CLEAR
+ unsigned int_status_copy;
+#endif
+ unsigned int both_edge_detect;
+ unsigned int int_enable[2]; /* 0: awake, 1: sleep */
+};
+
+static int msm_gpio_write(struct msm_gpio_chip *msm_chip,
+ unsigned offset, unsigned on)
+{
+ unsigned mask = BIT(offset);
+ unsigned val;
+
+ val = readl(msm_chip->regs.out);
+ if (on)
+ writel(val | mask, msm_chip->regs.out);
+ else
+ writel(val & ~mask, msm_chip->regs.out);
return 0;
-err:
- msm_gpios_disable(table, i);
- return rc;
}
-EXPORT_SYMBOL(msm_gpios_enable);
-void msm_gpios_disable(const struct msm_gpio *table, int size)
+static void msm_gpio_update_both_edge_detect(struct msm_gpio_chip *msm_chip)
{
- int rc;
- int i;
- const struct msm_gpio *g;
- for (i = size-1; i >= 0; i--) {
- g = table + i;
- rc = gpio_tlmm_config(g->gpio_cfg, GPIO_DISABLE);
- if (rc) {
- pr_err("gpio_tlmm_config(0x%08x, GPIO_DISABLE)"
- " <%s> failed: %d\n",
- g->gpio_cfg, g->label ?: "?", rc);
- pr_err("pin %d func %d dir %d pull %d drvstr %d\n",
- GPIO_PIN(g->gpio_cfg), GPIO_FUNC(g->gpio_cfg),
- GPIO_DIR(g->gpio_cfg), GPIO_PULL(g->gpio_cfg),
- GPIO_DRVSTR(g->gpio_cfg));
+ int loop_limit = 100;
+ unsigned pol, val, val2, intstat;
+ do {
+ val = readl(msm_chip->regs.in);
+ pol = readl(msm_chip->regs.int_pos);
+ pol = (pol & ~msm_chip->both_edge_detect) |
+ (~val & msm_chip->both_edge_detect);
+ writel(pol, msm_chip->regs.int_pos);
+ intstat = readl(msm_chip->regs.int_status);
+ val2 = readl(msm_chip->regs.in);
+ if (((val ^ val2) & msm_chip->both_edge_detect & ~intstat) == 0)
+ return;
+ } while (loop_limit-- > 0);
+ printk(KERN_ERR "msm_gpio_update_both_edge_detect, "
+ "failed to reach stable state %x != %x\n", val, val2);
+}
+
+static int msm_gpio_clear_detect_status(struct msm_gpio_chip *msm_chip,
+ unsigned offset)
+{
+ unsigned bit = BIT(offset);
+
+#if MSM_GPIO_BROKEN_INT_CLEAR
+ /* Save interrupts that already triggered before we loose them. */
+ /* Any interrupt that triggers between the read of int_status */
+ /* and the write to int_clear will still be lost though. */
+ msm_chip->int_status_copy |= readl(msm_chip->regs.int_status);
+ msm_chip->int_status_copy &= ~bit;
+#endif
+ writel(bit, msm_chip->regs.int_clear);
+ msm_gpio_update_both_edge_detect(msm_chip);
+ return 0;
+}
+
+static int msm_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct msm_gpio_chip *msm_chip;
+ unsigned long irq_flags;
+
+ msm_chip = container_of(chip, struct msm_gpio_chip, chip);
+ spin_lock_irqsave(&msm_chip->lock, irq_flags);
+ writel(readl(msm_chip->regs.oe) & ~BIT(offset), msm_chip->regs.oe);
+ spin_unlock_irqrestore(&msm_chip->lock, irq_flags);
+ return 0;
+}
+
+static int
+msm_gpio_direction_output(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct msm_gpio_chip *msm_chip;
+ unsigned long irq_flags;
+
+ msm_chip = container_of(chip, struct msm_gpio_chip, chip);
+ spin_lock_irqsave(&msm_chip->lock, irq_flags);
+ msm_gpio_write(msm_chip, offset, value);
+ writel(readl(msm_chip->regs.oe) | BIT(offset), msm_chip->regs.oe);
+ spin_unlock_irqrestore(&msm_chip->lock, irq_flags);
+ return 0;
+}
+
+static int msm_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct msm_gpio_chip *msm_chip;
+
+ msm_chip = container_of(chip, struct msm_gpio_chip, chip);
+ return (readl(msm_chip->regs.in) & (1U << offset)) ? 1 : 0;
+}
+
+static void msm_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct msm_gpio_chip *msm_chip;
+ unsigned long irq_flags;
+
+ msm_chip = container_of(chip, struct msm_gpio_chip, chip);
+ spin_lock_irqsave(&msm_chip->lock, irq_flags);
+ msm_gpio_write(msm_chip, offset, value);
+ spin_unlock_irqrestore(&msm_chip->lock, irq_flags);
+}
+
+static int msm_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ return MSM_GPIO_TO_INT(chip->base + offset);
+}
+
+#ifdef CONFIG_MSM_GPIOMUX
+static int msm_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+ return msm_gpiomux_get(chip->base + offset);
+}
+
+static void msm_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+ msm_gpiomux_put(chip->base + offset);
+}
+#else
+#define msm_gpio_request NULL
+#define msm_gpio_free NULL
+#endif
+
+struct msm_gpio_chip msm_gpio_chips[] = {
+#if defined(CONFIG_ARCH_MSM7X00A)
+ MSM_GPIO_BANK(0, 0, 15),
+ MSM_GPIO_BANK(1, 16, 42),
+ MSM_GPIO_BANK(2, 43, 67),
+ MSM_GPIO_BANK(3, 68, 94),
+ MSM_GPIO_BANK(4, 95, 106),
+ MSM_GPIO_BANK(5, 107, 121),
+#elif defined(CONFIG_ARCH_MSM7X25) || defined(CONFIG_ARCH_MSM7X27)
+ MSM_GPIO_BANK(0, 0, 15),
+ MSM_GPIO_BANK(1, 16, 42),
+ MSM_GPIO_BANK(2, 43, 67),
+ MSM_GPIO_BANK(3, 68, 94),
+ MSM_GPIO_BANK(4, 95, 106),
+ MSM_GPIO_BANK(5, 107, 132),
+#elif defined(CONFIG_ARCH_MSM7X30)
+ MSM_GPIO_BANK(0, 0, 15),
+ MSM_GPIO_BANK(1, 16, 43),
+ MSM_GPIO_BANK(2, 44, 67),
+ MSM_GPIO_BANK(3, 68, 94),
+ MSM_GPIO_BANK(4, 95, 106),
+ MSM_GPIO_BANK(5, 107, 133),
+ MSM_GPIO_BANK(6, 134, 150),
+ MSM_GPIO_BANK(7, 151, 181),
+#elif defined(CONFIG_ARCH_QSD8X50)
+ MSM_GPIO_BANK(0, 0, 15),
+ MSM_GPIO_BANK(1, 16, 42),
+ MSM_GPIO_BANK(2, 43, 67),
+ MSM_GPIO_BANK(3, 68, 94),
+ MSM_GPIO_BANK(4, 95, 103),
+ MSM_GPIO_BANK(5, 104, 121),
+ MSM_GPIO_BANK(6, 122, 152),
+ MSM_GPIO_BANK(7, 153, 164),
+#endif
+};
+
+static void msm_gpio_irq_ack(unsigned int irq)
+{
+ unsigned long irq_flags;
+ struct msm_gpio_chip *msm_chip = get_irq_chip_data(irq);
+ spin_lock_irqsave(&msm_chip->lock, irq_flags);
+ msm_gpio_clear_detect_status(msm_chip,
+ irq - gpio_to_irq(msm_chip->chip.base));
+ spin_unlock_irqrestore(&msm_chip->lock, irq_flags);
+}
+
+static void msm_gpio_irq_mask(unsigned int irq)
+{
+ unsigned long irq_flags;
+ struct msm_gpio_chip *msm_chip = get_irq_chip_data(irq);
+ unsigned offset = irq - gpio_to_irq(msm_chip->chip.base);
+
+ spin_lock_irqsave(&msm_chip->lock, irq_flags);
+ /* level triggered interrupts are also latched */
+ if (!(readl(msm_chip->regs.int_edge) & BIT(offset)))
+ msm_gpio_clear_detect_status(msm_chip, offset);
+ msm_chip->int_enable[0] &= ~BIT(offset);
+ writel(msm_chip->int_enable[0], msm_chip->regs.int_en);
+ spin_unlock_irqrestore(&msm_chip->lock, irq_flags);
+}
+
+static void msm_gpio_irq_unmask(unsigned int irq)
+{
+ unsigned long irq_flags;
+ struct msm_gpio_chip *msm_chip = get_irq_chip_data(irq);
+ unsigned offset = irq - gpio_to_irq(msm_chip->chip.base);
+
+ spin_lock_irqsave(&msm_chip->lock, irq_flags);
+ /* level triggered interrupts are also latched */
+ if (!(readl(msm_chip->regs.int_edge) & BIT(offset)))
+ msm_gpio_clear_detect_status(msm_chip, offset);
+ msm_chip->int_enable[0] |= BIT(offset);
+ writel(msm_chip->int_enable[0], msm_chip->regs.int_en);
+ spin_unlock_irqrestore(&msm_chip->lock, irq_flags);
+}
+
+static int msm_gpio_irq_set_wake(unsigned int irq, unsigned int on)
+{
+ unsigned long irq_flags;
+ struct msm_gpio_chip *msm_chip = get_irq_chip_data(irq);
+ unsigned offset = irq - gpio_to_irq(msm_chip->chip.base);
+
+ spin_lock_irqsave(&msm_chip->lock, irq_flags);
+
+ if (on)
+ msm_chip->int_enable[1] |= BIT(offset);
+ else
+ msm_chip->int_enable[1] &= ~BIT(offset);
+
+ spin_unlock_irqrestore(&msm_chip->lock, irq_flags);
+ return 0;
+}
+
+static int msm_gpio_irq_set_type(unsigned int irq, unsigned int flow_type)
+{
+ unsigned long irq_flags;
+ struct msm_gpio_chip *msm_chip = get_irq_chip_data(irq);
+ unsigned offset = irq - gpio_to_irq(msm_chip->chip.base);
+ unsigned val, mask = BIT(offset);
+
+ spin_lock_irqsave(&msm_chip->lock, irq_flags);
+ val = readl(msm_chip->regs.int_edge);
+ if (flow_type & IRQ_TYPE_EDGE_BOTH) {
+ writel(val | mask, msm_chip->regs.int_edge);
+ irq_desc[irq].handle_irq = handle_edge_irq;
+ } else {
+ writel(val & ~mask, msm_chip->regs.int_edge);
+ irq_desc[irq].handle_irq = handle_level_irq;
+ }
+ if ((flow_type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) {
+ msm_chip->both_edge_detect |= mask;
+ msm_gpio_update_both_edge_detect(msm_chip);
+ } else {
+ msm_chip->both_edge_detect &= ~mask;
+ val = readl(msm_chip->regs.int_pos);
+ if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_HIGH))
+ writel(val | mask, msm_chip->regs.int_pos);
+ else
+ writel(val & ~mask, msm_chip->regs.int_pos);
+ }
+ spin_unlock_irqrestore(&msm_chip->lock, irq_flags);
+ return 0;
+}
+
+static void msm_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ int i, j, mask;
+ unsigned val;
+
+ for (i = 0; i < ARRAY_SIZE(msm_gpio_chips); i++) {
+ struct msm_gpio_chip *msm_chip = &msm_gpio_chips[i];
+ val = readl(msm_chip->regs.int_status);
+ val &= msm_chip->int_enable[0];
+ while (val) {
+ mask = val & -val;
+ j = fls(mask) - 1;
+ /* printk("%s %08x %08x bit %d gpio %d irq %d\n",
+ __func__, v, m, j, msm_chip->chip.start + j,
+ FIRST_GPIO_IRQ + msm_chip->chip.start + j); */
+ val &= ~mask;
+ generic_handle_irq(FIRST_GPIO_IRQ +
+ msm_chip->chip.base + j);
}
}
+ desc->chip->ack(irq);
}
-EXPORT_SYMBOL(msm_gpios_disable);
-int msm_gpios_request_enable(const struct msm_gpio *table, int size)
-{
- int rc = msm_gpios_enable(table, size);
- return rc;
-}
-EXPORT_SYMBOL(msm_gpios_request_enable);
+static struct irq_chip msm_gpio_irq_chip = {
+ .name = "msmgpio",
+ .ack = msm_gpio_irq_ack,
+ .mask = msm_gpio_irq_mask,
+ .unmask = msm_gpio_irq_unmask,
+ .set_wake = msm_gpio_irq_set_wake,
+ .set_type = msm_gpio_irq_set_type,
+};
-void msm_gpios_disable_free(const struct msm_gpio *table, int size)
+static int __init msm_init_gpio(void)
{
- msm_gpios_disable(table, size);
+ int i, j = 0;
+
+ for (i = FIRST_GPIO_IRQ; i < FIRST_GPIO_IRQ + NR_GPIO_IRQS; i++) {
+ if (i - FIRST_GPIO_IRQ >=
+ msm_gpio_chips[j].chip.base +
+ msm_gpio_chips[j].chip.ngpio)
+ j++;
+ set_irq_chip_data(i, &msm_gpio_chips[j]);
+ set_irq_chip(i, &msm_gpio_irq_chip);
+ set_irq_handler(i, handle_edge_irq);
+ set_irq_flags(i, IRQF_VALID);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(msm_gpio_chips); i++) {
+ spin_lock_init(&msm_gpio_chips[i].lock);
+ writel(0, msm_gpio_chips[i].regs.int_en);
+ gpiochip_add(&msm_gpio_chips[i].chip);
+ }
+
+ set_irq_chained_handler(INT_GPIO_GROUP1, msm_gpio_irq_handler);
+ set_irq_chained_handler(INT_GPIO_GROUP2, msm_gpio_irq_handler);
+ set_irq_wake(INT_GPIO_GROUP1, 1);
+ set_irq_wake(INT_GPIO_GROUP2, 2);
+ return 0;
}
-EXPORT_SYMBOL(msm_gpios_disable_free);
+
+postcore_initcall(msm_init_gpio);
diff --git a/arch/arm/mach-msm/gpio_hw.h b/arch/arm/mach-msm/gpio_hw.h
new file mode 100644
index 0000000..6b50660
--- /dev/null
+++ b/arch/arm/mach-msm/gpio_hw.h
@@ -0,0 +1,278 @@
+/* arch/arm/mach-msm/gpio_hw.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ARCH_ARM_MACH_MSM_GPIO_HW_H
+#define __ARCH_ARM_MACH_MSM_GPIO_HW_H
+
+#include <mach/msm_iomap.h>
+
+/* see 80-VA736-2 Rev C pp 695-751
+**
+** These are actually the *shadow* gpio registers, since the
+** real ones (which allow full access) are only available to the
+** ARM9 side of the world.
+**
+** Since the _BASE need to be page-aligned when we're mapping them
+** to virtual addresses, adjust for the additional offset in these
+** macros.
+*/
+
+#if defined(CONFIG_ARCH_MSM7X30)
+#define MSM_GPIO1_REG(off) (MSM_GPIO1_BASE + (off))
+#define MSM_GPIO2_REG(off) (MSM_GPIO2_BASE + 0x400 + (off))
+#else
+#define MSM_GPIO1_REG(off) (MSM_GPIO1_BASE + 0x800 + (off))
+#define MSM_GPIO2_REG(off) (MSM_GPIO2_BASE + 0xC00 + (off))
+#endif
+
+#if defined(CONFIG_ARCH_MSM7X00A) || defined(CONFIG_ARCH_MSM7X25) ||\
+ defined(CONFIG_ARCH_MSM7X27)
+
+/* output value */
+#define MSM_GPIO_OUT_0 MSM_GPIO1_REG(0x00) /* gpio 15-0 */
+#define MSM_GPIO_OUT_1 MSM_GPIO2_REG(0x00) /* gpio 42-16 */
+#define MSM_GPIO_OUT_2 MSM_GPIO1_REG(0x04) /* gpio 67-43 */
+#define MSM_GPIO_OUT_3 MSM_GPIO1_REG(0x08) /* gpio 94-68 */
+#define MSM_GPIO_OUT_4 MSM_GPIO1_REG(0x0C) /* gpio 106-95 */
+#define MSM_GPIO_OUT_5 MSM_GPIO1_REG(0x50) /* gpio 107-121 */
+
+/* same pin map as above, output enable */
+#define MSM_GPIO_OE_0 MSM_GPIO1_REG(0x10)
+#define MSM_GPIO_OE_1 MSM_GPIO2_REG(0x08)
+#define MSM_GPIO_OE_2 MSM_GPIO1_REG(0x14)
+#define MSM_GPIO_OE_3 MSM_GPIO1_REG(0x18)
+#define MSM_GPIO_OE_4 MSM_GPIO1_REG(0x1C)
+#define MSM_GPIO_OE_5 MSM_GPIO1_REG(0x54)
+
+/* same pin map as above, input read */
+#define MSM_GPIO_IN_0 MSM_GPIO1_REG(0x34)
+#define MSM_GPIO_IN_1 MSM_GPIO2_REG(0x20)
+#define MSM_GPIO_IN_2 MSM_GPIO1_REG(0x38)
+#define MSM_GPIO_IN_3 MSM_GPIO1_REG(0x3C)
+#define MSM_GPIO_IN_4 MSM_GPIO1_REG(0x40)
+#define MSM_GPIO_IN_5 MSM_GPIO1_REG(0x44)
+
+/* same pin map as above, 1=edge 0=level interrup */
+#define MSM_GPIO_INT_EDGE_0 MSM_GPIO1_REG(0x60)
+#define MSM_GPIO_INT_EDGE_1 MSM_GPIO2_REG(0x50)
+#define MSM_GPIO_INT_EDGE_2 MSM_GPIO1_REG(0x64)
+#define MSM_GPIO_INT_EDGE_3 MSM_GPIO1_REG(0x68)
+#define MSM_GPIO_INT_EDGE_4 MSM_GPIO1_REG(0x6C)
+#define MSM_GPIO_INT_EDGE_5 MSM_GPIO1_REG(0xC0)
+
+/* same pin map as above, 1=positive 0=negative */
+#define MSM_GPIO_INT_POS_0 MSM_GPIO1_REG(0x70)
+#define MSM_GPIO_INT_POS_1 MSM_GPIO2_REG(0x58)
+#define MSM_GPIO_INT_POS_2 MSM_GPIO1_REG(0x74)
+#define MSM_GPIO_INT_POS_3 MSM_GPIO1_REG(0x78)
+#define MSM_GPIO_INT_POS_4 MSM_GPIO1_REG(0x7C)
+#define MSM_GPIO_INT_POS_5 MSM_GPIO1_REG(0xBC)
+
+/* same pin map as above, interrupt enable */
+#define MSM_GPIO_INT_EN_0 MSM_GPIO1_REG(0x80)
+#define MSM_GPIO_INT_EN_1 MSM_GPIO2_REG(0x60)
+#define MSM_GPIO_INT_EN_2 MSM_GPIO1_REG(0x84)
+#define MSM_GPIO_INT_EN_3 MSM_GPIO1_REG(0x88)
+#define MSM_GPIO_INT_EN_4 MSM_GPIO1_REG(0x8C)
+#define MSM_GPIO_INT_EN_5 MSM_GPIO1_REG(0xB8)
+
+/* same pin map as above, write 1 to clear interrupt */
+#define MSM_GPIO_INT_CLEAR_0 MSM_GPIO1_REG(0x90)
+#define MSM_GPIO_INT_CLEAR_1 MSM_GPIO2_REG(0x68)
+#define MSM_GPIO_INT_CLEAR_2 MSM_GPIO1_REG(0x94)
+#define MSM_GPIO_INT_CLEAR_3 MSM_GPIO1_REG(0x98)
+#define MSM_GPIO_INT_CLEAR_4 MSM_GPIO1_REG(0x9C)
+#define MSM_GPIO_INT_CLEAR_5 MSM_GPIO1_REG(0xB4)
+
+/* same pin map as above, 1=interrupt pending */
+#define MSM_GPIO_INT_STATUS_0 MSM_GPIO1_REG(0xA0)
+#define MSM_GPIO_INT_STATUS_1 MSM_GPIO2_REG(0x70)
+#define MSM_GPIO_INT_STATUS_2 MSM_GPIO1_REG(0xA4)
+#define MSM_GPIO_INT_STATUS_3 MSM_GPIO1_REG(0xA8)
+#define MSM_GPIO_INT_STATUS_4 MSM_GPIO1_REG(0xAC)
+#define MSM_GPIO_INT_STATUS_5 MSM_GPIO1_REG(0xB0)
+
+#endif
+
+#if defined(CONFIG_ARCH_QSD8X50)
+/* output value */
+#define MSM_GPIO_OUT_0 MSM_GPIO1_REG(0x00) /* gpio 15-0 */
+#define MSM_GPIO_OUT_1 MSM_GPIO2_REG(0x00) /* gpio 42-16 */
+#define MSM_GPIO_OUT_2 MSM_GPIO1_REG(0x04) /* gpio 67-43 */
+#define MSM_GPIO_OUT_3 MSM_GPIO1_REG(0x08) /* gpio 94-68 */
+#define MSM_GPIO_OUT_4 MSM_GPIO1_REG(0x0C) /* gpio 103-95 */
+#define MSM_GPIO_OUT_5 MSM_GPIO1_REG(0x10) /* gpio 121-104 */
+#define MSM_GPIO_OUT_6 MSM_GPIO1_REG(0x14) /* gpio 152-122 */
+#define MSM_GPIO_OUT_7 MSM_GPIO1_REG(0x18) /* gpio 164-153 */
+
+/* same pin map as above, output enable */
+#define MSM_GPIO_OE_0 MSM_GPIO1_REG(0x20)
+#define MSM_GPIO_OE_1 MSM_GPIO2_REG(0x08)
+#define MSM_GPIO_OE_2 MSM_GPIO1_REG(0x24)
+#define MSM_GPIO_OE_3 MSM_GPIO1_REG(0x28)
+#define MSM_GPIO_OE_4 MSM_GPIO1_REG(0x2C)
+#define MSM_GPIO_OE_5 MSM_GPIO1_REG(0x30)
+#define MSM_GPIO_OE_6 MSM_GPIO1_REG(0x34)
+#define MSM_GPIO_OE_7 MSM_GPIO1_REG(0x38)
+
+/* same pin map as above, input read */
+#define MSM_GPIO_IN_0 MSM_GPIO1_REG(0x50)
+#define MSM_GPIO_IN_1 MSM_GPIO2_REG(0x20)
+#define MSM_GPIO_IN_2 MSM_GPIO1_REG(0x54)
+#define MSM_GPIO_IN_3 MSM_GPIO1_REG(0x58)
+#define MSM_GPIO_IN_4 MSM_GPIO1_REG(0x5C)
+#define MSM_GPIO_IN_5 MSM_GPIO1_REG(0x60)
+#define MSM_GPIO_IN_6 MSM_GPIO1_REG(0x64)
+#define MSM_GPIO_IN_7 MSM_GPIO1_REG(0x68)
+
+/* same pin map as above, 1=edge 0=level interrup */
+#define MSM_GPIO_INT_EDGE_0 MSM_GPIO1_REG(0x70)
+#define MSM_GPIO_INT_EDGE_1 MSM_GPIO2_REG(0x50)
+#define MSM_GPIO_INT_EDGE_2 MSM_GPIO1_REG(0x74)
+#define MSM_GPIO_INT_EDGE_3 MSM_GPIO1_REG(0x78)
+#define MSM_GPIO_INT_EDGE_4 MSM_GPIO1_REG(0x7C)
+#define MSM_GPIO_INT_EDGE_5 MSM_GPIO1_REG(0x80)
+#define MSM_GPIO_INT_EDGE_6 MSM_GPIO1_REG(0x84)
+#define MSM_GPIO_INT_EDGE_7 MSM_GPIO1_REG(0x88)
+
+/* same pin map as above, 1=positive 0=negative */
+#define MSM_GPIO_INT_POS_0 MSM_GPIO1_REG(0x90)
+#define MSM_GPIO_INT_POS_1 MSM_GPIO2_REG(0x58)
+#define MSM_GPIO_INT_POS_2 MSM_GPIO1_REG(0x94)
+#define MSM_GPIO_INT_POS_3 MSM_GPIO1_REG(0x98)
+#define MSM_GPIO_INT_POS_4 MSM_GPIO1_REG(0x9C)
+#define MSM_GPIO_INT_POS_5 MSM_GPIO1_REG(0xA0)
+#define MSM_GPIO_INT_POS_6 MSM_GPIO1_REG(0xA4)
+#define MSM_GPIO_INT_POS_7 MSM_GPIO1_REG(0xA8)
+
+/* same pin map as above, interrupt enable */
+#define MSM_GPIO_INT_EN_0 MSM_GPIO1_REG(0xB0)
+#define MSM_GPIO_INT_EN_1 MSM_GPIO2_REG(0x60)
+#define MSM_GPIO_INT_EN_2 MSM_GPIO1_REG(0xB4)
+#define MSM_GPIO_INT_EN_3 MSM_GPIO1_REG(0xB8)
+#define MSM_GPIO_INT_EN_4 MSM_GPIO1_REG(0xBC)
+#define MSM_GPIO_INT_EN_5 MSM_GPIO1_REG(0xC0)
+#define MSM_GPIO_INT_EN_6 MSM_GPIO1_REG(0xC4)
+#define MSM_GPIO_INT_EN_7 MSM_GPIO1_REG(0xC8)
+
+/* same pin map as above, write 1 to clear interrupt */
+#define MSM_GPIO_INT_CLEAR_0 MSM_GPIO1_REG(0xD0)
+#define MSM_GPIO_INT_CLEAR_1 MSM_GPIO2_REG(0x68)
+#define MSM_GPIO_INT_CLEAR_2 MSM_GPIO1_REG(0xD4)
+#define MSM_GPIO_INT_CLEAR_3 MSM_GPIO1_REG(0xD8)
+#define MSM_GPIO_INT_CLEAR_4 MSM_GPIO1_REG(0xDC)
+#define MSM_GPIO_INT_CLEAR_5 MSM_GPIO1_REG(0xE0)
+#define MSM_GPIO_INT_CLEAR_6 MSM_GPIO1_REG(0xE4)
+#define MSM_GPIO_INT_CLEAR_7 MSM_GPIO1_REG(0xE8)
+
+/* same pin map as above, 1=interrupt pending */
+#define MSM_GPIO_INT_STATUS_0 MSM_GPIO1_REG(0xF0)
+#define MSM_GPIO_INT_STATUS_1 MSM_GPIO2_REG(0x70)
+#define MSM_GPIO_INT_STATUS_2 MSM_GPIO1_REG(0xF4)
+#define MSM_GPIO_INT_STATUS_3 MSM_GPIO1_REG(0xF8)
+#define MSM_GPIO_INT_STATUS_4 MSM_GPIO1_REG(0xFC)
+#define MSM_GPIO_INT_STATUS_5 MSM_GPIO1_REG(0x100)
+#define MSM_GPIO_INT_STATUS_6 MSM_GPIO1_REG(0x104)
+#define MSM_GPIO_INT_STATUS_7 MSM_GPIO1_REG(0x108)
+
+#endif
+
+#if defined(CONFIG_ARCH_MSM7X30)
+
+/* output value */
+#define MSM_GPIO_OUT_0 MSM_GPIO1_REG(0x00) /* gpio 15-0 */
+#define MSM_GPIO_OUT_1 MSM_GPIO2_REG(0x00) /* gpio 43-16 */
+#define MSM_GPIO_OUT_2 MSM_GPIO1_REG(0x04) /* gpio 67-44 */
+#define MSM_GPIO_OUT_3 MSM_GPIO1_REG(0x08) /* gpio 94-68 */
+#define MSM_GPIO_OUT_4 MSM_GPIO1_REG(0x0C) /* gpio 106-95 */
+#define MSM_GPIO_OUT_5 MSM_GPIO1_REG(0x50) /* gpio 133-107 */
+#define MSM_GPIO_OUT_6 MSM_GPIO1_REG(0xC4) /* gpio 150-134 */
+#define MSM_GPIO_OUT_7 MSM_GPIO1_REG(0x214) /* gpio 181-151 */
+
+/* same pin map as above, output enable */
+#define MSM_GPIO_OE_0 MSM_GPIO1_REG(0x10)
+#define MSM_GPIO_OE_1 MSM_GPIO2_REG(0x08)
+#define MSM_GPIO_OE_2 MSM_GPIO1_REG(0x14)
+#define MSM_GPIO_OE_3 MSM_GPIO1_REG(0x18)
+#define MSM_GPIO_OE_4 MSM_GPIO1_REG(0x1C)
+#define MSM_GPIO_OE_5 MSM_GPIO1_REG(0x54)
+#define MSM_GPIO_OE_6 MSM_GPIO1_REG(0xC8)
+#define MSM_GPIO_OE_7 MSM_GPIO1_REG(0x218)
+
+/* same pin map as above, input read */
+#define MSM_GPIO_IN_0 MSM_GPIO1_REG(0x34)
+#define MSM_GPIO_IN_1 MSM_GPIO2_REG(0x20)
+#define MSM_GPIO_IN_2 MSM_GPIO1_REG(0x38)
+#define MSM_GPIO_IN_3 MSM_GPIO1_REG(0x3C)
+#define MSM_GPIO_IN_4 MSM_GPIO1_REG(0x40)
+#define MSM_GPIO_IN_5 MSM_GPIO1_REG(0x44)
+#define MSM_GPIO_IN_6 MSM_GPIO1_REG(0xCC)
+#define MSM_GPIO_IN_7 MSM_GPIO1_REG(0x21C)
+
+/* same pin map as above, 1=edge 0=level interrup */
+#define MSM_GPIO_INT_EDGE_0 MSM_GPIO1_REG(0x60)
+#define MSM_GPIO_INT_EDGE_1 MSM_GPIO2_REG(0x50)
+#define MSM_GPIO_INT_EDGE_2 MSM_GPIO1_REG(0x64)
+#define MSM_GPIO_INT_EDGE_3 MSM_GPIO1_REG(0x68)
+#define MSM_GPIO_INT_EDGE_4 MSM_GPIO1_REG(0x6C)
+#define MSM_GPIO_INT_EDGE_5 MSM_GPIO1_REG(0xC0)
+#define MSM_GPIO_INT_EDGE_6 MSM_GPIO1_REG(0xD0)
+#define MSM_GPIO_INT_EDGE_7 MSM_GPIO1_REG(0x240)
+
+/* same pin map as above, 1=positive 0=negative */
+#define MSM_GPIO_INT_POS_0 MSM_GPIO1_REG(0x70)
+#define MSM_GPIO_INT_POS_1 MSM_GPIO2_REG(0x58)
+#define MSM_GPIO_INT_POS_2 MSM_GPIO1_REG(0x74)
+#define MSM_GPIO_INT_POS_3 MSM_GPIO1_REG(0x78)
+#define MSM_GPIO_INT_POS_4 MSM_GPIO1_REG(0x7C)
+#define MSM_GPIO_INT_POS_5 MSM_GPIO1_REG(0xBC)
+#define MSM_GPIO_INT_POS_6 MSM_GPIO1_REG(0xD4)
+#define MSM_GPIO_INT_POS_7 MSM_GPIO1_REG(0x228)
+
+/* same pin map as above, interrupt enable */
+#define MSM_GPIO_INT_EN_0 MSM_GPIO1_REG(0x80)
+#define MSM_GPIO_INT_EN_1 MSM_GPIO2_REG(0x60)
+#define MSM_GPIO_INT_EN_2 MSM_GPIO1_REG(0x84)
+#define MSM_GPIO_INT_EN_3 MSM_GPIO1_REG(0x88)
+#define MSM_GPIO_INT_EN_4 MSM_GPIO1_REG(0x8C)
+#define MSM_GPIO_INT_EN_5 MSM_GPIO1_REG(0xB8)
+#define MSM_GPIO_INT_EN_6 MSM_GPIO1_REG(0xD8)
+#define MSM_GPIO_INT_EN_7 MSM_GPIO1_REG(0x22C)
+
+/* same pin map as above, write 1 to clear interrupt */
+#define MSM_GPIO_INT_CLEAR_0 MSM_GPIO1_REG(0x90)
+#define MSM_GPIO_INT_CLEAR_1 MSM_GPIO2_REG(0x68)
+#define MSM_GPIO_INT_CLEAR_2 MSM_GPIO1_REG(0x94)
+#define MSM_GPIO_INT_CLEAR_3 MSM_GPIO1_REG(0x98)
+#define MSM_GPIO_INT_CLEAR_4 MSM_GPIO1_REG(0x9C)
+#define MSM_GPIO_INT_CLEAR_5 MSM_GPIO1_REG(0xB4)
+#define MSM_GPIO_INT_CLEAR_6 MSM_GPIO1_REG(0xDC)
+#define MSM_GPIO_INT_CLEAR_7 MSM_GPIO1_REG(0x230)
+
+/* same pin map as above, 1=interrupt pending */
+#define MSM_GPIO_INT_STATUS_0 MSM_GPIO1_REG(0xA0)
+#define MSM_GPIO_INT_STATUS_1 MSM_GPIO2_REG(0x70)
+#define MSM_GPIO_INT_STATUS_2 MSM_GPIO1_REG(0xA4)
+#define MSM_GPIO_INT_STATUS_3 MSM_GPIO1_REG(0xA8)
+#define MSM_GPIO_INT_STATUS_4 MSM_GPIO1_REG(0xAC)
+#define MSM_GPIO_INT_STATUS_5 MSM_GPIO1_REG(0xB0)
+#define MSM_GPIO_INT_STATUS_6 MSM_GPIO1_REG(0xE0)
+#define MSM_GPIO_INT_STATUS_7 MSM_GPIO1_REG(0x234)
+
+#endif
+
+#endif
diff --git a/arch/arm/mach-msm/gpiomux-7x30.c b/arch/arm/mach-msm/gpiomux-7x30.c
new file mode 100644
index 0000000..6ce41c5
--- /dev/null
+++ b/arch/arm/mach-msm/gpiomux-7x30.c
@@ -0,0 +1,38 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#include "gpiomux.h"
+
+struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
+#ifdef CONFIG_SERIAL_MSM_CONSOLE
+ [49] = { /* UART2 RFR */
+ .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
+ GPIOMUX_FUNC_2 | GPIOMUX_VALID,
+ },
+ [50] = { /* UART2 CTS */
+ .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
+ GPIOMUX_FUNC_2 | GPIOMUX_VALID,
+ },
+ [51] = { /* UART2 RX */
+ .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
+ GPIOMUX_FUNC_2 | GPIOMUX_VALID,
+ },
+ [52] = { /* UART2 TX */
+ .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
+ GPIOMUX_FUNC_2 | GPIOMUX_VALID,
+ },
+#endif
+};
diff --git a/arch/arm/mach-msm/gpiomux-8x50.c b/arch/arm/mach-msm/gpiomux-8x50.c
new file mode 100644
index 0000000..4406e0f
--- /dev/null
+++ b/arch/arm/mach-msm/gpiomux-8x50.c
@@ -0,0 +1,28 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#include "gpiomux.h"
+
+struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
+ [86] = { /* UART3 RX */
+ .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
+ GPIOMUX_FUNC_1 | GPIOMUX_VALID,
+ },
+ [87] = { /* UART3 TX */
+ .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
+ GPIOMUX_FUNC_1 | GPIOMUX_VALID,
+ },
+};
diff --git a/arch/arm/mach-msm/gpiomux-8x60.c b/arch/arm/mach-msm/gpiomux-8x60.c
new file mode 100644
index 0000000..7b380b3
--- /dev/null
+++ b/arch/arm/mach-msm/gpiomux-8x60.c
@@ -0,0 +1,19 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#include "gpiomux.h"
+
+struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {};
diff --git a/arch/arm/mach-msm/gpiomux-v1.c b/arch/arm/mach-msm/gpiomux-v1.c
new file mode 100644
index 0000000..27de2ab
--- /dev/null
+++ b/arch/arm/mach-msm/gpiomux-v1.c
@@ -0,0 +1,33 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#include <linux/kernel.h>
+#include "gpiomux.h"
+#include "proc_comm.h"
+
+void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val)
+{
+ unsigned tlmm_config = (val & ~GPIOMUX_CTL_MASK) |
+ ((gpio & 0x3ff) << 4);
+ unsigned tlmm_disable = 0;
+ int rc;
+
+ rc = msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX,
+ &tlmm_config, &tlmm_disable);
+ if (rc)
+ pr_err("%s: unexpected proc_comm failure %d: %08x %08x\n",
+ __func__, rc, tlmm_config, tlmm_disable);
+}
diff --git a/arch/arm/mach-msm/gpiomux-v1.h b/arch/arm/mach-msm/gpiomux-v1.h
new file mode 100644
index 0000000..71d86fe
--- /dev/null
+++ b/arch/arm/mach-msm/gpiomux-v1.h
@@ -0,0 +1,67 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#ifndef __ARCH_ARM_MACH_MSM_GPIOMUX_V1_H
+#define __ARCH_ARM_MACH_MSM_GPIOMUX_V1_H
+
+#if defined(CONFIG_ARCH_MSM7X30)
+#define GPIOMUX_NGPIOS 182
+#elif defined(CONFIG_ARCH_QSD8X50)
+#define GPIOMUX_NGPIOS 165
+#else
+#define GPIOMUX_NGPIOS 133
+#endif
+
+typedef u32 gpiomux_config_t;
+
+enum {
+ GPIOMUX_DRV_2MA = 0UL << 17,
+ GPIOMUX_DRV_4MA = 1UL << 17,
+ GPIOMUX_DRV_6MA = 2UL << 17,
+ GPIOMUX_DRV_8MA = 3UL << 17,
+ GPIOMUX_DRV_10MA = 4UL << 17,
+ GPIOMUX_DRV_12MA = 5UL << 17,
+ GPIOMUX_DRV_14MA = 6UL << 17,
+ GPIOMUX_DRV_16MA = 7UL << 17,
+};
+
+enum {
+ GPIOMUX_FUNC_GPIO = 0UL,
+ GPIOMUX_FUNC_1 = 1UL,
+ GPIOMUX_FUNC_2 = 2UL,
+ GPIOMUX_FUNC_3 = 3UL,
+ GPIOMUX_FUNC_4 = 4UL,
+ GPIOMUX_FUNC_5 = 5UL,
+ GPIOMUX_FUNC_6 = 6UL,
+ GPIOMUX_FUNC_7 = 7UL,
+ GPIOMUX_FUNC_8 = 8UL,
+ GPIOMUX_FUNC_9 = 9UL,
+ GPIOMUX_FUNC_A = 10UL,
+ GPIOMUX_FUNC_B = 11UL,
+ GPIOMUX_FUNC_C = 12UL,
+ GPIOMUX_FUNC_D = 13UL,
+ GPIOMUX_FUNC_E = 14UL,
+ GPIOMUX_FUNC_F = 15UL,
+};
+
+enum {
+ GPIOMUX_PULL_NONE = 0UL << 15,
+ GPIOMUX_PULL_DOWN = 1UL << 15,
+ GPIOMUX_PULL_KEEPER = 2UL << 15,
+ GPIOMUX_PULL_UP = 3UL << 15,
+};
+
+#endif
diff --git a/arch/arm/mach-msm/gpiomux-v2.c b/arch/arm/mach-msm/gpiomux-v2.c
new file mode 100644
index 0000000..273396d
--- /dev/null
+++ b/arch/arm/mach-msm/gpiomux-v2.c
@@ -0,0 +1,25 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#include <linux/io.h>
+#include <mach/msm_iomap.h>
+#include "gpiomux.h"
+
+void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val)
+{
+ writel(val & ~GPIOMUX_CTL_MASK,
+ MSM_TLMM_BASE + 0x1000 + (0x10 * gpio));
+}
diff --git a/arch/arm/mach-msm/gpiomux-v2.h b/arch/arm/mach-msm/gpiomux-v2.h
new file mode 100644
index 0000000..3bf10e7
--- /dev/null
+++ b/arch/arm/mach-msm/gpiomux-v2.h
@@ -0,0 +1,61 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#ifndef __ARCH_ARM_MACH_MSM_GPIOMUX_V2_H
+#define __ARCH_ARM_MACH_MSM_GPIOMUX_V2_H
+
+#define GPIOMUX_NGPIOS 173
+
+typedef u16 gpiomux_config_t;
+
+enum {
+ GPIOMUX_DRV_2MA = 0UL << 6,
+ GPIOMUX_DRV_4MA = 1UL << 6,
+ GPIOMUX_DRV_6MA = 2UL << 6,
+ GPIOMUX_DRV_8MA = 3UL << 6,
+ GPIOMUX_DRV_10MA = 4UL << 6,
+ GPIOMUX_DRV_12MA = 5UL << 6,
+ GPIOMUX_DRV_14MA = 6UL << 6,
+ GPIOMUX_DRV_16MA = 7UL << 6,
+};
+
+enum {
+ GPIOMUX_FUNC_GPIO = 0UL << 2,
+ GPIOMUX_FUNC_1 = 1UL << 2,
+ GPIOMUX_FUNC_2 = 2UL << 2,
+ GPIOMUX_FUNC_3 = 3UL << 2,
+ GPIOMUX_FUNC_4 = 4UL << 2,
+ GPIOMUX_FUNC_5 = 5UL << 2,
+ GPIOMUX_FUNC_6 = 6UL << 2,
+ GPIOMUX_FUNC_7 = 7UL << 2,
+ GPIOMUX_FUNC_8 = 8UL << 2,
+ GPIOMUX_FUNC_9 = 9UL << 2,
+ GPIOMUX_FUNC_A = 10UL << 2,
+ GPIOMUX_FUNC_B = 11UL << 2,
+ GPIOMUX_FUNC_C = 12UL << 2,
+ GPIOMUX_FUNC_D = 13UL << 2,
+ GPIOMUX_FUNC_E = 14UL << 2,
+ GPIOMUX_FUNC_F = 15UL << 2,
+};
+
+enum {
+ GPIOMUX_PULL_NONE = 0UL,
+ GPIOMUX_PULL_DOWN = 1UL,
+ GPIOMUX_PULL_KEEPER = 2UL,
+ GPIOMUX_PULL_UP = 3UL,
+};
+
+#endif
diff --git a/arch/arm/mach-msm/gpiomux.c b/arch/arm/mach-msm/gpiomux.c
new file mode 100644
index 0000000..53af21a
--- /dev/null
+++ b/arch/arm/mach-msm/gpiomux.c
@@ -0,0 +1,96 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include "gpiomux.h"
+
+static DEFINE_SPINLOCK(gpiomux_lock);
+
+int msm_gpiomux_write(unsigned gpio,
+ gpiomux_config_t active,
+ gpiomux_config_t suspended)
+{
+ struct msm_gpiomux_config *cfg = msm_gpiomux_configs + gpio;
+ unsigned long irq_flags;
+ gpiomux_config_t setting;
+
+ if (gpio >= GPIOMUX_NGPIOS)
+ return -EINVAL;
+
+ spin_lock_irqsave(&gpiomux_lock, irq_flags);
+
+ if (active & GPIOMUX_VALID)
+ cfg->active = active;
+
+ if (suspended & GPIOMUX_VALID)
+ cfg->suspended = suspended;
+
+ setting = cfg->ref ? active : suspended;
+ if (setting & GPIOMUX_VALID)
+ __msm_gpiomux_write(gpio, setting);
+
+ spin_unlock_irqrestore(&gpiomux_lock, irq_flags);
+ return 0;
+}
+EXPORT_SYMBOL(msm_gpiomux_write);
+
+int msm_gpiomux_get(unsigned gpio)
+{
+ struct msm_gpiomux_config *cfg = msm_gpiomux_configs + gpio;
+ unsigned long irq_flags;
+
+ if (gpio >= GPIOMUX_NGPIOS)
+ return -EINVAL;
+
+ spin_lock_irqsave(&gpiomux_lock, irq_flags);
+ if (cfg->ref++ == 0 && cfg->active & GPIOMUX_VALID)
+ __msm_gpiomux_write(gpio, cfg->active);
+ spin_unlock_irqrestore(&gpiomux_lock, irq_flags);
+ return 0;
+}
+EXPORT_SYMBOL(msm_gpiomux_get);
+
+int msm_gpiomux_put(unsigned gpio)
+{
+ struct msm_gpiomux_config *cfg = msm_gpiomux_configs + gpio;
+ unsigned long irq_flags;
+
+ if (gpio >= GPIOMUX_NGPIOS)
+ return -EINVAL;
+
+ spin_lock_irqsave(&gpiomux_lock, irq_flags);
+ BUG_ON(cfg->ref == 0);
+ if (--cfg->ref == 0 && cfg->suspended & GPIOMUX_VALID)
+ __msm_gpiomux_write(gpio, cfg->suspended);
+ spin_unlock_irqrestore(&gpiomux_lock, irq_flags);
+ return 0;
+}
+EXPORT_SYMBOL(msm_gpiomux_put);
+
+static int __init gpiomux_init(void)
+{
+ unsigned n;
+
+ for (n = 0; n < GPIOMUX_NGPIOS; ++n) {
+ msm_gpiomux_configs[n].ref = 0;
+ if (!(msm_gpiomux_configs[n].suspended & GPIOMUX_VALID))
+ continue;
+ __msm_gpiomux_write(n, msm_gpiomux_configs[n].suspended);
+ }
+ return 0;
+}
+postcore_initcall(gpiomux_init);
diff --git a/arch/arm/mach-msm/gpiomux.h b/arch/arm/mach-msm/gpiomux.h
new file mode 100644
index 0000000..b178d9c
--- /dev/null
+++ b/arch/arm/mach-msm/gpiomux.h
@@ -0,0 +1,114 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#ifndef __ARCH_ARM_MACH_MSM_GPIOMUX_H
+#define __ARCH_ARM_MACH_MSM_GPIOMUX_H
+
+#include <linux/bitops.h>
+#include <linux/errno.h>
+
+#if defined(CONFIG_MSM_V2_TLMM)
+#include "gpiomux-v2.h"
+#else
+#include "gpiomux-v1.h"
+#endif
+
+/**
+ * struct msm_gpiomux_config: gpiomux settings for one gpio line.
+ *
+ * A complete gpiomux config is the bitwise-or of a drive-strength,
+ * function, and pull. For functions other than GPIO, the OE
+ * is hard-wired according to the function. For GPIO mode,
+ * OE is controlled by gpiolib.
+ *
+ * Available settings differ by target; see the gpiomux header
+ * specific to your target arch for available configurations.
+ *
+ * @active: The configuration to be installed when the line is
+ * active, or its reference count is > 0.
+ * @suspended: The configuration to be installed when the line
+ * is suspended, or its reference count is 0.
+ * @ref: The reference count of the line. For internal use of
+ * the gpiomux framework only.
+ */
+struct msm_gpiomux_config {
+ gpiomux_config_t active;
+ gpiomux_config_t suspended;
+ unsigned ref;
+};
+
+/**
+ * @GPIOMUX_VALID: If set, the config field contains 'good data'.
+ * The absence of this bit will prevent the gpiomux
+ * system from applying the configuration under all
+ * circumstances.
+ */
+enum {
+ GPIOMUX_VALID = BIT(sizeof(gpiomux_config_t) * BITS_PER_BYTE - 1),
+ GPIOMUX_CTL_MASK = GPIOMUX_VALID,
+};
+
+#ifdef CONFIG_MSM_GPIOMUX
+
+/* Each architecture must provide its own instance of this table.
+ * To avoid having gpiomux manage any given gpio, one or both of
+ * the entries can avoid setting GPIOMUX_VALID - the absence
+ * of that flag will prevent the configuration from being applied
+ * during state transitions.
+ */
+extern struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS];
+
+/* Increment a gpio's reference count, possibly activating the line. */
+int __must_check msm_gpiomux_get(unsigned gpio);
+
+/* Decrement a gpio's reference count, possibly suspending the line. */
+int msm_gpiomux_put(unsigned gpio);
+
+/* Install a new configuration to the gpio line. To avoid overwriting
+ * a configuration, leave the VALID bit out.
+ */
+int msm_gpiomux_write(unsigned gpio,
+ gpiomux_config_t active,
+ gpiomux_config_t suspended);
+
+/* Architecture-internal function for use by the framework only.
+ * This function can assume the following:
+ * - the gpio value has passed a bounds-check
+ * - the gpiomux spinlock has been obtained
+ *
+ * This function is not for public consumption. External users
+ * should use msm_gpiomux_write.
+ */
+void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val);
+#else
+static inline int __must_check msm_gpiomux_get(unsigned gpio)
+{
+ return -ENOSYS;
+}
+
+static inline int msm_gpiomux_put(unsigned gpio)
+{
+ return -ENOSYS;
+}
+
+static inline int msm_gpiomux_write(unsigned gpio,
+ gpiomux_config_t active,
+ gpiomux_config_t suspended)
+{
+ return -ENOSYS;
+}
+#endif
+#endif
diff --git a/arch/arm/mach-msm/include/mach/board.h b/arch/arm/mach-msm/include/mach/board.h
index 5a79bcf..6abf4a6 100644
--- a/arch/arm/mach-msm/include/mach/board.h
+++ b/arch/arm/mach-msm/include/mach/board.h
@@ -33,6 +33,8 @@
struct clk;
+extern struct sys_timer msm_timer;
+
/* common init routines for use by arch/arm/mach-msm/board-*.c */
void __init msm_add_devices(void);
diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/mach-msm/include/mach/debug-macro.S
index 528750f..238c4f1 100644
--- a/arch/arm/mach-msm/include/mach/debug-macro.S
+++ b/arch/arm/mach-msm/include/mach/debug-macro.S
@@ -19,7 +19,7 @@
#include <mach/hardware.h>
#include <mach/msm_iomap.h>
-#ifdef CONFIG_MSM_DEBUG_UART
+#ifdef CONFIG_HAS_MSM_DEBUG_UART_PHYS
.macro addruart, rx, tmp
@ see if the MMU is enabled and select appropriate base address
mrc p15, 0, \rx, c1, c0
diff --git a/arch/arm/mach-msm/include/mach/dma.h b/arch/arm/mach-msm/include/mach/dma.h
index 00f9bbf..05583f5 100644
--- a/arch/arm/mach-msm/include/mach/dma.h
+++ b/arch/arm/mach-msm/include/mach/dma.h
@@ -32,10 +32,18 @@
void *data;
};
+#ifndef CONFIG_ARCH_MSM8X60
void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd);
void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd, int graceful);
int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr);
-
+#else
+static inline
+void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd) { }
+static inline
+void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd, int graceful) { }
+static inline
+int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr) { return -EIO; }
+#endif
#define DMOV_SD0(off, ch) (MSM_DMOV_BASE + 0x0000 + (off) + ((ch) << 2))
diff --git a/arch/arm/mach-msm/include/mach/entry-macro-qgic.S b/arch/arm/mach-msm/include/mach/entry-macro-qgic.S
new file mode 100644
index 0000000..4dc99aa
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/entry-macro-qgic.S
@@ -0,0 +1,88 @@
+/*
+ * Low-level IRQ helper macros
+ *
+ * Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/hardware.h>
+#include <asm/hardware/gic.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =gic_cpu_base_addr
+ ldr \base, [\base]
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ /*
+ * The interrupt numbering scheme is defined in the
+ * interrupt controller spec. To wit:
+ *
+ * Migrated the code from ARM MP port to be more consistant
+ * with interrupt processing , the following still holds true
+ * however, all interrupts are treated the same regardless of
+ * if they are local IPI or PPI
+ *
+ * Interrupts 0-15 are IPI
+ * 16-31 are PPI
+ * (16-18 are the timers)
+ * 32-1020 are global
+ * 1021-1022 are reserved
+ * 1023 is "spurious" (no interrupt)
+ *
+ * A simple read from the controller will tell us the number of the
+ * highest priority enabled interrupt. We then just need to check
+ * whether it is in the valid range for an IRQ (0-1020 inclusive).
+ *
+ * Base ARM code assumes that the local (private) peripheral interrupts
+ * are not valid, we treat them differently, in that the privates are
+ * handled like normal shared interrupts with the exception that only
+ * one processor can register the interrupt and the handler must be
+ * the same for all processors.
+ */
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+ ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 =srcCPU,
+ 9-0 =int # */
+
+ bic \irqnr, \irqstat, #0x1c00 @mask src
+ cmp \irqnr, #15
+ ldr \tmp, =1021
+ cmpcc \irqnr, \irqnr
+ cmpne \irqnr, \tmp
+ cmpcs \irqnr, \irqnr
+
+ .endm
+
+ /* We assume that irqstat (the raw value of the IRQ acknowledge
+ * register) is preserved from the macro above.
+ * If there is an IPI, we immediately signal end of interrupt on the
+ * controller, since this requires the original irqstat value which
+ * we won't easily be able to recreate later.
+ */
+ .macro test_for_ipi, irqnr, irqstat, base, tmp
+ bic \irqnr, \irqstat, #0x1c00
+ cmp \irqnr, #16
+ strcc \irqstat, [\base, #GIC_CPU_EOI]
+ cmpcs \irqnr, \irqnr
+ .endm
+
+ /* As above, this assumes that irqstat and base are preserved.. */
+
+ .macro test_for_ltirq, irqnr, irqstat, base, tmp
+ bic \irqnr, \irqstat, #0x1c00
+ mov \tmp, #0
+ cmp \irqnr, #16
+ moveq \tmp, #1
+ streq \irqstat, [\base, #GIC_CPU_EOI]
+ cmp \tmp, #0
+ .endm
diff --git a/arch/arm/mach-msm/include/mach/entry-macro-vic.S b/arch/arm/mach-msm/include/mach/entry-macro-vic.S
new file mode 100644
index 0000000..70563ed
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/entry-macro-vic.S
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <mach/msm_iomap.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ @ enable imprecise aborts
+ cpsie a
+ mov \base, #MSM_VIC_BASE
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ @ 0xD0 has irq# or old irq# if the irq has been handled
+ @ 0xD4 has irq# or -1 if none pending *but* if you just
+ @ read 0xD4 you never get the first irq for some reason
+ ldr \irqnr, [\base, #0xD0]
+ ldr \irqnr, [\base, #0xD4]
+ cmp \irqnr, #0xffffffff
+ .endm
diff --git a/arch/arm/mach-msm/include/mach/entry-macro.S b/arch/arm/mach-msm/include/mach/entry-macro.S
index d225948..b16f082 100644
--- a/arch/arm/mach-msm/include/mach/entry-macro.S
+++ b/arch/arm/mach-msm/include/mach/entry-macro.S
@@ -1,38 +1,23 @@
-/* arch/arm/mach-msm7200/include/mach/entry-macro.S
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
*
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
*/
-#include <mach/msm_iomap.h>
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- @ enable imprecise aborts
- cpsie a
- mov \base, #MSM_VIC_BASE
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- @ 0xD0 has irq# or old irq# if the irq has been handled
- @ 0xD4 has irq# or -1 if none pending *but* if you just
- @ read 0xD4 you never get the first irq for some reason
- ldr \irqnr, [\base, #0xD0]
- ldr \irqnr, [\base, #0xD4]
- cmp \irqnr, #0xffffffff
- .endm
+#if defined(CONFIG_ARM_GIC)
+#include <mach/entry-macro-qgic.S>
+#else
+#include <mach/entry-macro-vic.S>
+#endif
diff --git a/arch/arm/mach-msm/include/mach/gpio.h b/arch/arm/mach-msm/include/mach/gpio.h
index 83e47c0..36ad50d 100644
--- a/arch/arm/mach-msm/include/mach/gpio.h
+++ b/arch/arm/mach-msm/include/mach/gpio.h
@@ -23,127 +23,4 @@
#define gpio_cansleep __gpio_cansleep
#define gpio_to_irq __gpio_to_irq
-/**
- * struct msm_gpio - GPIO pin description
- * @gpio_cfg - configuration bitmap, as per gpio_tlmm_config()
- * @label - textual label
- *
- * Usually, GPIO's are operated by sets.
- * This struct accumulate all GPIO information in single source
- * and facilitete group operations provided by msm_gpios_xxx()
- */
-struct msm_gpio {
- u32 gpio_cfg;
- const char *label;
-};
-
-/**
- * msm_gpios_request_enable() - request and enable set of GPIOs
- *
- * Request and configure set of GPIO's
- * In case of error, all operations rolled back.
- * Return error code.
- *
- * @table: GPIO table
- * @size: number of entries in @table
- */
-int msm_gpios_request_enable(const struct msm_gpio *table, int size);
-
-/**
- * msm_gpios_disable_free() - disable and free set of GPIOs
- *
- * @table: GPIO table
- * @size: number of entries in @table
- */
-void msm_gpios_disable_free(const struct msm_gpio *table, int size);
-
-/**
- * msm_gpios_request() - request set of GPIOs
- * In case of error, all operations rolled back.
- * Return error code.
- *
- * @table: GPIO table
- * @size: number of entries in @table
- */
-int msm_gpios_request(const struct msm_gpio *table, int size);
-
-/**
- * msm_gpios_free() - free set of GPIOs
- *
- * @table: GPIO table
- * @size: number of entries in @table
- */
-void msm_gpios_free(const struct msm_gpio *table, int size);
-
-/**
- * msm_gpios_enable() - enable set of GPIOs
- * In case of error, all operations rolled back.
- * Return error code.
- *
- * @table: GPIO table
- * @size: number of entries in @table
- */
-int msm_gpios_enable(const struct msm_gpio *table, int size);
-
-/**
- * msm_gpios_disable() - disable set of GPIOs
- *
- * @table: GPIO table
- * @size: number of entries in @table
- */
-void msm_gpios_disable(const struct msm_gpio *table, int size);
-
-/* GPIO TLMM (Top Level Multiplexing) Definitions */
-
-/* GPIO TLMM: Function -- GPIO specific */
-
-/* GPIO TLMM: Direction */
-enum {
- GPIO_INPUT,
- GPIO_OUTPUT,
-};
-
-/* GPIO TLMM: Pullup/Pulldown */
-enum {
- GPIO_NO_PULL,
- GPIO_PULL_DOWN,
- GPIO_KEEPER,
- GPIO_PULL_UP,
-};
-
-/* GPIO TLMM: Drive Strength */
-enum {
- GPIO_2MA,
- GPIO_4MA,
- GPIO_6MA,
- GPIO_8MA,
- GPIO_10MA,
- GPIO_12MA,
- GPIO_14MA,
- GPIO_16MA,
-};
-
-enum {
- GPIO_ENABLE,
- GPIO_DISABLE,
-};
-
-#define GPIO_CFG(gpio, func, dir, pull, drvstr) \
- ((((gpio) & 0x3FF) << 4) | \
- ((func) & 0xf) | \
- (((dir) & 0x1) << 14) | \
- (((pull) & 0x3) << 15) | \
- (((drvstr) & 0xF) << 17))
-
-/**
- * extract GPIO pin from bit-field used for gpio_tlmm_config
- */
-#define GPIO_PIN(gpio_cfg) (((gpio_cfg) >> 4) & 0x3ff)
-#define GPIO_FUNC(gpio_cfg) (((gpio_cfg) >> 0) & 0xf)
-#define GPIO_DIR(gpio_cfg) (((gpio_cfg) >> 14) & 0x1)
-#define GPIO_PULL(gpio_cfg) (((gpio_cfg) >> 15) & 0x3)
-#define GPIO_DRVSTR(gpio_cfg) (((gpio_cfg) >> 17) & 0xf)
-
-int gpio_tlmm_config(unsigned config, unsigned disable);
-
#endif /* __ASM_ARCH_MSM_GPIO_H */
diff --git a/arch/arm/mach-msm/include/mach/io.h b/arch/arm/mach-msm/include/mach/io.h
index c35b29f..7386e73 100644
--- a/arch/arm/mach-msm/include/mach/io.h
+++ b/arch/arm/mach-msm/include/mach/io.h
@@ -28,6 +28,7 @@
void msm_map_qsd8x50_io(void);
void msm_map_msm7x30_io(void);
+void msm_map_msm8x60_io(void);
extern unsigned int msm_shared_ram_phys;
diff --git a/arch/arm/mach-msm/include/mach/iommu.h b/arch/arm/mach-msm/include/mach/iommu.h
new file mode 100644
index 0000000..218ef57
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/iommu.h
@@ -0,0 +1,103 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef MSM_IOMMU_H
+#define MSM_IOMMU_H
+
+#include <linux/interrupt.h>
+
+/* Maximum number of Machine IDs that we are allowing to be mapped to the same
+ * context bank. The number of MIDs mapped to the same CB does not affect
+ * performance, but there is a practical limit on how many distinct MIDs may
+ * be present. These mappings are typically determined at design time and are
+ * not expected to change at run time.
+ */
+#define MAX_NUM_MIDS 16
+
+/**
+ * struct msm_iommu_dev - a single IOMMU hardware instance
+ * name Human-readable name given to this IOMMU HW instance
+ * clk_rate Rate to set for this IOMMU's clock, if applicable to this
+ * particular IOMMU. 0 means don't set a rate.
+ * -1 means it is an AXI clock with no valid rate
+ *
+ */
+struct msm_iommu_dev {
+ const char *name;
+ int clk_rate;
+};
+
+/**
+ * struct msm_iommu_ctx_dev - an IOMMU context bank instance
+ * name Human-readable name given to this context bank
+ * num Index of this context bank within the hardware
+ * mids List of Machine IDs that are to be mapped into this context
+ * bank, terminated by -1. The MID is a set of signals on the
+ * AXI bus that identifies the function associated with a specific
+ * memory request. (See ARM spec).
+ */
+struct msm_iommu_ctx_dev {
+ const char *name;
+ int num;
+ int mids[MAX_NUM_MIDS];
+};
+
+
+/**
+ * struct msm_iommu_drvdata - A single IOMMU hardware instance
+ * @base: IOMMU config port base address (VA)
+ * @irq: Interrupt number
+ *
+ * A msm_iommu_drvdata holds the global driver data about a single piece
+ * of an IOMMU hardware instance.
+ */
+struct msm_iommu_drvdata {
+ void __iomem *base;
+ int irq;
+};
+
+/**
+ * struct msm_iommu_ctx_drvdata - an IOMMU context bank instance
+ * @num: Hardware context number of this context
+ * @pdev: Platform device associated wit this HW instance
+ * @attached_elm: List element for domains to track which devices are
+ * attached to them
+ *
+ * A msm_iommu_ctx_drvdata holds the driver data for a single context bank
+ * within each IOMMU hardware instance
+ */
+struct msm_iommu_ctx_drvdata {
+ int num;
+ struct platform_device *pdev;
+ struct list_head attached_elm;
+};
+
+/*
+ * Look up an IOMMU context device by its context name. NULL if none found.
+ * Useful for testing and drivers that do not yet fully have IOMMU stuff in
+ * their platform devices.
+ */
+struct device *msm_iommu_get_ctx(const char *ctx_name);
+
+/*
+ * Interrupt handler for the IOMMU context fault interrupt. Hooking the
+ * interrupt is not supported in the API yet, but this will print an error
+ * message and dump useful IOMMU registers.
+ */
+irqreturn_t msm_iommu_fault_handler(int irq, void *dev_id);
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/iommu_hw-8xxx.h b/arch/arm/mach-msm/include/mach/iommu_hw-8xxx.h
new file mode 100644
index 0000000..f9386d3
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/iommu_hw-8xxx.h
@@ -0,0 +1,1871 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef __ARCH_ARM_MACH_MSM_IOMMU_HW_8XXX_H
+#define __ARCH_ARM_MACH_MSM_IOMMU_HW_8XXX_H
+
+#define CTX_SHIFT 12
+
+#define GET_GLOBAL_REG(reg, base) (readl((base) + (reg)))
+#define GET_CTX_REG(reg, base, ctx) \
+ (readl((base) + (reg) + ((ctx) << CTX_SHIFT)))
+
+#define SET_GLOBAL_REG(reg, base, val) writel((val), ((base) + (reg)))
+
+#define SET_CTX_REG(reg, base, ctx, val) \
+ writel((val), ((base) + (reg) + ((ctx) << CTX_SHIFT)))
+
+/* Wrappers for numbered registers */
+#define SET_GLOBAL_REG_N(b, n, r, v) SET_GLOBAL_REG(b, ((r) + (n << 2)), (v))
+#define GET_GLOBAL_REG_N(b, n, r) GET_GLOBAL_REG(b, ((r) + (n << 2)))
+
+/* Field wrappers */
+#define GET_GLOBAL_FIELD(b, r, F) GET_FIELD(((b) + (r)), F##_MASK, F##_SHIFT)
+#define GET_CONTEXT_FIELD(b, c, r, F) \
+ GET_FIELD(((b) + (r) + ((c) << CTX_SHIFT)), F##_MASK, F##_SHIFT)
+
+#define SET_GLOBAL_FIELD(b, r, F, v) \
+ SET_FIELD(((b) + (r)), F##_MASK, F##_SHIFT, (v))
+#define SET_CONTEXT_FIELD(b, c, r, F, v) \
+ SET_FIELD(((b) + (r) + ((c) << CTX_SHIFT)), F##_MASK, F##_SHIFT, (v))
+
+#define GET_FIELD(addr, mask, shift) ((readl(addr) >> (shift)) & (mask))
+
+#define SET_FIELD(addr, mask, shift, v) \
+do { \
+ int t = readl(addr); \
+ writel((t & ~((mask) << (shift))) + (((v) & (mask)) << (shift)), addr);\
+} while (0)
+
+
+#define NUM_FL_PTE 4096
+#define NUM_SL_PTE 256
+
+/* First-level page table bits */
+#define FL_BASE_MASK 0xFFFFFC00
+#define FL_TYPE_TABLE (1 << 0)
+#define FL_TYPE_SECT (2 << 0)
+#define FL_SUPERSECTION (1 << 18)
+#define FL_AP_WRITE (1 << 10)
+#define FL_AP_READ (1 << 11)
+#define FL_SHARED (1 << 16)
+#define FL_OFFSET(va) (((va) & 0xFFF00000) >> 20)
+
+/* Second-level page table bits */
+#define SL_BASE_MASK_LARGE 0xFFFF0000
+#define SL_BASE_MASK_SMALL 0xFFFFF000
+#define SL_TYPE_LARGE (1 << 0)
+#define SL_TYPE_SMALL (2 << 0)
+#define SL_AP0 (1 << 4)
+#define SL_AP1 (2 << 4)
+#define SL_SHARED (1 << 10)
+#define SL_OFFSET(va) (((va) & 0xFF000) >> 12)
+
+/* Global register setters / getters */
+#define SET_M2VCBR_N(b, N, v) SET_GLOBAL_REG_N(M2VCBR_N, N, (b), (v))
+#define SET_CBACR_N(b, N, v) SET_GLOBAL_REG_N(CBACR_N, N, (b), (v))
+#define SET_TLBRSW(b, v) SET_GLOBAL_REG(TLBRSW, (b), (v))
+#define SET_TLBTR0(b, v) SET_GLOBAL_REG(TLBTR0, (b), (v))
+#define SET_TLBTR1(b, v) SET_GLOBAL_REG(TLBTR1, (b), (v))
+#define SET_TLBTR2(b, v) SET_GLOBAL_REG(TLBTR2, (b), (v))
+#define SET_TESTBUSCR(b, v) SET_GLOBAL_REG(TESTBUSCR, (b), (v))
+#define SET_GLOBAL_TLBIALL(b, v) SET_GLOBAL_REG(GLOBAL_TLBIALL, (b), (v))
+#define SET_TLBIVMID(b, v) SET_GLOBAL_REG(TLBIVMID, (b), (v))
+#define SET_CR(b, v) SET_GLOBAL_REG(CR, (b), (v))
+#define SET_EAR(b, v) SET_GLOBAL_REG(EAR, (b), (v))
+#define SET_ESR(b, v) SET_GLOBAL_REG(ESR, (b), (v))
+#define SET_ESRRESTORE(b, v) SET_GLOBAL_REG(ESRRESTORE, (b), (v))
+#define SET_ESYNR0(b, v) SET_GLOBAL_REG(ESYNR0, (b), (v))
+#define SET_ESYNR1(b, v) SET_GLOBAL_REG(ESYNR1, (b), (v))
+#define SET_RPU_ACR(b, v) SET_GLOBAL_REG(RPU_ACR, (b), (v))
+
+#define GET_M2VCBR_N(b, N) GET_GLOBAL_REG_N(M2VCBR_N, N, (b))
+#define GET_CBACR_N(b, N) GET_GLOBAL_REG_N(CBACR_N, N, (b))
+#define GET_TLBTR0(b) GET_GLOBAL_REG(TLBTR0, (b))
+#define GET_TLBTR1(b) GET_GLOBAL_REG(TLBTR1, (b))
+#define GET_TLBTR2(b) GET_GLOBAL_REG(TLBTR2, (b))
+#define GET_TESTBUSCR(b) GET_GLOBAL_REG(TESTBUSCR, (b))
+#define GET_GLOBAL_TLBIALL(b) GET_GLOBAL_REG(GLOBAL_TLBIALL, (b))
+#define GET_TLBIVMID(b) GET_GLOBAL_REG(TLBIVMID, (b))
+#define GET_CR(b) GET_GLOBAL_REG(CR, (b))
+#define GET_EAR(b) GET_GLOBAL_REG(EAR, (b))
+#define GET_ESR(b) GET_GLOBAL_REG(ESR, (b))
+#define GET_ESRRESTORE(b) GET_GLOBAL_REG(ESRRESTORE, (b))
+#define GET_ESYNR0(b) GET_GLOBAL_REG(ESYNR0, (b))
+#define GET_ESYNR1(b) GET_GLOBAL_REG(ESYNR1, (b))
+#define GET_REV(b) GET_GLOBAL_REG(REV, (b))
+#define GET_IDR(b) GET_GLOBAL_REG(IDR, (b))
+#define GET_RPU_ACR(b) GET_GLOBAL_REG(RPU_ACR, (b))
+
+
+/* Context register setters/getters */
+#define SET_SCTLR(b, c, v) SET_CTX_REG(SCTLR, (b), (c), (v))
+#define SET_ACTLR(b, c, v) SET_CTX_REG(ACTLR, (b), (c), (v))
+#define SET_CONTEXTIDR(b, c, v) SET_CTX_REG(CONTEXTIDR, (b), (c), (v))
+#define SET_TTBR0(b, c, v) SET_CTX_REG(TTBR0, (b), (c), (v))
+#define SET_TTBR1(b, c, v) SET_CTX_REG(TTBR1, (b), (c), (v))
+#define SET_TTBCR(b, c, v) SET_CTX_REG(TTBCR, (b), (c), (v))
+#define SET_PAR(b, c, v) SET_CTX_REG(PAR, (b), (c), (v))
+#define SET_FSR(b, c, v) SET_CTX_REG(FSR, (b), (c), (v))
+#define SET_FSRRESTORE(b, c, v) SET_CTX_REG(FSRRESTORE, (b), (c), (v))
+#define SET_FAR(b, c, v) SET_CTX_REG(FAR, (b), (c), (v))
+#define SET_FSYNR0(b, c, v) SET_CTX_REG(FSYNR0, (b), (c), (v))
+#define SET_FSYNR1(b, c, v) SET_CTX_REG(FSYNR1, (b), (c), (v))
+#define SET_PRRR(b, c, v) SET_CTX_REG(PRRR, (b), (c), (v))
+#define SET_NMRR(b, c, v) SET_CTX_REG(NMRR, (b), (c), (v))
+#define SET_TLBLKCR(b, c, v) SET_CTX_REG(TLBLCKR, (b), (c), (v))
+#define SET_V2PSR(b, c, v) SET_CTX_REG(V2PSR, (b), (c), (v))
+#define SET_TLBFLPTER(b, c, v) SET_CTX_REG(TLBFLPTER, (b), (c), (v))
+#define SET_TLBSLPTER(b, c, v) SET_CTX_REG(TLBSLPTER, (b), (c), (v))
+#define SET_BFBCR(b, c, v) SET_CTX_REG(BFBCR, (b), (c), (v))
+#define SET_CTX_TLBIALL(b, c, v) SET_CTX_REG(CTX_TLBIALL, (b), (c), (v))
+#define SET_TLBIASID(b, c, v) SET_CTX_REG(TLBIASID, (b), (c), (v))
+#define SET_TLBIVA(b, c, v) SET_CTX_REG(TLBIVA, (b), (c), (v))
+#define SET_TLBIVAA(b, c, v) SET_CTX_REG(TLBIVAA, (b), (c), (v))
+#define SET_V2PPR(b, c, v) SET_CTX_REG(V2PPR, (b), (c), (v))
+#define SET_V2PPW(b, c, v) SET_CTX_REG(V2PPW, (b), (c), (v))
+#define SET_V2PUR(b, c, v) SET_CTX_REG(V2PUR, (b), (c), (v))
+#define SET_V2PUW(b, c, v) SET_CTX_REG(V2PUW, (b), (c), (v))
+#define SET_RESUME(b, c, v) SET_CTX_REG(RESUME, (b), (c), (v))
+
+#define GET_SCTLR(b, c) GET_CTX_REG(SCTLR, (b), (c))
+#define GET_ACTLR(b, c) GET_CTX_REG(ACTLR, (b), (c))
+#define GET_CONTEXTIDR(b, c) GET_CTX_REG(CONTEXTIDR, (b), (c))
+#define GET_TTBR0(b, c) GET_CTX_REG(TTBR0, (b), (c))
+#define GET_TTBR1(b, c) GET_CTX_REG(TTBR1, (b), (c))
+#define GET_TTBCR(b, c) GET_CTX_REG(TTBCR, (b), (c))
+#define GET_PAR(b, c) GET_CTX_REG(PAR, (b), (c))
+#define GET_FSR(b, c) GET_CTX_REG(FSR, (b), (c))
+#define GET_FSRRESTORE(b, c) GET_CTX_REG(FSRRESTORE, (b), (c))
+#define GET_FAR(b, c) GET_CTX_REG(FAR, (b), (c))
+#define GET_FSYNR0(b, c) GET_CTX_REG(FSYNR0, (b), (c))
+#define GET_FSYNR1(b, c) GET_CTX_REG(FSYNR1, (b), (c))
+#define GET_PRRR(b, c) GET_CTX_REG(PRRR, (b), (c))
+#define GET_NMRR(b, c) GET_CTX_REG(NMRR, (b), (c))
+#define GET_TLBLCKR(b, c) GET_CTX_REG(TLBLCKR, (b), (c))
+#define GET_V2PSR(b, c) GET_CTX_REG(V2PSR, (b), (c))
+#define GET_TLBFLPTER(b, c) GET_CTX_REG(TLBFLPTER, (b), (c))
+#define GET_TLBSLPTER(b, c) GET_CTX_REG(TLBSLPTER, (b), (c))
+#define GET_BFBCR(b, c) GET_CTX_REG(BFBCR, (b), (c))
+#define GET_CTX_TLBIALL(b, c) GET_CTX_REG(CTX_TLBIALL, (b), (c))
+#define GET_TLBIASID(b, c) GET_CTX_REG(TLBIASID, (b), (c))
+#define GET_TLBIVA(b, c) GET_CTX_REG(TLBIVA, (b), (c))
+#define GET_TLBIVAA(b, c) GET_CTX_REG(TLBIVAA, (b), (c))
+#define GET_V2PPR(b, c) GET_CTX_REG(V2PPR, (b), (c))
+#define GET_V2PPW(b, c) GET_CTX_REG(V2PPW, (b), (c))
+#define GET_V2PUR(b, c) GET_CTX_REG(V2PUR, (b), (c))
+#define GET_V2PUW(b, c) GET_CTX_REG(V2PUW, (b), (c))
+#define GET_RESUME(b, c) GET_CTX_REG(RESUME, (b), (c))
+
+
+/* Global field setters / getters */
+/* Global Field Setters: */
+/* CBACR_N */
+#define SET_RWVMID(b, n, v) SET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), RWVMID, v)
+#define SET_RWE(b, n, v) SET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), RWE, v)
+#define SET_RWGE(b, n, v) SET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), RWGE, v)
+#define SET_CBVMID(b, n, v) SET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), CBVMID, v)
+#define SET_IRPTNDX(b, n, v) SET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), IRPTNDX, v)
+
+
+/* M2VCBR_N */
+#define SET_VMID(b, n, v) SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), VMID, v)
+#define SET_CBNDX(b, n, v) SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), CBNDX, v)
+#define SET_BYPASSD(b, n, v) SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BYPASSD, v)
+#define SET_BPRCOSH(b, n, v) SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPRCOSH, v)
+#define SET_BPRCISH(b, n, v) SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPRCISH, v)
+#define SET_BPRCNSH(b, n, v) SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPRCNSH, v)
+#define SET_BPSHCFG(b, n, v) SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPSHCFG, v)
+#define SET_NSCFG(b, n, v) SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), NSCFG, v)
+#define SET_BPMTCFG(b, n, v) SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPMTCFG, v)
+#define SET_BPMEMTYPE(b, n, v) \
+ SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPMEMTYPE, v)
+
+
+/* CR */
+#define SET_RPUE(b, v) SET_GLOBAL_FIELD(b, CR, RPUE, v)
+#define SET_RPUERE(b, v) SET_GLOBAL_FIELD(b, CR, RPUERE, v)
+#define SET_RPUEIE(b, v) SET_GLOBAL_FIELD(b, CR, RPUEIE, v)
+#define SET_DCDEE(b, v) SET_GLOBAL_FIELD(b, CR, DCDEE, v)
+#define SET_CLIENTPD(b, v) SET_GLOBAL_FIELD(b, CR, CLIENTPD, v)
+#define SET_STALLD(b, v) SET_GLOBAL_FIELD(b, CR, STALLD, v)
+#define SET_TLBLKCRWE(b, v) SET_GLOBAL_FIELD(b, CR, TLBLKCRWE, v)
+#define SET_CR_TLBIALLCFG(b, v) SET_GLOBAL_FIELD(b, CR, CR_TLBIALLCFG, v)
+#define SET_TLBIVMIDCFG(b, v) SET_GLOBAL_FIELD(b, CR, TLBIVMIDCFG, v)
+#define SET_CR_HUME(b, v) SET_GLOBAL_FIELD(b, CR, CR_HUME, v)
+
+
+/* ESR */
+#define SET_CFG(b, v) SET_GLOBAL_FIELD(b, ESR, CFG, v)
+#define SET_BYPASS(b, v) SET_GLOBAL_FIELD(b, ESR, BYPASS, v)
+#define SET_ESR_MULTI(b, v) SET_GLOBAL_FIELD(b, ESR, ESR_MULTI, v)
+
+
+/* ESYNR0 */
+#define SET_ESYNR0_AMID(b, v) SET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_AMID, v)
+#define SET_ESYNR0_APID(b, v) SET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_APID, v)
+#define SET_ESYNR0_ABID(b, v) SET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_ABID, v)
+#define SET_ESYNR0_AVMID(b, v) SET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_AVMID, v)
+#define SET_ESYNR0_ATID(b, v) SET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_ATID, v)
+
+
+/* ESYNR1 */
+#define SET_ESYNR1_AMEMTYPE(b, v) \
+ SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AMEMTYPE, v)
+#define SET_ESYNR1_ASHARED(b, v) SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ASHARED, v)
+#define SET_ESYNR1_AINNERSHARED(b, v) \
+ SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AINNERSHARED, v)
+#define SET_ESYNR1_APRIV(b, v) SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_APRIV, v)
+#define SET_ESYNR1_APROTNS(b, v) SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_APROTNS, v)
+#define SET_ESYNR1_AINST(b, v) SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AINST, v)
+#define SET_ESYNR1_AWRITE(b, v) SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AWRITE, v)
+#define SET_ESYNR1_ABURST(b, v) SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ABURST, v)
+#define SET_ESYNR1_ALEN(b, v) SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ALEN, v)
+#define SET_ESYNR1_ASIZE(b, v) SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ASIZE, v)
+#define SET_ESYNR1_ALOCK(b, v) SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ALOCK, v)
+#define SET_ESYNR1_AOOO(b, v) SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AOOO, v)
+#define SET_ESYNR1_AFULL(b, v) SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AFULL, v)
+#define SET_ESYNR1_AC(b, v) SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AC, v)
+#define SET_ESYNR1_DCD(b, v) SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_DCD, v)
+
+
+/* TESTBUSCR */
+#define SET_TBE(b, v) SET_GLOBAL_FIELD(b, TESTBUSCR, TBE, v)
+#define SET_SPDMBE(b, v) SET_GLOBAL_FIELD(b, TESTBUSCR, SPDMBE, v)
+#define SET_WGSEL(b, v) SET_GLOBAL_FIELD(b, TESTBUSCR, WGSEL, v)
+#define SET_TBLSEL(b, v) SET_GLOBAL_FIELD(b, TESTBUSCR, TBLSEL, v)
+#define SET_TBHSEL(b, v) SET_GLOBAL_FIELD(b, TESTBUSCR, TBHSEL, v)
+#define SET_SPDM0SEL(b, v) SET_GLOBAL_FIELD(b, TESTBUSCR, SPDM0SEL, v)
+#define SET_SPDM1SEL(b, v) SET_GLOBAL_FIELD(b, TESTBUSCR, SPDM1SEL, v)
+#define SET_SPDM2SEL(b, v) SET_GLOBAL_FIELD(b, TESTBUSCR, SPDM2SEL, v)
+#define SET_SPDM3SEL(b, v) SET_GLOBAL_FIELD(b, TESTBUSCR, SPDM3SEL, v)
+
+
+/* TLBIVMID */
+#define SET_TLBIVMID_VMID(b, v) SET_GLOBAL_FIELD(b, TLBIVMID, TLBIVMID_VMID, v)
+
+
+/* TLBRSW */
+#define SET_TLBRSW_INDEX(b, v) SET_GLOBAL_FIELD(b, TLBRSW, TLBRSW_INDEX, v)
+#define SET_TLBBFBS(b, v) SET_GLOBAL_FIELD(b, TLBRSW, TLBBFBS, v)
+
+
+/* TLBTR0 */
+#define SET_PR(b, v) SET_GLOBAL_FIELD(b, TLBTR0, PR, v)
+#define SET_PW(b, v) SET_GLOBAL_FIELD(b, TLBTR0, PW, v)
+#define SET_UR(b, v) SET_GLOBAL_FIELD(b, TLBTR0, UR, v)
+#define SET_UW(b, v) SET_GLOBAL_FIELD(b, TLBTR0, UW, v)
+#define SET_XN(b, v) SET_GLOBAL_FIELD(b, TLBTR0, XN, v)
+#define SET_NSDESC(b, v) SET_GLOBAL_FIELD(b, TLBTR0, NSDESC, v)
+#define SET_ISH(b, v) SET_GLOBAL_FIELD(b, TLBTR0, ISH, v)
+#define SET_SH(b, v) SET_GLOBAL_FIELD(b, TLBTR0, SH, v)
+#define SET_MT(b, v) SET_GLOBAL_FIELD(b, TLBTR0, MT, v)
+#define SET_DPSIZR(b, v) SET_GLOBAL_FIELD(b, TLBTR0, DPSIZR, v)
+#define SET_DPSIZC(b, v) SET_GLOBAL_FIELD(b, TLBTR0, DPSIZC, v)
+
+
+/* TLBTR1 */
+#define SET_TLBTR1_VMID(b, v) SET_GLOBAL_FIELD(b, TLBTR1, TLBTR1_VMID, v)
+#define SET_TLBTR1_PA(b, v) SET_GLOBAL_FIELD(b, TLBTR1, TLBTR1_PA, v)
+
+
+/* TLBTR2 */
+#define SET_TLBTR2_ASID(b, v) SET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_ASID, v)
+#define SET_TLBTR2_V(b, v) SET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_V, v)
+#define SET_TLBTR2_NSTID(b, v) SET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_NSTID, v)
+#define SET_TLBTR2_NV(b, v) SET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_NV, v)
+#define SET_TLBTR2_VA(b, v) SET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_VA, v)
+
+
+/* Global Field Getters */
+/* CBACR_N */
+#define GET_RWVMID(b, n) GET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), RWVMID)
+#define GET_RWE(b, n) GET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), RWE)
+#define GET_RWGE(b, n) GET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), RWGE)
+#define GET_CBVMID(b, n) GET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), CBVMID)
+#define GET_IRPTNDX(b, n) GET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), IRPTNDX)
+
+
+/* M2VCBR_N */
+#define GET_VMID(b, n) GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), VMID)
+#define GET_CBNDX(b, n) GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), CBNDX)
+#define GET_BYPASSD(b, n) GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BYPASSD)
+#define GET_BPRCOSH(b, n) GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPRCOSH)
+#define GET_BPRCISH(b, n) GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPRCISH)
+#define GET_BPRCNSH(b, n) GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPRCNSH)
+#define GET_BPSHCFG(b, n) GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPSHCFG)
+#define GET_NSCFG(b, n) GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), NSCFG)
+#define GET_BPMTCFG(b, n) GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPMTCFG)
+#define GET_BPMEMTYPE(b, n) GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPMEMTYPE)
+
+
+/* CR */
+#define GET_RPUE(b) GET_GLOBAL_FIELD(b, CR, RPUE)
+#define GET_RPUERE(b) GET_GLOBAL_FIELD(b, CR, RPUERE)
+#define GET_RPUEIE(b) GET_GLOBAL_FIELD(b, CR, RPUEIE)
+#define GET_DCDEE(b) GET_GLOBAL_FIELD(b, CR, DCDEE)
+#define GET_CLIENTPD(b) GET_GLOBAL_FIELD(b, CR, CLIENTPD)
+#define GET_STALLD(b) GET_GLOBAL_FIELD(b, CR, STALLD)
+#define GET_TLBLKCRWE(b) GET_GLOBAL_FIELD(b, CR, TLBLKCRWE)
+#define GET_CR_TLBIALLCFG(b) GET_GLOBAL_FIELD(b, CR, CR_TLBIALLCFG)
+#define GET_TLBIVMIDCFG(b) GET_GLOBAL_FIELD(b, CR, TLBIVMIDCFG)
+#define GET_CR_HUME(b) GET_GLOBAL_FIELD(b, CR, CR_HUME)
+
+
+/* ESR */
+#define GET_CFG(b) GET_GLOBAL_FIELD(b, ESR, CFG)
+#define GET_BYPASS(b) GET_GLOBAL_FIELD(b, ESR, BYPASS)
+#define GET_ESR_MULTI(b) GET_GLOBAL_FIELD(b, ESR, ESR_MULTI)
+
+
+/* ESYNR0 */
+#define GET_ESYNR0_AMID(b) GET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_AMID)
+#define GET_ESYNR0_APID(b) GET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_APID)
+#define GET_ESYNR0_ABID(b) GET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_ABID)
+#define GET_ESYNR0_AVMID(b) GET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_AVMID)
+#define GET_ESYNR0_ATID(b) GET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_ATID)
+
+
+/* ESYNR1 */
+#define GET_ESYNR1_AMEMTYPE(b) GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AMEMTYPE)
+#define GET_ESYNR1_ASHARED(b) GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ASHARED)
+#define GET_ESYNR1_AINNERSHARED(b) \
+ GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AINNERSHARED)
+#define GET_ESYNR1_APRIV(b) GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_APRIV)
+#define GET_ESYNR1_APROTNS(b) GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_APROTNS)
+#define GET_ESYNR1_AINST(b) GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AINST)
+#define GET_ESYNR1_AWRITE(b) GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AWRITE)
+#define GET_ESYNR1_ABURST(b) GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ABURST)
+#define GET_ESYNR1_ALEN(b) GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ALEN)
+#define GET_ESYNR1_ASIZE(b) GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ASIZE)
+#define GET_ESYNR1_ALOCK(b) GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ALOCK)
+#define GET_ESYNR1_AOOO(b) GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AOOO)
+#define GET_ESYNR1_AFULL(b) GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AFULL)
+#define GET_ESYNR1_AC(b) GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AC)
+#define GET_ESYNR1_DCD(b) GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_DCD)
+
+
+/* IDR */
+#define GET_NM2VCBMT(b) GET_GLOBAL_FIELD(b, IDR, NM2VCBMT)
+#define GET_HTW(b) GET_GLOBAL_FIELD(b, IDR, HTW)
+#define GET_HUM(b) GET_GLOBAL_FIELD(b, IDR, HUM)
+#define GET_TLBSIZE(b) GET_GLOBAL_FIELD(b, IDR, TLBSIZE)
+#define GET_NCB(b) GET_GLOBAL_FIELD(b, IDR, NCB)
+#define GET_NIRPT(b) GET_GLOBAL_FIELD(b, IDR, NIRPT)
+
+
+/* REV */
+#define GET_MAJOR(b) GET_GLOBAL_FIELD(b, REV, MAJOR)
+#define GET_MINOR(b) GET_GLOBAL_FIELD(b, REV, MINOR)
+
+
+/* TESTBUSCR */
+#define GET_TBE(b) GET_GLOBAL_FIELD(b, TESTBUSCR, TBE)
+#define GET_SPDMBE(b) GET_GLOBAL_FIELD(b, TESTBUSCR, SPDMBE)
+#define GET_WGSEL(b) GET_GLOBAL_FIELD(b, TESTBUSCR, WGSEL)
+#define GET_TBLSEL(b) GET_GLOBAL_FIELD(b, TESTBUSCR, TBLSEL)
+#define GET_TBHSEL(b) GET_GLOBAL_FIELD(b, TESTBUSCR, TBHSEL)
+#define GET_SPDM0SEL(b) GET_GLOBAL_FIELD(b, TESTBUSCR, SPDM0SEL)
+#define GET_SPDM1SEL(b) GET_GLOBAL_FIELD(b, TESTBUSCR, SPDM1SEL)
+#define GET_SPDM2SEL(b) GET_GLOBAL_FIELD(b, TESTBUSCR, SPDM2SEL)
+#define GET_SPDM3SEL(b) GET_GLOBAL_FIELD(b, TESTBUSCR, SPDM3SEL)
+
+
+/* TLBIVMID */
+#define GET_TLBIVMID_VMID(b) GET_GLOBAL_FIELD(b, TLBIVMID, TLBIVMID_VMID)
+
+
+/* TLBTR0 */
+#define GET_PR(b) GET_GLOBAL_FIELD(b, TLBTR0, PR)
+#define GET_PW(b) GET_GLOBAL_FIELD(b, TLBTR0, PW)
+#define GET_UR(b) GET_GLOBAL_FIELD(b, TLBTR0, UR)
+#define GET_UW(b) GET_GLOBAL_FIELD(b, TLBTR0, UW)
+#define GET_XN(b) GET_GLOBAL_FIELD(b, TLBTR0, XN)
+#define GET_NSDESC(b) GET_GLOBAL_FIELD(b, TLBTR0, NSDESC)
+#define GET_ISH(b) GET_GLOBAL_FIELD(b, TLBTR0, ISH)
+#define GET_SH(b) GET_GLOBAL_FIELD(b, TLBTR0, SH)
+#define GET_MT(b) GET_GLOBAL_FIELD(b, TLBTR0, MT)
+#define GET_DPSIZR(b) GET_GLOBAL_FIELD(b, TLBTR0, DPSIZR)
+#define GET_DPSIZC(b) GET_GLOBAL_FIELD(b, TLBTR0, DPSIZC)
+
+
+/* TLBTR1 */
+#define GET_TLBTR1_VMID(b) GET_GLOBAL_FIELD(b, TLBTR1, TLBTR1_VMID)
+#define GET_TLBTR1_PA(b) GET_GLOBAL_FIELD(b, TLBTR1, TLBTR1_PA)
+
+
+/* TLBTR2 */
+#define GET_TLBTR2_ASID(b) GET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_ASID)
+#define GET_TLBTR2_V(b) GET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_V)
+#define GET_TLBTR2_NSTID(b) GET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_NSTID)
+#define GET_TLBTR2_NV(b) GET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_NV)
+#define GET_TLBTR2_VA(b) GET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_VA)
+
+
+/* Context Register setters / getters */
+/* Context Register setters */
+/* ACTLR */
+#define SET_CFERE(b, c, v) SET_CONTEXT_FIELD(b, c, ACTLR, CFERE, v)
+#define SET_CFEIE(b, c, v) SET_CONTEXT_FIELD(b, c, ACTLR, CFEIE, v)
+#define SET_PTSHCFG(b, c, v) SET_CONTEXT_FIELD(b, c, ACTLR, PTSHCFG, v)
+#define SET_RCOSH(b, c, v) SET_CONTEXT_FIELD(b, c, ACTLR, RCOSH, v)
+#define SET_RCISH(b, c, v) SET_CONTEXT_FIELD(b, c, ACTLR, RCISH, v)
+#define SET_RCNSH(b, c, v) SET_CONTEXT_FIELD(b, c, ACTLR, RCNSH, v)
+#define SET_PRIVCFG(b, c, v) SET_CONTEXT_FIELD(b, c, ACTLR, PRIVCFG, v)
+#define SET_DNA(b, c, v) SET_CONTEXT_FIELD(b, c, ACTLR, DNA, v)
+#define SET_DNLV2PA(b, c, v) SET_CONTEXT_FIELD(b, c, ACTLR, DNLV2PA, v)
+#define SET_TLBMCFG(b, c, v) SET_CONTEXT_FIELD(b, c, ACTLR, TLBMCFG, v)
+#define SET_CFCFG(b, c, v) SET_CONTEXT_FIELD(b, c, ACTLR, CFCFG, v)
+#define SET_TIPCF(b, c, v) SET_CONTEXT_FIELD(b, c, ACTLR, TIPCF, v)
+#define SET_V2PCFG(b, c, v) SET_CONTEXT_FIELD(b, c, ACTLR, V2PCFG, v)
+#define SET_HUME(b, c, v) SET_CONTEXT_FIELD(b, c, ACTLR, HUME, v)
+#define SET_PTMTCFG(b, c, v) SET_CONTEXT_FIELD(b, c, ACTLR, PTMTCFG, v)
+#define SET_PTMEMTYPE(b, c, v) SET_CONTEXT_FIELD(b, c, ACTLR, PTMEMTYPE, v)
+
+
+/* BFBCR */
+#define SET_BFBDFE(b, c, v) SET_CONTEXT_FIELD(b, c, BFBCR, BFBDFE, v)
+#define SET_BFBSFE(b, c, v) SET_CONTEXT_FIELD(b, c, BFBCR, BFBSFE, v)
+#define SET_SFVS(b, c, v) SET_CONTEXT_FIELD(b, c, BFBCR, SFVS, v)
+#define SET_FLVIC(b, c, v) SET_CONTEXT_FIELD(b, c, BFBCR, FLVIC, v)
+#define SET_SLVIC(b, c, v) SET_CONTEXT_FIELD(b, c, BFBCR, SLVIC, v)
+
+
+/* CONTEXTIDR */
+#define SET_CONTEXTIDR_ASID(b, c, v) \
+ SET_CONTEXT_FIELD(b, c, CONTEXTIDR, CONTEXTIDR_ASID, v)
+#define SET_CONTEXTIDR_PROCID(b, c, v) \
+ SET_CONTEXT_FIELD(b, c, CONTEXTIDR, PROCID, v)
+
+
+/* FSR */
+#define SET_TF(b, c, v) SET_CONTEXT_FIELD(b, c, FSR, TF, v)
+#define SET_AFF(b, c, v) SET_CONTEXT_FIELD(b, c, FSR, AFF, v)
+#define SET_APF(b, c, v) SET_CONTEXT_FIELD(b, c, FSR, APF, v)
+#define SET_TLBMF(b, c, v) SET_CONTEXT_FIELD(b, c, FSR, TLBMF, v)
+#define SET_HTWDEEF(b, c, v) SET_CONTEXT_FIELD(b, c, FSR, HTWDEEF, v)
+#define SET_HTWSEEF(b, c, v) SET_CONTEXT_FIELD(b, c, FSR, HTWSEEF, v)
+#define SET_MHF(b, c, v) SET_CONTEXT_FIELD(b, c, FSR, MHF, v)
+#define SET_SL(b, c, v) SET_CONTEXT_FIELD(b, c, FSR, SL, v)
+#define SET_SS(b, c, v) SET_CONTEXT_FIELD(b, c, FSR, SS, v)
+#define SET_MULTI(b, c, v) SET_CONTEXT_FIELD(b, c, FSR, MULTI, v)
+
+
+/* FSYNR0 */
+#define SET_AMID(b, c, v) SET_CONTEXT_FIELD(b, c, FSYNR0, AMID, v)
+#define SET_APID(b, c, v) SET_CONTEXT_FIELD(b, c, FSYNR0, APID, v)
+#define SET_ABID(b, c, v) SET_CONTEXT_FIELD(b, c, FSYNR0, ABID, v)
+#define SET_ATID(b, c, v) SET_CONTEXT_FIELD(b, c, FSYNR0, ATID, v)
+
+
+/* FSYNR1 */
+#define SET_AMEMTYPE(b, c, v) SET_CONTEXT_FIELD(b, c, FSYNR1, AMEMTYPE, v)
+#define SET_ASHARED(b, c, v) SET_CONTEXT_FIELD(b, c, FSYNR1, ASHARED, v)
+#define SET_AINNERSHARED(b, c, v) \
+ SET_CONTEXT_FIELD(b, c, FSYNR1, AINNERSHARED, v)
+#define SET_APRIV(b, c, v) SET_CONTEXT_FIELD(b, c, FSYNR1, APRIV, v)
+#define SET_APROTNS(b, c, v) SET_CONTEXT_FIELD(b, c, FSYNR1, APROTNS, v)
+#define SET_AINST(b, c, v) SET_CONTEXT_FIELD(b, c, FSYNR1, AINST, v)
+#define SET_AWRITE(b, c, v) SET_CONTEXT_FIELD(b, c, FSYNR1, AWRITE, v)
+#define SET_ABURST(b, c, v) SET_CONTEXT_FIELD(b, c, FSYNR1, ABURST, v)
+#define SET_ALEN(b, c, v) SET_CONTEXT_FIELD(b, c, FSYNR1, ALEN, v)
+#define SET_FSYNR1_ASIZE(b, c, v) \
+ SET_CONTEXT_FIELD(b, c, FSYNR1, FSYNR1_ASIZE, v)
+#define SET_ALOCK(b, c, v) SET_CONTEXT_FIELD(b, c, FSYNR1, ALOCK, v)
+#define SET_AFULL(b, c, v) SET_CONTEXT_FIELD(b, c, FSYNR1, AFULL, v)
+
+
+/* NMRR */
+#define SET_ICPC0(b, c, v) SET_CONTEXT_FIELD(b, c, NMRR, ICPC0, v)
+#define SET_ICPC1(b, c, v) SET_CONTEXT_FIELD(b, c, NMRR, ICPC1, v)
+#define SET_ICPC2(b, c, v) SET_CONTEXT_FIELD(b, c, NMRR, ICPC2, v)
+#define SET_ICPC3(b, c, v) SET_CONTEXT_FIELD(b, c, NMRR, ICPC3, v)
+#define SET_ICPC4(b, c, v) SET_CONTEXT_FIELD(b, c, NMRR, ICPC4, v)
+#define SET_ICPC5(b, c, v) SET_CONTEXT_FIELD(b, c, NMRR, ICPC5, v)
+#define SET_ICPC6(b, c, v) SET_CONTEXT_FIELD(b, c, NMRR, ICPC6, v)
+#define SET_ICPC7(b, c, v) SET_CONTEXT_FIELD(b, c, NMRR, ICPC7, v)
+#define SET_OCPC0(b, c, v) SET_CONTEXT_FIELD(b, c, NMRR, OCPC0, v)
+#define SET_OCPC1(b, c, v) SET_CONTEXT_FIELD(b, c, NMRR, OCPC1, v)
+#define SET_OCPC2(b, c, v) SET_CONTEXT_FIELD(b, c, NMRR, OCPC2, v)
+#define SET_OCPC3(b, c, v) SET_CONTEXT_FIELD(b, c, NMRR, OCPC3, v)
+#define SET_OCPC4(b, c, v) SET_CONTEXT_FIELD(b, c, NMRR, OCPC4, v)
+#define SET_OCPC5(b, c, v) SET_CONTEXT_FIELD(b, c, NMRR, OCPC5, v)
+#define SET_OCPC6(b, c, v) SET_CONTEXT_FIELD(b, c, NMRR, OCPC6, v)
+#define SET_OCPC7(b, c, v) SET_CONTEXT_FIELD(b, c, NMRR, OCPC7, v)
+
+
+/* PAR */
+#define SET_FAULT(b, c, v) SET_CONTEXT_FIELD(b, c, PAR, FAULT, v)
+
+#define SET_FAULT_TF(b, c, v) SET_CONTEXT_FIELD(b, c, PAR, FAULT_TF, v)
+#define SET_FAULT_AFF(b, c, v) SET_CONTEXT_FIELD(b, c, PAR, FAULT_AFF, v)
+#define SET_FAULT_APF(b, c, v) SET_CONTEXT_FIELD(b, c, PAR, FAULT_APF, v)
+#define SET_FAULT_TLBMF(b, c, v) SET_CONTEXT_FIELD(b, c, PAR, FAULT_TLBMF, v)
+#define SET_FAULT_HTWDEEF(b, c, v) \
+ SET_CONTEXT_FIELD(b, c, PAR, FAULT_HTWDEEF, v)
+#define SET_FAULT_HTWSEEF(b, c, v) \
+ SET_CONTEXT_FIELD(b, c, PAR, FAULT_HTWSEEF, v)
+#define SET_FAULT_MHF(b, c, v) SET_CONTEXT_FIELD(b, c, PAR, FAULT_MHF, v)
+#define SET_FAULT_SL(b, c, v) SET_CONTEXT_FIELD(b, c, PAR, FAULT_SL, v)
+#define SET_FAULT_SS(b, c, v) SET_CONTEXT_FIELD(b, c, PAR, FAULT_SS, v)
+
+#define SET_NOFAULT_SS(b, c, v) SET_CONTEXT_FIELD(b, c, PAR, NOFAULT_SS, v)
+#define SET_NOFAULT_MT(b, c, v) SET_CONTEXT_FIELD(b, c, PAR, NOFAULT_MT, v)
+#define SET_NOFAULT_SH(b, c, v) SET_CONTEXT_FIELD(b, c, PAR, NOFAULT_SH, v)
+#define SET_NOFAULT_NS(b, c, v) SET_CONTEXT_FIELD(b, c, PAR, NOFAULT_NS, v)
+#define SET_NOFAULT_NOS(b, c, v) SET_CONTEXT_FIELD(b, c, PAR, NOFAULT_NOS, v)
+#define SET_NPFAULT_PA(b, c, v) SET_CONTEXT_FIELD(b, c, PAR, NPFAULT_PA, v)
+
+
+/* PRRR */
+#define SET_MTC0(b, c, v) SET_CONTEXT_FIELD(b, c, PRRR, MTC0, v)
+#define SET_MTC1(b, c, v) SET_CONTEXT_FIELD(b, c, PRRR, MTC1, v)
+#define SET_MTC2(b, c, v) SET_CONTEXT_FIELD(b, c, PRRR, MTC2, v)
+#define SET_MTC3(b, c, v) SET_CONTEXT_FIELD(b, c, PRRR, MTC3, v)
+#define SET_MTC4(b, c, v) SET_CONTEXT_FIELD(b, c, PRRR, MTC4, v)
+#define SET_MTC5(b, c, v) SET_CONTEXT_FIELD(b, c, PRRR, MTC5, v)
+#define SET_MTC6(b, c, v) SET_CONTEXT_FIELD(b, c, PRRR, MTC6, v)
+#define SET_MTC7(b, c, v) SET_CONTEXT_FIELD(b, c, PRRR, MTC7, v)
+#define SET_SHDSH0(b, c, v) SET_CONTEXT_FIELD(b, c, PRRR, SHDSH0, v)
+#define SET_SHDSH1(b, c, v) SET_CONTEXT_FIELD(b, c, PRRR, SHDSH1, v)
+#define SET_SHNMSH0(b, c, v) SET_CONTEXT_FIELD(b, c, PRRR, SHNMSH0, v)
+#define SET_SHNMSH1(b, c, v) SET_CONTEXT_FIELD(b, c, PRRR, SHNMSH1, v)
+#define SET_NOS0(b, c, v) SET_CONTEXT_FIELD(b, c, PRRR, NOS0, v)
+#define SET_NOS1(b, c, v) SET_CONTEXT_FIELD(b, c, PRRR, NOS1, v)
+#define SET_NOS2(b, c, v) SET_CONTEXT_FIELD(b, c, PRRR, NOS2, v)
+#define SET_NOS3(b, c, v) SET_CONTEXT_FIELD(b, c, PRRR, NOS3, v)
+#define SET_NOS4(b, c, v) SET_CONTEXT_FIELD(b, c, PRRR, NOS4, v)
+#define SET_NOS5(b, c, v) SET_CONTEXT_FIELD(b, c, PRRR, NOS5, v)
+#define SET_NOS6(b, c, v) SET_CONTEXT_FIELD(b, c, PRRR, NOS6, v)
+#define SET_NOS7(b, c, v) SET_CONTEXT_FIELD(b, c, PRRR, NOS7, v)
+
+
+/* RESUME */
+#define SET_TNR(b, c, v) SET_CONTEXT_FIELD(b, c, RESUME, TNR, v)
+
+
+/* SCTLR */
+#define SET_M(b, c, v) SET_CONTEXT_FIELD(b, c, SCTLR, M, v)
+#define SET_TRE(b, c, v) SET_CONTEXT_FIELD(b, c, SCTLR, TRE, v)
+#define SET_AFE(b, c, v) SET_CONTEXT_FIELD(b, c, SCTLR, AFE, v)
+#define SET_HAF(b, c, v) SET_CONTEXT_FIELD(b, c, SCTLR, HAF, v)
+#define SET_BE(b, c, v) SET_CONTEXT_FIELD(b, c, SCTLR, BE, v)
+#define SET_AFFD(b, c, v) SET_CONTEXT_FIELD(b, c, SCTLR, AFFD, v)
+
+
+/* TLBLKCR */
+#define SET_LKE(b, c, v) SET_CONTEXT_FIELD(b, c, TLBLKCR, LKE, v)
+#define SET_TLBLKCR_TLBIALLCFG(b, c, v) \
+ SET_CONTEXT_FIELD(b, c, TLBLKCR, TLBLCKR_TLBIALLCFG, v)
+#define SET_TLBIASIDCFG(b, c, v) \
+ SET_CONTEXT_FIELD(b, c, TLBLKCR, TLBIASIDCFG, v)
+#define SET_TLBIVAACFG(b, c, v) SET_CONTEXT_FIELD(b, c, TLBLKCR, TLBIVAACFG, v)
+#define SET_FLOOR(b, c, v) SET_CONTEXT_FIELD(b, c, TLBLKCR, FLOOR, v)
+#define SET_VICTIM(b, c, v) SET_CONTEXT_FIELD(b, c, TLBLKCR, VICTIM, v)
+
+
+/* TTBCR */
+#define SET_N(b, c, v) SET_CONTEXT_FIELD(b, c, TTBCR, N, v)
+#define SET_PD0(b, c, v) SET_CONTEXT_FIELD(b, c, TTBCR, PD0, v)
+#define SET_PD1(b, c, v) SET_CONTEXT_FIELD(b, c, TTBCR, PD1, v)
+
+
+/* TTBR0 */
+#define SET_TTBR0_IRGNH(b, c, v) SET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_IRGNH, v)
+#define SET_TTBR0_SH(b, c, v) SET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_SH, v)
+#define SET_TTBR0_ORGN(b, c, v) SET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_ORGN, v)
+#define SET_TTBR0_NOS(b, c, v) SET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_NOS, v)
+#define SET_TTBR0_IRGNL(b, c, v) SET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_IRGNL, v)
+#define SET_TTBR0_PA(b, c, v) SET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_PA, v)
+
+
+/* TTBR1 */
+#define SET_TTBR1_IRGNH(b, c, v) SET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_IRGNH, v)
+#define SET_TTBR1_SH(b, c, v) SET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_SH, v)
+#define SET_TTBR1_ORGN(b, c, v) SET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_ORGN, v)
+#define SET_TTBR1_NOS(b, c, v) SET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_NOS, v)
+#define SET_TTBR1_IRGNL(b, c, v) SET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_IRGNL, v)
+#define SET_TTBR1_PA(b, c, v) SET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_PA, v)
+
+
+/* V2PSR */
+#define SET_HIT(b, c, v) SET_CONTEXT_FIELD(b, c, V2PSR, HIT, v)
+#define SET_INDEX(b, c, v) SET_CONTEXT_FIELD(b, c, V2PSR, INDEX, v)
+
+
+/* V2Pxx UW UR PW PR */
+#define SET_V2PUW_INDEX(b, c, v) SET_CONTEXT_FIELD(b, c, V2PUW, V2Pxx_INDEX, v)
+#define SET_V2PUW_VA(b, c, v) SET_CONTEXT_FIELD(b, c, V2PUW, V2Pxx_VA, v)
+
+#define SET_V2PUR_INDEX(b, c, v) SET_CONTEXT_FIELD(b, c, V2PUR, V2Pxx_INDEX, v)
+#define SET_V2PUR_VA(b, c, v) SET_CONTEXT_FIELD(b, c, V2PUR, V2Pxx_VA, v)
+
+#define SET_V2PPW_INDEX(b, c, v) SET_CONTEXT_FIELD(b, c, V2PPW, V2Pxx_INDEX, v)
+#define SET_V2PPW_VA(b, c, v) SET_CONTEXT_FIELD(b, c, V2PPW, V2Pxx_VA, v)
+
+#define SET_V2PPR_INDEX(b, c, v) SET_CONTEXT_FIELD(b, c, V2PPR, V2Pxx_INDEX, v)
+#define SET_V2PPR_VA(b, c, v) SET_CONTEXT_FIELD(b, c, V2PPR, V2Pxx_VA, v)
+
+
+/* Context Register getters */
+/* ACTLR */
+#define GET_CFERE(b, c) GET_CONTEXT_FIELD(b, c, ACTLR, CFERE)
+#define GET_CFEIE(b, c) GET_CONTEXT_FIELD(b, c, ACTLR, CFEIE)
+#define GET_PTSHCFG(b, c) GET_CONTEXT_FIELD(b, c, ACTLR, PTSHCFG)
+#define GET_RCOSH(b, c) GET_CONTEXT_FIELD(b, c, ACTLR, RCOSH)
+#define GET_RCISH(b, c) GET_CONTEXT_FIELD(b, c, ACTLR, RCISH)
+#define GET_RCNSH(b, c) GET_CONTEXT_FIELD(b, c, ACTLR, RCNSH)
+#define GET_PRIVCFG(b, c) GET_CONTEXT_FIELD(b, c, ACTLR, PRIVCFG)
+#define GET_DNA(b, c) GET_CONTEXT_FIELD(b, c, ACTLR, DNA)
+#define GET_DNLV2PA(b, c) GET_CONTEXT_FIELD(b, c, ACTLR, DNLV2PA)
+#define GET_TLBMCFG(b, c) GET_CONTEXT_FIELD(b, c, ACTLR, TLBMCFG)
+#define GET_CFCFG(b, c) GET_CONTEXT_FIELD(b, c, ACTLR, CFCFG)
+#define GET_TIPCF(b, c) GET_CONTEXT_FIELD(b, c, ACTLR, TIPCF)
+#define GET_V2PCFG(b, c) GET_CONTEXT_FIELD(b, c, ACTLR, V2PCFG)
+#define GET_HUME(b, c) GET_CONTEXT_FIELD(b, c, ACTLR, HUME)
+#define GET_PTMTCFG(b, c) GET_CONTEXT_FIELD(b, c, ACTLR, PTMTCFG)
+#define GET_PTMEMTYPE(b, c) GET_CONTEXT_FIELD(b, c, ACTLR, PTMEMTYPE)
+
+/* BFBCR */
+#define GET_BFBDFE(b, c) GET_CONTEXT_FIELD(b, c, BFBCR, BFBDFE)
+#define GET_BFBSFE(b, c) GET_CONTEXT_FIELD(b, c, BFBCR, BFBSFE)
+#define GET_SFVS(b, c) GET_CONTEXT_FIELD(b, c, BFBCR, SFVS)
+#define GET_FLVIC(b, c) GET_CONTEXT_FIELD(b, c, BFBCR, FLVIC)
+#define GET_SLVIC(b, c) GET_CONTEXT_FIELD(b, c, BFBCR, SLVIC)
+
+
+/* CONTEXTIDR */
+#define GET_CONTEXTIDR_ASID(b, c) \
+ GET_CONTEXT_FIELD(b, c, CONTEXTIDR, CONTEXTIDR_ASID)
+#define GET_CONTEXTIDR_PROCID(b, c) GET_CONTEXT_FIELD(b, c, CONTEXTIDR, PROCID)
+
+
+/* FSR */
+#define GET_TF(b, c) GET_CONTEXT_FIELD(b, c, FSR, TF)
+#define GET_AFF(b, c) GET_CONTEXT_FIELD(b, c, FSR, AFF)
+#define GET_APF(b, c) GET_CONTEXT_FIELD(b, c, FSR, APF)
+#define GET_TLBMF(b, c) GET_CONTEXT_FIELD(b, c, FSR, TLBMF)
+#define GET_HTWDEEF(b, c) GET_CONTEXT_FIELD(b, c, FSR, HTWDEEF)
+#define GET_HTWSEEF(b, c) GET_CONTEXT_FIELD(b, c, FSR, HTWSEEF)
+#define GET_MHF(b, c) GET_CONTEXT_FIELD(b, c, FSR, MHF)
+#define GET_SL(b, c) GET_CONTEXT_FIELD(b, c, FSR, SL)
+#define GET_SS(b, c) GET_CONTEXT_FIELD(b, c, FSR, SS)
+#define GET_MULTI(b, c) GET_CONTEXT_FIELD(b, c, FSR, MULTI)
+
+
+/* FSYNR0 */
+#define GET_AMID(b, c) GET_CONTEXT_FIELD(b, c, FSYNR0, AMID)
+#define GET_APID(b, c) GET_CONTEXT_FIELD(b, c, FSYNR0, APID)
+#define GET_ABID(b, c) GET_CONTEXT_FIELD(b, c, FSYNR0, ABID)
+#define GET_ATID(b, c) GET_CONTEXT_FIELD(b, c, FSYNR0, ATID)
+
+
+/* FSYNR1 */
+#define GET_AMEMTYPE(b, c) GET_CONTEXT_FIELD(b, c, FSYNR1, AMEMTYPE)
+#define GET_ASHARED(b, c) GET_CONTEXT_FIELD(b, c, FSYNR1, ASHARED)
+#define GET_AINNERSHARED(b, c) GET_CONTEXT_FIELD(b, c, FSYNR1, AINNERSHARED)
+#define GET_APRIV(b, c) GET_CONTEXT_FIELD(b, c, FSYNR1, APRIV)
+#define GET_APROTNS(b, c) GET_CONTEXT_FIELD(b, c, FSYNR1, APROTNS)
+#define GET_AINST(b, c) GET_CONTEXT_FIELD(b, c, FSYNR1, AINST)
+#define GET_AWRITE(b, c) GET_CONTEXT_FIELD(b, c, FSYNR1, AWRITE)
+#define GET_ABURST(b, c) GET_CONTEXT_FIELD(b, c, FSYNR1, ABURST)
+#define GET_ALEN(b, c) GET_CONTEXT_FIELD(b, c, FSYNR1, ALEN)
+#define GET_FSYNR1_ASIZE(b, c) GET_CONTEXT_FIELD(b, c, FSYNR1, FSYNR1_ASIZE)
+#define GET_ALOCK(b, c) GET_CONTEXT_FIELD(b, c, FSYNR1, ALOCK)
+#define GET_AFULL(b, c) GET_CONTEXT_FIELD(b, c, FSYNR1, AFULL)
+
+
+/* NMRR */
+#define GET_ICPC0(b, c) GET_CONTEXT_FIELD(b, c, NMRR, ICPC0)
+#define GET_ICPC1(b, c) GET_CONTEXT_FIELD(b, c, NMRR, ICPC1)
+#define GET_ICPC2(b, c) GET_CONTEXT_FIELD(b, c, NMRR, ICPC2)
+#define GET_ICPC3(b, c) GET_CONTEXT_FIELD(b, c, NMRR, ICPC3)
+#define GET_ICPC4(b, c) GET_CONTEXT_FIELD(b, c, NMRR, ICPC4)
+#define GET_ICPC5(b, c) GET_CONTEXT_FIELD(b, c, NMRR, ICPC5)
+#define GET_ICPC6(b, c) GET_CONTEXT_FIELD(b, c, NMRR, ICPC6)
+#define GET_ICPC7(b, c) GET_CONTEXT_FIELD(b, c, NMRR, ICPC7)
+#define GET_OCPC0(b, c) GET_CONTEXT_FIELD(b, c, NMRR, OCPC0)
+#define GET_OCPC1(b, c) GET_CONTEXT_FIELD(b, c, NMRR, OCPC1)
+#define GET_OCPC2(b, c) GET_CONTEXT_FIELD(b, c, NMRR, OCPC2)
+#define GET_OCPC3(b, c) GET_CONTEXT_FIELD(b, c, NMRR, OCPC3)
+#define GET_OCPC4(b, c) GET_CONTEXT_FIELD(b, c, NMRR, OCPC4)
+#define GET_OCPC5(b, c) GET_CONTEXT_FIELD(b, c, NMRR, OCPC5)
+#define GET_OCPC6(b, c) GET_CONTEXT_FIELD(b, c, NMRR, OCPC6)
+#define GET_OCPC7(b, c) GET_CONTEXT_FIELD(b, c, NMRR, OCPC7)
+
+
+/* PAR */
+#define GET_FAULT(b, c) GET_CONTEXT_FIELD(b, c, PAR, FAULT)
+
+#define GET_FAULT_TF(b, c) GET_CONTEXT_FIELD(b, c, PAR, FAULT_TF)
+#define GET_FAULT_AFF(b, c) GET_CONTEXT_FIELD(b, c, PAR, FAULT_AFF)
+#define GET_FAULT_APF(b, c) GET_CONTEXT_FIELD(b, c, PAR, FAULT_APF)
+#define GET_FAULT_TLBMF(b, c) GET_CONTEXT_FIELD(b, c, PAR, FAULT_TLBMF)
+#define GET_FAULT_HTWDEEF(b, c) GET_CONTEXT_FIELD(b, c, PAR, FAULT_HTWDEEF)
+#define GET_FAULT_HTWSEEF(b, c) GET_CONTEXT_FIELD(b, c, PAR, FAULT_HTWSEEF)
+#define GET_FAULT_MHF(b, c) GET_CONTEXT_FIELD(b, c, PAR, FAULT_MHF)
+#define GET_FAULT_SL(b, c) GET_CONTEXT_FIELD(b, c, PAR, FAULT_SL)
+#define GET_FAULT_SS(b, c) GET_CONTEXT_FIELD(b, c, PAR, FAULT_SS)
+
+#define GET_NOFAULT_SS(b, c) GET_CONTEXT_FIELD(b, c, PAR, PAR_NOFAULT_SS)
+#define GET_NOFAULT_MT(b, c) GET_CONTEXT_FIELD(b, c, PAR, PAR_NOFAULT_MT)
+#define GET_NOFAULT_SH(b, c) GET_CONTEXT_FIELD(b, c, PAR, PAR_NOFAULT_SH)
+#define GET_NOFAULT_NS(b, c) GET_CONTEXT_FIELD(b, c, PAR, PAR_NOFAULT_NS)
+#define GET_NOFAULT_NOS(b, c) GET_CONTEXT_FIELD(b, c, PAR, PAR_NOFAULT_NOS)
+#define GET_NPFAULT_PA(b, c) GET_CONTEXT_FIELD(b, c, PAR, PAR_NPFAULT_PA)
+
+
+/* PRRR */
+#define GET_MTC0(b, c) GET_CONTEXT_FIELD(b, c, PRRR, MTC0)
+#define GET_MTC1(b, c) GET_CONTEXT_FIELD(b, c, PRRR, MTC1)
+#define GET_MTC2(b, c) GET_CONTEXT_FIELD(b, c, PRRR, MTC2)
+#define GET_MTC3(b, c) GET_CONTEXT_FIELD(b, c, PRRR, MTC3)
+#define GET_MTC4(b, c) GET_CONTEXT_FIELD(b, c, PRRR, MTC4)
+#define GET_MTC5(b, c) GET_CONTEXT_FIELD(b, c, PRRR, MTC5)
+#define GET_MTC6(b, c) GET_CONTEXT_FIELD(b, c, PRRR, MTC6)
+#define GET_MTC7(b, c) GET_CONTEXT_FIELD(b, c, PRRR, MTC7)
+#define GET_SHDSH0(b, c) GET_CONTEXT_FIELD(b, c, PRRR, SHDSH0)
+#define GET_SHDSH1(b, c) GET_CONTEXT_FIELD(b, c, PRRR, SHDSH1)
+#define GET_SHNMSH0(b, c) GET_CONTEXT_FIELD(b, c, PRRR, SHNMSH0)
+#define GET_SHNMSH1(b, c) GET_CONTEXT_FIELD(b, c, PRRR, SHNMSH1)
+#define GET_NOS0(b, c) GET_CONTEXT_FIELD(b, c, PRRR, NOS0)
+#define GET_NOS1(b, c) GET_CONTEXT_FIELD(b, c, PRRR, NOS1)
+#define GET_NOS2(b, c) GET_CONTEXT_FIELD(b, c, PRRR, NOS2)
+#define GET_NOS3(b, c) GET_CONTEXT_FIELD(b, c, PRRR, NOS3)
+#define GET_NOS4(b, c) GET_CONTEXT_FIELD(b, c, PRRR, NOS4)
+#define GET_NOS5(b, c) GET_CONTEXT_FIELD(b, c, PRRR, NOS5)
+#define GET_NOS6(b, c) GET_CONTEXT_FIELD(b, c, PRRR, NOS6)
+#define GET_NOS7(b, c) GET_CONTEXT_FIELD(b, c, PRRR, NOS7)
+
+
+/* RESUME */
+#define GET_TNR(b, c) GET_CONTEXT_FIELD(b, c, RESUME, TNR)
+
+
+/* SCTLR */
+#define GET_M(b, c) GET_CONTEXT_FIELD(b, c, SCTLR, M)
+#define GET_TRE(b, c) GET_CONTEXT_FIELD(b, c, SCTLR, TRE)
+#define GET_AFE(b, c) GET_CONTEXT_FIELD(b, c, SCTLR, AFE)
+#define GET_HAF(b, c) GET_CONTEXT_FIELD(b, c, SCTLR, HAF)
+#define GET_BE(b, c) GET_CONTEXT_FIELD(b, c, SCTLR, BE)
+#define GET_AFFD(b, c) GET_CONTEXT_FIELD(b, c, SCTLR, AFFD)
+
+
+/* TLBLKCR */
+#define GET_LKE(b, c) GET_CONTEXT_FIELD(b, c, TLBLKCR, LKE)
+#define GET_TLBLCKR_TLBIALLCFG(b, c) \
+ GET_CONTEXT_FIELD(b, c, TLBLKCR, TLBLCKR_TLBIALLCFG)
+#define GET_TLBIASIDCFG(b, c) GET_CONTEXT_FIELD(b, c, TLBLKCR, TLBIASIDCFG)
+#define GET_TLBIVAACFG(b, c) GET_CONTEXT_FIELD(b, c, TLBLKCR, TLBIVAACFG)
+#define GET_FLOOR(b, c) GET_CONTEXT_FIELD(b, c, TLBLKCR, FLOOR)
+#define GET_VICTIM(b, c) GET_CONTEXT_FIELD(b, c, TLBLKCR, VICTIM)
+
+
+/* TTBCR */
+#define GET_N(b, c) GET_CONTEXT_FIELD(b, c, TTBCR, N)
+#define GET_PD0(b, c) GET_CONTEXT_FIELD(b, c, TTBCR, PD0)
+#define GET_PD1(b, c) GET_CONTEXT_FIELD(b, c, TTBCR, PD1)
+
+
+/* TTBR0 */
+#define GET_TTBR0_IRGNH(b, c) GET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_IRGNH)
+#define GET_TTBR0_SH(b, c) GET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_SH)
+#define GET_TTBR0_ORGN(b, c) GET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_ORGN)
+#define GET_TTBR0_NOS(b, c) GET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_NOS)
+#define GET_TTBR0_IRGNL(b, c) GET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_IRGNL)
+#define GET_TTBR0_PA(b, c) GET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_PA)
+
+
+/* TTBR1 */
+#define GET_TTBR1_IRGNH(b, c) GET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_IRGNH)
+#define GET_TTBR1_SH(b, c) GET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_SH)
+#define GET_TTBR1_ORGN(b, c) GET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_ORGN)
+#define GET_TTBR1_NOS(b, c) GET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_NOS)
+#define GET_TTBR1_IRGNL(b, c) GET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_IRGNL)
+#define GET_TTBR1_PA(b, c) GET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_PA)
+
+
+/* V2PSR */
+#define GET_HIT(b, c) GET_CONTEXT_FIELD(b, c, V2PSR, HIT)
+#define GET_INDEX(b, c) GET_CONTEXT_FIELD(b, c, V2PSR, INDEX)
+
+
+/* V2Pxx UW UR PW PR */
+#define GET_V2PUW_INDEX(b, c) GET_CONTEXT_FIELD(b, c, V2PUW, V2Pxx_INDEX)
+#define GET_V2PUW_VA(b, c) GET_CONTEXT_FIELD(b, c, V2PUW, V2Pxx_VA)
+
+#define GET_V2PUR_INDEX(b, c) GET_CONTEXT_FIELD(b, c, V2PUR, V2Pxx_INDEX)
+#define GET_V2PUR_VA(b, c) GET_CONTEXT_FIELD(b, c, V2PUR, V2Pxx_VA)
+
+#define GET_V2PPW_INDEX(b, c) GET_CONTEXT_FIELD(b, c, V2PPW, V2Pxx_INDEX)
+#define GET_V2PPW_VA(b, c) GET_CONTEXT_FIELD(b, c, V2PPW, V2Pxx_VA)
+
+#define GET_V2PPR_INDEX(b, c) GET_CONTEXT_FIELD(b, c, V2PPR, V2Pxx_INDEX)
+#define GET_V2PPR_VA(b, c) GET_CONTEXT_FIELD(b, c, V2PPR, V2Pxx_VA)
+
+
+/* Global Registers */
+#define M2VCBR_N (0xFF000)
+#define CBACR_N (0xFF800)
+#define TLBRSW (0xFFE00)
+#define TLBTR0 (0xFFE80)
+#define TLBTR1 (0xFFE84)
+#define TLBTR2 (0xFFE88)
+#define TESTBUSCR (0xFFE8C)
+#define GLOBAL_TLBIALL (0xFFF00)
+#define TLBIVMID (0xFFF04)
+#define CR (0xFFF80)
+#define EAR (0xFFF84)
+#define ESR (0xFFF88)
+#define ESRRESTORE (0xFFF8C)
+#define ESYNR0 (0xFFF90)
+#define ESYNR1 (0xFFF94)
+#define REV (0xFFFF4)
+#define IDR (0xFFFF8)
+#define RPU_ACR (0xFFFFC)
+
+
+/* Context Bank Registers */
+#define SCTLR (0x000)
+#define ACTLR (0x004)
+#define CONTEXTIDR (0x008)
+#define TTBR0 (0x010)
+#define TTBR1 (0x014)
+#define TTBCR (0x018)
+#define PAR (0x01C)
+#define FSR (0x020)
+#define FSRRESTORE (0x024)
+#define FAR (0x028)
+#define FSYNR0 (0x02C)
+#define FSYNR1 (0x030)
+#define PRRR (0x034)
+#define NMRR (0x038)
+#define TLBLCKR (0x03C)
+#define V2PSR (0x040)
+#define TLBFLPTER (0x044)
+#define TLBSLPTER (0x048)
+#define BFBCR (0x04C)
+#define CTX_TLBIALL (0x800)
+#define TLBIASID (0x804)
+#define TLBIVA (0x808)
+#define TLBIVAA (0x80C)
+#define V2PPR (0x810)
+#define V2PPW (0x814)
+#define V2PUR (0x818)
+#define V2PUW (0x81C)
+#define RESUME (0x820)
+
+
+/* Global Register Fields */
+/* CBACRn */
+#define RWVMID (RWVMID_MASK << RWVMID_SHIFT)
+#define RWE (RWE_MASK << RWE_SHIFT)
+#define RWGE (RWGE_MASK << RWGE_SHIFT)
+#define CBVMID (CBVMID_MASK << CBVMID_SHIFT)
+#define IRPTNDX (IRPTNDX_MASK << IRPTNDX_SHIFT)
+
+
+/* CR */
+#define RPUE (RPUE_MASK << RPUE_SHIFT)
+#define RPUERE (RPUERE_MASK << RPUERE_SHIFT)
+#define RPUEIE (RPUEIE_MASK << RPUEIE_SHIFT)
+#define DCDEE (DCDEE_MASK << DCDEE_SHIFT)
+#define CLIENTPD (CLIENTPD_MASK << CLIENTPD_SHIFT)
+#define STALLD (STALLD_MASK << STALLD_SHIFT)
+#define TLBLKCRWE (TLBLKCRWE_MASK << TLBLKCRWE_SHIFT)
+#define CR_TLBIALLCFG (CR_TLBIALLCFG_MASK << CR_TLBIALLCFG_SHIFT)
+#define TLBIVMIDCFG (TLBIVMIDCFG_MASK << TLBIVMIDCFG_SHIFT)
+#define CR_HUME (CR_HUME_MASK << CR_HUME_SHIFT)
+
+
+/* ESR */
+#define CFG (CFG_MASK << CFG_SHIFT)
+#define BYPASS (BYPASS_MASK << BYPASS_SHIFT)
+#define ESR_MULTI (ESR_MULTI_MASK << ESR_MULTI_SHIFT)
+
+
+/* ESYNR0 */
+#define ESYNR0_AMID (ESYNR0_AMID_MASK << ESYNR0_AMID_SHIFT)
+#define ESYNR0_APID (ESYNR0_APID_MASK << ESYNR0_APID_SHIFT)
+#define ESYNR0_ABID (ESYNR0_ABID_MASK << ESYNR0_ABID_SHIFT)
+#define ESYNR0_AVMID (ESYNR0_AVMID_MASK << ESYNR0_AVMID_SHIFT)
+#define ESYNR0_ATID (ESYNR0_ATID_MASK << ESYNR0_ATID_SHIFT)
+
+
+/* ESYNR1 */
+#define ESYNR1_AMEMTYPE (ESYNR1_AMEMTYPE_MASK << ESYNR1_AMEMTYPE_SHIFT)
+#define ESYNR1_ASHARED (ESYNR1_ASHARED_MASK << ESYNR1_ASHARED_SHIFT)
+#define ESYNR1_AINNERSHARED (ESYNR1_AINNERSHARED_MASK<< \
+ ESYNR1_AINNERSHARED_SHIFT)
+#define ESYNR1_APRIV (ESYNR1_APRIV_MASK << ESYNR1_APRIV_SHIFT)
+#define ESYNR1_APROTNS (ESYNR1_APROTNS_MASK << ESYNR1_APROTNS_SHIFT)
+#define ESYNR1_AINST (ESYNR1_AINST_MASK << ESYNR1_AINST_SHIFT)
+#define ESYNR1_AWRITE (ESYNR1_AWRITE_MASK << ESYNR1_AWRITE_SHIFT)
+#define ESYNR1_ABURST (ESYNR1_ABURST_MASK << ESYNR1_ABURST_SHIFT)
+#define ESYNR1_ALEN (ESYNR1_ALEN_MASK << ESYNR1_ALEN_SHIFT)
+#define ESYNR1_ASIZE (ESYNR1_ASIZE_MASK << ESYNR1_ASIZE_SHIFT)
+#define ESYNR1_ALOCK (ESYNR1_ALOCK_MASK << ESYNR1_ALOCK_SHIFT)
+#define ESYNR1_AOOO (ESYNR1_AOOO_MASK << ESYNR1_AOOO_SHIFT)
+#define ESYNR1_AFULL (ESYNR1_AFULL_MASK << ESYNR1_AFULL_SHIFT)
+#define ESYNR1_AC (ESYNR1_AC_MASK << ESYNR1_AC_SHIFT)
+#define ESYNR1_DCD (ESYNR1_DCD_MASK << ESYNR1_DCD_SHIFT)
+
+
+/* IDR */
+#define NM2VCBMT (NM2VCBMT_MASK << NM2VCBMT_SHIFT)
+#define HTW (HTW_MASK << HTW_SHIFT)
+#define HUM (HUM_MASK << HUM_SHIFT)
+#define TLBSIZE (TLBSIZE_MASK << TLBSIZE_SHIFT)
+#define NCB (NCB_MASK << NCB_SHIFT)
+#define NIRPT (NIRPT_MASK << NIRPT_SHIFT)
+
+
+/* M2VCBRn */
+#define VMID (VMID_MASK << VMID_SHIFT)
+#define CBNDX (CBNDX_MASK << CBNDX_SHIFT)
+#define BYPASSD (BYPASSD_MASK << BYPASSD_SHIFT)
+#define BPRCOSH (BPRCOSH_MASK << BPRCOSH_SHIFT)
+#define BPRCISH (BPRCISH_MASK << BPRCISH_SHIFT)
+#define BPRCNSH (BPRCNSH_MASK << BPRCNSH_SHIFT)
+#define BPSHCFG (BPSHCFG_MASK << BPSHCFG_SHIFT)
+#define NSCFG (NSCFG_MASK << NSCFG_SHIFT)
+#define BPMTCFG (BPMTCFG_MASK << BPMTCFG_SHIFT)
+#define BPMEMTYPE (BPMEMTYPE_MASK << BPMEMTYPE_SHIFT)
+
+
+/* REV */
+#define IDR_MINOR (MINOR_MASK << MINOR_SHIFT)
+#define IDR_MAJOR (MAJOR_MASK << MAJOR_SHIFT)
+
+
+/* TESTBUSCR */
+#define TBE (TBE_MASK << TBE_SHIFT)
+#define SPDMBE (SPDMBE_MASK << SPDMBE_SHIFT)
+#define WGSEL (WGSEL_MASK << WGSEL_SHIFT)
+#define TBLSEL (TBLSEL_MASK << TBLSEL_SHIFT)
+#define TBHSEL (TBHSEL_MASK << TBHSEL_SHIFT)
+#define SPDM0SEL (SPDM0SEL_MASK << SPDM0SEL_SHIFT)
+#define SPDM1SEL (SPDM1SEL_MASK << SPDM1SEL_SHIFT)
+#define SPDM2SEL (SPDM2SEL_MASK << SPDM2SEL_SHIFT)
+#define SPDM3SEL (SPDM3SEL_MASK << SPDM3SEL_SHIFT)
+
+
+/* TLBIVMID */
+#define TLBIVMID_VMID (TLBIVMID_VMID_MASK << TLBIVMID_VMID_SHIFT)
+
+
+/* TLBRSW */
+#define TLBRSW_INDEX (TLBRSW_INDEX_MASK << TLBRSW_INDEX_SHIFT)
+#define TLBBFBS (TLBBFBS_MASK << TLBBFBS_SHIFT)
+
+
+/* TLBTR0 */
+#define PR (PR_MASK << PR_SHIFT)
+#define PW (PW_MASK << PW_SHIFT)
+#define UR (UR_MASK << UR_SHIFT)
+#define UW (UW_MASK << UW_SHIFT)
+#define XN (XN_MASK << XN_SHIFT)
+#define NSDESC (NSDESC_MASK << NSDESC_SHIFT)
+#define ISH (ISH_MASK << ISH_SHIFT)
+#define SH (SH_MASK << SH_SHIFT)
+#define MT (MT_MASK << MT_SHIFT)
+#define DPSIZR (DPSIZR_MASK << DPSIZR_SHIFT)
+#define DPSIZC (DPSIZC_MASK << DPSIZC_SHIFT)
+
+
+/* TLBTR1 */
+#define TLBTR1_VMID (TLBTR1_VMID_MASK << TLBTR1_VMID_SHIFT)
+#define TLBTR1_PA (TLBTR1_PA_MASK << TLBTR1_PA_SHIFT)
+
+
+/* TLBTR2 */
+#define TLBTR2_ASID (TLBTR2_ASID_MASK << TLBTR2_ASID_SHIFT)
+#define TLBTR2_V (TLBTR2_V_MASK << TLBTR2_V_SHIFT)
+#define TLBTR2_NSTID (TLBTR2_NSTID_MASK << TLBTR2_NSTID_SHIFT)
+#define TLBTR2_NV (TLBTR2_NV_MASK << TLBTR2_NV_SHIFT)
+#define TLBTR2_VA (TLBTR2_VA_MASK << TLBTR2_VA_SHIFT)
+
+
+/* Context Register Fields */
+/* ACTLR */
+#define CFERE (CFERE_MASK << CFERE_SHIFT)
+#define CFEIE (CFEIE_MASK << CFEIE_SHIFT)
+#define PTSHCFG (PTSHCFG_MASK << PTSHCFG_SHIFT)
+#define RCOSH (RCOSH_MASK << RCOSH_SHIFT)
+#define RCISH (RCISH_MASK << RCISH_SHIFT)
+#define RCNSH (RCNSH_MASK << RCNSH_SHIFT)
+#define PRIVCFG (PRIVCFG_MASK << PRIVCFG_SHIFT)
+#define DNA (DNA_MASK << DNA_SHIFT)
+#define DNLV2PA (DNLV2PA_MASK << DNLV2PA_SHIFT)
+#define TLBMCFG (TLBMCFG_MASK << TLBMCFG_SHIFT)
+#define CFCFG (CFCFG_MASK << CFCFG_SHIFT)
+#define TIPCF (TIPCF_MASK << TIPCF_SHIFT)
+#define V2PCFG (V2PCFG_MASK << V2PCFG_SHIFT)
+#define HUME (HUME_MASK << HUME_SHIFT)
+#define PTMTCFG (PTMTCFG_MASK << PTMTCFG_SHIFT)
+#define PTMEMTYPE (PTMEMTYPE_MASK << PTMEMTYPE_SHIFT)
+
+
+/* BFBCR */
+#define BFBDFE (BFBDFE_MASK << BFBDFE_SHIFT)
+#define BFBSFE (BFBSFE_MASK << BFBSFE_SHIFT)
+#define SFVS (SFVS_MASK << SFVS_SHIFT)
+#define FLVIC (FLVIC_MASK << FLVIC_SHIFT)
+#define SLVIC (SLVIC_MASK << SLVIC_SHIFT)
+
+
+/* CONTEXTIDR */
+#define CONTEXTIDR_ASID (CONTEXTIDR_ASID_MASK << CONTEXTIDR_ASID_SHIFT)
+#define PROCID (PROCID_MASK << PROCID_SHIFT)
+
+
+/* FSR */
+#define TF (TF_MASK << TF_SHIFT)
+#define AFF (AFF_MASK << AFF_SHIFT)
+#define APF (APF_MASK << APF_SHIFT)
+#define TLBMF (TLBMF_MASK << TLBMF_SHIFT)
+#define HTWDEEF (HTWDEEF_MASK << HTWDEEF_SHIFT)
+#define HTWSEEF (HTWSEEF_MASK << HTWSEEF_SHIFT)
+#define MHF (MHF_MASK << MHF_SHIFT)
+#define SL (SL_MASK << SL_SHIFT)
+#define SS (SS_MASK << SS_SHIFT)
+#define MULTI (MULTI_MASK << MULTI_SHIFT)
+
+
+/* FSYNR0 */
+#define AMID (AMID_MASK << AMID_SHIFT)
+#define APID (APID_MASK << APID_SHIFT)
+#define ABID (ABID_MASK << ABID_SHIFT)
+#define ATID (ATID_MASK << ATID_SHIFT)
+
+
+/* FSYNR1 */
+#define AMEMTYPE (AMEMTYPE_MASK << AMEMTYPE_SHIFT)
+#define ASHARED (ASHARED_MASK << ASHARED_SHIFT)
+#define AINNERSHARED (AINNERSHARED_MASK << AINNERSHARED_SHIFT)
+#define APRIV (APRIV_MASK << APRIV_SHIFT)
+#define APROTNS (APROTNS_MASK << APROTNS_SHIFT)
+#define AINST (AINST_MASK << AINST_SHIFT)
+#define AWRITE (AWRITE_MASK << AWRITE_SHIFT)
+#define ABURST (ABURST_MASK << ABURST_SHIFT)
+#define ALEN (ALEN_MASK << ALEN_SHIFT)
+#define FSYNR1_ASIZE (FSYNR1_ASIZE_MASK << FSYNR1_ASIZE_SHIFT)
+#define ALOCK (ALOCK_MASK << ALOCK_SHIFT)
+#define AFULL (AFULL_MASK << AFULL_SHIFT)
+
+
+/* NMRR */
+#define ICPC0 (ICPC0_MASK << ICPC0_SHIFT)
+#define ICPC1 (ICPC1_MASK << ICPC1_SHIFT)
+#define ICPC2 (ICPC2_MASK << ICPC2_SHIFT)
+#define ICPC3 (ICPC3_MASK << ICPC3_SHIFT)
+#define ICPC4 (ICPC4_MASK << ICPC4_SHIFT)
+#define ICPC5 (ICPC5_MASK << ICPC5_SHIFT)
+#define ICPC6 (ICPC6_MASK << ICPC6_SHIFT)
+#define ICPC7 (ICPC7_MASK << ICPC7_SHIFT)
+#define OCPC0 (OCPC0_MASK << OCPC0_SHIFT)
+#define OCPC1 (OCPC1_MASK << OCPC1_SHIFT)
+#define OCPC2 (OCPC2_MASK << OCPC2_SHIFT)
+#define OCPC3 (OCPC3_MASK << OCPC3_SHIFT)
+#define OCPC4 (OCPC4_MASK << OCPC4_SHIFT)
+#define OCPC5 (OCPC5_MASK << OCPC5_SHIFT)
+#define OCPC6 (OCPC6_MASK << OCPC6_SHIFT)
+#define OCPC7 (OCPC7_MASK << OCPC7_SHIFT)
+
+
+/* PAR */
+#define FAULT (FAULT_MASK << FAULT_SHIFT)
+/* If a fault is present, these are the
+same as the fault fields in the FAR */
+#define FAULT_TF (FAULT_TF_MASK << FAULT_TF_SHIFT)
+#define FAULT_AFF (FAULT_AFF_MASK << FAULT_AFF_SHIFT)
+#define FAULT_APF (FAULT_APF_MASK << FAULT_APF_SHIFT)
+#define FAULT_TLBMF (FAULT_TLBMF_MASK << FAULT_TLBMF_SHIFT)
+#define FAULT_HTWDEEF (FAULT_HTWDEEF_MASK << FAULT_HTWDEEF_SHIFT)
+#define FAULT_HTWSEEF (FAULT_HTWSEEF_MASK << FAULT_HTWSEEF_SHIFT)
+#define FAULT_MHF (FAULT_MHF_MASK << FAULT_MHF_SHIFT)
+#define FAULT_SL (FAULT_SL_MASK << FAULT_SL_SHIFT)
+#define FAULT_SS (FAULT_SS_MASK << FAULT_SS_SHIFT)
+
+/* If NO fault is present, the following fields are in effect */
+/* (FAULT remains as before) */
+#define PAR_NOFAULT_SS (PAR_NOFAULT_SS_MASK << PAR_NOFAULT_SS_SHIFT)
+#define PAR_NOFAULT_MT (PAR_NOFAULT_MT_MASK << PAR_NOFAULT_MT_SHIFT)
+#define PAR_NOFAULT_SH (PAR_NOFAULT_SH_MASK << PAR_NOFAULT_SH_SHIFT)
+#define PAR_NOFAULT_NS (PAR_NOFAULT_NS_MASK << PAR_NOFAULT_NS_SHIFT)
+#define PAR_NOFAULT_NOS (PAR_NOFAULT_NOS_MASK << PAR_NOFAULT_NOS_SHIFT)
+#define PAR_NPFAULT_PA (PAR_NPFAULT_PA_MASK << PAR_NPFAULT_PA_SHIFT)
+
+
+/* PRRR */
+#define MTC0 (MTC0_MASK << MTC0_SHIFT)
+#define MTC1 (MTC1_MASK << MTC1_SHIFT)
+#define MTC2 (MTC2_MASK << MTC2_SHIFT)
+#define MTC3 (MTC3_MASK << MTC3_SHIFT)
+#define MTC4 (MTC4_MASK << MTC4_SHIFT)
+#define MTC5 (MTC5_MASK << MTC5_SHIFT)
+#define MTC6 (MTC6_MASK << MTC6_SHIFT)
+#define MTC7 (MTC7_MASK << MTC7_SHIFT)
+#define SHDSH0 (SHDSH0_MASK << SHDSH0_SHIFT)
+#define SHDSH1 (SHDSH1_MASK << SHDSH1_SHIFT)
+#define SHNMSH0 (SHNMSH0_MASK << SHNMSH0_SHIFT)
+#define SHNMSH1 (SHNMSH1_MASK << SHNMSH1_SHIFT)
+#define NOS0 (NOS0_MASK << NOS0_SHIFT)
+#define NOS1 (NOS1_MASK << NOS1_SHIFT)
+#define NOS2 (NOS2_MASK << NOS2_SHIFT)
+#define NOS3 (NOS3_MASK << NOS3_SHIFT)
+#define NOS4 (NOS4_MASK << NOS4_SHIFT)
+#define NOS5 (NOS5_MASK << NOS5_SHIFT)
+#define NOS6 (NOS6_MASK << NOS6_SHIFT)
+#define NOS7 (NOS7_MASK << NOS7_SHIFT)
+
+
+/* RESUME */
+#define TNR (TNR_MASK << TNR_SHIFT)
+
+
+/* SCTLR */
+#define M (M_MASK << M_SHIFT)
+#define TRE (TRE_MASK << TRE_SHIFT)
+#define AFE (AFE_MASK << AFE_SHIFT)
+#define HAF (HAF_MASK << HAF_SHIFT)
+#define BE (BE_MASK << BE_SHIFT)
+#define AFFD (AFFD_MASK << AFFD_SHIFT)
+
+
+/* TLBIASID */
+#define TLBIASID_ASID (TLBIASID_ASID_MASK << TLBIASID_ASID_SHIFT)
+
+
+/* TLBIVA */
+#define TLBIVA_ASID (TLBIVA_ASID_MASK << TLBIVA_ASID_SHIFT)
+#define TLBIVA_VA (TLBIVA_VA_MASK << TLBIVA_VA_SHIFT)
+
+
+/* TLBIVAA */
+#define TLBIVAA_VA (TLBIVAA_VA_MASK << TLBIVAA_VA_SHIFT)
+
+
+/* TLBLCKR */
+#define LKE (LKE_MASK << LKE_SHIFT)
+#define TLBLCKR_TLBIALLCFG (TLBLCKR_TLBIALLCFG_MASK<<TLBLCKR_TLBIALLCFG_SHIFT)
+#define TLBIASIDCFG (TLBIASIDCFG_MASK << TLBIASIDCFG_SHIFT)
+#define TLBIVAACFG (TLBIVAACFG_MASK << TLBIVAACFG_SHIFT)
+#define FLOOR (FLOOR_MASK << FLOOR_SHIFT)
+#define VICTIM (VICTIM_MASK << VICTIM_SHIFT)
+
+
+/* TTBCR */
+#define N (N_MASK << N_SHIFT)
+#define PD0 (PD0_MASK << PD0_SHIFT)
+#define PD1 (PD1_MASK << PD1_SHIFT)
+
+
+/* TTBR0 */
+#define TTBR0_IRGNH (TTBR0_IRGNH_MASK << TTBR0_IRGNH_SHIFT)
+#define TTBR0_SH (TTBR0_SH_MASK << TTBR0_SH_SHIFT)
+#define TTBR0_ORGN (TTBR0_ORGN_MASK << TTBR0_ORGN_SHIFT)
+#define TTBR0_NOS (TTBR0_NOS_MASK << TTBR0_NOS_SHIFT)
+#define TTBR0_IRGNL (TTBR0_IRGNL_MASK << TTBR0_IRGNL_SHIFT)
+#define TTBR0_PA (TTBR0_PA_MASK << TTBR0_PA_SHIFT)
+
+
+/* TTBR1 */
+#define TTBR1_IRGNH (TTBR1_IRGNH_MASK << TTBR1_IRGNH_SHIFT)
+#define TTBR1_SH (TTBR1_SH_MASK << TTBR1_SH_SHIFT)
+#define TTBR1_ORGN (TTBR1_ORGN_MASK << TTBR1_ORGN_SHIFT)
+#define TTBR1_NOS (TTBR1_NOS_MASK << TTBR1_NOS_SHIFT)
+#define TTBR1_IRGNL (TTBR1_IRGNL_MASK << TTBR1_IRGNL_SHIFT)
+#define TTBR1_PA (TTBR1_PA_MASK << TTBR1_PA_SHIFT)
+
+
+/* V2PSR */
+#define HIT (HIT_MASK << HIT_SHIFT)
+#define INDEX (INDEX_MASK << INDEX_SHIFT)
+
+
+/* V2Pxx */
+#define V2Pxx_INDEX (V2Pxx_INDEX_MASK << V2Pxx_INDEX_SHIFT)
+#define V2Pxx_VA (V2Pxx_VA_MASK << V2Pxx_VA_SHIFT)
+
+
+/* Global Register Masks */
+/* CBACRn */
+#define RWVMID_MASK 0x1F
+#define RWE_MASK 0x01
+#define RWGE_MASK 0x01
+#define CBVMID_MASK 0x1F
+#define IRPTNDX_MASK 0xFF
+
+
+/* CR */
+#define RPUE_MASK 0x01
+#define RPUERE_MASK 0x01
+#define RPUEIE_MASK 0x01
+#define DCDEE_MASK 0x01
+#define CLIENTPD_MASK 0x01
+#define STALLD_MASK 0x01
+#define TLBLKCRWE_MASK 0x01
+#define CR_TLBIALLCFG_MASK 0x01
+#define TLBIVMIDCFG_MASK 0x01
+#define CR_HUME_MASK 0x01
+
+
+/* ESR */
+#define CFG_MASK 0x01
+#define BYPASS_MASK 0x01
+#define ESR_MULTI_MASK 0x01
+
+
+/* ESYNR0 */
+#define ESYNR0_AMID_MASK 0xFF
+#define ESYNR0_APID_MASK 0x1F
+#define ESYNR0_ABID_MASK 0x07
+#define ESYNR0_AVMID_MASK 0x1F
+#define ESYNR0_ATID_MASK 0xFF
+
+
+/* ESYNR1 */
+#define ESYNR1_AMEMTYPE_MASK 0x07
+#define ESYNR1_ASHARED_MASK 0x01
+#define ESYNR1_AINNERSHARED_MASK 0x01
+#define ESYNR1_APRIV_MASK 0x01
+#define ESYNR1_APROTNS_MASK 0x01
+#define ESYNR1_AINST_MASK 0x01
+#define ESYNR1_AWRITE_MASK 0x01
+#define ESYNR1_ABURST_MASK 0x01
+#define ESYNR1_ALEN_MASK 0x0F
+#define ESYNR1_ASIZE_MASK 0x01
+#define ESYNR1_ALOCK_MASK 0x03
+#define ESYNR1_AOOO_MASK 0x01
+#define ESYNR1_AFULL_MASK 0x01
+#define ESYNR1_AC_MASK 0x01
+#define ESYNR1_DCD_MASK 0x01
+
+
+/* IDR */
+#define NM2VCBMT_MASK 0x1FF
+#define HTW_MASK 0x01
+#define HUM_MASK 0x01
+#define TLBSIZE_MASK 0x0F
+#define NCB_MASK 0xFF
+#define NIRPT_MASK 0xFF
+
+
+/* M2VCBRn */
+#define VMID_MASK 0x1F
+#define CBNDX_MASK 0xFF
+#define BYPASSD_MASK 0x01
+#define BPRCOSH_MASK 0x01
+#define BPRCISH_MASK 0x01
+#define BPRCNSH_MASK 0x01
+#define BPSHCFG_MASK 0x03
+#define NSCFG_MASK 0x03
+#define BPMTCFG_MASK 0x01
+#define BPMEMTYPE_MASK 0x07
+
+
+/* REV */
+#define MINOR_MASK 0x0F
+#define MAJOR_MASK 0x0F
+
+
+/* TESTBUSCR */
+#define TBE_MASK 0x01
+#define SPDMBE_MASK 0x01
+#define WGSEL_MASK 0x03
+#define TBLSEL_MASK 0x03
+#define TBHSEL_MASK 0x03
+#define SPDM0SEL_MASK 0x0F
+#define SPDM1SEL_MASK 0x0F
+#define SPDM2SEL_MASK 0x0F
+#define SPDM3SEL_MASK 0x0F
+
+
+/* TLBIMID */
+#define TLBIVMID_VMID_MASK 0x1F
+
+
+/* TLBRSW */
+#define TLBRSW_INDEX_MASK 0xFF
+#define TLBBFBS_MASK 0x03
+
+
+/* TLBTR0 */
+#define PR_MASK 0x01
+#define PW_MASK 0x01
+#define UR_MASK 0x01
+#define UW_MASK 0x01
+#define XN_MASK 0x01
+#define NSDESC_MASK 0x01
+#define ISH_MASK 0x01
+#define SH_MASK 0x01
+#define MT_MASK 0x07
+#define DPSIZR_MASK 0x07
+#define DPSIZC_MASK 0x07
+
+
+/* TLBTR1 */
+#define TLBTR1_VMID_MASK 0x1F
+#define TLBTR1_PA_MASK 0x000FFFFF
+
+
+/* TLBTR2 */
+#define TLBTR2_ASID_MASK 0xFF
+#define TLBTR2_V_MASK 0x01
+#define TLBTR2_NSTID_MASK 0x01
+#define TLBTR2_NV_MASK 0x01
+#define TLBTR2_VA_MASK 0x000FFFFF
+
+
+/* Global Register Shifts */
+/* CBACRn */
+#define RWVMID_SHIFT 0
+#define RWE_SHIFT 8
+#define RWGE_SHIFT 9
+#define CBVMID_SHIFT 16
+#define IRPTNDX_SHIFT 24
+
+
+/* CR */
+#define RPUE_SHIFT 0
+#define RPUERE_SHIFT 1
+#define RPUEIE_SHIFT 2
+#define DCDEE_SHIFT 3
+#define CLIENTPD_SHIFT 4
+#define STALLD_SHIFT 5
+#define TLBLKCRWE_SHIFT 6
+#define CR_TLBIALLCFG_SHIFT 7
+#define TLBIVMIDCFG_SHIFT 8
+#define CR_HUME_SHIFT 9
+
+
+/* ESR */
+#define CFG_SHIFT 0
+#define BYPASS_SHIFT 1
+#define ESR_MULTI_SHIFT 31
+
+
+/* ESYNR0 */
+#define ESYNR0_AMID_SHIFT 0
+#define ESYNR0_APID_SHIFT 8
+#define ESYNR0_ABID_SHIFT 13
+#define ESYNR0_AVMID_SHIFT 16
+#define ESYNR0_ATID_SHIFT 24
+
+
+/* ESYNR1 */
+#define ESYNR1_AMEMTYPE_SHIFT 0
+#define ESYNR1_ASHARED_SHIFT 3
+#define ESYNR1_AINNERSHARED_SHIFT 4
+#define ESYNR1_APRIV_SHIFT 5
+#define ESYNR1_APROTNS_SHIFT 6
+#define ESYNR1_AINST_SHIFT 7
+#define ESYNR1_AWRITE_SHIFT 8
+#define ESYNR1_ABURST_SHIFT 10
+#define ESYNR1_ALEN_SHIFT 12
+#define ESYNR1_ASIZE_SHIFT 16
+#define ESYNR1_ALOCK_SHIFT 20
+#define ESYNR1_AOOO_SHIFT 22
+#define ESYNR1_AFULL_SHIFT 24
+#define ESYNR1_AC_SHIFT 30
+#define ESYNR1_DCD_SHIFT 31
+
+
+/* IDR */
+#define NM2VCBMT_SHIFT 0
+#define HTW_SHIFT 9
+#define HUM_SHIFT 10
+#define TLBSIZE_SHIFT 12
+#define NCB_SHIFT 16
+#define NIRPT_SHIFT 24
+
+
+/* M2VCBRn */
+#define VMID_SHIFT 0
+#define CBNDX_SHIFT 8
+#define BYPASSD_SHIFT 16
+#define BPRCOSH_SHIFT 17
+#define BPRCISH_SHIFT 18
+#define BPRCNSH_SHIFT 19
+#define BPSHCFG_SHIFT 20
+#define NSCFG_SHIFT 22
+#define BPMTCFG_SHIFT 24
+#define BPMEMTYPE_SHIFT 25
+
+
+/* REV */
+#define MINOR_SHIFT 0
+#define MAJOR_SHIFT 4
+
+
+/* TESTBUSCR */
+#define TBE_SHIFT 0
+#define SPDMBE_SHIFT 1
+#define WGSEL_SHIFT 8
+#define TBLSEL_SHIFT 12
+#define TBHSEL_SHIFT 14
+#define SPDM0SEL_SHIFT 16
+#define SPDM1SEL_SHIFT 20
+#define SPDM2SEL_SHIFT 24
+#define SPDM3SEL_SHIFT 28
+
+
+/* TLBIMID */
+#define TLBIVMID_VMID_SHIFT 0
+
+
+/* TLBRSW */
+#define TLBRSW_INDEX_SHIFT 0
+#define TLBBFBS_SHIFT 8
+
+
+/* TLBTR0 */
+#define PR_SHIFT 0
+#define PW_SHIFT 1
+#define UR_SHIFT 2
+#define UW_SHIFT 3
+#define XN_SHIFT 4
+#define NSDESC_SHIFT 6
+#define ISH_SHIFT 7
+#define SH_SHIFT 8
+#define MT_SHIFT 9
+#define DPSIZR_SHIFT 16
+#define DPSIZC_SHIFT 20
+
+
+/* TLBTR1 */
+#define TLBTR1_VMID_SHIFT 0
+#define TLBTR1_PA_SHIFT 12
+
+
+/* TLBTR2 */
+#define TLBTR2_ASID_SHIFT 0
+#define TLBTR2_V_SHIFT 8
+#define TLBTR2_NSTID_SHIFT 9
+#define TLBTR2_NV_SHIFT 10
+#define TLBTR2_VA_SHIFT 12
+
+
+/* Context Register Masks */
+/* ACTLR */
+#define CFERE_MASK 0x01
+#define CFEIE_MASK 0x01
+#define PTSHCFG_MASK 0x03
+#define RCOSH_MASK 0x01
+#define RCISH_MASK 0x01
+#define RCNSH_MASK 0x01
+#define PRIVCFG_MASK 0x03
+#define DNA_MASK 0x01
+#define DNLV2PA_MASK 0x01
+#define TLBMCFG_MASK 0x03
+#define CFCFG_MASK 0x01
+#define TIPCF_MASK 0x01
+#define V2PCFG_MASK 0x03
+#define HUME_MASK 0x01
+#define PTMTCFG_MASK 0x01
+#define PTMEMTYPE_MASK 0x07
+
+
+/* BFBCR */
+#define BFBDFE_MASK 0x01
+#define BFBSFE_MASK 0x01
+#define SFVS_MASK 0x01
+#define FLVIC_MASK 0x0F
+#define SLVIC_MASK 0x0F
+
+
+/* CONTEXTIDR */
+#define CONTEXTIDR_ASID_MASK 0xFF
+#define PROCID_MASK 0x00FFFFFF
+
+
+/* FSR */
+#define TF_MASK 0x01
+#define AFF_MASK 0x01
+#define APF_MASK 0x01
+#define TLBMF_MASK 0x01
+#define HTWDEEF_MASK 0x01
+#define HTWSEEF_MASK 0x01
+#define MHF_MASK 0x01
+#define SL_MASK 0x01
+#define SS_MASK 0x01
+#define MULTI_MASK 0x01
+
+
+/* FSYNR0 */
+#define AMID_MASK 0xFF
+#define APID_MASK 0x1F
+#define ABID_MASK 0x07
+#define ATID_MASK 0xFF
+
+
+/* FSYNR1 */
+#define AMEMTYPE_MASK 0x07
+#define ASHARED_MASK 0x01
+#define AINNERSHARED_MASK 0x01
+#define APRIV_MASK 0x01
+#define APROTNS_MASK 0x01
+#define AINST_MASK 0x01
+#define AWRITE_MASK 0x01
+#define ABURST_MASK 0x01
+#define ALEN_MASK 0x0F
+#define FSYNR1_ASIZE_MASK 0x07
+#define ALOCK_MASK 0x03
+#define AFULL_MASK 0x01
+
+
+/* NMRR */
+#define ICPC0_MASK 0x03
+#define ICPC1_MASK 0x03
+#define ICPC2_MASK 0x03
+#define ICPC3_MASK 0x03
+#define ICPC4_MASK 0x03
+#define ICPC5_MASK 0x03
+#define ICPC6_MASK 0x03
+#define ICPC7_MASK 0x03
+#define OCPC0_MASK 0x03
+#define OCPC1_MASK 0x03
+#define OCPC2_MASK 0x03
+#define OCPC3_MASK 0x03
+#define OCPC4_MASK 0x03
+#define OCPC5_MASK 0x03
+#define OCPC6_MASK 0x03
+#define OCPC7_MASK 0x03
+
+
+/* PAR */
+#define FAULT_MASK 0x01
+/* If a fault is present, these are the
+same as the fault fields in the FAR */
+#define FAULT_TF_MASK 0x01
+#define FAULT_AFF_MASK 0x01
+#define FAULT_APF_MASK 0x01
+#define FAULT_TLBMF_MASK 0x01
+#define FAULT_HTWDEEF_MASK 0x01
+#define FAULT_HTWSEEF_MASK 0x01
+#define FAULT_MHF_MASK 0x01
+#define FAULT_SL_MASK 0x01
+#define FAULT_SS_MASK 0x01
+
+/* If NO fault is present, the following
+ * fields are in effect
+ * (FAULT remains as before) */
+#define PAR_NOFAULT_SS_MASK 0x01
+#define PAR_NOFAULT_MT_MASK 0x07
+#define PAR_NOFAULT_SH_MASK 0x01
+#define PAR_NOFAULT_NS_MASK 0x01
+#define PAR_NOFAULT_NOS_MASK 0x01
+#define PAR_NPFAULT_PA_MASK 0x000FFFFF
+
+
+/* PRRR */
+#define MTC0_MASK 0x03
+#define MTC1_MASK 0x03
+#define MTC2_MASK 0x03
+#define MTC3_MASK 0x03
+#define MTC4_MASK 0x03
+#define MTC5_MASK 0x03
+#define MTC6_MASK 0x03
+#define MTC7_MASK 0x03
+#define SHDSH0_MASK 0x01
+#define SHDSH1_MASK 0x01
+#define SHNMSH0_MASK 0x01
+#define SHNMSH1_MASK 0x01
+#define NOS0_MASK 0x01
+#define NOS1_MASK 0x01
+#define NOS2_MASK 0x01
+#define NOS3_MASK 0x01
+#define NOS4_MASK 0x01
+#define NOS5_MASK 0x01
+#define NOS6_MASK 0x01
+#define NOS7_MASK 0x01
+
+
+/* RESUME */
+#define TNR_MASK 0x01
+
+
+/* SCTLR */
+#define M_MASK 0x01
+#define TRE_MASK 0x01
+#define AFE_MASK 0x01
+#define HAF_MASK 0x01
+#define BE_MASK 0x01
+#define AFFD_MASK 0x01
+
+
+/* TLBIASID */
+#define TLBIASID_ASID_MASK 0xFF
+
+
+/* TLBIVA */
+#define TLBIVA_ASID_MASK 0xFF
+#define TLBIVA_VA_MASK 0x000FFFFF
+
+
+/* TLBIVAA */
+#define TLBIVAA_VA_MASK 0x000FFFFF
+
+
+/* TLBLCKR */
+#define LKE_MASK 0x01
+#define TLBLCKR_TLBIALLCFG_MASK 0x01
+#define TLBIASIDCFG_MASK 0x01
+#define TLBIVAACFG_MASK 0x01
+#define FLOOR_MASK 0xFF
+#define VICTIM_MASK 0xFF
+
+
+/* TTBCR */
+#define N_MASK 0x07
+#define PD0_MASK 0x01
+#define PD1_MASK 0x01
+
+
+/* TTBR0 */
+#define TTBR0_IRGNH_MASK 0x01
+#define TTBR0_SH_MASK 0x01
+#define TTBR0_ORGN_MASK 0x03
+#define TTBR0_NOS_MASK 0x01
+#define TTBR0_IRGNL_MASK 0x01
+#define TTBR0_PA_MASK 0x0003FFFF
+
+
+/* TTBR1 */
+#define TTBR1_IRGNH_MASK 0x01
+#define TTBR1_SH_MASK 0x01
+#define TTBR1_ORGN_MASK 0x03
+#define TTBR1_NOS_MASK 0x01
+#define TTBR1_IRGNL_MASK 0x01
+#define TTBR1_PA_MASK 0x0003FFFF
+
+
+/* V2PSR */
+#define HIT_MASK 0x01
+#define INDEX_MASK 0xFF
+
+
+/* V2Pxx */
+#define V2Pxx_INDEX_MASK 0xFF
+#define V2Pxx_VA_MASK 0x000FFFFF
+
+
+/* Context Register Shifts */
+/* ACTLR */
+#define CFERE_SHIFT 0
+#define CFEIE_SHIFT 1
+#define PTSHCFG_SHIFT 2
+#define RCOSH_SHIFT 4
+#define RCISH_SHIFT 5
+#define RCNSH_SHIFT 6
+#define PRIVCFG_SHIFT 8
+#define DNA_SHIFT 10
+#define DNLV2PA_SHIFT 11
+#define TLBMCFG_SHIFT 12
+#define CFCFG_SHIFT 14
+#define TIPCF_SHIFT 15
+#define V2PCFG_SHIFT 16
+#define HUME_SHIFT 18
+#define PTMTCFG_SHIFT 20
+#define PTMEMTYPE_SHIFT 21
+
+
+/* BFBCR */
+#define BFBDFE_SHIFT 0
+#define BFBSFE_SHIFT 1
+#define SFVS_SHIFT 2
+#define FLVIC_SHIFT 4
+#define SLVIC_SHIFT 8
+
+
+/* CONTEXTIDR */
+#define CONTEXTIDR_ASID_SHIFT 0
+#define PROCID_SHIFT 8
+
+
+/* FSR */
+#define TF_SHIFT 1
+#define AFF_SHIFT 2
+#define APF_SHIFT 3
+#define TLBMF_SHIFT 4
+#define HTWDEEF_SHIFT 5
+#define HTWSEEF_SHIFT 6
+#define MHF_SHIFT 7
+#define SL_SHIFT 16
+#define SS_SHIFT 30
+#define MULTI_SHIFT 31
+
+
+/* FSYNR0 */
+#define AMID_SHIFT 0
+#define APID_SHIFT 8
+#define ABID_SHIFT 13
+#define ATID_SHIFT 24
+
+
+/* FSYNR1 */
+#define AMEMTYPE_SHIFT 0
+#define ASHARED_SHIFT 3
+#define AINNERSHARED_SHIFT 4
+#define APRIV_SHIFT 5
+#define APROTNS_SHIFT 6
+#define AINST_SHIFT 7
+#define AWRITE_SHIFT 8
+#define ABURST_SHIFT 10
+#define ALEN_SHIFT 12
+#define FSYNR1_ASIZE_SHIFT 16
+#define ALOCK_SHIFT 20
+#define AFULL_SHIFT 24
+
+
+/* NMRR */
+#define ICPC0_SHIFT 0
+#define ICPC1_SHIFT 2
+#define ICPC2_SHIFT 4
+#define ICPC3_SHIFT 6
+#define ICPC4_SHIFT 8
+#define ICPC5_SHIFT 10
+#define ICPC6_SHIFT 12
+#define ICPC7_SHIFT 14
+#define OCPC0_SHIFT 16
+#define OCPC1_SHIFT 18
+#define OCPC2_SHIFT 20
+#define OCPC3_SHIFT 22
+#define OCPC4_SHIFT 24
+#define OCPC5_SHIFT 26
+#define OCPC6_SHIFT 28
+#define OCPC7_SHIFT 30
+
+
+/* PAR */
+#define FAULT_SHIFT 0
+/* If a fault is present, these are the
+same as the fault fields in the FAR */
+#define FAULT_TF_SHIFT 1
+#define FAULT_AFF_SHIFT 2
+#define FAULT_APF_SHIFT 3
+#define FAULT_TLBMF_SHIFT 4
+#define FAULT_HTWDEEF_SHIFT 5
+#define FAULT_HTWSEEF_SHIFT 6
+#define FAULT_MHF_SHIFT 7
+#define FAULT_SL_SHIFT 16
+#define FAULT_SS_SHIFT 30
+
+/* If NO fault is present, the following
+ * fields are in effect
+ * (FAULT remains as before) */
+#define PAR_NOFAULT_SS_SHIFT 1
+#define PAR_NOFAULT_MT_SHIFT 4
+#define PAR_NOFAULT_SH_SHIFT 7
+#define PAR_NOFAULT_NS_SHIFT 9
+#define PAR_NOFAULT_NOS_SHIFT 10
+#define PAR_NPFAULT_PA_SHIFT 12
+
+
+/* PRRR */
+#define MTC0_SHIFT 0
+#define MTC1_SHIFT 2
+#define MTC2_SHIFT 4
+#define MTC3_SHIFT 6
+#define MTC4_SHIFT 8
+#define MTC5_SHIFT 10
+#define MTC6_SHIFT 12
+#define MTC7_SHIFT 14
+#define SHDSH0_SHIFT 16
+#define SHDSH1_SHIFT 17
+#define SHNMSH0_SHIFT 18
+#define SHNMSH1_SHIFT 19
+#define NOS0_SHIFT 24
+#define NOS1_SHIFT 25
+#define NOS2_SHIFT 26
+#define NOS3_SHIFT 27
+#define NOS4_SHIFT 28
+#define NOS5_SHIFT 29
+#define NOS6_SHIFT 30
+#define NOS7_SHIFT 31
+
+
+/* RESUME */
+#define TNR_SHIFT 0
+
+
+/* SCTLR */
+#define M_SHIFT 0
+#define TRE_SHIFT 1
+#define AFE_SHIFT 2
+#define HAF_SHIFT 3
+#define BE_SHIFT 4
+#define AFFD_SHIFT 5
+
+
+/* TLBIASID */
+#define TLBIASID_ASID_SHIFT 0
+
+
+/* TLBIVA */
+#define TLBIVA_ASID_SHIFT 0
+#define TLBIVA_VA_SHIFT 12
+
+
+/* TLBIVAA */
+#define TLBIVAA_VA_SHIFT 12
+
+
+/* TLBLCKR */
+#define LKE_SHIFT 0
+#define TLBLCKR_TLBIALLCFG_SHIFT 1
+#define TLBIASIDCFG_SHIFT 2
+#define TLBIVAACFG_SHIFT 3
+#define FLOOR_SHIFT 8
+#define VICTIM_SHIFT 8
+
+
+/* TTBCR */
+#define N_SHIFT 3
+#define PD0_SHIFT 4
+#define PD1_SHIFT 5
+
+
+/* TTBR0 */
+#define TTBR0_IRGNH_SHIFT 0
+#define TTBR0_SH_SHIFT 1
+#define TTBR0_ORGN_SHIFT 3
+#define TTBR0_NOS_SHIFT 5
+#define TTBR0_IRGNL_SHIFT 6
+#define TTBR0_PA_SHIFT 14
+
+
+/* TTBR1 */
+#define TTBR1_IRGNH_SHIFT 0
+#define TTBR1_SH_SHIFT 1
+#define TTBR1_ORGN_SHIFT 3
+#define TTBR1_NOS_SHIFT 5
+#define TTBR1_IRGNL_SHIFT 6
+#define TTBR1_PA_SHIFT 14
+
+
+/* V2PSR */
+#define HIT_SHIFT 0
+#define INDEX_SHIFT 8
+
+
+/* V2Pxx */
+#define V2Pxx_INDEX_SHIFT 0
+#define V2Pxx_VA_SHIFT 12
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/irqs-8x60.h b/arch/arm/mach-msm/include/mach/irqs-8x60.h
new file mode 100644
index 0000000..36074cf
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/irqs-8x60.h
@@ -0,0 +1,253 @@
+/* Copyright (c) 2010 Code Aurora Forum. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_IRQS_8X60_H
+#define __ASM_ARCH_MSM_IRQS_8X60_H
+
+/* MSM ACPU Interrupt Numbers */
+
+/* 0-15: STI/SGI (software triggered/generated interrupts)
+ * 16-31: PPI (private peripheral interrupts)
+ * 32+: SPI (shared peripheral interrupts)
+ */
+
+#define GIC_PPI_START 16
+#define GIC_SPI_START 32
+
+#define INT_DEBUG_TIMER_EXP (GIC_PPI_START + 0)
+#define INT_GP_TIMER_EXP (GIC_PPI_START + 1)
+#define INT_GP_TIMER2_EXP (GIC_PPI_START + 2)
+#define WDT0_ACCSCSSNBARK_INT (GIC_PPI_START + 3)
+#define WDT1_ACCSCSSNBARK_INT (GIC_PPI_START + 4)
+#define AVS_SVICINT (GIC_PPI_START + 5)
+#define AVS_SVICINTSWDONE (GIC_PPI_START + 6)
+#define CPU_DBGCPUXCOMMRXFULL (GIC_PPI_START + 7)
+#define CPU_DBGCPUXCOMMTXEMPTY (GIC_PPI_START + 8)
+#define CPU_SICCPUXPERFMONIRPTREQ (GIC_PPI_START + 9)
+#define SC_AVSCPUXDOWN (GIC_PPI_START + 10)
+#define SC_AVSCPUXUP (GIC_PPI_START + 11)
+#define SC_SICCPUXACGIRPTREQ (GIC_PPI_START + 12)
+/* PPI 13 to 15 are unused */
+
+
+#define SC_SICMPUIRPTREQ (GIC_SPI_START + 0)
+#define SC_SICL2IRPTREQ (GIC_SPI_START + 1)
+#define SC_SICL2ACGIRPTREQ (GIC_SPI_START + 2)
+#define NC (GIC_SPI_START + 3)
+#define TLMM_SCSS_DIR_CONN_IRQ_0 (GIC_SPI_START + 4)
+#define TLMM_SCSS_DIR_CONN_IRQ_1 (GIC_SPI_START + 5)
+#define TLMM_SCSS_DIR_CONN_IRQ_2 (GIC_SPI_START + 6)
+#define TLMM_SCSS_DIR_CONN_IRQ_3 (GIC_SPI_START + 7)
+#define TLMM_SCSS_DIR_CONN_IRQ_4 (GIC_SPI_START + 8)
+#define TLMM_SCSS_DIR_CONN_IRQ_5 (GIC_SPI_START + 9)
+#define TLMM_SCSS_DIR_CONN_IRQ_6 (GIC_SPI_START + 10)
+#define TLMM_SCSS_DIR_CONN_IRQ_7 (GIC_SPI_START + 11)
+#define TLMM_SCSS_DIR_CONN_IRQ_8 (GIC_SPI_START + 12)
+#define TLMM_SCSS_DIR_CONN_IRQ_9 (GIC_SPI_START + 13)
+#define PM8058_SEC_IRQ_N (GIC_SPI_START + 14)
+#define PM8901_SEC_IRQ_N (GIC_SPI_START + 15)
+#define TLMM_SCSS_SUMMARY_IRQ (GIC_SPI_START + 16)
+#define SPDM_RT_1_IRQ (GIC_SPI_START + 17)
+#define SPDM_DIAG_IRQ (GIC_SPI_START + 18)
+#define RPM_SCSS_CPU0_GP_HIGH_IRQ (GIC_SPI_START + 19)
+#define RPM_SCSS_CPU0_GP_MEDIUM_IRQ (GIC_SPI_START + 20)
+#define RPM_SCSS_CPU0_GP_LOW_IRQ (GIC_SPI_START + 21)
+#define RPM_SCSS_CPU0_WAKE_UP_IRQ (GIC_SPI_START + 22)
+#define RPM_SCSS_CPU1_GP_HIGH_IRQ (GIC_SPI_START + 23)
+#define RPM_SCSS_CPU1_GP_MEDIUM_IRQ (GIC_SPI_START + 24)
+#define RPM_SCSS_CPU1_GP_LOW_IRQ (GIC_SPI_START + 25)
+#define RPM_SCSS_CPU1_WAKE_UP_IRQ (GIC_SPI_START + 26)
+#define SSBI2_2_SC_CPU0_SECURE_INT (GIC_SPI_START + 27)
+#define SSBI2_2_SC_CPU0_NON_SECURE_INT (GIC_SPI_START + 28)
+#define SSBI2_1_SC_CPU0_SECURE_INT (GIC_SPI_START + 29)
+#define SSBI2_1_SC_CPU0_NON_SECURE_INT (GIC_SPI_START + 30)
+#define MSMC_SC_SEC_CE_IRQ (GIC_SPI_START + 31)
+#define MSMC_SC_PRI_CE_IRQ (GIC_SPI_START + 32)
+#define MARM_FIQ (GIC_SPI_START + 33)
+#define MARM_IRQ (GIC_SPI_START + 34)
+#define MARM_L2CC_IRQ (GIC_SPI_START + 35)
+#define MARM_WDOG_EXPIRED (GIC_SPI_START + 36)
+#define MARM_SCSS_GP_IRQ_0 (GIC_SPI_START + 37)
+#define MARM_SCSS_GP_IRQ_1 (GIC_SPI_START + 38)
+#define MARM_SCSS_GP_IRQ_2 (GIC_SPI_START + 39)
+#define MARM_SCSS_GP_IRQ_3 (GIC_SPI_START + 40)
+#define MARM_SCSS_GP_IRQ_4 (GIC_SPI_START + 41)
+#define MARM_SCSS_GP_IRQ_5 (GIC_SPI_START + 42)
+#define MARM_SCSS_GP_IRQ_6 (GIC_SPI_START + 43)
+#define MARM_SCSS_GP_IRQ_7 (GIC_SPI_START + 44)
+#define MARM_SCSS_GP_IRQ_8 (GIC_SPI_START + 45)
+#define MARM_SCSS_GP_IRQ_9 (GIC_SPI_START + 46)
+#define VPE_IRQ (GIC_SPI_START + 47)
+#define VFE_IRQ (GIC_SPI_START + 48)
+#define VCODEC_IRQ (GIC_SPI_START + 49)
+#define TV_ENC_IRQ (GIC_SPI_START + 50)
+#define SMMU_VPE_CB_SC_SECURE_IRQ (GIC_SPI_START + 51)
+#define SMMU_VPE_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 52)
+#define SMMU_VFE_CB_SC_SECURE_IRQ (GIC_SPI_START + 53)
+#define SMMU_VFE_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 54)
+#define SMMU_VCODEC_B_CB_SC_SECURE_IRQ (GIC_SPI_START + 55)
+#define SMMU_VCODEC_B_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 56)
+#define SMMU_VCODEC_A_CB_SC_SECURE_IRQ (GIC_SPI_START + 57)
+#define SMMU_VCODEC_A_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 58)
+#define SMMU_ROT_CB_SC_SECURE_IRQ (GIC_SPI_START + 59)
+#define SMMU_ROT_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 60)
+#define SMMU_MDP1_CB_SC_SECURE_IRQ (GIC_SPI_START + 61)
+#define SMMU_MDP1_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 62)
+#define SMMU_MDP0_CB_SC_SECURE_IRQ (GIC_SPI_START + 63)
+#define SMMU_MDP0_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 64)
+#define SMMU_JPEGD_CB_SC_SECURE_IRQ (GIC_SPI_START + 65)
+#define SMMU_JPEGD_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 66)
+#define SMMU_IJPEG_CB_SC_SECURE_IRQ (GIC_SPI_START + 67)
+#define SMMU_IJPEG_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 68)
+#define SMMU_GFX3D_CB_SC_SECURE_IRQ (GIC_SPI_START + 69)
+#define SMMU_GFX3D_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 70)
+#define SMMU_GFX2D0_CB_SC_SECURE_IRQ (GIC_SPI_START + 71)
+#define SMMU_GFX2D0_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 72)
+#define ROT_IRQ (GIC_SPI_START + 73)
+#define MMSS_FABRIC_IRQ (GIC_SPI_START + 74)
+#define MDP_IRQ (GIC_SPI_START + 75)
+#define JPEGD_IRQ (GIC_SPI_START + 76)
+#define JPEG_IRQ (GIC_SPI_START + 77)
+#define MMSS_IMEM_IRQ (GIC_SPI_START + 78)
+#define HDMI_IRQ (GIC_SPI_START + 79)
+#define GFX3D_IRQ (GIC_SPI_START + 80)
+#define GFX2D0_IRQ (GIC_SPI_START + 81)
+#define DSI_IRQ (GIC_SPI_START + 82)
+#define CSI_1_IRQ (GIC_SPI_START + 83)
+#define CSI_0_IRQ (GIC_SPI_START + 84)
+#define LPASS_SCSS_AUDIO_IF_OUT0_IRQ (GIC_SPI_START + 85)
+#define LPASS_SCSS_MIDI_IRQ (GIC_SPI_START + 86)
+#define LPASS_Q6SS_WDOG_EXPIRED (GIC_SPI_START + 87)
+#define LPASS_SCSS_GP_LOW_IRQ (GIC_SPI_START + 88)
+#define LPASS_SCSS_GP_MEDIUM_IRQ (GIC_SPI_START + 89)
+#define LPASS_SCSS_GP_HIGH_IRQ (GIC_SPI_START + 90)
+#define TOP_IMEM_IRQ (GIC_SPI_START + 91)
+#define FABRIC_SYS_IRQ (GIC_SPI_START + 92)
+#define FABRIC_APPS_IRQ (GIC_SPI_START + 93)
+#define USB1_HS_BAM_IRQ (GIC_SPI_START + 94)
+#define SDC4_BAM_IRQ (GIC_SPI_START + 95)
+#define SDC3_BAM_IRQ (GIC_SPI_START + 96)
+#define SDC2_BAM_IRQ (GIC_SPI_START + 97)
+#define SDC1_BAM_IRQ (GIC_SPI_START + 98)
+#define FABRIC_SPS_IRQ (GIC_SPI_START + 99)
+#define USB1_HS_IRQ (GIC_SPI_START + 100)
+#define SDC4_IRQ_0 (GIC_SPI_START + 101)
+#define SDC3_IRQ_0 (GIC_SPI_START + 102)
+#define SDC2_IRQ_0 (GIC_SPI_START + 103)
+#define SDC1_IRQ_0 (GIC_SPI_START + 104)
+#define SPS_BAM_DMA_IRQ (GIC_SPI_START + 105)
+#define SPS_SEC_VIOL_IRQ (GIC_SPI_START + 106)
+#define SPS_MTI_0 (GIC_SPI_START + 107)
+#define SPS_MTI_1 (GIC_SPI_START + 108)
+#define SPS_MTI_2 (GIC_SPI_START + 109)
+#define SPS_MTI_3 (GIC_SPI_START + 110)
+#define SPS_MTI_4 (GIC_SPI_START + 111)
+#define SPS_MTI_5 (GIC_SPI_START + 112)
+#define SPS_MTI_6 (GIC_SPI_START + 113)
+#define SPS_MTI_7 (GIC_SPI_START + 114)
+#define SPS_MTI_8 (GIC_SPI_START + 115)
+#define SPS_MTI_9 (GIC_SPI_START + 116)
+#define SPS_MTI_10 (GIC_SPI_START + 117)
+#define SPS_MTI_11 (GIC_SPI_START + 118)
+#define SPS_MTI_12 (GIC_SPI_START + 119)
+#define SPS_MTI_13 (GIC_SPI_START + 120)
+#define SPS_MTI_14 (GIC_SPI_START + 121)
+#define SPS_MTI_15 (GIC_SPI_START + 122)
+#define SPS_MTI_16 (GIC_SPI_START + 123)
+#define SPS_MTI_17 (GIC_SPI_START + 124)
+#define SPS_MTI_18 (GIC_SPI_START + 125)
+#define SPS_MTI_19 (GIC_SPI_START + 126)
+#define SPS_MTI_20 (GIC_SPI_START + 127)
+#define SPS_MTI_21 (GIC_SPI_START + 128)
+#define SPS_MTI_22 (GIC_SPI_START + 129)
+#define SPS_MTI_23 (GIC_SPI_START + 130)
+#define SPS_MTI_24 (GIC_SPI_START + 131)
+#define SPS_MTI_25 (GIC_SPI_START + 132)
+#define SPS_MTI_26 (GIC_SPI_START + 133)
+#define SPS_MTI_27 (GIC_SPI_START + 134)
+#define SPS_MTI_28 (GIC_SPI_START + 135)
+#define SPS_MTI_29 (GIC_SPI_START + 136)
+#define SPS_MTI_30 (GIC_SPI_START + 137)
+#define SPS_MTI_31 (GIC_SPI_START + 138)
+#define UXMC_EBI2_WR_ER_DONE_IRQ (GIC_SPI_START + 139)
+#define UXMC_EBI2_OP_DONE_IRQ (GIC_SPI_START + 140)
+#define USB2_IRQ (GIC_SPI_START + 141)
+#define USB1_IRQ (GIC_SPI_START + 142)
+#define TSSC_SSBI_IRQ (GIC_SPI_START + 143)
+#define TSSC_SAMPLE_IRQ (GIC_SPI_START + 144)
+#define TSSC_PENUP_IRQ (GIC_SPI_START + 145)
+#define INT_UART1DM_IRQ (GIC_SPI_START + 146)
+#define GSBI1_QUP_IRQ (GIC_SPI_START + 147)
+#define INT_UART2DM_IRQ (GIC_SPI_START + 148)
+#define GSBI2_QUP_IRQ (GIC_SPI_START + 149)
+#define INT_UART3DM_IRQ (GIC_SPI_START + 150)
+#define GSBI3_QUP_IRQ (GIC_SPI_START + 151)
+#define INT_UART4DM_IRQ (GIC_SPI_START + 152)
+#define GSBI4_QUP_IRQ (GIC_SPI_START + 153)
+#define INT_UART5DM_IRQ (GIC_SPI_START + 154)
+#define GSBI5_QUP_IRQ (GIC_SPI_START + 155)
+#define INT_UART6DM_IRQ (GIC_SPI_START + 156)
+#define GSBI6_QUP_IRQ (GIC_SPI_START + 157)
+#define INT_UART7DM_IRQ (GIC_SPI_START + 158)
+#define GSBI7_QUP_IRQ (GIC_SPI_START + 159)
+#define INT_UART8DM_IRQ (GIC_SPI_START + 160)
+#define GSBI8_QUP_IRQ (GIC_SPI_START + 161)
+#define TSIF_TSPP_IRQ (GIC_SPI_START + 162)
+#define TSIF_BAM_IRQ (GIC_SPI_START + 163)
+#define TSIF2_IRQ (GIC_SPI_START + 164)
+#define TSIF1_IRQ (GIC_SPI_START + 165)
+#define INT_ADM1_MASTER (GIC_SPI_START + 166)
+#define INT_ADM1_AARM (GIC_SPI_START + 167)
+#define INT_ADM1_SD2 (GIC_SPI_START + 168)
+#define INT_ADM1_SD3 (GIC_SPI_START + 169)
+#define INT_ADM0_MASTER (GIC_SPI_START + 170)
+#define INT_ADM0_AARM (GIC_SPI_START + 171)
+#define INT_ADM0_SD2 (GIC_SPI_START + 172)
+#define INT_ADM0_SD3 (GIC_SPI_START + 173)
+#define CC_SCSS_WDT1CPU1BITEEXPIRED (GIC_SPI_START + 174)
+#define CC_SCSS_WDT1CPU0BITEEXPIRED (GIC_SPI_START + 175)
+#define CC_SCSS_WDT0CPU1BITEEXPIRED (GIC_SPI_START + 176)
+#define CC_SCSS_WDT0CPU0BITEEXPIRED (GIC_SPI_START + 177)
+#define TSENS_UPPER_LOWER_INT (GIC_SPI_START + 178)
+#define SSBI2_2_SC_CPU1_SECURE_INT (GIC_SPI_START + 179)
+#define SSBI2_2_SC_CPU1_NON_SECURE_INT (GIC_SPI_START + 180)
+#define SSBI2_1_SC_CPU1_SECURE_INT (GIC_SPI_START + 181)
+#define SSBI2_1_SC_CPU1_NON_SECURE_INT (GIC_SPI_START + 182)
+#define XPU_SUMMARY_IRQ (GIC_SPI_START + 183)
+#define BUS_EXCEPTION_SUMMARY_IRQ (GIC_SPI_START + 184)
+#define HSDDRX_SMICH0_IRQ (GIC_SPI_START + 185)
+#define HSDDRX_EBI1_IRQ (GIC_SPI_START + 186)
+#define SDC5_BAM_IRQ (GIC_SPI_START + 187)
+#define SDC5_IRQ_0 (GIC_SPI_START + 188)
+#define INT_UART9DM_IRQ (GIC_SPI_START + 189)
+#define GSBI9_QUP_IRQ (GIC_SPI_START + 190)
+#define INT_UART10DM_IRQ (GIC_SPI_START + 191)
+#define GSBI10_QUP_IRQ (GIC_SPI_START + 192)
+#define INT_UART11DM_IRQ (GIC_SPI_START + 193)
+#define GSBI11_QUP_IRQ (GIC_SPI_START + 194)
+#define INT_UART12DM_IRQ (GIC_SPI_START + 195)
+#define GSBI12_QUP_IRQ (GIC_SPI_START + 196)
+/*SPI 197 to 216 arent used in 8x60*/
+#define SMPSS_SPARE_1 (GIC_SPI_START + 217)
+#define SMPSS_SPARE_2 (GIC_SPI_START + 218)
+#define SMPSS_SPARE_3 (GIC_SPI_START + 219)
+#define SMPSS_SPARE_4 (GIC_SPI_START + 220)
+#define SMPSS_SPARE_5 (GIC_SPI_START + 221)
+#define SMPSS_SPARE_6 (GIC_SPI_START + 222)
+#define SMPSS_SPARE_7 (GIC_SPI_START + 223)
+
+#define NR_GPIO_IRQS 173
+#define NR_MSM_IRQS 256
+#define NR_BOARD_IRQS 0
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/irqs.h b/arch/arm/mach-msm/include/mach/irqs.h
index 164d355..8679a45 100644
--- a/arch/arm/mach-msm/include/mach/irqs.h
+++ b/arch/arm/mach-msm/include/mach/irqs.h
@@ -24,6 +24,8 @@
#elif defined(CONFIG_ARCH_QSD8X50)
#include "irqs-8x50.h"
#include "sirc.h"
+#elif defined(CONFIG_ARCH_MSM8X60)
+#include "irqs-8x60.h"
#elif defined(CONFIG_ARCH_MSM_ARM11)
#include "irqs-7x00.h"
#else
diff --git a/arch/arm/mach-msm/include/mach/memory.h b/arch/arm/mach-msm/include/mach/memory.h
index 50c7847..070e17d 100644
--- a/arch/arm/mach-msm/include/mach/memory.h
+++ b/arch/arm/mach-msm/include/mach/memory.h
@@ -23,6 +23,8 @@
#define PHYS_OFFSET UL(0x20000000)
#elif defined(CONFIG_ARCH_MSM7X30)
#define PHYS_OFFSET UL(0x00200000)
+#elif defined(CONFIG_ARCH_MSM8X60)
+#define PHYS_OFFSET UL(0x40200000)
#else
#define PHYS_OFFSET UL(0x10000000)
#endif
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h
new file mode 100644
index 0000000..45bab50
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ *
+ * The MSM peripherals are spread all over across 768MB of physical
+ * space, which makes just having a simple IO_ADDRESS macro to slide
+ * them into the right virtual location rough. Instead, we will
+ * provide a master phys->virt mapping for peripherals here.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_IOMAP_8X60_H
+#define __ASM_ARCH_MSM_IOMAP_8X60_H
+
+/* Physical base address and size of peripherals.
+ * Ordered by the virtual base addresses they will be mapped at.
+ *
+ * MSM_VIC_BASE must be an value that can be loaded via a "mov"
+ * instruction, otherwise entry-macro.S will not compile.
+ *
+ * If you add or remove entries here, you'll want to edit the
+ * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your
+ * changes.
+ *
+ */
+
+#define MSM_QGIC_DIST_BASE IOMEM(0xF0000000)
+#define MSM_QGIC_DIST_PHYS 0x02080000
+#define MSM_QGIC_DIST_SIZE SZ_4K
+
+#define MSM_QGIC_CPU_BASE IOMEM(0xF0001000)
+#define MSM_QGIC_CPU_PHYS 0x02081000
+#define MSM_QGIC_CPU_SIZE SZ_4K
+
+#define MSM_ACC_BASE IOMEM(0xF0002000)
+#define MSM_ACC_PHYS 0x02001000
+#define MSM_ACC_SIZE SZ_4K
+
+#define MSM_GCC_BASE IOMEM(0xF0003000)
+#define MSM_GCC_PHYS 0x02082000
+#define MSM_GCC_SIZE SZ_4K
+
+#define MSM_TLMM_BASE IOMEM(0xF0004000)
+#define MSM_TLMM_PHYS 0x00800000
+#define MSM_TLMM_SIZE SZ_16K
+
+#define MSM_SHARED_RAM_BASE IOMEM(0xF0100000)
+#define MSM_SHARED_RAM_SIZE SZ_1M
+
+#define MSM_TMR_BASE IOMEM(0xF0200000)
+#define MSM_TMR_PHYS 0x02000000
+#define MSM_TMR_SIZE (SZ_1M)
+
+#define MSM_GPT_BASE (MSM_TMR_BASE + 0x4)
+#define MSM_DGT_BASE (MSM_TMR_BASE + 0x24)
+
+#define MSM_IOMMU_JPEGD_PHYS 0x07300000
+#define MSM_IOMMU_JPEGD_SIZE SZ_1M
+
+#define MSM_IOMMU_VPE_PHYS 0x07400000
+#define MSM_IOMMU_VPE_SIZE SZ_1M
+
+#define MSM_IOMMU_MDP0_PHYS 0x07500000
+#define MSM_IOMMU_MDP0_SIZE SZ_1M
+
+#define MSM_IOMMU_MDP1_PHYS 0x07600000
+#define MSM_IOMMU_MDP1_SIZE SZ_1M
+
+#define MSM_IOMMU_ROT_PHYS 0x07700000
+#define MSM_IOMMU_ROT_SIZE SZ_1M
+
+#define MSM_IOMMU_IJPEG_PHYS 0x07800000
+#define MSM_IOMMU_IJPEG_SIZE SZ_1M
+
+#define MSM_IOMMU_VFE_PHYS 0x07900000
+#define MSM_IOMMU_VFE_SIZE SZ_1M
+
+#define MSM_IOMMU_VCODEC_A_PHYS 0x07A00000
+#define MSM_IOMMU_VCODEC_A_SIZE SZ_1M
+
+#define MSM_IOMMU_VCODEC_B_PHYS 0x07B00000
+#define MSM_IOMMU_VCODEC_B_SIZE SZ_1M
+
+#define MSM_IOMMU_GFX3D_PHYS 0x07C00000
+#define MSM_IOMMU_GFX3D_SIZE SZ_1M
+
+#define MSM_IOMMU_GFX2D0_PHYS 0x07D00000
+#define MSM_IOMMU_GFX2D0_SIZE SZ_1M
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap.h b/arch/arm/mach-msm/include/mach/msm_iomap.h
index e6b1821..8e24dd8 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap.h
@@ -47,8 +47,12 @@
#include "msm_iomap-7x30.h"
#elif defined(CONFIG_ARCH_QSD8X50)
#include "msm_iomap-8x50.h"
+#elif defined(CONFIG_ARCH_MSM8X60)
+#include "msm_iomap-8x60.h"
#else
#include "msm_iomap-7x00.h"
#endif
+
+
#endif
diff --git a/arch/arm/mach-msm/include/mach/smp.h b/arch/arm/mach-msm/include/mach/smp.h
new file mode 100644
index 0000000..3ff7bf5
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/smp.h
@@ -0,0 +1,39 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Code Aurora nor
+ * the names of its contributors may be used to endorse or promote
+ * products derived from this software without specific prior written
+ * permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_SMP_H
+#define __ASM_ARCH_MSM_SMP_H
+
+#include <asm/hardware/gic.h>
+
+static inline void smp_cross_call(const struct cpumask *mask)
+{
+ gic_raise_softirq(mask, 1);
+}
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/vmalloc.h b/arch/arm/mach-msm/include/mach/vmalloc.h
index 05f81fd..31a32ad 100644
--- a/arch/arm/mach-msm/include/mach/vmalloc.h
+++ b/arch/arm/mach-msm/include/mach/vmalloc.h
@@ -16,7 +16,7 @@
#ifndef __ASM_ARCH_MSM_VMALLOC_H
#define __ASM_ARCH_MSM_VMALLOC_H
-#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
+#define VMALLOC_END 0xd0000000
#endif
diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c
index 1c05060..d36b610 100644
--- a/arch/arm/mach-msm/io.c
+++ b/arch/arm/mach-msm/io.c
@@ -100,6 +100,21 @@
}
#endif /* CONFIG_ARCH_QSD8X50 */
+#ifdef CONFIG_ARCH_MSM8X60
+static struct map_desc msm8x60_io_desc[] __initdata = {
+ MSM_DEVICE(QGIC_DIST),
+ MSM_DEVICE(QGIC_CPU),
+ MSM_DEVICE(TMR),
+ MSM_DEVICE(ACC),
+ MSM_DEVICE(GCC),
+};
+
+void __init msm_map_msm8x60_io(void)
+{
+ iotable_init(msm8x60_io_desc, ARRAY_SIZE(msm8x60_io_desc));
+}
+#endif /* CONFIG_ARCH_MSM8X60 */
+
#ifdef CONFIG_ARCH_MSM7X30
static struct map_desc msm7x30_io_desc[] __initdata = {
MSM_DEVICE(VIC),
diff --git a/arch/arm/mach-msm/iommu.c b/arch/arm/mach-msm/iommu.c
new file mode 100644
index 0000000..f71747d
--- /dev/null
+++ b/arch/arm/mach-msm/iommu.c
@@ -0,0 +1,597 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/iommu.h>
+
+#include <asm/cacheflush.h>
+#include <asm/sizes.h>
+
+#include <mach/iommu_hw-8xxx.h>
+#include <mach/iommu.h>
+
+DEFINE_SPINLOCK(msm_iommu_lock);
+
+struct msm_priv {
+ unsigned long *pgtable;
+ struct list_head list_attached;
+};
+
+static void __flush_iotlb(struct iommu_domain *domain)
+{
+ struct msm_priv *priv = domain->priv;
+ struct msm_iommu_drvdata *iommu_drvdata;
+ struct msm_iommu_ctx_drvdata *ctx_drvdata;
+
+#ifndef CONFIG_IOMMU_PGTABLES_L2
+ unsigned long *fl_table = priv->pgtable;
+ int i;
+
+ dmac_flush_range(fl_table, fl_table + SZ_16K);
+
+ for (i = 0; i < NUM_FL_PTE; i++)
+ if ((fl_table[i] & 0x03) == FL_TYPE_TABLE) {
+ void *sl_table = __va(fl_table[i] & FL_BASE_MASK);
+ dmac_flush_range(sl_table, sl_table + SZ_4K);
+ }
+#endif
+
+ list_for_each_entry(ctx_drvdata, &priv->list_attached, attached_elm) {
+ if (!ctx_drvdata->pdev || !ctx_drvdata->pdev->dev.parent)
+ BUG();
+
+ iommu_drvdata = dev_get_drvdata(ctx_drvdata->pdev->dev.parent);
+ SET_CTX_TLBIALL(iommu_drvdata->base, ctx_drvdata->num, 0);
+ }
+}
+
+static void __reset_context(void __iomem *base, int ctx)
+{
+ SET_BPRCOSH(base, ctx, 0);
+ SET_BPRCISH(base, ctx, 0);
+ SET_BPRCNSH(base, ctx, 0);
+ SET_BPSHCFG(base, ctx, 0);
+ SET_BPMTCFG(base, ctx, 0);
+ SET_ACTLR(base, ctx, 0);
+ SET_SCTLR(base, ctx, 0);
+ SET_FSRRESTORE(base, ctx, 0);
+ SET_TTBR0(base, ctx, 0);
+ SET_TTBR1(base, ctx, 0);
+ SET_TTBCR(base, ctx, 0);
+ SET_BFBCR(base, ctx, 0);
+ SET_PAR(base, ctx, 0);
+ SET_FAR(base, ctx, 0);
+ SET_CTX_TLBIALL(base, ctx, 0);
+ SET_TLBFLPTER(base, ctx, 0);
+ SET_TLBSLPTER(base, ctx, 0);
+ SET_TLBLKCR(base, ctx, 0);
+ SET_PRRR(base, ctx, 0);
+ SET_NMRR(base, ctx, 0);
+ SET_CONTEXTIDR(base, ctx, 0);
+}
+
+static void __program_context(void __iomem *base, int ctx, phys_addr_t pgtable)
+{
+ __reset_context(base, ctx);
+
+ /* Set up HTW mode */
+ /* TLB miss configuration: perform HTW on miss */
+ SET_TLBMCFG(base, ctx, 0x3);
+
+ /* V2P configuration: HTW for access */
+ SET_V2PCFG(base, ctx, 0x3);
+
+ SET_TTBCR(base, ctx, 0);
+ SET_TTBR0_PA(base, ctx, (pgtable >> 14));
+
+ /* Invalidate the TLB for this context */
+ SET_CTX_TLBIALL(base, ctx, 0);
+
+ /* Set interrupt number to "secure" interrupt */
+ SET_IRPTNDX(base, ctx, 0);
+
+ /* Enable context fault interrupt */
+ SET_CFEIE(base, ctx, 1);
+
+ /* Stall access on a context fault and let the handler deal with it */
+ SET_CFCFG(base, ctx, 1);
+
+ /* Redirect all cacheable requests to L2 slave port. */
+ SET_RCISH(base, ctx, 1);
+ SET_RCOSH(base, ctx, 1);
+ SET_RCNSH(base, ctx, 1);
+
+ /* Turn on TEX Remap */
+ SET_TRE(base, ctx, 1);
+
+ /* Do not configure PRRR / NMRR on the IOMMU for now. We will assume
+ * TEX class 0 for everything until attributes are properly worked out
+ */
+ SET_PRRR(base, ctx, 0);
+ SET_NMRR(base, ctx, 0);
+
+ /* Turn on BFB prefetch */
+ SET_BFBDFE(base, ctx, 1);
+
+#ifdef CONFIG_IOMMU_PGTABLES_L2
+ /* Configure page tables as inner-cacheable and shareable to reduce
+ * the TLB miss penalty.
+ */
+ SET_TTBR0_SH(base, ctx, 1);
+ SET_TTBR1_SH(base, ctx, 1);
+
+ SET_TTBR0_NOS(base, ctx, 1);
+ SET_TTBR1_NOS(base, ctx, 1);
+
+ SET_TTBR0_IRGNH(base, ctx, 0); /* WB, WA */
+ SET_TTBR0_IRGNL(base, ctx, 1);
+
+ SET_TTBR1_IRGNH(base, ctx, 0); /* WB, WA */
+ SET_TTBR1_IRGNL(base, ctx, 1);
+
+ SET_TTBR0_ORGN(base, ctx, 1); /* WB, WA */
+ SET_TTBR1_ORGN(base, ctx, 1); /* WB, WA */
+#endif
+
+ /* Enable the MMU */
+ SET_M(base, ctx, 1);
+}
+
+static int msm_iommu_domain_init(struct iommu_domain *domain)
+{
+ struct msm_priv *priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+
+ if (!priv)
+ goto fail_nomem;
+
+ INIT_LIST_HEAD(&priv->list_attached);
+ priv->pgtable = (unsigned long *)__get_free_pages(GFP_KERNEL,
+ get_order(SZ_16K));
+
+ if (!priv->pgtable)
+ goto fail_nomem;
+
+ memset(priv->pgtable, 0, SZ_16K);
+ domain->priv = priv;
+ return 0;
+
+fail_nomem:
+ kfree(priv);
+ return -ENOMEM;
+}
+
+static void msm_iommu_domain_destroy(struct iommu_domain *domain)
+{
+ struct msm_priv *priv;
+ unsigned long flags;
+ unsigned long *fl_table;
+ int i;
+
+ spin_lock_irqsave(&msm_iommu_lock, flags);
+ priv = domain->priv;
+ domain->priv = NULL;
+
+ if (priv) {
+ fl_table = priv->pgtable;
+
+ for (i = 0; i < NUM_FL_PTE; i++)
+ if ((fl_table[i] & 0x03) == FL_TYPE_TABLE)
+ free_page((unsigned long) __va(((fl_table[i]) &
+ FL_BASE_MASK)));
+
+ free_pages((unsigned long)priv->pgtable, get_order(SZ_16K));
+ priv->pgtable = NULL;
+ }
+
+ kfree(priv);
+ spin_unlock_irqrestore(&msm_iommu_lock, flags);
+}
+
+static int msm_iommu_attach_dev(struct iommu_domain *domain, struct device *dev)
+{
+ struct msm_priv *priv;
+ struct msm_iommu_ctx_dev *ctx_dev;
+ struct msm_iommu_drvdata *iommu_drvdata;
+ struct msm_iommu_ctx_drvdata *ctx_drvdata;
+ struct msm_iommu_ctx_drvdata *tmp_drvdata;
+ int ret = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&msm_iommu_lock, flags);
+
+ priv = domain->priv;
+
+ if (!priv || !dev) {
+ ret = -EINVAL;
+ goto fail;
+ }
+
+ iommu_drvdata = dev_get_drvdata(dev->parent);
+ ctx_drvdata = dev_get_drvdata(dev);
+ ctx_dev = dev->platform_data;
+
+ if (!iommu_drvdata || !ctx_drvdata || !ctx_dev) {
+ ret = -EINVAL;
+ goto fail;
+ }
+
+ list_for_each_entry(tmp_drvdata, &priv->list_attached, attached_elm)
+ if (tmp_drvdata == ctx_drvdata) {
+ ret = -EBUSY;
+ goto fail;
+ }
+
+ __program_context(iommu_drvdata->base, ctx_dev->num,
+ __pa(priv->pgtable));
+
+ list_add(&(ctx_drvdata->attached_elm), &priv->list_attached);
+ __flush_iotlb(domain);
+
+fail:
+ spin_unlock_irqrestore(&msm_iommu_lock, flags);
+ return ret;
+}
+
+static void msm_iommu_detach_dev(struct iommu_domain *domain,
+ struct device *dev)
+{
+ struct msm_priv *priv;
+ struct msm_iommu_ctx_dev *ctx_dev;
+ struct msm_iommu_drvdata *iommu_drvdata;
+ struct msm_iommu_ctx_drvdata *ctx_drvdata;
+ unsigned long flags;
+
+ spin_lock_irqsave(&msm_iommu_lock, flags);
+ priv = domain->priv;
+
+ if (!priv || !dev)
+ goto fail;
+
+ iommu_drvdata = dev_get_drvdata(dev->parent);
+ ctx_drvdata = dev_get_drvdata(dev);
+ ctx_dev = dev->platform_data;
+
+ if (!iommu_drvdata || !ctx_drvdata || !ctx_dev)
+ goto fail;
+
+ __flush_iotlb(domain);
+ __reset_context(iommu_drvdata->base, ctx_dev->num);
+ list_del_init(&ctx_drvdata->attached_elm);
+
+fail:
+ spin_unlock_irqrestore(&msm_iommu_lock, flags);
+}
+
+static int msm_iommu_map(struct iommu_domain *domain, unsigned long va,
+ phys_addr_t pa, int order, int prot)
+{
+ struct msm_priv *priv;
+ unsigned long flags;
+ unsigned long *fl_table;
+ unsigned long *fl_pte;
+ unsigned long fl_offset;
+ unsigned long *sl_table;
+ unsigned long *sl_pte;
+ unsigned long sl_offset;
+ size_t len = 0x1000UL << order;
+ int ret = 0;
+
+ spin_lock_irqsave(&msm_iommu_lock, flags);
+ priv = domain->priv;
+
+ if (!priv) {
+ ret = -EINVAL;
+ goto fail;
+ }
+
+ fl_table = priv->pgtable;
+
+ if (len != SZ_16M && len != SZ_1M &&
+ len != SZ_64K && len != SZ_4K) {
+ pr_debug("Bad size: %d\n", len);
+ ret = -EINVAL;
+ goto fail;
+ }
+
+ if (!fl_table) {
+ pr_debug("Null page table\n");
+ ret = -EINVAL;
+ goto fail;
+ }
+
+ fl_offset = FL_OFFSET(va); /* Upper 12 bits */
+ fl_pte = fl_table + fl_offset; /* int pointers, 4 bytes */
+
+ if (len == SZ_16M) {
+ int i = 0;
+ for (i = 0; i < 16; i++)
+ *(fl_pte+i) = (pa & 0xFF000000) | FL_SUPERSECTION |
+ FL_AP_READ | FL_AP_WRITE | FL_TYPE_SECT |
+ FL_SHARED;
+ }
+
+ if (len == SZ_1M)
+ *fl_pte = (pa & 0xFFF00000) | FL_AP_READ | FL_AP_WRITE |
+ FL_TYPE_SECT | FL_SHARED;
+
+ /* Need a 2nd level table */
+ if ((len == SZ_4K || len == SZ_64K) && (*fl_pte) == 0) {
+ unsigned long *sl;
+ sl = (unsigned long *) __get_free_pages(GFP_KERNEL,
+ get_order(SZ_4K));
+
+ if (!sl) {
+ pr_debug("Could not allocate second level table\n");
+ ret = -ENOMEM;
+ goto fail;
+ }
+
+ memset(sl, 0, SZ_4K);
+ *fl_pte = ((((int)__pa(sl)) & FL_BASE_MASK) | FL_TYPE_TABLE);
+ }
+
+ sl_table = (unsigned long *) __va(((*fl_pte) & FL_BASE_MASK));
+ sl_offset = SL_OFFSET(va);
+ sl_pte = sl_table + sl_offset;
+
+
+ if (len == SZ_4K)
+ *sl_pte = (pa & SL_BASE_MASK_SMALL) | SL_AP0 | SL_AP1 |
+ SL_SHARED | SL_TYPE_SMALL;
+
+ if (len == SZ_64K) {
+ int i;
+
+ for (i = 0; i < 16; i++)
+ *(sl_pte+i) = (pa & SL_BASE_MASK_LARGE) | SL_AP0 |
+ SL_AP1 | SL_SHARED | SL_TYPE_LARGE;
+ }
+
+ __flush_iotlb(domain);
+fail:
+ spin_unlock_irqrestore(&msm_iommu_lock, flags);
+ return ret;
+}
+
+static int msm_iommu_unmap(struct iommu_domain *domain, unsigned long va,
+ int order)
+{
+ struct msm_priv *priv;
+ unsigned long flags;
+ unsigned long *fl_table;
+ unsigned long *fl_pte;
+ unsigned long fl_offset;
+ unsigned long *sl_table;
+ unsigned long *sl_pte;
+ unsigned long sl_offset;
+ size_t len = 0x1000UL << order;
+ int i, ret = 0;
+
+ spin_lock_irqsave(&msm_iommu_lock, flags);
+
+ priv = domain->priv;
+
+ if (!priv) {
+ ret = -ENODEV;
+ goto fail;
+ }
+
+ fl_table = priv->pgtable;
+
+ if (len != SZ_16M && len != SZ_1M &&
+ len != SZ_64K && len != SZ_4K) {
+ pr_debug("Bad length: %d\n", len);
+ ret = -EINVAL;
+ goto fail;
+ }
+
+ if (!fl_table) {
+ pr_debug("Null page table\n");
+ ret = -EINVAL;
+ goto fail;
+ }
+
+ fl_offset = FL_OFFSET(va); /* Upper 12 bits */
+ fl_pte = fl_table + fl_offset; /* int pointers, 4 bytes */
+
+ if (*fl_pte == 0) {
+ pr_debug("First level PTE is 0\n");
+ ret = -ENODEV;
+ goto fail;
+ }
+
+ /* Unmap supersection */
+ if (len == SZ_16M)
+ for (i = 0; i < 16; i++)
+ *(fl_pte+i) = 0;
+
+ if (len == SZ_1M)
+ *fl_pte = 0;
+
+ sl_table = (unsigned long *) __va(((*fl_pte) & FL_BASE_MASK));
+ sl_offset = SL_OFFSET(va);
+ sl_pte = sl_table + sl_offset;
+
+ if (len == SZ_64K) {
+ for (i = 0; i < 16; i++)
+ *(sl_pte+i) = 0;
+ }
+
+ if (len == SZ_4K)
+ *sl_pte = 0;
+
+ if (len == SZ_4K || len == SZ_64K) {
+ int used = 0;
+
+ for (i = 0; i < NUM_SL_PTE; i++)
+ if (sl_table[i])
+ used = 1;
+ if (!used) {
+ free_page((unsigned long)sl_table);
+ *fl_pte = 0;
+ }
+ }
+
+ __flush_iotlb(domain);
+fail:
+ spin_unlock_irqrestore(&msm_iommu_lock, flags);
+ return ret;
+}
+
+static phys_addr_t msm_iommu_iova_to_phys(struct iommu_domain *domain,
+ unsigned long va)
+{
+ struct msm_priv *priv;
+ struct msm_iommu_drvdata *iommu_drvdata;
+ struct msm_iommu_ctx_drvdata *ctx_drvdata;
+ unsigned int par;
+ unsigned long flags;
+ void __iomem *base;
+ phys_addr_t ret = 0;
+ int ctx;
+
+ spin_lock_irqsave(&msm_iommu_lock, flags);
+
+ priv = domain->priv;
+ if (list_empty(&priv->list_attached))
+ goto fail;
+
+ ctx_drvdata = list_entry(priv->list_attached.next,
+ struct msm_iommu_ctx_drvdata, attached_elm);
+ iommu_drvdata = dev_get_drvdata(ctx_drvdata->pdev->dev.parent);
+
+ base = iommu_drvdata->base;
+ ctx = ctx_drvdata->num;
+
+ /* Invalidate context TLB */
+ SET_CTX_TLBIALL(base, ctx, 0);
+ SET_V2PPR_VA(base, ctx, va >> V2Pxx_VA_SHIFT);
+
+ if (GET_FAULT(base, ctx))
+ goto fail;
+
+ par = GET_PAR(base, ctx);
+
+ /* We are dealing with a supersection */
+ if (GET_NOFAULT_SS(base, ctx))
+ ret = (par & 0xFF000000) | (va & 0x00FFFFFF);
+ else /* Upper 20 bits from PAR, lower 12 from VA */
+ ret = (par & 0xFFFFF000) | (va & 0x00000FFF);
+
+fail:
+ spin_unlock_irqrestore(&msm_iommu_lock, flags);
+ return ret;
+}
+
+static int msm_iommu_domain_has_cap(struct iommu_domain *domain,
+ unsigned long cap)
+{
+ return 0;
+}
+
+static void print_ctx_regs(void __iomem *base, int ctx)
+{
+ unsigned int fsr = GET_FSR(base, ctx);
+ pr_err("FAR = %08x PAR = %08x\n",
+ GET_FAR(base, ctx), GET_PAR(base, ctx));
+ pr_err("FSR = %08x [%s%s%s%s%s%s%s%s%s%s]\n", fsr,
+ (fsr & 0x02) ? "TF " : "",
+ (fsr & 0x04) ? "AFF " : "",
+ (fsr & 0x08) ? "APF " : "",
+ (fsr & 0x10) ? "TLBMF " : "",
+ (fsr & 0x20) ? "HTWDEEF " : "",
+ (fsr & 0x40) ? "HTWSEEF " : "",
+ (fsr & 0x80) ? "MHF " : "",
+ (fsr & 0x10000) ? "SL " : "",
+ (fsr & 0x40000000) ? "SS " : "",
+ (fsr & 0x80000000) ? "MULTI " : "");
+
+ pr_err("FSYNR0 = %08x FSYNR1 = %08x\n",
+ GET_FSYNR0(base, ctx), GET_FSYNR1(base, ctx));
+ pr_err("TTBR0 = %08x TTBR1 = %08x\n",
+ GET_TTBR0(base, ctx), GET_TTBR1(base, ctx));
+ pr_err("SCTLR = %08x ACTLR = %08x\n",
+ GET_SCTLR(base, ctx), GET_ACTLR(base, ctx));
+ pr_err("PRRR = %08x NMRR = %08x\n",
+ GET_PRRR(base, ctx), GET_NMRR(base, ctx));
+}
+
+irqreturn_t msm_iommu_fault_handler(int irq, void *dev_id)
+{
+ struct msm_iommu_drvdata *drvdata = dev_id;
+ void __iomem *base;
+ unsigned int fsr = 0;
+ int ncb = 0, i = 0;
+
+ spin_lock(&msm_iommu_lock);
+
+ if (!drvdata) {
+ pr_err("Invalid device ID in context interrupt handler\n");
+ goto fail;
+ }
+
+ base = drvdata->base;
+
+ pr_err("===== WOAH! =====\n");
+ pr_err("Unexpected IOMMU page fault!\n");
+ pr_err("base = %08x\n", (unsigned int) base);
+
+ ncb = GET_NCB(base)+1;
+ for (i = 0; i < ncb; i++) {
+ fsr = GET_FSR(base, i);
+ if (fsr) {
+ pr_err("Fault occurred in context %d.\n", i);
+ pr_err("Interesting registers:\n");
+ print_ctx_regs(base, i);
+ SET_FSR(base, i, 0x4000000F);
+ }
+ }
+fail:
+ spin_unlock(&msm_iommu_lock);
+ return 0;
+}
+
+static struct iommu_ops msm_iommu_ops = {
+ .domain_init = msm_iommu_domain_init,
+ .domain_destroy = msm_iommu_domain_destroy,
+ .attach_dev = msm_iommu_attach_dev,
+ .detach_dev = msm_iommu_detach_dev,
+ .map = msm_iommu_map,
+ .unmap = msm_iommu_unmap,
+ .iova_to_phys = msm_iommu_iova_to_phys,
+ .domain_has_cap = msm_iommu_domain_has_cap
+};
+
+static int msm_iommu_init(void)
+{
+ register_iommu(&msm_iommu_ops);
+ return 0;
+}
+
+subsys_initcall(msm_iommu_init);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Stepan Moskovchenko <stepanm@codeaurora.org>");
diff --git a/arch/arm/mach-msm/iommu_dev.c b/arch/arm/mach-msm/iommu_dev.c
new file mode 100644
index 0000000..c33ae78
--- /dev/null
+++ b/arch/arm/mach-msm/iommu_dev.c
@@ -0,0 +1,374 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/iommu.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+
+#include <mach/iommu_hw-8xxx.h>
+#include <mach/iommu.h>
+
+struct iommu_ctx_iter_data {
+ /* input */
+ const char *name;
+
+ /* output */
+ struct device *dev;
+};
+
+static struct platform_device *msm_iommu_root_dev;
+
+static int each_iommu_ctx(struct device *dev, void *data)
+{
+ struct iommu_ctx_iter_data *res = data;
+ struct msm_iommu_ctx_dev *c = dev->platform_data;
+
+ if (!res || !c || !c->name || !res->name)
+ return -EINVAL;
+
+ if (!strcmp(res->name, c->name)) {
+ res->dev = dev;
+ return 1;
+ }
+ return 0;
+}
+
+static int each_iommu(struct device *dev, void *data)
+{
+ return device_for_each_child(dev, data, each_iommu_ctx);
+}
+
+struct device *msm_iommu_get_ctx(const char *ctx_name)
+{
+ struct iommu_ctx_iter_data r;
+ int found;
+
+ if (!msm_iommu_root_dev) {
+ pr_err("No root IOMMU device.\n");
+ goto fail;
+ }
+
+ r.name = ctx_name;
+ found = device_for_each_child(&msm_iommu_root_dev->dev, &r, each_iommu);
+
+ if (!found) {
+ pr_err("Could not find context <%s>\n", ctx_name);
+ goto fail;
+ }
+
+ return r.dev;
+fail:
+ return NULL;
+}
+EXPORT_SYMBOL(msm_iommu_get_ctx);
+
+static void msm_iommu_reset(void __iomem *base)
+{
+ int ctx, ncb;
+
+ SET_RPUE(base, 0);
+ SET_RPUEIE(base, 0);
+ SET_ESRRESTORE(base, 0);
+ SET_TBE(base, 0);
+ SET_CR(base, 0);
+ SET_SPDMBE(base, 0);
+ SET_TESTBUSCR(base, 0);
+ SET_TLBRSW(base, 0);
+ SET_GLOBAL_TLBIALL(base, 0);
+ SET_RPU_ACR(base, 0);
+ SET_TLBLKCRWE(base, 1);
+ ncb = GET_NCB(base)+1;
+
+ for (ctx = 0; ctx < ncb; ctx++) {
+ SET_BPRCOSH(base, ctx, 0);
+ SET_BPRCISH(base, ctx, 0);
+ SET_BPRCNSH(base, ctx, 0);
+ SET_BPSHCFG(base, ctx, 0);
+ SET_BPMTCFG(base, ctx, 0);
+ SET_ACTLR(base, ctx, 0);
+ SET_SCTLR(base, ctx, 0);
+ SET_FSRRESTORE(base, ctx, 0);
+ SET_TTBR0(base, ctx, 0);
+ SET_TTBR1(base, ctx, 0);
+ SET_TTBCR(base, ctx, 0);
+ SET_BFBCR(base, ctx, 0);
+ SET_PAR(base, ctx, 0);
+ SET_FAR(base, ctx, 0);
+ SET_CTX_TLBIALL(base, ctx, 0);
+ SET_TLBFLPTER(base, ctx, 0);
+ SET_TLBSLPTER(base, ctx, 0);
+ SET_TLBLKCR(base, ctx, 0);
+ SET_PRRR(base, ctx, 0);
+ SET_NMRR(base, ctx, 0);
+ SET_CONTEXTIDR(base, ctx, 0);
+ }
+}
+
+static int msm_iommu_probe(struct platform_device *pdev)
+{
+ struct resource *r;
+ struct clk *iommu_clk;
+ struct msm_iommu_drvdata *drvdata;
+ struct msm_iommu_dev *iommu_dev = pdev->dev.platform_data;
+ void __iomem *regs_base;
+ resource_size_t len;
+ int ret = 0, ncb, nm2v, irq;
+
+ if (pdev->id != -1) {
+ drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL);
+
+ if (!drvdata) {
+ ret = -ENOMEM;
+ goto fail;
+ }
+
+ if (!iommu_dev) {
+ ret = -ENODEV;
+ goto fail;
+ }
+
+ if (iommu_dev->clk_rate != 0) {
+ iommu_clk = clk_get(&pdev->dev, "iommu_clk");
+
+ if (IS_ERR(iommu_clk)) {
+ ret = -ENODEV;
+ goto fail;
+ }
+
+ if (iommu_dev->clk_rate > 0) {
+ ret = clk_set_rate(iommu_clk,
+ iommu_dev->clk_rate);
+ if (ret) {
+ clk_put(iommu_clk);
+ goto fail;
+ }
+ }
+
+ ret = clk_enable(iommu_clk);
+ if (ret) {
+ clk_put(iommu_clk);
+ goto fail;
+ }
+ clk_put(iommu_clk);
+ }
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "physbase");
+ if (!r) {
+ ret = -ENODEV;
+ goto fail;
+ }
+
+ len = r->end - r->start + 1;
+
+ r = request_mem_region(r->start, len, r->name);
+ if (!r) {
+ pr_err("Could not request memory region: "
+ "start=%p, len=%d\n", (void *) r->start, len);
+ ret = -EBUSY;
+ goto fail;
+ }
+
+ regs_base = ioremap(r->start, len);
+
+ if (!regs_base) {
+ pr_err("Could not ioremap: start=%p, len=%d\n",
+ (void *) r->start, len);
+ ret = -EBUSY;
+ goto fail;
+ }
+
+ irq = platform_get_irq_byname(pdev, "secure_irq");
+ if (irq < 0) {
+ ret = -ENODEV;
+ goto fail;
+ }
+
+ mb();
+
+ if (GET_IDR(regs_base) == 0) {
+ pr_err("Invalid IDR value detected\n");
+ ret = -ENODEV;
+ goto fail;
+ }
+
+ ret = request_irq(irq, msm_iommu_fault_handler, 0,
+ "msm_iommu_secure_irpt_handler", drvdata);
+ if (ret) {
+ pr_err("Request IRQ %d failed with ret=%d\n", irq, ret);
+ goto fail;
+ }
+
+ msm_iommu_reset(regs_base);
+ drvdata->base = regs_base;
+ drvdata->irq = irq;
+
+ nm2v = GET_NM2VCBMT((unsigned long) regs_base);
+ ncb = GET_NCB((unsigned long) regs_base);
+
+ pr_info("device %s mapped at %p, irq %d with %d ctx banks\n",
+ iommu_dev->name, regs_base, irq, ncb+1);
+
+ platform_set_drvdata(pdev, drvdata);
+ } else
+ msm_iommu_root_dev = pdev;
+
+ return 0;
+
+fail:
+ kfree(drvdata);
+ return ret;
+}
+
+static int msm_iommu_remove(struct platform_device *pdev)
+{
+ struct msm_iommu_drvdata *drv = NULL;
+
+ drv = platform_get_drvdata(pdev);
+ if (drv) {
+ memset(drv, 0, sizeof(struct msm_iommu_drvdata));
+ kfree(drv);
+ platform_set_drvdata(pdev, NULL);
+ }
+ return 0;
+}
+
+static int msm_iommu_ctx_probe(struct platform_device *pdev)
+{
+ struct msm_iommu_ctx_dev *c = pdev->dev.platform_data;
+ struct msm_iommu_drvdata *drvdata;
+ struct msm_iommu_ctx_drvdata *ctx_drvdata = NULL;
+ int i, ret = 0;
+ if (!c || !pdev->dev.parent) {
+ ret = -EINVAL;
+ goto fail;
+ }
+
+ drvdata = dev_get_drvdata(pdev->dev.parent);
+
+ if (!drvdata) {
+ ret = -ENODEV;
+ goto fail;
+ }
+
+ ctx_drvdata = kzalloc(sizeof(*ctx_drvdata), GFP_KERNEL);
+ if (!ctx_drvdata) {
+ ret = -ENOMEM;
+ goto fail;
+ }
+ ctx_drvdata->num = c->num;
+ ctx_drvdata->pdev = pdev;
+
+ INIT_LIST_HEAD(&ctx_drvdata->attached_elm);
+ platform_set_drvdata(pdev, ctx_drvdata);
+
+ /* Program the M2V tables for this context */
+ for (i = 0; i < MAX_NUM_MIDS; i++) {
+ int mid = c->mids[i];
+ if (mid == -1)
+ break;
+
+ SET_M2VCBR_N(drvdata->base, mid, 0);
+ SET_CBACR_N(drvdata->base, c->num, 0);
+
+ /* Set VMID = MID */
+ SET_VMID(drvdata->base, mid, mid);
+
+ /* Set the context number for that MID to this context */
+ SET_CBNDX(drvdata->base, mid, c->num);
+
+ /* Set MID associated with this context bank */
+ SET_CBVMID(drvdata->base, c->num, mid);
+
+ /* Set security bit override to be Non-secure */
+ SET_NSCFG(drvdata->base, mid, 3);
+ }
+
+ pr_info("context device %s with bank index %d\n", c->name, c->num);
+
+ return 0;
+fail:
+ kfree(ctx_drvdata);
+ return ret;
+}
+
+static int msm_iommu_ctx_remove(struct platform_device *pdev)
+{
+ struct msm_iommu_ctx_drvdata *drv = NULL;
+ drv = platform_get_drvdata(pdev);
+ if (drv) {
+ memset(drv, 0, sizeof(struct msm_iommu_ctx_drvdata));
+ kfree(drv);
+ platform_set_drvdata(pdev, NULL);
+ }
+ return 0;
+}
+
+static struct platform_driver msm_iommu_driver = {
+ .driver = {
+ .name = "msm_iommu",
+ },
+ .probe = msm_iommu_probe,
+ .remove = msm_iommu_remove,
+};
+
+static struct platform_driver msm_iommu_ctx_driver = {
+ .driver = {
+ .name = "msm_iommu_ctx",
+ },
+ .probe = msm_iommu_ctx_probe,
+ .remove = msm_iommu_ctx_remove,
+};
+
+static int msm_iommu_driver_init(void)
+{
+ int ret;
+ ret = platform_driver_register(&msm_iommu_driver);
+ if (ret != 0) {
+ pr_err("Failed to register IOMMU driver\n");
+ goto error;
+ }
+
+ ret = platform_driver_register(&msm_iommu_ctx_driver);
+ if (ret != 0) {
+ pr_err("Failed to register IOMMU context driver\n");
+ goto error;
+ }
+
+error:
+ return ret;
+}
+
+static void msm_iommu_driver_exit(void)
+{
+ platform_driver_unregister(&msm_iommu_ctx_driver);
+ platform_driver_unregister(&msm_iommu_driver);
+}
+
+subsys_initcall(msm_iommu_driver_init);
+module_exit(msm_iommu_driver_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Stepan Moskovchenko <stepanm@codeaurora.org>");
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index dec5ca6..7689848 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -28,7 +28,6 @@
#ifndef MSM_DGT_BASE
#define MSM_DGT_BASE (MSM_GPT_BASE + 0x10)
#endif
-#define MSM_DGT_SHIFT (5)
#define TIMER_MATCH_VAL 0x0000
#define TIMER_COUNT_VAL 0x0004
@@ -36,12 +35,28 @@
#define TIMER_ENABLE_CLR_ON_MATCH_EN 2
#define TIMER_ENABLE_EN 1
#define TIMER_CLEAR 0x000C
-
+#define DGT_CLK_CTL 0x0034
+enum {
+ DGT_CLK_CTL_DIV_1 = 0,
+ DGT_CLK_CTL_DIV_2 = 1,
+ DGT_CLK_CTL_DIV_3 = 2,
+ DGT_CLK_CTL_DIV_4 = 3,
+};
#define CSR_PROTECTION 0x0020
#define CSR_PROTECTION_EN 1
#define GPT_HZ 32768
+
+#if defined(CONFIG_ARCH_QSD8X50)
+#define DGT_HZ (19200000 / 4) /* 19.2 MHz / 4 by default */
+#define MSM_DGT_SHIFT (0)
+#elif defined(CONFIG_ARCH_MSM7X30) || defined(CONFIG_ARCH_MSM8X60)
+#define DGT_HZ (24576000 / 4) /* 24.576 MHz (LPXO) / 4 by default */
+#define MSM_DGT_SHIFT (0)
+#else
#define DGT_HZ 19200000 /* 19.2 MHz or 600 KHz after shift */
+#define MSM_DGT_SHIFT (5)
+#endif
struct msm_clock {
struct clock_event_device clockevent;
@@ -170,6 +185,10 @@
int i;
int res;
+#ifdef CONFIG_ARCH_MSM8X60
+ writel(DGT_CLK_CTL_DIV_4, MSM_TMR_BASE + DGT_CLK_CTL);
+#endif
+
for (i = 0; i < ARRAY_SIZE(msm_clocks); i++) {
struct msm_clock *clock = &msm_clocks[i];
struct clock_event_device *ce = &clock->clockevent;
diff --git a/arch/arm/mach-mx25/Kconfig b/arch/arm/mach-mx25/Kconfig
index c71a7bc..aa57e35 100644
--- a/arch/arm/mach-mx25/Kconfig
+++ b/arch/arm/mach-mx25/Kconfig
@@ -12,6 +12,8 @@
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_FLEXCAN
+ select IMX_HAVE_PLATFORM_ESDHC
select MXC_ULPI if USB_ULPI
choice
@@ -20,8 +22,8 @@
default MACH_EUKREA_MBIMXSD25_BASEBOARD
config MACH_EUKREA_MBIMXSD25_BASEBOARD
- prompt "Eukrea MBIMXSD development board"
- bool
+ bool "Eukrea MBIMXSD development board"
+ select IMX_HAVE_PLATFORM_IMX_SSI
help
This adds board specific devices that can be found on Eukrea's
MBIMXSD evaluation board.
diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c
index 40c7cc4..2179713 100644
--- a/arch/arm/mach-mx25/clock.c
+++ b/arch/arm/mach-mx25/clock.c
@@ -139,6 +139,16 @@
return get_rate_per(7);
}
+static unsigned long get_rate_esdhc1(struct clk *clk)
+{
+ return get_rate_per(3);
+}
+
+static unsigned long get_rate_esdhc2(struct clk *clk)
+{
+ return get_rate_per(4);
+}
+
static unsigned long get_rate_csi(struct clk *clk)
{
return get_rate_per(0);
@@ -213,6 +223,12 @@
DEFINE_CLOCK(cspi1_clk, 0, CCM_CGCR1, 5, get_rate_ipg, NULL, NULL);
DEFINE_CLOCK(cspi2_clk, 0, CCM_CGCR1, 6, get_rate_ipg, NULL, NULL);
DEFINE_CLOCK(cspi3_clk, 0, CCM_CGCR1, 7, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(esdhc1_ahb_clk, 0, CCM_CGCR0, 21, get_rate_esdhc1, NULL, NULL);
+DEFINE_CLOCK(esdhc1_per_clk, 0, CCM_CGCR0, 3, get_rate_esdhc1, NULL,
+ &esdhc1_ahb_clk);
+DEFINE_CLOCK(esdhc2_ahb_clk, 0, CCM_CGCR0, 22, get_rate_esdhc2, NULL, NULL);
+DEFINE_CLOCK(esdhc2_per_clk, 0, CCM_CGCR0, 4, get_rate_esdhc2, NULL,
+ &esdhc2_ahb_clk);
DEFINE_CLOCK(fec_ahb_clk, 0, CCM_CGCR0, 23, NULL, NULL, NULL);
DEFINE_CLOCK(lcdc_ahb_clk, 0, CCM_CGCR0, 24, NULL, NULL, NULL);
DEFINE_CLOCK(lcdc_per_clk, 0, CCM_CGCR0, 7, NULL, NULL, &lcdc_ahb_clk);
@@ -238,6 +254,10 @@
DEFINE_CLOCK(wdt_clk, 0, CCM_CGCR2, 19, get_rate_ipg, NULL, NULL);
DEFINE_CLOCK(ssi1_clk, 0, CCM_CGCR2, 11, get_rate_ssi1, NULL, &ssi1_per_clk);
DEFINE_CLOCK(ssi2_clk, 1, CCM_CGCR2, 12, get_rate_ssi2, NULL, &ssi2_per_clk);
+DEFINE_CLOCK(esdhc1_clk, 0, CCM_CGCR1, 13, get_rate_esdhc1, NULL,
+ &esdhc1_per_clk);
+DEFINE_CLOCK(esdhc2_clk, 1, CCM_CGCR1, 14, get_rate_esdhc2, NULL,
+ &esdhc2_per_clk);
DEFINE_CLOCK(audmux_clk, 0, CCM_CGCR1, 0, NULL, NULL, NULL);
DEFINE_CLOCK(csi_clk, 0, CCM_CGCR1, 4, get_rate_csi, NULL, &csi_per_clk);
DEFINE_CLOCK(can1_clk, 0, CCM_CGCR1, 2, get_rate_ipg, NULL, NULL);
@@ -261,9 +281,9 @@
_REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
_REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
- _REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
- _REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
- _REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
+ _REGISTER_CLOCK("imx25-cspi.0", NULL, cspi1_clk)
+ _REGISTER_CLOCK("imx25-cspi.1", NULL, cspi2_clk)
+ _REGISTER_CLOCK("imx25-cspi.2", NULL, cspi3_clk)
_REGISTER_CLOCK("mxc_pwm.0", NULL, pwm1_clk)
_REGISTER_CLOCK("mxc_pwm.1", NULL, pwm2_clk)
_REGISTER_CLOCK("mxc_pwm.2", NULL, pwm3_clk)
@@ -279,6 +299,8 @@
_REGISTER_CLOCK("imx-wdt.0", NULL, wdt_clk)
_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
+ _REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk)
+ _REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk)
_REGISTER_CLOCK("mx2-camera.0", NULL, csi_clk)
_REGISTER_CLOCK(NULL, "audmux", audmux_clk)
_REGISTER_CLOCK("flexcan.0", NULL, can1_clk)
diff --git a/arch/arm/mach-mx25/devices-imx25.h b/arch/arm/mach-mx25/devices-imx25.h
index d86a7c3..733aaee 100644
--- a/arch/arm/mach-mx25/devices-imx25.h
+++ b/arch/arm/mach-mx25/devices-imx25.h
@@ -9,35 +9,47 @@
#include <mach/mx25.h>
#include <mach/devices-common.h>
+extern const struct imx_fec_data imx25_fec_data __initconst;
+#define imx25_add_fec(pdata) \
+ imx_add_fec(&imx25_fec_data, pdata)
+
#define imx25_add_flexcan0(pdata) \
imx_add_flexcan(0, MX25_CAN1_BASE_ADDR, SZ_16K, MX25_INT_CAN1, pdata)
#define imx25_add_flexcan1(pdata) \
imx_add_flexcan(1, MX25_CAN2_BASE_ADDR, SZ_16K, MX25_INT_CAN2, pdata)
-#define imx25_add_imx_i2c0(pdata) \
- imx_add_imx_i2c(0, MX25_I2C1_BASE_ADDR, SZ_16K, MX25_INT_I2C1, pdata)
-#define imx25_add_imx_i2c1(pdata) \
- imx_add_imx_i2c(1, MX25_I2C2_BASE_ADDR, SZ_16K, MX25_INT_I2C2, pdata)
-#define imx25_add_imx_i2c2(pdata) \
- imx_add_imx_i2c(2, MX25_I2C3_BASE_ADDR, SZ_16K, MX25_INT_I2C3, pdata)
+extern const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst;
+#define imx25_add_imx_i2c(id, pdata) \
+ imx_add_imx_i2c(&imx25_imx_i2c_data[id], pdata)
+#define imx25_add_imx_i2c0(pdata) imx25_add_imx_i2c(0, pdata)
+#define imx25_add_imx_i2c1(pdata) imx25_add_imx_i2c(1, pdata)
+#define imx25_add_imx_i2c2(pdata) imx25_add_imx_i2c(2, pdata)
-#define imx25_add_imx_uart0(pdata) \
- imx_add_imx_uart_1irq(0, MX25_UART1_BASE_ADDR, SZ_16K, MX25_INT_UART1, pdata)
-#define imx25_add_imx_uart1(pdata) \
- imx_add_imx_uart_1irq(1, MX25_UART2_BASE_ADDR, SZ_16K, MX25_INT_UART2, pdata)
-#define imx25_add_imx_uart2(pdata) \
- imx_add_imx_uart_1irq(2, MX25_UART3_BASE_ADDR, SZ_16K, MX25_INT_UART3, pdata)
-#define imx25_add_imx_uart3(pdata) \
- imx_add_imx_uart_1irq(3, MX25_UART4_BASE_ADDR, SZ_16K, MX25_INT_UART4, pdata)
-#define imx25_add_imx_uart4(pdata) \
- imx_add_imx_uart_1irq(4, MX25_UART5_BASE_ADDR, SZ_16K, MX25_INT_UART5, pdata)
+extern const struct imx_imx_ssi_data imx25_imx_ssi_data[] __initconst;
+#define imx25_add_imx_ssi(id, pdata) \
+ imx_add_imx_ssi(&imx25_imx_ssi_data[id], pdata)
+extern const struct imx_imx_uart_1irq_data imx25_imx_uart_data[] __initconst;
+#define imx25_add_imx_uart(id, pdata) \
+ imx_add_imx_uart_1irq(&imx25_imx_uart_data[id], pdata)
+#define imx25_add_imx_uart0(pdata) imx25_add_imx_uart(0, pdata)
+#define imx25_add_imx_uart1(pdata) imx25_add_imx_uart(1, pdata)
+#define imx25_add_imx_uart2(pdata) imx25_add_imx_uart(2, pdata)
+#define imx25_add_imx_uart3(pdata) imx25_add_imx_uart(3, pdata)
+#define imx25_add_imx_uart4(pdata) imx25_add_imx_uart(4, pdata)
+
+extern const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst;
#define imx25_add_mxc_nand(pdata) \
- imx_add_mxc_nand_v21(MX25_NFC_BASE_ADDR, MX25_INT_NANDFC, pdata)
+ imx_add_mxc_nand(&imx25_mxc_nand_data, pdata)
-#define imx25_add_spi_imx0(pdata) \
- imx_add_spi_imx(0, MX25_CSPI1_BASE_ADDR, SZ_16K, MX25_INT_CSPI1, pdata)
-#define imx25_add_spi_imx1(pdata) \
- imx_add_spi_imx(1, MX25_CSPI2_BASE_ADDR, SZ_16K, MX25_INT_CSPI2, pdata)
-#define imx25_add_spi_imx2(pdata) \
- imx_add_spi_imx(2, MX25_CSPI3_BASE_ADDR, SZ_16K, MX25_INT_CSPI3, pdata)
+extern const struct imx_spi_imx_data imx25_spi_imx_data[] __initconst;
+#define imx25_add_spi_imx(id, pdata) \
+ imx_add_spi_imx(&imx25_spi_imx_data[id], pdata)
+#define imx25_add_spi_imx0(pdata) imx25_add_spi_imx(0, pdata)
+#define imx25_add_spi_imx1(pdata) imx25_add_spi_imx(1, pdata)
+#define imx25_add_spi_imx2(pdata) imx25_add_spi_imx(2, pdata)
+
+#define imx25_add_esdhc0(pdata) \
+ imx_add_esdhc(0, MX25_ESDHC1_BASE_ADDR, SZ_16K, MX25_INT_MMC_SDHC1, pdata)
+#define imx25_add_esdhc1(pdata) \
+ imx_add_esdhc(1, MX25_ESDHC2_BASE_ADDR, SZ_16K, MX25_INT_MMC_SDHC2, pdata)
diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c
index 3468eb1..1d0eb3e 100644
--- a/arch/arm/mach-mx25/devices.c
+++ b/arch/arm/mach-mx25/devices.c
@@ -208,26 +208,6 @@
return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
}
-static struct resource mx25_fec_resources[] = {
- {
- .start = MX25_FEC_BASE_ADDR,
- .end = MX25_FEC_BASE_ADDR + 0xfff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = MX25_INT_FEC,
- .end = MX25_INT_FEC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mx25_fec_device = {
- .name = "fec",
- .id = 0,
- .num_resources = ARRAY_SIZE(mx25_fec_resources),
- .resource = mx25_fec_resources,
-};
-
static struct resource mx25_rtc_resources[] = {
{
.start = MX25_DRYICE_BASE_ADDR,
@@ -305,44 +285,6 @@
.resource = mx25_kpp_resources,
};
-static struct resource imx_ssi_resources0[] = {
- {
- .start = MX25_SSI1_BASE_ADDR,
- .end = MX25_SSI1_BASE_ADDR + 0x3fff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX25_INT_SSI1,
- .end = MX25_INT_SSI1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource imx_ssi_resources1[] = {
- {
- .start = MX25_SSI2_BASE_ADDR,
- .end = MX25_SSI2_BASE_ADDR + 0x3fff,
- .flags = IORESOURCE_MEM
- }, {
- .start = MX25_INT_SSI2,
- .end = MX25_INT_SSI2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device imx_ssi_device0 = {
- .name = "imx-ssi",
- .id = 0,
- .num_resources = ARRAY_SIZE(imx_ssi_resources0),
- .resource = imx_ssi_resources0,
-};
-
-struct platform_device imx_ssi_device1 = {
- .name = "imx-ssi",
- .id = 1,
- .num_resources = ARRAY_SIZE(imx_ssi_resources1),
- .resource = imx_ssi_resources1,
-};
-
static struct resource mx25_csi_resources[] = {
{
.start = MX25_CSI_BASE_ADDR,
diff --git a/arch/arm/mach-mx25/devices.h b/arch/arm/mach-mx25/devices.h
index 4aceb68..7b70a43 100644
--- a/arch/arm/mach-mx25/devices.h
+++ b/arch/arm/mach-mx25/devices.h
@@ -6,11 +6,8 @@
extern struct platform_device mxc_pwm_device2;
extern struct platform_device mxc_pwm_device3;
extern struct platform_device mxc_keypad_device;
-extern struct platform_device mx25_fec_device;
extern struct platform_device mx25_rtc_device;
extern struct platform_device mx25_fb_device;
extern struct platform_device mxc_wdt;
extern struct platform_device mx25_kpp_device;
-extern struct platform_device imx_ssi_device0;
-extern struct platform_device imx_ssi_device1;
extern struct platform_device mx25_csi_device;
diff --git a/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c
index 4aaadc7..c1fe048 100644
--- a/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c
@@ -34,7 +34,6 @@
#include <mach/mx25.h>
#include <mach/imx-uart.h>
#include <mach/imxfb.h>
-#include <mach/ssi.h>
#include <mach/audmux.h>
#include "devices-imx25.h"
@@ -90,6 +89,9 @@
MX25_PAD_KPP_COL2__AUD5_TXC,
MX25_PAD_KPP_COL1__AUD5_RXD,
MX25_PAD_KPP_COL0__AUD5_TXD,
+ /* CAN */
+ MX25_PAD_GPIO_D__CAN2_RX,
+ MX25_PAD_GPIO_C__CAN2_TX,
};
#define GPIO_LED1 83
@@ -205,7 +207,8 @@
},
};
-struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata = {
+static const
+struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = {
.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
};
@@ -239,7 +242,10 @@
imx25_add_imx_uart1(&uart_pdata);
mxc_register_device(&mx25_fb_device, &eukrea_mximxsd_fb_pdata);
- mxc_register_device(&imx_ssi_device0, &eukrea_mbimxsd_ssi_pdata);
+ imx25_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
+
+ imx25_add_flexcan1(NULL);
+ imx25_add_esdhc0(NULL);
gpio_request(GPIO_LED1, "LED1");
gpio_direction_output(GPIO_LED1, 1);
diff --git a/arch/arm/mach-mx25/mach-cpuimx25.c b/arch/arm/mach-mx25/mach-cpuimx25.c
index e064bb3..21d9b9e 100644
--- a/arch/arm/mach-mx25/mach-cpuimx25.c
+++ b/arch/arm/mach-mx25/mach-cpuimx25.c
@@ -23,7 +23,6 @@
#include <linux/clk.h>
#include <linux/irq.h>
#include <linux/gpio.h>
-#include <linux/fec.h>
#include <linux/platform_device.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
@@ -67,7 +66,7 @@
MX25_PAD_I2C1_DAT__I2C1_DAT,
};
-static struct fec_platform_data mx25_fec_pdata = {
+static const struct fec_platform_data mx25_fec_pdata __initconst = {
.phy = PHY_INTERFACE_MODE_RMII,
};
@@ -129,7 +128,7 @@
imx25_add_imx_uart0(&uart_pdata);
imx25_add_mxc_nand(&eukrea_cpuimx25_nand_board_info);
mxc_register_device(&mx25_rtc_device, NULL);
- mxc_register_device(&mx25_fec_device, &mx25_fec_pdata);
+ imx25_add_fec(&mx25_fec_pdata);
i2c_register_board_info(0, eukrea_cpuimx25_i2c_devices,
ARRAY_SIZE(eukrea_cpuimx25_i2c_devices));
diff --git a/arch/arm/mach-mx25/mach-mx25_3ds.c b/arch/arm/mach-mx25/mach-mx25_3ds.c
index 62bc21f..bd18056 100644
--- a/arch/arm/mach-mx25/mach-mx25_3ds.c
+++ b/arch/arm/mach-mx25/mach-mx25_3ds.c
@@ -28,7 +28,6 @@
#include <linux/clk.h>
#include <linux/irq.h>
#include <linux/gpio.h>
-#include <linux/fec.h>
#include <linux/platform_device.h>
#include <linux/input/matrix_keypad.h>
@@ -99,7 +98,7 @@
MX25_PAD_KPP_COL3__KPP_COL3,
};
-static struct fec_platform_data mx25_fec_pdata = {
+static const struct fec_platform_data mx25_fec_pdata __initconst = {
.phy = PHY_INTERFACE_MODE_RMII,
};
@@ -192,7 +191,7 @@
mxc_register_device(&mxc_wdt, NULL);
mx25pdk_fec_reset();
- mxc_register_device(&mx25_fec_device, &mx25_fec_pdata);
+ imx25_add_fec(&mx25_fec_pdata);
mxc_register_device(&mx25_kpp_device, &mx25pdk_keymap_data);
}
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index 85beece..096fd33 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -9,6 +9,7 @@
bool
select ARCH_MXC_IOMUX_V3
select ARCH_MXC_AUDMUX_V2
+ select HAVE_EPIT
comment "MX3 platforms:"
@@ -16,6 +17,7 @@
bool "Support MX31ADS platforms"
select ARCH_MX31
select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
default y
help
@@ -117,9 +119,11 @@
bool "Support Phytec pcm043 (i.MX35) platforms"
select ARCH_MX35
select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_FLEXCAN
+ select IMX_HAVE_PLATFORM_ESDHC
select MXC_ULPI if USB_ULPI
help
Include support for Phytec pcm043 platform. This includes
@@ -140,6 +144,7 @@
bool "Support MX35PDK platform"
select ARCH_MX35
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_NAND
default n
help
Include support for MX35PDK platform. This includes specific
@@ -159,6 +164,8 @@
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_FLEXCAN
+ select IMX_HAVE_PLATFORM_ESDHC
select MXC_ULPI if USB_ULPI
help
Include support for Eukrea CPUIMX35 platform. This includes
@@ -170,8 +177,8 @@
default MACH_EUKREA_MBIMXSD35_BASEBOARD
config MACH_EUKREA_MBIMXSD35_BASEBOARD
- prompt "Eukrea MBIMXSD development board"
- bool
+ bool "Eukrea MBIMXSD development board"
+ select IMX_HAVE_PLATFORM_IMX_SSI
help
This adds board specific devices that can be found on Eukrea's
MBIMXSD evaluation board.
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index 2bd7bec..8a182d0a 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -7,7 +7,6 @@
obj-y := mm.o devices.o cpu.o
CFLAGS_mm.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
CFLAGS_devices.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
-CFLAGS_cpu.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
obj-$(CONFIG_ARCH_MX31) += clock-imx31.o iomux-imx31.o
obj-$(CONFIG_ARCH_MX35) += clock-imx35.o
obj-$(CONFIG_MACH_MX31ADS) += mach-mx31ads.o
diff --git a/arch/arm/mach-mx3/clock-imx31.c b/arch/arm/mach-mx3/clock-imx31.c
index 9a9eb6d..109e98f 100644
--- a/arch/arm/mach-mx3/clock-imx31.c
+++ b/arch/arm/mach-mx3/clock-imx31.c
@@ -477,7 +477,7 @@
DEFINE_CLOCK(epit2_clk, 1, MXC_CCM_CGR0, 8, NULL, NULL, &perclk_clk);
DEFINE_CLOCK(iim_clk, 0, MXC_CCM_CGR0, 10, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(ata_clk, 0, MXC_CCM_CGR0, 12, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(sdma_clk1, 0, MXC_CCM_CGR0, 14, NULL, &sdma_clk1, &ahb_clk);
+DEFINE_CLOCK(sdma_clk1, 0, MXC_CCM_CGR0, 14, NULL, NULL, &ahb_clk);
DEFINE_CLOCK(cspi3_clk, 2, MXC_CCM_CGR0, 16, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(rng_clk, 0, MXC_CCM_CGR0, 18, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CGR0, 20, NULL, NULL, &perclk_clk);
@@ -525,9 +525,9 @@
static struct clk_lookup lookups[] = {
_REGISTER_CLOCK(NULL, "emi", emi_clk)
- _REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
- _REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
- _REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
+ _REGISTER_CLOCK("imx31-cspi.0", NULL, cspi1_clk)
+ _REGISTER_CLOCK("imx31-cspi.1", NULL, cspi2_clk)
+ _REGISTER_CLOCK("imx31-cspi.2", NULL, cspi3_clk)
_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
_REGISTER_CLOCK(NULL, "pwm", pwm_clk)
_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
@@ -564,7 +564,7 @@
_REGISTER_CLOCK(NULL, "ata", ata_clk)
_REGISTER_CLOCK(NULL, "rtic", rtic_clk)
_REGISTER_CLOCK(NULL, "rng", rng_clk)
- _REGISTER_CLOCK(NULL, "sdma_ahb", sdma_clk1)
+ _REGISTER_CLOCK("imx-sdma", NULL, sdma_clk1)
_REGISTER_CLOCK(NULL, "sdma_ipg", sdma_clk2)
_REGISTER_CLOCK(NULL, "mstick", mstick1_clk)
_REGISTER_CLOCK(NULL, "mstick", mstick2_clk)
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index 7a62e74..61e4a31 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -364,8 +364,8 @@
DEFINE_CLOCK(ect_clk, 0, CCM_CGR0, 14, get_rate_ipg, NULL);
DEFINE_CLOCK(edio_clk, 0, CCM_CGR0, 16, NULL, NULL);
DEFINE_CLOCK(emi_clk, 0, CCM_CGR0, 18, get_rate_ipg, NULL);
-DEFINE_CLOCK(epit1_clk, 0, CCM_CGR0, 20, get_rate_ipg_per, NULL);
-DEFINE_CLOCK(epit2_clk, 1, CCM_CGR0, 22, get_rate_ipg_per, NULL);
+DEFINE_CLOCK(epit1_clk, 0, CCM_CGR0, 20, get_rate_ipg, NULL);
+DEFINE_CLOCK(epit2_clk, 1, CCM_CGR0, 22, get_rate_ipg, NULL);
DEFINE_CLOCK(esai_clk, 0, CCM_CGR0, 24, NULL, NULL);
DEFINE_CLOCK(esdhc1_clk, 0, CCM_CGR0, 26, get_rate_sdhc, NULL);
DEFINE_CLOCK(esdhc2_clk, 1, CCM_CGR0, 28, get_rate_sdhc, NULL);
@@ -451,17 +451,17 @@
_REGISTER_CLOCK(NULL, "ata", ata_clk)
_REGISTER_CLOCK("flexcan.0", NULL, can1_clk)
_REGISTER_CLOCK("flexcan.1", NULL, can2_clk)
- _REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
- _REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
+ _REGISTER_CLOCK("imx35-cspi.0", NULL, cspi1_clk)
+ _REGISTER_CLOCK("imx35-cspi.1", NULL, cspi2_clk)
_REGISTER_CLOCK(NULL, "ect", ect_clk)
_REGISTER_CLOCK(NULL, "edio", edio_clk)
_REGISTER_CLOCK(NULL, "emi", emi_clk)
- _REGISTER_CLOCK(NULL, "epit", epit1_clk)
- _REGISTER_CLOCK(NULL, "epit", epit2_clk)
+ _REGISTER_CLOCK("imx-epit.0", NULL, epit1_clk)
+ _REGISTER_CLOCK("imx-epit.1", NULL, epit2_clk)
_REGISTER_CLOCK(NULL, "esai", esai_clk)
- _REGISTER_CLOCK(NULL, "sdhc", esdhc1_clk)
- _REGISTER_CLOCK(NULL, "sdhc", esdhc2_clk)
- _REGISTER_CLOCK(NULL, "sdhc", esdhc3_clk)
+ _REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk)
+ _REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk)
+ _REGISTER_CLOCK("sdhci-esdhc-imx.2", NULL, esdhc3_clk)
_REGISTER_CLOCK("fec.0", NULL, fec_clk)
_REGISTER_CLOCK(NULL, "gpio", gpio1_clk)
_REGISTER_CLOCK(NULL, "gpio", gpio2_clk)
@@ -482,7 +482,7 @@
_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
_REGISTER_CLOCK(NULL, "rtic", rtic_clk)
_REGISTER_CLOCK(NULL, "scc", scc_clk)
- _REGISTER_CLOCK(NULL, "sdma", sdma_clk)
+ _REGISTER_CLOCK("imx-sdma", NULL, sdma_clk)
_REGISTER_CLOCK(NULL, "spba", spba_clk)
_REGISTER_CLOCK(NULL, "spdif", spdif_clk)
_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
@@ -535,8 +535,16 @@
__raw_writel(cgr2, CCM_BASE + CCM_CGR2);
__raw_writel(cgr3, CCM_BASE + CCM_CGR3);
+ clk_enable(&iim_clk);
+ mx35_read_cpu_rev();
+
+#ifdef CONFIG_MXC_USE_EPIT
+ epit_timer_init(&epit1_clk,
+ MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1);
+#else
mxc_timer_init(&gpt_clk,
MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT);
+#endif
return 0;
}
diff --git a/arch/arm/mach-mx3/cpu.c b/arch/arm/mach-mx3/cpu.c
index 861afe0..d00a754 100644
--- a/arch/arm/mach-mx3/cpu.c
+++ b/arch/arm/mach-mx3/cpu.c
@@ -25,15 +25,15 @@
};
static struct mx3_cpu_type mx31_cpu_type[] __initdata = {
- { .srev = 0x00, .name = "i.MX31(L)", .v = "1.0", .rev = CHIP_REV_1_0 },
- { .srev = 0x10, .name = "i.MX31", .v = "1.1", .rev = CHIP_REV_1_1 },
- { .srev = 0x11, .name = "i.MX31L", .v = "1.1", .rev = CHIP_REV_1_1 },
- { .srev = 0x12, .name = "i.MX31", .v = "1.15", .rev = CHIP_REV_1_1 },
- { .srev = 0x13, .name = "i.MX31L", .v = "1.15", .rev = CHIP_REV_1_1 },
- { .srev = 0x14, .name = "i.MX31", .v = "1.2", .rev = CHIP_REV_1_2 },
- { .srev = 0x15, .name = "i.MX31L", .v = "1.2", .rev = CHIP_REV_1_2 },
- { .srev = 0x28, .name = "i.MX31", .v = "2.0", .rev = CHIP_REV_2_0 },
- { .srev = 0x29, .name = "i.MX31L", .v = "2.0", .rev = CHIP_REV_2_0 },
+ { .srev = 0x00, .name = "i.MX31(L)", .v = "1.0", .rev = MX3x_CHIP_REV_1_0 },
+ { .srev = 0x10, .name = "i.MX31", .v = "1.1", .rev = MX3x_CHIP_REV_1_1 },
+ { .srev = 0x11, .name = "i.MX31L", .v = "1.1", .rev = MX3x_CHIP_REV_1_1 },
+ { .srev = 0x12, .name = "i.MX31", .v = "1.15", .rev = MX3x_CHIP_REV_1_1 },
+ { .srev = 0x13, .name = "i.MX31L", .v = "1.15", .rev = MX3x_CHIP_REV_1_1 },
+ { .srev = 0x14, .name = "i.MX31", .v = "1.2", .rev = MX3x_CHIP_REV_1_2 },
+ { .srev = 0x15, .name = "i.MX31L", .v = "1.2", .rev = MX3x_CHIP_REV_1_2 },
+ { .srev = 0x28, .name = "i.MX31", .v = "2.0", .rev = MX3x_CHIP_REV_2_0 },
+ { .srev = 0x29, .name = "i.MX31L", .v = "2.0", .rev = MX3x_CHIP_REV_2_0 },
};
void __init mx31_read_cpu_rev(void)
@@ -41,7 +41,7 @@
u32 i, srev;
/* read SREV register from IIM module */
- srev = __raw_readl(IO_ADDRESS(IIM_BASE_ADDR + MXC_IIMSREV));
+ srev = __raw_readl(MX31_IO_ADDRESS(MX31_IIM_BASE_ADDR + MXC_IIMSREV));
for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
if (srev == mx31_cpu_type[i].srev) {
@@ -55,3 +55,30 @@
printk(KERN_WARNING "Unknown CPU identifier. srev = %02x\n", srev);
}
+
+unsigned int mx35_cpu_rev;
+EXPORT_SYMBOL(mx35_cpu_rev);
+
+void __init mx35_read_cpu_rev(void)
+{
+ u32 rev;
+ char *srev = "unknown";
+
+ rev = __raw_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV));
+ switch (rev) {
+ case 0x00:
+ mx35_cpu_rev = MX3x_CHIP_REV_1_0;
+ srev = "1.0";
+ break;
+ case 0x10:
+ mx35_cpu_rev = MX3x_CHIP_REV_2_0;
+ srev = "2.0";
+ break;
+ case 0x11:
+ mx35_cpu_rev = MX3x_CHIP_REV_2_1;
+ srev = "2.1";
+ break;
+ }
+
+ printk(KERN_INFO "CPU identified as i.MX35, silicon rev %s\n", srev);
+}
diff --git a/arch/arm/mach-mx3/devices-imx31.h b/arch/arm/mach-mx3/devices-imx31.h
index 3b1a44a..de95985 100644
--- a/arch/arm/mach-mx3/devices-imx31.h
+++ b/arch/arm/mach-mx3/devices-imx31.h
@@ -9,30 +9,33 @@
#include <mach/mx31.h>
#include <mach/devices-common.h>
-#define imx31_add_imx_i2c0(pdata) \
- imx_add_imx_i2c(0, MX31_I2C1_BASE_ADDR, SZ_4K, MX31_INT_I2C1, pdata)
-#define imx31_add_imx_i2c1(pdata) \
- imx_add_imx_i2c(1, MX31_I2C2_BASE_ADDR, SZ_4K, MX31_INT_I2C2, pdata)
-#define imx31_add_imx_i2c2(pdata) \
- imx_add_imx_i2c(2, MX31_I2C3_BASE_ADDR, SZ_4K, MX31_INT_I2C3, pdata)
+extern const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst;
+#define imx31_add_imx_i2c(id, pdata) \
+ imx_add_imx_i2c(&imx31_imx_i2c_data[id], pdata)
+#define imx31_add_imx_i2c0(pdata) imx31_add_imx_i2c(0, pdata)
+#define imx31_add_imx_i2c1(pdata) imx31_add_imx_i2c(1, pdata)
+#define imx31_add_imx_i2c2(pdata) imx31_add_imx_i2c(2, pdata)
-#define imx31_add_imx_uart0(pdata) \
- imx_add_imx_uart_1irq(0, MX31_UART1_BASE_ADDR, SZ_16K, MX31_INT_UART1, pdata)
-#define imx31_add_imx_uart1(pdata) \
- imx_add_imx_uart_1irq(1, MX31_UART2_BASE_ADDR, SZ_16K, MX31_INT_UART2, pdata)
-#define imx31_add_imx_uart2(pdata) \
- imx_add_imx_uart_1irq(2, MX31_UART3_BASE_ADDR, SZ_16K, MX31_INT_UART3, pdata)
-#define imx31_add_imx_uart3(pdata) \
- imx_add_imx_uart_1irq(3, MX31_UART4_BASE_ADDR, SZ_16K, MX31_INT_UART4, pdata)
-#define imx31_add_imx_uart4(pdata) \
- imx_add_imx_uart_1irq(4, MX31_UART5_BASE_ADDR, SZ_16K, MX31_INT_UART5, pdata)
+extern const struct imx_imx_ssi_data imx31_imx_ssi_data[] __initconst;
+#define imx31_add_imx_ssi(id, pdata) \
+ imx_add_imx_ssi(&imx31_imx_ssi_data[id], pdata)
+extern const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst;
+#define imx31_add_imx_uart(id, pdata) \
+ imx_add_imx_uart_1irq(&imx31_imx_uart_data[id], pdata)
+#define imx31_add_imx_uart0(pdata) imx31_add_imx_uart(0, pdata)
+#define imx31_add_imx_uart1(pdata) imx31_add_imx_uart(1, pdata)
+#define imx31_add_imx_uart2(pdata) imx31_add_imx_uart(2, pdata)
+#define imx31_add_imx_uart3(pdata) imx31_add_imx_uart(3, pdata)
+#define imx31_add_imx_uart4(pdata) imx31_add_imx_uart(4, pdata)
+
+extern const struct imx_mxc_nand_data imx31_mxc_nand_data __initconst;
#define imx31_add_mxc_nand(pdata) \
- imx_add_mxc_nand_v1(MX31_NFC_BASE_ADDR, MX31_INT_NANDFC, pdata)
+ imx_add_mxc_nand(&imx31_mxc_nand_data, pdata)
-#define imx31_add_spi_imx0(pdata) \
- imx_add_spi_imx(0, MX31_CSPI1_BASE_ADDR, SZ_4K, MX31_INT_CSPI1, pdata)
-#define imx31_add_spi_imx1(pdata) \
- imx_add_spi_imx(1, MX31_CSPI2_BASE_ADDR, SZ_4K, MX31_INT_CSPI2, pdata)
-#define imx31_add_spi_imx2(pdata) \
- imx_add_spi_imx(2, MX31_CSPI3_BASE_ADDR, SZ_4K, MX31_INT_CSPI3, pdata)
+extern const struct imx_spi_imx_data imx31_cspi_data[] __initconst;
+#define imx31_add_cspi(id, pdata) \
+ imx_add_spi_imx(&imx31_cspi_data[id], pdata)
+#define imx31_add_spi_imx0(pdata) imx31_add_cspi(0, pdata)
+#define imx31_add_spi_imx1(pdata) imx31_add_cspi(1, pdata)
+#define imx31_add_spi_imx2(pdata) imx31_add_cspi(2, pdata)
diff --git a/arch/arm/mach-mx3/devices-imx35.h b/arch/arm/mach-mx3/devices-imx35.h
index f6a431a..509b346 100644
--- a/arch/arm/mach-mx3/devices-imx35.h
+++ b/arch/arm/mach-mx3/devices-imx35.h
@@ -9,29 +9,46 @@
#include <mach/mx35.h>
#include <mach/devices-common.h>
+extern const struct imx_fec_data imx35_fec_data __initconst;
+#define imx35_add_fec(pdata) \
+ imx_add_fec(&imx35_fec_data, pdata)
+
#define imx35_add_flexcan0(pdata) \
imx_add_flexcan(0, MX35_CAN1_BASE_ADDR, SZ_16K, MX35_INT_CAN1, pdata)
#define imx35_add_flexcan1(pdata) \
imx_add_flexcan(1, MX35_CAN2_BASE_ADDR, SZ_16K, MX35_INT_CAN2, pdata)
-#define imx35_add_imx_i2c0(pdata) \
- imx_add_imx_i2c(0, MX35_I2C1_BASE_ADDR, SZ_4K, MX35_INT_I2C1, pdata)
-#define imx35_add_imx_i2c1(pdata) \
- imx_add_imx_i2c(1, MX35_I2C2_BASE_ADDR, SZ_4K, MX35_INT_I2C2, pdata)
-#define imx35_add_imx_i2c2(pdata) \
- imx_add_imx_i2c(2, MX35_I2C3_BASE_ADDR, SZ_4K, MX35_INT_I2C3, pdata)
+extern const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst;
+#define imx35_add_imx_i2c(id, pdata) \
+ imx_add_imx_i2c(&imx35_imx_i2c_data[id], pdata)
+#define imx35_add_imx_i2c0(pdata) imx35_add_imx_i2c(0, pdata)
+#define imx35_add_imx_i2c1(pdata) imx35_add_imx_i2c(1, pdata)
+#define imx35_add_imx_i2c2(pdata) imx35_add_imx_i2c(2, pdata)
-#define imx35_add_imx_uart0(pdata) \
- imx_add_imx_uart_1irq(0, MX35_UART1_BASE_ADDR, SZ_16K, MX35_INT_UART1, pdata)
-#define imx35_add_imx_uart1(pdata) \
- imx_add_imx_uart_1irq(1, MX35_UART2_BASE_ADDR, SZ_16K, MX35_INT_UART2, pdata)
-#define imx35_add_imx_uart2(pdata) \
- imx_add_imx_uart_1irq(2, MX35_UART3_BASE_ADDR, SZ_16K, MX35_INT_UART3, pdata)
+extern const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst;
+#define imx35_add_imx_ssi(id, pdata) \
+ imx_add_imx_ssi(&imx35_imx_ssi_data[id], pdata)
+extern const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst;
+#define imx35_add_imx_uart(id, pdata) \
+ imx_add_imx_uart_1irq(&imx35_imx_uart_data[id], pdata)
+#define imx35_add_imx_uart0(pdata) imx35_add_imx_uart(0, pdata)
+#define imx35_add_imx_uart1(pdata) imx35_add_imx_uart(1, pdata)
+#define imx35_add_imx_uart2(pdata) imx35_add_imx_uart(2, pdata)
+
+extern const struct imx_mxc_nand_data imx35_mxc_nand_data __initconst;
#define imx35_add_mxc_nand(pdata) \
- imx_add_mxc_nand_v21(MX35_NFC_BASE_ADDR, MX35_INT_NANDFC, pdata)
+ imx_add_mxc_nand(&imx35_mxc_nand_data, pdata)
-#define imx35_add_spi_imx0(pdata) \
- imx_add_spi_imx(0, MX35_CSPI1_BASE_ADDR, SZ_4K, MX35_INT_CSPI1, pdata)
-#define imx35_add_spi_imx1(pdata) \
- imx_add_spi_imx(1, MX35_CSPI2_BASE_ADDR, SZ_4K, MX35_INT_CSPI2, pdata)
+extern const struct imx_spi_imx_data imx35_cspi_data[] __initconst;
+#define imx35_add_cspi(id, pdata) \
+ imx_add_spi_imx(&imx35_cspi_data[id], pdata)
+#define imx35_add_spi_imx0(pdata) imx35_add_cspi(0, pdata)
+#define imx35_add_spi_imx1(pdata) imx35_add_cspi(1, pdata)
+
+#define imx35_add_esdhc0(pdata) \
+ imx_add_esdhc(0, MX35_ESDHC1_BASE_ADDR, SZ_16K, MX35_INT_MMC_SDHC1, pdata)
+#define imx35_add_esdhc1(pdata) \
+ imx_add_esdhc(1, MX35_ESDHC2_BASE_ADDR, SZ_16K, MX35_INT_MMC_SDHC2, pdata)
+#define imx35_add_esdhc2(pdata) \
+ imx_add_esdhc(2, MX35_ESDHC3_BASE_ADDR, SZ_16K, MX35_INT_MMC_SDHC3, pdata)
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index a4fd1a2..f4dff11 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -281,65 +281,6 @@
.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
};
-#if defined(CONFIG_ARCH_MX35)
-static struct resource mxc_fec_resources[] = {
- {
- .start = MXC_FEC_BASE_ADDR,
- .end = MXC_FEC_BASE_ADDR + 0xfff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MXC_INT_FEC,
- .end = MXC_INT_FEC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_fec_device = {
- .name = "fec",
- .id = 0,
- .num_resources = ARRAY_SIZE(mxc_fec_resources),
- .resource = mxc_fec_resources,
-};
-#endif
-
-static struct resource imx_ssi_resources0[] = {
- {
- .start = SSI1_BASE_ADDR,
- .end = SSI1_BASE_ADDR + 0xfff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX31_INT_SSI1,
- .end = MX31_INT_SSI1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource imx_ssi_resources1[] = {
- {
- .start = SSI2_BASE_ADDR,
- .end = SSI2_BASE_ADDR + 0xfff,
- .flags = IORESOURCE_MEM
- }, {
- .start = MX31_INT_SSI2,
- .end = MX31_INT_SSI2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device imx_ssi_device0 = {
- .name = "imx-ssi",
- .id = 0,
- .num_resources = ARRAY_SIZE(imx_ssi_resources0),
- .resource = imx_ssi_resources0,
-};
-
-struct platform_device imx_ssi_device1 = {
- .name = "imx-ssi",
- .id = 1,
- .num_resources = ARRAY_SIZE(imx_ssi_resources1),
- .resource = imx_ssi_resources1,
-};
-
static struct resource imx_wdt_resources[] = {
{
.flags = IORESOURCE_MEM,
@@ -410,10 +351,6 @@
mxc_usbh1_resources[0].end = MX35_OTG_BASE_ADDR + 0x5ff;
mxc_usbh1_resources[1].start = MXC_INT_USBHS;
mxc_usbh1_resources[1].end = MXC_INT_USBHS;
- imx_ssi_resources0[1].start = MX35_INT_SSI1;
- imx_ssi_resources0[1].end = MX35_INT_SSI1;
- imx_ssi_resources1[1].start = MX35_INT_SSI2;
- imx_ssi_resources1[1].end = MX35_INT_SSI2;
imx_wdt_resources[0].start = MX35_WDOG_BASE_ADDR;
imx_wdt_resources[0].end = MX35_WDOG_BASE_ADDR + 0x3fff;
}
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index e553523..585f814 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -2,7 +2,6 @@
extern struct platform_device mx3_ipu;
extern struct platform_device mx3_fb;
extern struct platform_device mx3_camera;
-extern struct platform_device mxc_fec_device;
extern struct platform_device mxcsdhc_device0;
extern struct platform_device mxcsdhc_device1;
extern struct platform_device mxc_otg_udc_device;
@@ -10,9 +9,6 @@
extern struct platform_device mxc_usbh1;
extern struct platform_device mxc_usbh2;
extern struct platform_device mxc_rnga_device;
-extern struct platform_device imx_ssi_device0;
-extern struct platform_device imx_ssi_device1;
-extern struct platform_device imx_ssi_device1;
extern struct platform_device imx_wdt_device0;
extern struct platform_device imx_rtc_device0;
extern struct platform_device imx_kpp_device;
diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
index f8f15e3..8869599 100644
--- a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
@@ -43,7 +43,6 @@
#include <mach/ipu.h>
#include <mach/mx3fb.h>
#include <mach/audmux.h>
-#include <mach/ssi.h>
#include "devices-imx35.h"
#include "devices.h"
@@ -120,6 +119,16 @@
MX35_PAD_STXD4__AUDMUX_AUD4_TXD,
MX35_PAD_SRXD4__AUDMUX_AUD4_RXD,
MX35_PAD_SCK4__AUDMUX_AUD4_TXC,
+ /* CAN2 */
+ MX35_PAD_TX5_RX0__CAN2_TXCAN,
+ MX35_PAD_TX4_RX1__CAN2_RXCAN,
+ /* SDCARD */
+ MX35_PAD_SD1_CMD__ESDHC1_CMD,
+ MX35_PAD_SD1_CLK__ESDHC1_CLK,
+ MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
+ MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
+ MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
+ MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
};
#define GPIO_LED1 (2 * 32 + 29)
@@ -206,7 +215,8 @@
},
};
-struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata = {
+static const
+struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = {
.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
};
@@ -242,7 +252,10 @@
mxc_register_device(&mx3_ipu, &mx3_ipu_data);
mxc_register_device(&mx3_fb, &mx3fb_pdata);
- mxc_register_device(&imx_ssi_device0, &eukrea_mbimxsd_ssi_pdata);
+ imx35_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
+
+ imx35_add_flexcan1(NULL);
+ imx35_add_esdhc0(NULL);
gpio_request(GPIO_LED1, "LED1");
gpio_direction_output(GPIO_LED1, 1);
diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c
index 2a4f8b7..6024bb9 100644
--- a/arch/arm/mach-mx3/mach-cpuimx35.c
+++ b/arch/arm/mach-mx3/mach-cpuimx35.c
@@ -31,6 +31,7 @@
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <linux/fsl_devices.h>
+#include <linux/i2c-gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -53,39 +54,16 @@
};
static const struct imxi2c_platform_data
-eukrea_cpuimx35_i2c0_data __initconst = {
- .bitrate = 50000,
+ eukrea_cpuimx35_i2c0_data __initconst = {
+ .bitrate = 100000,
};
-#define TSC2007_IRQGPIO (2 * 32 + 2)
-static int ts_get_pendown_state(void)
-{
- int val = 0;
- gpio_free(TSC2007_IRQGPIO);
- gpio_request(TSC2007_IRQGPIO, NULL);
- gpio_direction_input(TSC2007_IRQGPIO);
-
- val = gpio_get_value(TSC2007_IRQGPIO);
-
- gpio_free(TSC2007_IRQGPIO);
- gpio_request(TSC2007_IRQGPIO, NULL);
-
- return val ? 0 : 1;
-}
-
-static int ts_init(void)
-{
- gpio_request(TSC2007_IRQGPIO, NULL);
- return 0;
-}
-
static struct tsc2007_platform_data tsc2007_info = {
.model = 2007,
.x_plate_ohms = 180,
- .get_pendown_state = ts_get_pendown_state,
- .init_platform_hw = ts_init,
};
+#define TSC2007_IRQGPIO (2 * 32 + 2)
static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = {
{
I2C_BOARD_INFO("pcf8563", 0x51),
@@ -98,7 +76,6 @@
};
static struct platform_device *devices[] __initdata = {
- &mxc_fec_device,
&imx_wdt_device0,
};
@@ -135,18 +112,18 @@
};
static const struct mxc_nand_platform_data
-eukrea_cpuimx35_nand_board_info __initconst = {
+ eukrea_cpuimx35_nand_board_info __initconst = {
.width = 1,
.hw_ecc = 1,
.flash_bbt = 1,
};
-static struct mxc_usbh_platform_data otg_pdata = {
+static struct mxc_usbh_platform_data __maybe_unused otg_pdata = {
.portsc = MXC_EHCI_MODE_UTMI,
.flags = MXC_EHCI_INTERFACE_DIFF_UNI,
};
-static struct mxc_usbh_platform_data usbh1_pdata = {
+static struct mxc_usbh_platform_data __maybe_unused usbh1_pdata = {
.portsc = MXC_EHCI_MODE_SERIAL,
.flags = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
MXC_EHCI_IPPUE_DOWN,
@@ -180,6 +157,7 @@
mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx35_pads,
ARRAY_SIZE(eukrea_cpuimx35_pads));
+ imx35_add_fec(NULL);
platform_add_devices(devices, ARRAY_SIZE(devices));
imx35_add_imx_uart0(&uart_pdata);
diff --git a/arch/arm/mach-mx3/mach-mx31ads.c b/arch/arm/mach-mx3/mach-mx31ads.c
index 94b3e7c..96cedc4 100644
--- a/arch/arm/mach-mx3/mach-mx31ads.c
+++ b/arch/arm/mach-mx3/mach-mx31ads.c
@@ -517,7 +517,7 @@
static void mxc_init_audio(void)
{
- mxc_register_device(&imx_ssi_device0, NULL);
+ imx31_add_imx_ssi(0, NULL);
mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi");
}
diff --git a/arch/arm/mach-mx3/mach-mx35_3ds.c b/arch/arm/mach-mx3/mach-mx35_3ds.c
index 1c30d72..91bb065 100644
--- a/arch/arm/mach-mx3/mach-mx35_3ds.c
+++ b/arch/arm/mach-mx3/mach-mx35_3ds.c
@@ -1,5 +1,6 @@
/*
* Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2009 Marc Kleine-Budde, Pengutronix
*
* Author: Fabio Estevam <fabio.estevam@freescale.com>
*
@@ -27,6 +28,8 @@
#include <linux/gpio.h>
#include <linux/fsl_devices.h>
+#include <linux/mtd/physmap.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
@@ -35,6 +38,7 @@
#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/iomux-mx35.h>
+#include <mach/mxc_ehci.h>
#include "devices-imx35.h"
#include "devices.h"
@@ -43,8 +47,34 @@
.flags = IMXUART_HAVE_RTSCTS,
};
+static struct physmap_flash_data mx35pdk_flash_data = {
+ .width = 2,
+};
+
+static struct resource mx35pdk_flash_resource = {
+ .start = MX35_CS0_BASE_ADDR,
+ .end = MX35_CS0_BASE_ADDR + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device mx35pdk_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &mx35pdk_flash_data,
+ },
+ .resource = &mx35pdk_flash_resource,
+ .num_resources = 1,
+};
+
+static const struct mxc_nand_platform_data mx35pdk_nand_board_info __initconst = {
+ .width = 1,
+ .hw_ecc = 1,
+ .flash_bbt = 1,
+};
+
static struct platform_device *devices[] __initdata = {
- &mxc_fec_device,
+ &mx35pdk_flash,
};
static struct pad_desc mx35pdk_pads[] = {
@@ -75,14 +105,24 @@
/* USBOTG */
MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR,
MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC,
+ /* USBH1 */
+ MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR,
+ MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC,
};
/* OTG config */
-static struct fsl_usb2_platform_data usb_pdata = {
+static struct fsl_usb2_platform_data usb_otg_pdata = {
.operating_mode = FSL_USB2_DR_DEVICE,
.phy_mode = FSL_USB2_PHY_UTMI_WIDE,
};
+/* USB HOST config */
+static struct mxc_usbh_platform_data usb_host_pdata = {
+ .portsc = MXC_EHCI_MODE_SERIAL,
+ .flags = MXC_EHCI_INTERFACE_SINGLE_UNI |
+ MXC_EHCI_INTERNAL_PHY,
+};
+
/*
* Board specific initialization.
*/
@@ -90,11 +130,16 @@
{
mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads));
+ imx35_add_fec(NULL);
platform_add_devices(devices, ARRAY_SIZE(devices));
imx35_add_imx_uart0(&uart_pdata);
- mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+ mxc_register_device(&mxc_otg_udc_device, &usb_otg_pdata);
+
+ mxc_register_device(&mxc_usbh1, &usb_host_pdata);
+
+ imx35_add_mxc_nand(&mx35pdk_nand_board_info);
}
static void __init mx35pdk_timer_init(void)
diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c
index 28886f0..e790a00 100644
--- a/arch/arm/mach-mx3/mach-pcm043.c
+++ b/arch/arm/mach-mx3/mach-pcm043.c
@@ -42,7 +42,6 @@
#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
#include <mach/audmux.h>
-#include <mach/ssi.h>
#include "devices-imx35.h"
#include "devices.h"
@@ -141,7 +140,6 @@
static struct platform_device *devices[] __initdata = {
&pcm043_flash,
- &mxc_fec_device,
&imx_wdt_device0,
};
@@ -217,6 +215,13 @@
/* CAN2 */
MX35_PAD_TX5_RX0__CAN2_TXCAN,
MX35_PAD_TX4_RX1__CAN2_RXCAN,
+ /* esdhc */
+ MX35_PAD_SD1_CMD__ESDHC1_CMD,
+ MX35_PAD_SD1_CLK__ESDHC1_CLK,
+ MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
+ MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
+ MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
+ MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
};
#define AC97_GPIO_TXFS (1 * 32 + 31)
@@ -293,7 +298,7 @@
mdelay(1);
}
-static struct imx_ssi_platform_data pcm043_ssi_pdata = {
+static const struct imx_ssi_platform_data pcm043_ssi_pdata __initconst = {
.ac97_reset = pcm043_ac97_cold_reset,
.ac97_warm_reset = pcm043_ac97_warm_reset,
.flags = IMX_SSI_USE_AC97,
@@ -357,11 +362,12 @@
MXC_AUDMUX_V2_PTCR_TCLKDIR, /* clock is output */
MXC_AUDMUX_V2_PDCR_RXDSEL(3));
+ imx35_add_fec(NULL);
platform_add_devices(devices, ARRAY_SIZE(devices));
imx35_add_imx_uart0(&uart_pdata);
imx35_add_mxc_nand(&pcm037_nand_board_info);
- mxc_register_device(&imx_ssi_device0, &pcm043_ssi_pdata);
+ imx35_add_imx_ssi(0, &pcm043_ssi_pdata);
imx35_add_imx_uart1(&uart_pdata);
@@ -389,6 +395,7 @@
mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
imx35_add_flexcan1(NULL);
+ imx35_add_esdhc0(NULL);
}
static void __init pcm043_timer_init(void)
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index 20e48c0..b4ffc53 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -110,6 +110,24 @@
static int mxc_init_l2x0(void)
{
void __iomem *l2x0_base;
+ void __iomem *clkctl_base;
+/*
+ * First of all, we must repair broken chip settings. There are some
+ * i.MX35 CPUs in the wild, comming with bogus L2 cache settings. These
+ * misconfigured CPUs will run amok immediately when the L2 cache gets enabled.
+ * Workaraound is to setup the correct register setting prior enabling the
+ * L2 cache. This should not hurt already working CPUs, as they are using the
+ * same value
+ */
+#define L2_MEM_VAL 0x10
+
+ clkctl_base = ioremap(MX35_CLKCTL_BASE_ADDR, 4096);
+ if (clkctl_base != NULL) {
+ writel(0x00000515, clkctl_base + L2_MEM_VAL);
+ iounmap(clkctl_base);
+ } else {
+ pr_err("L2 cache: Cannot fix timing. Trying to continue without\n");
+ }
l2x0_base = ioremap(L2CC_BASE_ADDR, 4096);
if (IS_ERR(l2x0_base)) {
diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
index 0848db5..fad31cc 100644
--- a/arch/arm/mach-mx5/Kconfig
+++ b/arch/arm/mach-mx5/Kconfig
@@ -5,11 +5,14 @@
default y
select MXC_TZIC
select ARCH_MXC_IOMUX_V3
+ select ARCH_MXC_AUDMUX_V2
comment "MX5 platforms:"
config MACH_MX51_BABBAGE
bool "Support MX51 BABBAGE platforms"
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
help
Include support for MX51 Babbage platform, also known as MX51EVK in
u-boot. This includes specific configurations for the board and its
@@ -17,6 +20,8 @@
config MACH_MX51_3DS
bool "Support MX51PDK (3DS)"
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_DEBUG_BOARD
help
Include support for MX51PDK (3DS) platform. This includes specific
@@ -24,6 +29,8 @@
config MACH_EUKREA_CPUIMX51
bool "Support Eukrea CPUIMX51 module"
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
help
Include support for Eukrea CPUIMX51 platform. This includes
specific configurations for the module and its peripherals.
@@ -42,4 +49,11 @@
endchoice
+config MACH_MX51_EFIKAMX
+ bool "Support MX51 Genesi Efika MX nettop"
+ select IMX_HAVE_PLATFORM_IMX_UART
+ help
+ Include support for Genesi Efika MX nettop. This includes specific
+ configurations for the board and its peripherals.
+
endif
diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
index 86c66e7..d1aac9c 100644
--- a/arch/arm/mach-mx5/Makefile
+++ b/arch/arm/mach-mx5/Makefile
@@ -9,3 +9,4 @@
obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o
obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += board-cpuimx51.o
obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o
+obj-$(CONFIG_MACH_MX51_EFIKAMX) += board-mx51_efikamx.o
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
index 623607a..61f0510 100644
--- a/arch/arm/mach-mx5/board-cpuimx51.c
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -28,9 +28,7 @@
#include <mach/eukrea-baseboards.h>
#include <mach/common.h>
#include <mach/hardware.h>
-#include <mach/imx-uart.h>
#include <mach/iomux-mx51.h>
-#include <mach/i2c.h>
#include <mach/mxc_ehci.h>
#include <asm/irq.h>
@@ -39,6 +37,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
+#include "devices-imx51.h"
#include "devices.h"
#define CPUIMX51_USBH1_STP (0*32 + 27)
@@ -109,7 +108,6 @@
#endif
static struct platform_device *devices[] __initdata = {
- &mxc_fec_device,
#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
&serial_device,
#endif
@@ -148,11 +146,12 @@
MX51_PAD_USBH1_STP__USBH1_STP,
};
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
-static struct imxi2c_platform_data eukrea_cpuimx51_i2c_data = {
+static const
+struct imxi2c_platform_data eukrea_cpuimx51_i2c_data __initconst = {
.bitrate = 100000,
};
@@ -239,7 +238,7 @@
mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51_pads,
ARRAY_SIZE(eukrea_cpuimx51_pads));
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ imx51_add_imx_uart(0, &uart_pdata);
gpio_request(CPUIMX51_QUARTA_GPIO, "quarta_irq");
gpio_direction_input(CPUIMX51_QUARTA_GPIO);
gpio_free(CPUIMX51_QUARTA_GPIO);
@@ -253,9 +252,10 @@
gpio_direction_input(CPUIMX51_QUARTD_GPIO);
gpio_free(CPUIMX51_QUARTD_GPIO);
+ imx51_add_fec(NULL);
platform_add_devices(devices, ARRAY_SIZE(devices));
- mxc_register_device(&mxc_i2c_device1, &eukrea_cpuimx51_i2c_data);
+ imx51_add_imx_i2c(1, &eukrea_cpuimx51_i2c_data);
i2c_register_board_info(1, eukrea_cpuimx51_i2c_devices,
ARRAY_SIZE(eukrea_cpuimx51_i2c_devices));
diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c
index f95c2fd..ed08a23 100644
--- a/arch/arm/mach-mx5/board-mx51_3ds.c
+++ b/arch/arm/mach-mx5/board-mx51_3ds.c
@@ -13,6 +13,7 @@
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/input/matrix_keypad.h>
+#include <linux/spi/spi.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -21,12 +22,13 @@
#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/iomux-mx51.h>
-#include <mach/imx-uart.h>
#include <mach/3ds_debugboard.h>
+#include "devices-imx51.h"
#include "devices.h"
#define EXPIO_PARENT_INT (MXC_INTERNAL_IRQS + GPIO_PORTA + 6)
+#define MX51_3DS_ECSPI2_CS (GPIO_PORTC + 28)
static struct pad_desc mx51_3ds_pads[] = {
/* UART1 */
@@ -61,19 +63,25 @@
MX51_PAD_KEY_COL3__KEY_COL3,
MX51_PAD_KEY_COL4__KEY_COL4,
MX51_PAD_KEY_COL5__KEY_COL5,
+
+ /* eCSPI2 */
+ MX51_PAD_NANDF_RB2__ECSPI2_SCLK,
+ MX51_PAD_NANDF_RB3__ECSPI2_MISO,
+ MX51_PAD_NANDF_D15__ECSPI2_MOSI,
+ MX51_PAD_NANDF_D12__GPIO_3_28,
};
/* Serial ports */
#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
static inline void mxc_init_imx_uart(void)
{
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
- mxc_register_device(&mxc_uart_device1, &uart_pdata);
- mxc_register_device(&mxc_uart_device2, &uart_pdata);
+ imx51_add_imx_uart(0, &uart_pdata);
+ imx51_add_imx_uart(1, &uart_pdata);
+ imx51_add_imx_uart(2, &uart_pdata);
}
#else /* !SERIAL_IMX */
static inline void mxc_init_imx_uart(void)
@@ -127,6 +135,26 @@
}
#endif
+static int mx51_3ds_spi2_cs[] = {
+ MXC_SPI_CS(0),
+ MX51_3DS_ECSPI2_CS,
+};
+
+static const struct spi_imx_master mx51_3ds_ecspi2_pdata __initconst = {
+ .chipselect = mx51_3ds_spi2_cs,
+ .num_chipselect = ARRAY_SIZE(mx51_3ds_spi2_cs),
+};
+
+static struct spi_board_info mx51_3ds_spi_nor_device[] = {
+ {
+ .modalias = "m25p80",
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 1,
+ .mode = SPI_MODE_0,
+ .platform_data = NULL,},
+};
+
/*
* Board specific initialization.
*/
@@ -136,6 +164,10 @@
ARRAY_SIZE(mx51_3ds_pads));
mxc_init_imx_uart();
+ imx51_add_ecspi(1, &mx51_3ds_ecspi2_pdata);
+ spi_register_board_info(mx51_3ds_spi_nor_device,
+ ARRAY_SIZE(mx51_3ds_spi_nor_device));
+
if (mxc_expio_init(MX51_CS5_BASE_ADDR, EXPIO_PARENT_INT))
printk(KERN_WARNING "Init of the debugboard failed, all "
"devices on the board are unusable.\n");
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index 6e384d9..23ee4a4 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -17,12 +17,11 @@
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/fsl_devices.h>
+#include <linux/fec.h>
#include <mach/common.h>
#include <mach/hardware.h>
-#include <mach/imx-uart.h>
#include <mach/iomux-mx51.h>
-#include <mach/i2c.h>
#include <mach/mxc_ehci.h>
#include <asm/irq.h>
@@ -31,11 +30,13 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
+#include "devices-imx51.h"
#include "devices.h"
#define BABBAGE_USB_HUB_RESET (0*32 + 7) /* GPIO_1_7 */
#define BABBAGE_USBH1_STP (0*32 + 27) /* GPIO_1_27 */
-#define BABBAGE_PHY_RESET (1*32 +5) /* GPIO_2_5 */
+#define BABBAGE_PHY_RESET (1*32 + 5) /* GPIO_2_5 */
+#define BABBAGE_FEC_PHY_RESET (1*32 + 14) /* GPIO_2_14 */
/* USB_CTRL_1 */
#define MX51_USB_CTRL_1_OFFSET 0x10
@@ -45,10 +46,6 @@
#define MX51_USB_PLL_DIV_19_2_MHZ 0x01
#define MX51_USB_PLL_DIV_24_MHZ 0x02
-static struct platform_device *devices[] __initdata = {
- &mxc_fec_device,
-};
-
static struct pad_desc mx51babbage_pads[] = {
/* UART1 */
MX51_PAD_UART1_RXD__UART1_RXD,
@@ -93,19 +90,41 @@
/* USB HUB reset line*/
MX51_PAD_GPIO_1_7__GPIO_1_7,
+
+ /* FEC */
+ MX51_PAD_EIM_EB2__FEC_MDIO,
+ MX51_PAD_EIM_EB3__FEC_RDAT1,
+ MX51_PAD_EIM_CS2__FEC_RDAT2,
+ MX51_PAD_EIM_CS3__FEC_RDAT3,
+ MX51_PAD_EIM_CS4__FEC_RX_ER,
+ MX51_PAD_EIM_CS5__FEC_CRS,
+ MX51_PAD_NANDF_RB2__FEC_COL,
+ MX51_PAD_NANDF_RB3__FEC_RXCLK,
+ MX51_PAD_NANDF_RB6__FEC_RDAT0,
+ MX51_PAD_NANDF_RB7__FEC_TDAT0,
+ MX51_PAD_NANDF_CS2__FEC_TX_ER,
+ MX51_PAD_NANDF_CS3__FEC_MDC,
+ MX51_PAD_NANDF_CS4__FEC_TDAT1,
+ MX51_PAD_NANDF_CS5__FEC_TDAT2,
+ MX51_PAD_NANDF_CS6__FEC_TDAT3,
+ MX51_PAD_NANDF_CS7__FEC_TX_EN,
+ MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK,
+
+ /* FEC PHY reset line */
+ MX51_PAD_EIM_A20__GPIO_2_14,
};
/* Serial ports */
#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
static inline void mxc_init_imx_uart(void)
{
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
- mxc_register_device(&mxc_uart_device1, &uart_pdata);
- mxc_register_device(&mxc_uart_device2, &uart_pdata);
+ imx51_add_imx_uart(0, &uart_pdata);
+ imx51_add_imx_uart(1, &uart_pdata);
+ imx51_add_imx_uart(2, &uart_pdata);
}
#else /* !SERIAL_IMX */
static inline void mxc_init_imx_uart(void)
@@ -113,7 +132,7 @@
}
#endif /* SERIAL_IMX */
-static struct imxi2c_platform_data babbage_i2c_data = {
+static const struct imxi2c_platform_data babbage_i2c_data __initconst = {
.bitrate = 100000,
};
@@ -171,6 +190,22 @@
gpio_set_value(BABBAGE_USB_HUB_RESET, 1);
}
+static inline void babbage_fec_reset(void)
+{
+ int ret;
+
+ /* reset FEC PHY */
+ ret = gpio_request(BABBAGE_FEC_PHY_RESET, "fec-phy-reset");
+ if (ret) {
+ printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
+ return;
+ }
+ gpio_direction_output(BABBAGE_FEC_PHY_RESET, 0);
+ gpio_set_value(BABBAGE_FEC_PHY_RESET, 0);
+ msleep(1);
+ gpio_set_value(BABBAGE_FEC_PHY_RESET, 1);
+}
+
/* This function is board specific as the bit mask for the plldiv will also
be different for other Freescale SoCs, thus a common bitmask is not
possible and cannot get place in /plat-mxc/ehci.c.*/
@@ -178,7 +213,7 @@
{
u32 v;
void __iomem *usb_base;
- u32 usbother_base;
+ void __iomem *usbother_base;
usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
@@ -196,7 +231,7 @@
{
u32 v;
void __iomem *usb_base;
- u32 usbother_base;
+ void __iomem *usbother_base;
usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
@@ -250,10 +285,11 @@
mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads,
ARRAY_SIZE(mx51babbage_pads));
mxc_init_imx_uart();
- platform_add_devices(devices, ARRAY_SIZE(devices));
+ babbage_fec_reset();
+ imx51_add_fec(NULL);
- mxc_register_device(&mxc_i2c_device0, &babbage_i2c_data);
- mxc_register_device(&mxc_i2c_device1, &babbage_i2c_data);
+ imx51_add_imx_i2c(0, &babbage_i2c_data);
+ imx51_add_imx_i2c(1, &babbage_i2c_data);
mxc_register_device(&mxc_hsi2c_device, &babbage_hsi2c_data);
if (otg_mode_host)
@@ -283,7 +319,7 @@
/* Maintainer: Amit Kucheria <amit.kucheria@canonical.com> */
.phys_io = MX51_AIPS1_BASE_ADDR,
.io_pg_offst = ((MX51_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
+ .boot_params = MX51_PHYS_OFFSET + 0x100,
.map_io = mx51_map_io,
.init_irq = mx51_init_irq,
.init_machine = mxc_board_init,
diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c
new file mode 100644
index 0000000..b00502a
--- /dev/null
+++ b/arch/arm/mach-mx5/board-mx51_efikamx.c
@@ -0,0 +1,121 @@
+/*
+ * Copyright (C) 2010 Linaro Limited
+ *
+ * based on code from the following
+ * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved.
+ * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/fsl_devices.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-mx51.h>
+#include <mach/i2c.h>
+#include <mach/mxc_ehci.h>
+
+#include <asm/irq.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include "devices-imx51.h"
+#include "devices.h"
+
+#define MX51_USB_PLL_DIV_24_MHZ 0x01
+
+static struct pad_desc mx51efikamx_pads[] = {
+ /* UART1 */
+ MX51_PAD_UART1_RXD__UART1_RXD,
+ MX51_PAD_UART1_TXD__UART1_TXD,
+ MX51_PAD_UART1_RTS__UART1_RTS,
+ MX51_PAD_UART1_CTS__UART1_CTS,
+};
+
+/* Serial ports */
+#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
+static const struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static inline void mxc_init_imx_uart(void)
+{
+ imx51_add_imx_uart(0, &uart_pdata);
+ imx51_add_imx_uart(1, &uart_pdata);
+ imx51_add_imx_uart(2, &uart_pdata);
+}
+#else /* !SERIAL_IMX */
+static inline void mxc_init_imx_uart(void)
+{
+}
+#endif /* SERIAL_IMX */
+
+/* This function is board specific as the bit mask for the plldiv will also
+ * be different for other Freescale SoCs, thus a common bitmask is not
+ * possible and cannot get place in /plat-mxc/ehci.c.
+ */
+static int initialize_otg_port(struct platform_device *pdev)
+{
+ u32 v;
+ void __iomem *usb_base;
+ void __iomem *usbother_base;
+ usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+ usbother_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
+
+ /* Set the PHY clock to 19.2MHz */
+ v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
+ v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
+ v |= MX51_USB_PLL_DIV_24_MHZ;
+ __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
+ iounmap(usb_base);
+ return 0;
+}
+
+static struct mxc_usbh_platform_data dr_utmi_config = {
+ .init = initialize_otg_port,
+ .portsc = MXC_EHCI_UTMI_16BIT,
+ .flags = MXC_EHCI_INTERNAL_PHY,
+};
+
+static void __init mxc_board_init(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads,
+ ARRAY_SIZE(mx51efikamx_pads));
+ mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+ mxc_init_imx_uart();
+}
+
+static void __init mx51_efikamx_timer_init(void)
+{
+ mx51_clocks_init(32768, 24000000, 22579200, 24576000);
+}
+
+static struct sys_timer mxc_timer = {
+ .init = mx51_efikamx_timer_init,
+};
+
+MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop")
+ /* Maintainer: Amit Kucheria <amit.kucheria@linaro.org> */
+ .phys_io = MX51_AIPS1_BASE_ADDR,
+ .io_pg_offst = ((MX51_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = MX51_PHYS_OFFSET + 0x100,
+ .map_io = mx51_map_io,
+ .init_irq = mx51_init_irq,
+ .init_machine = mxc_board_init,
+ .timer = &mxc_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c
index 57c10a9..21cecc0 100644
--- a/arch/arm/mach-mx5/clock-mx51.c
+++ b/arch/arm/mach-mx5/clock-mx51.c
@@ -41,34 +41,36 @@
#define MAX_DPLL_WAIT_TRIES 1000 /* 1000 * udelay(1) = 1ms */
+static void _clk_ccgr_setclk(struct clk *clk, unsigned mode)
+{
+ u32 reg = __raw_readl(clk->enable_reg);
+
+ reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift);
+ reg |= mode << clk->enable_shift;
+
+ __raw_writel(reg, clk->enable_reg);
+}
+
static int _clk_ccgr_enable(struct clk *clk)
{
- u32 reg;
-
- reg = __raw_readl(clk->enable_reg);
- reg |= MXC_CCM_CCGRx_MOD_ON << clk->enable_shift;
- __raw_writel(reg, clk->enable_reg);
-
+ _clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_ON);
return 0;
}
static void _clk_ccgr_disable(struct clk *clk)
{
- u32 reg;
- reg = __raw_readl(clk->enable_reg);
- reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift);
- __raw_writel(reg, clk->enable_reg);
+ _clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_OFF);
+}
+static int _clk_ccgr_enable_inrun(struct clk *clk)
+{
+ _clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_IDLE);
+ return 0;
}
static void _clk_ccgr_disable_inwait(struct clk *clk)
{
- u32 reg;
-
- reg = __raw_readl(clk->enable_reg);
- reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift);
- reg |= MXC_CCM_CCGRx_MOD_IDLE << clk->enable_shift;
- __raw_writel(reg, clk->enable_reg);
+ _clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_IDLE);
}
/*
@@ -571,6 +573,64 @@
return 0;
}
+#define clk_nfc_set_parent NULL
+
+static unsigned long clk_nfc_get_rate(struct clk *clk)
+{
+ unsigned long rate;
+ u32 reg, div;
+
+ reg = __raw_readl(MXC_CCM_CBCDR);
+ div = ((reg & MXC_CCM_CBCDR_NFC_PODF_MASK) >>
+ MXC_CCM_CBCDR_NFC_PODF_OFFSET) + 1;
+ rate = clk_get_rate(clk->parent) / div;
+ WARN_ON(rate == 0);
+ return rate;
+}
+
+static unsigned long clk_nfc_round_rate(struct clk *clk,
+ unsigned long rate)
+{
+ u32 div;
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+
+ if (!rate)
+ return -EINVAL;
+
+ div = parent_rate / rate;
+
+ if (parent_rate % rate)
+ div++;
+
+ if (div > 8)
+ return -EINVAL;
+
+ return parent_rate / div;
+
+}
+
+static int clk_nfc_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 reg, div;
+
+ div = clk_get_rate(clk->parent) / rate;
+ if (div == 0)
+ div++;
+ if (((clk_get_rate(clk->parent) / div) != rate) || (div > 8))
+ return -EINVAL;
+
+ reg = __raw_readl(MXC_CCM_CBCDR);
+ reg &= ~MXC_CCM_CBCDR_NFC_PODF_MASK;
+ reg |= (div - 1) << MXC_CCM_CBCDR_NFC_PODF_OFFSET;
+ __raw_writel(reg, MXC_CCM_CBCDR);
+
+ while (__raw_readl(MXC_CCM_CDHIPR) &
+ MXC_CCM_CDHIPR_NFC_IPG_INT_MEM_PODF_BUSY){
+ }
+
+ return 0;
+}
+
static unsigned long clk_usboh3_get_rate(struct clk *clk)
{
u32 reg, prediv, podf;
@@ -620,6 +680,17 @@
return ckih2_reference;
}
+static unsigned long clk_emi_slow_get_rate(struct clk *clk)
+{
+ u32 reg, div;
+
+ reg = __raw_readl(MXC_CCM_CBCDR);
+ div = ((reg & MXC_CCM_CBCDR_EMI_PODF_MASK) >>
+ MXC_CCM_CBCDR_EMI_PODF_OFFSET) + 1;
+
+ return clk_get_rate(clk->parent) / div;
+}
+
/* External high frequency clock */
static struct clk ckih_clk = {
.get_rate = get_high_reference_clock_rate,
@@ -762,45 +833,105 @@
.id = 0,
};
-#define DEFINE_CLOCK(name, i, er, es, gr, sr, p, s) \
+static struct clk emi_slow_clk = {
+ .parent = &pll2_sw_clk,
+ .enable_reg = MXC_CCM_CCGR5,
+ .enable_shift = MXC_CCM_CCGRx_CG8_OFFSET,
+ .enable = _clk_ccgr_enable,
+ .disable = _clk_ccgr_disable_inwait,
+ .get_rate = clk_emi_slow_get_rate,
+};
+
+#define DEFINE_CLOCK1(name, i, er, es, pfx, p, s) \
static struct clk name = { \
.id = i, \
.enable_reg = er, \
.enable_shift = es, \
- .get_rate = gr, \
- .set_rate = sr, \
+ .get_rate = pfx##_get_rate, \
+ .set_rate = pfx##_set_rate, \
+ .round_rate = pfx##_round_rate, \
+ .set_parent = pfx##_set_parent, \
.enable = _clk_ccgr_enable, \
.disable = _clk_ccgr_disable, \
.parent = p, \
.secondary = s, \
}
-/* DEFINE_CLOCK(name, id, enable_reg, enable_shift,
- get_rate, set_rate, parent, secondary); */
+/* eCSPI */
+static unsigned long clk_ecspi_get_rate(struct clk *clk)
+{
+ u32 reg, pred, podf;
+
+ reg = __raw_readl(MXC_CCM_CSCDR2);
+
+ pred = (reg & MXC_CCM_CSCDR2_CSPI_CLK_PRED_MASK) >>
+ MXC_CCM_CSCDR2_CSPI_CLK_PRED_OFFSET;
+ podf = (reg & MXC_CCM_CSCDR2_CSPI_CLK_PODF_MASK) >>
+ MXC_CCM_CSCDR2_CSPI_CLK_PODF_OFFSET;
+
+ return DIV_ROUND_CLOSEST(clk_get_rate(clk->parent),
+ (pred + 1) * (podf + 1));
+}
+
+static int clk_ecspi_set_parent(struct clk *clk, struct clk *parent)
+{
+ u32 reg, mux;
+
+ mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk, &pll3_sw_clk,
+ &lp_apm_clk);
+
+ reg = __raw_readl(MXC_CCM_CSCMR1) & ~MXC_CCM_CSCMR1_CSPI_CLK_SEL_MASK;
+ reg |= mux << MXC_CCM_CSCMR1_CSPI_CLK_SEL_OFFSET;
+ __raw_writel(reg, MXC_CCM_CSCMR1);
+
+ return 0;
+}
+
+static struct clk ecspi_main_clk = {
+ .parent = &pll3_sw_clk,
+ .get_rate = clk_ecspi_get_rate,
+ .set_parent = clk_ecspi_set_parent,
+};
+
+#define DEFINE_CLOCK_FULL(name, i, er, es, gr, sr, e, d, p, s) \
+ static struct clk name = { \
+ .id = i, \
+ .enable_reg = er, \
+ .enable_shift = es, \
+ .get_rate = gr, \
+ .set_rate = sr, \
+ .enable = e, \
+ .disable = d, \
+ .parent = p, \
+ .secondary = s, \
+ }
+
+#define DEFINE_CLOCK(name, i, er, es, gr, sr, p, s) \
+ DEFINE_CLOCK_FULL(name, i, er, es, gr, sr, _clk_ccgr_enable, _clk_ccgr_disable, p, s)
/* Shared peripheral bus arbiter */
DEFINE_CLOCK(spba_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG0_OFFSET,
NULL, NULL, &ipg_clk, NULL);
/* UART */
-DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG4_OFFSET,
- NULL, NULL, &uart_root_clk, NULL);
-DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG6_OFFSET,
- NULL, NULL, &uart_root_clk, NULL);
-DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG8_OFFSET,
- NULL, NULL, &uart_root_clk, NULL);
DEFINE_CLOCK(uart1_ipg_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG3_OFFSET,
NULL, NULL, &ipg_clk, &aips_tz1_clk);
DEFINE_CLOCK(uart2_ipg_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG5_OFFSET,
NULL, NULL, &ipg_clk, &aips_tz1_clk);
DEFINE_CLOCK(uart3_ipg_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG7_OFFSET,
NULL, NULL, &ipg_clk, &spba_clk);
+DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG4_OFFSET,
+ NULL, NULL, &uart_root_clk, &uart1_ipg_clk);
+DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG6_OFFSET,
+ NULL, NULL, &uart_root_clk, &uart2_ipg_clk);
+DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG8_OFFSET,
+ NULL, NULL, &uart_root_clk, &uart3_ipg_clk);
/* GPT */
-DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET,
- NULL, NULL, &ipg_clk, NULL);
DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET,
NULL, NULL, &ipg_clk, NULL);
+DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET,
+ NULL, NULL, &ipg_clk, &gpt_ipg_clk);
/* I2C */
DEFINE_CLOCK(i2c1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG9_OFFSET,
@@ -814,6 +945,42 @@
DEFINE_CLOCK(fec_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG12_OFFSET,
NULL, NULL, &ipg_clk, NULL);
+/* NFC */
+DEFINE_CLOCK1(nfc_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG10_OFFSET,
+ clk_nfc, &emi_slow_clk, NULL);
+
+/* SSI */
+DEFINE_CLOCK(ssi1_ipg_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG8_OFFSET,
+ NULL, NULL, &ipg_clk, NULL);
+DEFINE_CLOCK(ssi1_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG9_OFFSET,
+ NULL, NULL, &pll3_sw_clk, &ssi1_ipg_clk);
+DEFINE_CLOCK(ssi2_ipg_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG10_OFFSET,
+ NULL, NULL, &ipg_clk, NULL);
+DEFINE_CLOCK(ssi2_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG11_OFFSET,
+ NULL, NULL, &pll3_sw_clk, &ssi2_ipg_clk);
+
+/* eCSPI */
+DEFINE_CLOCK_FULL(ecspi1_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG9_OFFSET,
+ NULL, NULL, _clk_ccgr_enable_inrun, _clk_ccgr_disable,
+ &ipg_clk, &spba_clk);
+DEFINE_CLOCK(ecspi1_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG10_OFFSET,
+ NULL, NULL, &ecspi_main_clk, &ecspi1_ipg_clk);
+DEFINE_CLOCK_FULL(ecspi2_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG11_OFFSET,
+ NULL, NULL, _clk_ccgr_enable_inrun, _clk_ccgr_disable,
+ &ipg_clk, &aips_tz2_clk);
+DEFINE_CLOCK(ecspi2_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG12_OFFSET,
+ NULL, NULL, &ecspi_main_clk, &ecspi2_ipg_clk);
+
+/* CSPI */
+DEFINE_CLOCK(cspi_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG9_OFFSET,
+ NULL, NULL, &ipg_clk, &aips_tz2_clk);
+DEFINE_CLOCK(cspi_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG13_OFFSET,
+ NULL, NULL, &ipg_clk, &cspi_ipg_clk);
+
+/* SDMA */
+DEFINE_CLOCK(sdma_clk, 1, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG15_OFFSET,
+ NULL, NULL, &ahb_clk, NULL);
+
#define _REGISTER_CLOCK(d, n, c) \
{ \
.dev_id = d, \
@@ -837,6 +1004,16 @@
_REGISTER_CLOCK("fsl-usb2-udc", "usb", usboh3_clk)
_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", ahb_clk)
_REGISTER_CLOCK("imx-keypad.0", NULL, kpp_clk)
+ _REGISTER_CLOCK("mxc_nand", NULL, nfc_clk)
+ _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
+ _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
+ _REGISTER_CLOCK("imx-sdma", NULL, sdma_clk)
+ _REGISTER_CLOCK(NULL, "ckih", ckih_clk)
+ _REGISTER_CLOCK(NULL, "ckih2", ckih2_clk)
+ _REGISTER_CLOCK(NULL, "gpt_32k", gpt_32k_clk)
+ _REGISTER_CLOCK("imx51-ecspi.0", NULL, ecspi1_clk)
+ _REGISTER_CLOCK("imx51-ecspi.1", NULL, ecspi2_clk)
+ _REGISTER_CLOCK("imx51-cspi.0", NULL, cspi_clk)
};
static void clk_tree_init(void)
diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c
index 2d37785..eaacb6e 100644
--- a/arch/arm/mach-mx5/cpu.c
+++ b/arch/arm/mach-mx5/cpu.c
@@ -70,6 +70,25 @@
}
EXPORT_SYMBOL(mx51_revision);
+#ifdef CONFIG_NEON
+
+/*
+ * All versions of the silicon before Rev. 3 have broken NEON implementations.
+ * Dependent on link order - so the assumption is that vfp_init is called
+ * before us.
+ */
+static int __init mx51_neon_fixup(void)
+{
+ if (mx51_revision() < MX51_CHIP_REV_3_0 && (elf_hwcap & HWCAP_NEON)) {
+ elf_hwcap &= ~HWCAP_NEON;
+ pr_info("Turning off NEON support, detected broken NEON implementation\n");
+ }
+ return 0;
+}
+
+late_initcall(mx51_neon_fixup);
+#endif
+
static int __init post_cpu_init(void)
{
unsigned int reg;
diff --git a/arch/arm/mach-mx5/devices-imx51.h b/arch/arm/mach-mx5/devices-imx51.h
new file mode 100644
index 0000000..c233379
--- /dev/null
+++ b/arch/arm/mach-mx5/devices-imx51.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx51.h>
+#include <mach/devices-common.h>
+
+extern const struct imx_fec_data imx51_fec_data __initconst;
+#define imx51_add_fec(pdata) \
+ imx_add_fec(&imx51_fec_data, pdata)
+
+extern const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst;
+#define imx51_add_imx_i2c(id, pdata) \
+ imx_add_imx_i2c(&imx51_imx_i2c_data[id], pdata)
+
+extern const struct imx_imx_ssi_data imx51_imx_ssi_data[] __initconst;
+#define imx51_add_imx_ssi(id, pdata) \
+ imx_add_imx_ssi(&imx51_imx_ssi_data[id], pdata)
+
+extern const struct imx_imx_uart_1irq_data imx51_imx_uart_data[] __initconst;
+#define imx51_add_imx_uart(id, pdata) \
+ imx_add_imx_uart_1irq(&imx51_imx_uart_data[id], pdata)
+
+extern const struct imx_mxc_nand_data imx51_mxc_nand_data __initconst;
+#define imx51_add_mxc_nand(pdata) \
+ imx_add_mxc_nand(&imx51_mxc_nand_data, pdata)
+
+extern const struct imx_spi_imx_data imx51_cspi_data __initconst;
+#define imx51_add_cspi(pdata) \
+ imx_add_spi_imx(&imx51_cspi_data, pdata)
+
+extern const struct imx_spi_imx_data imx51_ecspi_data[] __initconst;
+#define imx51_add_ecspi(id, pdata) \
+ imx_add_spi_imx(&imx51_ecspi_data[id], pdata)
diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c
index 1920ff4..4c7be87 100644
--- a/arch/arm/mach-mx5/devices.c
+++ b/arch/arm/mach-mx5/devices.c
@@ -17,120 +17,6 @@
#include <mach/imx-uart.h>
#include <mach/irqs.h>
-static struct resource uart0[] = {
- {
- .start = MX51_UART1_BASE_ADDR,
- .end = MX51_UART1_BASE_ADDR + 0xfff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX51_MXC_INT_UART1,
- .end = MX51_MXC_INT_UART1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_uart_device0 = {
- .name = "imx-uart",
- .id = 0,
- .resource = uart0,
- .num_resources = ARRAY_SIZE(uart0),
-};
-
-static struct resource uart1[] = {
- {
- .start = MX51_UART2_BASE_ADDR,
- .end = MX51_UART2_BASE_ADDR + 0xfff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX51_MXC_INT_UART2,
- .end = MX51_MXC_INT_UART2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_uart_device1 = {
- .name = "imx-uart",
- .id = 1,
- .resource = uart1,
- .num_resources = ARRAY_SIZE(uart1),
-};
-
-static struct resource uart2[] = {
- {
- .start = MX51_UART3_BASE_ADDR,
- .end = MX51_UART3_BASE_ADDR + 0xfff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX51_MXC_INT_UART3,
- .end = MX51_MXC_INT_UART3,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_uart_device2 = {
- .name = "imx-uart",
- .id = 2,
- .resource = uart2,
- .num_resources = ARRAY_SIZE(uart2),
-};
-
-static struct resource mxc_fec_resources[] = {
- {
- .start = MX51_MXC_FEC_BASE_ADDR,
- .end = MX51_MXC_FEC_BASE_ADDR + 0xfff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX51_MXC_INT_FEC,
- .end = MX51_MXC_INT_FEC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_fec_device = {
- .name = "fec",
- .id = 0,
- .num_resources = ARRAY_SIZE(mxc_fec_resources),
- .resource = mxc_fec_resources,
-};
-
-static struct resource mxc_i2c0_resources[] = {
- {
- .start = MX51_I2C1_BASE_ADDR,
- .end = MX51_I2C1_BASE_ADDR + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX51_MXC_INT_I2C1,
- .end = MX51_MXC_INT_I2C1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_i2c_device0 = {
- .name = "imx-i2c",
- .id = 0,
- .num_resources = ARRAY_SIZE(mxc_i2c0_resources),
- .resource = mxc_i2c0_resources,
-};
-
-static struct resource mxc_i2c1_resources[] = {
- {
- .start = MX51_I2C2_BASE_ADDR,
- .end = MX51_I2C2_BASE_ADDR + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX51_MXC_INT_I2C2,
- .end = MX51_MXC_INT_I2C2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_i2c_device1 = {
- .name = "imx-i2c",
- .id = 1,
- .num_resources = ARRAY_SIZE(mxc_i2c1_resources),
- .resource = mxc_i2c1_resources,
-};
-
static struct resource mxc_hsi2c_resources[] = {
{
.start = MX51_HSI2C_DMA_BASE_ADDR,
diff --git a/arch/arm/mach-mx5/devices.h b/arch/arm/mach-mx5/devices.h
index e509cfa..af1d07c 100644
--- a/arch/arm/mach-mx5/devices.h
+++ b/arch/arm/mach-mx5/devices.h
@@ -1,12 +1,6 @@
-extern struct platform_device mxc_uart_device0;
-extern struct platform_device mxc_uart_device1;
-extern struct platform_device mxc_uart_device2;
-extern struct platform_device mxc_fec_device;
extern struct platform_device mxc_usbdr_host_device;
extern struct platform_device mxc_usbh1_device;
extern struct platform_device mxc_usbdr_udc_device;
extern struct platform_device mxc_wdt;
-extern struct platform_device mxc_i2c_device0;
-extern struct platform_device mxc_i2c_device1;
extern struct platform_device mxc_hsi2c_device;
extern struct platform_device mxc_keypad_device;
diff --git a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
index ffa93d1..d0e417c 100644
--- a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
+++ b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
@@ -30,6 +30,7 @@
#include <asm/mach/arch.h>
+#include "devices-imx51.h"
#include "devices.h"
#define MBIMX51_TSC2007_GPIO (2*32 + 30)
@@ -114,7 +115,7 @@
MX51_PAD_KEY_COL3__KEY_COL3,
};
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
@@ -172,8 +173,8 @@
mxc_iomux_v3_setup_multiple_pads(mbimx51_pads,
ARRAY_SIZE(mbimx51_pads));
- mxc_register_device(&mxc_uart_device1, NULL);
- mxc_register_device(&mxc_uart_device2, &uart_pdata);
+ imx51_add_imx_uart(1, NULL);
+ imx51_add_imx_uart(2, &uart_pdata);
gpio_request(MBIMX51_LED0, "LED0");
gpio_direction_output(MBIMX51_LED0, 1);
diff --git a/arch/arm/mach-netx/include/mach/vmalloc.h b/arch/arm/mach-netx/include/mach/vmalloc.h
index 25d5cc6..7cca357 100644
--- a/arch/arm/mach-netx/include/mach/vmalloc.h
+++ b/arch/arm/mach-netx/include/mach/vmalloc.h
@@ -16,4 +16,4 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
+#define VMALLOC_END 0xd0000000
diff --git a/arch/arm/mach-omap1/include/mach/vmalloc.h b/arch/arm/mach-omap1/include/mach/vmalloc.h
index 1b2af14..b001f67 100644
--- a/arch/arm/mach-omap1/include/mach/vmalloc.h
+++ b/arch/arm/mach-omap1/include/mach/vmalloc.h
@@ -17,4 +17,4 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#define VMALLOC_END (PAGE_OFFSET + 0x18000000)
+#define VMALLOC_END 0xd8000000
diff --git a/arch/arm/mach-omap2/include/mach/vmalloc.h b/arch/arm/mach-omap2/include/mach/vmalloc.h
index 9ce9b6e..4da31e9 100644
--- a/arch/arm/mach-omap2/include/mach/vmalloc.h
+++ b/arch/arm/mach-omap2/include/mach/vmalloc.h
@@ -17,4 +17,4 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#define VMALLOC_END (PAGE_OFFSET + 0x38000000)
+#define VMALLOC_END 0xf8000000
diff --git a/arch/arm/mach-pnx4008/include/mach/vmalloc.h b/arch/arm/mach-pnx4008/include/mach/vmalloc.h
index 2ad3983..31b65ee 100644
--- a/arch/arm/mach-pnx4008/include/mach/vmalloc.h
+++ b/arch/arm/mach-pnx4008/include/mach/vmalloc.h
@@ -17,4 +17,4 @@
* The vmalloc() routines leaves a hole of 4kB between each vmalloced
* area for the same reason. ;)
*/
-#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
+#define VMALLOC_END 0xd0000000
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 7aefb90..dd235ec 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -8,19 +8,16 @@
bool "Intel DBPXA250 Development Platform (aka Lubbock)"
select PXA25x
select SA1111
- select PXA_HAVE_BOARD_IRQS
config MACH_MAINSTONE
bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
select PXA27x
select HAVE_PWM
- select PXA_HAVE_BOARD_IRQS
config MACH_ZYLONITE
bool
select PXA3xx
select HAVE_PWM
- select PXA_HAVE_BOARD_IRQS
config MACH_ZYLONITE300
bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
@@ -44,6 +41,10 @@
select PXA3xx
select CPU_PXA930
+config MACH_TAVOREVB3
+ bool "PXA95x Development Platform (aka TavorEVB III)"
+ select CPU_PXA950
+
config MACH_SAAR
bool "PXA930 Handheld Platform (aka SAAR)"
select PXA3xx
@@ -61,7 +62,6 @@
select ISA
select I2C_GPIO
select HAVE_PWM
- select PXA_HAVE_BOARD_IRQS
select PXA_HAVE_ISA_IRQS
select ARCOM_PCMCIA
@@ -69,7 +69,6 @@
bool "Arcom/Eurotech ZEUS SBC"
select PXA27x
select ISA
- select PXA_HAVE_BOARD_IRQS
select PXA_HAVE_ISA_IRQS
select ARCOM_PCMCIA
@@ -77,7 +76,6 @@
bool "Balloon 3 board"
select PXA27x
select IWMMXT
- select PXA_HAVE_BOARD_IRQS
config MACH_CSB726
bool "Enable Cogent CSB726 System On a Module"
@@ -140,13 +138,11 @@
bool "Intel Mote 2 Platform"
select PXA27x
select IWMMXT
- select PXA_HAVE_BOARD_IRQS
config MACH_STARGATE2
bool "Intel Stargate 2 Platform"
select PXA27x
select IWMMXT
- select PXA_HAVE_BOARD_IRQS
config MACH_XCEP
bool "Iskratel Electronics XCEP"
@@ -206,13 +202,11 @@
bool "LogicPD PXA270 Card Engine Development Platform"
select PXA27x
select HAVE_PWM
- select PXA_HAVE_BOARD_IRQS
config MACH_PCM027
bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
select PXA27x
select IWMMXT
- select PXA_HAVE_BOARD_IRQS
config MACH_PCM990_BASEBOARD
bool "PHYTEC PCM-990 development board"
@@ -247,7 +241,6 @@
depends on MACH_COLIBRI
select PXA27x
select HAVE_PWM
- select PXA_HAVE_BOARD_IRQS
config MACH_COLIBRI300
bool "Toradex Colibri PXA300/310"
@@ -274,7 +267,6 @@
select PXA27x
select IWMMXT
select HAVE_PWM
- select PXA_HAVE_BOARD_IRQS
config MACH_H5000
bool "HP iPAQ h5000"
@@ -289,7 +281,6 @@
select PXA27x
select IWMMXT
select HAVE_PWM
- select PXA_HAVE_BOARD_IRQS
config MACH_MIOA701
bool "Mitac Mio A701 Support"
@@ -307,7 +298,6 @@
select PXA27x
select IWMMXT
select HAVE_PWM
- select PXA_HAVE_BOARD_IRQS
config MACH_EZX_A780
bool "Motorola EZX A780"
@@ -478,7 +468,6 @@
depends on PXA_SHARPSL
select PXA25x
select SHARP_LOCOMO
- select PXA_HAVE_BOARD_IRQS
config MACH_CORGI
bool "Enable Sharp SL-C700 (Corgi) Support"
@@ -523,7 +512,6 @@
bool "Enable Sharp SL-6000x (Tosa) Support"
depends on PXA_SHARPSL
select PXA25x
- select PXA_HAVE_BOARD_IRQS
config TOSA_BT
tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
@@ -552,7 +540,6 @@
config ARCH_PXA_ESERIES
bool "PXA based Toshiba e-series PDAs"
select PXA25x
- select PXA_HAVE_BOARD_IRQS
config MACH_E330
bool "Toshiba e330"
@@ -606,7 +593,6 @@
bool "Zipit Z2 Handheld"
select PXA27x
select HAVE_PWM
- select PXA_HAVE_BOARD_IRQS
endmenu
@@ -643,6 +629,7 @@
config CPU_PXA310
bool
select CPU_PXA300
+ select PXA310_ULPI if USB_ULPI
help
PXA310 (codename Monahans-LV)
@@ -692,10 +679,10 @@
select HWMON
select SENSORS_MAX1111
-config PXA_HAVE_BOARD_IRQS
+config PXA_HAVE_ISA_IRQS
bool
-config PXA_HAVE_ISA_IRQS
+config PXA310_ULPI
bool
endif
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 85c7fb3..e2f89c2 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -18,7 +18,7 @@
# SoC-specific code
obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o pxa2xx.o pxa25x.o
obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o pxa2xx.o pxa27x.o
-obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o pxa3xx.o smemc.o
+obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o
obj-$(CONFIG_CPU_PXA300) += pxa300.o
obj-$(CONFIG_CPU_PXA320) += pxa320.o
obj-$(CONFIG_CPU_PXA930) += pxa930.o
@@ -32,6 +32,7 @@
obj-$(CONFIG_MACH_ZYLONITE320) += zylonite.o zylonite_pxa320.o
obj-$(CONFIG_MACH_LITTLETON) += littleton.o
obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o
+obj-$(CONFIG_MACH_TAVOREVB3) += tavorevb3.o
obj-$(CONFIG_MACH_SAAR) += saar.o
# 3rd Party Dev Platforms
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index 9041340..79d0f6c 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -68,42 +68,6 @@
/* Reset, configured as GPIO wakeup source */
GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
-
- /* LEDs */
- GPIO9_GPIO, /* NAND activity LED */
- GPIO10_GPIO, /* Heartbeat LED */
-
- /* AC97 */
- GPIO28_AC97_BITCLK,
- GPIO29_AC97_SDATA_IN_0,
- GPIO30_AC97_SDATA_OUT,
- GPIO31_AC97_SYNC,
- GPIO113_AC97_nRESET,
- GPIO95_GPIO,
-
- /* MMC */
- GPIO32_MMC_CLK,
- GPIO92_MMC_DAT_0,
- GPIO109_MMC_DAT_1,
- GPIO110_MMC_DAT_2,
- GPIO111_MMC_DAT_3,
- GPIO112_MMC_CMD,
-
- /* USB Host */
- GPIO88_USBH1_PWR,
- GPIO89_USBH1_PEN,
-
- /* PC Card */
- GPIO48_nPOE,
- GPIO49_nPWE,
- GPIO50_nPIOR,
- GPIO51_nPIOW,
- GPIO85_nPCE_1,
- GPIO54_nPCE_2,
- GPIO79_PSKTSEL,
- GPIO55_nPREG,
- GPIO56_nPWAIT,
- GPIO57_nIOIS16,
};
/******************************************************************************
@@ -132,6 +96,34 @@
early_param("balloon3_features", parse_balloon3_features);
/******************************************************************************
+ * Compact Flash slot
+ ******************************************************************************/
+#if defined(CONFIG_PCMCIA_PXA2XX) || defined(CONFIG_PCMCIA_PXA2XX_MODULE)
+static unsigned long balloon3_cf_pin_config[] __initdata = {
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO85_nPCE_1,
+ GPIO54_nPCE_2,
+ GPIO79_PSKTSEL,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+};
+
+static void __init balloon3_cf_init(void)
+{
+ if (!balloon3_has(BALLOON3_FEATURE_CF))
+ return;
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_cf_pin_config));
+}
+#else
+static inline void balloon3_cf_init(void) {}
+#endif
+
+/******************************************************************************
* NOR Flash
******************************************************************************/
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
@@ -179,6 +171,15 @@
******************************************************************************/
#if defined(CONFIG_TOUCHSCREEN_UCB1400) || \
defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
+static unsigned long balloon3_ac97_pin_config[] __initdata = {
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+ GPIO113_AC97_nRESET,
+ GPIO95_GPIO,
+};
+
static struct ucb1400_pdata vpac270_ucb1400_pdata = {
.irq = IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ),
};
@@ -197,6 +198,7 @@
if (!balloon3_has(BALLOON3_FEATURE_AUDIO))
return;
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ac97_pin_config));
pxa_set_ac97_info(NULL);
platform_device_register(&balloon3_ucb1400_device);
}
@@ -208,6 +210,11 @@
* Framebuffer
******************************************************************************/
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static unsigned long balloon3_lcd_pin_config[] __initdata = {
+ GPIOxx_LCD_TFT_16BPP,
+ GPIO99_GPIO,
+};
+
static struct pxafb_mode_info balloon3_lcd_modes[] = {
{
.pixclock = 38000,
@@ -242,6 +249,8 @@
if (!balloon3_has(BALLOON3_FEATURE_TOPPOLY))
return;
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_lcd_pin_config));
+
ret = gpio_request(BALLOON3_GPIO_RUN_BACKLIGHT, "BKL-ON");
if (ret) {
pr_err("Requesting BKL-ON GPIO failed!\n");
@@ -271,6 +280,15 @@
* SD/MMC card controller
******************************************************************************/
#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static unsigned long balloon3_mmc_pin_config[] __initdata = {
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+};
+
static struct pxamci_platform_data balloon3_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.gpio_card_detect = -1,
@@ -281,6 +299,7 @@
static void __init balloon3_mmc_init(void)
{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_mmc_pin_config));
pxa_set_mci_info(&balloon3_mci_platform_data);
}
#else
@@ -339,6 +358,11 @@
* USB Host
******************************************************************************/
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static unsigned long balloon3_uhc_pin_config[] __initdata = {
+ GPIO88_USBH1_PWR,
+ GPIO89_USBH1_PEN,
+};
+
static struct pxaohci_platform_data balloon3_ohci_info = {
.port_mode = PMM_PERPORT_MODE,
.flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
@@ -348,6 +372,7 @@
{
if (!balloon3_has(BALLOON3_FEATURE_OHCI))
return;
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_uhc_pin_config));
pxa_set_ohci_info(&balloon3_ohci_info);
}
#else
@@ -358,6 +383,11 @@
* LEDs
******************************************************************************/
#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static unsigned long balloon3_led_pin_config[] __initdata = {
+ GPIO9_GPIO, /* NAND activity LED */
+ GPIO10_GPIO, /* Heartbeat LED */
+};
+
struct gpio_led balloon3_gpio_leds[] = {
{
.name = "balloon3:green:idle",
@@ -436,6 +466,7 @@
static void __init balloon3_leds_init(void)
{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_led_pin_config));
platform_device_register(&balloon3_leds);
platform_device_register(&balloon3_pcf_leds);
}
@@ -757,6 +788,7 @@
balloon3_ts_init();
balloon3_udc_init();
balloon3_uhc_init();
+ balloon3_cf_init();
}
static struct map_desc balloon3_io_desc[] __initdata = {
@@ -779,6 +811,7 @@
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.map_io = balloon3_map_io,
+ .nr_irqs = BALLOON3_NR_IRQS,
.init_irq = balloon3_init_irq,
.timer = &pxa_timer,
.init_machine = balloon3_init,
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index bff6e78..ad40e7b 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -33,6 +33,9 @@
extern void cmx255_init(void);
extern void cmx270_init(void);
+/* reserve IRQs for IT8152 */
+#define CMX2XX_NR_IRQS (IRQ_BOARD_START + 40)
+
/* virtual addresses for statically mapped regions */
#define CMX2XX_VIRT_BASE (0xe8000000)
#define CMX2XX_IT8152_VIRT (CMX2XX_VIRT_BASE)
@@ -514,6 +517,7 @@
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.map_io = cmx2xx_map_io,
+ .nr_irqs = CMX2XX_NR_IRQS,
.init_irq = cmx2xx_init_irq,
.timer = &pxa_timer,
.init_machine = cmx2xx_init,
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index c70e6c2..8e0b562 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -19,6 +19,7 @@
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
+#include <linux/clk.h>
#include <linux/gpio.h>
#include <linux/dm9000.h>
@@ -50,6 +51,7 @@
#include <plat/i2c.h>
#include <plat/pxa3xx_nand.h>
#include <mach/audio.h>
+#include <mach/pxa3xx-u2d.h>
#include <asm/mach/map.h>
@@ -68,6 +70,8 @@
#define GPIO97_RTC_RD (97)
#define GPIO98_RTC_IO (98)
+#define GPIO_ULPI_PHY_RST (127)
+
static mfp_cfg_t cm_x3xx_mfp_cfg[] __initdata = {
/* LCD */
GPIO54_LCD_LDD_0,
@@ -472,6 +476,78 @@
static inline void cm_x300_init_mmc(void) {}
#endif
+#if defined(CONFIG_PXA310_ULPI)
+static struct clk *pout_clk;
+
+static int cm_x300_ulpi_phy_reset(void)
+{
+ int err;
+
+ /* reset the PHY */
+ err = gpio_request(GPIO_ULPI_PHY_RST, "ulpi reset");
+ if (err) {
+ pr_err("%s: failed to request ULPI reset GPIO: %d\n",
+ __func__, err);
+ return err;
+ }
+
+ gpio_direction_output(GPIO_ULPI_PHY_RST, 0);
+ msleep(10);
+ gpio_set_value(GPIO_ULPI_PHY_RST, 1);
+ msleep(10);
+
+ gpio_free(GPIO_ULPI_PHY_RST);
+
+ return 0;
+}
+
+static inline int cm_x300_u2d_init(struct device *dev)
+{
+ int err = 0;
+
+ if (cpu_is_pxa310()) {
+ /* CLK_POUT is connected to the ULPI PHY */
+ pout_clk = clk_get(NULL, "CLK_POUT");
+ if (IS_ERR(pout_clk)) {
+ err = PTR_ERR(pout_clk);
+ pr_err("%s: failed to get CLK_POUT: %d\n",
+ __func__, err);
+ return err;
+ }
+ clk_enable(pout_clk);
+
+ err = cm_x300_ulpi_phy_reset();
+ if (err) {
+ clk_disable(pout_clk);
+ clk_put(pout_clk);
+ }
+ }
+
+ return err;
+}
+
+static void cm_x300_u2d_exit(struct device *dev)
+{
+ if (cpu_is_pxa310()) {
+ clk_disable(pout_clk);
+ clk_put(pout_clk);
+ }
+}
+
+static struct pxa3xx_u2d_platform_data cm_x300_u2d_platform_data = {
+ .ulpi_mode = ULPI_SER_6PIN,
+ .init = cm_x300_u2d_init,
+ .exit = cm_x300_u2d_exit,
+};
+
+static void cm_x300_init_u2d(void)
+{
+ pxa3xx_set_u2d_info(&cm_x300_u2d_platform_data);
+}
+#else
+static inline void cm_x300_init_u2d(void) {}
+#endif
+
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
static int cm_x300_ohci_init(struct device *dev)
{
@@ -754,6 +830,7 @@
cm_x300_init_da9030();
cm_x300_init_dm9000();
cm_x300_init_lcd();
+ cm_x300_init_u2d();
cm_x300_init_ohci();
cm_x300_init_mmc();
cm_x300_init_nand();
diff --git a/arch/arm/mach-pxa/cpufreq-pxa3xx.c b/arch/arm/mach-pxa/cpufreq-pxa3xx.c
index 0a0d0fe..88fbec0 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa3xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa3xx.c
@@ -159,7 +159,7 @@
static unsigned int pxa3xx_cpufreq_get(unsigned int cpu)
{
- return get_clk_frequency_khz(0);
+ return pxa3xx_get_clk_frequency_khz(0);
}
static int pxa3xx_cpufreq_set(struct cpufreq_policy *policy,
@@ -212,7 +212,8 @@
policy->cpuinfo.min_freq = 104000;
policy->cpuinfo.max_freq = (cpu_is_pxa320()) ? 806000 : 624000;
policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
- policy->cur = policy->min = policy->max = get_clk_frequency_khz(0);
+ policy->max = pxa3xx_get_clk_frequency_khz(0);
+ policy->cur = policy->min = policy->max;
if (cpu_is_pxa300() || cpu_is_pxa310())
ret = setup_freqs_table(policy, ARRAY_AND_SIZE(pxa300_freqs));
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 65447dc..08b4103 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -6,11 +6,12 @@
#include <asm/pmu.h>
#include <mach/udc.h>
+#include <mach/pxa3xx-u2d.h>
#include <mach/pxafb.h>
#include <mach/mmc.h>
#include <mach/irda.h>
#include <mach/ohci.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
#include <mach/pxa2xx_spi.h>
#include <mach/camera.h>
#include <mach/audio.h>
@@ -134,6 +135,33 @@
}
};
+#ifdef CONFIG_PXA3xx
+static struct resource pxa3xx_u2d_resources[] = {
+ [0] = {
+ .start = 0x54100000,
+ .end = 0x54100fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_USB2,
+ .end = IRQ_USB2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device pxa3xx_device_u2d = {
+ .name = "pxa3xx-u2d",
+ .id = -1,
+ .resource = pxa3xx_u2d_resources,
+ .num_resources = ARRAY_SIZE(pxa3xx_u2d_resources),
+};
+
+void __init pxa3xx_set_u2d_info(struct pxa3xx_u2d_platform_data *info)
+{
+ pxa_register_device(&pxa3xx_device_u2d, info);
+}
+#endif /* CONFIG_PXA3xx */
+
static struct resource pxafb_resources[] = {
[0] = {
.start = 0x44000000,
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
index 50353ea..715e8bd 100644
--- a/arch/arm/mach-pxa/devices.h
+++ b/arch/arm/mach-pxa/devices.h
@@ -4,6 +4,7 @@
extern struct platform_device pxa3xx_device_mci3;
extern struct platform_device pxa25x_device_udc;
extern struct platform_device pxa27x_device_udc;
+extern struct platform_device pxa3xx_device_u2d;
extern struct platform_device pxa_device_fb;
extern struct platform_device pxa_device_ffuart;
extern struct platform_device pxa_device_btuart;
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 0517c17..51286a7 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -43,7 +43,7 @@
#include <mach/pxafb.h>
#include <mach/ohci.h>
#include <mach/mmc.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
#include <plat/i2c.h>
#include <mach/camera.h>
#include <mach/pxa2xx_spi.h>
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index 349212a..4971ce1 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -29,6 +29,7 @@
#include <mach/pxa25x.h>
#include <mach/eseries-gpio.h>
+#include <mach/eseries-irq.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
#include <mach/udc.h>
@@ -183,6 +184,7 @@
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
+ .nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
.fixup = eseries_fixup,
.init_machine = e330_init,
@@ -233,6 +235,7 @@
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
+ .nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
.fixup = eseries_fixup,
.init_machine = e350_init,
@@ -356,6 +359,7 @@
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
+ .nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
.fixup = eseries_fixup,
.init_machine = e400_init,
@@ -545,6 +549,7 @@
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
+ .nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
.fixup = eseries_fixup,
.init_machine = e740_init,
@@ -737,6 +742,7 @@
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
+ .nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
.fixup = eseries_fixup,
.init_machine = e750_init,
@@ -933,6 +939,7 @@
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
+ .nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
.fixup = eseries_fixup,
.init_machine = e800_init,
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 626c82b..f997e84 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -32,12 +32,14 @@
#include <mach/ohci.h>
#include <plat/i2c.h>
#include <mach/hardware.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
#include <mach/camera.h>
#include "devices.h"
#include "generic.h"
+#define EZX_NR_IRQS (IRQ_BOARD_START + 24)
+
#define GPIO12_A780_FLIP_LID 12
#define GPIO15_A1200_FLIP_LID 15
#define GPIO15_A910_FLIP_LID 15
@@ -800,6 +802,7 @@
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
+ .nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = a780_init,
@@ -866,6 +869,7 @@
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
+ .nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = e680_init,
@@ -932,6 +936,7 @@
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
+ .nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = a1200_init,
@@ -1124,6 +1129,7 @@
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
+ .nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = a910_init,
@@ -1190,6 +1196,7 @@
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
+ .nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = e6_init,
@@ -1230,6 +1237,7 @@
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
+ .nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = e2_init,
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index baabb3c..6451e9c 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -66,8 +66,7 @@
return pxa25x_get_clk_frequency_khz(info);
else if (cpu_is_pxa27x())
return pxa27x_get_clk_frequency_khz(info);
- else
- return pxa3xx_get_clk_frequency_khz(info);
+ return 0;
}
EXPORT_SYMBOL(get_clk_frequency_khz);
@@ -80,8 +79,7 @@
return pxa25x_get_memclk_frequency_10khz();
else if (cpu_is_pxa27x())
return pxa27x_get_memclk_frequency_10khz();
- else
- return pxa3xx_get_memclk_frequency_10khz();
+ return 0;
}
EXPORT_SYMBOL(get_memclk_frequency_10khz);
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index c6305c5..4b1ad27 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -54,11 +54,9 @@
#ifdef CONFIG_PXA3xx
extern unsigned pxa3xx_get_clk_frequency_khz(int);
-extern unsigned pxa3xx_get_memclk_frequency_10khz(void);
extern void pxa3xx_clear_reset_status(unsigned int);
#else
#define pxa3xx_get_clk_frequency_khz(x) (0)
-#define pxa3xx_get_memclk_frequency_10khz() (0)
static inline void pxa3xx_clear_reset_status(unsigned int mask) {}
#endif
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 848c861..10104f1 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -874,6 +874,7 @@
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
+ .nr_irqs = HX4700_NR_IRQS,
.init_irq = pxa27x_init_irq,
.init_machine = hx4700_init,
.timer = &pxa_timer,
diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h
index eec92e6..561562b 100644
--- a/arch/arm/mach-pxa/include/mach/balloon3.h
+++ b/arch/arm/mach-pxa/include/mach/balloon3.h
@@ -174,6 +174,8 @@
#define BALLOON3_CODEC_IRQ IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ)
#define BALLOON3_S0_CD_IRQ IRQ_GPIO(BALLOON3_GPIO_S0_CD)
+#define BALLOON3_NR_IRQS (IRQ_BOARD_START + 4)
+
extern int balloon3_has(enum balloon3_features feature);
#endif
diff --git a/arch/arm/mach-pxa/include/mach/eseries-irq.h b/arch/arm/mach-pxa/include/mach/eseries-irq.h
index f2a93d5..de292b2 100644
--- a/arch/arm/mach-pxa/include/mach/eseries-irq.h
+++ b/arch/arm/mach-pxa/include/mach/eseries-irq.h
@@ -25,3 +25,4 @@
#define TMIO_SD_IRQ IRQ_TMIO(1)
#define TMIO_USB_IRQ IRQ_TMIO(2)
+#define ESERIES_NR_IRQS (IRQ_BOARD_START + 16)
diff --git a/arch/arm/mach-pxa/include/mach/hx4700.h b/arch/arm/mach-pxa/include/mach/hx4700.h
index 9eaeed1..3740844 100644
--- a/arch/arm/mach-pxa/include/mach/hx4700.h
+++ b/arch/arm/mach-pxa/include/mach/hx4700.h
@@ -17,6 +17,7 @@
#define HX4700_ASIC3_GPIO_BASE NR_BUILTIN_GPIO
#define HX4700_EGPIO_BASE (HX4700_ASIC3_GPIO_BASE + ASIC3_NUM_GPIOS)
+#define HX4700_NR_IRQS (IRQ_BOARD_START + 70)
/*
* PXA GPIOs
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index ffc8314..d372caa 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -117,48 +117,12 @@
/*
* The following interrupts are for board specific purposes. Since
* the kernel can only run on one machine at a time, we can re-use
- * these. There will be 16 IRQs by default. If it is not enough,
- * IRQ_BOARD_END is allowed be customized for each board, but keep
- * the numbers within sensible limits and in descending order, so
- * when multiple config options are selected, the maximum will be
- * used.
+ * these.
+ * By default, no board IRQ is reserved. It should be finished in
+ * custom board since sparse IRQ is already enabled.
*/
#define IRQ_BOARD_START (PXA_GPIO_IRQ_BASE + PXA_GPIO_IRQ_NUM)
-#if defined(CONFIG_MACH_H4700)
-#define IRQ_BOARD_END (IRQ_BOARD_START + 70)
-#elif defined(CONFIG_MACH_ZYLONITE)
-#define IRQ_BOARD_END (IRQ_BOARD_START + 32)
-#elif defined(CONFIG_PXA_EZX)
-#define IRQ_BOARD_END (IRQ_BOARD_START + 23)
-#else
-#define IRQ_BOARD_END (IRQ_BOARD_START + 16)
-#endif
-
-/*
- * Figure out the MAX IRQ number.
- *
- * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1.
- * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1
- * Otherwise, we have the standard IRQs only.
- */
-#ifdef CONFIG_SA1111
-#define NR_IRQS (IRQ_BOARD_END + 55)
-#elif defined(CONFIG_PXA_HAVE_BOARD_IRQS)
-#define NR_IRQS (IRQ_BOARD_END)
-#else
#define NR_IRQS (IRQ_BOARD_START)
-#endif
-
-/* add IT8152 IRQs beyond BOARD_END */
-#ifdef CONFIG_PCI_HOST_ITE8152
-#define IT8152_LAST_IRQ (IRQ_BOARD_END + 40)
-
-#if NR_IRQS < (IT8152_LAST_IRQ+1)
-#undef NR_IRQS
-#define NR_IRQS (IT8152_LAST_IRQ+1)
-#endif
-
-#endif /* CONFIG_PCI_HOST_ITE8152 */
#endif /* __ASM_MACH_IRQS_H */
diff --git a/arch/arm/mach-pxa/include/mach/littleton.h b/arch/arm/mach-pxa/include/mach/littleton.h
index 6c9b21c..2a5726c 100644
--- a/arch/arm/mach-pxa/include/mach/littleton.h
+++ b/arch/arm/mach-pxa/include/mach/littleton.h
@@ -10,4 +10,6 @@
#define EXT0_GPIO_BASE (NR_BUILTIN_GPIO)
#define EXT0_GPIO(x) (EXT0_GPIO_BASE + (x))
+#define LITTLETON_NR_IRQS (IRQ_BOARD_START + 8)
+
#endif /* __ASM_ARCH_LITTLETON_H */
diff --git a/arch/arm/mach-pxa/include/mach/lpd270.h b/arch/arm/mach-pxa/include/mach/lpd270.h
index 0e6440c..cd07009 100644
--- a/arch/arm/mach-pxa/include/mach/lpd270.h
+++ b/arch/arm/mach-pxa/include/mach/lpd270.h
@@ -38,5 +38,6 @@
#define LPD270_USBC_IRQ LPD270_IRQ(2)
#define LPD270_ETHERNET_IRQ LPD270_IRQ(3)
#define LPD270_AC97_IRQ LPD270_IRQ(4)
+#define LPD270_NR_IRQS (IRQ_BOARD_START + 5)
#endif
diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/include/mach/lubbock.h
index a0d4247..2a086e8 100644
--- a/arch/arm/mach-pxa/include/mach/lubbock.h
+++ b/arch/arm/mach-pxa/include/mach/lubbock.h
@@ -45,6 +45,9 @@
#define LUBBOCK_USB_DISC_IRQ LUBBOCK_IRQ(6) /* usb disconnect */
#define LUBBOCK_LAST_IRQ LUBBOCK_IRQ(6)
+#define LUBBOCK_SA1111_IRQ_BASE (IRQ_BOARD_START + 16)
+#define LUBBOCK_NR_IRQS (IRQ_BOARD_START + 16 + 55)
+
#ifndef __ASSEMBLY__
extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set);
#endif
diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h
index 20ef37d..0a2efcf 100644
--- a/arch/arm/mach-pxa/include/mach/magician.h
+++ b/arch/arm/mach-pxa/include/mach/magician.h
@@ -71,6 +71,8 @@
#define IRQ_MAGICIAN_BT (IRQ_BOARD_START + 2)
#define IRQ_MAGICIAN_VBUS (IRQ_BOARD_START + 3)
+#define MAGICIAN_NR_IRQS (IRQ_BOARD_START + 8)
+
/*
* CPLD EGPIOs
*/
diff --git a/arch/arm/mach-pxa/include/mach/mainstone.h b/arch/arm/mach-pxa/include/mach/mainstone.h
index 86e623a..4c2d11c 100644
--- a/arch/arm/mach-pxa/include/mach/mainstone.h
+++ b/arch/arm/mach-pxa/include/mach/mainstone.h
@@ -134,4 +134,6 @@
#define MAINSTONE_S1_STSCHG_IRQ MAINSTONE_IRQ(14)
#define MAINSTONE_S1_IRQ MAINSTONE_IRQ(15)
+#define MAINSTONE_NR_IRQS (IRQ_BOARD_START + 16)
+
#endif
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa930.h b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
index 0d119d3..04f7c97 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
@@ -69,6 +69,7 @@
#define nBE0_GPIO_60 MFP_CFG(nBE0, AF0)
#define nBE1_GPIO_61 MFP_CFG(nBE1, AF0)
#define RDY_GPIO_62 MFP_CFG(RDY, AF0)
+#define PMIC_INT_GPIO83 MFP_CFG_LPM(PMIC_INT, AF0, PULL_HIGH)
/* Chip Select */
#define DF_nCS0_nCS2 MFP_CFG_LPM(DF_nCS0, AF3, PULL_HIGH)
@@ -92,6 +93,9 @@
#define GPIO63_CI2C_SCL MFP_CFG_LPM(GPIO63, AF4, PULL_HIGH)
#define GPIO64_CI2C_SDA MFP_CFG_LPM(GPIO64, AF4, PULL_HIGH)
+#define GPIO73_CI2C_SCL MFP_CFG_LPM(GPIO73, AF1, PULL_HIGH)
+#define GPIO74_CI2C_SDA MFP_CFG_LPM(GPIO74, AF1, PULL_HIGH)
+
#define GPIO77_CI2C_SCL MFP_CFG_LPM(GPIO77, AF2, PULL_HIGH)
#define GPIO78_CI2C_SDA MFP_CFG_LPM(GPIO78, AF2, PULL_HIGH)
@@ -345,6 +349,9 @@
#define GPIO69_UART1_CTS MFP_CFG(GPIO69, AF2)
#define GPIO70_UART1_RTS MFP_CFG(GPIO70, AF2)
+#define GPIO53_UART1_TXD MFP_CFG(GPIO53, AF2)
+#define GPIO54_UART1_RXD MFP_CFG(GPIO54, AF2)
+
/* UART2 - BTUART */
#define GPIO91_UART2_RXD MFP_CFG(GPIO91, AF1)
#define GPIO92_UART2_TXD MFP_CFG(GPIO92, AF1)
diff --git a/arch/arm/mach-pxa/include/mach/pcm027.h b/arch/arm/mach-pxa/include/mach/pcm027.h
index 0408326..4bac588 100644
--- a/arch/arm/mach-pxa/include/mach/pcm027.h
+++ b/arch/arm/mach-pxa/include/mach/pcm027.h
@@ -30,6 +30,8 @@
#define PCM027_MMCDET_IRQ PCM027_IRQ(2)
#define PCM027_PM_5V_IRQ PCM027_IRQ(3)
+#define PCM027_NR_IRQS (IRQ_BOARD_START + 32)
+
/* I2C RTC */
#define PCM027_RTC_IRQ_GPIO 0
#define PCM027_RTC_IRQ IRQ_GPIO(PCM027_RTC_IRQ_GPIO)
diff --git a/arch/arm/mach-pxa/include/mach/poodle.h b/arch/arm/mach-pxa/include/mach/poodle.h
index 0b3e6d0..83d1cfd 100644
--- a/arch/arm/mach-pxa/include/mach/poodle.h
+++ b/arch/arm/mach-pxa/include/mach/poodle.h
@@ -85,6 +85,8 @@
#define POODLE_LOCOMO_GPIO_232VCC_ON LOCOMO_GPIO(12)
#define POODLE_LOCOMO_GPIO_JK_B LOCOMO_GPIO(13)
+#define POODLE_NR_IRQS (IRQ_BOARD_START + 4) /* 4 for LoCoMo */
+
extern struct platform_device poodle_locomo_device;
#endif /* __ASM_ARCH_POODLE_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h b/arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h
new file mode 100644
index 0000000..9d82cb6
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h
@@ -0,0 +1,35 @@
+/*
+ * PXA3xx U2D header
+ *
+ * Copyright (C) 2010 CompuLab Ltd.
+ *
+ * Igor Grinberg <grinberg@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __PXA310_U2D__
+#define __PXA310_U2D__
+
+#include <linux/usb/ulpi.h>
+
+struct pxa3xx_u2d_platform_data {
+
+#define ULPI_SER_6PIN (1 << 0)
+#define ULPI_SER_3PIN (1 << 1)
+ unsigned int ulpi_mode;
+
+ int (*init)(struct device *);
+ void (*exit)(struct device *);
+};
+
+
+/* Start PXA3xx U2D host */
+int pxa3xx_u2d_start_hc(struct usb_bus *host);
+/* Stop PXA3xx U2D host */
+void pxa3xx_u2d_stop_hc(struct usb_bus *host);
+
+extern void pxa3xx_set_u2d_info(struct pxa3xx_u2d_platform_data *info);
+
+#endif /* __PXA310_U2D__ */
diff --git a/arch/arm/mach-pxa/include/mach/tosa.h b/arch/arm/mach-pxa/include/mach/tosa.h
index 1bbd1f2..1272c4b 100644
--- a/arch/arm/mach-pxa/include/mach/tosa.h
+++ b/arch/arm/mach-pxa/include/mach/tosa.h
@@ -20,6 +20,7 @@
/* Jacket Scoop */
#define TOSA_SCOOP_PHYS (PXA_CS5_PHYS + 0x00800000)
+#define TOSA_NR_IRQS (IRQ_BOARD_START + TC6393XB_NR_IRQS)
/*
* SCOOP2 internal GPIOs
*/
diff --git a/arch/arm/mach-pxa/include/mach/zeus.h b/arch/arm/mach-pxa/include/mach/zeus.h
index 6e11997..faa408a 100644
--- a/arch/arm/mach-pxa/include/mach/zeus.h
+++ b/arch/arm/mach-pxa/include/mach/zeus.h
@@ -15,6 +15,8 @@
#ifndef _MACH_ZEUS_H
#define _MACH_ZEUS_H
+#define ZEUS_NR_IRQS (IRQ_BOARD_START + 48)
+
/* Physical addresses */
#define ZEUS_FLASH_PHYS PXA_CS0_PHYS
#define ZEUS_ETH0_PHYS PXA_CS1_PHYS
diff --git a/arch/arm/mach-pxa/include/mach/zylonite.h b/arch/arm/mach-pxa/include/mach/zylonite.h
index 9edf645..ea24998 100644
--- a/arch/arm/mach-pxa/include/mach/zylonite.h
+++ b/arch/arm/mach-pxa/include/mach/zylonite.h
@@ -5,6 +5,8 @@
#define EXT_GPIO(x) (128 + (x))
+#define ZYLONITE_NR_IRQS (IRQ_BOARD_START + 32)
+
/* the following variables are processor specific and initialized
* by the corresponding zylonite_pxa3xx_init()
*/
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 9b90461..eb58506 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -43,7 +43,7 @@
#include <mach/pxafb.h>
#include <mach/mmc.h>
#include <mach/pxa2xx_spi.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
#include <mach/littleton.h>
#include <plat/i2c.h>
#include <plat/pxa3xx_nand.h>
@@ -441,6 +441,7 @@
.boot_params = 0xa0000100,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.map_io = pxa_map_io,
+ .nr_irqs = LITTLETON_NR_IRQS,
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
.init_machine = littleton_init,
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index d279507..fc9502e 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -509,6 +509,7 @@
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.boot_params = 0xa0000100,
.map_io = lpd270_map_io,
+ .nr_irqs = LPD270_NR_IRQS,
.init_irq = lpd270_init_irq,
.timer = &pxa_timer,
.init_machine = lpd270_init,
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 330c328..1956c23 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -229,7 +229,7 @@
};
static struct sa1111_platform_data sa1111_info = {
- .irq_base = IRQ_BOARD_END,
+ .irq_base = LUBBOCK_SA1111_IRQ_BASE,
};
static struct platform_device sa1111_device = {
@@ -560,6 +560,7 @@
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.map_io = lubbock_map_io,
+ .nr_irqs = LUBBOCK_NR_IRQS,
.init_irq = lubbock_init_irq,
.timer = &pxa_timer,
.init_machine = lubbock_init,
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index e81dd0c..42a0c2b 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -768,6 +768,7 @@
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
+ .nr_irqs = MAGICIAN_NR_IRQS,
.init_irq = pxa27x_init_irq,
.init_machine = magician_init,
.timer = &pxa_timer,
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 5543c64..8b71002 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -50,7 +50,7 @@
#include <mach/mmc.h>
#include <mach/irda.h>
#include <mach/ohci.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
#include "generic.h"
#include "devices.h"
@@ -628,6 +628,7 @@
.boot_params = 0xa0000100, /* BLOB boot parameter setting */
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.map_io = mainstone_map_io,
+ .nr_irqs = MAINSTONE_NR_IRQS,
.init_irq = mainstone_init_irq,
.timer = &pxa_timer,
.init_machine = mainstone_init,
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index dc66942..ffb3f5a 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -45,7 +45,7 @@
#include <mach/pxa27x.h>
#include <mach/regs-rtc.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
#include <mach/pxafb.h>
#include <mach/mmc.h>
#include <mach/udc.h>
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 91038ee..3ff0c4a 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -39,7 +39,7 @@
#include <mach/mmc.h>
#include <mach/pxafb.h>
#include <mach/irda.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
#include <mach/palmasoc.h>
#include <mach/palm27x.h>
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 1c28199..5b9f766 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -39,7 +39,7 @@
#include <mach/mmc.h>
#include <mach/pxafb.h>
#include <mach/irda.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
#include <mach/udc.h>
#include <mach/palmasoc.h>
#include <mach/palm27x.h>
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index 52defd5..f685a60 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -39,7 +39,7 @@
#include <mach/mmc.h>
#include <mach/pxafb.h>
#include <mach/irda.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
#include <mach/udc.h>
#include <mach/ohci.h>
#include <mach/pxa2xx-regs.h>
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 144dc2b..89a3792 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -43,7 +43,7 @@
#include <mach/mmc.h>
#include <mach/pxafb.h>
#include <mach/irda.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
#include <mach/udc.h>
#include <mach/palmasoc.h>
#include <mach/palm27x.h>
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 87e4b10..38f4425 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -41,7 +41,7 @@
#include <mach/mmc.h>
#include <mach/pxafb.h>
#include <mach/irda.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
#include <mach/udc.h>
#include <mach/palmasoc.h>
#include <mach/palm27x.h>
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index 2190af0..90b08ba 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -262,6 +262,7 @@
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.map_io = pcm027_map_io,
+ .nr_irqs = PCM027_NR_IRQS,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = pcm027_init,
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 55e8fcd..c04e025 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -469,6 +469,7 @@
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.fixup = fixup_poodle,
.map_io = pxa_map_io,
+ .nr_irqs = POODLE_NR_IRQS, /* 4 for LoCoMo */
.init_irq = pxa25x_init_irq,
.timer = &pxa_timer,
.init_machine = poodle_init,
diff --git a/arch/arm/mach-pxa/pxa3xx-ulpi.c b/arch/arm/mach-pxa/pxa3xx-ulpi.c
new file mode 100644
index 0000000..ce7168b
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa3xx-ulpi.c
@@ -0,0 +1,400 @@
+/*
+ * linux/arch/arm/mach-pxa/pxa3xx-ulpi.c
+ *
+ * code specific to pxa3xx aka Monahans
+ *
+ * Copyright (C) 2010 CompuLab Ltd.
+ *
+ * 2010-13-07: Igor Grinberg <grinberg@compulab.co.il>
+ * initial version: pxa310 USB Host mode support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/usb.h>
+#include <linux/usb/otg.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-u2d.h>
+#include <mach/pxa3xx-u2d.h>
+
+struct pxa3xx_u2d_ulpi {
+ struct clk *clk;
+ void __iomem *mmio_base;
+
+ struct otg_transceiver *otg;
+ unsigned int ulpi_mode;
+};
+
+static struct pxa3xx_u2d_ulpi *u2d;
+
+static inline u32 u2d_readl(u32 reg)
+{
+ return __raw_readl(u2d->mmio_base + reg);
+}
+
+static inline void u2d_writel(u32 reg, u32 val)
+{
+ __raw_writel(val, u2d->mmio_base + reg);
+}
+
+#if defined(CONFIG_PXA310_ULPI)
+enum u2d_ulpi_phy_mode {
+ SYNCH = 0,
+ CARKIT = (1 << 0),
+ SER_3PIN = (1 << 1),
+ SER_6PIN = (1 << 2),
+ LOWPOWER = (1 << 3),
+};
+
+static inline enum u2d_ulpi_phy_mode pxa310_ulpi_get_phymode(void)
+{
+ return (u2d_readl(U2DOTGUSR) >> 28) & 0xF;
+}
+
+static int pxa310_ulpi_poll(void)
+{
+ int timeout = 50000;
+
+ while (timeout--) {
+ if (!(u2d_readl(U2DOTGUCR) & U2DOTGUCR_RUN))
+ return 0;
+
+ cpu_relax();
+ }
+
+ pr_warning("%s: ULPI access timed out!\n", __func__);
+
+ return -ETIMEDOUT;
+}
+
+static int pxa310_ulpi_read(struct otg_transceiver *otg, u32 reg)
+{
+ int err;
+
+ if (pxa310_ulpi_get_phymode() != SYNCH) {
+ pr_warning("%s: PHY is not in SYNCH mode!\n", __func__);
+ return -EBUSY;
+ }
+
+ u2d_writel(U2DOTGUCR, U2DOTGUCR_RUN | U2DOTGUCR_RNW | (reg << 16));
+ msleep(5);
+
+ err = pxa310_ulpi_poll();
+ if (err)
+ return err;
+
+ return u2d_readl(U2DOTGUCR) & U2DOTGUCR_RDATA;
+}
+
+static int pxa310_ulpi_write(struct otg_transceiver *otg, u32 val, u32 reg)
+{
+ if (pxa310_ulpi_get_phymode() != SYNCH) {
+ pr_warning("%s: PHY is not in SYNCH mode!\n", __func__);
+ return -EBUSY;
+ }
+
+ u2d_writel(U2DOTGUCR, U2DOTGUCR_RUN | (reg << 16) | (val << 8));
+ msleep(5);
+
+ return pxa310_ulpi_poll();
+}
+
+struct otg_io_access_ops pxa310_ulpi_access_ops = {
+ .read = pxa310_ulpi_read,
+ .write = pxa310_ulpi_write,
+};
+
+static void pxa310_otg_transceiver_rtsm(void)
+{
+ u32 u2dotgcr;
+
+ /* put PHY to sync mode */
+ u2dotgcr = u2d_readl(U2DOTGCR);
+ u2dotgcr |= U2DOTGCR_RTSM | U2DOTGCR_UTMID;
+ u2d_writel(U2DOTGCR, u2dotgcr);
+ msleep(10);
+
+ /* setup OTG sync mode */
+ u2dotgcr = u2d_readl(U2DOTGCR);
+ u2dotgcr |= U2DOTGCR_ULAF;
+ u2dotgcr &= ~(U2DOTGCR_SMAF | U2DOTGCR_CKAF);
+ u2d_writel(U2DOTGCR, u2dotgcr);
+}
+
+static int pxa310_start_otg_host_transcvr(struct usb_bus *host)
+{
+ int err;
+
+ pxa310_otg_transceiver_rtsm();
+
+ err = otg_init(u2d->otg);
+ if (err) {
+ pr_err("OTG transceiver init failed");
+ return err;
+ }
+
+ err = otg_set_vbus(u2d->otg, 1);
+ if (err) {
+ pr_err("OTG transceiver VBUS set failed");
+ return err;
+ }
+
+ err = otg_set_host(u2d->otg, host);
+ if (err)
+ pr_err("OTG transceiver Host mode set failed");
+
+ return err;
+}
+
+static int pxa310_start_otg_hc(struct usb_bus *host)
+{
+ u32 u2dotgcr;
+ int err;
+
+ /* disable USB device controller */
+ u2d_writel(U2DCR, u2d_readl(U2DCR) & ~U2DCR_UDE);
+ u2d_writel(U2DOTGCR, u2d_readl(U2DOTGCR) | U2DOTGCR_UTMID);
+ u2d_writel(U2DOTGICR, u2d_readl(U2DOTGICR) & ~0x37F7F);
+
+ err = pxa310_start_otg_host_transcvr(host);
+ if (err)
+ return err;
+
+ /* set xceiver mode */
+ if (u2d->ulpi_mode & ULPI_IC_6PIN_SERIAL)
+ u2d_writel(U2DP3CR, u2d_readl(U2DP3CR) & ~U2DP3CR_P2SS);
+ else if (u2d->ulpi_mode & ULPI_IC_3PIN_SERIAL)
+ u2d_writel(U2DP3CR, u2d_readl(U2DP3CR) | U2DP3CR_P2SS);
+
+ /* start OTG host controller */
+ u2dotgcr = u2d_readl(U2DOTGCR) | U2DOTGCR_SMAF;
+ u2d_writel(U2DOTGCR, u2dotgcr & ~(U2DOTGCR_ULAF | U2DOTGCR_CKAF));
+
+ return 0;
+}
+
+static void pxa310_stop_otg_hc(void)
+{
+ pxa310_otg_transceiver_rtsm();
+
+ otg_set_host(u2d->otg, NULL);
+ otg_set_vbus(u2d->otg, 0);
+ otg_shutdown(u2d->otg);
+}
+
+static void pxa310_u2d_setup_otg_hc(void)
+{
+ u32 u2dotgcr;
+
+ u2dotgcr = u2d_readl(U2DOTGCR);
+ u2dotgcr |= U2DOTGCR_ULAF | U2DOTGCR_UTMID;
+ u2dotgcr &= ~(U2DOTGCR_SMAF | U2DOTGCR_CKAF);
+ u2d_writel(U2DOTGCR, u2dotgcr);
+ msleep(5);
+ u2d_writel(U2DOTGCR, u2dotgcr | U2DOTGCR_ULE);
+ msleep(5);
+ u2d_writel(U2DOTGICR, u2d_readl(U2DOTGICR) & ~0x37F7F);
+}
+
+static int pxa310_otg_init(struct pxa3xx_u2d_platform_data *pdata)
+{
+ unsigned int ulpi_mode = ULPI_OTG_DRVVBUS;
+
+ if (pdata) {
+ if (pdata->ulpi_mode & ULPI_SER_6PIN)
+ ulpi_mode |= ULPI_IC_6PIN_SERIAL;
+ else if (pdata->ulpi_mode & ULPI_SER_3PIN)
+ ulpi_mode |= ULPI_IC_3PIN_SERIAL;
+ }
+
+ u2d->ulpi_mode = ulpi_mode;
+
+ u2d->otg = otg_ulpi_create(&pxa310_ulpi_access_ops, ulpi_mode);
+ if (!u2d->otg)
+ return -ENOMEM;
+
+ u2d->otg->io_priv = u2d->mmio_base;
+
+ return 0;
+}
+
+static void pxa310_otg_exit(void)
+{
+ kfree(u2d->otg);
+}
+#else
+static inline void pxa310_u2d_setup_otg_hc(void) {}
+static inline int pxa310_start_otg_hc(struct usb_bus *host)
+{
+ return 0;
+}
+static inline void pxa310_stop_otg_hc(void) {}
+static inline int pxa310_otg_init(struct pxa3xx_u2d_platform_data *pdata)
+{
+ return 0;
+}
+static inline void pxa310_otg_exit(void) {}
+#endif /* CONFIG_PXA310_ULPI */
+
+int pxa3xx_u2d_start_hc(struct usb_bus *host)
+{
+ int err = 0;
+
+ /* In case the PXA3xx ULPI isn't used, do nothing. */
+ if (!u2d)
+ return 0;
+
+ clk_enable(u2d->clk);
+
+ if (cpu_is_pxa310()) {
+ pxa310_u2d_setup_otg_hc();
+ err = pxa310_start_otg_hc(host);
+ }
+
+ return err;
+}
+
+void pxa3xx_u2d_stop_hc(struct usb_bus *host)
+{
+ /* In case the PXA3xx ULPI isn't used, do nothing. */
+ if (!u2d)
+ return;
+
+ if (cpu_is_pxa310())
+ pxa310_stop_otg_hc();
+
+ clk_disable(u2d->clk);
+}
+
+static int pxa3xx_u2d_probe(struct platform_device *pdev)
+{
+ struct pxa3xx_u2d_platform_data *pdata = pdev->dev.platform_data;
+ struct resource *r;
+ int err;
+
+ u2d = kzalloc(sizeof(struct pxa3xx_u2d_ulpi), GFP_KERNEL);
+ if (!u2d) {
+ dev_err(&pdev->dev, "failed to allocate memory\n");
+ return -ENOMEM;
+ }
+
+ u2d->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(u2d->clk)) {
+ dev_err(&pdev->dev, "failed to get u2d clock\n");
+ err = PTR_ERR(u2d->clk);
+ goto err_free_mem;
+ }
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!r) {
+ dev_err(&pdev->dev, "no IO memory resource defined\n");
+ err = -ENODEV;
+ goto err_put_clk;
+ }
+
+ r = request_mem_region(r->start, resource_size(r), pdev->name);
+ if (!r) {
+ dev_err(&pdev->dev, "failed to request memory resource\n");
+ err = -EBUSY;
+ goto err_put_clk;
+ }
+
+ u2d->mmio_base = ioremap(r->start, resource_size(r));
+ if (!u2d->mmio_base) {
+ dev_err(&pdev->dev, "ioremap() failed\n");
+ err = -ENODEV;
+ goto err_free_res;
+ }
+
+ if (pdata->init) {
+ err = pdata->init(&pdev->dev);
+ if (err)
+ goto err_free_io;
+ }
+
+ /* Only PXA310 U2D has OTG functionality */
+ if (cpu_is_pxa310()) {
+ err = pxa310_otg_init(pdata);
+ if (err)
+ goto err_free_plat;
+ }
+
+ platform_set_drvdata(pdev, &u2d);
+
+ return 0;
+
+err_free_plat:
+ if (pdata->exit)
+ pdata->exit(&pdev->dev);
+err_free_io:
+ iounmap(u2d->mmio_base);
+err_free_res:
+ release_mem_region(r->start, resource_size(r));
+err_put_clk:
+ clk_put(u2d->clk);
+err_free_mem:
+ kfree(u2d);
+ return err;
+}
+
+static int pxa3xx_u2d_remove(struct platform_device *pdev)
+{
+ struct pxa3xx_u2d_platform_data *pdata = pdev->dev.platform_data;
+ struct resource *r;
+
+ if (cpu_is_pxa310()) {
+ pxa310_stop_otg_hc();
+ pxa310_otg_exit();
+ }
+
+ if (pdata->exit)
+ pdata->exit(&pdev->dev);
+
+ platform_set_drvdata(pdev, NULL);
+ iounmap(u2d->mmio_base);
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(r->start, resource_size(r));
+
+ clk_put(u2d->clk);
+
+ kfree(u2d);
+
+ return 0;
+}
+
+static struct platform_driver pxa3xx_u2d_ulpi_driver = {
+ .driver = {
+ .name = "pxa3xx-u2d",
+ .owner = THIS_MODULE,
+ },
+ .probe = pxa3xx_u2d_probe,
+ .remove = pxa3xx_u2d_remove,
+};
+
+static int pxa3xx_u2d_ulpi_init(void)
+{
+ return platform_driver_register(&pxa3xx_u2d_ulpi_driver);
+}
+module_init(pxa3xx_u2d_ulpi_init);
+
+static void __exit pxa3xx_u2d_ulpi_exit(void)
+{
+ platform_driver_unregister(&pxa3xx_u2d_ulpi_driver);
+}
+module_exit(pxa3xx_u2d_ulpi_exit);
+
+MODULE_DESCRIPTION("PXA3xx U2D ULPI driver");
+MODULE_AUTHOR("Igor Grinberg");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index fa00148..c85c3a7 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -98,23 +98,6 @@
return CLK / 1000;
}
-/*
- * Return the current static memory controller clock frequency
- * in units of 10kHz
- */
-unsigned int pxa3xx_get_memclk_frequency_10khz(void)
-{
- unsigned long acsr;
- unsigned int smcfs, clk = 0;
-
- acsr = ACSR;
-
- smcfs = (acsr >> 23) & 0x7;
- clk = (acsr & ACCR_D0CS) ? RO_CLK : smcfs_mult[smcfs] * BASE_CLK;
-
- return (clk / 10000);
-}
-
void pxa3xx_clear_reset_status(unsigned int mask)
{
/* RESET_STATUS_* has a 1:1 mapping with ARSR */
@@ -265,7 +248,7 @@
INIT_CLKREG(&clk_pxa3xx_i2c, "pxa2xx-i2c.0", NULL),
INIT_CLKREG(&clk_pxa3xx_udc, "pxa27x-udc", NULL),
INIT_CLKREG(&clk_pxa3xx_usbh, "pxa27x-ohci", NULL),
- INIT_CLKREG(&clk_pxa3xx_u2d, NULL, "U2DCLK"),
+ INIT_CLKREG(&clk_pxa3xx_u2d, "pxa3xx-u2d", NULL),
INIT_CLKREG(&clk_pxa3xx_keypad, "pxa27x-keypad", NULL),
INIT_CLKREG(&clk_pxa3xx_ssp1, "pxa27x-ssp.0", NULL),
INIT_CLKREG(&clk_pxa3xx_ssp2, "pxa27x-ssp.1", NULL),
diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c
index 0642920..7d29dd3 100644
--- a/arch/arm/mach-pxa/pxa930.c
+++ b/arch/arm/mach-pxa/pxa930.c
@@ -192,7 +192,7 @@
static int __init pxa930_init(void)
{
- if (cpu_is_pxa930() || cpu_is_pxa935()) {
+ if (cpu_is_pxa930() || cpu_is_pxa935() || cpu_is_pxa950()) {
mfp_init_base(io_p2v(MFPR_BASE));
mfp_init_addr(pxa930_mfp_addr_map);
}
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index a654d1e..62de073 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -56,6 +56,8 @@
#include "devices.h"
#include "generic.h"
+#define STARGATE_NR_IRQS (IRQ_BOARD_START + 8)
+
/* Bluetooth */
#define SG2_BT_RESET 81
@@ -1011,6 +1013,7 @@
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.map_io = pxa_map_io,
+ .nr_irqs = STARGATE_NR_IRQS,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = stargate2_init,
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index f02dcb5..0f440c9 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -25,7 +25,7 @@
#include <mach/pxa930.h>
#include <mach/pxafb.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
#include "devices.h"
#include "generic.h"
diff --git a/arch/arm/mach-pxa/tavorevb3.c b/arch/arm/mach-pxa/tavorevb3.c
new file mode 100644
index 0000000..5eeba64
--- /dev/null
+++ b/arch/arm/mach-pxa/tavorevb3.c
@@ -0,0 +1,136 @@
+/*
+ * linux/arch/arm/mach-pxa/tavorevb3.c
+ *
+ * Support for the Marvell EVB3 Development Platform.
+ *
+ * Copyright: (C) Copyright 2008-2010 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/mfd/88pm860x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pxa930.h>
+
+#include <plat/i2c.h>
+
+#include "devices.h"
+#include "generic.h"
+
+#define TAVOREVB3_NR_IRQS (IRQ_BOARD_START + 24)
+
+static mfp_cfg_t evb3_mfp_cfg[] __initdata = {
+ /* UART */
+ GPIO53_UART1_TXD,
+ GPIO54_UART1_RXD,
+
+ /* PMIC */
+ PMIC_INT_GPIO83,
+};
+
+#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
+static struct pm860x_touch_pdata evb3_touch = {
+ .gpadc_prebias = 1,
+ .slot_cycle = 1,
+ .tsi_prebias = 6,
+ .pen_prebias = 16,
+ .pen_prechg = 2,
+ .res_x = 300,
+};
+
+static struct pm860x_backlight_pdata evb3_backlight[] = {
+ {
+ .id = PM8606_ID_BACKLIGHT,
+ .iset = PM8606_WLED_CURRENT(24),
+ .flags = PM8606_BACKLIGHT1,
+ },
+ {},
+};
+
+static struct pm860x_led_pdata evb3_led[] = {
+ {
+ .id = PM8606_ID_LED,
+ .iset = PM8606_LED_CURRENT(12),
+ .flags = PM8606_LED1_RED,
+ }, {
+ .id = PM8606_ID_LED,
+ .iset = PM8606_LED_CURRENT(12),
+ .flags = PM8606_LED1_GREEN,
+ }, {
+ .id = PM8606_ID_LED,
+ .iset = PM8606_LED_CURRENT(12),
+ .flags = PM8606_LED1_BLUE,
+ }, {
+ .id = PM8606_ID_LED,
+ .iset = PM8606_LED_CURRENT(12),
+ .flags = PM8606_LED2_RED,
+ }, {
+ .id = PM8606_ID_LED,
+ .iset = PM8606_LED_CURRENT(12),
+ .flags = PM8606_LED2_GREEN,
+ }, {
+ .id = PM8606_ID_LED,
+ .iset = PM8606_LED_CURRENT(12),
+ .flags = PM8606_LED2_BLUE,
+ },
+};
+
+static struct pm860x_platform_data evb3_pm8607_info = {
+ .touch = &evb3_touch,
+ .backlight = &evb3_backlight[0],
+ .led = &evb3_led[0],
+ .companion_addr = 0x10,
+ .irq_mode = 0,
+ .irq_base = IRQ_BOARD_START,
+
+ .i2c_port = GI2C_PORT,
+};
+
+static struct i2c_board_info evb3_i2c_info[] = {
+ {
+ .type = "88PM860x",
+ .addr = 0x34,
+ .platform_data = &evb3_pm8607_info,
+ .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO83)),
+ },
+};
+
+static void __init evb3_init_i2c(void)
+{
+ pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(evb3_i2c_info));
+}
+#else
+static inline void evb3_init_i2c(void) {}
+#endif
+
+static void __init evb3_init(void)
+{
+ /* initialize MFP configurations */
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(evb3_mfp_cfg));
+
+ pxa_set_ffuart_info(NULL);
+
+ evb3_init_i2c();
+}
+
+MACHINE_START(TAVOREVB3, "PXA950 Evaluation Board (aka TavorEVB3)")
+ .phys_io = 0x40000000,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .nr_irqs = TAVOREVB3_NR_IRQS,
+ .init_irq = pxa3xx_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = evb3_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 83cc3a1..3a06e98 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -956,6 +956,7 @@
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.fixup = fixup_tosa,
.map_io = pxa_map_io,
+ .nr_irqs = TOSA_NR_IRQS,
.init_irq = pxa25x_init_irq,
.init_machine = tosa_init,
.timer = &pxa_timer,
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index f0d0228..8c44bc4 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -37,7 +37,7 @@
#include <mach/z2.h>
#include <mach/pxafb.h>
#include <mach/mmc.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
#include <mach/pxa2xx_spi.h>
#include <plat/i2c.h>
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 03b9cb9..9da2b62 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -904,6 +904,7 @@
.io_pg_offst = ((io_p2v(0x40000000) >> 18) & 0xfffc),
.boot_params = 0xa0000100,
.map_io = zeus_map_io,
+ .nr_irqs = ZEUS_NR_IRQS,
.init_irq = zeus_init_irq,
.timer = &pxa_timer,
.init_machine = zeus_init,
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index c479cbe..69df3ed 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -30,7 +30,7 @@
#include <mach/zylonite.h>
#include <mach/mmc.h>
#include <mach/ohci.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
#include <plat/pxa3xx_nand.h>
#include "devices.h"
@@ -415,6 +415,7 @@
.boot_params = 0xa0000100,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.map_io = pxa_map_io,
+ .nr_irqs = ZYLONITE_NR_IRQS,
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
.init_machine = zylonite_init,
diff --git a/arch/arm/mach-rpc/include/mach/vmalloc.h b/arch/arm/mach-rpc/include/mach/vmalloc.h
index 9a96fd6..3bcd86f 100644
--- a/arch/arm/mach-rpc/include/mach/vmalloc.h
+++ b/arch/arm/mach-rpc/include/mach/vmalloc.h
@@ -7,4 +7,4 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#define VMALLOC_END (PAGE_OFFSET + 0x1c000000)
+#define VMALLOC_END 0xdc000000
diff --git a/arch/arm/mach-shark/include/mach/vmalloc.h b/arch/arm/mach-shark/include/mach/vmalloc.h
index f6c6837..8e845b6 100644
--- a/arch/arm/mach-shark/include/mach/vmalloc.h
+++ b/arch/arm/mach-shark/include/mach/vmalloc.h
@@ -1,4 +1,4 @@
/*
* arch/arm/mach-shark/include/mach/vmalloc.h
*/
-#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
+#define VMALLOC_END 0xd0000000
diff --git a/arch/arm/mach-tcc8k/Kconfig b/arch/arm/mach-tcc8k/Kconfig
new file mode 100644
index 0000000..ad86415
--- /dev/null
+++ b/arch/arm/mach-tcc8k/Kconfig
@@ -0,0 +1,11 @@
+if ARCH_TCC8K
+
+comment "TCC8000 systems:"
+
+config MACH_TCC8000_SDK
+ bool "Telechips TCC8000-SDK development kit"
+ default y
+ help
+ Support for the Telechips TCC8000-SDK board.
+
+endif
diff --git a/arch/arm/mach-tcc8k/Makefile b/arch/arm/mach-tcc8k/Makefile
new file mode 100644
index 0000000..9bacf31
--- /dev/null
+++ b/arch/arm/mach-tcc8k/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for TCC8K boards and common files.
+#
+
+# Common support
+obj-y += clock.o irq.o time.o io.o devices.o
+
+# Board specific support
+obj-$(CONFIG_MACH_TCC8000_SDK) += board-tcc8000-sdk.o
diff --git a/arch/arm/mach-tcc8k/Makefile.boot b/arch/arm/mach-tcc8k/Makefile.boot
new file mode 100644
index 0000000..f135c9d
--- /dev/null
+++ b/arch/arm/mach-tcc8k/Makefile.boot
@@ -0,0 +1,3 @@
+ zreladdr-y := 0x20008000
+params_phys-y := 0x20000100
+initrd_phys-y := 0x20800000
diff --git a/arch/arm/mach-tcc8k/board-tcc8000-sdk.c b/arch/arm/mach-tcc8k/board-tcc8000-sdk.c
new file mode 100644
index 0000000..4e42555
--- /dev/null
+++ b/arch/arm/mach-tcc8k/board-tcc8000-sdk.c
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+
+#include <mach/clock.h>
+
+#include "common.h"
+
+#define XI_FREQUENCY 12000000
+#define XTI_FREQUENCY 32768
+
+#ifdef CONFIG_MTD_NAND_TCC
+/* NAND */
+static struct tcc_nand_platform_data tcc8k_sdk_nand_data = {
+ .width = 1,
+ .hw_ecc = 0,
+};
+#endif
+
+static void __init tcc8k_init(void)
+{
+#ifdef CONFIG_MTD_NAND_TCC
+ tcc_nand_device.dev.platform_data = &tcc8k_sdk_nand_data;
+ platform_device_register(&tcc_nand_device);
+#endif
+}
+
+static void __init tcc8k_init_timer(void)
+{
+ tcc_clocks_init(XI_FREQUENCY, XTI_FREQUENCY);
+}
+
+static struct sys_timer tcc8k_timer = {
+ .init = tcc8k_init_timer,
+};
+
+static void __init tcc8k_map_io(void)
+{
+ tcc8k_map_common_io();
+}
+
+MACHINE_START(TCC8000_SDK, "Telechips TCC8000-SDK Demo Board")
+ .phys_io = 0x90000000,
+ .io_pg_offst = ((0xf1000000) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x00000100,
+ .map_io = tcc8k_map_io,
+ .init_irq = tcc8k_init_irq,
+ .init_machine = tcc8k_init,
+ .timer = &tcc8k_timer,
+MACHINE_END
diff --git a/arch/arm/mach-tcc8k/clock.c b/arch/arm/mach-tcc8k/clock.c
new file mode 100644
index 0000000..ba32a15
--- /dev/null
+++ b/arch/arm/mach-tcc8k/clock.c
@@ -0,0 +1,567 @@
+/*
+ * Lowlevel clock handling for Telechips TCC8xxx SoCs
+ *
+ * Copyright (C) 2010 by Hans J. Koch <hjk@linutronix.de>
+ *
+ * Licensed under the terms of the GPL v2
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+
+#include <asm/clkdev.h>
+
+#include <mach/clock.h>
+#include <mach/irqs.h>
+#include <mach/tcc8k-regs.h>
+
+#include "common.h"
+
+#define BCLKCTR0 (CKC_BASE + BCLKCTR0_OFFS)
+#define BCLKCTR1 (CKC_BASE + BCLKCTR1_OFFS)
+
+#define ACLKREF (CKC_BASE + ACLKREF_OFFS)
+#define ACLKUART0 (CKC_BASE + ACLKUART0_OFFS)
+#define ACLKUART1 (CKC_BASE + ACLKUART1_OFFS)
+#define ACLKUART2 (CKC_BASE + ACLKUART2_OFFS)
+#define ACLKUART3 (CKC_BASE + ACLKUART3_OFFS)
+#define ACLKUART4 (CKC_BASE + ACLKUART4_OFFS)
+#define ACLKI2C (CKC_BASE + ACLKI2C_OFFS)
+#define ACLKADC (CKC_BASE + ACLKADC_OFFS)
+#define ACLKUSBH (CKC_BASE + ACLKUSBH_OFFS)
+#define ACLKLCD (CKC_BASE + ACLKLCD_OFFS)
+#define ACLKSDH0 (CKC_BASE + ACLKSDH0_OFFS)
+#define ACLKSDH1 (CKC_BASE + ACLKSDH1_OFFS)
+#define ACLKSPI0 (CKC_BASE + ACLKSPI0_OFFS)
+#define ACLKSPI1 (CKC_BASE + ACLKSPI1_OFFS)
+#define ACLKSPDIF (CKC_BASE + ACLKSPDIF_OFFS)
+#define ACLKC3DEC (CKC_BASE + ACLKC3DEC_OFFS)
+#define ACLKCAN0 (CKC_BASE + ACLKCAN0_OFFS)
+#define ACLKCAN1 (CKC_BASE + ACLKCAN1_OFFS)
+#define ACLKGSB0 (CKC_BASE + ACLKGSB0_OFFS)
+#define ACLKGSB1 (CKC_BASE + ACLKGSB1_OFFS)
+#define ACLKGSB2 (CKC_BASE + ACLKGSB2_OFFS)
+#define ACLKGSB3 (CKC_BASE + ACLKGSB3_OFFS)
+#define ACLKUSBH (CKC_BASE + ACLKUSBH_OFFS)
+#define ACLKTCT (CKC_BASE + ACLKTCT_OFFS)
+#define ACLKTCX (CKC_BASE + ACLKTCX_OFFS)
+#define ACLKTCZ (CKC_BASE + ACLKTCZ_OFFS)
+
+/* Crystal frequencies */
+static unsigned long xi_rate, xti_rate;
+
+static void __iomem *pll_cfg_addr(int pll)
+{
+ switch (pll) {
+ case 0: return (CKC_BASE + PLL0CFG_OFFS);
+ case 1: return (CKC_BASE + PLL1CFG_OFFS);
+ case 2: return (CKC_BASE + PLL2CFG_OFFS);
+ default:
+ BUG();
+ }
+}
+
+static int pll_enable(int pll, int enable)
+{
+ u32 reg;
+ void __iomem *addr = pll_cfg_addr(pll);
+
+ reg = __raw_readl(addr);
+ if (enable)
+ reg &= ~PLLxCFG_PD;
+ else
+ reg |= PLLxCFG_PD;
+
+ __raw_writel(reg, addr);
+ return 0;
+}
+
+static int xi_enable(int enable)
+{
+ u32 reg;
+
+ reg = __raw_readl(CKC_BASE + CLKCTRL_OFFS);
+ if (enable)
+ reg |= CLKCTRL_XE;
+ else
+ reg &= ~CLKCTRL_XE;
+
+ __raw_writel(reg, CKC_BASE + CLKCTRL_OFFS);
+ return 0;
+}
+
+static int root_clk_enable(enum root_clks src)
+{
+ switch (src) {
+ case CLK_SRC_PLL0: return pll_enable(0, 1);
+ case CLK_SRC_PLL1: return pll_enable(1, 1);
+ case CLK_SRC_PLL2: return pll_enable(2, 1);
+ case CLK_SRC_XI: return xi_enable(1);
+ default:
+ BUG();
+ }
+ return 0;
+}
+
+static int root_clk_disable(enum root_clks root_src)
+{
+ switch (root_src) {
+ case CLK_SRC_PLL0: return pll_enable(0, 0);
+ case CLK_SRC_PLL1: return pll_enable(1, 0);
+ case CLK_SRC_PLL2: return pll_enable(2, 0);
+ case CLK_SRC_XI: return xi_enable(0);
+ default:
+ BUG();
+ }
+ return 0;
+}
+
+static int enable_clk(struct clk *clk)
+{
+ u32 reg;
+
+ if (clk->root_id != CLK_SRC_NOROOT)
+ return root_clk_enable(clk->root_id);
+
+ if (clk->aclkreg) {
+ reg = __raw_readl(clk->aclkreg);
+ reg |= ACLK_EN;
+ __raw_writel(reg, clk->aclkreg);
+ }
+ if (clk->bclkctr) {
+ reg = __raw_readl(clk->bclkctr);
+ reg |= 1 << clk->bclk_shift;
+ __raw_writel(reg, clk->bclkctr);
+ }
+ return 0;
+}
+
+static void disable_clk(struct clk *clk)
+{
+ u32 reg;
+
+ if (clk->root_id != CLK_SRC_NOROOT) {
+ root_clk_disable(clk->root_id);
+ return;
+ }
+
+ if (clk->bclkctr) {
+ reg = __raw_readl(clk->bclkctr);
+ reg &= ~(1 << clk->bclk_shift);
+ __raw_writel(reg, clk->bclkctr);
+ }
+ if (clk->aclkreg) {
+ reg = __raw_readl(clk->aclkreg);
+ reg &= ~ACLK_EN;
+ __raw_writel(reg, clk->aclkreg);
+ }
+}
+
+static unsigned long get_rate_pll(int pll)
+{
+ u32 reg;
+ unsigned long s, m, p;
+ void __iomem *addr = pll_cfg_addr(pll);
+
+ reg = __raw_readl(addr);
+ s = (reg >> 16) & 0x07;
+ m = (reg >> 8) & 0xff;
+ p = reg & 0x3f;
+
+ return (m * xi_rate) / (p * (1 << s));
+}
+
+static unsigned long get_rate_pll_div(int pll)
+{
+ u32 reg;
+ unsigned long div = 0;
+ void __iomem *addr;
+
+ switch (pll) {
+ case 0:
+ addr = CKC_BASE + CLKDIVC0_OFFS;
+ reg = __raw_readl(addr);
+ if (reg & CLKDIVC0_P0E)
+ div = (reg >> 24) & 0x3f;
+ break;
+ case 1:
+ addr = CKC_BASE + CLKDIVC0_OFFS;
+ reg = __raw_readl(addr);
+ if (reg & CLKDIVC0_P1E)
+ div = (reg >> 16) & 0x3f;
+ break;
+ case 2:
+ addr = CKC_BASE + CLKDIVC1_OFFS;
+ reg = __raw_readl(addr);
+ if (reg & CLKDIVC1_P2E)
+ div = __raw_readl(addr) & 0x3f;
+ break;
+ }
+ return get_rate_pll(pll) / (div + 1);
+}
+
+static unsigned long get_rate_xi_div(void)
+{
+ unsigned long div = 0;
+ u32 reg = __raw_readl(CKC_BASE + CLKDIVC0_OFFS);
+
+ if (reg & CLKDIVC0_XE)
+ div = (reg >> 8) & 0x3f;
+
+ return xi_rate / (div + 1);
+}
+
+static unsigned long get_rate_xti_div(void)
+{
+ unsigned long div = 0;
+ u32 reg = __raw_readl(CKC_BASE + CLKDIVC0_OFFS);
+
+ if (reg & CLKDIVC0_XTE)
+ div = reg & 0x3f;
+
+ return xti_rate / (div + 1);
+}
+
+static unsigned long root_clk_get_rate(enum root_clks src)
+{
+ switch (src) {
+ case CLK_SRC_PLL0: return get_rate_pll(0);
+ case CLK_SRC_PLL1: return get_rate_pll(1);
+ case CLK_SRC_PLL2: return get_rate_pll(2);
+ case CLK_SRC_PLL0DIV: return get_rate_pll_div(0);
+ case CLK_SRC_PLL1DIV: return get_rate_pll_div(1);
+ case CLK_SRC_PLL2DIV: return get_rate_pll_div(2);
+ case CLK_SRC_XI: return xi_rate;
+ case CLK_SRC_XTI: return xti_rate;
+ case CLK_SRC_XIDIV: return get_rate_xi_div();
+ case CLK_SRC_XTIDIV: return get_rate_xti_div();
+ default: return 0;
+ }
+}
+
+static unsigned long aclk_get_rate(struct clk *clk)
+{
+ u32 reg;
+ unsigned long div;
+ unsigned int src;
+
+ reg = __raw_readl(clk->aclkreg);
+ div = reg & 0x0fff;
+ src = (reg >> ACLK_SEL_SHIFT) & CLK_SRC_MASK;
+ return root_clk_get_rate(src) / (div + 1);
+}
+
+static unsigned long aclk_best_div(struct clk *clk, unsigned long rate)
+{
+ unsigned long div, src, freq, r1, r2;
+
+ src = __raw_readl(clk->aclkreg) >> ACLK_SEL_SHIFT;
+ src &= CLK_SRC_MASK;
+ freq = root_clk_get_rate(src);
+ div = freq / rate + 1;
+ r1 = freq / div;
+ r2 = freq / (div + 1);
+ if (r2 >= rate)
+ return div + 1;
+ if ((rate - r2) < (r1 - rate))
+ return div + 1;
+
+ return div;
+}
+
+static unsigned long aclk_round_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned int src;
+
+ src = __raw_readl(clk->aclkreg) >> ACLK_SEL_SHIFT;
+ src &= CLK_SRC_MASK;
+
+ return root_clk_get_rate(src) / aclk_best_div(clk, rate);
+}
+
+static int aclk_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 reg;
+
+ reg = __raw_readl(clk->aclkreg) & ~ACLK_DIV_MASK;
+ reg |= aclk_best_div(clk, rate);
+ return 0;
+}
+
+static unsigned long get_rate_sys(struct clk *clk)
+{
+ unsigned int src;
+
+ src = __raw_readl(CKC_BASE + CLKCTRL_OFFS) & CLK_SRC_MASK;
+ return root_clk_get_rate(src);
+}
+
+static unsigned long get_rate_bus(struct clk *clk)
+{
+ unsigned int div;
+
+ div = (__raw_readl(CKC_BASE + CLKCTRL_OFFS) >> 4) & 0xff;
+ return get_rate_sys(clk) / (div + 1);
+}
+
+static unsigned long get_rate_cpu(struct clk *clk)
+{
+ unsigned int reg, div, fsys, fbus;
+
+ fbus = get_rate_bus(clk);
+ reg = __raw_readl(CKC_BASE + CLKCTRL_OFFS);
+ if (reg & (1 << 29))
+ return fbus;
+ fsys = get_rate_sys(clk);
+ div = (reg >> 16) & 0x0f;
+ return fbus + ((fsys - fbus) * (div + 1)) / 16;
+}
+
+static unsigned long get_rate_root(struct clk *clk)
+{
+ return root_clk_get_rate(clk->root_id);
+}
+
+static int aclk_set_parent(struct clk *clock, struct clk *parent)
+{
+ u32 reg;
+
+ if (clock->parent == parent)
+ return 0;
+
+ clock->parent = parent;
+
+ if (!parent)
+ return 0;
+
+ if (parent->root_id == CLK_SRC_NOROOT)
+ return 0;
+ reg = __raw_readl(clock->aclkreg);
+ reg &= ~ACLK_SEL_MASK;
+ reg |= (parent->root_id << ACLK_SEL_SHIFT) & ACLK_SEL_MASK;
+ __raw_writel(reg, clock->aclkreg);
+
+ return 0;
+}
+
+#define DEFINE_ROOT_CLOCK(name, ri, p) \
+ static struct clk name = { \
+ .root_id = ri, \
+ .get_rate = get_rate_root, \
+ .enable = enable_clk, \
+ .disable = disable_clk, \
+ .parent = p, \
+ };
+
+#define DEFINE_SPECIAL_CLOCK(name, gr, p) \
+ static struct clk name = { \
+ .root_id = CLK_SRC_NOROOT, \
+ .get_rate = gr, \
+ .parent = p, \
+ };
+
+#define DEFINE_ACLOCK(name, bc, bs, ar) \
+ static struct clk name = { \
+ .root_id = CLK_SRC_NOROOT, \
+ .bclkctr = bc, \
+ .bclk_shift = bs, \
+ .aclkreg = ar, \
+ .get_rate = aclk_get_rate, \
+ .set_rate = aclk_set_rate, \
+ .round_rate = aclk_round_rate, \
+ .enable = enable_clk, \
+ .disable = disable_clk, \
+ .set_parent = aclk_set_parent, \
+ };
+
+#define DEFINE_BCLOCK(name, bc, bs, gr, p) \
+ static struct clk name = { \
+ .root_id = CLK_SRC_NOROOT, \
+ .bclkctr = bc, \
+ .bclk_shift = bs, \
+ .get_rate = gr, \
+ .enable = enable_clk, \
+ .disable = disable_clk, \
+ .parent = p, \
+ };
+
+DEFINE_ROOT_CLOCK(xi, CLK_SRC_XI, NULL)
+DEFINE_ROOT_CLOCK(xti, CLK_SRC_XTI, NULL)
+DEFINE_ROOT_CLOCK(xidiv, CLK_SRC_XIDIV, &xi)
+DEFINE_ROOT_CLOCK(xtidiv, CLK_SRC_XTIDIV, &xti)
+DEFINE_ROOT_CLOCK(pll0, CLK_SRC_PLL0, &xi)
+DEFINE_ROOT_CLOCK(pll1, CLK_SRC_PLL1, &xi)
+DEFINE_ROOT_CLOCK(pll2, CLK_SRC_PLL2, &xi)
+DEFINE_ROOT_CLOCK(pll0div, CLK_SRC_PLL0DIV, &pll0)
+DEFINE_ROOT_CLOCK(pll1div, CLK_SRC_PLL1DIV, &pll1)
+DEFINE_ROOT_CLOCK(pll2div, CLK_SRC_PLL2DIV, &pll2)
+
+/* The following 3 clocks are special and are initialized explicitly later */
+DEFINE_SPECIAL_CLOCK(sys, get_rate_sys, NULL)
+DEFINE_SPECIAL_CLOCK(bus, get_rate_bus, &sys)
+DEFINE_SPECIAL_CLOCK(cpu, get_rate_cpu, &sys)
+
+DEFINE_ACLOCK(tct, NULL, 0, ACLKTCT)
+DEFINE_ACLOCK(tcx, NULL, 0, ACLKTCX)
+DEFINE_ACLOCK(tcz, NULL, 0, ACLKTCZ)
+DEFINE_ACLOCK(ref, NULL, 0, ACLKREF)
+DEFINE_ACLOCK(uart0, BCLKCTR0, 5, ACLKUART0)
+DEFINE_ACLOCK(uart1, BCLKCTR0, 23, ACLKUART1)
+DEFINE_ACLOCK(uart2, BCLKCTR0, 6, ACLKUART2)
+DEFINE_ACLOCK(uart3, BCLKCTR0, 8, ACLKUART3)
+DEFINE_ACLOCK(uart4, BCLKCTR1, 6, ACLKUART4)
+DEFINE_ACLOCK(i2c, BCLKCTR0, 7, ACLKI2C)
+DEFINE_ACLOCK(adc, BCLKCTR0, 10, ACLKADC)
+DEFINE_ACLOCK(usbh0, BCLKCTR0, 11, ACLKUSBH)
+DEFINE_ACLOCK(lcd, BCLKCTR0, 13, ACLKLCD)
+DEFINE_ACLOCK(sd0, BCLKCTR0, 17, ACLKSDH0)
+DEFINE_ACLOCK(sd1, BCLKCTR1, 5, ACLKSDH1)
+DEFINE_ACLOCK(spi0, BCLKCTR0, 24, ACLKSPI0)
+DEFINE_ACLOCK(spi1, BCLKCTR0, 30, ACLKSPI1)
+DEFINE_ACLOCK(spdif, BCLKCTR1, 2, ACLKSPDIF)
+DEFINE_ACLOCK(c3dec, BCLKCTR1, 9, ACLKC3DEC)
+DEFINE_ACLOCK(can0, BCLKCTR1, 10, ACLKCAN0)
+DEFINE_ACLOCK(can1, BCLKCTR1, 11, ACLKCAN1)
+DEFINE_ACLOCK(gsb0, BCLKCTR1, 13, ACLKGSB0)
+DEFINE_ACLOCK(gsb1, BCLKCTR1, 14, ACLKGSB1)
+DEFINE_ACLOCK(gsb2, BCLKCTR1, 15, ACLKGSB2)
+DEFINE_ACLOCK(gsb3, BCLKCTR1, 16, ACLKGSB3)
+DEFINE_ACLOCK(usbh1, BCLKCTR1, 20, ACLKUSBH)
+
+DEFINE_BCLOCK(dai0, BCLKCTR0, 0, NULL, NULL)
+DEFINE_BCLOCK(pic, BCLKCTR0, 1, NULL, NULL)
+DEFINE_BCLOCK(tc, BCLKCTR0, 2, NULL, NULL)
+DEFINE_BCLOCK(gpio, BCLKCTR0, 3, NULL, NULL)
+DEFINE_BCLOCK(usbd, BCLKCTR0, 4, NULL, NULL)
+DEFINE_BCLOCK(ecc, BCLKCTR0, 9, NULL, NULL)
+DEFINE_BCLOCK(gdma0, BCLKCTR0, 12, NULL, NULL)
+DEFINE_BCLOCK(rtc, BCLKCTR0, 15, NULL, NULL)
+DEFINE_BCLOCK(nfc, BCLKCTR0, 16, NULL, NULL)
+DEFINE_BCLOCK(g2d, BCLKCTR0, 18, NULL, NULL)
+DEFINE_BCLOCK(gdma1, BCLKCTR0, 22, NULL, NULL)
+DEFINE_BCLOCK(mscl, BCLKCTR0, 25, NULL, NULL)
+DEFINE_BCLOCK(bdma, BCLKCTR1, 0, NULL, NULL)
+DEFINE_BCLOCK(adma0, BCLKCTR1, 1, NULL, NULL)
+DEFINE_BCLOCK(scfg, BCLKCTR1, 3, NULL, NULL)
+DEFINE_BCLOCK(cid, BCLKCTR1, 4, NULL, NULL)
+DEFINE_BCLOCK(dai1, BCLKCTR1, 7, NULL, NULL)
+DEFINE_BCLOCK(adma1, BCLKCTR1, 8, NULL, NULL)
+DEFINE_BCLOCK(gps, BCLKCTR1, 12, NULL, NULL)
+DEFINE_BCLOCK(gdma2, BCLKCTR1, 17, NULL, NULL)
+DEFINE_BCLOCK(gdma3, BCLKCTR1, 18, NULL, NULL)
+DEFINE_BCLOCK(ddrc, BCLKCTR1, 19, NULL, NULL)
+
+#define _REGISTER_CLOCK(d, n, c) \
+ { \
+ .dev_id = d, \
+ .con_id = n, \
+ .clk = &c, \
+ },
+
+static struct clk_lookup lookups[] = {
+ _REGISTER_CLOCK(NULL, "bus", bus)
+ _REGISTER_CLOCK(NULL, "cpu", cpu)
+ _REGISTER_CLOCK(NULL, "tct", tct)
+ _REGISTER_CLOCK(NULL, "tcx", tcx)
+ _REGISTER_CLOCK(NULL, "tcz", tcz)
+ _REGISTER_CLOCK(NULL, "ref", ref)
+ _REGISTER_CLOCK(NULL, "dai0", dai0)
+ _REGISTER_CLOCK(NULL, "pic", pic)
+ _REGISTER_CLOCK(NULL, "tc", tc)
+ _REGISTER_CLOCK(NULL, "gpio", gpio)
+ _REGISTER_CLOCK(NULL, "usbd", usbd)
+ _REGISTER_CLOCK("tcc-uart.0", NULL, uart0)
+ _REGISTER_CLOCK("tcc-uart.2", NULL, uart2)
+ _REGISTER_CLOCK("tcc-i2c", NULL, i2c)
+ _REGISTER_CLOCK("tcc-uart.3", NULL, uart3)
+ _REGISTER_CLOCK(NULL, "ecc", ecc)
+ _REGISTER_CLOCK(NULL, "adc", adc)
+ _REGISTER_CLOCK("tcc-usbh.0", "usb", usbh0)
+ _REGISTER_CLOCK(NULL, "gdma0", gdma0)
+ _REGISTER_CLOCK(NULL, "lcd", lcd)
+ _REGISTER_CLOCK(NULL, "rtc", rtc)
+ _REGISTER_CLOCK(NULL, "nfc", nfc)
+ _REGISTER_CLOCK("tcc-mmc.0", NULL, sd0)
+ _REGISTER_CLOCK(NULL, "g2d", g2d)
+ _REGISTER_CLOCK(NULL, "gdma1", gdma1)
+ _REGISTER_CLOCK("tcc-uart.1", NULL, uart1)
+ _REGISTER_CLOCK("tcc-spi.0", NULL, spi0)
+ _REGISTER_CLOCK(NULL, "mscl", mscl)
+ _REGISTER_CLOCK("tcc-spi.1", NULL, spi1)
+ _REGISTER_CLOCK(NULL, "bdma", bdma)
+ _REGISTER_CLOCK(NULL, "adma0", adma0)
+ _REGISTER_CLOCK(NULL, "spdif", spdif)
+ _REGISTER_CLOCK(NULL, "scfg", scfg)
+ _REGISTER_CLOCK(NULL, "cid", cid)
+ _REGISTER_CLOCK("tcc-mmc.1", NULL, sd1)
+ _REGISTER_CLOCK("tcc-uart.4", NULL, uart4)
+ _REGISTER_CLOCK(NULL, "dai1", dai1)
+ _REGISTER_CLOCK(NULL, "adma1", adma1)
+ _REGISTER_CLOCK(NULL, "c3dec", c3dec)
+ _REGISTER_CLOCK("tcc-can.0", NULL, can0)
+ _REGISTER_CLOCK("tcc-can.1", NULL, can1)
+ _REGISTER_CLOCK(NULL, "gps", gps)
+ _REGISTER_CLOCK("tcc-gsb.0", NULL, gsb0)
+ _REGISTER_CLOCK("tcc-gsb.1", NULL, gsb1)
+ _REGISTER_CLOCK("tcc-gsb.2", NULL, gsb2)
+ _REGISTER_CLOCK("tcc-gsb.3", NULL, gsb3)
+ _REGISTER_CLOCK(NULL, "gdma2", gdma2)
+ _REGISTER_CLOCK(NULL, "gdma3", gdma3)
+ _REGISTER_CLOCK(NULL, "ddrc", ddrc)
+ _REGISTER_CLOCK("tcc-usbh.1", "usb", usbh1)
+};
+
+static struct clk *root_clk_by_index(enum root_clks src)
+{
+ switch (src) {
+ case CLK_SRC_PLL0: return &pll0;
+ case CLK_SRC_PLL1: return &pll1;
+ case CLK_SRC_PLL2: return &pll2;
+ case CLK_SRC_PLL0DIV: return &pll0div;
+ case CLK_SRC_PLL1DIV: return &pll1div;
+ case CLK_SRC_PLL2DIV: return &pll2div;
+ case CLK_SRC_XI: return ξ
+ case CLK_SRC_XTI: return &xti;
+ case CLK_SRC_XIDIV: return &xidiv;
+ case CLK_SRC_XTIDIV: return &xtidiv;
+ default: return NULL;
+ }
+}
+
+static void find_aclk_parent(struct clk *clk)
+{
+ unsigned int src;
+ struct clk *clock;
+
+ if (!clk->aclkreg)
+ return;
+
+ src = __raw_readl(clk->aclkreg) >> ACLK_SEL_SHIFT;
+ src &= CLK_SRC_MASK;
+
+ clock = root_clk_by_index(src);
+ if (!clock)
+ return;
+
+ clk->parent = clock;
+ clk->set_parent = aclk_set_parent;
+}
+
+void __init tcc_clocks_init(unsigned long xi_freq, unsigned long xti_freq)
+{
+ int i;
+
+ xi_rate = xi_freq;
+ xti_rate = xti_freq;
+
+ /* fixup parents and add the clock */
+ for (i = 0; i < ARRAY_SIZE(lookups); i++) {
+ find_aclk_parent(lookups[i].clk);
+ clkdev_add(&lookups[i]);
+ }
+ tcc8k_timer_init(&tcz, (void __iomem *)TIMER_BASE, INT_TC32);
+}
diff --git a/arch/arm/mach-tcc8k/common.h b/arch/arm/mach-tcc8k/common.h
new file mode 100644
index 0000000..705690a
--- /dev/null
+++ b/arch/arm/mach-tcc8k/common.h
@@ -0,0 +1,15 @@
+#ifndef MACH_TCC8K_COMMON_H
+#define MACH_TCC8K_COMMON_H
+
+#include <linux/platform_device.h>
+
+extern struct platform_device tcc_nand_device;
+
+struct clk;
+
+extern void tcc_clocks_init(unsigned long xi_freq, unsigned long xti_freq);
+extern void tcc8k_timer_init(struct clk *clock, void __iomem *base, int irq);
+extern void tcc8k_init_irq(void);
+extern void tcc8k_map_common_io(void);
+
+#endif
diff --git a/arch/arm/mach-tcc8k/devices.c b/arch/arm/mach-tcc8k/devices.c
new file mode 100644
index 0000000..6722ad7
--- /dev/null
+++ b/arch/arm/mach-tcc8k/devices.c
@@ -0,0 +1,239 @@
+/*
+ * linux/arch/arm/mach-tcc8k/devices.c
+ *
+ * Copyright (C) Telechips, Inc.
+ * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
+ *
+ * Licensed under the terms of GPL v2.
+ *
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/tcc8k-regs.h>
+#include <mach/irqs.h>
+
+#include "common.h"
+
+static u64 tcc8k_dmamask = DMA_BIT_MASK(32);
+
+#ifdef CONFIG_MTD_NAND_TCC
+/* NAND controller */
+static struct resource tcc_nand_resources[] = {
+ {
+ .start = (resource_size_t)NFC_BASE,
+ .end = (resource_size_t)NFC_BASE + 0x7f,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = INT_NFC,
+ .end = INT_NFC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device tcc_nand_device = {
+ .name = "tcc_nand",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(tcc_nand_resources),
+ .resource = tcc_nand_resources,
+};
+#endif
+
+#ifdef CONFIG_MMC_TCC8K
+/* MMC controller */
+static struct resource tcc8k_mmc0_resource[] = {
+ {
+ .start = INT_SD0,
+ .end = INT_SD0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource tcc8k_mmc1_resource[] = {
+ {
+ .start = INT_SD1,
+ .end = INT_SD1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device tcc8k_mmc0_device = {
+ .name = "tcc-mmc",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(tcc8k_mmc0_resource),
+ .resource = tcc8k_mmc0_resource,
+ .dev = {
+ .dma_mask = &tcc8k_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ }
+};
+
+struct platform_device tcc8k_mmc1_device = {
+ .name = "tcc-mmc",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(tcc8k_mmc1_resource),
+ .resource = tcc8k_mmc1_resource,
+ .dev = {
+ .dma_mask = &tcc8k_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ }
+};
+
+static inline void tcc8k_init_mmc(void)
+{
+ u32 reg = __raw_readl(GPIOPS_BASE + GPIOPS_FS1_OFFS);
+
+ reg |= GPIOPS_FS1_SDH0_BITS | GPIOPS_FS1_SDH1_BITS;
+ __raw_writel(reg, GPIOPS_BASE + GPIOPS_FS1_OFFS);
+
+ platform_device_register(&tcc8k_mmc0_device);
+ platform_device_register(&tcc8k_mmc1_device);
+}
+#else
+static inline void tcc8k_init_mmc(void) { }
+#endif
+
+#ifdef CONFIG_USB_OHCI_HCD
+static int tcc8k_ohci_init(struct device *dev)
+{
+ u32 reg;
+
+ /* Use GPIO PK19 as VBUS control output */
+ reg = __raw_readl(GPIOPK_BASE + GPIOPK_FS0_OFFS);
+ reg &= ~(1 << 19);
+ __raw_writel(reg, GPIOPK_BASE + GPIOPK_FS0_OFFS);
+ reg = __raw_readl(GPIOPK_BASE + GPIOPK_FS1_OFFS);
+ reg &= ~(1 << 19);
+ __raw_writel(reg, GPIOPK_BASE + GPIOPK_FS1_OFFS);
+
+ reg = __raw_readl(GPIOPK_BASE + GPIOPK_DOE_OFFS);
+ reg |= (1 << 19);
+ __raw_writel(reg, GPIOPK_BASE + GPIOPK_DOE_OFFS);
+ /* Turn on VBUS */
+ reg = __raw_readl(GPIOPK_BASE + GPIOPK_DAT_OFFS);
+ reg |= (1 << 19);
+ __raw_writel(reg, GPIOPK_BASE + GPIOPK_DAT_OFFS);
+
+ return 0;
+}
+
+static struct resource tcc8k_ohci0_resources[] = {
+ [0] = {
+ .start = (resource_size_t)USBH0_BASE,
+ .end = (resource_size_t)USBH0_BASE + 0x5c,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = INT_USBH0,
+ .end = INT_USBH0,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct resource tcc8k_ohci1_resources[] = {
+ [0] = {
+ .start = (resource_size_t)USBH1_BASE,
+ .end = (resource_size_t)USBH1_BASE + 0x5c,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = INT_USBH1,
+ .end = INT_USBH1,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct tccohci_platform_data tcc8k_ohci0_platform_data = {
+ .controller = 0,
+ .port_mode = PMM_PERPORT_MODE,
+ .init = tcc8k_ohci_init,
+};
+
+static struct tccohci_platform_data tcc8k_ohci1_platform_data = {
+ .controller = 1,
+ .port_mode = PMM_PERPORT_MODE,
+ .init = tcc8k_ohci_init,
+};
+
+static struct platform_device ohci0_device = {
+ .name = "tcc-ohci",
+ .id = 0,
+ .dev = {
+ .dma_mask = &tcc8k_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &tcc8k_ohci0_platform_data,
+ },
+ .num_resources = ARRAY_SIZE(tcc8k_ohci0_resources),
+ .resource = tcc8k_ohci0_resources,
+};
+
+static struct platform_device ohci1_device = {
+ .name = "tcc-ohci",
+ .id = 1,
+ .dev = {
+ .dma_mask = &tcc8k_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &tcc8k_ohci1_platform_data,
+ },
+ .num_resources = ARRAY_SIZE(tcc8k_ohci1_resources),
+ .resource = tcc8k_ohci1_resources,
+};
+
+static void __init tcc8k_init_usbhost(void)
+{
+ platform_device_register(&ohci0_device);
+ platform_device_register(&ohci1_device);
+}
+#else
+static void __init tcc8k_init_usbhost(void) { }
+#endif
+
+/* USB device controller*/
+#ifdef CONFIG_USB_GADGET_TCC8K
+static struct resource udc_resources[] = {
+ [0] = {
+ .start = INT_USBD,
+ .end = INT_USBD,
+ .flags = IORESOURCE_IRQ,
+ },
+ [1] = {
+ .start = INT_UDMA,
+ .end = INT_UDMA,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tcc8k_udc_device = {
+ .name = "tcc-udc",
+ .id = 0,
+ .resource = udc_resources,
+ .num_resources = ARRAY_SIZE(udc_resources),
+ .dev = {
+ .dma_mask = &tcc8k_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+static void __init tcc8k_init_usb_gadget(void)
+{
+ platform_device_register(&tcc8k_udc_device);
+}
+#else
+static void __init tcc8k_init_usb_gadget(void) { }
+#endif /* CONFIG_USB_GADGET_TCC83X */
+
+static int __init tcc8k_init_devices(void)
+{
+ tcc8k_init_mmc();
+ tcc8k_init_usbhost();
+ tcc8k_init_usb_gadget();
+ return 0;
+}
+
+arch_initcall(tcc8k_init_devices);
diff --git a/arch/arm/mach-tcc8k/io.c b/arch/arm/mach-tcc8k/io.c
new file mode 100644
index 0000000..9b39d7f
--- /dev/null
+++ b/arch/arm/mach-tcc8k/io.c
@@ -0,0 +1,62 @@
+/*
+ * linux/arch/arm/mach-tcc8k/io.c
+ *
+ * (C) 2009 Hans J. Koch <hjk@linutronix.de>
+ *
+ * derived from TCC83xx io.c
+ * Copyright (C) Telechips, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/tcc8k-regs.h>
+
+/*
+ * The machine specific code may provide the extra mapping besides the
+ * default mapping provided here.
+ */
+static struct map_desc tcc8k_io_desc[] __initdata = {
+ {
+ .virtual = (unsigned long)CS1_BASE_VIRT,
+ .pfn = __phys_to_pfn(CS1_BASE),
+ .length = CS1_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)AHB_PERI_BASE_VIRT,
+ .pfn = __phys_to_pfn(AHB_PERI_BASE),
+ .length = AHB_PERI_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)APB0_PERI_BASE_VIRT,
+ .pfn = __phys_to_pfn(APB0_PERI_BASE),
+ .length = APB0_PERI_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)APB1_PERI_BASE_VIRT,
+ .pfn = __phys_to_pfn(APB1_PERI_BASE),
+ .length = APB1_PERI_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)EXT_MEM_CTRL_BASE_VIRT,
+ .pfn = __phys_to_pfn(EXT_MEM_CTRL_BASE),
+ .length = EXT_MEM_CTRL_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+/*
+ * Maps common IO regions for tcc8k.
+ *
+ */
+void __init tcc8k_map_common_io(void)
+{
+ iotable_init(tcc8k_io_desc, ARRAY_SIZE(tcc8k_io_desc));
+}
diff --git a/arch/arm/mach-tcc8k/irq.c b/arch/arm/mach-tcc8k/irq.c
new file mode 100644
index 0000000..34575c4
--- /dev/null
+++ b/arch/arm/mach-tcc8k/irq.c
@@ -0,0 +1,111 @@
+/*
+ * Copyright (C) Telechips, Inc.
+ * Copyright (C) 2009-2010 Hans J. Koch <hjk@linutronix.de>
+ *
+ * Licensed under the terms of the GNU GPL version 2.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <asm/mach/irq.h>
+
+#include <mach/tcc8k-regs.h>
+#include <mach/irqs.h>
+
+#include "common.h"
+
+/* Disable IRQ */
+static void tcc8000_mask_ack_irq0(unsigned int irq)
+{
+ PIC0_IEN &= ~(1 << irq);
+ PIC0_CREQ |= (1 << irq);
+}
+
+static void tcc8000_mask_ack_irq1(unsigned int irq)
+{
+ PIC1_IEN &= ~(1 << (irq - 32));
+ PIC1_CREQ |= (1 << (irq - 32));
+}
+
+static void tcc8000_mask_irq0(unsigned int irq)
+{
+ PIC0_IEN &= ~(1 << irq);
+}
+
+static void tcc8000_mask_irq1(unsigned int irq)
+{
+ PIC1_IEN &= ~(1 << (irq - 32));
+}
+
+static void tcc8000_ack_irq0(unsigned int irq)
+{
+ PIC0_CREQ |= (1 << irq);
+}
+
+static void tcc8000_ack_irq1(unsigned int irq)
+{
+ PIC1_CREQ |= (1 << (irq - 32));
+}
+
+/* Enable IRQ */
+static void tcc8000_unmask_irq0(unsigned int irq)
+{
+ PIC0_IEN |= (1 << irq);
+ PIC0_INTOEN |= (1 << irq);
+}
+
+static void tcc8000_unmask_irq1(unsigned int irq)
+{
+ PIC1_IEN |= (1 << (irq - 32));
+ PIC1_INTOEN |= (1 << (irq - 32));
+}
+
+static struct irq_chip tcc8000_irq_chip0 = {
+ .name = "tcc_irq0",
+ .mask = tcc8000_mask_irq0,
+ .ack = tcc8000_ack_irq0,
+ .mask_ack = tcc8000_mask_ack_irq0,
+ .unmask = tcc8000_unmask_irq0,
+};
+
+static struct irq_chip tcc8000_irq_chip1 = {
+ .name = "tcc_irq1",
+ .mask = tcc8000_mask_irq1,
+ .ack = tcc8000_ack_irq1,
+ .mask_ack = tcc8000_mask_ack_irq1,
+ .unmask = tcc8000_unmask_irq1,
+};
+
+void __init tcc8k_init_irq(void)
+{
+ int irqno;
+
+ /* Mask and clear all interrupts */
+ PIC0_IEN = 0x00000000;
+ PIC0_CREQ = 0xffffffff;
+ PIC1_IEN = 0x00000000;
+ PIC1_CREQ = 0xffffffff;
+
+ PIC0_MEN0 = 0x00000003;
+ PIC1_MEN1 = 0x00000003;
+ PIC1_MEN = 0x00000003;
+
+ /* let all IRQs be level triggered */
+ PIC0_TMODE = 0xffffffff;
+ PIC1_TMODE = 0xffffffff;
+ /* all IRQs are IRQs (not FIQs) */
+ PIC0_IRQSEL = 0xffffffff;
+ PIC1_IRQSEL = 0xffffffff;
+
+ for (irqno = 0; irqno < NR_IRQS; irqno++) {
+ if (irqno < 32)
+ set_irq_chip(irqno, &tcc8000_irq_chip0);
+ else
+ set_irq_chip(irqno, &tcc8000_irq_chip1);
+ set_irq_handler(irqno, handle_level_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+}
diff --git a/arch/arm/mach-tcc8k/time.c b/arch/arm/mach-tcc8k/time.c
new file mode 100644
index 0000000..78d0600
--- /dev/null
+++ b/arch/arm/mach-tcc8k/time.c
@@ -0,0 +1,149 @@
+/*
+ * TCC8000 system timer setup
+ *
+ * (C) 2009 Hans J. Koch <hjk@linutronix.de>
+ *
+ * Licensed under the terms of the GPL version 2.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+
+#include <asm/mach/time.h>
+
+#include <mach/tcc8k-regs.h>
+#include <mach/irqs.h>
+
+#include "common.h"
+
+static void __iomem *timer_base;
+
+static cycle_t tcc_get_cycles(struct clocksource *cs)
+{
+ return __raw_readl(timer_base + TC32MCNT_OFFS);
+}
+
+static struct clocksource clocksource_tcc = {
+ .name = "tcc_tc32",
+ .rating = 200,
+ .read = tcc_get_cycles,
+ .mask = CLOCKSOURCE_MASK(32),
+ .shift = 28,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int tcc_set_next_event(unsigned long evt,
+ struct clock_event_device *unused)
+{
+ unsigned long reg = __raw_readl(timer_base + TC32MCNT_OFFS);
+
+ __raw_writel(reg + evt, timer_base + TC32CMP0_OFFS);
+ return 0;
+}
+
+static void tcc_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ unsigned long tc32irq;
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_ONESHOT:
+ tc32irq = __raw_readl(timer_base + TC32IRQ_OFFS);
+ tc32irq |= TC32IRQ_IRQEN0;
+ __raw_writel(tc32irq, timer_base + TC32IRQ_OFFS);
+ break;
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ case CLOCK_EVT_MODE_UNUSED:
+ tc32irq = __raw_readl(timer_base + TC32IRQ_OFFS);
+ tc32irq &= ~TC32IRQ_IRQEN0;
+ __raw_writel(tc32irq, timer_base + TC32IRQ_OFFS);
+ break;
+ case CLOCK_EVT_MODE_PERIODIC:
+ case CLOCK_EVT_MODE_RESUME:
+ break;
+ }
+}
+
+static irqreturn_t tcc8k_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+
+ /* Acknowledge TC32 interrupt by reading TC32IRQ */
+ __raw_readl(timer_base + TC32IRQ_OFFS);
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static struct clock_event_device clockevent_tcc = {
+ .name = "tcc_timer1",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .shift = 32,
+ .set_mode = tcc_set_mode,
+ .set_next_event = tcc_set_next_event,
+ .rating = 200,
+};
+
+static struct irqaction tcc8k_timer_irq = {
+ .name = "TC32_timer",
+ .flags = IRQF_DISABLED | IRQF_TIMER,
+ .handler = tcc8k_timer_interrupt,
+ .dev_id = &clockevent_tcc,
+};
+
+static int __init tcc_clockevent_init(struct clk *clock)
+{
+ unsigned int c = clk_get_rate(clock);
+
+ clocksource_tcc.mult = clocksource_hz2mult(c,
+ clocksource_tcc.shift);
+ clocksource_register(&clocksource_tcc);
+
+ clockevent_tcc.mult = div_sc(c, NSEC_PER_SEC,
+ clockevent_tcc.shift);
+ clockevent_tcc.max_delta_ns =
+ clockevent_delta2ns(0xfffffffe, &clockevent_tcc);
+ clockevent_tcc.min_delta_ns =
+ clockevent_delta2ns(0xff, &clockevent_tcc);
+
+ clockevent_tcc.cpumask = cpumask_of(0);
+
+ clockevents_register_device(&clockevent_tcc);
+
+ return 0;
+}
+
+void __init tcc8k_timer_init(struct clk *clock, void __iomem *base, int irq)
+{
+ u32 reg;
+
+ timer_base = base;
+ tcc8k_timer_irq.irq = irq;
+
+ /* Enable clocks */
+ clk_enable(clock);
+
+ /* Initialize 32-bit timer */
+ reg = __raw_readl(timer_base + TC32EN_OFFS);
+ reg &= ~TC32EN_ENABLE; /* Disable timer */
+ __raw_writel(reg, timer_base + TC32EN_OFFS);
+ /* Free running timer, counting from 0 to 0xffffffff */
+ __raw_writel(0, timer_base + TC32EN_OFFS);
+ __raw_writel(0, timer_base + TC32LDV_OFFS);
+ reg = __raw_readl(timer_base + TC32IRQ_OFFS);
+ reg |= TC32IRQ_IRQEN0; /* irq at match with CMP0 */
+ __raw_writel(reg, timer_base + TC32IRQ_OFFS);
+
+ __raw_writel(TC32EN_ENABLE, timer_base + TC32EN_OFFS);
+
+ tcc_clockevent_init(clock);
+ setup_irq(irq, &tcc8k_timer_irq);
+}
diff --git a/arch/arm/mach-versatile/include/mach/vmalloc.h b/arch/arm/mach-versatile/include/mach/vmalloc.h
index 427e361..ebd8a25 100644
--- a/arch/arm/mach-versatile/include/mach/vmalloc.h
+++ b/arch/arm/mach-versatile/include/mach/vmalloc.h
@@ -18,4 +18,4 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#define VMALLOC_END (PAGE_OFFSET + 0x18000000)
+#define VMALLOC_END 0xd8000000
diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c
index 4f5b396..b0a9830 100644
--- a/arch/arm/mm/mmap.c
+++ b/arch/arm/mm/mmap.c
@@ -144,3 +144,25 @@
{
return !(pfn + (size >> PAGE_SHIFT) > 0x00100000);
}
+
+#ifdef CONFIG_STRICT_DEVMEM
+
+#include <linux/ioport.h>
+
+/*
+ * devmem_is_allowed() checks to see if /dev/mem access to a certain
+ * address is valid. The argument is a physical page number.
+ * We mimic x86 here by disallowing access to system RAM as well as
+ * device-exclusive MMIO regions. This effectively disable read()/write()
+ * on /dev/mem.
+ */
+int devmem_is_allowed(unsigned long pfn)
+{
+ if (iomem_is_exclusive(pfn << PAGE_SHIFT))
+ return 0;
+ if (!page_is_ram(pfn))
+ return 1;
+ return 0;
+}
+
+#endif
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 6785db4..95f8d614 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -92,6 +92,18 @@
data/address de-multiplexing and decode, signal level shift,
interrupt control and various board functions.
+config HAVE_EPIT
+ bool
+
+config MXC_USE_EPIT
+ bool "Use EPIT instead of GPT"
+ depends on HAVE_EPIT
+ help
+ Use EPIT as the system timer on systems that have it. Normally you
+ don't have a reason to do so as the EPIT has the same features and
+ uses the same clocks as the GPT. Anyway, on some systems the GPT
+ may be in use for other purposes.
+
config MXC_ULPI
bool
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index 78d405e..bb3443f 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -13,6 +13,7 @@
obj-$(CONFIG_MXC_PWM) += pwm.o
obj-$(CONFIG_USB_EHCI_MXC) += ehci.o
obj-$(CONFIG_MXC_ULPI) += ulpi.o
+obj-$(CONFIG_MXC_USE_EPIT) += epit.o
obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o
obj-$(CONFIG_ARCH_MXC_AUDMUX_V2) += audmux-v2.o
obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c
index f9e7cdb..6292049 100644
--- a/arch/arm/plat-mxc/audmux-v2.c
+++ b/arch/arm/plat-mxc/audmux-v2.c
@@ -186,7 +186,13 @@
static int mxc_audmux_v2_init(void)
{
int ret;
-
+#if defined(CONFIG_ARCH_MX5)
+ if (cpu_is_mx51()) {
+ audmux_base = MX51_IO_ADDRESS(MX51_AUDMUX_BASE_ADDR);
+ ret = 0;
+ return ret;
+ }
+#endif
#if defined(CONFIG_ARCH_MX3)
if (cpu_is_mx31())
audmux_base = MX31_IO_ADDRESS(MX31_AUDMUX_BASE_ADDR);
diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/plat-mxc/devices/Kconfig
index 9ab784b..4047994 100644
--- a/arch/arm/plat-mxc/devices/Kconfig
+++ b/arch/arm/plat-mxc/devices/Kconfig
@@ -1,3 +1,10 @@
+config IMX_HAVE_PLATFORM_ESDHC
+ bool
+
+config IMX_HAVE_PLATFORM_FEC
+ bool
+ default y if ARCH_MX25 || SOC_IMX27 || ARCH_MX35 || ARCH_MX51
+
config IMX_HAVE_PLATFORM_FLEXCAN
select HAVE_CAN_FLEXCAN
bool
@@ -5,6 +12,9 @@
config IMX_HAVE_PLATFORM_IMX_I2C
bool
+config IMX_HAVE_PLATFORM_IMX_SSI
+ bool
+
config IMX_HAVE_PLATFORM_IMX_UART
bool
diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile
index 347da51..0a3c1f0 100644
--- a/arch/arm/plat-mxc/devices/Makefile
+++ b/arch/arm/plat-mxc/devices/Makefile
@@ -1,8 +1,9 @@
-ifdef CONFIG_CAN_FLEXCAN
-# the ifdef can be removed once the flexcan driver has been merged
-obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
-endif
+obj-$(CONFIG_IMX_HAVE_PLATFORM_ESDHC) += platform-esdhc.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_FEC) += platform-fec.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
+obj-y += platform-imx-dma.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_I2C) += platform-imx-i2c.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_SSI) += platform-imx-ssi.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UART) += platform-imx-uart.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_NAND) += platform-mxc_nand.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) += platform-spi_imx.o
diff --git a/arch/arm/plat-mxc/devices/platform-esdhc.c b/arch/arm/plat-mxc/devices/platform-esdhc.c
new file mode 100644
index 0000000..68db2a2
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-esdhc.c
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2010 Pengutronix, Wolfram Sang <w.sang@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#include <mach/devices-common.h>
+#include <mach/esdhc.h>
+
+struct platform_device *__init imx_add_esdhc(int id,
+ resource_size_t iobase, resource_size_t iosize,
+ resource_size_t irq,
+ const struct esdhc_platform_data *pdata)
+{
+ struct resource res[] = {
+ {
+ .start = iobase,
+ .end = iobase + iosize - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = irq,
+ .end = irq,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ return imx_add_platform_device("sdhci-esdhc-imx", id, res,
+ ARRAY_SIZE(res), pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-fec.c b/arch/arm/plat-mxc/devices/platform-fec.c
new file mode 100644
index 0000000..11d087f
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-fec.c
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <asm/sizes.h>
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_fec_data_entry_single(soc) \
+ { \
+ .iobase = soc ## _FEC_BASE_ADDR, \
+ .irq = soc ## _INT_FEC, \
+ }
+
+#ifdef CONFIG_ARCH_MX25
+const struct imx_fec_data imx25_fec_data __initconst =
+ imx_fec_data_entry_single(MX25);
+#endif /* ifdef CONFIG_ARCH_MX25 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_fec_data imx27_fec_data __initconst =
+ imx_fec_data_entry_single(MX27);
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_ARCH_MX35
+const struct imx_fec_data imx35_fec_data __initconst =
+ imx_fec_data_entry_single(MX35);
+#endif
+
+#ifdef CONFIG_ARCH_MX51
+const struct imx_fec_data imx51_fec_data __initconst =
+ imx_fec_data_entry_single(MX51);
+#endif
+
+struct platform_device *__init imx_add_fec(
+ const struct imx_fec_data *data,
+ const struct fec_platform_data *pdata)
+{
+ struct resource res[] = {
+ {
+ .start = data->iobase,
+ .end = data->iobase + SZ_4K,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = data->irq,
+ .end = data->irq,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ return imx_add_platform_device("fec", 0 /* -1? */,
+ res, ARRAY_SIZE(res),
+ pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-imx-dma.c b/arch/arm/plat-mxc/devices/platform-imx-dma.c
new file mode 100644
index 0000000..02d9890
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-imx-dma.c
@@ -0,0 +1,129 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <linux/compiler.h>
+#include <linux/err.h>
+#include <linux/init.h>
+
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+#ifdef SDMA_IS_MERGED
+#include <mach/sdma.h>
+#else
+struct sdma_platform_data {
+ int sdma_version;
+ char *cpu_name;
+ int to_version;
+};
+#endif
+
+struct imx_imx_sdma_data {
+ resource_size_t iobase;
+ resource_size_t irq;
+ struct sdma_platform_data pdata;
+};
+
+#define imx_imx_sdma_data_entry_single(soc, _sdma_version, _cpu_name, _to_version)\
+ { \
+ .iobase = soc ## _SDMA ## _BASE_ADDR, \
+ .irq = soc ## _INT_SDMA, \
+ .pdata = { \
+ .sdma_version = _sdma_version, \
+ .cpu_name = _cpu_name, \
+ .to_version = _to_version, \
+ }, \
+ }
+
+#ifdef CONFIG_ARCH_MX25
+const struct imx_imx_sdma_data imx25_imx_sdma_data __initconst =
+ imx_imx_sdma_data_entry_single(MX25, 1, "imx25", 0);
+#endif /* ifdef CONFIG_ARCH_MX25 */
+
+#ifdef CONFIG_ARCH_MX31
+struct imx_imx_sdma_data imx31_imx_sdma_data __initdata =
+ imx_imx_sdma_data_entry_single(MX31, 1, "imx31", 0);
+#endif /* ifdef CONFIG_ARCH_MX31 */
+
+#ifdef CONFIG_ARCH_MX35
+struct imx_imx_sdma_data imx35_imx_sdma_data __initdata =
+ imx_imx_sdma_data_entry_single(MX35, 2, "imx35", 0);
+#endif /* ifdef CONFIG_ARCH_MX35 */
+
+#ifdef CONFIG_ARCH_MX51
+const struct imx_imx_sdma_data imx51_imx_sdma_data __initconst =
+ imx_imx_sdma_data_entry_single(MX51, 2, "imx51", 0);
+#endif /* ifdef CONFIG_ARCH_MX51 */
+
+static struct platform_device __init __maybe_unused *imx_add_imx_sdma(
+ const struct imx_imx_sdma_data *data)
+{
+ struct resource res[] = {
+ {
+ .start = data->iobase,
+ .end = data->iobase + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = data->irq,
+ .end = data->irq,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ return imx_add_platform_device("imx-sdma", -1,
+ res, ARRAY_SIZE(res),
+ &data->pdata, sizeof(data->pdata));
+}
+
+static struct platform_device __init __maybe_unused *imx_add_imx_dma(void)
+{
+ return imx_add_platform_device("imx-dma", -1, NULL, 0, NULL, 0);
+}
+
+static int __init imxXX_add_imx_dma(void)
+{
+ struct platform_device *ret;
+
+#if defined(CONFIG_SOC_IMX21) || defined(CONFIG_SOC_IMX27)
+ if (cpu_is_mx21() || cpu_is_mx27())
+ ret = imx_add_imx_dma();
+ else
+#endif
+
+#if defined(CONFIG_ARCH_MX25)
+ if (cpu_is_mx25())
+ ret = imx_add_imx_sdma(&imx25_imx_sdma_data);
+ else
+#endif
+
+#if defined(CONFIG_ARCH_MX31)
+ if (cpu_is_mx31()) {
+ imx31_imx_sdma_data.pdata.to_version = mx31_revision() >> 4;
+ ret = imx_add_imx_sdma(&imx31_imx_sdma_data);
+ } else
+#endif
+
+#if defined(CONFIG_ARCH_MX35)
+ if (cpu_is_mx35()) {
+ imx35_imx_sdma_data.pdata.to_version = mx35_revision() >> 4;
+ ret = imx_add_imx_sdma(&imx35_imx_sdma_data);
+ } else
+#endif
+
+#if defined(CONFIG_ARCH_MX51)
+ if (cpu_is_mx51())
+ ret = imx_add_imx_sdma(&imx51_imx_sdma_data);
+ else
+#endif
+ ret = ERR_PTR(-ENODEV);
+
+ if (IS_ERR(ret))
+ return PTR_ERR(ret);
+
+ return 0;
+}
+arch_initcall(imxXX_add_imx_dma);
diff --git a/arch/arm/plat-mxc/devices/platform-imx-i2c.c b/arch/arm/plat-mxc/devices/platform-imx-i2c.c
index d0af9f7..ca988d4 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-i2c.c
+++ b/arch/arm/plat-mxc/devices/platform-imx-i2c.c
@@ -6,24 +6,94 @@
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
+#include <mach/hardware.h>
#include <mach/devices-common.h>
-struct platform_device *__init imx_add_imx_i2c(int id,
- resource_size_t iobase, resource_size_t iosize, int irq,
+#define imx_imx_i2c_data_entry_single(soc, _id, _hwid, _size) \
+ { \
+ .id = _id, \
+ .iobase = soc ## _I2C ## _hwid ## _BASE_ADDR, \
+ .iosize = _size, \
+ .irq = soc ## _INT_I2C ## _hwid, \
+ }
+
+#define imx_imx_i2c_data_entry(soc, _id, _hwid, _size) \
+ [_id] = imx_imx_i2c_data_entry_single(soc, _id, _hwid, _size)
+
+#ifdef CONFIG_SOC_IMX1
+const struct imx_imx_i2c_data imx1_imx_i2c_data __initconst =
+ imx_imx_i2c_data_entry_single(MX1, 0, , SZ_4K);
+#endif /* ifdef CONFIG_SOC_IMX1 */
+
+#ifdef CONFIG_SOC_IMX21
+const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst =
+ imx_imx_i2c_data_entry_single(MX21, 0, , SZ_4K);
+#endif /* ifdef CONFIG_SOC_IMX21 */
+
+#ifdef CONFIG_ARCH_MX25
+const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst = {
+#define imx25_imx_i2c_data_entry(_id, _hwid) \
+ imx_imx_i2c_data_entry(MX25, _id, _hwid, SZ_16K)
+ imx25_imx_i2c_data_entry(0, 1),
+ imx25_imx_i2c_data_entry(1, 2),
+ imx25_imx_i2c_data_entry(2, 3),
+};
+#endif /* ifdef CONFIG_ARCH_MX25 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst = {
+#define imx27_imx_i2c_data_entry(_id, _hwid) \
+ imx_imx_i2c_data_entry(MX27, _id, _hwid, SZ_4K)
+ imx27_imx_i2c_data_entry(0, 1),
+ imx27_imx_i2c_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_ARCH_MX31
+const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst = {
+#define imx31_imx_i2c_data_entry(_id, _hwid) \
+ imx_imx_i2c_data_entry(MX31, _id, _hwid, SZ_4K)
+ imx31_imx_i2c_data_entry(0, 1),
+ imx31_imx_i2c_data_entry(1, 2),
+ imx31_imx_i2c_data_entry(2, 3),
+};
+#endif /* ifdef CONFIG_ARCH_MX31 */
+
+#ifdef CONFIG_ARCH_MX35
+const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst = {
+#define imx35_imx_i2c_data_entry(_id, _hwid) \
+ imx_imx_i2c_data_entry(MX35, _id, _hwid, SZ_4K)
+ imx35_imx_i2c_data_entry(0, 1),
+ imx35_imx_i2c_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_ARCH_MX35 */
+
+#ifdef CONFIG_ARCH_MX51
+const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst = {
+#define imx51_imx_i2c_data_entry(_id, _hwid) \
+ imx_imx_i2c_data_entry(MX51, _id, _hwid, SZ_4K)
+ imx51_imx_i2c_data_entry(0, 1),
+ imx51_imx_i2c_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_ARCH_MX51 */
+
+struct platform_device *__init imx_add_imx_i2c(
+ const struct imx_imx_i2c_data *data,
const struct imxi2c_platform_data *pdata)
{
struct resource res[] = {
{
- .start = iobase,
- .end = iobase + iosize - 1,
+ .start = data->iobase,
+ .end = data->iobase + data->iosize - 1,
.flags = IORESOURCE_MEM,
}, {
- .start = irq,
- .end = irq,
+ .start = data->irq,
+ .end = data->irq,
.flags = IORESOURCE_IRQ,
},
};
- return imx_add_platform_device("imx-i2c", id, res, ARRAY_SIZE(res),
+ return imx_add_platform_device("imx-i2c", data->id,
+ res, ARRAY_SIZE(res),
pdata, sizeof(*pdata));
}
diff --git a/arch/arm/plat-mxc/devices/platform-imx-ssi.c b/arch/arm/plat-mxc/devices/platform-imx-ssi.c
new file mode 100644
index 0000000..38a7a0b
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-imx-ssi.c
@@ -0,0 +1,107 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_imx_ssi_data_entry(soc, _id, _hwid, _size) \
+ [_id] = { \
+ .id = _id, \
+ .iobase = soc ## _SSI ## _hwid ## _BASE_ADDR, \
+ .iosize = _size, \
+ .irq = soc ## _INT_SSI ## _hwid, \
+ .dmatx0 = soc ## _DMA_REQ_SSI ## _hwid ## _TX0, \
+ .dmarx0 = soc ## _DMA_REQ_SSI ## _hwid ## _RX0, \
+ .dmatx1 = soc ## _DMA_REQ_SSI ## _hwid ## _TX1, \
+ .dmarx1 = soc ## _DMA_REQ_SSI ## _hwid ## _RX1, \
+ }
+
+#ifdef CONFIG_SOC_IMX21
+const struct imx_imx_ssi_data imx21_imx_ssi_data[] __initconst = {
+#define imx21_imx_ssi_data_entry(_id, _hwid) \
+ imx_imx_ssi_data_entry(MX21, _id, _hwid, SZ_4K)
+ imx21_imx_ssi_data_entry(0, 1),
+ imx21_imx_ssi_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX21 */
+
+#ifdef CONFIG_ARCH_MX25
+const struct imx_imx_ssi_data imx25_imx_ssi_data[] __initconst = {
+#define imx25_imx_ssi_data_entry(_id, _hwid) \
+ imx_imx_ssi_data_entry(MX25, _id, _hwid, SZ_4K)
+ imx25_imx_ssi_data_entry(0, 1),
+ imx25_imx_ssi_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_ARCH_MX25 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_imx_ssi_data imx27_imx_ssi_data[] __initconst = {
+#define imx27_imx_ssi_data_entry(_id, _hwid) \
+ imx_imx_ssi_data_entry(MX27, _id, _hwid, SZ_4K)
+ imx27_imx_ssi_data_entry(0, 1),
+ imx27_imx_ssi_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_ARCH_MX31
+const struct imx_imx_ssi_data imx31_imx_ssi_data[] __initconst = {
+#define imx31_imx_ssi_data_entry(_id, _hwid) \
+ imx_imx_ssi_data_entry(MX31, _id, _hwid, SZ_4K)
+ imx31_imx_ssi_data_entry(0, 1),
+ imx31_imx_ssi_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_ARCH_MX31 */
+
+#ifdef CONFIG_ARCH_MX35
+const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst = {
+#define imx35_imx_ssi_data_entry(_id, _hwid) \
+ imx_imx_ssi_data_entry(MX35, _id, _hwid, SZ_4K)
+ imx35_imx_ssi_data_entry(0, 1),
+ imx35_imx_ssi_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_ARCH_MX35 */
+
+#ifdef CONFIG_ARCH_MX51
+const struct imx_imx_ssi_data imx51_imx_ssi_data[] __initconst = {
+#define imx51_imx_ssi_data_entry(_id, _hwid) \
+ imx_imx_ssi_data_entry(MX51, _id, _hwid, SZ_4K)
+ imx51_imx_ssi_data_entry(0, 1),
+ imx51_imx_ssi_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_ARCH_MX51 */
+
+struct platform_device *__init imx_add_imx_ssi(
+ const struct imx_imx_ssi_data *data,
+ const struct imx_ssi_platform_data *pdata)
+{
+ struct resource res[] = {
+ {
+ .start = data->iobase,
+ .end = data->iobase + data->iosize - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = data->irq,
+ .end = data->irq,
+ .flags = IORESOURCE_IRQ,
+ },
+#define DMARES(_name) { \
+ .name = #_name, \
+ .start = data->dma ## _name, \
+ .end = data->dma ## _name, \
+ .flags = IORESOURCE_DMA, \
+}
+ DMARES(tx0),
+ DMARES(rx0),
+ DMARES(tx1),
+ DMARES(rx1),
+ };
+
+ return imx_add_platform_device("imx-ssi", data->id,
+ res, ARRAY_SIZE(res),
+ pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-imx-uart.c b/arch/arm/plat-mxc/devices/platform-imx-uart.c
index fa3dff1..2039640 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-uart.c
+++ b/arch/arm/plat-mxc/devices/platform-imx-uart.c
@@ -6,55 +6,148 @@
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
+#include <mach/hardware.h>
#include <mach/devices-common.h>
-struct platform_device *__init imx_add_imx_uart_3irq(int id,
- resource_size_t iobase, resource_size_t iosize,
- resource_size_t irqrx, resource_size_t irqtx,
- resource_size_t irqrts,
+#define imx_imx_uart_3irq_data_entry(soc, _id, _hwid, _size) \
+ [_id] = { \
+ .id = _id, \
+ .iobase = soc ## _UART ## _hwid ## _BASE_ADDR, \
+ .iosize = _size, \
+ .irqrx = soc ## _INT_UART ## _hwid ## RX, \
+ .irqtx = soc ## _INT_UART ## _hwid ## TX, \
+ .irqrts = soc ## _INT_UART ## _hwid ## RTS, \
+ }
+
+#define imx_imx_uart_1irq_data_entry(soc, _id, _hwid, _size) \
+ [_id] = { \
+ .id = _id, \
+ .iobase = soc ## _UART ## _hwid ## _BASE_ADDR, \
+ .iosize = _size, \
+ .irq = soc ## _INT_UART ## _hwid, \
+ }
+
+#ifdef CONFIG_SOC_IMX1
+const struct imx_imx_uart_3irq_data imx1_imx_uart_data[] __initconst = {
+#define imx1_imx_uart_data_entry(_id, _hwid) \
+ imx_imx_uart_3irq_data_entry(MX1, _id, _hwid, 0xd0)
+ imx1_imx_uart_data_entry(0, 1),
+ imx1_imx_uart_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX1 */
+
+#ifdef CONFIG_SOC_IMX21
+const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst = {
+#define imx21_imx_uart_data_entry(_id, _hwid) \
+ imx_imx_uart_1irq_data_entry(MX21, _id, _hwid, SZ_4K)
+ imx21_imx_uart_data_entry(0, 1),
+ imx21_imx_uart_data_entry(1, 2),
+ imx21_imx_uart_data_entry(2, 3),
+ imx21_imx_uart_data_entry(3, 4),
+};
+#endif
+
+#ifdef CONFIG_ARCH_MX25
+const struct imx_imx_uart_1irq_data imx25_imx_uart_data[] __initconst = {
+#define imx25_imx_uart_data_entry(_id, _hwid) \
+ imx_imx_uart_1irq_data_entry(MX25, _id, _hwid, SZ_16K)
+ imx25_imx_uart_data_entry(0, 1),
+ imx25_imx_uart_data_entry(1, 2),
+ imx25_imx_uart_data_entry(2, 3),
+ imx25_imx_uart_data_entry(3, 4),
+ imx25_imx_uart_data_entry(4, 5),
+};
+#endif /* ifdef CONFIG_ARCH_MX25 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst = {
+#define imx27_imx_uart_data_entry(_id, _hwid) \
+ imx_imx_uart_1irq_data_entry(MX27, _id, _hwid, SZ_4K)
+ imx27_imx_uart_data_entry(0, 1),
+ imx27_imx_uart_data_entry(1, 2),
+ imx27_imx_uart_data_entry(2, 3),
+ imx27_imx_uart_data_entry(3, 4),
+ imx27_imx_uart_data_entry(4, 5),
+ imx27_imx_uart_data_entry(5, 6),
+};
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_ARCH_MX31
+const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst = {
+#define imx31_imx_uart_data_entry(_id, _hwid) \
+ imx_imx_uart_1irq_data_entry(MX31, _id, _hwid, SZ_4K)
+ imx31_imx_uart_data_entry(0, 1),
+ imx31_imx_uart_data_entry(1, 2),
+ imx31_imx_uart_data_entry(2, 3),
+ imx31_imx_uart_data_entry(3, 4),
+ imx31_imx_uart_data_entry(4, 5),
+};
+#endif /* ifdef CONFIG_ARCH_MX31 */
+
+#ifdef CONFIG_ARCH_MX35
+const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst = {
+#define imx35_imx_uart_data_entry(_id, _hwid) \
+ imx_imx_uart_1irq_data_entry(MX31, _id, _hwid, SZ_16K)
+ imx35_imx_uart_data_entry(0, 1),
+ imx35_imx_uart_data_entry(1, 2),
+ imx35_imx_uart_data_entry(2, 3),
+};
+#endif /* ifdef CONFIG_ARCH_MX35 */
+
+#ifdef CONFIG_ARCH_MX51
+const struct imx_imx_uart_1irq_data imx51_imx_uart_data[] __initconst = {
+#define imx51_imx_uart_data_entry(_id, _hwid) \
+ imx_imx_uart_1irq_data_entry(MX51, _id, _hwid, SZ_4K)
+ imx51_imx_uart_data_entry(0, 1),
+ imx51_imx_uart_data_entry(1, 2),
+ imx51_imx_uart_data_entry(2, 3),
+};
+#endif /* ifdef CONFIG_ARCH_MX51 */
+
+struct platform_device *__init imx_add_imx_uart_3irq(
+ const struct imx_imx_uart_3irq_data *data,
const struct imxuart_platform_data *pdata)
{
struct resource res[] = {
{
- .start = iobase,
- .end = iobase + iosize - 1,
+ .start = data->iobase,
+ .end = data->iobase + data->iosize - 1,
.flags = IORESOURCE_MEM,
}, {
- .start = irqrx,
- .end = irqrx,
+ .start = data->irqrx,
+ .end = data->irqrx,
.flags = IORESOURCE_IRQ,
}, {
- .start = irqtx,
- .end = irqtx,
+ .start = data->irqtx,
+ .end = data->irqtx,
.flags = IORESOURCE_IRQ,
}, {
- .start = irqrts,
- .end = irqrx,
+ .start = data->irqrts,
+ .end = data->irqrx,
.flags = IORESOURCE_IRQ,
},
};
- return imx_add_platform_device("imx-uart", id, res, ARRAY_SIZE(res),
- pdata, sizeof(*pdata));
+ return imx_add_platform_device("imx-uart", data->id, res,
+ ARRAY_SIZE(res), pdata, sizeof(*pdata));
}
-struct platform_device *__init imx_add_imx_uart_1irq(int id,
- resource_size_t iobase, resource_size_t iosize,
- resource_size_t irq,
+struct platform_device *__init imx_add_imx_uart_1irq(
+ const struct imx_imx_uart_1irq_data *data,
const struct imxuart_platform_data *pdata)
{
struct resource res[] = {
{
- .start = iobase,
- .end = iobase + iosize - 1,
+ .start = data->iobase,
+ .end = data->iobase + data->iosize - 1,
.flags = IORESOURCE_MEM,
}, {
- .start = irq,
- .end = irq,
+ .start = data->irq,
+ .end = data->irq,
.flags = IORESOURCE_IRQ,
},
};
- return imx_add_platform_device("imx-uart", id, res, ARRAY_SIZE(res),
+ return imx_add_platform_device("imx-uart", data->id, res, ARRAY_SIZE(res),
pdata, sizeof(*pdata));
}
diff --git a/arch/arm/plat-mxc/devices/platform-mxc_nand.c b/arch/arm/plat-mxc/devices/platform-mxc_nand.c
index 1c28641..3fdcc32 100644
--- a/arch/arm/plat-mxc/devices/platform-mxc_nand.c
+++ b/arch/arm/plat-mxc/devices/platform-mxc_nand.c
@@ -7,38 +7,77 @@
* Free Software Foundation.
*/
#include <asm/sizes.h>
+#include <mach/hardware.h>
#include <mach/devices-common.h>
-static struct platform_device *__init imx_add_mxc_nand(resource_size_t iobase,
- int irq, const struct mxc_nand_platform_data *pdata,
- resource_size_t iosize)
+#define imx_mxc_nand_data_entry_single(soc, _size) \
+ { \
+ .iobase = soc ## _NFC_BASE_ADDR, \
+ .iosize = _size, \
+ .irq = soc ## _INT_NFC \
+ }
+
+#define imx_mxc_nandv3_data_entry_single(soc, _size) \
+ { \
+ .id = -1, \
+ .iobase = soc ## _NFC_BASE_ADDR, \
+ .iosize = _size, \
+ .axibase = soc ## _NFC_AXI_BASE_ADDR, \
+ .irq = soc ## _INT_NFC \
+ }
+
+#ifdef CONFIG_SOC_IMX21
+const struct imx_mxc_nand_data imx21_mxc_nand_data __initconst =
+ imx_mxc_nand_data_entry_single(MX21, SZ_4K);
+#endif /* ifdef CONFIG_SOC_IMX21 */
+
+#ifdef CONFIG_ARCH_MX25
+const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst =
+ imx_mxc_nand_data_entry_single(MX25, SZ_8K);
+#endif /* ifdef CONFIG_ARCH_MX25 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst =
+ imx_mxc_nand_data_entry_single(MX27, SZ_4K);
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_ARCH_MX31
+const struct imx_mxc_nand_data imx31_mxc_nand_data __initconst =
+ imx_mxc_nand_data_entry_single(MX31, SZ_4K);
+#endif
+
+#ifdef CONFIG_ARCH_MX35
+const struct imx_mxc_nand_data imx35_mxc_nand_data __initconst =
+ imx_mxc_nand_data_entry_single(MX35, SZ_8K);
+#endif
+
+#ifdef CONFIG_ARCH_MX51
+const struct imx_mxc_nand_data imx51_mxc_nand_data __initconst =
+ imx_mxc_nandv3_data_entry_single(MX51, SZ_16K);
+#endif
+
+struct platform_device *__init imx_add_mxc_nand(
+ const struct imx_mxc_nand_data *data,
+ const struct mxc_nand_platform_data *pdata)
{
- static int id = 0;
-
+ /* AXI has to come first, that's how the mxc_nand driver expect it */
struct resource res[] = {
{
- .start = iobase,
- .end = iobase + iosize - 1,
+ .start = data->axibase,
+ .end = data->axibase + SZ_16K - 1,
.flags = IORESOURCE_MEM,
}, {
- .start = irq,
- .end = irq,
+ .start = data->iobase,
+ .end = data->iobase + data->iosize - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = data->irq,
+ .end = data->irq,
.flags = IORESOURCE_IRQ,
},
};
-
- return imx_add_platform_device("mxc_nand", id++, res, ARRAY_SIZE(res),
+ return imx_add_platform_device("mxc_nand", data->id,
+ res + !data->axibase,
+ ARRAY_SIZE(res) - !data->axibase,
pdata, sizeof(*pdata));
}
-
-struct platform_device *__init imx_add_mxc_nand_v1(resource_size_t iobase,
- int irq, const struct mxc_nand_platform_data *pdata)
-{
- return imx_add_mxc_nand(iobase, irq, pdata, SZ_4K);
-}
-
-struct platform_device *__init imx_add_mxc_nand_v21(resource_size_t iobase,
- int irq, const struct mxc_nand_platform_data *pdata)
-{
- return imx_add_mxc_nand(iobase, irq, pdata, SZ_8K);
-}
diff --git a/arch/arm/plat-mxc/devices/platform-spi_imx.c b/arch/arm/plat-mxc/devices/platform-spi_imx.c
index 2831a6d..e48340e 100644
--- a/arch/arm/plat-mxc/devices/platform-spi_imx.c
+++ b/arch/arm/plat-mxc/devices/platform-spi_imx.c
@@ -6,25 +6,96 @@
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <asm/sizes.h>
+#include <mach/hardware.h>
#include <mach/devices-common.h>
-struct platform_device *__init imx_add_spi_imx(int id,
- resource_size_t iobase, resource_size_t iosize, int irq,
+#define imx_spi_imx_data_entry_single(soc, type, _devid, _id, hwid, _size) \
+ { \
+ .devid = _devid, \
+ .id = _id, \
+ .iobase = soc ## _ ## type ## hwid ## _BASE_ADDR, \
+ .iosize = _size, \
+ .irq = soc ## _INT_ ## type ## hwid, \
+ }
+
+#define imx_spi_imx_data_entry(soc, type, devid, id, hwid, size) \
+ [id] = imx_spi_imx_data_entry_single(soc, type, devid, id, hwid, size)
+
+#ifdef CONFIG_SOC_IMX21
+const struct imx_spi_imx_data imx21_cspi_data[] __initconst = {
+#define imx21_cspi_data_entry(_id, _hwid) \
+ imx_spi_imx_data_entry(MX21, CSPI, "imx21-cspi", _id, _hwid, SZ_4K)
+ imx21_cspi_data_entry(0, 1),
+ imx21_cspi_data_entry(1, 2),
+#endif
+
+#ifdef CONFIG_ARCH_MX25
+const struct imx_spi_imx_data imx25_cspi_data[] __initconst = {
+#define imx25_cspi_data_entry(_id, _hwid) \
+ imx_spi_imx_data_entry(MX25, CSPI, "imx25-cspi", _id, _hwid, SZ_16K)
+ imx25_cspi_data_entry(0, 1),
+ imx25_cspi_data_entry(1, 2),
+ imx25_cspi_data_entry(2, 3),
+};
+#endif /* ifdef CONFIG_ARCH_MX25 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_spi_imx_data imx27_cspi_data[] __initconst = {
+#define imx27_cspi_data_entry(_id, _hwid) \
+ imx_spi_imx_data_entry(MX27, CSPI, "imx27-cspi", _id, _hwid, SZ_4K)
+ imx27_cspi_data_entry(0, 1),
+ imx27_cspi_data_entry(1, 2),
+ imx27_cspi_data_entry(2, 3),
+};
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_ARCH_MX31
+const struct imx_spi_imx_data imx31_cspi_data[] __initconst = {
+#define imx31_cspi_data_entry(_id, _hwid) \
+ imx_spi_imx_data_entry(MX31, CSPI, "imx31-cspi", _id, _hwid, SZ_4K)
+ imx31_cspi_data_entry(0, 1),
+ imx31_cspi_data_entry(1, 2),
+ imx31_cspi_data_entry(2, 3),
+};
+#endif /* ifdef CONFIG_ARCH_MX31 */
+
+#ifdef CONFIG_ARCH_MX35
+const struct imx_spi_imx_data imx35_cspi_data[] __initconst = {
+#define imx35_cspi_data_entry(_id, _hwid) \
+ imx_spi_imx_data_entry(MX35, CSPI, "imx35-cspi", _id, _hwid, SZ_4K)
+ imx35_cspi_data_entry(0, 1),
+ imx35_cspi_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_ARCH_MX35 */
+
+#ifdef CONFIG_ARCH_MX51
+const struct imx_spi_imx_data imx51_cspi_data __initconst =
+ imx_spi_imx_data_entry_single(MX51, CSPI, "imx51-cspi", 0, , SZ_4K);
+
+const struct imx_spi_imx_data imx51_ecspi_data[] __initconst = {
+#define imx51_ecspi_data_entry(_id, _hwid) \
+ imx_spi_imx_data_entry(MX51, ECSPI, "imx51-ecspi", _id, _hwid, SZ_4K)
+ imx51_ecspi_data_entry(0, 1),
+ imx51_ecspi_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_ARCH_MX51 */
+
+struct platform_device *__init imx_add_spi_imx(
+ const struct imx_spi_imx_data *data,
const struct spi_imx_master *pdata)
{
struct resource res[] = {
{
- .start = iobase,
- .end = iobase + iosize - 1,
+ .start = data->iobase,
+ .end = data->iobase + data->iosize - 1,
.flags = IORESOURCE_MEM,
}, {
- .start = irq,
- .end = irq,
+ .start = data->irq,
+ .end = data->irq,
.flags = IORESOURCE_IRQ,
},
};
- return imx_add_platform_device("spi_imx", id, res, ARRAY_SIZE(res),
- pdata, sizeof(*pdata));
+ return imx_add_platform_device(data->devid, data->id,
+ res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
}
diff --git a/arch/arm/plat-mxc/ehci.c b/arch/arm/plat-mxc/ehci.c
index 35a064f..9915607 100644
--- a/arch/arm/plat-mxc/ehci.c
+++ b/arch/arm/plat-mxc/ehci.c
@@ -249,8 +249,8 @@
#ifdef CONFIG_ARCH_MX51
if (cpu_is_mx51()) {
void __iomem *usb_base;
- u32 usbotg_base;
- u32 usbother_base;
+ void __iomem *usbotg_base;
+ void __iomem *usbother_base;
int ret = 0;
usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
diff --git a/arch/arm/plat-mxc/epit.c b/arch/arm/plat-mxc/epit.c
new file mode 100644
index 0000000..ee9582f
--- /dev/null
+++ b/arch/arm/plat-mxc/epit.c
@@ -0,0 +1,242 @@
+/*
+ * linux/arch/arm/plat-mxc/epit.c
+ *
+ * Copyright (C) 2010 Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#define EPITCR 0x00
+#define EPITSR 0x04
+#define EPITLR 0x08
+#define EPITCMPR 0x0c
+#define EPITCNR 0x10
+
+#define EPITCR_EN (1 << 0)
+#define EPITCR_ENMOD (1 << 1)
+#define EPITCR_OCIEN (1 << 2)
+#define EPITCR_RLD (1 << 3)
+#define EPITCR_PRESC(x) (((x) & 0xfff) << 4)
+#define EPITCR_SWR (1 << 16)
+#define EPITCR_IOVW (1 << 17)
+#define EPITCR_DBGEN (1 << 18)
+#define EPITCR_WAITEN (1 << 19)
+#define EPITCR_RES (1 << 20)
+#define EPITCR_STOPEN (1 << 21)
+#define EPITCR_OM_DISCON (0 << 22)
+#define EPITCR_OM_TOGGLE (1 << 22)
+#define EPITCR_OM_CLEAR (2 << 22)
+#define EPITCR_OM_SET (3 << 22)
+#define EPITCR_CLKSRC_OFF (0 << 24)
+#define EPITCR_CLKSRC_PERIPHERAL (1 << 24)
+#define EPITCR_CLKSRC_REF_HIGH (1 << 24)
+#define EPITCR_CLKSRC_REF_LOW (3 << 24)
+
+#define EPITSR_OCIF (1 << 0)
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/clockchips.h>
+#include <linux/clk.h>
+
+#include <mach/hardware.h>
+#include <asm/mach/time.h>
+#include <mach/common.h>
+
+static struct clock_event_device clockevent_epit;
+static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
+
+static void __iomem *timer_base;
+
+static inline void epit_irq_disable(void)
+{
+ u32 val;
+
+ val = __raw_readl(timer_base + EPITCR);
+ val &= ~EPITCR_OCIEN;
+ __raw_writel(val, timer_base + EPITCR);
+}
+
+static inline void epit_irq_enable(void)
+{
+ u32 val;
+
+ val = __raw_readl(timer_base + EPITCR);
+ val |= EPITCR_OCIEN;
+ __raw_writel(val, timer_base + EPITCR);
+}
+
+static void epit_irq_acknowledge(void)
+{
+ __raw_writel(EPITSR_OCIF, timer_base + EPITSR);
+}
+
+static cycle_t epit_read(struct clocksource *cs)
+{
+ return 0 - __raw_readl(timer_base + EPITCNR);
+}
+
+static struct clocksource clocksource_epit = {
+ .name = "epit",
+ .rating = 200,
+ .read = epit_read,
+ .mask = CLOCKSOURCE_MASK(32),
+ .shift = 20,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int __init epit_clocksource_init(struct clk *timer_clk)
+{
+ unsigned int c = clk_get_rate(timer_clk);
+
+ clocksource_epit.mult = clocksource_hz2mult(c,
+ clocksource_epit.shift);
+ clocksource_register(&clocksource_epit);
+
+ return 0;
+}
+
+/* clock event */
+
+static int epit_set_next_event(unsigned long evt,
+ struct clock_event_device *unused)
+{
+ unsigned long tcmp;
+
+ tcmp = __raw_readl(timer_base + EPITCNR);
+
+ __raw_writel(tcmp - evt, timer_base + EPITCMPR);
+
+ return 0;
+}
+
+static void epit_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ unsigned long flags;
+
+ /*
+ * The timer interrupt generation is disabled at least
+ * for enough time to call epit_set_next_event()
+ */
+ local_irq_save(flags);
+
+ /* Disable interrupt in GPT module */
+ epit_irq_disable();
+
+ if (mode != clockevent_mode) {
+ /* Set event time into far-far future */
+
+ /* Clear pending interrupt */
+ epit_irq_acknowledge();
+ }
+
+ /* Remember timer mode */
+ clockevent_mode = mode;
+ local_irq_restore(flags);
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ printk(KERN_ERR "epit_set_mode: Periodic mode is not "
+ "supported for i.MX EPIT\n");
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ /*
+ * Do not put overhead of interrupt enable/disable into
+ * epit_set_next_event(), the core has about 4 minutes
+ * to call epit_set_next_event() or shutdown clock after
+ * mode switching
+ */
+ local_irq_save(flags);
+ epit_irq_enable();
+ local_irq_restore(flags);
+ break;
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_RESUME:
+ /* Left event sources disabled, no more interrupts appear */
+ break;
+ }
+}
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t epit_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = &clockevent_epit;
+
+ epit_irq_acknowledge();
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction epit_timer_irq = {
+ .name = "i.MX EPIT Timer Tick",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = epit_timer_interrupt,
+};
+
+static struct clock_event_device clockevent_epit = {
+ .name = "epit",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .shift = 32,
+ .set_mode = epit_set_mode,
+ .set_next_event = epit_set_next_event,
+ .rating = 200,
+};
+
+static int __init epit_clockevent_init(struct clk *timer_clk)
+{
+ unsigned int c = clk_get_rate(timer_clk);
+
+ clockevent_epit.mult = div_sc(c, NSEC_PER_SEC,
+ clockevent_epit.shift);
+ clockevent_epit.max_delta_ns =
+ clockevent_delta2ns(0xfffffffe, &clockevent_epit);
+ clockevent_epit.min_delta_ns =
+ clockevent_delta2ns(0x800, &clockevent_epit);
+
+ clockevent_epit.cpumask = cpumask_of(0);
+
+ clockevents_register_device(&clockevent_epit);
+
+ return 0;
+}
+
+void __init epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
+{
+ clk_enable(timer_clk);
+
+ timer_base = base;
+
+ /*
+ * Initialise to a known state (all timers off, and timing reset)
+ */
+ __raw_writel(0x0, timer_base + EPITCR);
+
+ __raw_writel(0xffffffff, timer_base + EPITLR);
+ __raw_writel(EPITCR_EN | EPITCR_CLKSRC_REF_HIGH | EPITCR_WAITEN,
+ timer_base + EPITCR);
+
+ /* init and register the timer to the framework */
+ epit_clocksource_init(timer_clk);
+ epit_clockevent_init(timer_clk);
+
+ /* Make irqs happen */
+ setup_irq(irq, &epit_timer_irq);
+}
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index 57ec4a8..9d38da0 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -235,7 +235,7 @@
unsigned long flags;
spin_lock_irqsave(&port->lock, flags);
- l = (__raw_readl(reg) & (~(1 << offset))) | (value << offset);
+ l = (__raw_readl(reg) & (~(1 << offset))) | (!!value << offset);
__raw_writel(l, reg);
spin_unlock_irqrestore(&port->lock, flags);
}
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 2941472..7a1e1f8 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -32,6 +32,7 @@
extern void mx35_init_irq(void);
extern void mx51_init_irq(void);
extern void mxc91231_init_irq(void);
+extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq);
extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
extern int mx1_clocks_init(unsigned long fref);
extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h
index c5f68c5..0498978 100644
--- a/arch/arm/plat-mxc/include/mach/devices-common.h
+++ b/arch/arm/plat-mxc/include/mach/devices-common.h
@@ -14,47 +14,101 @@
const struct resource *res, unsigned int num_resources,
const void *data, size_t size_data);
-#if defined (CONFIG_CAN_FLEXCAN) || defined (CONFIG_CAN_FLEXCAN_MODULE)
+#include <linux/fec.h>
+struct imx_fec_data {
+ resource_size_t iobase;
+ resource_size_t irq;
+};
+struct platform_device *__init imx_add_fec(
+ const struct imx_fec_data *data,
+ const struct fec_platform_data *pdata);
+
#include <linux/can/platform/flexcan.h>
struct platform_device *__init imx_add_flexcan(int id,
resource_size_t iobase, resource_size_t iosize,
resource_size_t irq,
const struct flexcan_platform_data *pdata);
-#else
-/* the ifdef can be removed once the flexcan driver has been merged */
-struct flexcan_platform_data;
-static inline struct platform_device *__init imx_add_flexcan(int id,
- resource_size_t iobase, resource_size_t iosize,
- resource_size_t irq,
- const struct flexcan_platform_data *pdata)
-{
- return NULL;
-}
-#endif
#include <mach/i2c.h>
-struct platform_device *__init imx_add_imx_i2c(int id,
- resource_size_t iobase, resource_size_t iosize, int irq,
+struct imx_imx_i2c_data {
+ int id;
+ resource_size_t iobase;
+ resource_size_t iosize;
+ resource_size_t irq;
+};
+struct platform_device *__init imx_add_imx_i2c(
+ const struct imx_imx_i2c_data *data,
const struct imxi2c_platform_data *pdata);
+#include <mach/ssi.h>
+struct imx_imx_ssi_data {
+ int id;
+ resource_size_t iobase;
+ resource_size_t iosize;
+ resource_size_t irq;
+ resource_size_t dmatx0;
+ resource_size_t dmarx0;
+ resource_size_t dmatx1;
+ resource_size_t dmarx1;
+};
+struct platform_device *__init imx_add_imx_ssi(
+ const struct imx_imx_ssi_data *data,
+ const struct imx_ssi_platform_data *pdata);
+
#include <mach/imx-uart.h>
-struct platform_device *__init imx_add_imx_uart_3irq(int id,
- resource_size_t iobase, resource_size_t iosize,
- resource_size_t irqrx, resource_size_t irqtx,
- resource_size_t irqrts,
+struct imx_imx_uart_3irq_data {
+ int id;
+ resource_size_t iobase;
+ resource_size_t iosize;
+ resource_size_t irqrx;
+ resource_size_t irqtx;
+ resource_size_t irqrts;
+};
+struct platform_device *__init imx_add_imx_uart_3irq(
+ const struct imx_imx_uart_3irq_data *data,
const struct imxuart_platform_data *pdata);
-struct platform_device *__init imx_add_imx_uart_1irq(int id,
- resource_size_t iobase, resource_size_t iosize,
- resource_size_t irq,
+
+struct imx_imx_uart_1irq_data {
+ int id;
+ resource_size_t iobase;
+ resource_size_t iosize;
+ resource_size_t irq;
+};
+struct platform_device *__init imx_add_imx_uart_1irq(
+ const struct imx_imx_uart_1irq_data *data,
const struct imxuart_platform_data *pdata);
#include <mach/mxc_nand.h>
-struct platform_device *__init imx_add_mxc_nand_v1(resource_size_t iobase,
- int irq, const struct mxc_nand_platform_data *pdata);
-struct platform_device *__init imx_add_mxc_nand_v21(resource_size_t iobase,
- int irq, const struct mxc_nand_platform_data *pdata);
+struct imx_mxc_nand_data {
+ /*
+ * id is traditionally 0, but -1 is more appropriate. We use -1 for new
+ * machines but don't change existing devices as the nand device usually
+ * appears in the kernel command line to pass its partitioning.
+ */
+ int id;
+ resource_size_t iobase;
+ resource_size_t iosize;
+ resource_size_t axibase;
+ resource_size_t irq;
+};
+struct platform_device *__init imx_add_mxc_nand(
+ const struct imx_mxc_nand_data *data,
+ const struct mxc_nand_platform_data *pdata);
#include <mach/spi.h>
-struct platform_device *__init imx_add_spi_imx(int id,
- resource_size_t iobase, resource_size_t iosize, int irq,
+struct imx_spi_imx_data {
+ const char *devid;
+ int id;
+ resource_size_t iobase;
+ resource_size_t iosize;
+ int irq;
+};
+struct platform_device *__init imx_add_spi_imx(
+ const struct imx_spi_imx_data *data,
const struct spi_imx_master *pdata);
+
+#include <mach/esdhc.h>
+struct platform_device *__init imx_add_esdhc(int id,
+ resource_size_t iobase, resource_size_t iosize,
+ resource_size_t irq,
+ const struct esdhc_platform_data *pdata);
diff --git a/arch/arm/plat-mxc/include/mach/esdhc.h b/arch/arm/plat-mxc/include/mach/esdhc.h
new file mode 100644
index 0000000..a48a9aa
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/esdhc.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright 2010 Wolfram Sang <w.sang@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#ifndef __ASM_ARCH_IMX_ESDHC_H
+#define __ASM_ARCH_IMX_ESDHC_H
+
+struct esdhc_platform_data {
+ unsigned int wp_gpio; /* write protect pin */
+};
+#endif /* __ASM_ARCH_IMX_ESDHC_H */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
index 21bfa46..5160f10 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx51.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
@@ -45,6 +45,15 @@
PAD_CTL_PKE | PAD_CTL_HYS)
#define MX51_GPIO_PAD_CTRL (PAD_CTL_DSE_HIGH | PAD_CTL_PKE | \
PAD_CTL_SRE_FAST)
+#define MX51_ECSPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \
+ PAD_CTL_SRE_FAST)
+
+#define MX51_PAD_CTRL_1 (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \
+ PAD_CTL_PUE | PAD_CTL_PKE | PAD_CTL_HYS)
+#define MX51_PAD_CTRL_2 (PAD_CTL_HYS | PAD_CTL_PKE)
+#define MX51_PAD_CTRL_3 (PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
+#define MX51_PAD_CTRL_4 (PAD_CTL_DVS | PAD_CTL_HYS | PAD_CTL_PKE)
+#define MX51_PAD_CTRL_5 (PAD_CTL_DVS | PAD_CTL_DSE_HIGH)
/*
* The naming convention for the pad modes is MX51_PAD_<padname>__<padmode>
@@ -106,14 +115,20 @@
#define MX51_PAD_EIM_EB0__EIM_EB0 IOMUX_PAD(0x460, 0x0cc, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_EIM_EB1__EIM_EB1 IOMUX_PAD(0x464, 0x0d0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_EIM_EB2__GPIO_2_22 IOMUX_PAD(0x468, 0x0d4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB2__FEC_MDIO IOMUX_PAD(0x468, 0x0d4, 3, 0x0, 0, MX51_PAD_CTRL_1 | PAD_CTL_PUS_22K_UP)
#define MX51_PAD_EIM_EB3__GPIO_2_23 IOMUX_PAD(0x46c, 0x0d8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB3__FEC_RDAT1 IOMUX_PAD(0x46c, 0x0d8, 3, 0x0, 0, MX51_PAD_CTRL_2)
#define MX51_PAD_EIM_OE__GPIO_2_24 IOMUX_PAD(0x470, 0x0dc, 1, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_EIM_CS0__GPIO_2_25 IOMUX_PAD(0x474, 0x0e0, 1, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_EIM_CS1__GPIO_2_26 IOMUX_PAD(0x478, 0x0e4, 1, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_EIM_CS2__GPIO_2_27 IOMUX_PAD(0x47c, 0x0e8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS2__FEC_RDAT2 IOMUX_PAD(0x47c, 0x0e8, 3, 0x0, 0, MX51_PAD_CTRL_2)
#define MX51_PAD_EIM_CS3__GPIO_2_28 IOMUX_PAD(0x480, 0x0ec, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS3__FEC_RDAT3 IOMUX_PAD(0x480, 0x0ec, 3, 0x0, 0, MX51_PAD_CTRL_2)
#define MX51_PAD_EIM_CS4__GPIO_2_29 IOMUX_PAD(0x484, 0x0f0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS4__FEC_RX_ER IOMUX_PAD(0x484, 0x0f0, 3, 0x0, 0, MX51_PAD_CTRL_2)
#define MX51_PAD_EIM_CS5__GPIO_2_30 IOMUX_PAD(0x488, 0x0f4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS5__FEC_CRS IOMUX_PAD(0x488, 0x0f4, 3, 0x0, 0, MX51_PAD_CTRL_2)
#define MX51_PAD_EIM_DTACK__GPIO_2_31 IOMUX_PAD(0x48c, 0x0f8, 1, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_EIM_LBA__GPIO_3_1 IOMUX_PAD(0x494, 0x0FC, 1, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_EIM_CRE__GPIO_3_2 IOMUX_PAD(0x4A0, 0x100, 1, 0x0, 0, NO_PAD_CTRL)
@@ -126,18 +141,32 @@
#define MX51_PAD_NANDF_RB0__GPIO_3_8 IOMUX_PAD(0x4F8, 0x11C, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_NANDF_RB1__GPIO_3_9 IOMUX_PAD(0x4FC, 0x120, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_NANDF_RB2__GPIO_3_10 IOMUX_PAD(0x500, 0x124, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB2__ECSPI2_SCLK IOMUX_PAD(0x500, 0x124, 2, 0x0, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_NANDF_RB2__FEC_COL IOMUX_PAD(0x500, 0x124, 1, 0x0, 0, MX51_PAD_CTRL_2)
#define MX51_PAD_NANDF_RB3__GPIO_3_11 IOMUX_PAD(0x504, 0x128, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB3__ECSPI2_MISO IOMUX_PAD(0x504, 0x128, 2, 0x0, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_NANDF_RB3__FEC_RXCLK IOMUX_PAD(0x504, 0x128, 1, 0x0, 0, MX51_PAD_CTRL_2)
+#define MX51_PAD_NANDF_RB6__FEC_RDAT0 IOMUX_PAD(0x5DC, 0x134, 1, 0x0, 0, MX51_PAD_CTRL_4)
+#define MX51_PAD_NANDF_RB7__FEC_TDAT0 IOMUX_PAD(0x5E0, 0x138, 1, 0x0, 0, MX51_PAD_CTRL_5)
#define MX51_PAD_GPIO_NAND__GPIO_3_12 IOMUX_PAD(0x514, 0x12C, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_NANDF_CS0__GPIO_3_16 IOMUX_PAD(0x518, 0x130, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_NANDF_CS1__GPIO_3_17 IOMUX_PAD(0x51C, 0x134, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_NANDF_CS2__GPIO_3_18 IOMUX_PAD(0x520, 0x138, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS2__FEC_TX_ER IOMUX_PAD(0x520, 0x138, 2, 0x0, 0, MX51_PAD_CTRL_5)
#define MX51_PAD_NANDF_CS3__GPIO_3_19 IOMUX_PAD(0x524, 0x13C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS3__FEC_MDC IOMUX_PAD(0x524, 0x13C, 2, 0x0, 0, MX51_PAD_CTRL_5)
#define MX51_PAD_NANDF_CS4__GPIO_3_20 IOMUX_PAD(0x528, 0x140, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS4__FEC_TDAT1 IOMUX_PAD(0x528, 0x140, 2, 0x0, 0, MX51_PAD_CTRL_5)
#define MX51_PAD_NANDF_CS5__GPIO_3_21 IOMUX_PAD(0x52C, 0x144, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS5__FEC_TDAT2 IOMUX_PAD(0x52C, 0x144, 2, 0x0, 0, MX51_PAD_CTRL_5)
#define MX51_PAD_NANDF_CS6__GPIO_3_22 IOMUX_PAD(0x530, 0x148, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS6__FEC_TDAT3 IOMUX_PAD(0x530, 0x148, 2, 0x0, 0, MX51_PAD_CTRL_5)
#define MX51_PAD_NANDF_CS7__GPIO_3_23 IOMUX_PAD(0x534, 0x14C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS7__FEC_TX_EN IOMUX_PAD(0x534, 0x14C, 1, 0x0, 0, MX51_PAD_CTRL_5)
#define MX51_PAD_NANDF_RDY_INT__GPIO_3_24 IOMUX_PAD(0x538, 0x150, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK IOMUX_PAD(0x538, 0x150, 1, 0x0, 0, MX51_PAD_CTRL_4)
#define MX51_PAD_NANDF_D15__GPIO_3_25 IOMUX_PAD(0x53C, 0x154, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D15__ECSPI2_MOSI IOMUX_PAD(0x53C, 0x154, 2, 0x0, 0, MX51_ECSPI_PAD_CTRL)
#define MX51_PAD_NANDF_D14__GPIO_3_26 IOMUX_PAD(0x540, 0x158, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_NANDF_D13__GPIO_3_27 IOMUX_PAD(0x544, 0x15C, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_NANDF_D12__GPIO_3_28 IOMUX_PAD(0x548, 0x160, 3, 0x0, 0, NO_PAD_CTRL)
@@ -185,15 +214,25 @@
#define MX51_PAD_I2C1_CLK__HSI2C_CLK IOMUX_PAD(0x5E8, 0x1F8, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_I2C1_DAT__GPIO_4_17 IOMUX_PAD(0x5EC, 0x1FC, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_I2C1_DAT__HSI2C_DAT IOMUX_PAD(0x5EC, 0x1FC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_TXD__AUD3_BB_TXD IOMUX_PAD(0x5F0, 0x200, IOMUX_CONFIG_SION, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_AUD3_BB_TXD__GPIO_4_18 IOMUX_PAD(0x5F0, 0x200, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_RXD__AUD3_BB_RXD IOMUX_PAD(0x5F4, 0x204, IOMUX_CONFIG_SION, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_AUD3_BB_RXD__GPIO_4_19 IOMUX_PAD(0x5F4, 0x204, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_CK__AUD3_BB_CK IOMUX_PAD(0x5F8, 0x208, IOMUX_CONFIG_SION, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_AUD3_BB_CK__GPIO_4_20 IOMUX_PAD(0x5F8, 0x208, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_FS__AUD3_BB_FS IOMUX_PAD(0x5FC, 0x20C, IOMUX_CONFIG_SION, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_AUD3_BB_FS__GPIO_4_21 IOMUX_PAD(0x5FC, 0x20C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI IOMUX_PAD(0x600, 0x210, 0, 0x0, 0, MX51_ECSPI_PAD_CTRL)
#define MX51_PAD_CSPI1_MOSI__GPIO_4_22 IOMUX_PAD(0x600, 0x210, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSPI1_MISO__ECSPI1_MISO IOMUX_PAD(0x604, 0x214, 0, 0x0, 0, MX51_ECSPI_PAD_CTRL)
#define MX51_PAD_CSPI1_MISO__GPIO_4_23 IOMUX_PAD(0x604, 0x214, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSPI1_SS0__ECSPI1_SS0 IOMUX_PAD(0x608, 0x218, 0, 0x0, 0, MX51_ECSPI_PAD_CTRL)
#define MX51_PAD_CSPI1_SS0__GPIO_4_24 IOMUX_PAD(0x608, 0x218, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSPI1_SS1__ECSPI1_SS1 IOMUX_PAD(0x60C, 0x21C, 0, 0x0, 0, MX51_ECSPI_PAD_CTRL)
#define MX51_PAD_CSPI1_SS1__GPIO_4_25 IOMUX_PAD(0x60C, 0x21C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSPI1_RDY__ECSPI1_RDY IOMUX_PAD(0x610, 0x220, 0, 0x0, 0, MX51_ECSPI_PAD_CTRL)
#define MX51_PAD_CSPI1_RDY__GPIO_4_26 IOMUX_PAD(0x610, 0x220, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK IOMUX_PAD(0x614, 0x224, 0, 0x0, 0, MX51_ECSPI_PAD_CTRL)
#define MX51_PAD_CSPI1_SCLK__GPIO_4_27 IOMUX_PAD(0x614, 0x224, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_UART1_RXD__UART1_RXD IOMUX_PAD(0x618, 0x228, 0, 0x9e4, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST)
#define MX51_PAD_UART1_TXD__UART1_TXD IOMUX_PAD(0x61C, 0x22C, 0, 0x0, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST)
@@ -236,14 +275,14 @@
#define MX51_PAD_USBH1_DATA6__USBH1_DATA6 IOMUX_PAD(0x6A0, 0x2A0, 0, 0x0, 0, MX51_USBH1_PAD_CTRL)
#define MX51_PAD_USBH1_DATA7__USBH1_DATA7 IOMUX_PAD(0x6A4, 0x2A4, 0, 0x0, 0, MX51_USBH1_PAD_CTRL)
#define MX51_PAD_DI1_PIN11__GPIO_3_0 IOMUX_PAD(0x6A8, 0x2A8, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN12__GPIO_3_1 IOMUX_PAD(0x6AC, 0x2AC, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN13__GPIO_3_2 IOMUX_PAD(0x6B0, 0x2B0, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_D0_CS__GPIO_3_3 IOMUX_PAD(0x6B4, 0x2B4, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_D1_CS__GPIO_3_4 IOMUX_PAD(0x6B8, 0x2B8, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_DIN__GPIO_3_5 IOMUX_PAD(0x6BC, 0x2BC, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_DIO__GPIO_3_6 IOMUX_PAD(0x6C0, 0x2C0, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_CLK__GPIO_3_7 IOMUX_PAD(0x6C4, 0x2C4, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_RS__GPIO_3_8 IOMUX_PAD(0x6C8, 0x2C8, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_PIN12__GPIO_3_1 IOMUX_PAD(0x6AC, 0x2AC, 4, 0x978, 1, NO_PAD_CTRL)
+#define MX51_PAD_DI1_PIN13__GPIO_3_2 IOMUX_PAD(0x6B0, 0x2B0, 4, 0x97c, 1, NO_PAD_CTRL)
+#define MX51_PAD_DI1_D0_CS__GPIO_3_3 IOMUX_PAD(0x6B4, 0x2B4, 4, 0x980, 1, NO_PAD_CTRL)
+#define MX51_PAD_DI1_D1_CS__GPIO_3_4 IOMUX_PAD(0x6B8, 0x2B8, 4, 0x984, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_DIN__GPIO_3_5 IOMUX_PAD(0x6BC, 0x2BC, 4, 0x988, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_DIO__GPIO_3_6 IOMUX_PAD(0x6C0, 0x2C0, 4, 0x98c, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_CLK__GPIO_3_7 IOMUX_PAD(0x6C4, 0x2C4, 4, 0x990, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_RS__GPIO_3_8 IOMUX_PAD(0x6C8, 0x2C8, 4, 0x994, 1, NO_PAD_CTRL)
#define MX51_PAD_DISP1_DAT0__DISP1_DAT0 IOMUX_PAD(0x6CC, 0x2CC, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP1_DAT1__DISP1_DAT1 IOMUX_PAD(0x6D0, 0x2D0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP1_DAT2__DISP1_DAT2 IOMUX_PAD(0x6D4, 0x2D4, 0, 0x0, 0, NO_PAD_CTRL)
@@ -295,11 +334,17 @@
#define MX51_PAD_DISP2_DAT14__DISP2_DAT14 IOMUX_PAD(0x794, 0x38C, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP2_DAT15__DISP2_DAT15 IOMUX_PAD(0x798, 0x390, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x79C, 0x394, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_CMD__AUD5_RXFS IOMUX_PAD(0x79C, 0x394, 1, 0x8e0, 1, NO_PAD_CTRL)
#define MX51_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x7A0, 0x398, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_CLK__AUD5_RXC IOMUX_PAD(0x7A0, 0x398, 1, 0x8dc, 1, NO_PAD_CTRL)
#define MX51_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x7A4, 0x39C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA0__AUD5_TXD IOMUX_PAD(0x7A4, 0x39C, 1, 0x8d8, 2, NO_PAD_CTRL)
#define MX51_PAD_SD1_DATA1__SD1_DATA1 IOMUX_PAD(0x7A8, 0x3A0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA1__AUD5_RXD IOMUX_PAD(0x7A8, 0x3A0, 1, 0x8d4, 2, NO_PAD_CTRL)
#define MX51_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x7AC, 0x3A4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA2__AUD5_TXC IOMUX_PAD(0x7AC, 0x3A4, 1, 0x8e4, 2, NO_PAD_CTRL)
#define MX51_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x7B0, 0x3A8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA3__AUD5_TXFS IOMUX_PAD(0x7B0, 0x3A8, 1, 0x8e8, 2, NO_PAD_CTRL)
#define MX51_PAD_GPIO_1_0__GPIO_1_0 IOMUX_PAD(0x7B4, 0x3AC, 1, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_1_1__GPIO_1_1 IOMUX_PAD(0x7B8, 0x3B0, 1, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_SD2_CMD__SD2_CMD IOMUX_PAD(0x7BC, 0x3B4, 0, 0x0, 0, NO_PAD_CTRL)
diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h
index ed98b9c..8bc5972 100644
--- a/arch/arm/plat-mxc/include/mach/mx21.h
+++ b/arch/arm/plat-mxc/include/mach/mx21.h
@@ -120,7 +120,7 @@
#define MX21_INT_GPT1 26
#define MX21_INT_WDOG 27
#define MX21_INT_PCMCIA 28
-#define MX21_INT_NANDFC 29
+#define MX21_INT_NFC 29
#define MX21_INT_BMI 30
#define MX21_INT_CSI 31
#define MX21_INT_DMACH0 32
diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h
index 4a6f800..153dd1b 100644
--- a/arch/arm/plat-mxc/include/mach/mx25.h
+++ b/arch/arm/plat-mxc/include/mach/mx25.h
@@ -50,6 +50,8 @@
#define MX25_SSI1_BASE_ADDR 0x50034000
#define MX25_NFC_BASE_ADDR 0xbb000000
#define MX25_DRYICE_BASE_ADDR 0x53ffc000
+#define MX25_ESDHC1_BASE_ADDR 0x53fb4000
+#define MX25_ESDHC2_BASE_ADDR 0x53fb8000
#define MX25_LCDC_BASE_ADDR 0x53fbc000
#define MX25_KPP_BASE_ADDR 0x43fa8000
#define MX25_OTG_BASE_ADDR 0x53ff4000
@@ -59,6 +61,8 @@
#define MX25_INT_I2C1 3
#define MX25_INT_I2C2 4
#define MX25_INT_UART4 5
+#define MX25_INT_MMC_SDHC2 8
+#define MX25_INT_MMC_SDHC1 9
#define MX25_INT_I2C3 10
#define MX25_INT_SSI2 11
#define MX25_INT_SSI1 12
@@ -69,7 +73,7 @@
#define MX25_INT_KPP 24
#define MX25_INT_DRYICE 25
#define MX25_INT_UART2 32
-#define MX25_INT_NANDFC 33
+#define MX25_INT_NFC 33
#define MX25_INT_LCDC 39
#define MX25_INT_UART5 40
#define MX25_INT_CAN1 43
@@ -77,4 +81,13 @@
#define MX25_INT_UART1 45
#define MX25_INT_FEC 57
+#define MX25_DMA_REQ_SSI2_RX1 22
+#define MX25_DMA_REQ_SSI2_TX1 23
+#define MX25_DMA_REQ_SSI2_RX0 24
+#define MX25_DMA_REQ_SSI2_TX0 25
+#define MX25_DMA_REQ_SSI1_RX1 26
+#define MX25_DMA_REQ_SSI1_TX1 27
+#define MX25_DMA_REQ_SSI1_RX0 28
+#define MX25_DMA_REQ_SSI1_TX0 29
+
#endif /* ifndef __MACH_MX25_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index a8ab2e0..2237ba2 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -167,7 +167,7 @@
#define MX27_INT_GPT1 26
#define MX27_INT_WDOG 27
#define MX27_INT_PCMCIA 28
-#define MX27_INT_NANDFC 29
+#define MX27_INT_NFC 29
#define MX27_INT_ATA 30
#define MX27_INT_CSI 31
#define MX27_INT_DMACH0 32
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index afee3ab..03e2afa 100644
--- a/arch/arm/plat-mxc/include/mach/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -168,7 +168,7 @@
#define MX31_INT_POWER_FAIL 30
#define MX31_INT_CCM_DVFS 31
#define MX31_INT_UART2 32
-#define MX31_INT_NANDFC 33
+#define MX31_INT_NFC 33
#define MX31_INT_SDMA 34
#define MX31_INT_USB1 35
#define MX31_INT_USB2 36
@@ -197,6 +197,15 @@
#define MX31_INT_EXT_WDOG 62
#define MX31_INT_EXT_TV 63
+#define MX31_DMA_REQ_SSI2_RX1 22
+#define MX31_DMA_REQ_SSI2_TX1 23
+#define MX31_DMA_REQ_SSI2_RX0 24
+#define MX31_DMA_REQ_SSI2_TX0 25
+#define MX31_DMA_REQ_SSI1_RX1 26
+#define MX31_DMA_REQ_SSI1_TX1 27
+#define MX31_DMA_REQ_SSI1_RX0 28
+#define MX31_DMA_REQ_SSI1_TX0 29
+
#define MX31_PROD_SIGNATURE 0x1 /* For MX31 */
/* silicon revisions specific to i.MX31 */
diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h
index af3038c..cb071b7 100644
--- a/arch/arm/plat-mxc/include/mach/mx35.h
+++ b/arch/arm/plat-mxc/include/mach/mx35.h
@@ -1,5 +1,6 @@
#ifndef __MACH_MX35_H__
#define __MACH_MX35_H__
+
/*
* IRAM
*/
@@ -52,6 +53,9 @@
#define MX35_GPIO3_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xa4000)
#define MX35_SCC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xac000)
#define MX35_RNGA_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xb0000)
+#define MX35_ESDHC1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xb4000)
+#define MX35_ESDHC2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xb8000)
+#define MX35_ESDHC3_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xbc000)
#define MX35_IPU_CTRL_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xc0000)
#define MX35_AUDMUX_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xc4000)
#define MX35_GPIO1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xcc000)
@@ -63,6 +67,8 @@
#define MX35_CAN1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xe4000)
#define MX35_CAN2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xe8000)
#define MX35_RTIC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xec000)
+#define MX35_IIM_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xf0000)
+
#define MX35_OTG_BASE_ADDR 0x53ff4000
#define MX35_ROMP_BASE_ADDR 0x60000000
@@ -145,7 +151,7 @@
#define MX35_INT_GPT 29
#define MX35_INT_POWER_FAIL 30
#define MX35_INT_UART2 32
-#define MX35_INT_NANDFC 33
+#define MX35_INT_NFC 33
#define MX35_INT_SDMA 34
#define MX35_INT_USBHS 35
#define MX35_INT_USBOTG 37
@@ -173,22 +179,18 @@
#define MX35_INT_EXT_WDOG 62
#define MX35_INT_EXT_TV 63
+#define MX35_DMA_REQ_SSI2_RX1 22
+#define MX35_DMA_REQ_SSI2_TX1 23
+#define MX35_DMA_REQ_SSI2_RX0 24
+#define MX35_DMA_REQ_SSI2_TX0 25
+#define MX35_DMA_REQ_SSI1_RX1 26
+#define MX35_DMA_REQ_SSI1_TX1 27
+#define MX35_DMA_REQ_SSI1_RX0 28
+#define MX35_DMA_REQ_SSI1_TX0 29
+
#define MX35_PROD_SIGNATURE 0x1 /* For MX31 */
-/* silicon revisions specific to i.MX31 */
-#define MX35_CHIP_REV_1_0 0x10
-#define MX35_CHIP_REV_1_1 0x11
-#define MX35_CHIP_REV_1_2 0x12
-#define MX35_CHIP_REV_1_3 0x13
-#define MX35_CHIP_REV_2_0 0x20
-#define MX35_CHIP_REV_2_1 0x21
-#define MX35_CHIP_REV_2_2 0x22
-#define MX35_CHIP_REV_2_3 0x23
-#define MX35_CHIP_REV_3_0 0x30
-#define MX35_CHIP_REV_3_1 0x31
-#define MX35_CHIP_REV_3_2 0x32
-
-#define MX35_SYSTEM_REV_MIN MX35_CHIP_REV_1_0
+#define MX35_SYSTEM_REV_MIN MX3x_CHIP_REV_1_0
#define MX35_SYSTEM_REV_NUM 3
#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
index 7a356de3..d1bd26d 100644
--- a/arch/arm/plat-mxc/include/mach/mx3x.h
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -240,7 +240,7 @@
#define MX3x_PROD_SIGNATURE 0x1 /* For MX31 */
-/* silicon revisions specific to i.MX31 */
+/* silicon revisions specific to i.MX31 and i.MX35 */
#define MX3x_CHIP_REV_1_0 0x10
#define MX3x_CHIP_REV_1_1 0x11
#define MX3x_CHIP_REV_1_2 0x12
@@ -267,6 +267,14 @@
{
return mx31_cpu_rev;
}
+
+extern unsigned int mx35_cpu_rev;
+extern void mx35_read_cpu_rev(void);
+
+static inline int mx35_revision(void)
+{
+ return mx35_cpu_rev;
+}
#endif
#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
@@ -389,19 +397,6 @@
#define MXC_INT_EXT_WDOG MX3x_INT_EXT_WDOG
#define MXC_INT_EXT_TV MX3x_INT_EXT_TV
#define PROD_SIGNATURE MX3x_PROD_SIGNATURE
-#define CHIP_REV_1_0 MX3x_CHIP_REV_1_0
-#define CHIP_REV_1_1 MX3x_CHIP_REV_1_1
-#define CHIP_REV_1_2 MX3x_CHIP_REV_1_2
-#define CHIP_REV_1_3 MX3x_CHIP_REV_1_3
-#define CHIP_REV_2_0 MX3x_CHIP_REV_2_0
-#define CHIP_REV_2_1 MX3x_CHIP_REV_2_1
-#define CHIP_REV_2_2 MX3x_CHIP_REV_2_2
-#define CHIP_REV_2_3 MX3x_CHIP_REV_2_3
-#define CHIP_REV_3_0 MX3x_CHIP_REV_3_0
-#define CHIP_REV_3_1 MX3x_CHIP_REV_3_1
-#define CHIP_REV_3_2 MX3x_CHIP_REV_3_2
-#define SYSTEM_REV_MIN MX3x_SYSTEM_REV_MIN
-#define SYSTEM_REV_NUM MX3x_SYSTEM_REV_NUM
#endif
#endif /* ifndef __MACH_MX3x_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/plat-mxc/include/mach/mx51.h
index 5aad344..c54b5c3 100644
--- a/arch/arm/plat-mxc/include/mach/mx51.h
+++ b/arch/arm/plat-mxc/include/mach/mx51.h
@@ -1,5 +1,5 @@
-#ifndef __ASM_ARCH_MXC_MX51_H__
-#define __ASM_ARCH_MXC_MX51_H__
+#ifndef __MACH_MX51_H__
+#define __MACH_MX51_H__
/*
* MX51 memory map:
@@ -7,24 +7,23 @@
*
* Virt Phys Size What
* ---------------------------------------------------------------------------
- * FA3E0000 1FFE0000 128K IRAM (SCCv2 RAM)
+ * fa3e0000 1ffe0000 128K IRAM (SCCv2 RAM)
* 30000000 256M GPU
* 40000000 512M IPU
- * FA200000 60000000 1M DEBUG
- * FB100000 70000000 1M SPBA 0
- * FB000000 73F00000 1M AIPS 1
- * FB200000 83F00000 1M AIPS 2
- * 8FFFC000 16K TZIC (interrupt controller)
+ * fa200000 60000000 1M DEBUG
+ * fb100000 70000000 1M SPBA 0
+ * fb000000 73f00000 1M AIPS 1
+ * fb200000 83f00000 1M AIPS 2
+ * 8fffc000 16K TZIC (interrupt controller)
* 90000000 256M CSD0 SDRAM/DDR
- * A0000000 256M CSD1 SDRAM/DDR
- * B0000000 128M CS0 Flash
- * B8000000 128M CS1 Flash
- * C0000000 128M CS2 Flash
- * C8000000 64M CS3 Flash
- * CC000000 32M CS4 SRAM
- * CE000000 32M CS5 SRAM
- * CFFF0000 64K NFC (NAND Flash AXI)
- *
+ * a0000000 256M CSD1 SDRAM/DDR
+ * b0000000 128M CS0 Flash
+ * b8000000 128M CS1 Flash
+ * c0000000 128M CS2 Flash
+ * c8000000 64M CS3 Flash
+ * cc000000 32M CS4 SRAM
+ * ce000000 32M CS5 SRAM
+ * cfff0000 64K NFC (NAND Flash AXI)
*/
/*
@@ -36,65 +35,151 @@
/*
* IRAM
*/
-#define MX51_IRAM_BASE_ADDR 0x1FFE0000 /* internal ram */
-#define MX51_IRAM_BASE_ADDR_VIRT 0xFA3E0000
+#define MX51_IRAM_BASE_ADDR 0x1ffe0000 /* internal ram */
+#define MX51_IRAM_BASE_ADDR_VIRT 0xfa3e0000
#define MX51_IRAM_PARTITIONS 16
-#define MX51_IRAM_PARTITIONS_TO1 12
#define MX51_IRAM_SIZE (MX51_IRAM_PARTITIONS * SZ_8K) /* 128KB */
-/*
- * NFC
- */
-#define MX51_NFC_AXI_BASE_ADDR 0xCFFF0000 /* NAND flash AXI */
-#define MX51_NFC_AXI_SIZE SZ_64K
-
-/*
- * Graphics Memory of GPU
- */
#define MX51_GPU_BASE_ADDR 0x20000000
-#define MX51_GPU2D_BASE_ADDR 0xD0000000
-
-#define MX51_TZIC_BASE_ADDR_TO1 0x8FFFC000
-#define MX51_TZIC_BASE_ADDR 0xE0000000
+#define MX51_GPU_CTRL_BASE_ADDR 0x30000000
+#define MX51_IPU_CTRL_BASE_ADDR 0x40000000
#define MX51_DEBUG_BASE_ADDR 0x60000000
-#define MX51_DEBUG_BASE_ADDR_VIRT 0xFA200000
+#define MX51_DEBUG_BASE_ADDR_VIRT 0xfa200000
#define MX51_DEBUG_SIZE SZ_1M
-#define MX51_ETB_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00001000)
-#define MX51_ETM_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00002000)
-#define MX51_TPIU_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00003000)
-#define MX51_CTI0_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00004000)
-#define MX51_CTI1_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00005000)
-#define MX51_CTI2_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00006000)
-#define MX51_CTI3_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00007000)
-#define MX51_CORTEX_DBG_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00008000)
+
+#define MX51_ETB_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x01000)
+#define MX51_ETM_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x02000)
+#define MX51_TPIU_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x03000)
+#define MX51_CTI0_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x04000)
+#define MX51_CTI1_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x05000)
+#define MX51_CTI2_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x06000)
+#define MX51_CTI3_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x07000)
+#define MX51_CORTEX_DBG_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x08000)
/*
* SPBA global module enabled #0
*/
-#define MX51_SPBA0_BASE_ADDR 0x70000000
-#define MX51_SPBA0_BASE_ADDR_VIRT 0xFB100000
+#define MX51_SPBA0_BASE_ADDR 0x70000000
+#define MX51_SPBA0_BASE_ADDR_VIRT 0xfb100000
#define MX51_SPBA0_SIZE SZ_1M
-#define MX51_MMC_SDHC1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00004000)
-#define MX51_MMC_SDHC2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00008000)
-#define MX51_UART3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x0000C000)
-#define MX51_CSPI1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00010000)
-#define MX51_SSI2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00014000)
-#define MX51_MMC_SDHC3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00020000)
-#define MX51_MMC_SDHC4_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00024000)
-#define MX51_SPDIF_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00028000)
-#define MX51_ATA_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00030000)
-#define MX51_SLIM_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00034000)
-#define MX51_HSI2C_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00038000)
-#define MX51_SPBA_CTRL_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x0003C000)
+#define MX51_MMC_SDHC1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x04000)
+#define MX51_MMC_SDHC2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x08000)
+#define MX51_UART3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x0c000)
+#define MX51_ECSPI1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x10000)
+#define MX51_SSI2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x14000)
+#define MX51_MMC_SDHC3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x20000)
+#define MX51_MMC_SDHC4_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x24000)
+#define MX51_SPDIF_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x28000)
+#define MX51_ATA_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x30000)
+#define MX51_SLIM_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x34000)
+#define MX51_HSI2C_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x38000)
+#define MX51_SPBA_CTRL_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x3c000)
+
+/*
+ * AIPS 1
+ */
+#define MX51_AIPS1_BASE_ADDR 0x73f00000
+#define MX51_AIPS1_BASE_ADDR_VIRT 0xfb000000
+#define MX51_AIPS1_SIZE SZ_1M
+
+#define MX51_OTG_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x80000)
+#define MX51_GPIO1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x84000)
+#define MX51_GPIO2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x88000)
+#define MX51_GPIO3_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x8c000)
+#define MX51_GPIO4_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x90000)
+#define MX51_KPP_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x94000)
+#define MX51_WDOG_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x98000)
+#define MX51_WDOG2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x9c000)
+#define MX51_GPT1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xa0000)
+#define MX51_SRTC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xa4000)
+#define MX51_IOMUXC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xa8000)
+#define MX51_EPIT1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xac000)
+#define MX51_EPIT2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xb0000)
+#define MX51_PWM1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xb4000)
+#define MX51_PWM2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xb8000)
+#define MX51_UART1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xbc000)
+#define MX51_UART2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xc0000)
+#define MX51_SRC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xd0000)
+#define MX51_CCM_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xd4000)
+#define MX51_GPC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xd8000)
+
+/*
+ * AIPS 2
+ */
+#define MX51_AIPS2_BASE_ADDR 0x83f00000
+#define MX51_AIPS2_BASE_ADDR_VIRT 0xfb200000
+#define MX51_AIPS2_SIZE SZ_1M
+
+#define MX51_PLL1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x80000)
+#define MX51_PLL2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x84000)
+#define MX51_PLL3_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x88000)
+#define MX51_AHBMAX_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x94000)
+#define MX51_IIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x98000)
+#define MX51_CSU_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x9c000)
+#define MX51_ARM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xa0000)
+#define MX51_OWIRE_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xa4000)
+#define MX51_FIRI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xa8000)
+#define MX51_ECSPI2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xac000)
+#define MX51_SDMA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xb0000)
+#define MX51_SCC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xb4000)
+#define MX51_ROMCP_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xb8000)
+#define MX51_RTIC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xbc000)
+#define MX51_CSPI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xc0000)
+#define MX51_I2C2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xc4000)
+#define MX51_I2C1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xc8000)
+#define MX51_SSI1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xcc000)
+#define MX51_AUDMUX_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xd0000)
+#define MX51_M4IF_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xd8000)
+#define MX51_ESDCTL_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xd9000)
+#define MX51_WEIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xda000)
+#define MX51_NFC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xdb000)
+#define MX51_EMI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xdbf00)
+#define MX51_MIPI_HSC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xdc000)
+#define MX51_ATA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xe0000)
+#define MX51_SIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xe4000)
+#define MX51_SSI3BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xe8000)
+#define MX51_FEC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xec000)
+#define MX51_TVE_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xf0000)
+#define MX51_VPU_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xf4000)
+#define MX51_SAHARA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xf8000)
+
+#define MX51_CSD0_BASE_ADDR 0x90000000
+#define MX51_CSD1_BASE_ADDR 0xa0000000
+#define MX51_CS0_BASE_ADDR 0xb0000000
+#define MX51_CS1_BASE_ADDR 0xb8000000
+#define MX51_CS2_BASE_ADDR 0xc0000000
+#define MX51_CS3_BASE_ADDR 0xc8000000
+#define MX51_CS4_BASE_ADDR 0xcc000000
+#define MX51_CS5_BASE_ADDR 0xce000000
+
+/*
+ * NFC
+ */
+#define MX51_NFC_AXI_BASE_ADDR 0xcfff0000 /* NAND flash AXI */
+#define MX51_NFC_AXI_SIZE SZ_64K
+
+#define MX51_GPU2D_BASE_ADDR 0xd0000000
+#define MX51_TZIC_BASE_ADDR 0xe0000000
+
+#define MX51_IO_ADDRESS(x) ( \
+ IMX_IO_ADDRESS(x, MX51_IRAM) ?: \
+ IMX_IO_ADDRESS(x, MX51_DEBUG) ?: \
+ IMX_IO_ADDRESS(x, MX51_SPBA0) ?: \
+ IMX_IO_ADDRESS(x, MX51_AIPS1) ?: \
+ IMX_IO_ADDRESS(x, MX51_AIPS2))
+
+/* This is currently used in <mach/debug-macro.S>, but should go away */
+#define MX51_AIPS1_IO_ADDRESS(x) \
+ (((x) - MX51_AIPS1_BASE_ADDR) + MX51_AIPS1_BASE_ADDR_VIRT)
/*
* defines for SPBA modules
*/
#define MX51_SPBA_SDHC1 0x04
#define MX51_SPBA_SDHC2 0x08
-#define MX51_SPBA_UART3 0x0C
+#define MX51_SPBA_UART3 0x0c
#define MX51_SPBA_CSPI1 0x10
#define MX51_SPBA_SSI2 0x14
#define MX51_SPBA_SDHC3 0x20
@@ -103,35 +188,7 @@
#define MX51_SPBA_ATA 0x30
#define MX51_SPBA_SLIM 0x34
#define MX51_SPBA_HSI2C 0x38
-#define MX51_SPBA_CTRL 0x3C
-
-/*
- * AIPS 1
- */
-#define MX51_AIPS1_BASE_ADDR 0x73F00000
-#define MX51_AIPS1_BASE_ADDR_VIRT 0xFB000000
-#define MX51_AIPS1_SIZE SZ_1M
-
-#define MX51_OTG_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00080000)
-#define MX51_GPIO1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00084000)
-#define MX51_GPIO2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00088000)
-#define MX51_GPIO3_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x0008C000)
-#define MX51_GPIO4_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00090000)
-#define MX51_KPP_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00094000)
-#define MX51_WDOG_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00098000)
-#define MX51_WDOG2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x0009C000)
-#define MX51_GPT1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000A0000)
-#define MX51_SRTC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000A4000)
-#define MX51_IOMUXC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000A8000)
-#define MX51_EPIT1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000AC000)
-#define MX51_EPIT2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000B0000)
-#define MX51_PWM1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000B4000)
-#define MX51_PWM2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000B8000)
-#define MX51_UART1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000BC000)
-#define MX51_UART2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000C0000)
-#define MX51_SRC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000D0000)
-#define MX51_CCM_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000D4000)
-#define MX51_GPC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000D8000)
+#define MX51_SPBA_CTRL 0x3c
/*
* Defines for modules using static and dynamic DMA channels
@@ -164,282 +221,186 @@
#define MX51_MXC_DMA_CHANNEL_ATA_TX MXC_DMA_DYNAMIC_CHANNEL
#define MX51_MXC_DMA_CHANNEL_MEMORY MXC_DMA_DYNAMIC_CHANNEL
-/*
- * AIPS 2
- */
-#define MX51_AIPS2_BASE_ADDR 0x83F00000
-#define MX51_AIPS2_BASE_ADDR_VIRT 0xFB200000
-#define MX51_AIPS2_SIZE SZ_1M
-
-#define MX51_PLL1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00080000)
-#define MX51_PLL2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00084000)
-#define MX51_PLL3_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00088000)
-#define MX51_AHBMAX_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00094000)
-#define MX51_IIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00098000)
-#define MX51_CSU_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x0009C000)
-#define MX51_ARM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000A0000)
-#define MX51_OWIRE_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000A4000)
-#define MX51_FIRI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000A8000)
-#define MX51_CSPI2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000AC000)
-#define MX51_SDMA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000B0000)
-#define MX51_SCC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000B4000)
-#define MX51_ROMCP_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000B8000)
-#define MX51_RTIC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000BC000)
-#define MX51_CSPI3_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000C0000)
-#define MX51_I2C2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000C4000)
-#define MX51_I2C1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000C8000)
-#define MX51_SSI1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000CC000)
-#define MX51_AUDMUX_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000D0000)
-#define MX51_M4IF_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000D8000)
-#define MX51_ESDCTL_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000D9000)
-#define MX51_WEIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000DA000)
-#define MX51_NFC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000DB000)
-#define MX51_EMI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000DBF00)
-#define MX51_MIPI_HSC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000DC000)
-#define MX51_ATA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000E0000)
-#define MX51_SIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000E4000)
-#define MX51_SSI3BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000E8000)
-#define MX51_MXC_FEC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000EC000)
-#define MX51_TVE_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000F0000)
-#define MX51_VPU_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000F4000)
-#define MX51_SAHARA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000F8000)
-
-/*
- * Memory regions and CS
- */
-#define MX51_GPU_CTRL_BASE_ADDR 0x30000000
-#define MX51_IPU_CTRL_BASE_ADDR 0x40000000
-#define MX51_CSD0_BASE_ADDR 0x90000000
-#define MX51_CSD1_BASE_ADDR 0xA0000000
-#define MX51_CS0_BASE_ADDR 0xB0000000
-#define MX51_CS1_BASE_ADDR 0xB8000000
-#define MX51_CS2_BASE_ADDR 0xC0000000
-#define MX51_CS3_BASE_ADDR 0xC8000000
-#define MX51_CS4_BASE_ADDR 0xCC000000
-#define MX51_CS5_BASE_ADDR 0xCE000000
-
-/* Does given address belongs to the specified memory region? */
-#define ADDRESS_IN_REGION(addr, start, size) \
- (((addr) >= (start)) && ((addr) < (start)+(size)))
-
-/* Does given address belongs to the specified named `module'? */
-#define MX51_IS_MODULE(addr, module) \
- ADDRESS_IN_REGION(addr, MX51_ ## module ## _BASE_ADDR, \
- MX51_ ## module ## _SIZE)
-/*
- * This macro defines the physical to virtual address mapping for all the
- * peripheral modules. It is used by passing in the physical address as x
- * and returning the virtual address. If the physical address is not mapped,
- * it returns 0xDEADBEEF
- */
-
-#define MX51_IO_ADDRESS(x) \
- (void __iomem *) \
- (MX51_IS_MODULE(x, IRAM) ? MX51_IRAM_IO_ADDRESS(x) : \
- MX51_IS_MODULE(x, DEBUG) ? MX51_DEBUG_IO_ADDRESS(x) : \
- MX51_IS_MODULE(x, SPBA0) ? MX51_SPBA0_IO_ADDRESS(x) : \
- MX51_IS_MODULE(x, AIPS1) ? MX51_AIPS1_IO_ADDRESS(x) : \
- MX51_IS_MODULE(x, AIPS2) ? MX51_AIPS2_IO_ADDRESS(x) : \
- 0xDEADBEEF)
-
-/*
- * define the address mapping macros: in physical address order
- */
-#define MX51_IRAM_IO_ADDRESS(x) \
- (((x) - MX51_IRAM_BASE_ADDR) + MX51_IRAM_BASE_ADDR_VIRT)
-
-#define MX51_DEBUG_IO_ADDRESS(x) \
- (((x) - MX51_DEBUG_BASE_ADDR) + MX51_DEBUG_BASE_ADDR_VIRT)
-
-#define MX51_SPBA0_IO_ADDRESS(x) \
- (((x) - MX51_SPBA0_BASE_ADDR) + MX51_SPBA0_BASE_ADDR_VIRT)
-
-#define MX51_AIPS1_IO_ADDRESS(x) \
- (((x) - MX51_AIPS1_BASE_ADDR) + MX51_AIPS1_BASE_ADDR_VIRT)
-
-#define MX51_AIPS2_IO_ADDRESS(x) \
- (((x) - MX51_AIPS2_BASE_ADDR) + MX51_AIPS2_BASE_ADDR_VIRT)
-
#define MX51_IS_MEM_DEVICE_NONSHARED(x) 0
/*
* DMA request assignments
*/
-#define MX51_DMA_REQ_SSI3_TX1 47
-#define MX51_DMA_REQ_SSI3_RX1 46
-#define MX51_DMA_REQ_SPDIF 45
-#define MX51_DMA_REQ_UART3_TX 44
-#define MX51_DMA_REQ_UART3_RX 43
-#define MX51_DMA_REQ_SLIM_B_TX 42
-#define MX51_DMA_REQ_SDHC4 41
-#define MX51_DMA_REQ_SDHC3 40
-#define MX51_DMA_REQ_CSPI_TX 39
-#define MX51_DMA_REQ_CSPI_RX 38
-#define MX51_DMA_REQ_SSI3_TX2 37
-#define MX51_DMA_REQ_IPU 36
-#define MX51_DMA_REQ_SSI3_RX2 35
-#define MX51_DMA_REQ_EPIT2 34
-#define MX51_DMA_REQ_CTI2_1 33
-#define MX51_DMA_REQ_EMI_WR 32
-#define MX51_DMA_REQ_CTI2_0 31
-#define MX51_DMA_REQ_EMI_RD 30
-#define MX51_DMA_REQ_SSI1_TX1 29
-#define MX51_DMA_REQ_SSI1_RX1 28
-#define MX51_DMA_REQ_SSI1_TX2 27
-#define MX51_DMA_REQ_SSI1_RX2 26
-#define MX51_DMA_REQ_SSI2_TX1 25
-#define MX51_DMA_REQ_SSI2_RX1 24
-#define MX51_DMA_REQ_SSI2_TX2 23
-#define MX51_DMA_REQ_SSI2_RX2 22
-#define MX51_DMA_REQ_SDHC2 21
-#define MX51_DMA_REQ_SDHC1 20
-#define MX51_DMA_REQ_UART1_TX 19
-#define MX51_DMA_REQ_UART1_RX 18
-#define MX51_DMA_REQ_UART2_TX 17
-#define MX51_DMA_REQ_UART2_RX 16
-#define MX51_DMA_REQ_GPU 15
-#define MX51_DMA_REQ_EXTREQ1 14
-#define MX51_DMA_REQ_FIRI_TX 13
-#define MX51_DMA_REQ_FIRI_RX 12
-#define MX51_DMA_REQ_HS_I2C_RX 11
-#define MX51_DMA_REQ_HS_I2C_TX 10
-#define MX51_DMA_REQ_CSPI2_TX 9
-#define MX51_DMA_REQ_CSPI2_RX 8
-#define MX51_DMA_REQ_CSPI1_TX 7
-#define MX51_DMA_REQ_CSPI1_RX 6
-#define MX51_DMA_REQ_SLIM_B 5
-#define MX51_DMA_REQ_ATA_TX_END 4
-#define MX51_DMA_REQ_ATA_TX 3
-#define MX51_DMA_REQ_ATA_RX 2
-#define MX51_DMA_REQ_GPC 1
-#define MX51_DMA_REQ_VPU 0
+#define MX51_DMA_REQ_VPU 0
+#define MX51_DMA_REQ_GPC 1
+#define MX51_DMA_REQ_ATA_RX 2
+#define MX51_DMA_REQ_ATA_TX 3
+#define MX51_DMA_REQ_ATA_TX_END 4
+#define MX51_DMA_REQ_SLIM_B 5
+#define MX51_DMA_REQ_CSPI1_RX 6
+#define MX51_DMA_REQ_CSPI1_TX 7
+#define MX51_DMA_REQ_CSPI2_RX 8
+#define MX51_DMA_REQ_CSPI2_TX 9
+#define MX51_DMA_REQ_HS_I2C_TX 10
+#define MX51_DMA_REQ_HS_I2C_RX 11
+#define MX51_DMA_REQ_FIRI_RX 12
+#define MX51_DMA_REQ_FIRI_TX 13
+#define MX51_DMA_REQ_EXTREQ1 14
+#define MX51_DMA_REQ_GPU 15
+#define MX51_DMA_REQ_UART2_RX 16
+#define MX51_DMA_REQ_UART2_TX 17
+#define MX51_DMA_REQ_UART1_RX 18
+#define MX51_DMA_REQ_UART1_TX 19
+#define MX51_DMA_REQ_SDHC1 20
+#define MX51_DMA_REQ_SDHC2 21
+#define MX51_DMA_REQ_SSI2_RX1 22
+#define MX51_DMA_REQ_SSI2_TX1 23
+#define MX51_DMA_REQ_SSI2_RX0 24
+#define MX51_DMA_REQ_SSI2_TX0 25
+#define MX51_DMA_REQ_SSI1_RX1 26
+#define MX51_DMA_REQ_SSI1_TX1 27
+#define MX51_DMA_REQ_SSI1_RX0 28
+#define MX51_DMA_REQ_SSI1_TX0 29
+#define MX51_DMA_REQ_EMI_RD 30
+#define MX51_DMA_REQ_CTI2_0 31
+#define MX51_DMA_REQ_EMI_WR 32
+#define MX51_DMA_REQ_CTI2_1 33
+#define MX51_DMA_REQ_EPIT2 34
+#define MX51_DMA_REQ_SSI3_RX2 35
+#define MX51_DMA_REQ_IPU 36
+#define MX51_DMA_REQ_SSI3_TX2 37
+#define MX51_DMA_REQ_CSPI_RX 38
+#define MX51_DMA_REQ_CSPI_TX 39
+#define MX51_DMA_REQ_SDHC3 40
+#define MX51_DMA_REQ_SDHC4 41
+#define MX51_DMA_REQ_SLIM_B_TX 42
+#define MX51_DMA_REQ_UART3_RX 43
+#define MX51_DMA_REQ_UART3_TX 44
+#define MX51_DMA_REQ_SPDIF 45
+#define MX51_DMA_REQ_SSI3_RX1 46
+#define MX51_DMA_REQ_SSI3_TX1 47
/*
* Interrupt numbers
*/
-#define MX51_MXC_INT_BASE 0
-#define MX51_MXC_INT_RESV0 0
-#define MX51_MXC_INT_MMC_SDHC1 1
-#define MX51_MXC_INT_MMC_SDHC2 2
-#define MX51_MXC_INT_MMC_SDHC3 3
-#define MX51_MXC_INT_MMC_SDHC4 4
-#define MX51_MXC_INT_RESV5 5
-#define MX51_MXC_INT_SDMA 6
-#define MX51_MXC_INT_IOMUX 7
-#define MX51_MXC_INT_NFC 8
-#define MX51_MXC_INT_VPU 9
-#define MX51_MXC_INT_IPU_ERR 10
-#define MX51_MXC_INT_IPU_SYN 11
-#define MX51_MXC_INT_GPU 12
-#define MX51_MXC_INT_RESV13 13
-#define MX51_MXC_INT_USB_H1 14
-#define MX51_MXC_INT_EMI 15
-#define MX51_MXC_INT_USB_H2 16
-#define MX51_MXC_INT_USB_H3 17
-#define MX51_MXC_INT_USB_OTG 18
-#define MX51_MXC_INT_SAHARA_H0 19
-#define MX51_MXC_INT_SAHARA_H1 20
-#define MX51_MXC_INT_SCC_SMN 21
-#define MX51_MXC_INT_SCC_STZ 22
-#define MX51_MXC_INT_SCC_SCM 23
-#define MX51_MXC_INT_SRTC_NTZ 24
-#define MX51_MXC_INT_SRTC_TZ 25
-#define MX51_MXC_INT_RTIC 26
-#define MX51_MXC_INT_CSU 27
-#define MX51_MXC_INT_SLIM_B 28
-#define MX51_MXC_INT_SSI1 29
-#define MX51_MXC_INT_SSI2 30
-#define MX51_MXC_INT_UART1 31
-#define MX51_MXC_INT_UART2 32
-#define MX51_MXC_INT_UART3 33
-#define MX51_MXC_INT_RESV34 34
-#define MX51_MXC_INT_RESV35 35
-#define MX51_MXC_INT_CSPI1 36
-#define MX51_MXC_INT_CSPI2 37
-#define MX51_MXC_INT_CSPI 38
-#define MX51_MXC_INT_GPT 39
-#define MX51_MXC_INT_EPIT1 40
-#define MX51_MXC_INT_EPIT2 41
-#define MX51_MXC_INT_GPIO1_INT7 42
-#define MX51_MXC_INT_GPIO1_INT6 43
-#define MX51_MXC_INT_GPIO1_INT5 44
-#define MX51_MXC_INT_GPIO1_INT4 45
-#define MX51_MXC_INT_GPIO1_INT3 46
-#define MX51_MXC_INT_GPIO1_INT2 47
-#define MX51_MXC_INT_GPIO1_INT1 48
-#define MX51_MXC_INT_GPIO1_INT0 49
-#define MX51_MXC_INT_GPIO1_LOW 50
-#define MX51_MXC_INT_GPIO1_HIGH 51
-#define MX51_MXC_INT_GPIO2_LOW 52
-#define MX51_MXC_INT_GPIO2_HIGH 53
-#define MX51_MXC_INT_GPIO3_LOW 54
-#define MX51_MXC_INT_GPIO3_HIGH 55
-#define MX51_MXC_INT_GPIO4_LOW 56
-#define MX51_MXC_INT_GPIO4_HIGH 57
-#define MX51_MXC_INT_WDOG1 58
-#define MX51_MXC_INT_WDOG2 59
-#define MX51_MXC_INT_KPP 60
-#define MX51_MXC_INT_PWM1 61
-#define MX51_MXC_INT_I2C1 62
-#define MX51_MXC_INT_I2C2 63
-#define MX51_MXC_INT_HS_I2C 64
-#define MX51_MXC_INT_RESV65 65
-#define MX51_MXC_INT_RESV66 66
-#define MX51_MXC_INT_SIM_IPB 67
-#define MX51_MXC_INT_SIM_DAT 68
-#define MX51_MXC_INT_IIM 69
-#define MX51_MXC_INT_ATA 70
-#define MX51_MXC_INT_CCM1 71
-#define MX51_MXC_INT_CCM2 72
-#define MX51_MXC_INT_GPC1 73
-#define MX51_MXC_INT_GPC2 74
-#define MX51_MXC_INT_SRC 75
-#define MX51_MXC_INT_NM 76
-#define MX51_MXC_INT_PMU 77
-#define MX51_MXC_INT_CTI_IRQ 78
-#define MX51_MXC_INT_CTI1_TG0 79
-#define MX51_MXC_INT_CTI1_TG1 80
-#define MX51_MXC_INT_MCG_ERR 81
-#define MX51_MXC_INT_MCG_TMR 82
-#define MX51_MXC_INT_MCG_FUNC 83
-#define MX51_MXC_INT_GPU2_IRQ 84
-#define MX51_MXC_INT_GPU2_BUSY 85
-#define MX51_MXC_INT_RESV86 86
-#define MX51_MXC_INT_FEC 87
-#define MX51_MXC_INT_OWIRE 88
-#define MX51_MXC_INT_CTI1_TG2 89
-#define MX51_MXC_INT_SJC 90
-#define MX51_MXC_INT_SPDIF 91
-#define MX51_MXC_INT_TVE 92
-#define MX51_MXC_INT_FIRI 93
-#define MX51_MXC_INT_PWM2 94
-#define MX51_MXC_INT_SLIM_EXP 95
-#define MX51_MXC_INT_SSI3 96
-#define MX51_MXC_INT_EMI_BOOT 97
-#define MX51_MXC_INT_CTI1_TG3 98
-#define MX51_MXC_INT_SMC_RX 99
-#define MX51_MXC_INT_VPU_IDLE 100
-#define MX51_MXC_INT_EMI_NFC 101
-#define MX51_MXC_INT_GPU_IDLE 102
+#define MX51_MXC_INT_BASE 0
+#define MX51_MXC_INT_RESV0 0
+#define MX51_MXC_INT_MMC_SDHC1 1
+#define MX51_MXC_INT_MMC_SDHC2 2
+#define MX51_MXC_INT_MMC_SDHC3 3
+#define MX51_MXC_INT_MMC_SDHC4 4
+#define MX51_MXC_INT_RESV5 5
+#define MX51_INT_SDMA 6
+#define MX51_MXC_INT_IOMUX 7
+#define MX51_INT_NFC 8
+#define MX51_MXC_INT_VPU 9
+#define MX51_MXC_INT_IPU_ERR 10
+#define MX51_MXC_INT_IPU_SYN 11
+#define MX51_MXC_INT_GPU 12
+#define MX51_MXC_INT_RESV13 13
+#define MX51_MXC_INT_USB_H1 14
+#define MX51_MXC_INT_EMI 15
+#define MX51_MXC_INT_USB_H2 16
+#define MX51_MXC_INT_USB_H3 17
+#define MX51_MXC_INT_USB_OTG 18
+#define MX51_MXC_INT_SAHARA_H0 19
+#define MX51_MXC_INT_SAHARA_H1 20
+#define MX51_MXC_INT_SCC_SMN 21
+#define MX51_MXC_INT_SCC_STZ 22
+#define MX51_MXC_INT_SCC_SCM 23
+#define MX51_MXC_INT_SRTC_NTZ 24
+#define MX51_MXC_INT_SRTC_TZ 25
+#define MX51_MXC_INT_RTIC 26
+#define MX51_MXC_INT_CSU 27
+#define MX51_MXC_INT_SLIM_B 28
+#define MX51_INT_SSI1 29
+#define MX51_INT_SSI2 30
+#define MX51_INT_UART1 31
+#define MX51_INT_UART2 32
+#define MX51_INT_UART3 33
+#define MX51_MXC_INT_RESV34 34
+#define MX51_MXC_INT_RESV35 35
+#define MX51_INT_ECSPI1 36
+#define MX51_INT_ECSPI2 37
+#define MX51_INT_CSPI 38
+#define MX51_MXC_INT_GPT 39
+#define MX51_MXC_INT_EPIT1 40
+#define MX51_MXC_INT_EPIT2 41
+#define MX51_MXC_INT_GPIO1_INT7 42
+#define MX51_MXC_INT_GPIO1_INT6 43
+#define MX51_MXC_INT_GPIO1_INT5 44
+#define MX51_MXC_INT_GPIO1_INT4 45
+#define MX51_MXC_INT_GPIO1_INT3 46
+#define MX51_MXC_INT_GPIO1_INT2 47
+#define MX51_MXC_INT_GPIO1_INT1 48
+#define MX51_MXC_INT_GPIO1_INT0 49
+#define MX51_MXC_INT_GPIO1_LOW 50
+#define MX51_MXC_INT_GPIO1_HIGH 51
+#define MX51_MXC_INT_GPIO2_LOW 52
+#define MX51_MXC_INT_GPIO2_HIGH 53
+#define MX51_MXC_INT_GPIO3_LOW 54
+#define MX51_MXC_INT_GPIO3_HIGH 55
+#define MX51_MXC_INT_GPIO4_LOW 56
+#define MX51_MXC_INT_GPIO4_HIGH 57
+#define MX51_MXC_INT_WDOG1 58
+#define MX51_MXC_INT_WDOG2 59
+#define MX51_MXC_INT_KPP 60
+#define MX51_MXC_INT_PWM1 61
+#define MX51_INT_I2C1 62
+#define MX51_INT_I2C2 63
+#define MX51_MXC_INT_HS_I2C 64
+#define MX51_MXC_INT_RESV65 65
+#define MX51_MXC_INT_RESV66 66
+#define MX51_MXC_INT_SIM_IPB 67
+#define MX51_MXC_INT_SIM_DAT 68
+#define MX51_MXC_INT_IIM 69
+#define MX51_MXC_INT_ATA 70
+#define MX51_MXC_INT_CCM1 71
+#define MX51_MXC_INT_CCM2 72
+#define MX51_MXC_INT_GPC1 73
+#define MX51_MXC_INT_GPC2 74
+#define MX51_MXC_INT_SRC 75
+#define MX51_MXC_INT_NM 76
+#define MX51_MXC_INT_PMU 77
+#define MX51_MXC_INT_CTI_IRQ 78
+#define MX51_MXC_INT_CTI1_TG0 79
+#define MX51_MXC_INT_CTI1_TG1 80
+#define MX51_MXC_INT_MCG_ERR 81
+#define MX51_MXC_INT_MCG_TMR 82
+#define MX51_MXC_INT_MCG_FUNC 83
+#define MX51_MXC_INT_GPU2_IRQ 84
+#define MX51_MXC_INT_GPU2_BUSY 85
+#define MX51_MXC_INT_RESV86 86
+#define MX51_INT_FEC 87
+#define MX51_MXC_INT_OWIRE 88
+#define MX51_MXC_INT_CTI1_TG2 89
+#define MX51_MXC_INT_SJC 90
+#define MX51_MXC_INT_SPDIF 91
+#define MX51_MXC_INT_TVE 92
+#define MX51_MXC_INT_FIRI 93
+#define MX51_MXC_INT_PWM2 94
+#define MX51_MXC_INT_SLIM_EXP 95
+#define MX51_MXC_INT_SSI3 96
+#define MX51_MXC_INT_EMI_BOOT 97
+#define MX51_MXC_INT_CTI1_TG3 98
+#define MX51_MXC_INT_SMC_RX 99
+#define MX51_MXC_INT_VPU_IDLE 100
+#define MX51_MXC_INT_EMI_NFC 101
+#define MX51_MXC_INT_GPU_IDLE 102
/* silicon revisions specific to i.MX51 */
-#define MX51_CHIP_REV_1_0 0x10
-#define MX51_CHIP_REV_1_1 0x11
-#define MX51_CHIP_REV_1_2 0x12
-#define MX51_CHIP_REV_1_3 0x13
-#define MX51_CHIP_REV_2_0 0x20
-#define MX51_CHIP_REV_2_1 0x21
-#define MX51_CHIP_REV_2_2 0x22
-#define MX51_CHIP_REV_2_3 0x23
-#define MX51_CHIP_REV_3_0 0x30
-#define MX51_CHIP_REV_3_1 0x31
-#define MX51_CHIP_REV_3_2 0x32
-
-/* Mandatory defines used globally */
+#define MX51_CHIP_REV_1_0 0x10
+#define MX51_CHIP_REV_1_1 0x11
+#define MX51_CHIP_REV_1_2 0x12
+#define MX51_CHIP_REV_1_3 0x13
+#define MX51_CHIP_REV_2_0 0x20
+#define MX51_CHIP_REV_2_1 0x21
+#define MX51_CHIP_REV_2_2 0x22
+#define MX51_CHIP_REV_2_3 0x23
+#define MX51_CHIP_REV_3_0 0x30
+#define MX51_CHIP_REV_3_1 0x31
+#define MX51_CHIP_REV_3_2 0x32
#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
-
extern int mx51_revision(void);
#endif
-#endif /* __ASM_ARCH_MXC_MX51_H__ */
+/* tape-out 1 defines */
+#define MX51_TZIC_BASE_ADDR_TO1 0x8fffc000
+
+#endif /* ifndef __MACH_MX51_H__ */
diff --git a/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h b/arch/arm/plat-pxa/include/plat/pxa27x_keypad.h
similarity index 83%
rename from arch/arm/mach-pxa/include/mach/pxa27x_keypad.h
rename to arch/arm/plat-pxa/include/plat/pxa27x_keypad.h
index 7b4eadc..abcc36e 100644
--- a/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h
+++ b/arch/arm/plat-pxa/include/plat/pxa27x_keypad.h
@@ -25,6 +25,13 @@
*
* 4. matrix key and direct key will use the same debounce_interval by
* default, which should be sufficient in most cases
+ *
+ * pxa168 keypad platform specific parameter
+ *
+ * NOTE:
+ * clear_wakeup_event callback is a workaround required to clear the
+ * keypad interrupt. The keypad wake must be cleared in addition to
+ * reading the MI/DI bits in the KPC register.
*/
struct pxa27x_keypad_platform_data {
@@ -52,6 +59,9 @@
/* key debounce interval */
unsigned int debounce_interval;
+
+ /* clear wakeup event requirement for pxa168 */
+ void (*clear_wakeup_event)(void);
};
extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info);
diff --git a/arch/arm/plat-tcc/Kconfig b/arch/arm/plat-tcc/Kconfig
new file mode 100644
index 0000000..1bf4995
--- /dev/null
+++ b/arch/arm/plat-tcc/Kconfig
@@ -0,0 +1,20 @@
+if ARCH_TCC_926
+
+menu "Telechips ARM926-based CPUs"
+
+choice
+ prompt "Telechips CPU type:"
+ default ARCH_TCC8K
+
+config ARCH_TCC8K
+ bool TCC8000
+ select USB_ARCH_HAS_OHCI
+ help
+ Support for Telechips TCC8000 systems
+
+endchoice
+
+source "arch/arm/mach-tcc8k/Kconfig"
+
+endmenu
+endif
diff --git a/arch/arm/plat-tcc/Makefile b/arch/arm/plat-tcc/Makefile
new file mode 100644
index 0000000..eceabc8
--- /dev/null
+++ b/arch/arm/plat-tcc/Makefile
@@ -0,0 +1,3 @@
+# "Telechips Platform Common Modules"
+
+obj-y := clock.o system.o
diff --git a/arch/arm/plat-tcc/clock.c b/arch/arm/plat-tcc/clock.c
new file mode 100644
index 0000000..f3ced10
--- /dev/null
+++ b/arch/arm/plat-tcc/clock.c
@@ -0,0 +1,179 @@
+/*
+ * Clock framework for Telechips SoCs
+ * Based on arch/arm/plat-mxc/clock.c
+ *
+ * Copyright (C) 2004 - 2005 Nokia corporation
+ * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
+ * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ * Copyright 2010 Hans J. Koch, hjk@linutronix.de
+ *
+ * Licensed under the terms of the GPL v2.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/string.h>
+
+#include <mach/clock.h>
+#include <mach/hardware.h>
+
+static DEFINE_MUTEX(clocks_mutex);
+
+/*-------------------------------------------------------------------------
+ * Standard clock functions defined in include/linux/clk.h
+ *-------------------------------------------------------------------------*/
+
+static void __clk_disable(struct clk *clk)
+{
+ BUG_ON(clk->refcount == 0);
+
+ if (!(--clk->refcount) && clk->disable) {
+ /* Unconditionally disable the clock in hardware */
+ clk->disable(clk);
+ /* recursively disable parents */
+ if (clk->parent)
+ __clk_disable(clk->parent);
+ }
+}
+
+static int __clk_enable(struct clk *clk)
+{
+ int ret = 0;
+
+ if (clk->refcount++ == 0 && clk->enable) {
+ if (clk->parent)
+ ret = __clk_enable(clk->parent);
+ if (ret)
+ return ret;
+ else
+ return clk->enable(clk);
+ }
+
+ return 0;
+}
+
+/* This function increments the reference count on the clock and enables the
+ * clock if not already enabled. The parent clock tree is recursively enabled
+ */
+int clk_enable(struct clk *clk)
+{
+ int ret = 0;
+
+ if (!clk)
+ return -EINVAL;
+
+ mutex_lock(&clocks_mutex);
+ ret = __clk_enable(clk);
+ mutex_unlock(&clocks_mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(clk_enable);
+
+/* This function decrements the reference count on the clock and disables
+ * the clock when reference count is 0. The parent clock tree is
+ * recursively disabled
+ */
+void clk_disable(struct clk *clk)
+{
+ if (!clk)
+ return;
+
+ mutex_lock(&clocks_mutex);
+ __clk_disable(clk);
+ mutex_unlock(&clocks_mutex);
+}
+EXPORT_SYMBOL_GPL(clk_disable);
+
+/* Retrieve the *current* clock rate. If the clock itself
+ * does not provide a special calculation routine, ask
+ * its parent and so on, until one is able to return
+ * a valid clock rate
+ */
+unsigned long clk_get_rate(struct clk *clk)
+{
+ if (!clk)
+ return 0UL;
+
+ if (clk->get_rate)
+ return clk->get_rate(clk);
+
+ return clk_get_rate(clk->parent);
+}
+EXPORT_SYMBOL_GPL(clk_get_rate);
+
+/* Round the requested clock rate to the nearest supported
+ * rate that is less than or equal to the requested rate.
+ * This is dependent on the clock's current parent.
+ */
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ if (!clk)
+ return 0;
+ if (!clk->round_rate)
+ return 0;
+
+ return clk->round_rate(clk, rate);
+}
+EXPORT_SYMBOL_GPL(clk_round_rate);
+
+/* Set the clock to the requested clock rate. The rate must
+ * match a supported rate exactly based on what clk_round_rate returns
+ */
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ int ret = -EINVAL;
+
+ if (!clk)
+ return ret;
+ if (!clk->set_rate || !rate)
+ return ret;
+
+ mutex_lock(&clocks_mutex);
+ ret = clk->set_rate(clk, rate);
+ mutex_unlock(&clocks_mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(clk_set_rate);
+
+/* Set the clock's parent to another clock source */
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ struct clk *old;
+ int ret = -EINVAL;
+
+ if (!clk)
+ return ret;
+ if (!clk->set_parent || !parent)
+ return ret;
+
+ mutex_lock(&clocks_mutex);
+ old = clk->parent;
+ if (clk->refcount)
+ __clk_enable(parent);
+ ret = clk->set_parent(clk, parent);
+ if (ret)
+ old = parent;
+ if (clk->refcount)
+ __clk_disable(old);
+ mutex_unlock(&clocks_mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(clk_set_parent);
+
+/* Retrieve the clock's parent clock source */
+struct clk *clk_get_parent(struct clk *clk)
+{
+ if (!clk)
+ return NULL;
+
+ return clk->parent;
+}
+EXPORT_SYMBOL_GPL(clk_get_parent);
diff --git a/arch/arm/plat-tcc/include/mach/clkdev.h b/arch/arm/plat-tcc/include/mach/clkdev.h
new file mode 100644
index 0000000..04b37a8
--- /dev/null
+++ b/arch/arm/plat-tcc/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/plat-tcc/include/mach/clock.h b/arch/arm/plat-tcc/include/mach/clock.h
new file mode 100644
index 0000000..a12f58a
--- /dev/null
+++ b/arch/arm/plat-tcc/include/mach/clock.h
@@ -0,0 +1,48 @@
+/*
+ * Low level clock header file for Telechips TCC architecture
+ * (C) 2010 Hans J. Koch <hjk@linutronix.de>
+ *
+ * Licensed under the GPL v2.
+ */
+
+#ifndef __ASM_ARCH_TCC_CLOCK_H__
+#define __ASM_ARCH_TCC_CLOCK_H__
+
+#ifndef __ASSEMBLY__
+
+struct clk {
+ struct clk *parent;
+ /* id number of a root clock, 0 for normal clocks */
+ int root_id;
+ /* Reference count of clock enable/disable */
+ int refcount;
+ /* Address of associated BCLKCTRx register. Must be set. */
+ void __iomem *bclkctr;
+ /* Bit position for BCLKCTRx. Must be set. */
+ int bclk_shift;
+ /* Address of ACLKxxx register, if any. */
+ void __iomem *aclkreg;
+ /* get the current clock rate (always a fresh value) */
+ unsigned long (*get_rate) (struct clk *);
+ /* Function ptr to set the clock to a new rate. The rate must match a
+ supported rate returned from round_rate. Leave blank if clock is not
+ programmable */
+ int (*set_rate) (struct clk *, unsigned long);
+ /* Function ptr to round the requested clock rate to the nearest
+ supported rate that is less than or equal to the requested rate. */
+ unsigned long (*round_rate) (struct clk *, unsigned long);
+ /* Function ptr to enable the clock. Leave blank if clock can not
+ be gated. */
+ int (*enable) (struct clk *);
+ /* Function ptr to disable the clock. Leave blank if clock can not
+ be gated. */
+ void (*disable) (struct clk *);
+ /* Function ptr to set the parent clock of the clock. */
+ int (*set_parent) (struct clk *, struct clk *);
+};
+
+int clk_register(struct clk *clk);
+void clk_unregister(struct clk *clk);
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_ARCH_MXC_CLOCK_H__ */
diff --git a/arch/arm/plat-tcc/include/mach/debug-macro.S b/arch/arm/plat-tcc/include/mach/debug-macro.S
new file mode 100644
index 0000000..9753784
--- /dev/null
+++ b/arch/arm/plat-tcc/include/mach/debug-macro.S
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 1994-1999 Russell King
+ * Copyright (C) 2008-2009 Telechips
+ * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+ .macro addruart,rx,tmp
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ moveq \rx, #0x90000000 @ physical base address
+ movne \rx, #0xF1000000 @ virtual base
+ orr \rx, \rx, #0x00007000 @ UART0
+ .endm
+
+ .macro senduart,rd,rx
+ strb \rd, [\rx, #0x44]
+ .endm
+
+ .macro waituart,rd,rx
+ .endm
+
+ .macro busyuart,rd,rx
+1001:
+ ldr \rd, [\rx, #0x14]
+ tst \rd, #0x20
+
+ beq 1001b
+ .endm
diff --git a/arch/arm/plat-tcc/include/mach/entry-macro.S b/arch/arm/plat-tcc/include/mach/entry-macro.S
new file mode 100644
index 0000000..748f401
--- /dev/null
+++ b/arch/arm/plat-tcc/include/mach/entry-macro.S
@@ -0,0 +1,68 @@
+/*
+ * include/asm-arm/arch-tcc83x/entry-macro.S
+ *
+ * Author : <linux@telechips.com>
+ * Created: June 10, 2008
+ * Description: Low-level IRQ helper macros for Telechips-based platforms
+ *
+ * Copyright (C) 2008-2009 Telechips
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+ ldr \base, =0xF2003000 @ base address of PIC registers
+
+ @@ read MREQ register of PIC0
+
+ mov \irqnr, #0
+ ldr \irqstat, [\base, #0x00000014 ] @ lower 32 interrupts
+ cmp \irqstat, #0
+ bne 1001f
+
+ @@ read MREQ register of PIC1
+
+ ldr \irqstat, [\base, #0x00000094] @ upper 32 interrupts
+ cmp \irqstat, #0
+ beq 1002f
+ mov \irqnr, #0x20
+
+1001:
+ movs \tmp, \irqstat, lsl #16
+ movne \irqstat, \tmp
+ addeq \irqnr, \irqnr, #16
+
+ movs \tmp, \irqstat, lsl #8
+ movne \irqstat, \tmp
+ addeq \irqnr, \irqnr, #8
+
+ movs \tmp, \irqstat, lsl #4
+ movne \irqstat, \tmp
+ addeq \irqnr, \irqnr, #4
+
+ movs \tmp, \irqstat, lsl #2
+ movne \irqstat, \tmp
+ addeq \irqnr, \irqnr, #2
+
+ movs \tmp, \irqstat, lsl #1
+ addeq \irqnr, \irqnr, #1
+ orrs \base, \base, #1
+1002:
+ @@ exit here, Z flag unset if IRQ
+
+ .endm
diff --git a/arch/arm/plat-tcc/include/mach/hardware.h b/arch/arm/plat-tcc/include/mach/hardware.h
new file mode 100644
index 0000000..e70d126
--- /dev/null
+++ b/arch/arm/plat-tcc/include/mach/hardware.h
@@ -0,0 +1,43 @@
+/*
+ * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
+ * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
+ * and Dirk Behme <dirk.behme@de.bosch.com>
+ * Rewritten by: <linux@telechips.com>
+ * Description: Hardware definitions for TCC8300 processors and boards
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Copyright (C) 2008-2009 Telechips
+ *
+ * Modifications for mainline (C) 2009 Hans J. Koch <hjk@linutronix.de>
+ *
+ * Licensed under the terms of the GNU Pulic License version 2.
+ */
+
+#ifndef __ASM_ARCH_TCC_HARDWARE_H
+#define __ASM_ARCH_TCC_HARDWARE_H
+
+#include <asm/sizes.h>
+#ifndef __ASSEMBLER__
+#include <asm/types.h>
+#endif
+#include <mach/io.h>
+
+/*
+ * ----------------------------------------------------------------------------
+ * Clocks
+ * ----------------------------------------------------------------------------
+ */
+#define CLKGEN_REG_BASE 0xfffece00
+#define ARM_CKCTL (CLKGEN_REG_BASE + 0x0)
+#define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4)
+#define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8)
+#define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC)
+#define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10)
+#define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14)
+#define ARM_SYSST (CLKGEN_REG_BASE + 0x18)
+#define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24)
+
+/* DPLL control registers */
+#define DPLL_CTL 0xfffecf00
+
+#endif /* __ASM_ARCH_TCC_HARDWARE_H */
diff --git a/arch/arm/plat-tcc/include/mach/io.h b/arch/arm/plat-tcc/include/mach/io.h
new file mode 100644
index 0000000..3e911d3
--- /dev/null
+++ b/arch/arm/plat-tcc/include/mach/io.h
@@ -0,0 +1,23 @@
+/*
+ * IO definitions for TCC8000 processors and boards
+ *
+ * Copyright (C) 1997-1999 Russell King
+ * Copyright (C) 2008-2009 Telechips
+ * Copyright (C) 2010 Hans J. Koch <hjk@linutronix.de>
+ *
+ * Licensed under the terms of the GNU Public License version 2.
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a) __typesafe_io(a)
+#define __mem_pci(a) (a)
+
+#endif
diff --git a/arch/arm/plat-tcc/include/mach/irqs.h b/arch/arm/plat-tcc/include/mach/irqs.h
new file mode 100644
index 0000000..da86389
--- /dev/null
+++ b/arch/arm/plat-tcc/include/mach/irqs.h
@@ -0,0 +1,83 @@
+/*
+ * IRQ definitions for TCC8xxx
+ *
+ * Copyright (C) 2008-2009 Telechips
+ * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
+ *
+ * Licensed under the terms of the GPL v2.
+ *
+ */
+
+#ifndef __ASM_ARCH_TCC_IRQS_H
+#define __ASM_ARCH_TCC_IRQS_H
+
+#define NR_IRQS 64
+
+/* PIC0 interrupts */
+#define INT_ADMA1 0
+#define INT_BDMA 1
+#define INT_ADMA0 2
+#define INT_GDMA1 3
+#define INT_I2S0RX 4
+#define INT_I2S0TX 5
+#define INT_TC 6
+#define INT_UART0 7
+#define INT_USBD 8
+#define INT_SPI0TX 9
+#define INT_UDMA 10
+#define INT_LIRQ 11
+#define INT_GDMA2 12
+#define INT_GDMA0 13
+#define INT_TC32 14
+#define INT_LCD 15
+#define INT_ADC 16
+#define INT_I2C 17
+#define INT_RTCP 18
+#define INT_RTCA 19
+#define INT_NFC 20
+#define INT_SD0 21
+#define INT_GSB0 22
+#define INT_PK 23
+#define INT_USBH0 24
+#define INT_USBH1 25
+#define INT_G2D 26
+#define INT_ECC 27
+#define INT_SPI0RX 28
+#define INT_UART1 29
+#define INT_MSCL 30
+#define INT_GSB1 31
+/* PIC1 interrupts */
+#define INT_E0 32
+#define INT_E1 33
+#define INT_E2 34
+#define INT_E3 35
+#define INT_E4 36
+#define INT_E5 37
+#define INT_E6 38
+#define INT_E7 39
+#define INT_UART2 40
+#define INT_UART3 41
+#define INT_SPI1TX 42
+#define INT_SPI1RX 43
+#define INT_GSB2 44
+#define INT_SPDIF 45
+#define INT_CDIF 46
+#define INT_VBON 47
+#define INT_VBOFF 48
+#define INT_SD1 49
+#define INT_UART4 50
+#define INT_GDMA3 51
+#define INT_I2S1RX 52
+#define INT_I2S1TX 53
+#define INT_CAN0 54
+#define INT_CAN1 55
+#define INT_GSB3 56
+#define INT_KRST 57
+#define INT_UNUSED 58
+#define INT_SD0D3 59
+#define INT_SD1D3 60
+#define INT_GPS0 61
+#define INT_GPS1 62
+#define INT_GPS2 63
+
+#endif /* ASM_ARCH_TCC_IRQS_H */
diff --git a/arch/arm/plat-tcc/include/mach/memory.h b/arch/arm/plat-tcc/include/mach/memory.h
new file mode 100644
index 0000000..cd91ba8
--- /dev/null
+++ b/arch/arm/plat-tcc/include/mach/memory.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 1999 ARM Limited
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Copyright (C) 2008-2009 Telechips
+ * Copyright (C) 2010 Hans J. Koch <hjk@linutronix.de>
+ *
+ * Licensed under the terms of the GPL v2.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET UL(0x20000000)
+
+#endif
diff --git a/arch/arm/plat-tcc/include/mach/system.h b/arch/arm/plat-tcc/include/mach/system.h
new file mode 100644
index 0000000..909e603
--- /dev/null
+++ b/arch/arm/plat-tcc/include/mach/system.h
@@ -0,0 +1,31 @@
+/*
+ * Author: <linux@telechips.com>
+ * Created: June 10, 2008
+ * Description: LINUX SYSTEM FUNCTIONS for TCC83x
+ *
+ * Copyright (C) 2008-2009 Telechips
+ *
+ * Licensed under the terms of the GPL v2.
+ *
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+#include <linux/clk.h>
+
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+
+extern void plat_tcc_reboot(void);
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+ plat_tcc_reboot();
+}
+
+#endif
diff --git a/arch/arm/plat-tcc/include/mach/tcc8k-regs.h b/arch/arm/plat-tcc/include/mach/tcc8k-regs.h
new file mode 100644
index 0000000..1d94282
--- /dev/null
+++ b/arch/arm/plat-tcc/include/mach/tcc8k-regs.h
@@ -0,0 +1,807 @@
+/*
+ * Telechips TCC8000 register definitions
+ *
+ * (C) 2009 Hans J. Koch <hjk@linutronix.de>
+ *
+ * Licensed under the terms of the GPLv2.
+ */
+
+#ifndef TCC8K_REGS_H
+#define TCC8K_REGS_H
+
+#include <linux/types.h>
+
+#define EXT_SDRAM_BASE 0x20000000
+#define INT_SRAM_BASE 0x30000000
+#define INT_SRAM_SIZE SZ_32K
+#define CS0_BASE 0x40000000
+#define CS1_BASE 0x50000000
+#define CS1_SIZE SZ_64K
+#define CS2_BASE 0x60000000
+#define CS3_BASE 0x70000000
+#define AHB_PERI_BASE 0x80000000
+#define AHB_PERI_SIZE SZ_64K
+#define APB0_PERI_BASE 0x90000000
+#define APB0_PERI_SIZE SZ_128K
+#define APB1_PERI_BASE 0x98000000
+#define APB1_PERI_SIZE SZ_128K
+#define DATA_TCM_BASE 0xa0000000
+#define DATA_TCM_SIZE SZ_8K
+#define EXT_MEM_CTRL_BASE 0xf0000000
+#define EXT_MEM_CTRL_SIZE SZ_4K
+
+#define CS1_BASE_VIRT (void __iomem *)0xf7000000
+#define AHB_PERI_BASE_VIRT (void __iomem *)0xf4000000
+#define APB0_PERI_BASE_VIRT (void __iomem *)0xf1000000
+#define APB1_PERI_BASE_VIRT (void __iomem *)0xf2000000
+#define EXT_MEM_CTRL_BASE_VIRT (void __iomem *)0xf3000000
+#define INT_SRAM_BASE_VIRT (void __iomem *)0xf5000000
+#define DATA_TCM_BASE_VIRT (void __iomem *)0xf6000000
+
+#define __REG(x) (*((volatile u32 *)(x)))
+
+/* USB Device Controller Registers */
+#define UDC_BASE (AHB_PERI_BASE_VIRT + 0x8000)
+#define UDC_BASE_PHYS (AHB_PERI_BASE + 0x8000)
+
+#define UDC_IR_OFFS 0x00
+#define UDC_EIR_OFFS 0x04
+#define UDC_EIER_OFFS 0x08
+#define UDC_FAR_OFFS 0x0c
+#define UDC_FNR_OFFS 0x10
+#define UDC_EDR_OFFS 0x14
+#define UDC_RT_OFFS 0x18
+#define UDC_SSR_OFFS 0x1c
+#define UDC_SCR_OFFS 0x20
+#define UDC_EP0SR_OFFS 0x24
+#define UDC_EP0CR_OFFS 0x28
+
+#define UDC_ESR_OFFS 0x2c
+#define UDC_ECR_OFFS 0x30
+#define UDC_BRCR_OFFS 0x34
+#define UDC_BWCR_OFFS 0x38
+#define UDC_MPR_OFFS 0x3c
+#define UDC_DCR_OFFS 0x40
+#define UDC_DTCR_OFFS 0x44
+#define UDC_DFCR_OFFS 0x48
+#define UDC_DTTCR1_OFFS 0x4c
+#define UDC_DTTCR2_OFFS 0x50
+#define UDC_ESR2_OFFS 0x54
+
+#define UDC_SCR2_OFFS 0x58
+#define UDC_EP0BUF_OFFS 0x60
+#define UDC_EP1BUF_OFFS 0x64
+#define UDC_EP2BUF_OFFS 0x68
+#define UDC_EP3BUF_OFFS 0x6c
+#define UDC_PLICR_OFFS 0xa0
+#define UDC_PCR_OFFS 0xa4
+
+#define UDC_UPCR0_OFFS 0xc8
+#define UDC_UPCR1_OFFS 0xcc
+#define UDC_UPCR2_OFFS 0xd0
+#define UDC_UPCR3_OFFS 0xd4
+
+/* Bits in UDC_EIR */
+#define UDC_EIR_EP0I (1 << 0)
+#define UDC_EIR_EP1I (1 << 1)
+#define UDC_EIR_EP2I (1 << 2)
+#define UDC_EIR_EP3I (1 << 3)
+#define UDC_EIR_EPI_MASK 0x0f
+
+/* Bits in UDC_EIER */
+#define UDC_EIER_EP0IE (1 << 0)
+#define UDC_EIER_EP1IE (1 << 1)
+#define UDC_EIER_EP2IE (1 << 2)
+#define UDC_EIER_EP3IE (1 << 3)
+
+/* Bits in UDC_FNR */
+#define UDC_FNR_FN_MASK 0x7ff
+#define UDC_FNR_SM (1 << 13)
+#define UDC_FNR_FTL (1 << 14)
+
+/* Bits in UDC_SSR */
+#define UDC_SSR_HFRES (1 << 0)
+#define UDC_SSR_HFSUSP (1 << 1)
+#define UDC_SSR_HFRM (1 << 2)
+#define UDC_SSR_SDE (1 << 3)
+#define UDC_SSR_HSP (1 << 4)
+#define UDC_SSR_DM (1 << 5)
+#define UDC_SSR_DP (1 << 6)
+#define UDC_SSR_TBM (1 << 7)
+#define UDC_SSR_VBON (1 << 8)
+#define UDC_SSR_VBOFF (1 << 9)
+#define UDC_SSR_EOERR (1 << 10)
+#define UDC_SSR_DCERR (1 << 11)
+#define UDC_SSR_TCERR (1 << 12)
+#define UDC_SSR_BSERR (1 << 13)
+#define UDC_SSR_TMERR (1 << 14)
+#define UDC_SSR_BAERR (1 << 15)
+
+/* Bits in UDC_SCR */
+#define UDC_SCR_HRESE (1 << 0)
+#define UDC_SCR_HSSPE (1 << 1)
+#define UDC_SCR_RRDE (1 << 5)
+#define UDC_SCR_SPDEN (1 << 6)
+#define UDC_SCR_DIEN (1 << 12)
+
+/* Bits in UDC_EP0SR */
+#define UDC_EP0SR_RSR (1 << 0)
+#define UDC_EP0SR_TST (1 << 1)
+#define UDC_EP0SR_SHT (1 << 4)
+#define UDC_EP0SR_LWO (1 << 6)
+
+/* Bits in UDC_EP0CR */
+#define UDC_EP0CR_ESS (1 << 1)
+
+/* Bits in UDC_ESR */
+#define UDC_ESR_RPS (1 << 0)
+#define UDC_ESR_TPS (1 << 1)
+#define UDC_ESR_LWO (1 << 4)
+#define UDC_ESR_FFS (1 << 6)
+
+/* Bits in UDC_ECR */
+#define UDC_ECR_ESS (1 << 1)
+#define UDC_ECR_CDP (1 << 2)
+
+#define UDC_ECR_FLUSH (1 << 6)
+#define UDC_ECR_DUEN (1 << 7)
+
+/* Bits in UDC_UPCR0 */
+#define UDC_UPCR0_VBD (1 << 1)
+#define UDC_UPCR0_VBDS (1 << 6)
+#define UDC_UPCR0_RCD_12 (0x0 << 9)
+#define UDC_UPCR0_RCD_24 (0x1 << 9)
+#define UDC_UPCR0_RCD_48 (0x2 << 9)
+#define UDC_UPCR0_RCS_EXT (0x1 << 11)
+#define UDC_UPCR0_RCS_XTAL (0x0 << 11)
+
+/* Bits in UDC_UPCR1 */
+#define UDC_UPCR1_CDT(x) ((x) << 0)
+#define UDC_UPCR1_OTGT(x) ((x) << 3)
+#define UDC_UPCR1_SQRXT(x) ((x) << 8)
+#define UDC_UPCR1_TXFSLST(x) ((x) << 12)
+
+/* Bits in UDC_UPCR2 */
+#define UDC_UPCR2_TP (1 << 0)
+#define UDC_UPCR2_TXRT(x) ((x) << 2)
+#define UDC_UPCR2_TXVRT(x) ((x) << 5)
+#define UDC_UPCR2_OPMODE(x) ((x) << 9)
+#define UDC_UPCR2_XCVRSEL(x) ((x) << 12)
+#define UDC_UPCR2_TM (1 << 14)
+
+/* USB Host Controller registers */
+#define USBH0_BASE (AHB_PERI_BASE_VIRT + 0xb000)
+#define USBH1_BASE (AHB_PERI_BASE_VIRT + 0xb800)
+
+#define OHCI_INT_ENABLE_OFFS 0x10
+
+#define RH_DESCRIPTOR_A_OFFS 0x48
+#define RH_DESCRIPTOR_B_OFFS 0x4c
+
+#define USBHTCFG0_OFFS 0x100
+#define USBHHCFG0_OFFS 0x104
+#define USBHHCFG1_OFFS 0x104
+
+/* DMA controller registers */
+#define DMAC0_BASE (AHB_PERI_BASE + 0x4000)
+#define DMAC1_BASE (AHB_PERI_BASE + 0xa000)
+#define DMAC2_BASE (AHB_PERI_BASE + 0x4800)
+#define DMAC3_BASE (AHB_PERI_BASE + 0xa800)
+
+#define DMAC_CH_OFFSET(ch) (ch * 0x30)
+
+#define ST_SADR_OFFS 0x00
+#define SPARAM_OFFS 0x04
+#define C_SADR_OFFS 0x0c
+#define ST_DADR_OFFS 0x10
+#define DPARAM_OFFS 0x14
+#define C_DADR_OFFS 0x1c
+#define HCOUNT_OFFS 0x20
+#define CHCTRL_OFFS 0x24
+#define RPTCTRL_OFFS 0x28
+#define EXTREQ_A_OFFS 0x2c
+
+/* Bits in CHCTRL register */
+#define CHCTRL_EN (1 << 0)
+
+#define CHCTRL_IEN (1 << 2)
+#define CHCTRL_FLAG (1 << 3)
+#define CHCTRL_WSIZE8 (0 << 4)
+#define CHCTRL_WSIZE16 (1 << 4)
+#define CHCTRL_WSIZE32 (2 << 4)
+
+#define CHCTRL_BSIZE1 (0 << 6)
+#define CHCTRL_BSIZE2 (1 << 6)
+#define CHCTRL_BSIZE4 (2 << 6)
+#define CHCTRL_BSIZE8 (3 << 6)
+
+#define CHCTRL_TYPE_SINGLE_E (0 << 8)
+#define CHCTRL_TYPE_HW (1 << 8)
+#define CHCTRL_TYPE_SW (2 << 8)
+#define CHCTRL_TYPE_SINGLE_L (3 << 8)
+
+#define CHCTRL_BST (1 << 10)
+
+/* Use DMA controller 0, channel 2 for USB */
+#define USB_DMA_BASE (DMAC0_BASE + DMAC_CH_OFFSET(2))
+
+/* NAND flash controller registers */
+#define NFC_BASE (AHB_PERI_BASE_VIRT + 0xd000)
+#define NFC_BASE_PHYS (AHB_PERI_BASE + 0xd000)
+
+#define NFC_CMD_OFFS 0x00
+#define NFC_LADDR_OFFS 0x04
+#define NFC_BADDR_OFFS 0x08
+#define NFC_SADDR_OFFS 0x0c
+#define NFC_WDATA_OFFS 0x10
+#define NFC_LDATA_OFFS 0x20
+#define NFC_SDATA_OFFS 0x40
+#define NFC_CTRL_OFFS 0x50
+#define NFC_PSTART_OFFS 0x54
+#define NFC_RSTART_OFFS 0x58
+#define NFC_DSIZE_OFFS 0x5c
+#define NFC_IREQ_OFFS 0x60
+#define NFC_RST_OFFS 0x64
+#define NFC_CTRL1_OFFS 0x68
+#define NFC_MDATA_OFFS 0x70
+
+#define NFC_WDATA_PHYS_ADDR (NFC_BASE_PHYS + NFC_WDATA_OFFS)
+
+/* Bits in NFC_CTRL */
+#define NFC_CTRL_BHLD_MASK (0xf << 0)
+#define NFC_CTRL_BPW_MASK (0xf << 4)
+#define NFC_CTRL_BSTP_MASK (0xf << 8)
+#define NFC_CTRL_CADDR_MASK (0x7 << 12)
+#define NFC_CTRL_CADDR_1 (0x0 << 12)
+#define NFC_CTRL_CADDR_2 (0x1 << 12)
+#define NFC_CTRL_CADDR_3 (0x2 << 12)
+#define NFC_CTRL_CADDR_4 (0x3 << 12)
+#define NFC_CTRL_CADDR_5 (0x4 << 12)
+#define NFC_CTRL_MSK (1 << 15)
+#define NFC_CTRL_PSIZE256 (0 << 16)
+#define NFC_CTRL_PSIZE512 (1 << 16)
+#define NFC_CTRL_PSIZE1024 (2 << 16)
+#define NFC_CTRL_PSIZE2048 (3 << 16)
+#define NFC_CTRL_PSIZE4096 (4 << 16)
+#define NFC_CTRL_PSIZE_MASK (7 << 16)
+#define NFC_CTRL_BSIZE1 (0 << 19)
+#define NFC_CTRL_BSIZE2 (1 << 19)
+#define NFC_CTRL_BSIZE4 (2 << 19)
+#define NFC_CTRL_BSIZE8 (3 << 19)
+#define NFC_CTRL_BSIZE_MASK (3 << 19)
+#define NFC_CTRL_RDY (1 << 21)
+#define NFC_CTRL_CS0SEL (1 << 22)
+#define NFC_CTRL_CS1SEL (1 << 23)
+#define NFC_CTRL_CS2SEL (1 << 24)
+#define NFC_CTRL_CS3SEL (1 << 25)
+#define NFC_CTRL_CSMASK (0xf << 22)
+#define NFC_CTRL_BW (1 << 26)
+#define NFC_CTRL_FS (1 << 27)
+#define NFC_CTRL_DEN (1 << 28)
+#define NFC_CTRL_READ_IEN (1 << 29)
+#define NFC_CTRL_PROG_IEN (1 << 30)
+#define NFC_CTRL_RDY_IEN (1 << 31)
+
+/* Bits in NFC_IREQ */
+#define NFC_IREQ_IRQ0 (1 << 0)
+#define NFC_IREQ_IRQ1 (1 << 1)
+#define NFC_IREQ_IRQ2 (1 << 2)
+
+#define NFC_IREQ_FLAG0 (1 << 4)
+#define NFC_IREQ_FLAG1 (1 << 5)
+#define NFC_IREQ_FLAG2 (1 << 6)
+
+/* MMC controller registers */
+#define MMC0_BASE (AHB_PERI_BASE_VIRT + 0xe000)
+#define MMC1_BASE (AHB_PERI_BASE_VIRT + 0xe800)
+
+/* UART base addresses */
+
+#define UART0_BASE (APB0_PERI_BASE_VIRT + 0x07000)
+#define UART0_BASE_PHYS (APB0_PERI_BASE + 0x07000)
+#define UART1_BASE (APB0_PERI_BASE_VIRT + 0x08000)
+#define UART1_BASE_PHYS (APB0_PERI_BASE + 0x08000)
+#define UART2_BASE (APB0_PERI_BASE_VIRT + 0x09000)
+#define UART2_BASE_PHYS (APB0_PERI_BASE + 0x09000)
+#define UART3_BASE (APB0_PERI_BASE_VIRT + 0x0a000)
+#define UART3_BASE_PHYS (APB0_PERI_BASE + 0x0a000)
+#define UART4_BASE (APB0_PERI_BASE_VIRT + 0x15000)
+#define UART4_BASE_PHYS (APB0_PERI_BASE + 0x15000)
+
+#define UART_BASE UART0_BASE
+#define UART_BASE_PHYS UART0_BASE_PHYS
+
+/* ECC controller */
+#define ECC_CTR_BASE (APB0_PERI_BASE_VIRT + 0xd000)
+
+#define ECC_CTRL_OFFS 0x00
+#define ECC_BASE_OFFS 0x04
+#define ECC_MASK_OFFS 0x08
+#define ECC_CLEAR_OFFS 0x0c
+#define ECC4_0_OFFS 0x10
+#define ECC4_1_OFFS 0x14
+
+#define ECC_EADDR0_OFFS 0x50
+
+#define ECC_ERRNUM_OFFS 0x90
+#define ECC_IREQ_OFFS 0x94
+
+/* Bits in ECC_CTRL */
+#define ECC_CTRL_ECC4_DIEN (1 << 28)
+#define ECC_CTRL_ECC8_DIEN (1 << 29)
+#define ECC_CTRL_ECC12_DIEN (1 << 30)
+#define ECC_CTRL_ECC_DISABLE 0x0
+#define ECC_CTRL_ECC_SLC_ENC 0x8
+#define ECC_CTRL_ECC_SLC_DEC 0x9
+#define ECC_CTRL_ECC4_ENC 0xa
+#define ECC_CTRL_ECC4_DEC 0xb
+#define ECC_CTRL_ECC8_ENC 0xc
+#define ECC_CTRL_ECC8_DEC 0xd
+#define ECC_CTRL_ECC12_ENC 0xe
+#define ECC_CTRL_ECC12_DEC 0xf
+
+/* Bits in ECC_IREQ */
+#define ECC_IREQ_E4DI (1 << 4)
+
+#define ECC_IREQ_E4DF (1 << 20)
+#define ECC_IREQ_E4EF (1 << 21)
+
+/* Interrupt controller */
+
+#define PIC0_BASE (APB1_PERI_BASE_VIRT + 0x3000)
+#define PIC0_BASE_PHYS (APB1_PERI_BASE + 0x3000)
+
+#define PIC0_IEN_OFFS 0x00
+#define PIC0_CREQ_OFFS 0x04
+#define PIC0_IREQ_OFFS 0x08
+#define PIC0_IRQSEL_OFFS 0x0c
+#define PIC0_SRC_OFFS 0x10
+#define PIC0_MREQ_OFFS 0x14
+#define PIC0_TSTREQ_OFFS 0x18
+#define PIC0_POL_OFFS 0x1c
+#define PIC0_IRQ_OFFS 0x20
+#define PIC0_FIQ_OFFS 0x24
+#define PIC0_MIRQ_OFFS 0x28
+#define PIC0_MFIQ_OFFS 0x2c
+#define PIC0_TMODE_OFFS 0x30
+#define PIC0_SYNC_OFFS 0x34
+#define PIC0_WKUP_OFFS 0x38
+#define PIC0_TMODEA_OFFS 0x3c
+#define PIC0_INTOEN_OFFS 0x40
+#define PIC0_MEN0_OFFS 0x44
+#define PIC0_MEN_OFFS 0x48
+
+#define PIC0_IEN __REG(PIC0_BASE + PIC0_IEN_OFFS)
+#define PIC0_IEN_PHYS __REG(PIC0_BASE_PHYS + PIC0_IEN_OFFS)
+#define PIC0_CREQ __REG(PIC0_BASE + PIC0_CREQ_OFFS)
+#define PIC0_CREQ_PHYS __REG(PIC0_BASE_PHYS + PIC0_CREQ_OFFS)
+#define PIC0_IREQ __REG(PIC0_BASE + PIC0_IREQ_OFFS)
+#define PIC0_IRQSEL __REG(PIC0_BASE + PIC0_IRQSEL_OFFS)
+#define PIC0_IRQSEL_PHYS __REG(PIC0_BASE_PHYS + PIC0_IRQSEL_OFFS)
+#define PIC0_SRC __REG(PIC0_BASE + PIC0_SRC_OFFS)
+#define PIC0_MREQ __REG(PIC0_BASE + PIC0_MREQ_OFFS)
+#define PIC0_TSTREQ __REG(PIC0_BASE + PIC0_TSTREQ_OFFS)
+#define PIC0_POL __REG(PIC0_BASE + PIC0_POL_OFFS)
+#define PIC0_IRQ __REG(PIC0_BASE + PIC0_IRQ_OFFS)
+#define PIC0_FIQ __REG(PIC0_BASE + PIC0_FIQ_OFFS)
+#define PIC0_MIRQ __REG(PIC0_BASE + PIC0_MIRQ_OFFS)
+#define PIC0_MFIQ __REG(PIC0_BASE + PIC0_MFIQ_OFFS)
+#define PIC0_TMODE __REG(PIC0_BASE + PIC0_TMODE_OFFS)
+#define PIC0_TMODE_PHYS __REG(PIC0_BASE_PHYS + PIC0_TMODE_OFFS)
+#define PIC0_SYNC __REG(PIC0_BASE + PIC0_SYNC_OFFS)
+#define PIC0_WKUP __REG(PIC0_BASE + PIC0_WKUP_OFFS)
+#define PIC0_TMODEA __REG(PIC0_BASE + PIC0_TMODEA_OFFS)
+#define PIC0_INTOEN __REG(PIC0_BASE + PIC0_INTOEN_OFFS)
+#define PIC0_MEN0 __REG(PIC0_BASE + PIC0_MEN0_OFFS)
+#define PIC0_MEN __REG(PIC0_BASE + PIC0_MEN_OFFS)
+
+#define PIC1_BASE (APB1_PERI_BASE_VIRT + 0x3080)
+
+#define PIC1_IEN_OFFS 0x00
+#define PIC1_CREQ_OFFS 0x04
+#define PIC1_IREQ_OFFS 0x08
+#define PIC1_IRQSEL_OFFS 0x0c
+#define PIC1_SRC_OFFS 0x10
+#define PIC1_MREQ_OFFS 0x14
+#define PIC1_TSTREQ_OFFS 0x18
+#define PIC1_POL_OFFS 0x1c
+#define PIC1_IRQ_OFFS 0x20
+#define PIC1_FIQ_OFFS 0x24
+#define PIC1_MIRQ_OFFS 0x28
+#define PIC1_MFIQ_OFFS 0x2c
+#define PIC1_TMODE_OFFS 0x30
+#define PIC1_SYNC_OFFS 0x34
+#define PIC1_WKUP_OFFS 0x38
+#define PIC1_TMODEA_OFFS 0x3c
+#define PIC1_INTOEN_OFFS 0x40
+#define PIC1_MEN1_OFFS 0x44
+#define PIC1_MEN_OFFS 0x48
+
+#define PIC1_IEN __REG(PIC1_BASE + PIC1_IEN_OFFS)
+#define PIC1_CREQ __REG(PIC1_BASE + PIC1_CREQ_OFFS)
+#define PIC1_IREQ __REG(PIC1_BASE + PIC1_IREQ_OFFS)
+#define PIC1_IRQSEL __REG(PIC1_BASE + PIC1_IRQSEL_OFFS)
+#define PIC1_SRC __REG(PIC1_BASE + PIC1_SRC_OFFS)
+#define PIC1_MREQ __REG(PIC1_BASE + PIC1_MREQ_OFFS)
+#define PIC1_TSTREQ __REG(PIC1_BASE + PIC1_TSTREQ_OFFS)
+#define PIC1_POL __REG(PIC1_BASE + PIC1_POL_OFFS)
+#define PIC1_IRQ __REG(PIC1_BASE + PIC1_IRQ_OFFS)
+#define PIC1_FIQ __REG(PIC1_BASE + PIC1_FIQ_OFFS)
+#define PIC1_MIRQ __REG(PIC1_BASE + PIC1_MIRQ_OFFS)
+#define PIC1_MFIQ __REG(PIC1_BASE + PIC1_MFIQ_OFFS)
+#define PIC1_TMODE __REG(PIC1_BASE + PIC1_TMODE_OFFS)
+#define PIC1_SYNC __REG(PIC1_BASE + PIC1_SYNC_OFFS)
+#define PIC1_WKUP __REG(PIC1_BASE + PIC1_WKUP_OFFS)
+#define PIC1_TMODEA __REG(PIC1_BASE + PIC1_TMODEA_OFFS)
+#define PIC1_INTOEN __REG(PIC1_BASE + PIC1_INTOEN_OFFS)
+#define PIC1_MEN1 __REG(PIC1_BASE + PIC1_MEN1_OFFS)
+#define PIC1_MEN __REG(PIC1_BASE + PIC1_MEN_OFFS)
+
+/* Timer registers */
+#define TIMER_BASE (APB1_PERI_BASE_VIRT + 0x4000)
+#define TIMER_BASE_PHYS (APB1_PERI_BASE + 0x4000)
+
+#define TWDCFG_OFFS 0x70
+
+#define TC32EN_OFFS 0x80
+#define TC32LDV_OFFS 0x84
+#define TC32CMP0_OFFS 0x88
+#define TC32CMP1_OFFS 0x8c
+#define TC32PCNT_OFFS 0x90
+#define TC32MCNT_OFFS 0x94
+#define TC32IRQ_OFFS 0x98
+
+/* Bits in TC32EN */
+#define TC32EN_PRESCALE_MASK 0x00ffffff
+#define TC32EN_ENABLE (1 << 24)
+#define TC32EN_LOADZERO (1 << 25)
+#define TC32EN_STOPMODE (1 << 26)
+#define TC32EN_LDM0 (1 << 28)
+#define TC32EN_LDM1 (1 << 29)
+
+/* Bits in TC32IRQ */
+#define TC32IRQ_MSTAT_MASK 0x0000001f
+#define TC32IRQ_RSTAT_MASK (0x1f << 8)
+#define TC32IRQ_IRQEN0 (1 << 16)
+#define TC32IRQ_IRQEN1 (1 << 17)
+#define TC32IRQ_IRQEN2 (1 << 18)
+#define TC32IRQ_IRQEN3 (1 << 19)
+#define TC32IRQ_IRQEN4 (1 << 20)
+#define TC32IRQ_RSYNC (1 << 30)
+#define TC32IRQ_IRQCLR (1 << 31)
+
+/* GPIO registers */
+#define GPIOPD_BASE (APB1_PERI_BASE_VIRT + 0x5000)
+
+#define GPIOPD_DAT_OFFS 0x00
+#define GPIOPD_DOE_OFFS 0x04
+#define GPIOPD_FS0_OFFS 0x08
+#define GPIOPD_FS1_OFFS 0x0c
+#define GPIOPD_FS2_OFFS 0x10
+#define GPIOPD_RPU_OFFS 0x30
+#define GPIOPD_RPD_OFFS 0x34
+#define GPIOPD_DV0_OFFS 0x38
+#define GPIOPD_DV1_OFFS 0x3c
+
+#define GPIOPS_BASE (APB1_PERI_BASE_VIRT + 0x5000)
+
+#define GPIOPS_DAT_OFFS 0x40
+#define GPIOPS_DOE_OFFS 0x44
+#define GPIOPS_FS0_OFFS 0x48
+#define GPIOPS_FS1_OFFS 0x4c
+#define GPIOPS_FS2_OFFS 0x50
+#define GPIOPS_FS3_OFFS 0x54
+#define GPIOPS_RPU_OFFS 0x70
+#define GPIOPS_RPD_OFFS 0x74
+#define GPIOPS_DV0_OFFS 0x78
+#define GPIOPS_DV1_OFFS 0x7c
+
+#define GPIOPS_FS1_SDH0_BITS 0x000000ff
+#define GPIOPS_FS1_SDH1_BITS 0x0000ff00
+
+#define GPIOPU_BASE (APB1_PERI_BASE_VIRT + 0x5000)
+
+#define GPIOPU_DAT_OFFS 0x80
+#define GPIOPU_DOE_OFFS 0x84
+#define GPIOPU_FS0_OFFS 0x88
+#define GPIOPU_FS1_OFFS 0x8c
+#define GPIOPU_FS2_OFFS 0x90
+#define GPIOPU_RPU_OFFS 0xb0
+#define GPIOPU_RPD_OFFS 0xb4
+#define GPIOPU_DV0_OFFS 0xb8
+#define GPIOPU_DV1_OFFS 0xbc
+
+#define GPIOPU_FS0_TXD0 (1 << 0)
+#define GPIOPU_FS0_RXD0 (1 << 1)
+#define GPIOPU_FS0_CTS0 (1 << 2)
+#define GPIOPU_FS0_RTS0 (1 << 3)
+#define GPIOPU_FS0_TXD1 (1 << 4)
+#define GPIOPU_FS0_RXD1 (1 << 5)
+#define GPIOPU_FS0_CTS1 (1 << 6)
+#define GPIOPU_FS0_RTS1 (1 << 7)
+#define GPIOPU_FS0_TXD2 (1 << 8)
+#define GPIOPU_FS0_RXD2 (1 << 9)
+#define GPIOPU_FS0_CTS2 (1 << 10)
+#define GPIOPU_FS0_RTS2 (1 << 11)
+#define GPIOPU_FS0_TXD3 (1 << 12)
+#define GPIOPU_FS0_RXD3 (1 << 13)
+#define GPIOPU_FS0_CTS3 (1 << 14)
+#define GPIOPU_FS0_RTS3 (1 << 15)
+#define GPIOPU_FS0_TXD4 (1 << 16)
+#define GPIOPU_FS0_RXD4 (1 << 17)
+#define GPIOPU_FS0_CTS4 (1 << 18)
+#define GPIOPU_FS0_RTS4 (1 << 19)
+
+#define GPIOFC_BASE (APB1_PERI_BASE_VIRT + 0x5000)
+
+#define GPIOFC_DAT_OFFS 0xc0
+#define GPIOFC_DOE_OFFS 0xc4
+#define GPIOFC_FS0_OFFS 0xc8
+#define GPIOFC_FS1_OFFS 0xcc
+#define GPIOFC_FS2_OFFS 0xd0
+#define GPIOFC_FS3_OFFS 0xd4
+#define GPIOFC_RPU_OFFS 0xf0
+#define GPIOFC_RPD_OFFS 0xf4
+#define GPIOFC_DV0_OFFS 0xf8
+#define GPIOFC_DV1_OFFS 0xfc
+
+#define GPIOFD_BASE (APB1_PERI_BASE_VIRT + 0x5000)
+
+#define GPIOFD_DAT_OFFS 0x100
+#define GPIOFD_DOE_OFFS 0x104
+#define GPIOFD_FS0_OFFS 0x108
+#define GPIOFD_FS1_OFFS 0x10c
+#define GPIOFD_FS2_OFFS 0x110
+#define GPIOFD_RPU_OFFS 0x130
+#define GPIOFD_RPD_OFFS 0x134
+#define GPIOFD_DV0_OFFS 0x138
+#define GPIOFD_DV1_OFFS 0x13c
+
+#define GPIOLC_BASE (APB1_PERI_BASE_VIRT + 0x5000)
+
+#define GPIOLC_DAT_OFFS 0x140
+#define GPIOLC_DOE_OFFS 0x144
+#define GPIOLC_FS0_OFFS 0x148
+#define GPIOLC_FS1_OFFS 0x14c
+#define GPIOLC_RPU_OFFS 0x170
+#define GPIOLC_RPD_OFFS 0x174
+#define GPIOLC_DV0_OFFS 0x178
+#define GPIOLC_DV1_OFFS 0x17c
+
+#define GPIOLD_BASE (APB1_PERI_BASE_VIRT + 0x5000)
+
+#define GPIOLD_DAT_OFFS 0x180
+#define GPIOLD_DOE_OFFS 0x184
+#define GPIOLD_FS0_OFFS 0x188
+#define GPIOLD_FS1_OFFS 0x18c
+#define GPIOLD_FS2_OFFS 0x190
+#define GPIOLD_RPU_OFFS 0x1b0
+#define GPIOLD_RPD_OFFS 0x1b4
+#define GPIOLD_DV0_OFFS 0x1b8
+#define GPIOLD_DV1_OFFS 0x1bc
+
+#define GPIOAD_BASE (APB1_PERI_BASE_VIRT + 0x5000)
+
+#define GPIOAD_DAT_OFFS 0x1c0
+#define GPIOAD_DOE_OFFS 0x1c4
+#define GPIOAD_FS0_OFFS 0x1c8
+#define GPIOAD_RPU_OFFS 0x1f0
+#define GPIOAD_RPD_OFFS 0x1f4
+#define GPIOAD_DV0_OFFS 0x1f8
+#define GPIOAD_DV1_OFFS 0x1fc
+
+#define GPIOXC_BASE (APB1_PERI_BASE_VIRT + 0x5000)
+
+#define GPIOXC_DAT_OFFS 0x200
+#define GPIOXC_DOE_OFFS 0x204
+#define GPIOXC_FS0_OFFS 0x208
+#define GPIOXC_RPU_OFFS 0x230
+#define GPIOXC_RPD_OFFS 0x234
+#define GPIOXC_DV0_OFFS 0x238
+#define GPIOXC_DV1_OFFS 0x23c
+
+#define GPIOXC_FS0 __REG(GPIOXC_BASE + GPIOXC_FS0_OFFS)
+
+#define GPIOXC_FS0_CS0 (1 << 26)
+#define GPIOXC_FS0_CS1 (1 << 27)
+
+#define GPIOXD_BASE (APB1_PERI_BASE_VIRT + 0x5000)
+
+#define GPIOXD_DAT_OFFS 0x240
+#define GPIOXD_FS0_OFFS 0x248
+#define GPIOXD_RPU_OFFS 0x270
+#define GPIOXD_RPD_OFFS 0x274
+#define GPIOXD_DV0_OFFS 0x278
+#define GPIOXD_DV1_OFFS 0x27c
+
+#define GPIOPK_BASE (APB1_PERI_BASE_VIRT + 0x1c000)
+
+#define GPIOPK_RST_OFFS 0x008
+#define GPIOPK_DAT_OFFS 0x100
+#define GPIOPK_DOE_OFFS 0x104
+#define GPIOPK_FS0_OFFS 0x108
+#define GPIOPK_FS1_OFFS 0x10c
+#define GPIOPK_FS2_OFFS 0x110
+#define GPIOPK_IRQST_OFFS 0x210
+#define GPIOPK_IRQEN_OFFS 0x214
+#define GPIOPK_IRQPOL_OFFS 0x218
+#define GPIOPK_IRQTM0_OFFS 0x21c
+#define GPIOPK_IRQTM1_OFFS 0x220
+#define GPIOPK_CTL_OFFS 0x22c
+
+#define PMGPIO_BASE (APB1_PERI_BASE_VIRT + 0x10000)
+#define BACKUP_RAM_BASE PMGPIO_BASE
+
+#define PMGPIO_DAT_OFFS 0x800
+#define PMGPIO_DOE_OFFS 0x804
+#define PMGPIO_FS0_OFFS 0x808
+#define PMGPIO_RPU_OFFS 0x810
+#define PMGPIO_RPD_OFFS 0x814
+#define PMGPIO_DV0_OFFS 0x818
+#define PMGPIO_DV1_OFFS 0x81c
+#define PMGPIO_EE0_OFFS 0x820
+#define PMGPIO_EE1_OFFS 0x824
+#define PMGPIO_CTL_OFFS 0x828
+#define PMGPIO_DI_OFFS 0x82c
+#define PMGPIO_STR_OFFS 0x830
+#define PMGPIO_STF_OFFS 0x834
+#define PMGPIO_POL_OFFS 0x838
+#define PMGPIO_APB_OFFS 0x800
+
+/* Clock controller registers */
+#define CKC_BASE ((void __iomem *)(APB1_PERI_BASE_VIRT + 0x6000))
+
+#define CLKCTRL_OFFS 0x00
+#define PLL0CFG_OFFS 0x04
+#define PLL1CFG_OFFS 0x08
+#define CLKDIVC0_OFFS 0x0c
+
+#define BCLKCTR0_OFFS 0x14
+#define SWRESET0_OFFS 0x18
+
+#define BCLKCTR1_OFFS 0x60
+#define SWRESET1_OFFS 0x64
+#define PWDCTL_OFFS 0x68
+#define PLL2CFG_OFFS 0x6c
+#define CLKDIVC1_OFFS 0x70
+
+#define ACLKREF_OFFS 0x80
+#define ACLKI2C_OFFS 0x84
+#define ACLKSPI0_OFFS 0x88
+#define ACLKSPI1_OFFS 0x8c
+#define ACLKUART0_OFFS 0x90
+#define ACLKUART1_OFFS 0x94
+#define ACLKUART2_OFFS 0x98
+#define ACLKUART3_OFFS 0x9c
+#define ACLKUART4_OFFS 0xa0
+#define ACLKTCT_OFFS 0xa4
+#define ACLKTCX_OFFS 0xa8
+#define ACLKTCZ_OFFS 0xac
+#define ACLKADC_OFFS 0xb0
+#define ACLKDAI0_OFFS 0xb4
+#define ACLKDAI1_OFFS 0xb8
+#define ACLKLCD_OFFS 0xbc
+#define ACLKSPDIF_OFFS 0xc0
+#define ACLKUSBH_OFFS 0xc4
+#define ACLKSDH0_OFFS 0xc8
+#define ACLKSDH1_OFFS 0xcc
+#define ACLKC3DEC_OFFS 0xd0
+#define ACLKEXT_OFFS 0xd4
+#define ACLKCAN0_OFFS 0xd8
+#define ACLKCAN1_OFFS 0xdc
+#define ACLKGSB0_OFFS 0xe0
+#define ACLKGSB1_OFFS 0xe4
+#define ACLKGSB2_OFFS 0xe8
+#define ACLKGSB3_OFFS 0xec
+
+#define PLLxCFG_PD (1 << 31)
+
+/* CLKCTRL bits */
+#define CLKCTRL_XE (1 << 31)
+
+/* CLKDIVCx bits */
+#define CLKDIVC0_XTE (1 << 7)
+#define CLKDIVC0_XE (1 << 15)
+#define CLKDIVC0_P1E (1 << 23)
+#define CLKDIVC0_P0E (1 << 31)
+
+#define CLKDIVC1_P2E (1 << 7)
+
+/* BCLKCTR0 clock bits */
+#define BCLKCTR0_USBD (1 << 4)
+#define BCLKCTR0_ECC (1 << 9)
+#define BCLKCTR0_USBH0 (1 << 11)
+#define BCLKCTR0_NFC (1 << 16)
+
+/* BCLKCTR1 clock bits */
+#define BCLKCTR1_USBH1 (1 << 20)
+
+/* SWRESET0 bits */
+#define SWRESET0_USBD (1 << 4)
+#define SWRESET0_USBH0 (1 << 11)
+
+/* SWRESET1 bits */
+#define SWRESET1_USBH1 (1 << 20)
+
+/* System clock sources.
+ * Note: These are the clock sources that serve as parents for
+ * all other clocks. They have no parents themselves.
+ *
+ * These values are used for struct clk->root_id. All clocks
+ * that are not system clock sources have this value set to
+ * CLK_SRC_NOROOT.
+ * The values for system clocks start with CLK_SRC_PLL0 == 0
+ * because this gives us exactly the values needed for the lower
+ * 4 bits of ACLK_* registers. Therefore, CLK_SRC_NOROOT is
+ * defined as -1 to not disturb the order.
+ */
+enum root_clks {
+ CLK_SRC_NOROOT = -1,
+ CLK_SRC_PLL0 = 0,
+ CLK_SRC_PLL1,
+ CLK_SRC_PLL0DIV,
+ CLK_SRC_PLL1DIV,
+ CLK_SRC_XI,
+ CLK_SRC_XIDIV,
+ CLK_SRC_XTI,
+ CLK_SRC_XTIDIV,
+ CLK_SRC_PLL2,
+ CLK_SRC_PLL2DIV,
+ CLK_SRC_PK0,
+ CLK_SRC_PK1,
+ CLK_SRC_PK2,
+ CLK_SRC_PK3,
+ CLK_SRC_PK4,
+ CLK_SRC_48MHZ
+};
+
+#define CLK_SRC_MASK 0xf
+
+/* Bits in ACLK* registers */
+#define ACLK_EN (1 << 28)
+#define ACLK_SEL_SHIFT 24
+#define ACLK_SEL_MASK 0x0f000000
+#define ACLK_DIV_MASK 0x00000fff
+
+/* System configuration registers */
+
+#define SCFG_BASE (APB1_PERI_BASE_VIRT + 0x13000)
+
+#define BMI_OFFS 0x00
+#define AHBCON0_OFFS 0x04
+#define APBPWE_OFFS 0x08
+#define DTCMWAIT_OFFS 0x0c
+#define ECCSEL_OFFS 0x10
+#define AHBCON1_OFFS 0x14
+#define SDHCFG_OFFS 0x18
+#define REMAP_OFFS 0x20
+#define LCDSIAE_OFFS 0x24
+#define XMCCFG_OFFS 0xe0
+#define IMCCFG_OFFS 0xe4
+
+/* Values for ECCSEL */
+#define ECCSEL_EXTMEM 0x0
+#define ECCSEL_DTCM 0x1
+#define ECCSEL_INT_SRAM 0x2
+#define ECCSEL_AHB 0x3
+
+/* Bits in XMCCFG */
+#define XMCCFG_NFCE (1 << 1)
+#define XMCCFG_FDXD (1 << 2)
+
+/* External memory controller registers */
+
+#define EMC_BASE EXT_MEM_CTRL_BASE
+
+#define SDCFG_OFFS 0x00
+#define SDFSM_OFFS 0x04
+#define MCFG_OFFS 0x08
+
+#define CSCFG0_OFFS 0x10
+#define CSCFG1_OFFS 0x14
+#define CSCFG2_OFFS 0x18
+#define CSCFG3_OFFS 0x1c
+
+#define MCFG_SDEN (1 << 4)
+
+#endif /* TCC8K_REGS_H */
diff --git a/arch/arm/plat-tcc/include/mach/timex.h b/arch/arm/plat-tcc/include/mach/timex.h
new file mode 100644
index 0000000..057acbe
--- /dev/null
+++ b/arch/arm/plat-tcc/include/mach/timex.h
@@ -0,0 +1,5 @@
+/*
+ * A definition needed by arch core code.
+ *
+ */
+#define CLOCK_TICK_RATE (HZ * 100000UL)
diff --git a/arch/arm/plat-tcc/include/mach/uncompress.h b/arch/arm/plat-tcc/include/mach/uncompress.h
new file mode 100644
index 0000000..7a3e33a
--- /dev/null
+++ b/arch/arm/plat-tcc/include/mach/uncompress.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
+ *
+ * This file is licensed under the terms of the GPL version 2.
+ */
+
+#include <linux/serial_reg.h>
+#include <linux/types.h>
+
+#include <mach/tcc8k-regs.h>
+
+unsigned int system_rev;
+
+#define ID_MASK 0x7fff
+
+static void putc(int c)
+{
+ u32 *uart_lsr = (u32 *)(UART_BASE_PHYS + (UART_LSR << 2));
+ u32 *uart_tx = (u32 *)(UART_BASE_PHYS + (UART_TX << 2));
+
+ while (!(*uart_lsr & UART_LSR_THRE))
+ barrier();
+ *uart_tx = c;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/plat-tcc/include/mach/vmalloc.h b/arch/arm/plat-tcc/include/mach/vmalloc.h
new file mode 100644
index 0000000..99414d9
--- /dev/null
+++ b/arch/arm/plat-tcc/include/mach/vmalloc.h
@@ -0,0 +1,10 @@
+/*
+ * Author: <linux@telechips.com>
+ * Created: June 10, 2008
+ *
+ * Copyright (C) 2000 Russell King.
+ * Copyright (C) 2008-2009 Telechips
+ *
+ * Licensed under the terms of the GPL v2.
+ */
+#define VMALLOC_END 0xf0000000UL
diff --git a/arch/arm/plat-tcc/system.c b/arch/arm/plat-tcc/system.c
new file mode 100644
index 0000000..cc208fa
--- /dev/null
+++ b/arch/arm/plat-tcc/system.c
@@ -0,0 +1,25 @@
+/*
+ * System functions for Telechips TCCxxxx SoCs
+ *
+ * Copyright (C) Hans J. Koch <hjk@linutronix.de>
+ *
+ * Licensed under the terms of the GPL v2.
+ *
+ */
+
+#include <linux/io.h>
+
+#include <mach/tcc8k-regs.h>
+
+/* System reboot */
+void plat_tcc_reboot(void)
+{
+ /* Make sure clocks are on */
+ __raw_writel(0xffffffff, CKC_BASE + BCLKCTR0_OFFS);
+
+ /* Enable watchdog reset */
+ __raw_writel(0x49, TIMER_BASE + TWDCFG_OFFS);
+ /* Wait for reset */
+ while(1)
+ ;
+}
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index f515727..9ac8725 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -90,6 +90,7 @@
select ARCH_REQUIRE_GPIOLIB
select GENERIC_ALLOCATOR
select HAVE_FB_ATMEL
+ select HAVE_NET_MACB
#
# CPU types
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 9cc488d2..aa037fe 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -338,7 +338,7 @@
config KEYBOARD_PXA27x
tristate "PXA27x/PXA3xx keypad support"
- depends on PXA27x || PXA3xx
+ depends on PXA27x || PXA3xx || ARCH_MMP
help
Enable support for PXA27x/PXA3xx keypad controller.
diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c
index f32404f..4b0ec35 100644
--- a/drivers/input/keyboard/pxa27x_keypad.c
+++ b/drivers/input/keyboard/pxa27x_keypad.c
@@ -32,7 +32,7 @@
#include <asm/mach/map.h>
#include <mach/hardware.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
/*
* Keypad Controller registers
*/
@@ -330,11 +330,21 @@
keypad->direct_key_state = new_state;
}
+static void clear_wakeup_event(struct pxa27x_keypad *keypad)
+{
+ struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
+
+ if (pdata->clear_wakeup_event)
+ (pdata->clear_wakeup_event)();
+}
+
static irqreturn_t pxa27x_keypad_irq_handler(int irq, void *dev_id)
{
struct pxa27x_keypad *keypad = dev_id;
unsigned long kpc = keypad_readl(KPC);
+ clear_wakeup_event(keypad);
+
if (kpc & KPC_DI)
pxa27x_keypad_scan_direct(keypad);
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index e411262..cc2a88d 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -304,13 +304,22 @@
config LEDS_NS2
tristate "LED support for Network Space v2 GPIO LEDs"
- depends on MACH_NETSPACE_V2 || MACH_INETSPACE_V2 || MACH_NETSPACE_MAX_V2
+ depends on MACH_NETSPACE_V2 || MACH_INETSPACE_V2 || MACH_NETSPACE_MAX_V2 || D2NET_V2
default y
help
This option enable support for the dual-GPIO LED found on the
Network Space v2 board (and parents). This include Internet Space v2,
Network Space (Max) v2 and d2 Network v2 boards.
+config LEDS_NETXBIG
+ tristate "LED support for Big Network series LEDs"
+ depends on MACH_NET2BIG_V2 || MACH_NET5BIG_V2
+ default y
+ help
+ This option enable support for LEDs found on the LaCie 2Big
+ and 5Big Network v2 boards. The LEDs are wired to a CPLD and are
+ controlled through a GPIO extension bus.
+
config LEDS_TRIGGERS
bool "LED Trigger support"
help
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 7d6b958..9c96db4 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -38,6 +38,7 @@
obj-$(CONFIG_LEDS_DELL_NETBOOKS) += dell-led.o
obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o
obj-$(CONFIG_LEDS_NS2) += leds-ns2.o
+obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o
# LED SPI Drivers
obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
diff --git a/drivers/leds/leds-netxbig.c b/drivers/leds/leds-netxbig.c
new file mode 100644
index 0000000..f2e51c1
--- /dev/null
+++ b/drivers/leds/leds-netxbig.c
@@ -0,0 +1,449 @@
+/*
+ * leds-netxbig.c - Driver for the 2Big and 5Big Network series LEDs
+ *
+ * Copyright (C) 2010 LaCie
+ *
+ * Author: Simon Guinot <sguinot@lacie.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <mach/leds-netxbig.h>
+
+/*
+ * GPIO extension bus.
+ */
+
+static DEFINE_SPINLOCK(gpio_ext_lock);
+
+static void gpio_ext_set_addr(struct netxbig_gpio_ext *gpio_ext, int addr)
+{
+ int pin;
+
+ for (pin = 0; pin < gpio_ext->num_addr; pin++)
+ gpio_set_value(gpio_ext->addr[pin], (addr >> pin) & 1);
+}
+
+static void gpio_ext_set_data(struct netxbig_gpio_ext *gpio_ext, int data)
+{
+ int pin;
+
+ for (pin = 0; pin < gpio_ext->num_data; pin++)
+ gpio_set_value(gpio_ext->data[pin], (data >> pin) & 1);
+}
+
+static void gpio_ext_enable_select(struct netxbig_gpio_ext *gpio_ext)
+{
+ /* Enable select is done on the raising edge. */
+ gpio_set_value(gpio_ext->enable, 0);
+ gpio_set_value(gpio_ext->enable, 1);
+}
+
+static void gpio_ext_set_value(struct netxbig_gpio_ext *gpio_ext,
+ int addr, int value)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&gpio_ext_lock, flags);
+ gpio_ext_set_addr(gpio_ext, addr);
+ gpio_ext_set_data(gpio_ext, value);
+ gpio_ext_enable_select(gpio_ext);
+ spin_unlock_irqrestore(&gpio_ext_lock, flags);
+}
+
+static int __devinit gpio_ext_init(struct netxbig_gpio_ext *gpio_ext)
+{
+ int err;
+ int i;
+
+ if (unlikely(!gpio_ext))
+ return -EINVAL;
+
+ /* Configure address GPIOs. */
+ for (i = 0; i < gpio_ext->num_addr; i++) {
+ err = gpio_request(gpio_ext->addr[i], "GPIO extension addr");
+ if (err)
+ goto err_free_addr;
+ err = gpio_direction_output(gpio_ext->addr[i], 0);
+ if (err) {
+ gpio_free(gpio_ext->addr[i]);
+ goto err_free_addr;
+ }
+ }
+ /* Configure data GPIOs. */
+ for (i = 0; i < gpio_ext->num_data; i++) {
+ err = gpio_request(gpio_ext->data[i], "GPIO extension data");
+ if (err)
+ goto err_free_data;
+ err = gpio_direction_output(gpio_ext->data[i], 0);
+ if (err) {
+ gpio_free(gpio_ext->data[i]);
+ goto err_free_data;
+ }
+ }
+ /* Configure "enable select" GPIO. */
+ err = gpio_request(gpio_ext->enable, "GPIO extension enable");
+ if (err)
+ goto err_free_data;
+ err = gpio_direction_output(gpio_ext->enable, 0);
+ if (err) {
+ gpio_free(gpio_ext->enable);
+ goto err_free_data;
+ }
+
+ return 0;
+
+err_free_data:
+ for (i = i - 1; i >= 0; i--)
+ gpio_free(gpio_ext->data[i]);
+ i = gpio_ext->num_addr;
+err_free_addr:
+ for (i = i - 1; i >= 0; i--)
+ gpio_free(gpio_ext->addr[i]);
+
+ return err;
+}
+
+static void __devexit gpio_ext_free(struct netxbig_gpio_ext *gpio_ext)
+{
+ int i;
+
+ gpio_free(gpio_ext->enable);
+ for (i = gpio_ext->num_addr - 1; i >= 0; i--)
+ gpio_free(gpio_ext->addr[i]);
+ for (i = gpio_ext->num_data - 1; i >= 0; i--)
+ gpio_free(gpio_ext->data[i]);
+}
+
+/*
+ * Class LED driver.
+ */
+
+struct netxbig_led_data {
+ struct netxbig_gpio_ext *gpio_ext;
+ struct led_classdev cdev;
+ int mode_addr;
+ int *mode_val;
+ int bright_addr;
+ int bright_max;
+ struct netxbig_led_timer *timer;
+ int num_timer;
+ enum netxbig_led_mode mode;
+ int sata;
+ spinlock_t lock;
+};
+
+static int netxbig_led_get_timer_mode(enum netxbig_led_mode *mode,
+ unsigned long delay_on,
+ unsigned long delay_off,
+ struct netxbig_led_timer *timer,
+ int num_timer)
+{
+ int i;
+
+ for (i = 0; i < num_timer; i++) {
+ if (timer[i].delay_on == delay_on &&
+ timer[i].delay_off == delay_off) {
+ *mode = timer[i].mode;
+ return 0;
+ }
+ }
+ return -EINVAL;
+}
+
+static int netxbig_led_blink_set(struct led_classdev *led_cdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ struct netxbig_led_data *led_dat =
+ container_of(led_cdev, struct netxbig_led_data, cdev);
+ enum netxbig_led_mode mode;
+ int mode_val;
+ int ret;
+
+ /* Look for a LED mode with the requested timer frequency. */
+ ret = netxbig_led_get_timer_mode(&mode, *delay_on, *delay_off,
+ led_dat->timer, led_dat->num_timer);
+ if (ret < 0)
+ return ret;
+
+ mode_val = led_dat->mode_val[mode];
+ if (mode_val == NETXBIG_LED_INVALID_MODE)
+ return -EINVAL;
+
+ spin_lock_irq(&led_dat->lock);
+
+ gpio_ext_set_value(led_dat->gpio_ext, led_dat->mode_addr, mode_val);
+ led_dat->mode = mode;
+
+ spin_unlock_irq(&led_dat->lock);
+
+ return 0;
+}
+
+static void netxbig_led_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct netxbig_led_data *led_dat =
+ container_of(led_cdev, struct netxbig_led_data, cdev);
+ enum netxbig_led_mode mode;
+ int mode_val, bright_val;
+ int set_brightness = 1;
+ unsigned long flags;
+
+ spin_lock_irqsave(&led_dat->lock, flags);
+
+ if (value == LED_OFF) {
+ mode = NETXBIG_LED_OFF;
+ set_brightness = 0;
+ } else {
+ if (led_dat->sata)
+ mode = NETXBIG_LED_SATA;
+ else if (led_dat->mode == NETXBIG_LED_OFF)
+ mode = NETXBIG_LED_ON;
+ else /* Keep 'timer' mode. */
+ mode = led_dat->mode;
+ }
+ mode_val = led_dat->mode_val[mode];
+
+ gpio_ext_set_value(led_dat->gpio_ext, led_dat->mode_addr, mode_val);
+ led_dat->mode = mode;
+ /*
+ * Note that the brightness register is shared between all the
+ * SATA LEDs. So, change the brightness setting for a single
+ * SATA LED will affect all the others.
+ */
+ if (set_brightness) {
+ bright_val = DIV_ROUND_UP(value * led_dat->bright_max,
+ LED_FULL);
+ gpio_ext_set_value(led_dat->gpio_ext,
+ led_dat->bright_addr, bright_val);
+ }
+
+ spin_unlock_irqrestore(&led_dat->lock, flags);
+}
+
+static ssize_t netxbig_led_sata_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buff, size_t count)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct netxbig_led_data *led_dat =
+ container_of(led_cdev, struct netxbig_led_data, cdev);
+ unsigned long enable;
+ enum netxbig_led_mode mode;
+ int mode_val;
+ int ret;
+
+ ret = strict_strtoul(buff, 10, &enable);
+ if (ret < 0)
+ return ret;
+
+ enable = !!enable;
+
+ spin_lock_irq(&led_dat->lock);
+
+ if (led_dat->sata == enable) {
+ ret = count;
+ goto exit_unlock;
+ }
+
+ if (led_dat->mode != NETXBIG_LED_ON &&
+ led_dat->mode != NETXBIG_LED_SATA)
+ mode = led_dat->mode; /* Keep modes 'off' and 'timer'. */
+ else if (enable)
+ mode = NETXBIG_LED_SATA;
+ else
+ mode = NETXBIG_LED_ON;
+
+ mode_val = led_dat->mode_val[mode];
+ if (mode_val == NETXBIG_LED_INVALID_MODE) {
+ ret = -EINVAL;
+ goto exit_unlock;
+ }
+
+ gpio_ext_set_value(led_dat->gpio_ext, led_dat->mode_addr, mode_val);
+ led_dat->mode = mode;
+ led_dat->sata = enable;
+
+ ret = count;
+
+exit_unlock:
+ spin_unlock_irq(&led_dat->lock);
+
+ return ret;
+}
+
+static ssize_t netxbig_led_sata_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct netxbig_led_data *led_dat =
+ container_of(led_cdev, struct netxbig_led_data, cdev);
+
+ return sprintf(buf, "%d\n", led_dat->sata);
+}
+
+static DEVICE_ATTR(sata, 0644, netxbig_led_sata_show, netxbig_led_sata_store);
+
+static void __devexit delete_netxbig_led(struct netxbig_led_data *led_dat)
+{
+ if (led_dat->mode_val[NETXBIG_LED_SATA] != NETXBIG_LED_INVALID_MODE)
+ device_remove_file(led_dat->cdev.dev, &dev_attr_sata);
+ led_classdev_unregister(&led_dat->cdev);
+}
+
+static int __devinit
+create_netxbig_led(struct platform_device *pdev,
+ struct netxbig_led_data *led_dat,
+ const struct netxbig_led *template)
+{
+ struct netxbig_led_platform_data *pdata = pdev->dev.platform_data;
+ int ret;
+
+ spin_lock_init(&led_dat->lock);
+ led_dat->gpio_ext = pdata->gpio_ext;
+ led_dat->cdev.name = template->name;
+ led_dat->cdev.default_trigger = template->default_trigger;
+ led_dat->cdev.blink_set = netxbig_led_blink_set;
+ led_dat->cdev.brightness_set = netxbig_led_set;
+ /*
+ * Because the GPIO extension bus don't allow to read registers
+ * value, there is no way to probe the LED initial state.
+ * So, the initial sysfs LED value for the "brightness" and "sata"
+ * attributes are inconsistent.
+ *
+ * Note that the initial LED state can't be reconfigured.
+ * The reason is that the LED behaviour must stay uniform during
+ * the whole boot process (bootloader+linux).
+ */
+ led_dat->sata = 0;
+ led_dat->cdev.brightness = LED_OFF;
+ led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
+ led_dat->mode_addr = template->mode_addr;
+ led_dat->mode_val = template->mode_val;
+ led_dat->bright_addr = template->bright_addr;
+ led_dat->bright_max = (1 << pdata->gpio_ext->num_data) - 1;
+ led_dat->timer = pdata->timer;
+ led_dat->num_timer = pdata->num_timer;
+
+ ret = led_classdev_register(&pdev->dev, &led_dat->cdev);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * If available, expose the SATA activity blink capability through
+ * a "sata" sysfs attribute.
+ */
+ if (led_dat->mode_val[NETXBIG_LED_SATA] != NETXBIG_LED_INVALID_MODE) {
+ ret = device_create_file(led_dat->cdev.dev, &dev_attr_sata);
+ if (ret)
+ led_classdev_unregister(&led_dat->cdev);
+ }
+
+ return ret;
+}
+
+static int __devinit netxbig_led_probe(struct platform_device *pdev)
+{
+ struct netxbig_led_platform_data *pdata = pdev->dev.platform_data;
+ struct netxbig_led_data *leds_data;
+ int i;
+ int ret;
+
+ if (!pdata)
+ return -EINVAL;
+
+ leds_data = kzalloc(sizeof(struct netxbig_led_data) * pdata->num_leds,
+ GFP_KERNEL);
+ if (!leds_data)
+ return -ENOMEM;
+
+ ret = gpio_ext_init(pdata->gpio_ext);
+ if (ret < 0)
+ goto err_free_data;
+
+ for (i = 0; i < pdata->num_leds; i++) {
+ ret = create_netxbig_led(pdev, &leds_data[i], &pdata->leds[i]);
+ if (ret < 0)
+ goto err_free_leds;
+ }
+
+ platform_set_drvdata(pdev, leds_data);
+
+ return 0;
+
+err_free_leds:
+ for (i = i - 1; i >= 0; i--)
+ delete_netxbig_led(&leds_data[i]);
+
+ gpio_ext_free(pdata->gpio_ext);
+err_free_data:
+ kfree(leds_data);
+
+ return ret;
+}
+
+static int __devexit netxbig_led_remove(struct platform_device *pdev)
+{
+ struct netxbig_led_platform_data *pdata = pdev->dev.platform_data;
+ struct netxbig_led_data *leds_data;
+ int i;
+
+ leds_data = platform_get_drvdata(pdev);
+
+ for (i = 0; i < pdata->num_leds; i++)
+ delete_netxbig_led(&leds_data[i]);
+
+ gpio_ext_free(pdata->gpio_ext);
+ kfree(leds_data);
+
+ return 0;
+}
+
+static struct platform_driver netxbig_led_driver = {
+ .probe = netxbig_led_probe,
+ .remove = __devexit_p(netxbig_led_remove),
+ .driver = {
+ .name = "leds-netxbig",
+ .owner = THIS_MODULE,
+ },
+};
+MODULE_ALIAS("platform:leds-netxbig");
+
+static int __init netxbig_led_init(void)
+{
+ return platform_driver_register(&netxbig_led_driver);
+}
+
+static void __exit netxbig_led_exit(void)
+{
+ platform_driver_unregister(&netxbig_led_driver);
+}
+
+module_init(netxbig_led_init);
+module_exit(netxbig_led_exit);
+
+MODULE_AUTHOR("Simon Guinot <sguinot@lacie.com>");
+MODULE_DESCRIPTION("LED driver for LaCie xBig Network boards");
+MODULE_LICENSE("GPL");
diff --git a/drivers/leds/leds-ns2.c b/drivers/leds/leds-ns2.c
index 350eb34..f77d48d 100644
--- a/drivers/leds/leds-ns2.c
+++ b/drivers/leds/leds-ns2.c
@@ -141,10 +141,12 @@
struct device_attribute *attr,
const char *buff, size_t count)
{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct ns2_led_data *led_dat =
+ container_of(led_cdev, struct ns2_led_data, cdev);
int ret;
unsigned long enable;
enum ns2_led_modes mode;
- struct ns2_led_data *led_dat = dev_get_drvdata(dev);
ret = strict_strtoul(buff, 10, &enable);
if (ret < 0)
@@ -172,7 +174,9 @@
static ssize_t ns2_led_sata_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct ns2_led_data *led_dat = dev_get_drvdata(dev);
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct ns2_led_data *led_dat =
+ container_of(led_cdev, struct ns2_led_data, cdev);
return sprintf(buf, "%d\n", led_dat->sata);
}
@@ -234,7 +238,6 @@
if (ret < 0)
goto err_free_slow;
- dev_set_drvdata(led_dat->cdev.dev, led_dat);
ret = device_create_file(led_dat->cdev.dev, &dev_attr_sata);
if (ret < 0)
goto err_free_cdev;
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 5db667c..77efe46 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2,6 +2,9 @@
# Network device configuration
#
+config HAVE_NET_MACB
+ bool
+
menuconfig NETDEVICES
default y if UML
depends on NET
@@ -221,7 +224,7 @@
config MACB
tristate "Atmel MACB support"
- depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91SAM9G20 || ARCH_AT91SAM9G45 || ARCH_AT91CAP9
+ depends on HAVE_NET_MACB
select PHYLIB
help
The Atmel MACB ethernet interface is found on many AT32 and AT91
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 91c2f4f..7e631fa 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -143,10 +143,26 @@
GPIO operations, you should be able to leverage that for better
speed with a custom version of this driver; see the source code.
+config SPI_IMX_VER_IMX1
+ def_bool y if SOC_IMX1
+
+config SPI_IMX_VER_0_0
+ def_bool y if SOC_IMX21 || SOC_IMX27
+
+config SPI_IMX_VER_0_4
+ def_bool y if ARCH_MX31
+
+config SPI_IMX_VER_0_7
+ def_bool y if ARCH_MX25 || ARCH_MX35 || ARCH_MX51
+
+config SPI_IMX_VER_2_3
+ def_bool y if ARCH_MX51
+
config SPI_IMX
tristate "Freescale i.MX SPI controllers"
depends on ARCH_MXC
select SPI_BITBANG
+ default m if IMX_HAVE_PLATFORM_SPI_IMX
help
This enables using the Freescale i.MX SPI controllers in master
mode.
diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c
index 7972e90..55a38e2 100644
--- a/drivers/spi/spi_imx.c
+++ b/drivers/spi/spi_imx.c
@@ -56,7 +56,28 @@
unsigned int speed_hz;
unsigned int bpw;
unsigned int mode;
- int cs;
+ u8 cs;
+};
+
+enum spi_imx_devtype {
+ SPI_IMX_VER_IMX1,
+ SPI_IMX_VER_0_0,
+ SPI_IMX_VER_0_4,
+ SPI_IMX_VER_0_5,
+ SPI_IMX_VER_0_7,
+ SPI_IMX_VER_2_3,
+ SPI_IMX_VER_AUTODETECT,
+};
+
+struct spi_imx_data;
+
+struct spi_imx_devtype_data {
+ void (*intctrl)(struct spi_imx_data *, int);
+ int (*config)(struct spi_imx_data *, struct spi_imx_config *);
+ void (*trigger)(struct spi_imx_data *);
+ int (*rx_available)(struct spi_imx_data *);
+ void (*reset)(struct spi_imx_data *);
+ unsigned int fifosize;
};
struct spi_imx_data {
@@ -76,11 +97,7 @@
const void *tx_buf;
unsigned int txfifo; /* number of words pushed in tx FIFO */
- /* SoC specific functions */
- void (*intctrl)(struct spi_imx_data *, int);
- int (*config)(struct spi_imx_data *, struct spi_imx_config *);
- void (*trigger)(struct spi_imx_data *);
- int (*rx_available)(struct spi_imx_data *);
+ struct spi_imx_devtype_data devtype_data;
};
#define MXC_SPI_BUF_RX(type) \
@@ -140,7 +157,7 @@
return max;
}
-/* MX1, MX31, MX35 */
+/* MX1, MX31, MX35, MX51 CSPI */
static unsigned int spi_imx_clkdiv_2(unsigned int fin,
unsigned int fspi)
{
@@ -155,6 +172,128 @@
return 7;
}
+#define SPI_IMX2_3_CTRL 0x08
+#define SPI_IMX2_3_CTRL_ENABLE (1 << 0)
+#define SPI_IMX2_3_CTRL_XCH (1 << 2)
+#define SPI_IMX2_3_CTRL_MODE(cs) (1 << ((cs) + 4))
+#define SPI_IMX2_3_CTRL_POSTDIV_OFFSET 8
+#define SPI_IMX2_3_CTRL_PREDIV_OFFSET 12
+#define SPI_IMX2_3_CTRL_CS(cs) ((cs) << 18)
+#define SPI_IMX2_3_CTRL_BL_OFFSET 20
+
+#define SPI_IMX2_3_CONFIG 0x0c
+#define SPI_IMX2_3_CONFIG_SCLKPHA(cs) (1 << ((cs) + 0))
+#define SPI_IMX2_3_CONFIG_SCLKPOL(cs) (1 << ((cs) + 4))
+#define SPI_IMX2_3_CONFIG_SBBCTRL(cs) (1 << ((cs) + 8))
+#define SPI_IMX2_3_CONFIG_SSBPOL(cs) (1 << ((cs) + 12))
+
+#define SPI_IMX2_3_INT 0x10
+#define SPI_IMX2_3_INT_TEEN (1 << 0)
+#define SPI_IMX2_3_INT_RREN (1 << 3)
+
+#define SPI_IMX2_3_STAT 0x18
+#define SPI_IMX2_3_STAT_RR (1 << 3)
+
+/* MX51 eCSPI */
+static unsigned int spi_imx2_3_clkdiv(unsigned int fin, unsigned int fspi)
+{
+ /*
+ * there are two 4-bit dividers, the pre-divider divides by
+ * $pre, the post-divider by 2^$post
+ */
+ unsigned int pre, post;
+
+ if (unlikely(fspi > fin))
+ return 0;
+
+ post = fls(fin) - fls(fspi);
+ if (fin > fspi << post)
+ post++;
+
+ /* now we have: (fin <= fspi << post) with post being minimal */
+
+ post = max(4U, post) - 4;
+ if (unlikely(post > 0xf)) {
+ pr_err("%s: cannot set clock freq: %u (base freq: %u)\n",
+ __func__, fspi, fin);
+ return 0xff;
+ }
+
+ pre = DIV_ROUND_UP(fin, fspi << post) - 1;
+
+ pr_debug("%s: fin: %u, fspi: %u, post: %u, pre: %u\n",
+ __func__, fin, fspi, post, pre);
+ return (pre << SPI_IMX2_3_CTRL_PREDIV_OFFSET) |
+ (post << SPI_IMX2_3_CTRL_POSTDIV_OFFSET);
+}
+
+static void __maybe_unused spi_imx2_3_intctrl(struct spi_imx_data *spi_imx, int enable)
+{
+ unsigned val = 0;
+
+ if (enable & MXC_INT_TE)
+ val |= SPI_IMX2_3_INT_TEEN;
+
+ if (enable & MXC_INT_RR)
+ val |= SPI_IMX2_3_INT_RREN;
+
+ writel(val, spi_imx->base + SPI_IMX2_3_INT);
+}
+
+static void __maybe_unused spi_imx2_3_trigger(struct spi_imx_data *spi_imx)
+{
+ u32 reg;
+
+ reg = readl(spi_imx->base + SPI_IMX2_3_CTRL);
+ reg |= SPI_IMX2_3_CTRL_XCH;
+ writel(reg, spi_imx->base + SPI_IMX2_3_CTRL);
+}
+
+static int __maybe_unused spi_imx2_3_config(struct spi_imx_data *spi_imx,
+ struct spi_imx_config *config)
+{
+ u32 ctrl = SPI_IMX2_3_CTRL_ENABLE, cfg = 0;
+
+ /* set master mode */
+ ctrl |= SPI_IMX2_3_CTRL_MODE(config->cs);
+
+ /* set clock speed */
+ ctrl |= spi_imx2_3_clkdiv(spi_imx->spi_clk, config->speed_hz);
+
+ /* set chip select to use */
+ ctrl |= SPI_IMX2_3_CTRL_CS(config->cs);
+
+ ctrl |= (config->bpw - 1) << SPI_IMX2_3_CTRL_BL_OFFSET;
+
+ cfg |= SPI_IMX2_3_CONFIG_SBBCTRL(config->cs);
+
+ if (config->mode & SPI_CPHA)
+ cfg |= SPI_IMX2_3_CONFIG_SCLKPHA(config->cs);
+
+ if (config->mode & SPI_CPOL)
+ cfg |= SPI_IMX2_3_CONFIG_SCLKPOL(config->cs);
+
+ if (config->mode & SPI_CS_HIGH)
+ cfg |= SPI_IMX2_3_CONFIG_SSBPOL(config->cs);
+
+ writel(ctrl, spi_imx->base + SPI_IMX2_3_CTRL);
+ writel(cfg, spi_imx->base + SPI_IMX2_3_CONFIG);
+
+ return 0;
+}
+
+static int __maybe_unused spi_imx2_3_rx_available(struct spi_imx_data *spi_imx)
+{
+ return readl(spi_imx->base + SPI_IMX2_3_STAT) & SPI_IMX2_3_STAT_RR;
+}
+
+static void __maybe_unused spi_imx2_3_reset(struct spi_imx_data *spi_imx)
+{
+ /* drain receive buffer */
+ while (spi_imx2_3_rx_available(spi_imx))
+ readl(spi_imx->base + MXC_CSPIRXDATA);
+}
+
#define MX31_INTREG_TEEN (1 << 0)
#define MX31_INTREG_RREN (1 << 3)
@@ -178,7 +317,7 @@
* the i.MX35 has a slightly different register layout for bits
* we do not use here.
*/
-static void mx31_intctrl(struct spi_imx_data *spi_imx, int enable)
+static void __maybe_unused mx31_intctrl(struct spi_imx_data *spi_imx, int enable)
{
unsigned int val = 0;
@@ -190,7 +329,7 @@
writel(val, spi_imx->base + MXC_CSPIINT);
}
-static void mx31_trigger(struct spi_imx_data *spi_imx)
+static void __maybe_unused mx31_trigger(struct spi_imx_data *spi_imx)
{
unsigned int reg;
@@ -199,20 +338,16 @@
writel(reg, spi_imx->base + MXC_CSPICTRL);
}
-static int mx31_config(struct spi_imx_data *spi_imx,
+static int __maybe_unused spi_imx0_4_config(struct spi_imx_data *spi_imx,
struct spi_imx_config *config)
{
unsigned int reg = MX31_CSPICTRL_ENABLE | MX31_CSPICTRL_MASTER;
+ int cs = spi_imx->chipselect[config->cs];
reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, config->speed_hz) <<
MX31_CSPICTRL_DR_SHIFT;
- if (cpu_is_mx31())
- reg |= (config->bpw - 1) << MX31_CSPICTRL_BC_SHIFT;
- else if (cpu_is_mx25() || cpu_is_mx35()) {
- reg |= (config->bpw - 1) << MX35_CSPICTRL_BL_SHIFT;
- reg |= MX31_CSPICTRL_SSCTL;
- }
+ reg |= (config->bpw - 1) << MX31_CSPICTRL_BC_SHIFT;
if (config->mode & SPI_CPHA)
reg |= MX31_CSPICTRL_PHA;
@@ -220,23 +355,52 @@
reg |= MX31_CSPICTRL_POL;
if (config->mode & SPI_CS_HIGH)
reg |= MX31_CSPICTRL_SSPOL;
- if (config->cs < 0) {
- if (cpu_is_mx31())
- reg |= (config->cs + 32) << MX31_CSPICTRL_CS_SHIFT;
- else if (cpu_is_mx25() || cpu_is_mx35())
- reg |= (config->cs + 32) << MX35_CSPICTRL_CS_SHIFT;
- }
+ if (cs < 0)
+ reg |= (cs + 32) << MX31_CSPICTRL_CS_SHIFT;
writel(reg, spi_imx->base + MXC_CSPICTRL);
return 0;
}
-static int mx31_rx_available(struct spi_imx_data *spi_imx)
+static int __maybe_unused spi_imx0_7_config(struct spi_imx_data *spi_imx,
+ struct spi_imx_config *config)
+{
+ unsigned int reg = MX31_CSPICTRL_ENABLE | MX31_CSPICTRL_MASTER;
+ int cs = spi_imx->chipselect[config->cs];
+
+ reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, config->speed_hz) <<
+ MX31_CSPICTRL_DR_SHIFT;
+
+ reg |= (config->bpw - 1) << MX35_CSPICTRL_BL_SHIFT;
+ reg |= MX31_CSPICTRL_SSCTL;
+
+ if (config->mode & SPI_CPHA)
+ reg |= MX31_CSPICTRL_PHA;
+ if (config->mode & SPI_CPOL)
+ reg |= MX31_CSPICTRL_POL;
+ if (config->mode & SPI_CS_HIGH)
+ reg |= MX31_CSPICTRL_SSPOL;
+ if (cs < 0)
+ reg |= (cs + 32) << MX35_CSPICTRL_CS_SHIFT;
+
+ writel(reg, spi_imx->base + MXC_CSPICTRL);
+
+ return 0;
+}
+
+static int __maybe_unused mx31_rx_available(struct spi_imx_data *spi_imx)
{
return readl(spi_imx->base + MX31_CSPISTATUS) & MX31_STATUS_RR;
}
+static void __maybe_unused spi_imx0_4_reset(struct spi_imx_data *spi_imx)
+{
+ /* drain receive buffer */
+ while (readl(spi_imx->base + MX3_CSPISTAT) & MX3_CSPISTAT_RR)
+ readl(spi_imx->base + MXC_CSPIRXDATA);
+}
+
#define MX27_INTREG_RR (1 << 4)
#define MX27_INTREG_TEEN (1 << 9)
#define MX27_INTREG_RREN (1 << 13)
@@ -250,7 +414,7 @@
#define MX27_CSPICTRL_DR_SHIFT 14
#define MX27_CSPICTRL_CS_SHIFT 19
-static void mx27_intctrl(struct spi_imx_data *spi_imx, int enable)
+static void __maybe_unused mx27_intctrl(struct spi_imx_data *spi_imx, int enable)
{
unsigned int val = 0;
@@ -262,7 +426,7 @@
writel(val, spi_imx->base + MXC_CSPIINT);
}
-static void mx27_trigger(struct spi_imx_data *spi_imx)
+static void __maybe_unused mx27_trigger(struct spi_imx_data *spi_imx)
{
unsigned int reg;
@@ -271,10 +435,11 @@
writel(reg, spi_imx->base + MXC_CSPICTRL);
}
-static int mx27_config(struct spi_imx_data *spi_imx,
+static int __maybe_unused mx27_config(struct spi_imx_data *spi_imx,
struct spi_imx_config *config)
{
unsigned int reg = MX27_CSPICTRL_ENABLE | MX27_CSPICTRL_MASTER;
+ int cs = spi_imx->chipselect[config->cs];
reg |= spi_imx_clkdiv_1(spi_imx->spi_clk, config->speed_hz) <<
MX27_CSPICTRL_DR_SHIFT;
@@ -286,19 +451,24 @@
reg |= MX27_CSPICTRL_POL;
if (config->mode & SPI_CS_HIGH)
reg |= MX27_CSPICTRL_SSPOL;
- if (config->cs < 0)
- reg |= (config->cs + 32) << MX27_CSPICTRL_CS_SHIFT;
+ if (cs < 0)
+ reg |= (cs + 32) << MX27_CSPICTRL_CS_SHIFT;
writel(reg, spi_imx->base + MXC_CSPICTRL);
return 0;
}
-static int mx27_rx_available(struct spi_imx_data *spi_imx)
+static int __maybe_unused mx27_rx_available(struct spi_imx_data *spi_imx)
{
return readl(spi_imx->base + MXC_CSPIINT) & MX27_INTREG_RR;
}
+static void __maybe_unused spi_imx0_0_reset(struct spi_imx_data *spi_imx)
+{
+ writel(1, spi_imx->base + MXC_RESET);
+}
+
#define MX1_INTREG_RR (1 << 3)
#define MX1_INTREG_TEEN (1 << 8)
#define MX1_INTREG_RREN (1 << 11)
@@ -310,7 +480,7 @@
#define MX1_CSPICTRL_MASTER (1 << 10)
#define MX1_CSPICTRL_DR_SHIFT 13
-static void mx1_intctrl(struct spi_imx_data *spi_imx, int enable)
+static void __maybe_unused mx1_intctrl(struct spi_imx_data *spi_imx, int enable)
{
unsigned int val = 0;
@@ -322,7 +492,7 @@
writel(val, spi_imx->base + MXC_CSPIINT);
}
-static void mx1_trigger(struct spi_imx_data *spi_imx)
+static void __maybe_unused mx1_trigger(struct spi_imx_data *spi_imx)
{
unsigned int reg;
@@ -331,7 +501,7 @@
writel(reg, spi_imx->base + MXC_CSPICTRL);
}
-static int mx1_config(struct spi_imx_data *spi_imx,
+static int __maybe_unused mx1_config(struct spi_imx_data *spi_imx,
struct spi_imx_config *config)
{
unsigned int reg = MX1_CSPICTRL_ENABLE | MX1_CSPICTRL_MASTER;
@@ -350,11 +520,73 @@
return 0;
}
-static int mx1_rx_available(struct spi_imx_data *spi_imx)
+static int __maybe_unused mx1_rx_available(struct spi_imx_data *spi_imx)
{
return readl(spi_imx->base + MXC_CSPIINT) & MX1_INTREG_RR;
}
+static void __maybe_unused mx1_reset(struct spi_imx_data *spi_imx)
+{
+ writel(1, spi_imx->base + MXC_RESET);
+}
+
+/*
+ * These version numbers are taken from the Freescale driver. Unfortunately it
+ * doesn't support i.MX1, so this entry doesn't match the scheme. :-(
+ */
+static struct spi_imx_devtype_data spi_imx_devtype_data[] __devinitdata = {
+#ifdef CONFIG_SPI_IMX_VER_IMX1
+ [SPI_IMX_VER_IMX1] = {
+ .intctrl = mx1_intctrl,
+ .config = mx1_config,
+ .trigger = mx1_trigger,
+ .rx_available = mx1_rx_available,
+ .reset = mx1_reset,
+ .fifosize = 8,
+ },
+#endif
+#ifdef CONFIG_SPI_IMX_VER_0_0
+ [SPI_IMX_VER_0_0] = {
+ .intctrl = mx27_intctrl,
+ .config = mx27_config,
+ .trigger = mx27_trigger,
+ .rx_available = mx27_rx_available,
+ .reset = spi_imx0_0_reset,
+ .fifosize = 8,
+ },
+#endif
+#ifdef CONFIG_SPI_IMX_VER_0_4
+ [SPI_IMX_VER_0_4] = {
+ .intctrl = mx31_intctrl,
+ .config = spi_imx0_4_config,
+ .trigger = mx31_trigger,
+ .rx_available = mx31_rx_available,
+ .reset = spi_imx0_4_reset,
+ .fifosize = 8,
+ },
+#endif
+#ifdef CONFIG_SPI_IMX_VER_0_7
+ [SPI_IMX_VER_0_7] = {
+ .intctrl = mx31_intctrl,
+ .config = spi_imx0_7_config,
+ .trigger = mx31_trigger,
+ .rx_available = mx31_rx_available,
+ .reset = spi_imx0_4_reset,
+ .fifosize = 8,
+ },
+#endif
+#ifdef CONFIG_SPI_IMX_VER_2_3
+ [SPI_IMX_VER_2_3] = {
+ .intctrl = spi_imx2_3_intctrl,
+ .config = spi_imx2_3_config,
+ .trigger = spi_imx2_3_trigger,
+ .rx_available = spi_imx2_3_rx_available,
+ .reset = spi_imx2_3_reset,
+ .fifosize = 64,
+ },
+#endif
+};
+
static void spi_imx_chipselect(struct spi_device *spi, int is_active)
{
struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
@@ -370,21 +602,21 @@
static void spi_imx_push(struct spi_imx_data *spi_imx)
{
- while (spi_imx->txfifo < 8) {
+ while (spi_imx->txfifo < spi_imx->devtype_data.fifosize) {
if (!spi_imx->count)
break;
spi_imx->tx(spi_imx);
spi_imx->txfifo++;
}
- spi_imx->trigger(spi_imx);
+ spi_imx->devtype_data.trigger(spi_imx);
}
static irqreturn_t spi_imx_isr(int irq, void *dev_id)
{
struct spi_imx_data *spi_imx = dev_id;
- while (spi_imx->rx_available(spi_imx)) {
+ while (spi_imx->devtype_data.rx_available(spi_imx)) {
spi_imx->rx(spi_imx);
spi_imx->txfifo--;
}
@@ -398,11 +630,12 @@
/* No data left to push, but still waiting for rx data,
* enable receive data available interrupt.
*/
- spi_imx->intctrl(spi_imx, MXC_INT_RR);
+ spi_imx->devtype_data.intctrl(
+ spi_imx, MXC_INT_RR);
return IRQ_HANDLED;
}
- spi_imx->intctrl(spi_imx, 0);
+ spi_imx->devtype_data.intctrl(spi_imx, 0);
complete(&spi_imx->xfer_done);
return IRQ_HANDLED;
@@ -417,7 +650,7 @@
config.bpw = t ? t->bits_per_word : spi->bits_per_word;
config.speed_hz = t ? t->speed_hz : spi->max_speed_hz;
config.mode = spi->mode;
- config.cs = spi_imx->chipselect[spi->chip_select];
+ config.cs = spi->chip_select;
if (!config.speed_hz)
config.speed_hz = spi->max_speed_hz;
@@ -439,7 +672,7 @@
} else
BUG();
- spi_imx->config(spi_imx, &config);
+ spi_imx->devtype_data.config(spi_imx, &config);
return 0;
}
@@ -458,7 +691,7 @@
spi_imx_push(spi_imx);
- spi_imx->intctrl(spi_imx, MXC_INT_TE);
+ spi_imx->devtype_data.intctrl(spi_imx, MXC_INT_TE);
wait_for_completion(&spi_imx->xfer_done);
@@ -485,6 +718,39 @@
{
}
+static struct platform_device_id spi_imx_devtype[] = {
+ {
+ .name = DRIVER_NAME,
+ .driver_data = SPI_IMX_VER_AUTODETECT,
+ }, {
+ .name = "imx1-cspi",
+ .driver_data = SPI_IMX_VER_IMX1,
+ }, {
+ .name = "imx21-cspi",
+ .driver_data = SPI_IMX_VER_0_0,
+ }, {
+ .name = "imx25-cspi",
+ .driver_data = SPI_IMX_VER_0_7,
+ }, {
+ .name = "imx27-cspi",
+ .driver_data = SPI_IMX_VER_0_0,
+ }, {
+ .name = "imx31-cspi",
+ .driver_data = SPI_IMX_VER_0_4,
+ }, {
+ .name = "imx35-cspi",
+ .driver_data = SPI_IMX_VER_0_7,
+ }, {
+ .name = "imx51-cspi",
+ .driver_data = SPI_IMX_VER_0_7,
+ }, {
+ .name = "imx51-ecspi",
+ .driver_data = SPI_IMX_VER_2_3,
+ }, {
+ /* sentinel */
+ }
+};
+
static int __devinit spi_imx_probe(struct platform_device *pdev)
{
struct spi_imx_master *mxc_platform_info;
@@ -536,6 +802,31 @@
init_completion(&spi_imx->xfer_done);
+ if (pdev->id_entry->driver_data == SPI_IMX_VER_AUTODETECT) {
+ if (cpu_is_mx25() || cpu_is_mx35())
+ spi_imx->devtype_data =
+ spi_imx_devtype_data[SPI_IMX_VER_0_7];
+ else if (cpu_is_mx25() || cpu_is_mx31() || cpu_is_mx35())
+ spi_imx->devtype_data =
+ spi_imx_devtype_data[SPI_IMX_VER_0_4];
+ else if (cpu_is_mx27() || cpu_is_mx21())
+ spi_imx->devtype_data =
+ spi_imx_devtype_data[SPI_IMX_VER_0_0];
+ else if (cpu_is_mx1())
+ spi_imx->devtype_data =
+ spi_imx_devtype_data[SPI_IMX_VER_IMX1];
+ else
+ BUG();
+ } else
+ spi_imx->devtype_data =
+ spi_imx_devtype_data[pdev->id_entry->driver_data];
+
+ if (!spi_imx->devtype_data.intctrl) {
+ dev_err(&pdev->dev, "no support for this device compiled in\n");
+ ret = -ENODEV;
+ goto out_gpio_free;
+ }
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "can't get platform resource\n");
@@ -567,24 +858,6 @@
goto out_iounmap;
}
- if (cpu_is_mx25() || cpu_is_mx31() || cpu_is_mx35()) {
- spi_imx->intctrl = mx31_intctrl;
- spi_imx->config = mx31_config;
- spi_imx->trigger = mx31_trigger;
- spi_imx->rx_available = mx31_rx_available;
- } else if (cpu_is_mx27() || cpu_is_mx21()) {
- spi_imx->intctrl = mx27_intctrl;
- spi_imx->config = mx27_config;
- spi_imx->trigger = mx27_trigger;
- spi_imx->rx_available = mx27_rx_available;
- } else if (cpu_is_mx1()) {
- spi_imx->intctrl = mx1_intctrl;
- spi_imx->config = mx1_config;
- spi_imx->trigger = mx1_trigger;
- spi_imx->rx_available = mx1_rx_available;
- } else
- BUG();
-
spi_imx->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(spi_imx->clk)) {
dev_err(&pdev->dev, "unable to get clock\n");
@@ -595,15 +868,9 @@
clk_enable(spi_imx->clk);
spi_imx->spi_clk = clk_get_rate(spi_imx->clk);
- if (cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27())
- writel(1, spi_imx->base + MXC_RESET);
+ spi_imx->devtype_data.reset(spi_imx);
- /* drain receive buffer */
- if (cpu_is_mx25() || cpu_is_mx31() || cpu_is_mx35())
- while (readl(spi_imx->base + MX3_CSPISTAT) & MX3_CSPISTAT_RR)
- readl(spi_imx->base + MXC_CSPIRXDATA);
-
- spi_imx->intctrl(spi_imx, 0);
+ spi_imx->devtype_data.intctrl(spi_imx, 0);
ret = spi_bitbang_start(&spi_imx->bitbang);
if (ret) {
@@ -668,6 +935,7 @@
.name = DRIVER_NAME,
.owner = THIS_MODULE,
},
+ .id_table = spi_imx_devtype,
.probe = spi_imx_probe,
.remove = __devexit_p(spi_imx_remove),
};
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index 4181638..afef7b0 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -24,6 +24,7 @@
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <mach/ohci.h>
+#include <mach/pxa3xx-u2d.h>
/*
* UHC: USB Host Controller (OHCI-like) register definitions
@@ -235,6 +236,9 @@
if (retval < 0)
return retval;
+ if (cpu_is_pxa3xx())
+ pxa3xx_u2d_start_hc(&ohci_to_hcd(&ohci->ohci)->self);
+
uhchr = __raw_readl(ohci->mmio_base + UHCHR) & ~UHCHR_SSE;
__raw_writel(uhchr, ohci->mmio_base + UHCHR);
__raw_writel(UHCHIE_UPRIE | UHCHIE_RWIE, ohci->mmio_base + UHCHIE);
@@ -251,6 +255,9 @@
inf = dev->platform_data;
+ if (cpu_is_pxa3xx())
+ pxa3xx_u2d_stop_hc(&ohci_to_hcd(&ohci->ohci)->self);
+
if (inf->exit)
inf->exit(dev);
diff --git a/drivers/video/pxa168fb.c b/drivers/video/pxa168fb.c
index a31a77f..cea6403 100644
--- a/drivers/video/pxa168fb.c
+++ b/drivers/video/pxa168fb.c
@@ -784,12 +784,53 @@
return ret;
}
+static int __devexit pxa168fb_remove(struct platform_device *pdev)
+{
+ struct pxa168fb_info *fbi = platform_get_drvdata(pdev);
+ struct fb_info *info;
+ int irq;
+ unsigned int data;
+
+ if (!fbi)
+ return 0;
+
+ /* disable DMA transfer */
+ data = readl(fbi->reg_base + LCD_SPU_DMA_CTRL0);
+ data &= ~CFG_GRA_ENA_MASK;
+ writel(data, fbi->reg_base + LCD_SPU_DMA_CTRL0);
+
+ info = fbi->info;
+
+ unregister_framebuffer(info);
+
+ writel(GRA_FRAME_IRQ0_ENA(0x0), fbi->reg_base + SPU_IRQ_ENA);
+
+ if (info->cmap.len)
+ fb_dealloc_cmap(&info->cmap);
+
+ irq = platform_get_irq(pdev, 0);
+ free_irq(irq, fbi);
+
+ dma_free_writecombine(fbi->dev, PAGE_ALIGN(info->fix.smem_len),
+ info->screen_base, info->fix.smem_start);
+
+ iounmap(fbi->reg_base);
+
+ clk_disable(fbi->clk);
+ clk_put(fbi->clk);
+
+ framebuffer_release(info);
+
+ return 0;
+}
+
static struct platform_driver pxa168fb_driver = {
.driver = {
.name = "pxa168-fb",
.owner = THIS_MODULE,
},
.probe = pxa168fb_probe,
+ .remove = __devexit_p(pxa168fb_remove),
};
static int __init pxa168fb_init(void)
@@ -798,6 +839,12 @@
}
module_init(pxa168fb_init);
+static void __exit pxa168fb_exit(void)
+{
+ platform_driver_unregister(&pxa168fb_driver);
+}
+module_exit(pxa168fb_exit);
+
MODULE_AUTHOR("Lennert Buytenhek <buytenh@marvell.com> "
"Green Wan <gwan@marvell.com>");
MODULE_DESCRIPTION("Framebuffer driver for PXA168/910");