Merge tag 'keystone-soc-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/soc
From Santosh Shilimkar:
SOC updates for Keystone II devices:
- Clock tree support
- Clock management support using PM core
- Keystone config update for EMDA with ack from Vinod
- Enable SPI and I2C drivers
* tag 'keystone-soc-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: (510 commits)
ARM: keystone: Enable I2C and SPI bus support
ARM: keystone: Select TI_EDMA to be able to enable SPI driver
dma: Allow TI_EDMA selectable for ARCH_KEYSTONE
ARM: dts: keystone: Add the SPI nodes
ARM: dts: keystone: Add i2c device nodes
ARM: keystone: add PM domain support for clock management
ARM: keystone: Enable clock drivers
ARM: dts: keystone: Add clock phandle to UART nodes
ARM: dts: keystone: Add clock tree data to devicetree
+Linux 3.12-rc4
Signed-off-by: Kevin Hilman <khilman@linaro.org>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1ad6fb6..5ef8136 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -727,6 +727,7 @@
select ARM_VIC
select CLKDEV_LOOKUP
select CLKSRC_SAMSUNG_PWM
+ select COMMON_CLK
select CPU_V6
select GENERIC_CLOCKEVENTS
select GPIO_SAMSUNG
@@ -740,7 +741,6 @@
select S3C_DEV_NAND
select S3C_GPIO_TRACK
select SAMSUNG_ATAGS
- select SAMSUNG_CLKSRC
select SAMSUNG_GPIOLIB_4BIT
select SAMSUNG_WDT_RESET
select USB_ARCH_HAS_OHCI
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
new file mode 100644
index 0000000..46b82aa
--- /dev/null
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -0,0 +1,36 @@
+/*
+ * Device Tree Source for the r7s72100 SoC
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/ {
+ compatible = "renesas,r7s72100";
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ };
+ };
+
+ gic: interrupt-controller@e8201000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0xe8201000 0x1000>,
+ <0xe8202000 0x1000>;
+ };
+};
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
new file mode 100644
index 0000000..bbed43b
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -0,0 +1,41 @@
+/*
+ * Device Tree Source for the r8a7791 SoC
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/ {
+ compatible = "renesas,r8a7791";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0>;
+ clock-frequency = <1300000000>;
+ };
+ };
+
+ gic: interrupt-controller@f1001000 {
+ compatible = "arm,cortex-a15-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0 0xf1001000 0 0x1000>,
+ <0 0xf1002000 0 0x1000>,
+ <0 0xf1004000 0 0x2000>,
+ <0 0xf1006000 0 0x2000>;
+ interrupts = <1 9 0xf04>;
+ };
+};
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index c4bdc0a..30a44e2 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -74,7 +74,7 @@
if (handler != NULL) {
da830_evm_usb_ocic_handler = handler;
- error = request_irq(irq, da830_evm_usb_ocic_irq, IRQF_DISABLED |
+ error = request_irq(irq, da830_evm_usb_ocic_irq,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"OHCI over-current indicator", NULL);
if (error)
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index ab98c75..e0de2da 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -211,7 +211,7 @@
hawk_usb_ocic_handler = handler;
error = request_irq(irq, omapl138_hawk_usb_ocic_irq,
- IRQF_DISABLED | IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_RISING |
IRQF_TRIGGER_FALLING,
"OHCI over-current indicator", NULL);
if (error)
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index 7a55b5c..e7ada0c 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -181,7 +181,7 @@
.name = "clockevent",
.opts = TIMER_OPTS_DISABLED,
.irqaction = {
- .flags = IRQF_DISABLED | IRQF_TIMER,
+ .flags = IRQF_TIMER,
.handler = timer_interrupt,
}
},
@@ -190,7 +190,7 @@
.period = ~0,
.opts = TIMER_OPTS_PERIODIC,
.irqaction = {
- .flags = IRQF_DISABLED | IRQF_TIMER,
+ .flags = IRQF_TIMER,
.handler = freerun_interrupt,
}
},
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index 31d0c91..645a8fe 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -12,7 +12,7 @@
# Core
-obj-y += common.o clock.o
+obj-y += common.o
# Core support
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
deleted file mode 100644
index c1bcc4a6..0000000
--- a/arch/arm/mach-s3c64xx/clock.c
+++ /dev/null
@@ -1,1007 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/clock.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C64XX Base clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/pll.h>
-
-#include "regs-sys.h"
-
-/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
- * ext_xtal_mux for want of an actual name from the manual.
-*/
-
-static struct clk clk_ext_xtal_mux = {
- .name = "ext_xtal",
-};
-
-#define clk_fin_apll clk_ext_xtal_mux
-#define clk_fin_mpll clk_ext_xtal_mux
-#define clk_fin_epll clk_ext_xtal_mux
-
-#define clk_fout_mpll clk_mpll
-#define clk_fout_epll clk_epll
-
-struct clk clk_h2 = {
- .name = "hclk2",
- .rate = 0,
-};
-
-struct clk clk_27m = {
- .name = "clk_27m",
- .rate = 27000000,
-};
-
-static int clk_48m_ctrl(struct clk *clk, int enable)
-{
- unsigned long flags;
- u32 val;
-
- /* can't rely on clock lock, this register has other usages */
- local_irq_save(flags);
-
- val = __raw_readl(S3C64XX_OTHERS);
- if (enable)
- val |= S3C64XX_OTHERS_USBMASK;
- else
- val &= ~S3C64XX_OTHERS_USBMASK;
-
- __raw_writel(val, S3C64XX_OTHERS);
- local_irq_restore(flags);
-
- return 0;
-}
-
-struct clk clk_48m = {
- .name = "clk_48m",
- .rate = 48000000,
- .enable = clk_48m_ctrl,
-};
-
-struct clk clk_xusbxti = {
- .name = "xusbxti",
- .rate = 48000000,
-};
-
-static int inline s3c64xx_gate(void __iomem *reg,
- struct clk *clk,
- int enable)
-{
- unsigned int ctrlbit = clk->ctrlbit;
- u32 con;
-
- con = __raw_readl(reg);
-
- if (enable)
- con |= ctrlbit;
- else
- con &= ~ctrlbit;
-
- __raw_writel(con, reg);
- return 0;
-}
-
-static int s3c64xx_pclk_ctrl(struct clk *clk, int enable)
-{
- return s3c64xx_gate(S3C_PCLK_GATE, clk, enable);
-}
-
-static int s3c64xx_hclk_ctrl(struct clk *clk, int enable)
-{
- return s3c64xx_gate(S3C_HCLK_GATE, clk, enable);
-}
-
-int s3c64xx_sclk_ctrl(struct clk *clk, int enable)
-{
- return s3c64xx_gate(S3C_SCLK_GATE, clk, enable);
-}
-
-static struct clk init_clocks_off[] = {
- {
- .name = "nand",
- .parent = &clk_h,
- }, {
- .name = "rtc",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_RTC,
- }, {
- .name = "adc",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_TSADC,
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.0",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_IIC,
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.1",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C6410_CLKCON_PCLK_I2C1,
- }, {
- .name = "keypad",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_KEYPAD,
- }, {
- .name = "spi",
- .devname = "s3c6410-spi.0",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_SPI0,
- }, {
- .name = "spi",
- .devname = "s3c6410-spi.1",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_SPI1,
- }, {
- .name = "48m",
- .devname = "s3c-sdhci.0",
- .parent = &clk_48m,
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_MMC0_48,
- }, {
- .name = "48m",
- .devname = "s3c-sdhci.1",
- .parent = &clk_48m,
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_MMC1_48,
- }, {
- .name = "48m",
- .devname = "s3c-sdhci.2",
- .parent = &clk_48m,
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_MMC2_48,
- }, {
- .name = "ac97",
- .parent = &clk_p,
- .ctrlbit = S3C_CLKCON_PCLK_AC97,
- }, {
- .name = "cfcon",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_IHOST,
- }, {
- .name = "dma0",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_DMA0,
- }, {
- .name = "dma1",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_DMA1,
- }, {
- .name = "3dse",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_3DSE,
- }, {
- .name = "hclk_secur",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_SECUR,
- }, {
- .name = "sdma1",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_SDMA1,
- }, {
- .name = "sdma0",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_SDMA0,
- }, {
- .name = "hclk_jpeg",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_JPEG,
- }, {
- .name = "camif",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_CAMIF,
- }, {
- .name = "hclk_scaler",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_SCALER,
- }, {
- .name = "2d",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_2D,
- }, {
- .name = "tv",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_TV,
- }, {
- .name = "post0",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_POST0,
- }, {
- .name = "rot",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_ROT,
- }, {
- .name = "hclk_mfc",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_MFC,
- }, {
- .name = "pclk_mfc",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_MFC,
- }, {
- .name = "dac27",
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_DAC27,
- }, {
- .name = "tv27",
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_TV27,
- }, {
- .name = "scaler27",
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_SCALER27,
- }, {
- .name = "sclk_scaler",
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_SCALER,
- }, {
- .name = "post0_27",
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_POST0_27,
- }, {
- .name = "secur",
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_SECUR,
- }, {
- .name = "sclk_mfc",
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_MFC,
- }, {
- .name = "sclk_jpeg",
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_JPEG,
- },
-};
-
-static struct clk clk_48m_spi0 = {
- .name = "spi_48m",
- .devname = "s3c6410-spi.0",
- .parent = &clk_48m,
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_SPI0_48,
-};
-
-static struct clk clk_48m_spi1 = {
- .name = "spi_48m",
- .devname = "s3c6410-spi.1",
- .parent = &clk_48m,
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_SPI1_48,
-};
-
-static struct clk clk_i2s0 = {
- .name = "iis",
- .devname = "samsung-i2s.0",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_IIS0,
-};
-
-static struct clk clk_i2s1 = {
- .name = "iis",
- .devname = "samsung-i2s.1",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_IIS1,
-};
-
-#ifdef CONFIG_CPU_S3C6410
-static struct clk clk_i2s2 = {
- .name = "iis",
- .devname = "samsung-i2s.2",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C6410_CLKCON_PCLK_IIS2,
-};
-#endif
-
-static struct clk init_clocks[] = {
- {
- .name = "lcd",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_LCD,
- }, {
- .name = "gpio",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_GPIO,
- }, {
- .name = "usb-host",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_UHOST,
- }, {
- .name = "otg",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_USB,
- }, {
- .name = "timers",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_PWM,
- }, {
- .name = "uart",
- .devname = "s3c6400-uart.0",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_UART0,
- }, {
- .name = "uart",
- .devname = "s3c6400-uart.1",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_UART1,
- }, {
- .name = "uart",
- .devname = "s3c6400-uart.2",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_UART2,
- }, {
- .name = "uart",
- .devname = "s3c6400-uart.3",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_UART3,
- }, {
- .name = "watchdog",
- .parent = &clk_p,
- .ctrlbit = S3C_CLKCON_PCLK_WDT,
- },
-};
-
-static struct clk clk_hsmmc0 = {
- .name = "hsmmc",
- .devname = "s3c-sdhci.0",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_HSMMC0,
-};
-
-static struct clk clk_hsmmc1 = {
- .name = "hsmmc",
- .devname = "s3c-sdhci.1",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_HSMMC1,
-};
-
-static struct clk clk_hsmmc2 = {
- .name = "hsmmc",
- .devname = "s3c-sdhci.2",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_HSMMC2,
-};
-
-static struct clk clk_fout_apll = {
- .name = "fout_apll",
-};
-
-static struct clk *clk_src_apll_list[] = {
- [0] = &clk_fin_apll,
- [1] = &clk_fout_apll,
-};
-
-static struct clksrc_sources clk_src_apll = {
- .sources = clk_src_apll_list,
- .nr_sources = ARRAY_SIZE(clk_src_apll_list),
-};
-
-static struct clksrc_clk clk_mout_apll = {
- .clk = {
- .name = "mout_apll",
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 0, .size = 1 },
- .sources = &clk_src_apll,
-};
-
-static struct clk *clk_src_epll_list[] = {
- [0] = &clk_fin_epll,
- [1] = &clk_fout_epll,
-};
-
-static struct clksrc_sources clk_src_epll = {
- .sources = clk_src_epll_list,
- .nr_sources = ARRAY_SIZE(clk_src_epll_list),
-};
-
-static struct clksrc_clk clk_mout_epll = {
- .clk = {
- .name = "mout_epll",
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 2, .size = 1 },
- .sources = &clk_src_epll,
-};
-
-static struct clk *clk_src_mpll_list[] = {
- [0] = &clk_fin_mpll,
- [1] = &clk_fout_mpll,
-};
-
-static struct clksrc_sources clk_src_mpll = {
- .sources = clk_src_mpll_list,
- .nr_sources = ARRAY_SIZE(clk_src_mpll_list),
-};
-
-static struct clksrc_clk clk_mout_mpll = {
- .clk = {
- .name = "mout_mpll",
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 1, .size = 1 },
- .sources = &clk_src_mpll,
-};
-
-static unsigned int armclk_mask;
-
-static unsigned long s3c64xx_clk_arm_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- u32 clkdiv;
-
- /* divisor mask starts at bit0, so no need to shift */
- clkdiv = __raw_readl(S3C_CLK_DIV0) & armclk_mask;
-
- return rate / (clkdiv + 1);
-}
-
-static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk,
- unsigned long rate)
-{
- unsigned long parent = clk_get_rate(clk->parent);
- u32 div;
-
- if (parent < rate)
- return parent;
-
- div = (parent / rate) - 1;
- if (div > armclk_mask)
- div = armclk_mask;
-
- return parent / (div + 1);
-}
-
-static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long parent = clk_get_rate(clk->parent);
- u32 div;
- u32 val;
-
- if (rate < parent / (armclk_mask + 1))
- return -EINVAL;
-
- rate = clk_round_rate(clk, rate);
- div = clk_get_rate(clk->parent) / rate;
-
- val = __raw_readl(S3C_CLK_DIV0);
- val &= ~armclk_mask;
- val |= (div - 1);
- __raw_writel(val, S3C_CLK_DIV0);
-
- return 0;
-
-}
-
-static struct clk clk_arm = {
- .name = "armclk",
- .parent = &clk_mout_apll.clk,
- .ops = &(struct clk_ops) {
- .get_rate = s3c64xx_clk_arm_get_rate,
- .set_rate = s3c64xx_clk_arm_set_rate,
- .round_rate = s3c64xx_clk_arm_round_rate,
- },
-};
-
-static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
-
- printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
- if (__raw_readl(S3C_CLK_DIV0) & S3C6400_CLKDIV0_MPLL_MASK)
- rate /= 2;
-
- return rate;
-}
-
-static struct clk_ops clk_dout_ops = {
- .get_rate = s3c64xx_clk_doutmpll_get_rate,
-};
-
-static struct clk clk_dout_mpll = {
- .name = "dout_mpll",
- .parent = &clk_mout_mpll.clk,
- .ops = &clk_dout_ops,
-};
-
-static struct clk *clkset_spi_mmc_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll,
- &clk_fin_epll,
- &clk_27m,
-};
-
-static struct clksrc_sources clkset_spi_mmc = {
- .sources = clkset_spi_mmc_list,
- .nr_sources = ARRAY_SIZE(clkset_spi_mmc_list),
-};
-
-static struct clk *clkset_irda_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll,
- NULL,
- &clk_27m,
-};
-
-static struct clksrc_sources clkset_irda = {
- .sources = clkset_irda_list,
- .nr_sources = ARRAY_SIZE(clkset_irda_list),
-};
-
-static struct clk *clkset_uart_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll,
- NULL,
- NULL
-};
-
-static struct clksrc_sources clkset_uart = {
- .sources = clkset_uart_list,
- .nr_sources = ARRAY_SIZE(clkset_uart_list),
-};
-
-static struct clk *clkset_uhost_list[] = {
- &clk_48m,
- &clk_mout_epll.clk,
- &clk_dout_mpll,
- &clk_fin_epll,
-};
-
-static struct clksrc_sources clkset_uhost = {
- .sources = clkset_uhost_list,
- .nr_sources = ARRAY_SIZE(clkset_uhost_list),
-};
-
-/* The peripheral clocks are all controlled via clocksource followed
- * by an optional divider and gate stage. We currently roll this into
- * one clock which hides the intermediate clock from the mux.
- *
- * Note, the JPEG clock can only be an even divider...
- *
- * The scaler and LCD clocks depend on the S3C64XX version, and also
- * have a common parent divisor so are not included here.
- */
-
-/* clocks that feed other parts of the clock source tree */
-
-static struct clk clk_iis_cd0 = {
- .name = "iis_cdclk0",
-};
-
-static struct clk clk_iis_cd1 = {
- .name = "iis_cdclk1",
-};
-
-static struct clk clk_iisv4_cd = {
- .name = "iis_cdclk_v4",
-};
-
-static struct clk clk_pcm_cd = {
- .name = "pcm_cdclk",
-};
-
-static struct clk *clkset_audio0_list[] = {
- [0] = &clk_mout_epll.clk,
- [1] = &clk_dout_mpll,
- [2] = &clk_fin_epll,
- [3] = &clk_iis_cd0,
- [4] = &clk_pcm_cd,
-};
-
-static struct clksrc_sources clkset_audio0 = {
- .sources = clkset_audio0_list,
- .nr_sources = ARRAY_SIZE(clkset_audio0_list),
-};
-
-static struct clk *clkset_audio1_list[] = {
- [0] = &clk_mout_epll.clk,
- [1] = &clk_dout_mpll,
- [2] = &clk_fin_epll,
- [3] = &clk_iis_cd1,
- [4] = &clk_pcm_cd,
-};
-
-static struct clksrc_sources clkset_audio1 = {
- .sources = clkset_audio1_list,
- .nr_sources = ARRAY_SIZE(clkset_audio1_list),
-};
-
-#ifdef CONFIG_CPU_S3C6410
-static struct clk *clkset_audio2_list[] = {
- [0] = &clk_mout_epll.clk,
- [1] = &clk_dout_mpll,
- [2] = &clk_fin_epll,
- [3] = &clk_iisv4_cd,
- [4] = &clk_pcm_cd,
-};
-
-static struct clksrc_sources clkset_audio2 = {
- .sources = clkset_audio2_list,
- .nr_sources = ARRAY_SIZE(clkset_audio2_list),
-};
-#endif
-
-static struct clksrc_clk clksrcs[] = {
- {
- .clk = {
- .name = "usb-bus-host",
- .ctrlbit = S3C_CLKCON_SCLK_UHOST,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 5, .size = 2 },
- .reg_div = { .reg = S3C_CLK_DIV1, .shift = 20, .size = 4 },
- .sources = &clkset_uhost,
- }, {
- .clk = {
- .name = "irda-bus",
- .ctrlbit = S3C_CLKCON_SCLK_IRDA,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 24, .size = 2 },
- .reg_div = { .reg = S3C_CLK_DIV2, .shift = 20, .size = 4 },
- .sources = &clkset_irda,
- }, {
- .clk = {
- .name = "camera",
- .ctrlbit = S3C_CLKCON_SCLK_CAM,
- .enable = s3c64xx_sclk_ctrl,
- .parent = &clk_h2,
- },
- .reg_div = { .reg = S3C_CLK_DIV0, .shift = 20, .size = 4 },
- },
-};
-
-/* Where does UCLK0 come from? */
-static struct clksrc_clk clk_sclk_uclk = {
- .clk = {
- .name = "uclk1",
- .ctrlbit = S3C_CLKCON_SCLK_UART,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 13, .size = 1 },
- .reg_div = { .reg = S3C_CLK_DIV2, .shift = 16, .size = 4 },
- .sources = &clkset_uart,
-};
-
-static struct clksrc_clk clk_sclk_mmc0 = {
- .clk = {
- .name = "mmc_bus",
- .devname = "s3c-sdhci.0",
- .ctrlbit = S3C_CLKCON_SCLK_MMC0,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 18, .size = 2 },
- .reg_div = { .reg = S3C_CLK_DIV1, .shift = 0, .size = 4 },
- .sources = &clkset_spi_mmc,
-};
-
-static struct clksrc_clk clk_sclk_mmc1 = {
- .clk = {
- .name = "mmc_bus",
- .devname = "s3c-sdhci.1",
- .ctrlbit = S3C_CLKCON_SCLK_MMC1,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 20, .size = 2 },
- .reg_div = { .reg = S3C_CLK_DIV1, .shift = 4, .size = 4 },
- .sources = &clkset_spi_mmc,
-};
-
-static struct clksrc_clk clk_sclk_mmc2 = {
- .clk = {
- .name = "mmc_bus",
- .devname = "s3c-sdhci.2",
- .ctrlbit = S3C_CLKCON_SCLK_MMC2,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 22, .size = 2 },
- .reg_div = { .reg = S3C_CLK_DIV1, .shift = 8, .size = 4 },
- .sources = &clkset_spi_mmc,
-};
-
-static struct clksrc_clk clk_sclk_spi0 = {
- .clk = {
- .name = "spi-bus",
- .devname = "s3c6410-spi.0",
- .ctrlbit = S3C_CLKCON_SCLK_SPI0,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 14, .size = 2 },
- .reg_div = { .reg = S3C_CLK_DIV2, .shift = 0, .size = 4 },
- .sources = &clkset_spi_mmc,
-};
-
-static struct clksrc_clk clk_sclk_spi1 = {
- .clk = {
- .name = "spi-bus",
- .devname = "s3c6410-spi.1",
- .ctrlbit = S3C_CLKCON_SCLK_SPI1,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 16, .size = 2 },
- .reg_div = { .reg = S3C_CLK_DIV2, .shift = 4, .size = 4 },
- .sources = &clkset_spi_mmc,
-};
-
-static struct clksrc_clk clk_audio_bus0 = {
- .clk = {
- .name = "audio-bus",
- .devname = "samsung-i2s.0",
- .ctrlbit = S3C_CLKCON_SCLK_AUDIO0,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 7, .size = 3 },
- .reg_div = { .reg = S3C_CLK_DIV2, .shift = 8, .size = 4 },
- .sources = &clkset_audio0,
-};
-
-static struct clksrc_clk clk_audio_bus1 = {
- .clk = {
- .name = "audio-bus",
- .devname = "samsung-i2s.1",
- .ctrlbit = S3C_CLKCON_SCLK_AUDIO1,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 10, .size = 3 },
- .reg_div = { .reg = S3C_CLK_DIV2, .shift = 12, .size = 4 },
- .sources = &clkset_audio1,
-};
-
-#ifdef CONFIG_CPU_S3C6410
-static struct clksrc_clk clk_audio_bus2 = {
- .clk = {
- .name = "audio-bus",
- .devname = "samsung-i2s.2",
- .ctrlbit = S3C6410_CLKCON_SCLK_AUDIO2,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C6410_CLK_SRC2, .shift = 0, .size = 3 },
- .reg_div = { .reg = S3C_CLK_DIV2, .shift = 24, .size = 4 },
- .sources = &clkset_audio2,
-};
-#endif
-/* Clock initialisation code */
-
-static struct clksrc_clk *init_parents[] = {
- &clk_mout_apll,
- &clk_mout_epll,
- &clk_mout_mpll,
-};
-
-static struct clksrc_clk *clksrc_cdev[] = {
- &clk_sclk_uclk,
- &clk_sclk_mmc0,
- &clk_sclk_mmc1,
- &clk_sclk_mmc2,
- &clk_sclk_spi0,
- &clk_sclk_spi1,
- &clk_audio_bus0,
- &clk_audio_bus1,
-};
-
-static struct clk *clk_cdev[] = {
- &clk_hsmmc0,
- &clk_hsmmc1,
- &clk_hsmmc2,
- &clk_48m_spi0,
- &clk_48m_spi1,
- &clk_i2s0,
- &clk_i2s1,
-};
-
-static struct clk_lookup s3c64xx_clk_lookup[] = {
- CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
- CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk),
- CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &clk_hsmmc0),
- CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &clk_hsmmc1),
- CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.0", &clk_hsmmc2),
- CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
- CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
- CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
- CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
- CLKDEV_INIT("s3c6410-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
- CLKDEV_INIT("s3c6410-spi.0", "spi_busclk2", &clk_48m_spi0),
- CLKDEV_INIT("s3c6410-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
- CLKDEV_INIT("s3c6410-spi.1", "spi_busclk2", &clk_48m_spi1),
- CLKDEV_INIT("samsung-i2s.0", "i2s_opclk0", &clk_i2s0),
- CLKDEV_INIT("samsung-i2s.0", "i2s_opclk1", &clk_audio_bus0.clk),
- CLKDEV_INIT("samsung-i2s.1", "i2s_opclk0", &clk_i2s1),
- CLKDEV_INIT("samsung-i2s.1", "i2s_opclk1", &clk_audio_bus1.clk),
-#ifdef CONFIG_CPU_S3C6410
- CLKDEV_INIT("samsung-i2s.2", "i2s_opclk0", &clk_i2s2),
- CLKDEV_INIT("samsung-i2s.2", "i2s_opclk1", &clk_audio_bus2.clk),
-#endif
-};
-
-#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
-
-void __init_or_cpufreq s3c64xx_setup_clocks(void)
-{
- struct clk *xtal_clk;
- unsigned long xtal;
- unsigned long fclk;
- unsigned long hclk;
- unsigned long hclk2;
- unsigned long pclk;
- unsigned long epll;
- unsigned long apll;
- unsigned long mpll;
- unsigned int ptr;
- u32 clkdiv0;
-
- printk(KERN_DEBUG "%s: registering clocks\n", __func__);
-
- clkdiv0 = __raw_readl(S3C_CLK_DIV0);
- printk(KERN_DEBUG "%s: clkdiv0 = %08x\n", __func__, clkdiv0);
-
- xtal_clk = clk_get(NULL, "xtal");
- BUG_ON(IS_ERR(xtal_clk));
-
- xtal = clk_get_rate(xtal_clk);
- clk_put(xtal_clk);
-
- printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
-
- /* For now assume the mux always selects the crystal */
- clk_ext_xtal_mux.parent = xtal_clk;
-
- epll = s3c_get_pll6553x(xtal, __raw_readl(S3C_EPLL_CON0),
- __raw_readl(S3C_EPLL_CON1));
- mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON));
- apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON));
-
- fclk = mpll;
-
- printk(KERN_INFO "S3C64XX: PLL settings, A=%ld, M=%ld, E=%ld\n",
- apll, mpll, epll);
-
- if(__raw_readl(S3C64XX_OTHERS) & S3C64XX_OTHERS_SYNCMUXSEL)
- /* Synchronous mode */
- hclk2 = apll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
- else
- /* Asynchronous mode */
- hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
-
- hclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK);
- pclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_PCLK);
-
- printk(KERN_INFO "S3C64XX: HCLK2=%ld, HCLK=%ld, PCLK=%ld\n",
- hclk2, hclk, pclk);
-
- clk_fout_mpll.rate = mpll;
- clk_fout_epll.rate = epll;
- clk_fout_apll.rate = apll;
-
- clk_h2.rate = hclk2;
- clk_h.rate = hclk;
- clk_p.rate = pclk;
- clk_f.rate = fclk;
-
- for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
- s3c_set_clksrc(init_parents[ptr], true);
-
- for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
- s3c_set_clksrc(&clksrcs[ptr], true);
-}
-
-static struct clk *clks1[] __initdata = {
- &clk_ext_xtal_mux,
- &clk_iis_cd0,
- &clk_iis_cd1,
- &clk_iisv4_cd,
- &clk_pcm_cd,
- &clk_mout_epll.clk,
- &clk_mout_mpll.clk,
- &clk_dout_mpll,
- &clk_arm,
-};
-
-static struct clk *clks[] __initdata = {
- &clk_ext,
- &clk_epll,
- &clk_27m,
- &clk_48m,
- &clk_h2,
- &clk_xusbxti,
-};
-
-/**
- * s3c64xx_register_clocks - register clocks for s3c6400 and s3c6410
- * @xtal: The rate for the clock crystal feeding the PLLs.
- * @armclk_divlimit: Divisor mask for ARMCLK.
- *
- * Register the clocks for the S3C6400 and S3C6410 SoC range, such
- * as ARMCLK as well as the necessary parent clocks.
- *
- * This call does not setup the clocks, which is left to the
- * s3c64xx_setup_clocks() call which may be needed by the cpufreq
- * or resume code to re-set the clocks if the bootloader has changed
- * them.
- */
-void __init s3c64xx_register_clocks(unsigned long xtal,
- unsigned armclk_divlimit)
-{
- unsigned int cnt;
-
- armclk_mask = armclk_divlimit;
-
- s3c24xx_register_baseclocks(xtal);
- s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
- s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
-
- s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-
- s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev));
- for (cnt = 0; cnt < ARRAY_SIZE(clk_cdev); cnt++)
- s3c_disable_clocks(clk_cdev[cnt], 1);
-
- s3c24xx_register_clocks(clks1, ARRAY_SIZE(clks1));
- s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
- for (cnt = 0; cnt < ARRAY_SIZE(clksrc_cdev); cnt++)
- s3c_register_clksrc(clksrc_cdev[cnt], 1);
- clkdev_add_table(s3c64xx_clk_lookup, ARRAY_SIZE(s3c64xx_clk_lookup));
-}
diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c
index 73d79cf..7d3cb58 100644
--- a/arch/arm/mach-s3c64xx/common.c
+++ b/arch/arm/mach-s3c64xx/common.c
@@ -17,6 +17,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/clk-provider.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/serial_core.h>
@@ -38,7 +39,6 @@
#include <mach/regs-gpio.h>
#include <plat/cpu.h>
-#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/pm.h>
#include <plat/gpio-cfg.h>
@@ -50,6 +50,19 @@
#include "common.h"
+/* External clock frequency */
+static unsigned long xtal_f = 12000000, xusbxti_f = 48000000;
+
+void __init s3c64xx_set_xtal_freq(unsigned long freq)
+{
+ xtal_f = freq;
+}
+
+void __init s3c64xx_set_xusbxti_freq(unsigned long freq)
+{
+ xusbxti_f = freq;
+}
+
/* uart registration process */
static void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
@@ -67,7 +80,6 @@
.idcode = S3C6400_CPU_ID,
.idmask = S3C64XX_CPU_MASK,
.map_io = s3c6400_map_io,
- .init_clocks = s3c6400_init_clocks,
.init_uarts = s3c64xx_init_uarts,
.init = s3c6400_init,
.name = name_s3c6400,
@@ -75,7 +87,6 @@
.idcode = S3C6410_CPU_ID,
.idmask = S3C64XX_CPU_MASK,
.map_io = s3c6410_map_io,
- .init_clocks = s3c6410_init_clocks,
.init_uarts = s3c64xx_init_uarts,
.init = s3c6410_init,
.name = name_s3c6410,
@@ -213,8 +224,10 @@
{
/*
* FIXME: there is no better place to put this at the moment
- * (samsung_wdt_reset_init needs clocks)
+ * (s3c64xx_clk_init needs ioremap and must happen before init_time
+ * samsung_wdt_reset_init needs clocks)
*/
+ s3c64xx_clk_init(NULL, xtal_f, xusbxti_f, soc_is_s3c6400(), S3C_VA_SYS);
samsung_wdt_reset_init(S3C_VA_WATCHDOG);
printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
diff --git a/arch/arm/mach-s3c64xx/common.h b/arch/arm/mach-s3c64xx/common.h
index e8f990b..bd3bd56 100644
--- a/arch/arm/mach-s3c64xx/common.h
+++ b/arch/arm/mach-s3c64xx/common.h
@@ -22,21 +22,21 @@
void s3c64xx_init_irq(u32 vic0, u32 vic1);
void s3c64xx_init_io(struct map_desc *mach_desc, int size);
-void s3c64xx_register_clocks(unsigned long xtal, unsigned armclk_limit);
-void s3c64xx_setup_clocks(void);
-
void s3c64xx_restart(enum reboot_mode mode, const char *cmd);
void s3c64xx_init_late(void);
+void s3c64xx_clk_init(struct device_node *np, unsigned long xtal_f,
+ unsigned long xusbxti_f, bool is_s3c6400, void __iomem *reg_base);
+void s3c64xx_set_xtal_freq(unsigned long freq);
+void s3c64xx_set_xusbxti_freq(unsigned long freq);
+
#ifdef CONFIG_CPU_S3C6400
extern int s3c6400_init(void);
extern void s3c6400_init_irq(void);
extern void s3c6400_map_io(void);
-extern void s3c6400_init_clocks(int xtal);
#else
-#define s3c6400_init_clocks NULL
#define s3c6400_map_io NULL
#define s3c6400_init NULL
#endif
@@ -46,10 +46,8 @@
extern int s3c6410_init(void);
extern void s3c6410_init_irq(void);
extern void s3c6410_map_io(void);
-extern void s3c6410_init_clocks(int xtal);
#else
-#define s3c6410_init_clocks NULL
#define s3c6410_map_io NULL
#define s3c6410_init NULL
#endif
diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c
index 759846c..c511dfa 100644
--- a/arch/arm/mach-s3c64xx/dma.c
+++ b/arch/arm/mach-s3c64xx/dma.c
@@ -677,7 +677,7 @@
goto err_map;
}
- clk_enable(dmac->clk);
+ clk_prepare_enable(dmac->clk);
dmac->regs = regs;
dmac->chanbase = chbase;
@@ -711,7 +711,7 @@
return 0;
err_clk:
- clk_disable(dmac->clk);
+ clk_disable_unprepare(dmac->clk);
clk_put(dmac->clk);
err_map:
iounmap(regs);
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-clock.h b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
index 05332b9..4f44aac 100644
--- a/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
@@ -15,145 +15,21 @@
#ifndef __PLAT_REGS_CLOCK_H
#define __PLAT_REGS_CLOCK_H __FILE__
+/*
+ * FIXME: Remove remaining definitions
+ */
+
#define S3C_CLKREG(x) (S3C_VA_SYS + (x))
-#define S3C_APLL_LOCK S3C_CLKREG(0x00)
-#define S3C_MPLL_LOCK S3C_CLKREG(0x04)
-#define S3C_EPLL_LOCK S3C_CLKREG(0x08)
-#define S3C_APLL_CON S3C_CLKREG(0x0C)
-#define S3C_MPLL_CON S3C_CLKREG(0x10)
-#define S3C_EPLL_CON0 S3C_CLKREG(0x14)
-#define S3C_EPLL_CON1 S3C_CLKREG(0x18)
-#define S3C_CLK_SRC S3C_CLKREG(0x1C)
-#define S3C_CLK_DIV0 S3C_CLKREG(0x20)
-#define S3C_CLK_DIV1 S3C_CLKREG(0x24)
-#define S3C_CLK_DIV2 S3C_CLKREG(0x28)
-#define S3C_CLK_OUT S3C_CLKREG(0x2C)
-#define S3C_HCLK_GATE S3C_CLKREG(0x30)
#define S3C_PCLK_GATE S3C_CLKREG(0x34)
-#define S3C_SCLK_GATE S3C_CLKREG(0x38)
-#define S3C_MEM0_GATE S3C_CLKREG(0x3C)
#define S3C6410_CLK_SRC2 S3C_CLKREG(0x10C)
#define S3C_MEM_SYS_CFG S3C_CLKREG(0x120)
-/* CLKDIV0 */
-#define S3C6400_CLKDIV0_PCLK_MASK (0xf << 12)
-#define S3C6400_CLKDIV0_PCLK_SHIFT (12)
-#define S3C6400_CLKDIV0_HCLK2_MASK (0x7 << 9)
-#define S3C6400_CLKDIV0_HCLK2_SHIFT (9)
-#define S3C6400_CLKDIV0_HCLK_MASK (0x1 << 8)
-#define S3C6400_CLKDIV0_HCLK_SHIFT (8)
-#define S3C6400_CLKDIV0_MPLL_MASK (0x1 << 4)
-#define S3C6400_CLKDIV0_MPLL_SHIFT (4)
-
-#define S3C6400_CLKDIV0_ARM_MASK (0x7 << 0)
-#define S3C6410_CLKDIV0_ARM_MASK (0xf << 0)
-#define S3C6400_CLKDIV0_ARM_SHIFT (0)
-
-/* HCLK GATE Registers */
-#define S3C_CLKCON_HCLK_3DSE (1<<31)
-#define S3C_CLKCON_HCLK_UHOST (1<<29)
-#define S3C_CLKCON_HCLK_SECUR (1<<28)
-#define S3C_CLKCON_HCLK_SDMA1 (1<<27)
-#define S3C_CLKCON_HCLK_SDMA0 (1<<26)
-#define S3C_CLKCON_HCLK_IROM (1<<25)
-#define S3C_CLKCON_HCLK_DDR1 (1<<24)
-#define S3C_CLKCON_HCLK_DDR0 (1<<23)
-#define S3C_CLKCON_HCLK_MEM1 (1<<22)
-#define S3C_CLKCON_HCLK_MEM0 (1<<21)
-#define S3C_CLKCON_HCLK_USB (1<<20)
-#define S3C_CLKCON_HCLK_HSMMC2 (1<<19)
-#define S3C_CLKCON_HCLK_HSMMC1 (1<<18)
-#define S3C_CLKCON_HCLK_HSMMC0 (1<<17)
-#define S3C_CLKCON_HCLK_MDP (1<<16)
-#define S3C_CLKCON_HCLK_DHOST (1<<15)
-#define S3C_CLKCON_HCLK_IHOST (1<<14)
-#define S3C_CLKCON_HCLK_DMA1 (1<<13)
-#define S3C_CLKCON_HCLK_DMA0 (1<<12)
-#define S3C_CLKCON_HCLK_JPEG (1<<11)
-#define S3C_CLKCON_HCLK_CAMIF (1<<10)
-#define S3C_CLKCON_HCLK_SCALER (1<<9)
-#define S3C_CLKCON_HCLK_2D (1<<8)
-#define S3C_CLKCON_HCLK_TV (1<<7)
-#define S3C_CLKCON_HCLK_POST0 (1<<5)
-#define S3C_CLKCON_HCLK_ROT (1<<4)
-#define S3C_CLKCON_HCLK_LCD (1<<3)
-#define S3C_CLKCON_HCLK_TZIC (1<<2)
-#define S3C_CLKCON_HCLK_INTC (1<<1)
-#define S3C_CLKCON_HCLK_MFC (1<<0)
-
/* PCLK GATE Registers */
-#define S3C6410_CLKCON_PCLK_I2C1 (1<<27)
-#define S3C6410_CLKCON_PCLK_IIS2 (1<<26)
-#define S3C_CLKCON_PCLK_SKEY (1<<24)
-#define S3C_CLKCON_PCLK_CHIPID (1<<23)
-#define S3C_CLKCON_PCLK_SPI1 (1<<22)
-#define S3C_CLKCON_PCLK_SPI0 (1<<21)
-#define S3C_CLKCON_PCLK_HSIRX (1<<20)
-#define S3C_CLKCON_PCLK_HSITX (1<<19)
-#define S3C_CLKCON_PCLK_GPIO (1<<18)
-#define S3C_CLKCON_PCLK_IIC (1<<17)
-#define S3C_CLKCON_PCLK_IIS1 (1<<16)
-#define S3C_CLKCON_PCLK_IIS0 (1<<15)
-#define S3C_CLKCON_PCLK_AC97 (1<<14)
-#define S3C_CLKCON_PCLK_TZPC (1<<13)
-#define S3C_CLKCON_PCLK_TSADC (1<<12)
-#define S3C_CLKCON_PCLK_KEYPAD (1<<11)
-#define S3C_CLKCON_PCLK_IRDA (1<<10)
-#define S3C_CLKCON_PCLK_PCM1 (1<<9)
-#define S3C_CLKCON_PCLK_PCM0 (1<<8)
-#define S3C_CLKCON_PCLK_PWM (1<<7)
-#define S3C_CLKCON_PCLK_RTC (1<<6)
-#define S3C_CLKCON_PCLK_WDT (1<<5)
#define S3C_CLKCON_PCLK_UART3 (1<<4)
#define S3C_CLKCON_PCLK_UART2 (1<<3)
#define S3C_CLKCON_PCLK_UART1 (1<<2)
#define S3C_CLKCON_PCLK_UART0 (1<<1)
-#define S3C_CLKCON_PCLK_MFC (1<<0)
-
-/* SCLK GATE Registers */
-#define S3C_CLKCON_SCLK_UHOST (1<<30)
-#define S3C_CLKCON_SCLK_MMC2_48 (1<<29)
-#define S3C_CLKCON_SCLK_MMC1_48 (1<<28)
-#define S3C_CLKCON_SCLK_MMC0_48 (1<<27)
-#define S3C_CLKCON_SCLK_MMC2 (1<<26)
-#define S3C_CLKCON_SCLK_MMC1 (1<<25)
-#define S3C_CLKCON_SCLK_MMC0 (1<<24)
-#define S3C_CLKCON_SCLK_SPI1_48 (1<<23)
-#define S3C_CLKCON_SCLK_SPI0_48 (1<<22)
-#define S3C_CLKCON_SCLK_SPI1 (1<<21)
-#define S3C_CLKCON_SCLK_SPI0 (1<<20)
-#define S3C_CLKCON_SCLK_DAC27 (1<<19)
-#define S3C_CLKCON_SCLK_TV27 (1<<18)
-#define S3C_CLKCON_SCLK_SCALER27 (1<<17)
-#define S3C_CLKCON_SCLK_SCALER (1<<16)
-#define S3C_CLKCON_SCLK_LCD27 (1<<15)
-#define S3C_CLKCON_SCLK_LCD (1<<14)
-#define S3C6400_CLKCON_SCLK_POST1_27 (1<<13)
-#define S3C6410_CLKCON_FIMC (1<<13)
-#define S3C_CLKCON_SCLK_POST0_27 (1<<12)
-#define S3C6400_CLKCON_SCLK_POST1 (1<<11)
-#define S3C6410_CLKCON_SCLK_AUDIO2 (1<<11)
-#define S3C_CLKCON_SCLK_POST0 (1<<10)
-#define S3C_CLKCON_SCLK_AUDIO1 (1<<9)
-#define S3C_CLKCON_SCLK_AUDIO0 (1<<8)
-#define S3C_CLKCON_SCLK_SECUR (1<<7)
-#define S3C_CLKCON_SCLK_IRDA (1<<6)
-#define S3C_CLKCON_SCLK_UART (1<<5)
-#define S3C_CLKCON_SCLK_ONENAND (1<<4)
-#define S3C_CLKCON_SCLK_MFC (1<<3)
-#define S3C_CLKCON_SCLK_CAM (1<<2)
-#define S3C_CLKCON_SCLK_JPEG (1<<1)
-
-/* CLKSRC */
-
-#define S3C6400_CLKSRC_APLL_MOUT (1 << 0)
-#define S3C6400_CLKSRC_MPLL_MOUT (1 << 1)
-#define S3C6400_CLKSRC_EPLL_MOUT (1 << 2)
-#define S3C6400_CLKSRC_APLL_MOUT_SHIFT (0)
-#define S3C6400_CLKSRC_MPLL_MOUT_SHIFT (1)
-#define S3C6400_CLKSRC_EPLL_MOUT_SHIFT (2)
-#define S3C6400_CLKSRC_MFC (1 << 4)
/* MEM_SYS_CFG */
#define MEM_SYS_CFG_INDEP_CF 0x4000
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index 35e3f54..d266dd5 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -207,7 +207,7 @@
static void __init anw6410_map_io(void)
{
s3c64xx_init_io(anw6410_iodesc, ARRAY_SIZE(anw6410_iodesc));
- s3c24xx_init_clocks(12000000);
+ s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(anw6410_uartcfgs, ARRAY_SIZE(anw6410_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index eb8e5a1..1a911df 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -743,7 +743,7 @@
static void __init crag6410_map_io(void)
{
s3c64xx_init_io(NULL, 0);
- s3c24xx_init_clocks(12000000);
+ s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(crag6410_uartcfgs, ARRAY_SIZE(crag6410_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index f39569e..e806404 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -247,7 +247,7 @@
static void __init hmt_map_io(void)
{
s3c64xx_init_io(hmt_iodesc, ARRAY_SIZE(hmt_iodesc));
- s3c24xx_init_clocks(12000000);
+ s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(hmt_uartcfgs, ARRAY_SIZE(hmt_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index fc043e3..58d46a3 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -231,7 +231,7 @@
u32 tmp;
s3c64xx_init_io(NULL, 0);
- s3c24xx_init_clocks(12000000);
+ s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(mini6410_uartcfgs, ARRAY_SIZE(mini6410_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index 7e2c390..2067b0b 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -86,7 +86,7 @@
static void __init ncp_map_io(void)
{
s3c64xx_init_io(ncp_iodesc, ARRAY_SIZE(ncp_iodesc));
- s3c24xx_init_clocks(12000000);
+ s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(ncp_uartcfgs, ARRAY_SIZE(ncp_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index 86d980b..0f47237 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -337,13 +337,6 @@
return ret;
}
-static int __init smartq_usb_otg_init(void)
-{
- clk_xusbxti.rate = 12000000;
-
- return 0;
-}
-
static int __init smartq_wifi_init(void)
{
int ret;
@@ -377,7 +370,8 @@
void __init smartq_map_io(void)
{
s3c64xx_init_io(smartq_iodesc, ARRAY_SIZE(smartq_iodesc));
- s3c24xx_init_clocks(12000000);
+ s3c64xx_set_xtal_freq(12000000);
+ s3c64xx_set_xusbxti_freq(12000000);
s3c24xx_init_uarts(smartq_uartcfgs, ARRAY_SIZE(smartq_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
@@ -399,7 +393,6 @@
WARN_ON(smartq_lcd_setup_gpio());
WARN_ON(smartq_power_off_init());
WARN_ON(smartq_usb_host_init());
- WARN_ON(smartq_usb_otg_init());
WARN_ON(smartq_wifi_init());
platform_add_devices(smartq_devices, ARRAY_SIZE(smartq_devices));
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index d70c084..27381cf 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -65,7 +65,7 @@
static void __init smdk6400_map_io(void)
{
s3c64xx_init_io(smdk6400_iodesc, ARRAY_SIZE(smdk6400_iodesc));
- s3c24xx_init_clocks(12000000);
+ s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(smdk6400_uartcfgs, ARRAY_SIZE(smdk6400_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index d90b450..2a7b32c 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -634,7 +634,7 @@
u32 tmp;
s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc));
- s3c24xx_init_clocks(12000000);
+ s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
index 6a1f91f..8cdb824 100644
--- a/arch/arm/mach-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -194,29 +194,8 @@
#endif
static struct sleep_save core_save[] = {
- SAVE_ITEM(S3C_APLL_LOCK),
- SAVE_ITEM(S3C_MPLL_LOCK),
- SAVE_ITEM(S3C_EPLL_LOCK),
- SAVE_ITEM(S3C_CLK_SRC),
- SAVE_ITEM(S3C_CLK_DIV0),
- SAVE_ITEM(S3C_CLK_DIV1),
- SAVE_ITEM(S3C_CLK_DIV2),
- SAVE_ITEM(S3C_CLK_OUT),
- SAVE_ITEM(S3C_HCLK_GATE),
- SAVE_ITEM(S3C_PCLK_GATE),
- SAVE_ITEM(S3C_SCLK_GATE),
- SAVE_ITEM(S3C_MEM0_GATE),
-
- SAVE_ITEM(S3C_EPLL_CON1),
- SAVE_ITEM(S3C_EPLL_CON0),
-
SAVE_ITEM(S3C64XX_MEM0DRVCON),
SAVE_ITEM(S3C64XX_MEM1DRVCON),
-
-#ifndef CONFIG_CPU_FREQ
- SAVE_ITEM(S3C_APLL_CON),
- SAVE_ITEM(S3C_MPLL_CON),
-#endif
};
static struct sleep_save misc_save[] = {
diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c
index 4869714..331fe8e 100644
--- a/arch/arm/mach-s3c64xx/s3c6400.c
+++ b/arch/arm/mach-s3c64xx/s3c6400.c
@@ -58,12 +58,6 @@
s3c64xx_onenand1_setname("s3c6400-onenand");
}
-void __init s3c6400_init_clocks(int xtal)
-{
- s3c64xx_register_clocks(xtal, S3C6400_CLKDIV0_ARM_MASK);
- s3c64xx_setup_clocks();
-}
-
void __init s3c6400_init_irq(void)
{
/* VIC0 does not have IRQS 5..7,
diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c
index 31c29fd..7e6fa12 100644
--- a/arch/arm/mach-s3c64xx/s3c6410.c
+++ b/arch/arm/mach-s3c64xx/s3c6410.c
@@ -62,13 +62,6 @@
s3c_cfcon_setname("s3c64xx-pata");
}
-void __init s3c6410_init_clocks(int xtal)
-{
- printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
- s3c64xx_register_clocks(xtal, S3C6410_CLKDIV0_ARM_MASK);
- s3c64xx_setup_clocks();
-}
-
void __init s3c6410_init_irq(void)
{
/* VIC0 is missing IRQ7, VIC1 is fully populated. */
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 1f94c31..5dd5f9f 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -101,12 +101,24 @@
select SH_CLK_CPG
select RENESAS_IRQC
+config ARCH_R8A7791
+ bool "R-Car M2 (R8A77910)"
+ select ARM_GIC
+ select CPU_V7
+ select SH_CLK_CPG
+
config ARCH_EMEV2
bool "Emma Mobile EV2"
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select CPU_V7
+config ARCH_R7S72100
+ bool "RZ/A1H (R7S72100)"
+ select ARM_GIC
+ select CPU_V7
+ select SH_CLK_CPG
+
comment "SH-Mobile Board Type"
config MACH_APE6EVM
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 2705bfa..f2d40ed 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -15,7 +15,10 @@
obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o
obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o
obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o
+obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o setup-rcar-gen2.o
+obj-$(CONFIG_ARCH_R8A7791) += setup-r8a7791.o setup-rcar-gen2.o
obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o
+obj-$(CONFIG_ARCH_R7S72100) += setup-r7s72100.o
# Clock objects
ifndef CONFIG_COMMON_CLK
@@ -27,13 +30,17 @@
obj-$(CONFIG_ARCH_R8A7778) += clock-r8a7778.o
obj-$(CONFIG_ARCH_R8A7779) += clock-r8a7779.o
obj-$(CONFIG_ARCH_R8A7790) += clock-r8a7790.o
+obj-$(CONFIG_ARCH_R8A7791) += clock-r8a7791.o
obj-$(CONFIG_ARCH_EMEV2) += clock-emev2.o
+obj-$(CONFIG_ARCH_R7S72100) += clock-r7s72100.o
endif
# SMP objects
smp-y := platsmp.o headsmp.o
smp-$(CONFIG_ARCH_SH73A0) += smp-sh73a0.o headsmp-scu.o platsmp-scu.o
smp-$(CONFIG_ARCH_R8A7779) += smp-r8a7779.o headsmp-scu.o platsmp-scu.o
+smp-$(CONFIG_ARCH_R8A7790) += smp-r8a7790.o platsmp-apmu.o
+smp-$(CONFIG_ARCH_R8A7791) += smp-r8a7791.o platsmp-apmu.o
smp-$(CONFIG_ARCH_EMEV2) += smp-emev2.o headsmp-scu.o platsmp-scu.o
# IRQ objects
diff --git a/arch/arm/mach-shmobile/board-ape6evm-reference.c b/arch/arm/mach-shmobile/board-ape6evm-reference.c
index a23fa71..3276afc 100644
--- a/arch/arm/mach-shmobile/board-ape6evm-reference.c
+++ b/arch/arm/mach-shmobile/board-ape6evm-reference.c
@@ -57,7 +57,7 @@
};
DT_MACHINE_START(APE6EVM_DT, "ape6evm")
- .init_early = r8a73a4_init_delay,
+ .init_early = r8a73a4_init_early,
.init_machine = ape6evm_add_standard_devices,
.dt_compat = ape6evm_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-ape6evm.c b/arch/arm/mach-shmobile/board-ape6evm.c
index 24b87eea..d36e23f 100644
--- a/arch/arm/mach-shmobile/board-ape6evm.c
+++ b/arch/arm/mach-shmobile/board-ape6evm.c
@@ -240,7 +240,7 @@
};
DT_MACHINE_START(APE6EVM_DT, "ape6evm")
- .init_early = r8a73a4_init_delay,
+ .init_early = r8a73a4_init_early,
.init_machine = ape6evm_add_standard_devices,
.dt_compat = ape6evm_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-lager-reference.c b/arch/arm/mach-shmobile/board-lager-reference.c
index 9c316a1..1a1a4a8 100644
--- a/arch/arm/mach-shmobile/board-lager-reference.c
+++ b/arch/arm/mach-shmobile/board-lager-reference.c
@@ -38,8 +38,9 @@
};
DT_MACHINE_START(LAGER_DT, "lager")
- .init_early = r8a7790_init_delay,
+ .smp = smp_ops(r8a7790_smp_ops),
+ .init_early = r8a7790_init_early,
+ .init_time = rcar_gen2_timer_init,
.init_machine = lager_add_standard_devices,
- .init_time = r8a7790_timer_init,
.dt_compat = lager_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c
index 5930af8..4e040e4 100644
--- a/arch/arm/mach-shmobile/board-lager.c
+++ b/arch/arm/mach-shmobile/board-lager.c
@@ -186,8 +186,9 @@
};
DT_MACHINE_START(LAGER_DT, "lager")
- .init_early = r8a7790_init_delay,
- .init_time = r8a7790_timer_init,
+ .smp = smp_ops(r8a7790_smp_ops),
+ .init_early = r8a7790_init_early,
+ .init_time = rcar_gen2_timer_init,
.init_machine = lager_init,
.dt_compat = lager_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/clock-r7s72100.c b/arch/arm/mach-shmobile/clock-r7s72100.c
new file mode 100644
index 0000000..4aba20c
--- /dev/null
+++ b/arch/arm/mach-shmobile/clock-r7s72100.c
@@ -0,0 +1,202 @@
+/*
+ * r7a72100 clock framework support
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2012 Phil Edworthy
+ * Copyright (C) 2011 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/sh_clk.h>
+#include <linux/clkdev.h>
+#include <mach/common.h>
+#include <mach/r7s72100.h>
+
+/* registers */
+#define FRQCR 0xfcfe0010
+#define FRQCR2 0xfcfe0014
+#define STBCR3 0xfcfe0420
+#define STBCR4 0xfcfe0424
+
+#define PLL_RATE 30
+
+static struct clk_mapping cpg_mapping = {
+ .phys = 0xfcfe0000,
+ .len = 0x1000,
+};
+
+/* Fixed 32 KHz root clock for RTC */
+static struct clk r_clk = {
+ .rate = 32768,
+};
+
+/*
+ * Default rate for the root input clock, reset this with clk_set_rate()
+ * from the platform code.
+ */
+static struct clk extal_clk = {
+ .rate = 13330000,
+ .mapping = &cpg_mapping,
+};
+
+static unsigned long pll_recalc(struct clk *clk)
+{
+ return clk->parent->rate * PLL_RATE;
+}
+
+static struct sh_clk_ops pll_clk_ops = {
+ .recalc = pll_recalc,
+};
+
+static struct clk pll_clk = {
+ .ops = &pll_clk_ops,
+ .parent = &extal_clk,
+ .flags = CLK_ENABLE_ON_INIT,
+};
+
+static unsigned long bus_recalc(struct clk *clk)
+{
+ return clk->parent->rate * 2 / 3;
+}
+
+static struct sh_clk_ops bus_clk_ops = {
+ .recalc = bus_recalc,
+};
+
+static struct clk bus_clk = {
+ .ops = &bus_clk_ops,
+ .parent = &pll_clk,
+ .flags = CLK_ENABLE_ON_INIT,
+};
+
+static unsigned long peripheral0_recalc(struct clk *clk)
+{
+ return clk->parent->rate / 12;
+}
+
+static struct sh_clk_ops peripheral0_clk_ops = {
+ .recalc = peripheral0_recalc,
+};
+
+static struct clk peripheral0_clk = {
+ .ops = &peripheral0_clk_ops,
+ .parent = &pll_clk,
+ .flags = CLK_ENABLE_ON_INIT,
+};
+
+static unsigned long peripheral1_recalc(struct clk *clk)
+{
+ return clk->parent->rate / 6;
+}
+
+static struct sh_clk_ops peripheral1_clk_ops = {
+ .recalc = peripheral1_recalc,
+};
+
+static struct clk peripheral1_clk = {
+ .ops = &peripheral1_clk_ops,
+ .parent = &pll_clk,
+ .flags = CLK_ENABLE_ON_INIT,
+};
+
+struct clk *main_clks[] = {
+ &r_clk,
+ &extal_clk,
+ &pll_clk,
+ &bus_clk,
+ &peripheral0_clk,
+ &peripheral1_clk,
+};
+
+static int div2[] = { 1, 3, 0, 3 }; /* 1, 2/3, reserve, 1/3 */
+static int multipliers[] = { 1, 2, 1, 1 };
+
+static struct clk_div_mult_table div4_div_mult_table = {
+ .divisors = div2,
+ .nr_divisors = ARRAY_SIZE(div2),
+ .multipliers = multipliers,
+ .nr_multipliers = ARRAY_SIZE(multipliers),
+};
+
+static struct clk_div4_table div4_table = {
+ .div_mult_table = &div4_div_mult_table,
+};
+
+enum { DIV4_I,
+ DIV4_NR };
+
+#define DIV4(_reg, _bit, _mask, _flags) \
+ SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
+
+/* The mask field specifies the div2 entries that are valid */
+struct clk div4_clks[DIV4_NR] = {
+ [DIV4_I] = DIV4(FRQCR, 8, 0xB, CLK_ENABLE_REG_16BIT
+ | CLK_ENABLE_ON_INIT),
+};
+
+enum { MSTP47, MSTP46, MSTP45, MSTP44, MSTP43, MSTP42, MSTP41, MSTP40,
+ MSTP33, MSTP_NR };
+
+static struct clk mstp_clks[MSTP_NR] = {
+ [MSTP47] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 7, 0), /* SCIF0 */
+ [MSTP46] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 6, 0), /* SCIF1 */
+ [MSTP45] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 5, 0), /* SCIF2 */
+ [MSTP44] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 4, 0), /* SCIF3 */
+ [MSTP43] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 3, 0), /* SCIF4 */
+ [MSTP42] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 2, 0), /* SCIF5 */
+ [MSTP41] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 1, 0), /* SCIF6 */
+ [MSTP40] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 0, 0), /* SCIF7 */
+ [MSTP33] = SH_CLK_MSTP8(&peripheral0_clk, STBCR3, 3, 0), /* MTU2 */
+};
+
+static struct clk_lookup lookups[] = {
+ /* main clocks */
+ CLKDEV_CON_ID("rclk", &r_clk),
+ CLKDEV_CON_ID("extal", &extal_clk),
+ CLKDEV_CON_ID("pll_clk", &pll_clk),
+ CLKDEV_CON_ID("peripheral_clk", &peripheral1_clk),
+
+ /* DIV4 clocks */
+ CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
+
+ /* MSTP clocks */
+ CLKDEV_ICK_ID("sci_fck", "sh-sci.0", &mstp_clks[MSTP47]),
+ CLKDEV_ICK_ID("sci_fck", "sh-sci.1", &mstp_clks[MSTP46]),
+ CLKDEV_ICK_ID("sci_fck", "sh-sci.2", &mstp_clks[MSTP45]),
+ CLKDEV_ICK_ID("sci_fck", "sh-sci.3", &mstp_clks[MSTP44]),
+ CLKDEV_ICK_ID("sci_fck", "sh-sci.4", &mstp_clks[MSTP43]),
+ CLKDEV_ICK_ID("sci_fck", "sh-sci.5", &mstp_clks[MSTP42]),
+ CLKDEV_ICK_ID("sci_fck", "sh-sci.6", &mstp_clks[MSTP41]),
+ CLKDEV_ICK_ID("sci_fck", "sh-sci.7", &mstp_clks[MSTP40]),
+};
+
+void __init r7s72100_clock_init(void)
+{
+ int k, ret = 0;
+
+ for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+ ret = clk_register(main_clks[k]);
+
+ clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+ if (!ret)
+ ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
+
+ if (!ret)
+ ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
+
+ if (!ret)
+ shmobile_clk_init();
+ else
+ panic("failed to setup rza1 clocks\n");
+}
diff --git a/arch/arm/mach-shmobile/clock-r8a73a4.c b/arch/arm/mach-shmobile/clock-r8a73a4.c
index 5bd2e85..571409b 100644
--- a/arch/arm/mach-shmobile/clock-r8a73a4.c
+++ b/arch/arm/mach-shmobile/clock-r8a73a4.c
@@ -504,7 +504,7 @@
/* MSTP */
enum {
- MSTP217, MSTP216, MSTP207, MSTP206, MSTP204, MSTP203,
+ MSTP218, MSTP217, MSTP216, MSTP207, MSTP206, MSTP204, MSTP203,
MSTP329, MSTP323, MSTP318, MSTP317, MSTP316,
MSTP315, MSTP314, MSTP313, MSTP312, MSTP305, MSTP300,
MSTP411, MSTP410, MSTP409,
@@ -519,6 +519,7 @@
[MSTP207] = SH_CLK_MSTP32(&div6_clks[DIV6_MP], SMSTPCR2, 7, 0), /* SCIFB1 */
[MSTP216] = SH_CLK_MSTP32(&div6_clks[DIV6_MP], SMSTPCR2, 16, 0), /* SCIFB2 */
[MSTP217] = SH_CLK_MSTP32(&div6_clks[DIV6_MP], SMSTPCR2, 17, 0), /* SCIFB3 */
+ [MSTP218] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* DMAC */
[MSTP300] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 0, 0), /* IIC2 */
[MSTP305] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC1],SMSTPCR3, 5, 0), /* MMCIF1 */
[MSTP312] = SH_CLK_MSTP32(&div6_clks[DIV6_SDHI2],SMSTPCR3, 12, 0), /* SDHI2 */
@@ -578,6 +579,8 @@
CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP207]),
CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]),
CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP217]),
+ CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]),
+ CLKDEV_DEV_ID("e6700020.dma-controller", &mstp_clks[MSTP218]),
CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
CLKDEV_DEV_ID("e6520000.i2c", &mstp_clks[MSTP300]),
CLKDEV_DEV_ID("sh_mmcif.1", &mstp_clks[MSTP305]),
diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c b/arch/arm/mach-shmobile/clock-r8a7778.c
index c4bf2d8..fb6af83 100644
--- a/arch/arm/mach-shmobile/clock-r8a7778.c
+++ b/arch/arm/mach-shmobile/clock-r8a7778.c
@@ -69,6 +69,15 @@
.mapping = &cpg_mapping,
};
+static struct clk audio_clk_a = {
+};
+
+static struct clk audio_clk_b = {
+};
+
+static struct clk audio_clk_c = {
+};
+
/*
* clock ratio of these clock will be updated
* on r8a7778_clock_init()
@@ -100,18 +109,23 @@
&p_clk,
&g_clk,
&z_clk,
+ &audio_clk_a,
+ &audio_clk_b,
+ &audio_clk_c,
};
enum {
MSTP331,
MSTP323, MSTP322, MSTP321,
+ MSTP311, MSTP310,
+ MSTP309, MSTP308, MSTP307,
MSTP114,
MSTP110, MSTP109,
MSTP100,
MSTP030,
MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021,
- MSTP016, MSTP015,
- MSTP007,
+ MSTP016, MSTP015, MSTP012, MSTP011, MSTP010,
+ MSTP009, MSTP008, MSTP007,
MSTP_NR };
static struct clk mstp_clks[MSTP_NR] = {
@@ -119,6 +133,11 @@
[MSTP323] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 23, 0), /* SDHI0 */
[MSTP322] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 22, 0), /* SDHI1 */
[MSTP321] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 21, 0), /* SDHI2 */
+ [MSTP311] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 11, 0), /* SSI4 */
+ [MSTP310] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 10, 0), /* SSI5 */
+ [MSTP309] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 9, 0), /* SSI6 */
+ [MSTP308] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 8, 0), /* SSI7 */
+ [MSTP307] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 7, 0), /* SSI8 */
[MSTP114] = SH_CLK_MSTP32(&p_clk, MSTPCR1, 14, 0), /* Ether */
[MSTP110] = SH_CLK_MSTP32(&s_clk, MSTPCR1, 10, 0), /* VIN0 */
[MSTP109] = SH_CLK_MSTP32(&s_clk, MSTPCR1, 9, 0), /* VIN1 */
@@ -135,11 +154,20 @@
[MSTP021] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 21, 0), /* SCIF5 */
[MSTP016] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 16, 0), /* TMU0 */
[MSTP015] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 15, 0), /* TMU1 */
+ [MSTP012] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 12, 0), /* SSI0 */
+ [MSTP011] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 11, 0), /* SSI1 */
+ [MSTP010] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 10, 0), /* SSI2 */
+ [MSTP009] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 9, 0), /* SSI3 */
+ [MSTP008] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 8, 0), /* SRU */
[MSTP007] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 7, 0), /* HSPI */
};
static struct clk_lookup lookups[] = {
/* main */
+ CLKDEV_CON_ID("audio_clk_a", &audio_clk_a),
+ CLKDEV_CON_ID("audio_clk_b", &audio_clk_b),
+ CLKDEV_CON_ID("audio_clk_c", &audio_clk_c),
+ CLKDEV_CON_ID("audio_clk_internal", &s1_clk),
CLKDEV_CON_ID("shyway_clk", &s_clk),
CLKDEV_CON_ID("peripheral_clk", &p_clk),
@@ -153,6 +181,7 @@
CLKDEV_DEV_ID("r8a7778-vin.1", &mstp_clks[MSTP109]), /* VIN1 */
CLKDEV_DEV_ID("ehci-platform", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */
CLKDEV_DEV_ID("ohci-platform", &mstp_clks[MSTP100]), /* USB OHCI port0/1 */
+ CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP100]), /* USB FUNC */
CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */
CLKDEV_DEV_ID("i2c-rcar.1", &mstp_clks[MSTP029]), /* I2C1 */
CLKDEV_DEV_ID("i2c-rcar.2", &mstp_clks[MSTP028]), /* I2C2 */
@@ -168,6 +197,17 @@
CLKDEV_DEV_ID("sh-hspi.0", &mstp_clks[MSTP007]), /* HSPI0 */
CLKDEV_DEV_ID("sh-hspi.1", &mstp_clks[MSTP007]), /* HSPI1 */
CLKDEV_DEV_ID("sh-hspi.2", &mstp_clks[MSTP007]), /* HSPI2 */
+ CLKDEV_DEV_ID("rcar_sound", &mstp_clks[MSTP008]), /* SRU */
+
+ CLKDEV_ICK_ID("ssi.0", "rcar_sound", &mstp_clks[MSTP012]),
+ CLKDEV_ICK_ID("ssi.1", "rcar_sound", &mstp_clks[MSTP011]),
+ CLKDEV_ICK_ID("ssi.2", "rcar_sound", &mstp_clks[MSTP010]),
+ CLKDEV_ICK_ID("ssi.3", "rcar_sound", &mstp_clks[MSTP009]),
+ CLKDEV_ICK_ID("ssi.4", "rcar_sound", &mstp_clks[MSTP311]),
+ CLKDEV_ICK_ID("ssi.5", "rcar_sound", &mstp_clks[MSTP310]),
+ CLKDEV_ICK_ID("ssi.6", "rcar_sound", &mstp_clks[MSTP309]),
+ CLKDEV_ICK_ID("ssi.7", "rcar_sound", &mstp_clks[MSTP308]),
+ CLKDEV_ICK_ID("ssi.8", "rcar_sound", &mstp_clks[MSTP307]),
};
void __init r8a7778_clock_init(void)
diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c
index bd6ad92..1f7080f 100644
--- a/arch/arm/mach-shmobile/clock-r8a7779.c
+++ b/arch/arm/mach-shmobile/clock-r8a7779.c
@@ -200,7 +200,7 @@
CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */
CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP321]), /* SDHI2 */
CLKDEV_DEV_ID("sh_mobile_sdhi.3", &mstp_clks[MSTP320]), /* SDHI3 */
- CLKDEV_DEV_ID("rcar-du.0", &mstp_clks[MSTP103]), /* DU */
+ CLKDEV_DEV_ID("rcar-du-r8a7779", &mstp_clks[MSTP103]), /* DU */
};
void __init r8a7779_clock_init(void)
diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c
index fc36d3d..a64f965 100644
--- a/arch/arm/mach-shmobile/clock-r8a7790.c
+++ b/arch/arm/mach-shmobile/clock-r8a7790.c
@@ -52,6 +52,7 @@
#define SMSTPCR5 0xe6150144
#define SMSTPCR7 0xe615014c
#define SMSTPCR8 0xe6150990
+#define SMSTPCR9 0xe6150994
#define SDCKCR 0xE6150074
#define SD2CKCR 0xE6150078
@@ -181,8 +182,9 @@
/* MSTP */
enum {
+ MSTP931, MSTP930, MSTP929, MSTP928,
MSTP813,
- MSTP721, MSTP720,
+ MSTP726, MSTP725, MSTP724, MSTP723, MSTP722, MSTP721, MSTP720,
MSTP717, MSTP716,
MSTP522,
MSTP315, MSTP314, MSTP313, MSTP312, MSTP311, MSTP305, MSTP304,
@@ -192,7 +194,16 @@
};
static struct clk mstp_clks[MSTP_NR] = {
+ [MSTP931] = SH_CLK_MSTP32(&hp_clk, SMSTPCR9, 31, 0), /* I2C0 */
+ [MSTP930] = SH_CLK_MSTP32(&hp_clk, SMSTPCR9, 30, 0), /* I2C1 */
+ [MSTP929] = SH_CLK_MSTP32(&hp_clk, SMSTPCR9, 29, 0), /* I2C2 */
+ [MSTP928] = SH_CLK_MSTP32(&hp_clk, SMSTPCR9, 28, 0), /* I2C3 */
[MSTP813] = SH_CLK_MSTP32(&p_clk, SMSTPCR8, 13, 0), /* Ether */
+ [MSTP726] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 26, 0), /* LVDS0 */
+ [MSTP725] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 25, 0), /* LVDS1 */
+ [MSTP724] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 24, 0), /* DU0 */
+ [MSTP723] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 23, 0), /* DU1 */
+ [MSTP722] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 22, 0), /* DU2 */
[MSTP721] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 21, 0), /* SCIF0 */
[MSTP720] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 20, 0), /* SCIF1 */
[MSTP717] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 17, 0), /* HSCIF0 */
@@ -251,6 +262,11 @@
CLKDEV_CON_ID("ssprs", &div6_clks[DIV6_SSPRS]),
/* MSTP */
+ CLKDEV_ICK_ID("lvds.0", "rcar-du-r8a7790", &mstp_clks[MSTP726]),
+ CLKDEV_ICK_ID("lvds.1", "rcar-du-r8a7790", &mstp_clks[MSTP725]),
+ CLKDEV_ICK_ID("du.0", "rcar-du-r8a7790", &mstp_clks[MSTP724]),
+ CLKDEV_ICK_ID("du.1", "rcar-du-r8a7790", &mstp_clks[MSTP723]),
+ CLKDEV_ICK_ID("du.2", "rcar-du-r8a7790", &mstp_clks[MSTP722]),
CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]),
CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]),
CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]),
@@ -261,6 +277,10 @@
CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP720]),
CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP717]),
CLKDEV_DEV_ID("sh-sci.9", &mstp_clks[MSTP716]),
+ CLKDEV_DEV_ID("e6508000.i2c", &mstp_clks[MSTP931]),
+ CLKDEV_DEV_ID("e6518000.i2c", &mstp_clks[MSTP930]),
+ CLKDEV_DEV_ID("e6530000.i2c", &mstp_clks[MSTP929]),
+ CLKDEV_DEV_ID("e6540000.i2c", &mstp_clks[MSTP928]),
CLKDEV_DEV_ID("r8a7790-ether", &mstp_clks[MSTP813]),
CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
CLKDEV_DEV_ID("ee200000.mmcif", &mstp_clks[MSTP315]),
@@ -290,7 +310,7 @@
void __init r8a7790_clock_init(void)
{
- u32 mode = r8a7790_read_mode_pins();
+ u32 mode = rcar_gen2_read_mode_pins();
int k, ret = 0;
switch (mode & (MD(14) | MD(13))) {
diff --git a/arch/arm/mach-shmobile/clock-r8a7791.c b/arch/arm/mach-shmobile/clock-r8a7791.c
new file mode 100644
index 0000000..c9a26f1
--- /dev/null
+++ b/arch/arm/mach-shmobile/clock-r8a7791.c
@@ -0,0 +1,237 @@
+/*
+ * r8a7791 clock framework support
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/sh_clk.h>
+#include <linux/clkdev.h>
+#include <mach/clock.h>
+#include <mach/common.h>
+
+/*
+ * MD EXTAL PLL0 PLL1 PLL3
+ * 14 13 19 (MHz) *1 *1
+ *---------------------------------------------------
+ * 0 0 0 15 x 1 x172/2 x208/2 x106
+ * 0 0 1 15 x 1 x172/2 x208/2 x88
+ * 0 1 0 20 x 1 x130/2 x156/2 x80
+ * 0 1 1 20 x 1 x130/2 x156/2 x66
+ * 1 0 0 26 / 2 x200/2 x240/2 x122
+ * 1 0 1 26 / 2 x200/2 x240/2 x102
+ * 1 1 0 30 / 2 x172/2 x208/2 x106
+ * 1 1 1 30 / 2 x172/2 x208/2 x88
+ *
+ * *1 : Table 7.6 indicates VCO ouput (PLLx = VCO/2)
+ * see "p1 / 2" on R8A7791_CLOCK_ROOT() below
+ */
+
+#define MD(nr) (1 << nr)
+
+#define CPG_BASE 0xe6150000
+#define CPG_LEN 0x1000
+
+#define SMSTPCR0 0xE6150130
+#define SMSTPCR1 0xE6150134
+#define SMSTPCR2 0xe6150138
+#define SMSTPCR3 0xE615013C
+#define SMSTPCR5 0xE6150144
+#define SMSTPCR7 0xe615014c
+#define SMSTPCR8 0xE6150990
+#define SMSTPCR9 0xE6150994
+#define SMSTPCR10 0xE6150998
+#define SMSTPCR11 0xE615099C
+
+#define MODEMR 0xE6160060
+#define SDCKCR 0xE6150074
+#define SD2CKCR 0xE6150078
+#define SD3CKCR 0xE615007C
+#define MMC0CKCR 0xE6150240
+#define MMC1CKCR 0xE6150244
+#define SSPCKCR 0xE6150248
+#define SSPRSCKCR 0xE615024C
+
+static struct clk_mapping cpg_mapping = {
+ .phys = CPG_BASE,
+ .len = CPG_LEN,
+};
+
+static struct clk extal_clk = {
+ /* .rate will be updated on r8a7791_clock_init() */
+ .mapping = &cpg_mapping,
+};
+
+static struct sh_clk_ops followparent_clk_ops = {
+ .recalc = followparent_recalc,
+};
+
+static struct clk main_clk = {
+ /* .parent will be set r8a73a4_clock_init */
+ .ops = &followparent_clk_ops,
+};
+
+/*
+ * clock ratio of these clock will be updated
+ * on r8a7791_clock_init()
+ */
+SH_FIXED_RATIO_CLK_SET(pll1_clk, main_clk, 1, 1);
+SH_FIXED_RATIO_CLK_SET(pll3_clk, main_clk, 1, 1);
+
+/* fixed ratio clock */
+SH_FIXED_RATIO_CLK_SET(extal_div2_clk, extal_clk, 1, 2);
+SH_FIXED_RATIO_CLK_SET(cp_clk, extal_clk, 1, 2);
+
+SH_FIXED_RATIO_CLK_SET(pll1_div2_clk, pll1_clk, 1, 2);
+SH_FIXED_RATIO_CLK_SET(hp_clk, pll1_clk, 1, 12);
+SH_FIXED_RATIO_CLK_SET(p_clk, pll1_clk, 1, 24);
+SH_FIXED_RATIO_CLK_SET(rclk_clk, pll1_clk, 1, (48 * 1024));
+SH_FIXED_RATIO_CLK_SET(mp_clk, pll1_div2_clk, 1, 15);
+
+static struct clk *main_clks[] = {
+ &extal_clk,
+ &extal_div2_clk,
+ &main_clk,
+ &pll1_clk,
+ &pll1_div2_clk,
+ &pll3_clk,
+ &hp_clk,
+ &p_clk,
+ &rclk_clk,
+ &mp_clk,
+ &cp_clk,
+};
+
+/* MSTP */
+enum {
+ MSTP721, MSTP720,
+ MSTP719, MSTP718, MSTP715, MSTP714,
+ MSTP216, MSTP207, MSTP206,
+ MSTP204, MSTP203, MSTP202, MSTP1105, MSTP1106, MSTP1107,
+ MSTP124,
+ MSTP_NR
+};
+
+static struct clk mstp_clks[MSTP_NR] = {
+ [MSTP721] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 21, 0), /* SCIF0 */
+ [MSTP720] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 20, 0), /* SCIF1 */
+ [MSTP719] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 19, 0), /* SCIF2 */
+ [MSTP718] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 18, 0), /* SCIF3 */
+ [MSTP715] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 15, 0), /* SCIF4 */
+ [MSTP714] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 14, 0), /* SCIF5 */
+ [MSTP216] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 16, 0), /* SCIFB2 */
+ [MSTP207] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 7, 0), /* SCIFB1 */
+ [MSTP206] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 6, 0), /* SCIFB0 */
+ [MSTP204] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 4, 0), /* SCIFA0 */
+ [MSTP203] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 3, 0), /* SCIFA1 */
+ [MSTP202] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 2, 0), /* SCIFA2 */
+ [MSTP1105] = SH_CLK_MSTP32(&mp_clk, SMSTPCR11, 5, 0), /* SCIFA3 */
+ [MSTP1106] = SH_CLK_MSTP32(&mp_clk, SMSTPCR11, 6, 0), /* SCIFA4 */
+ [MSTP1107] = SH_CLK_MSTP32(&mp_clk, SMSTPCR11, 7, 0), /* SCIFA5 */
+ [MSTP124] = SH_CLK_MSTP32(&rclk_clk, SMSTPCR1, 24, 0), /* CMT0 */
+};
+
+static struct clk_lookup lookups[] = {
+
+ /* main clocks */
+ CLKDEV_CON_ID("extal", &extal_clk),
+ CLKDEV_CON_ID("extal_div2", &extal_div2_clk),
+ CLKDEV_CON_ID("main", &main_clk),
+ CLKDEV_CON_ID("pll1", &pll1_clk),
+ CLKDEV_CON_ID("pll1_div2", &pll1_div2_clk),
+ CLKDEV_CON_ID("pll3", &pll3_clk),
+ CLKDEV_CON_ID("hp", &hp_clk),
+ CLKDEV_CON_ID("p", &p_clk),
+ CLKDEV_CON_ID("rclk", &rclk_clk),
+ CLKDEV_CON_ID("mp", &mp_clk),
+ CLKDEV_CON_ID("cp", &cp_clk),
+ CLKDEV_CON_ID("peripheral_clk", &hp_clk),
+
+ /* MSTP */
+ CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
+ CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */
+ CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]), /* SCIFB0 */
+ CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP207]), /* SCIFB1 */
+ CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]), /* SCIFB2 */
+ CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP202]), /* SCIFA2 */
+ CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP721]), /* SCIF0 */
+ CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP720]), /* SCIF1 */
+ CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP719]), /* SCIF2 */
+ CLKDEV_DEV_ID("sh-sci.9", &mstp_clks[MSTP718]), /* SCIF3 */
+ CLKDEV_DEV_ID("sh-sci.10", &mstp_clks[MSTP715]), /* SCIF4 */
+ CLKDEV_DEV_ID("sh-sci.11", &mstp_clks[MSTP714]), /* SCIF5 */
+ CLKDEV_DEV_ID("sh-sci.12", &mstp_clks[MSTP1105]), /* SCIFA3 */
+ CLKDEV_DEV_ID("sh-sci.13", &mstp_clks[MSTP1106]), /* SCIFA4 */
+ CLKDEV_DEV_ID("sh-sci.14", &mstp_clks[MSTP1107]), /* SCIFA5 */
+ CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]),
+};
+
+#define R8A7791_CLOCK_ROOT(e, m, p0, p1, p30, p31) \
+ extal_clk.rate = e * 1000 * 1000; \
+ main_clk.parent = m; \
+ SH_CLK_SET_RATIO(&pll1_clk_ratio, p1 / 2, 1); \
+ if (mode & MD(19)) \
+ SH_CLK_SET_RATIO(&pll3_clk_ratio, p31, 1); \
+ else \
+ SH_CLK_SET_RATIO(&pll3_clk_ratio, p30, 1)
+
+
+void __init r8a7791_clock_init(void)
+{
+ void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE);
+ u32 mode;
+ int k, ret = 0;
+
+ BUG_ON(!modemr);
+ mode = ioread32(modemr);
+ iounmap(modemr);
+
+ switch (mode & (MD(14) | MD(13))) {
+ case 0:
+ R8A7791_CLOCK_ROOT(15, &extal_clk, 172, 208, 106, 88);
+ break;
+ case MD(13):
+ R8A7791_CLOCK_ROOT(20, &extal_clk, 130, 156, 80, 66);
+ break;
+ case MD(14):
+ R8A7791_CLOCK_ROOT(26, &extal_div2_clk, 200, 240, 122, 102);
+ break;
+ case MD(13) | MD(14):
+ R8A7791_CLOCK_ROOT(30, &extal_div2_clk, 172, 208, 106, 88);
+ break;
+ }
+
+ for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+ ret = clk_register(main_clks[k]);
+
+ if (!ret)
+ ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
+
+ clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+ if (!ret)
+ shmobile_clk_init();
+ else
+ goto epanic;
+
+ return;
+
+epanic:
+ panic("failed to setup r8a7791 clocks\n");
+}
diff --git a/arch/arm/mach-shmobile/headsmp.S b/arch/arm/mach-shmobile/headsmp.S
index f93751c..e5be5c8 100644
--- a/arch/arm/mach-shmobile/headsmp.S
+++ b/arch/arm/mach-shmobile/headsmp.S
@@ -40,6 +40,9 @@
.globl shmobile_boot_arg
shmobile_boot_arg:
2: .space 4
+ .globl shmobile_boot_size
+shmobile_boot_size:
+ .long . - shmobile_boot_vector
/*
* Per-CPU SMP boot function/argument selection code based on MPIDR
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index 7b93868..e319805 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -9,16 +9,23 @@
extern void shmobile_boot_vector(void);
extern unsigned long shmobile_boot_fn;
extern unsigned long shmobile_boot_arg;
+extern unsigned long shmobile_boot_size;
extern void shmobile_smp_boot(void);
extern void shmobile_smp_sleep(void);
extern void shmobile_smp_hook(unsigned int cpu, unsigned long fn,
unsigned long arg);
+extern int shmobile_smp_cpu_disable(unsigned int cpu);
+extern void shmobile_invalidate_start(void);
extern void shmobile_boot_scu(void);
extern void shmobile_smp_scu_prepare_cpus(unsigned int max_cpus);
-extern int shmobile_smp_scu_boot_secondary(unsigned int cpu,
- struct task_struct *idle);
extern void shmobile_smp_scu_cpu_die(unsigned int cpu);
extern int shmobile_smp_scu_cpu_kill(unsigned int cpu);
+extern void shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus);
+extern int shmobile_smp_apmu_boot_secondary(unsigned int cpu,
+ struct task_struct *idle);
+extern void shmobile_smp_apmu_cpu_die(unsigned int cpu);
+extern int shmobile_smp_apmu_cpu_kill(unsigned int cpu);
+extern void shmobile_invalidate_start(void);
struct clk;
extern int shmobile_clk_init(void);
extern void shmobile_handle_irq_intc(struct pt_regs *);
@@ -39,7 +46,6 @@
#endif
extern void __iomem *shmobile_scu_base;
-extern void shmobile_smp_init_cpus(unsigned int ncores);
static inline void __init shmobile_init_late(void)
{
diff --git a/arch/arm/mach-shmobile/include/mach/r7s72100.h b/arch/arm/mach-shmobile/include/mach/r7s72100.h
new file mode 100644
index 0000000..5f34b20
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/r7s72100.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_R7S72100_H__
+#define __ASM_R7S72100_H__
+
+void r7s72100_add_dt_devices(void);
+void r7s72100_clock_init(void);
+void r7s72100_init_early(void);
+
+#endif /* __ASM_R7S72100_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/r8a73a4.h b/arch/arm/mach-shmobile/include/mach/r8a73a4.h
index f3a9b70..ce8bdd1 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a73a4.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a73a4.h
@@ -1,10 +1,19 @@
#ifndef __ASM_R8A73A4_H__
#define __ASM_R8A73A4_H__
+/* DMA slave IDs */
+enum {
+ SHDMA_SLAVE_INVALID,
+ SHDMA_SLAVE_MMCIF0_TX,
+ SHDMA_SLAVE_MMCIF0_RX,
+ SHDMA_SLAVE_MMCIF1_TX,
+ SHDMA_SLAVE_MMCIF1_RX,
+};
+
void r8a73a4_add_standard_devices(void);
void r8a73a4_add_dt_devices(void);
void r8a73a4_clock_init(void);
void r8a73a4_pinmux_init(void);
-void r8a73a4_init_delay(void);
+void r8a73a4_init_early(void);
#endif /* __ASM_R8A73A4_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7778.h b/arch/arm/mach-shmobile/include/mach/r8a7778.h
index adfcf51..dbe221a 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7778.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7778.h
@@ -1,6 +1,7 @@
/*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ * Copyright (C) 2013 Cogent Embedded, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,6 +22,13 @@
#include <linux/sh_eth.h>
#include <linux/platform_data/camera-rcar.h>
+/* HPB-DMA slave IDs */
+enum {
+ HPBDMA_SLAVE_DUMMY,
+ HPBDMA_SLAVE_SDHI0_TX,
+ HPBDMA_SLAVE_SDHI0_RX,
+};
+
extern void r8a7778_add_standard_devices(void);
extern void r8a7778_add_standard_devices_dt(void);
extern void r8a7778_add_ether_device(struct sh_eth_plat_data *pdata);
@@ -33,6 +41,9 @@
extern void r8a7778_init_irq_dt(void);
extern void r8a7778_clock_init(void);
extern void r8a7778_init_irq_extpin(int irlm);
+extern void r8a7778_init_irq_extpin_dt(int irlm);
extern void r8a7778_pinmux_init(void);
+extern int r8a7778_usb_phy_power(bool enable);
+
#endif /* __ASM_R8A7778_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7779.h b/arch/arm/mach-shmobile/include/mach/r8a7779.h
index 11c7400..17af34e 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7779.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7779.h
@@ -6,6 +6,13 @@
#include <linux/sh_eth.h>
#include <linux/platform_data/camera-rcar.h>
+/* HPB-DMA slave IDs */
+enum {
+ HPBDMA_SLAVE_DUMMY,
+ HPBDMA_SLAVE_SDHI0_TX,
+ HPBDMA_SLAVE_SDHI0_RX,
+};
+
struct platform_device;
struct r8a7779_pm_ch {
@@ -26,6 +33,7 @@
extern void r8a7779_init_delay(void);
extern void r8a7779_init_irq_extpin(int irlm);
+extern void r8a7779_init_irq_extpin_dt(int irlm);
extern void r8a7779_init_irq_dt(void);
extern void r8a7779_map_io(void);
extern void r8a7779_earlytimer_init(void);
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7790.h b/arch/arm/mach-shmobile/include/mach/r8a7790.h
index 788d559..5fbfa28 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7790.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7790.h
@@ -1,14 +1,13 @@
#ifndef __ASM_R8A7790_H__
#define __ASM_R8A7790_H__
+#include <mach/rcar-gen2.h>
+
void r8a7790_add_standard_devices(void);
void r8a7790_add_dt_devices(void);
void r8a7790_clock_init(void);
void r8a7790_pinmux_init(void);
-void r8a7790_init_delay(void);
-void r8a7790_timer_init(void);
-
-#define MD(nr) BIT(nr)
-u32 r8a7790_read_mode_pins(void);
+void r8a7790_init_early(void);
+extern struct smp_operations r8a7790_smp_ops;
#endif /* __ASM_R8A7790_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7791.h b/arch/arm/mach-shmobile/include/mach/r8a7791.h
new file mode 100644
index 0000000..051ead3
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/r8a7791.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_R8A7791_H__
+#define __ASM_R8A7791_H__
+
+void r8a7791_add_standard_devices(void);
+void r8a7791_add_dt_devices(void);
+void r8a7791_clock_init(void);
+void r8a7791_init_early(void);
+extern struct smp_operations r8a7791_smp_ops;
+
+#endif /* __ASM_R8A7791_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/rcar-gen2.h b/arch/arm/mach-shmobile/include/mach/rcar-gen2.h
new file mode 100644
index 0000000..43f606e
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/rcar-gen2.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_RCAR_GEN2_H__
+#define __ASM_RCAR_GEN2_H__
+
+void rcar_gen2_timer_init(void);
+#define MD(nr) BIT(nr)
+u32 rcar_gen2_read_mode_pins(void);
+
+#endif /* __ASM_RCAR_GEN2_H__ */
diff --git a/arch/arm/mach-shmobile/platsmp-apmu.c b/arch/arm/mach-shmobile/platsmp-apmu.c
new file mode 100644
index 0000000..1da5a72
--- /dev/null
+++ b/arch/arm/mach-shmobile/platsmp-apmu.c
@@ -0,0 +1,195 @@
+/*
+ * SMP support for SoCs with APMU
+ *
+ * Copyright (C) 2013 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/of_address.h>
+#include <linux/smp.h>
+#include <asm/cacheflush.h>
+#include <asm/cp15.h>
+#include <asm/smp_plat.h>
+#include <mach/common.h>
+
+static struct {
+ void __iomem *iomem;
+ int bit;
+} apmu_cpus[CONFIG_NR_CPUS];
+
+#define WUPCR_OFFS 0x10
+#define PSTR_OFFS 0x40
+#define CPUNCR_OFFS(n) (0x100 + (0x10 * (n)))
+
+static int apmu_power_on(void __iomem *p, int bit)
+{
+ /* request power on */
+ writel_relaxed(BIT(bit), p + WUPCR_OFFS);
+
+ /* wait for APMU to finish */
+ while (readl_relaxed(p + WUPCR_OFFS) != 0)
+ ;
+
+ return 0;
+}
+
+static int apmu_power_off(void __iomem *p, int bit)
+{
+ /* request Core Standby for next WFI */
+ writel_relaxed(3, p + CPUNCR_OFFS(bit));
+ return 0;
+}
+
+static int apmu_power_off_poll(void __iomem *p, int bit)
+{
+ int k;
+
+ for (k = 0; k < 1000; k++) {
+ if (((readl_relaxed(p + PSTR_OFFS) >> (bit * 4)) & 0x03) == 3)
+ return 1;
+
+ mdelay(1);
+ }
+
+ return 0;
+}
+
+static int apmu_wrap(int cpu, int (*fn)(void __iomem *p, int cpu))
+{
+ void __iomem *p = apmu_cpus[cpu].iomem;
+
+ return p ? fn(p, apmu_cpus[cpu].bit) : -EINVAL;
+}
+
+static void apmu_init_cpu(struct resource *res, int cpu, int bit)
+{
+ if (apmu_cpus[cpu].iomem)
+ return;
+
+ apmu_cpus[cpu].iomem = ioremap_nocache(res->start, resource_size(res));
+ apmu_cpus[cpu].bit = bit;
+
+ pr_debug("apmu ioremap %d %d 0x%08x 0x%08x\n", cpu, bit,
+ res->start, resource_size(res));
+}
+
+static struct {
+ struct resource iomem;
+ int cpus[4];
+} apmu_config[] = {
+ {
+ .iomem = DEFINE_RES_MEM(0xe6152000, 0x88),
+ .cpus = { 0, 1, 2, 3 },
+ },
+ {
+ .iomem = DEFINE_RES_MEM(0xe6151000, 0x88),
+ .cpus = { 0x100, 0x101, 0x102, 0x103 },
+ }
+};
+
+static void apmu_parse_cfg(void (*fn)(struct resource *res, int cpu, int bit))
+{
+ u32 id;
+ int k;
+ int bit, index;
+ bool is_allowed;
+
+ for (k = 0; k < ARRAY_SIZE(apmu_config); k++) {
+ /* only enable the cluster that includes the boot CPU */
+ is_allowed = false;
+ for (bit = 0; bit < ARRAY_SIZE(apmu_config[k].cpus); bit++) {
+ id = apmu_config[k].cpus[bit];
+ if (id >= 0) {
+ if (id == cpu_logical_map(0))
+ is_allowed = true;
+ }
+ }
+ if (!is_allowed)
+ continue;
+
+ for (bit = 0; bit < ARRAY_SIZE(apmu_config[k].cpus); bit++) {
+ id = apmu_config[k].cpus[bit];
+ if (id >= 0) {
+ index = get_logical_index(id);
+ if (index >= 0)
+ fn(&apmu_config[k].iomem, index, bit);
+ }
+ }
+ }
+}
+
+void __init shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus)
+{
+ /* install boot code shared by all CPUs */
+ shmobile_boot_fn = virt_to_phys(shmobile_smp_boot);
+ shmobile_boot_arg = MPIDR_HWID_BITMASK;
+
+ /* perform per-cpu setup */
+ apmu_parse_cfg(apmu_init_cpu);
+}
+
+int shmobile_smp_apmu_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ /* For this particular CPU register boot vector */
+ shmobile_smp_hook(cpu, virt_to_phys(shmobile_invalidate_start), 0);
+
+ return apmu_wrap(cpu, apmu_power_on);
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+/* nicked from arch/arm/mach-exynos/hotplug.c */
+static inline void cpu_enter_lowpower_a15(void)
+{
+ unsigned int v;
+
+ asm volatile(
+ " mrc p15, 0, %0, c1, c0, 0\n"
+ " bic %0, %0, %1\n"
+ " mcr p15, 0, %0, c1, c0, 0\n"
+ : "=&r" (v)
+ : "Ir" (CR_C)
+ : "cc");
+
+ flush_cache_louis();
+
+ asm volatile(
+ /*
+ * Turn off coherency
+ */
+ " mrc p15, 0, %0, c1, c0, 1\n"
+ " bic %0, %0, %1\n"
+ " mcr p15, 0, %0, c1, c0, 1\n"
+ : "=&r" (v)
+ : "Ir" (0x40)
+ : "cc");
+
+ isb();
+ dsb();
+}
+
+void shmobile_smp_apmu_cpu_die(unsigned int cpu)
+{
+ /* For this particular CPU deregister boot vector */
+ shmobile_smp_hook(cpu, 0, 0);
+
+ /* Select next sleep mode using the APMU */
+ apmu_wrap(cpu, apmu_power_off);
+
+ /* Do ARM specific CPU shutdown */
+ cpu_enter_lowpower_a15();
+
+ /* jump to shared mach-shmobile sleep / reset code */
+ shmobile_smp_sleep();
+}
+
+int shmobile_smp_apmu_cpu_kill(unsigned int cpu)
+{
+ return apmu_wrap(cpu, apmu_power_off_poll);
+}
+#endif
diff --git a/arch/arm/mach-shmobile/platsmp-scu.c b/arch/arm/mach-shmobile/platsmp-scu.c
index c96f501..673ad6e 100644
--- a/arch/arm/mach-shmobile/platsmp-scu.c
+++ b/arch/arm/mach-shmobile/platsmp-scu.c
@@ -7,6 +7,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/cpu.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/io.h>
@@ -16,6 +17,26 @@
#include <asm/smp_scu.h>
#include <mach/common.h>
+static int shmobile_smp_scu_notifier_call(struct notifier_block *nfb,
+ unsigned long action, void *hcpu)
+{
+ unsigned int cpu = (long)hcpu;
+
+ switch (action) {
+ case CPU_UP_PREPARE:
+ /* For this particular CPU register SCU SMP boot vector */
+ shmobile_smp_hook(cpu, virt_to_phys(shmobile_boot_scu),
+ (unsigned long)shmobile_scu_base);
+ break;
+ };
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block shmobile_smp_scu_notifier = {
+ .notifier_call = shmobile_smp_scu_notifier_call,
+};
+
void __init shmobile_smp_scu_prepare_cpus(unsigned int max_cpus)
{
/* install boot code shared by all CPUs */
@@ -25,14 +46,9 @@
/* enable SCU and cache coherency on booting CPU */
scu_enable(shmobile_scu_base);
scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL);
-}
-int shmobile_smp_scu_boot_secondary(unsigned int cpu, struct task_struct *idle)
-{
- /* For this particular CPU register SCU boot vector */
- shmobile_smp_hook(cpu, virt_to_phys(shmobile_boot_scu),
- (unsigned long)shmobile_scu_base);
- return 0;
+ /* Use CPU notifier for reset vector control */
+ register_cpu_notifier(&shmobile_smp_scu_notifier);
}
#ifdef CONFIG_HOTPLUG_CPU
diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c
index d4ae616..9ebc246 100644
--- a/arch/arm/mach-shmobile/platsmp.c
+++ b/arch/arm/mach-shmobile/platsmp.c
@@ -11,25 +11,10 @@
* published by the Free Software Foundation.
*/
#include <linux/init.h>
-#include <linux/smp.h>
#include <asm/cacheflush.h>
#include <asm/smp_plat.h>
#include <mach/common.h>
-void __init shmobile_smp_init_cpus(unsigned int ncores)
-{
- unsigned int i;
-
- if (ncores > nr_cpu_ids) {
- pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
- ncores, nr_cpu_ids);
- ncores = nr_cpu_ids;
- }
-
- for (i = 0; i < ncores; i++)
- set_cpu_possible(i, true);
-}
-
extern unsigned long shmobile_smp_fn[];
extern unsigned long shmobile_smp_arg[];
extern unsigned long shmobile_smp_mpidr[];
@@ -44,3 +29,10 @@
shmobile_smp_arg[cpu] = arg;
flush_cache_all();
}
+
+#ifdef CONFIG_HOTPLUG_CPU
+int shmobile_smp_cpu_disable(unsigned int cpu)
+{
+ return 0; /* Hotplug of any CPU is supported */
+}
+#endif
diff --git a/arch/arm/mach-shmobile/setup-r7s72100.c b/arch/arm/mach-shmobile/setup-r7s72100.c
new file mode 100644
index 0000000..d4eb509
--- /dev/null
+++ b/arch/arm/mach-shmobile/setup-r7s72100.c
@@ -0,0 +1,88 @@
+/*
+ * r7s72100 processor support
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/of_platform.h>
+#include <linux/serial_sci.h>
+#include <mach/common.h>
+#include <mach/irqs.h>
+#include <mach/r7s72100.h>
+#include <asm/mach/arch.h>
+
+#define SCIF_DATA(index, baseaddr, irq) \
+[index] = { \
+ .type = PORT_SCIF, \
+ .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE, \
+ .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \
+ .scbrr_algo_id = SCBRR_ALGO_2, \
+ .scscr = SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE | \
+ SCSCR_REIE, \
+ .mapbase = baseaddr, \
+ .irqs = { irq + 1, irq + 2, irq + 3, irq }, \
+}
+
+enum { SCIF0, SCIF1, SCIF2, SCIF3, SCIF4, SCIF5, SCIF6, SCIF7 };
+
+static const struct plat_sci_port scif[] __initconst = {
+ SCIF_DATA(SCIF0, 0xe8007000, gic_iid(221)), /* SCIF0 */
+ SCIF_DATA(SCIF1, 0xe8007800, gic_iid(225)), /* SCIF1 */
+ SCIF_DATA(SCIF2, 0xe8008000, gic_iid(229)), /* SCIF2 */
+ SCIF_DATA(SCIF3, 0xe8008800, gic_iid(233)), /* SCIF3 */
+ SCIF_DATA(SCIF4, 0xe8009000, gic_iid(237)), /* SCIF4 */
+ SCIF_DATA(SCIF5, 0xe8009800, gic_iid(241)), /* SCIF5 */
+ SCIF_DATA(SCIF6, 0xe800a000, gic_iid(245)), /* SCIF6 */
+ SCIF_DATA(SCIF7, 0xe800a800, gic_iid(249)), /* SCIF7 */
+};
+
+static inline void r7s72100_register_scif(int idx)
+{
+ platform_device_register_data(&platform_bus, "sh-sci", idx, &scif[idx],
+ sizeof(struct plat_sci_port));
+}
+
+void __init r7s72100_add_dt_devices(void)
+{
+ r7s72100_register_scif(SCIF0);
+ r7s72100_register_scif(SCIF1);
+ r7s72100_register_scif(SCIF2);
+ r7s72100_register_scif(SCIF3);
+ r7s72100_register_scif(SCIF4);
+ r7s72100_register_scif(SCIF5);
+ r7s72100_register_scif(SCIF6);
+ r7s72100_register_scif(SCIF7);
+}
+
+void __init r7s72100_init_early(void)
+{
+ shmobile_setup_delay(400, 1, 3); /* Cortex-A9 @ 400MHz */
+}
+
+#ifdef CONFIG_USE_OF
+static const char *r7s72100_boards_compat_dt[] __initdata = {
+ "renesas,r7s72100",
+ NULL,
+};
+
+DT_MACHINE_START(R7S72100_DT, "Generic R7S72100 (Flattened Device Tree)")
+ .init_early = r7s72100_init_early,
+ .dt_compat = r7s72100_boards_compat_dt,
+MACHINE_END
+#endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c
index 89491700..b0f2749 100644
--- a/arch/arm/mach-shmobile/setup-r8a73a4.c
+++ b/arch/arm/mach-shmobile/setup-r8a73a4.c
@@ -22,8 +22,10 @@
#include <linux/of_platform.h>
#include <linux/platform_data/irq-renesas-irqc.h>
#include <linux/serial_sci.h>
+#include <linux/sh_dma.h>
#include <linux/sh_timer.h>
#include <mach/common.h>
+#include <mach/dma-register.h>
#include <mach/irqs.h>
#include <mach/r8a73a4.h>
#include <asm/mach/arch.h>
@@ -199,15 +201,104 @@
r8a7790_register_cmt(10);
}
+/* DMA */
+static const struct sh_dmae_slave_config dma_slaves[] = {
+ {
+ .slave_id = SHDMA_SLAVE_MMCIF0_TX,
+ .addr = 0xee200034,
+ .chcr = CHCR_TX(XMIT_SZ_32BIT),
+ .mid_rid = 0xd1,
+ }, {
+ .slave_id = SHDMA_SLAVE_MMCIF0_RX,
+ .addr = 0xee200034,
+ .chcr = CHCR_RX(XMIT_SZ_32BIT),
+ .mid_rid = 0xd2,
+ }, {
+ .slave_id = SHDMA_SLAVE_MMCIF1_TX,
+ .addr = 0xee220034,
+ .chcr = CHCR_TX(XMIT_SZ_32BIT),
+ .mid_rid = 0xe1,
+ }, {
+ .slave_id = SHDMA_SLAVE_MMCIF1_RX,
+ .addr = 0xee220034,
+ .chcr = CHCR_RX(XMIT_SZ_32BIT),
+ .mid_rid = 0xe2,
+ },
+};
+
+#define DMAE_CHANNEL(a, b) \
+ { \
+ .offset = (a) - 0x20, \
+ .dmars = (a) - 0x20 + 0x40, \
+ .chclr_bit = (b), \
+ .chclr_offset = 0x80 - 0x20, \
+ }
+
+static const struct sh_dmae_channel dma_channels[] = {
+ DMAE_CHANNEL(0x8000, 0),
+ DMAE_CHANNEL(0x8080, 1),
+ DMAE_CHANNEL(0x8100, 2),
+ DMAE_CHANNEL(0x8180, 3),
+ DMAE_CHANNEL(0x8200, 4),
+ DMAE_CHANNEL(0x8280, 5),
+ DMAE_CHANNEL(0x8300, 6),
+ DMAE_CHANNEL(0x8380, 7),
+ DMAE_CHANNEL(0x8400, 8),
+ DMAE_CHANNEL(0x8480, 9),
+ DMAE_CHANNEL(0x8500, 10),
+ DMAE_CHANNEL(0x8580, 11),
+ DMAE_CHANNEL(0x8600, 12),
+ DMAE_CHANNEL(0x8680, 13),
+ DMAE_CHANNEL(0x8700, 14),
+ DMAE_CHANNEL(0x8780, 15),
+ DMAE_CHANNEL(0x8800, 16),
+ DMAE_CHANNEL(0x8880, 17),
+ DMAE_CHANNEL(0x8900, 18),
+ DMAE_CHANNEL(0x8980, 19),
+};
+
+static const struct sh_dmae_pdata dma_pdata = {
+ .slave = dma_slaves,
+ .slave_num = ARRAY_SIZE(dma_slaves),
+ .channel = dma_channels,
+ .channel_num = ARRAY_SIZE(dma_channels),
+ .ts_low_shift = TS_LOW_SHIFT,
+ .ts_low_mask = TS_LOW_BIT << TS_LOW_SHIFT,
+ .ts_high_shift = TS_HI_SHIFT,
+ .ts_high_mask = TS_HI_BIT << TS_HI_SHIFT,
+ .ts_shift = dma_ts_shift,
+ .ts_shift_num = ARRAY_SIZE(dma_ts_shift),
+ .dmaor_init = DMAOR_DME,
+ .chclr_present = 1,
+ .chclr_bitwise = 1,
+};
+
+static struct resource dma_resources[] = {
+ DEFINE_RES_MEM(0xe6700020, 0x89e0),
+ DEFINE_RES_IRQ_NAMED(gic_spi(220), "error_irq"),
+ {
+ /* IRQ for channels 0-19 */
+ .start = gic_spi(200),
+ .end = gic_spi(219),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+#define r8a73a4_register_dmac() \
+ platform_device_register_resndata(&platform_bus, "sh-dma-engine", 0, \
+ dma_resources, ARRAY_SIZE(dma_resources), \
+ &dma_pdata, sizeof(dma_pdata))
+
void __init r8a73a4_add_standard_devices(void)
{
r8a73a4_add_dt_devices();
r8a73a4_register_irqc(0);
r8a73a4_register_irqc(1);
r8a73a4_register_thermal();
+ r8a73a4_register_dmac();
}
-void __init r8a73a4_init_delay(void)
+void __init r8a73a4_init_early(void)
{
#ifndef CONFIG_ARM_ARCH_TIMER
shmobile_setup_delay(1500, 2, 4); /* Cortex-A15 @ 1500MHz */
@@ -222,7 +313,7 @@
};
DT_MACHINE_START(R8A73A4_DT, "Generic R8A73A4 (Flattened Device Tree)")
- .init_early = r8a73a4_init_delay,
+ .init_early = r8a73a4_init_early,
.dt_compat = r8a73a4_boards_compat_dt,
MACHINE_END
#endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c
index 6a2657e..16d49aa 100644
--- a/arch/arm/mach-shmobile/setup-r8a7778.c
+++ b/arch/arm/mach-shmobile/setup-r8a7778.c
@@ -24,6 +24,7 @@
#include <linux/irqchip/arm-gic.h>
#include <linux/of.h>
#include <linux/of_platform.h>
+#include <linux/platform_data/dma-rcar-hpbdma.h>
#include <linux/platform_data/gpio-rcar.h>
#include <linux/platform_data/irq-renesas-intc-irqpin.h>
#include <linux/platform_device.h>
@@ -95,29 +96,46 @@
&sh_tmu##idx##_platform_data, \
sizeof(sh_tmu##idx##_platform_data))
-/* USB */
-static struct usb_phy *phy;
+int r8a7778_usb_phy_power(bool enable)
+{
+ static struct usb_phy *phy = NULL;
+ int ret = 0;
+ if (!phy)
+ phy = usb_get_phy(USB_PHY_TYPE_USB2);
+
+ if (IS_ERR(phy)) {
+ pr_err("kernel doesn't have usb phy driver\n");
+ return PTR_ERR(phy);
+ }
+
+ if (enable)
+ ret = usb_phy_init(phy);
+ else
+ usb_phy_shutdown(phy);
+
+ return ret;
+}
+
+/* USB */
static int usb_power_on(struct platform_device *pdev)
{
- if (IS_ERR(phy))
- return PTR_ERR(phy);
+ int ret = r8a7778_usb_phy_power(true);
+
+ if (ret)
+ return ret;
pm_runtime_enable(&pdev->dev);
pm_runtime_get_sync(&pdev->dev);
- usb_phy_init(phy);
-
return 0;
}
static void usb_power_off(struct platform_device *pdev)
{
- if (IS_ERR(phy))
+ if (r8a7778_usb_phy_power(false))
return;
- usb_phy_shutdown(phy);
-
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
}
@@ -339,6 +357,88 @@
r8a7778_register_tmu(1);
}
+/* HPB-DMA */
+
+/* Asynchronous mode register (ASYNCMDR) bits */
+#define HPB_DMAE_ASYNCMDR_ASMD22_MASK BIT(2) /* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD22_SINGLE BIT(2) /* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD22_MULTI 0 /* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD21_MASK BIT(1) /* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD21_SINGLE BIT(1) /* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD21_MULTI 0 /* SDHI0 */
+
+static const struct hpb_dmae_slave_config hpb_dmae_slaves[] = {
+ {
+ .id = HPBDMA_SLAVE_SDHI0_TX,
+ .addr = 0xffe4c000 + 0x30,
+ .dcr = HPB_DMAE_DCR_SPDS_16BIT |
+ HPB_DMAE_DCR_DMDL |
+ HPB_DMAE_DCR_DPDS_16BIT,
+ .rstr = HPB_DMAE_ASYNCRSTR_ASRST21 |
+ HPB_DMAE_ASYNCRSTR_ASRST22 |
+ HPB_DMAE_ASYNCRSTR_ASRST23,
+ .mdr = HPB_DMAE_ASYNCMDR_ASMD21_MULTI,
+ .mdm = HPB_DMAE_ASYNCMDR_ASMD21_MASK,
+ .port = 0x0D0C,
+ .flags = HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE,
+ .dma_ch = 21,
+ }, {
+ .id = HPBDMA_SLAVE_SDHI0_RX,
+ .addr = 0xffe4c000 + 0x30,
+ .dcr = HPB_DMAE_DCR_SMDL |
+ HPB_DMAE_DCR_SPDS_16BIT |
+ HPB_DMAE_DCR_DPDS_16BIT,
+ .rstr = HPB_DMAE_ASYNCRSTR_ASRST21 |
+ HPB_DMAE_ASYNCRSTR_ASRST22 |
+ HPB_DMAE_ASYNCRSTR_ASRST23,
+ .mdr = HPB_DMAE_ASYNCMDR_ASMD22_MULTI,
+ .mdm = HPB_DMAE_ASYNCMDR_ASMD22_MASK,
+ .port = 0x0D0C,
+ .flags = HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE,
+ .dma_ch = 22,
+ },
+};
+
+static const struct hpb_dmae_channel hpb_dmae_channels[] = {
+ HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_TX), /* ch. 21 */
+ HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_RX), /* ch. 22 */
+};
+
+static struct hpb_dmae_pdata dma_platform_data __initdata = {
+ .slaves = hpb_dmae_slaves,
+ .num_slaves = ARRAY_SIZE(hpb_dmae_slaves),
+ .channels = hpb_dmae_channels,
+ .num_channels = ARRAY_SIZE(hpb_dmae_channels),
+ .ts_shift = {
+ [XMIT_SZ_8BIT] = 0,
+ [XMIT_SZ_16BIT] = 1,
+ [XMIT_SZ_32BIT] = 2,
+ },
+ .num_hw_channels = 39,
+};
+
+static struct resource hpb_dmae_resources[] __initdata = {
+ /* Channel registers */
+ DEFINE_RES_MEM(0xffc08000, 0x1000),
+ /* Common registers */
+ DEFINE_RES_MEM(0xffc09000, 0x170),
+ /* Asynchronous reset registers */
+ DEFINE_RES_MEM(0xffc00300, 4),
+ /* Asynchronous mode registers */
+ DEFINE_RES_MEM(0xffc00400, 4),
+ /* IRQ for DMA channels */
+ DEFINE_RES_NAMED(gic_iid(0x7b), 5, NULL, IORESOURCE_IRQ),
+};
+
+static void __init r8a7778_register_hpb_dmae(void)
+{
+ platform_device_register_resndata(&platform_bus, "hpb-dma-engine", -1,
+ hpb_dmae_resources,
+ ARRAY_SIZE(hpb_dmae_resources),
+ &dma_platform_data,
+ sizeof(dma_platform_data));
+}
+
void __init r8a7778_add_standard_devices(void)
{
r8a7778_add_dt_devices();
@@ -349,12 +449,12 @@
r8a7778_register_hspi(0);
r8a7778_register_hspi(1);
r8a7778_register_hspi(2);
+
+ r8a7778_register_hpb_dmae();
}
void __init r8a7778_init_late(void)
{
- phy = usb_get_phy(USB_PHY_TYPE_USB2);
-
platform_device_register_full(&ehci_info);
platform_device_register_full(&ohci_info);
}
@@ -376,7 +476,7 @@
DEFINE_RES_IRQ(gic_iid(0x3e)), /* IRQ3 */
};
-void __init r8a7778_init_irq_extpin(int irlm)
+void __init r8a7778_init_irq_extpin_dt(int irlm)
{
void __iomem *icr0 = ioremap_nocache(0xfe780000, PAGE_SIZE);
unsigned long tmp;
@@ -394,7 +494,11 @@
tmp |= (1 << 21); /* LVLMODE = 1 */
iowrite32(tmp, icr0);
iounmap(icr0);
+}
+void __init r8a7778_init_irq_extpin(int irlm)
+{
+ r8a7778_init_irq_extpin_dt(irlm);
if (irlm)
platform_device_register_resndata(
&platform_bus, "renesas_intc_irqpin", -1,
diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index ecd0148..13049e9 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -25,6 +25,7 @@
#include <linux/irqchip.h>
#include <linux/irqchip/arm-gic.h>
#include <linux/of_platform.h>
+#include <linux/platform_data/dma-rcar-hpbdma.h>
#include <linux/platform_data/gpio-rcar.h>
#include <linux/platform_data/irq-renesas-intc-irqpin.h>
#include <linux/platform_device.h>
@@ -97,7 +98,7 @@
DEFINE_RES_IRQ(gic_spi(30)), /* IRQ3 */
};
-void __init r8a7779_init_irq_extpin(int irlm)
+void __init r8a7779_init_irq_extpin_dt(int irlm)
{
void __iomem *icr0 = ioremap_nocache(0xfe780000, PAGE_SIZE);
u32 tmp;
@@ -115,7 +116,11 @@
tmp |= (1 << 21); /* LVLMODE = 1 */
iowrite32(tmp, icr0);
iounmap(icr0);
+}
+void __init r8a7779_init_irq_extpin(int irlm)
+{
+ r8a7779_init_irq_extpin_dt(irlm);
if (irlm)
platform_device_register_resndata(
&platform_bus, "renesas_intc_irqpin", -1,
@@ -632,6 +637,158 @@
&vin3_info,
};
+/* HPB-DMA */
+
+/* Asynchronous mode register bits */
+#define HPB_DMAE_ASYNCMDR_ASMD43_MASK BIT(23) /* MMC1 */
+#define HPB_DMAE_ASYNCMDR_ASMD43_SINGLE BIT(23) /* MMC1 */
+#define HPB_DMAE_ASYNCMDR_ASMD43_MULTI 0 /* MMC1 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD43_MASK BIT(22) /* MMC1 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD43_BURST BIT(22) /* MMC1 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD43_NBURST 0 /* MMC1 */
+#define HPB_DMAE_ASYNCMDR_ASMD24_MASK BIT(21) /* MMC0 */
+#define HPB_DMAE_ASYNCMDR_ASMD24_SINGLE BIT(21) /* MMC0 */
+#define HPB_DMAE_ASYNCMDR_ASMD24_MULTI 0 /* MMC0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD24_MASK BIT(20) /* MMC0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD24_BURST BIT(20) /* MMC0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD24_NBURST 0 /* MMC0 */
+#define HPB_DMAE_ASYNCMDR_ASMD41_MASK BIT(19) /* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASMD41_SINGLE BIT(19) /* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASMD41_MULTI 0 /* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD41_MASK BIT(18) /* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD41_BURST BIT(18) /* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD41_NBURST 0 /* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASMD40_MASK BIT(17) /* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASMD40_SINGLE BIT(17) /* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASMD40_MULTI 0 /* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD40_MASK BIT(16) /* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD40_BURST BIT(16) /* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD40_NBURST 0 /* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASMD39_MASK BIT(15) /* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASMD39_SINGLE BIT(15) /* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASMD39_MULTI 0 /* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD39_MASK BIT(14) /* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD39_BURST BIT(14) /* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD39_NBURST 0 /* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASMD27_MASK BIT(13) /* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASMD27_SINGLE BIT(13) /* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASMD27_MULTI 0 /* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD27_MASK BIT(12) /* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD27_BURST BIT(12) /* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD27_NBURST 0 /* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASMD26_MASK BIT(11) /* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASMD26_SINGLE BIT(11) /* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASMD26_MULTI 0 /* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD26_MASK BIT(10) /* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD26_BURST BIT(10) /* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD26_NBURST 0 /* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASMD25_MASK BIT(9) /* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASMD25_SINGLE BIT(9) /* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASMD25_MULTI 0 /* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD25_MASK BIT(8) /* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD25_BURST BIT(8) /* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD25_NBURST 0 /* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASMD23_MASK BIT(7) /* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD23_SINGLE BIT(7) /* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD23_MULTI 0 /* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD23_MASK BIT(6) /* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD23_BURST BIT(6) /* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD23_NBURST 0 /* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD22_MASK BIT(5) /* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD22_SINGLE BIT(5) /* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD22_MULTI 0 /* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD22_MASK BIT(4) /* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD22_BURST BIT(4) /* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD22_NBURST 0 /* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD21_MASK BIT(3) /* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD21_SINGLE BIT(3) /* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD21_MULTI 0 /* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD21_MASK BIT(2) /* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD21_BURST BIT(2) /* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD21_NBURST 0 /* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD20_MASK BIT(1) /* SDHI1 */
+#define HPB_DMAE_ASYNCMDR_ASMD20_SINGLE BIT(1) /* SDHI1 */
+#define HPB_DMAE_ASYNCMDR_ASMD20_MULTI 0 /* SDHI1 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD20_MASK BIT(0) /* SDHI1 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD20_BURST BIT(0) /* SDHI1 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD20_NBURST 0 /* SDHI1 */
+
+static const struct hpb_dmae_slave_config hpb_dmae_slaves[] = {
+ {
+ .id = HPBDMA_SLAVE_SDHI0_TX,
+ .addr = 0xffe4c000 + 0x30,
+ .dcr = HPB_DMAE_DCR_SPDS_16BIT |
+ HPB_DMAE_DCR_DMDL |
+ HPB_DMAE_DCR_DPDS_16BIT,
+ .rstr = HPB_DMAE_ASYNCRSTR_ASRST21 |
+ HPB_DMAE_ASYNCRSTR_ASRST22 |
+ HPB_DMAE_ASYNCRSTR_ASRST23,
+ .mdr = HPB_DMAE_ASYNCMDR_ASMD21_SINGLE |
+ HPB_DMAE_ASYNCMDR_ASBTMD21_NBURST,
+ .mdm = HPB_DMAE_ASYNCMDR_ASMD21_MASK |
+ HPB_DMAE_ASYNCMDR_ASBTMD21_MASK,
+ .port = 0x0D0C,
+ .flags = HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE,
+ .dma_ch = 21,
+ }, {
+ .id = HPBDMA_SLAVE_SDHI0_RX,
+ .addr = 0xffe4c000 + 0x30,
+ .dcr = HPB_DMAE_DCR_SMDL |
+ HPB_DMAE_DCR_SPDS_16BIT |
+ HPB_DMAE_DCR_DPDS_16BIT,
+ .rstr = HPB_DMAE_ASYNCRSTR_ASRST21 |
+ HPB_DMAE_ASYNCRSTR_ASRST22 |
+ HPB_DMAE_ASYNCRSTR_ASRST23,
+ .mdr = HPB_DMAE_ASYNCMDR_ASMD22_SINGLE |
+ HPB_DMAE_ASYNCMDR_ASBTMD22_NBURST,
+ .mdm = HPB_DMAE_ASYNCMDR_ASMD22_MASK |
+ HPB_DMAE_ASYNCMDR_ASBTMD22_MASK,
+ .port = 0x0D0C,
+ .flags = HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE,
+ .dma_ch = 22,
+ },
+};
+
+static const struct hpb_dmae_channel hpb_dmae_channels[] = {
+ HPB_DMAE_CHANNEL(0x93, HPBDMA_SLAVE_SDHI0_TX), /* ch. 21 */
+ HPB_DMAE_CHANNEL(0x93, HPBDMA_SLAVE_SDHI0_RX), /* ch. 22 */
+};
+
+static struct hpb_dmae_pdata dma_platform_data __initdata = {
+ .slaves = hpb_dmae_slaves,
+ .num_slaves = ARRAY_SIZE(hpb_dmae_slaves),
+ .channels = hpb_dmae_channels,
+ .num_channels = ARRAY_SIZE(hpb_dmae_channels),
+ .ts_shift = {
+ [XMIT_SZ_8BIT] = 0,
+ [XMIT_SZ_16BIT] = 1,
+ [XMIT_SZ_32BIT] = 2,
+ },
+ .num_hw_channels = 44,
+};
+
+static struct resource hpb_dmae_resources[] __initdata = {
+ /* Channel registers */
+ DEFINE_RES_MEM(0xffc08000, 0x1000),
+ /* Common registers */
+ DEFINE_RES_MEM(0xffc09000, 0x170),
+ /* Asynchronous reset registers */
+ DEFINE_RES_MEM(0xffc00300, 4),
+ /* Asynchronous mode registers */
+ DEFINE_RES_MEM(0xffc00400, 4),
+ /* IRQ for DMA channels */
+ DEFINE_RES_NAMED(gic_iid(0x8e), 12, NULL, IORESOURCE_IRQ),
+};
+
+static void __init r8a7779_register_hpb_dmae(void)
+{
+ platform_device_register_resndata(&platform_bus, "hpb-dma-engine", -1,
+ hpb_dmae_resources,
+ ARRAY_SIZE(hpb_dmae_resources),
+ &dma_platform_data,
+ sizeof(dma_platform_data));
+}
+
static struct platform_device *r8a7779_devices_dt[] __initdata = {
&scif0_device,
&scif1_device,
@@ -665,6 +822,7 @@
ARRAY_SIZE(r8a7779_devices_dt));
platform_add_devices(r8a7779_standard_devices,
ARRAY_SIZE(r8a7779_standard_devices));
+ r8a7779_register_hpb_dmae();
}
void __init r8a7779_add_ether_device(struct sh_eth_plat_data *pdata)
diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index d0f5c9f..c47bcebb 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -18,7 +18,6 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#include <linux/clocksource.h>
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/of_platform.h>
@@ -31,17 +30,18 @@
#include <mach/r8a7790.h>
#include <asm/mach/arch.h>
-static struct resource pfc_resources[] __initdata = {
+static const struct resource pfc_resources[] __initconst = {
DEFINE_RES_MEM(0xe6060000, 0x250),
};
#define R8A7790_GPIO(idx) \
-static struct resource r8a7790_gpio##idx##_resources[] __initdata = { \
+static const struct resource r8a7790_gpio##idx##_resources[] __initconst = { \
DEFINE_RES_MEM(0xe6050000 + 0x1000 * (idx), 0x50), \
DEFINE_RES_IRQ(gic_spi(4 + (idx))), \
}; \
\
-static struct gpio_rcar_config r8a7790_gpio##idx##_platform_data __initdata = { \
+static const struct gpio_rcar_config \
+r8a7790_gpio##idx##_platform_data __initconst = { \
.gpio_base = 32 * (idx), \
.irq_base = 0, \
.number_of_pins = 32, \
@@ -112,7 +112,7 @@
enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFA2, SCIF0, SCIF1,
HSCIF0, HSCIF1 };
-static struct plat_sci_port scif[] __initdata = {
+static const struct plat_sci_port scif[] __initconst = {
SCIFA_DATA(SCIFA0, 0xe6c40000, gic_spi(144)), /* SCIFA0 */
SCIFA_DATA(SCIFA1, 0xe6c50000, gic_spi(145)), /* SCIFA1 */
SCIFB_DATA(SCIFB0, 0xe6c20000, gic_spi(148)), /* SCIFB0 */
@@ -131,11 +131,11 @@
sizeof(struct plat_sci_port));
}
-static struct renesas_irqc_config irqc0_data __initdata = {
+static const struct renesas_irqc_config irqc0_data __initconst = {
.irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */
};
-static struct resource irqc0_resources[] __initdata = {
+static const struct resource irqc0_resources[] __initconst = {
DEFINE_RES_MEM(0xe61c0000, 0x200), /* IRQC Event Detector Block_0 */
DEFINE_RES_IRQ(gic_spi(0)), /* IRQ0 */
DEFINE_RES_IRQ(gic_spi(1)), /* IRQ1 */
@@ -150,7 +150,7 @@
&irqc##idx##_data, \
sizeof(struct renesas_irqc_config))
-static struct resource thermal_resources[] __initdata = {
+static const struct resource thermal_resources[] __initconst = {
DEFINE_RES_MEM(0xe61f0000, 0x14),
DEFINE_RES_MEM(0xe61f0100, 0x38),
DEFINE_RES_IRQ(gic_spi(69)),
@@ -161,13 +161,13 @@
thermal_resources, \
ARRAY_SIZE(thermal_resources))
-static struct sh_timer_config cmt00_platform_data __initdata = {
+static const struct sh_timer_config cmt00_platform_data __initconst = {
.name = "CMT00",
.timer_bit = 0,
.clockevent_rating = 80,
};
-static struct resource cmt00_resources[] __initdata = {
+static const struct resource cmt00_resources[] __initconst = {
DEFINE_RES_MEM(0xffca0510, 0x0c),
DEFINE_RES_MEM(0xffca0500, 0x04),
DEFINE_RES_IRQ(gic_spi(142)), /* CMT0_0 */
@@ -202,72 +202,7 @@
r8a7790_register_thermal();
}
-#define MODEMR 0xe6160060
-
-u32 __init r8a7790_read_mode_pins(void)
-{
- void __iomem *modemr = ioremap_nocache(MODEMR, 4);
- u32 mode;
-
- BUG_ON(!modemr);
- mode = ioread32(modemr);
- iounmap(modemr);
-
- return mode;
-}
-
-#define CNTCR 0
-#define CNTFID0 0x20
-
-void __init r8a7790_timer_init(void)
-{
-#ifdef CONFIG_ARM_ARCH_TIMER
- u32 mode = r8a7790_read_mode_pins();
- void __iomem *base;
- int extal_mhz = 0;
- u32 freq;
-
- /* At Linux boot time the r8a7790 arch timer comes up
- * with the counter disabled. Moreover, it may also report
- * a potentially incorrect fixed 13 MHz frequency. To be
- * correct these registers need to be updated to use the
- * frequency EXTAL / 2 which can be determined by the MD pins.
- */
-
- switch (mode & (MD(14) | MD(13))) {
- case 0:
- extal_mhz = 15;
- break;
- case MD(13):
- extal_mhz = 20;
- break;
- case MD(14):
- extal_mhz = 26;
- break;
- case MD(13) | MD(14):
- extal_mhz = 30;
- break;
- }
-
- /* The arch timer frequency equals EXTAL / 2 */
- freq = extal_mhz * (1000000 / 2);
-
- /* Remap "armgcnt address map" space */
- base = ioremap(0xe6080000, PAGE_SIZE);
-
- /* Update registers with correct frequency */
- iowrite32(freq, base + CNTFID0);
- asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq));
-
- /* make sure arch timer is started by setting bit 0 of CNTCR */
- iowrite32(1, base + CNTCR);
- iounmap(base);
-#endif /* CONFIG_ARM_ARCH_TIMER */
-
- clocksource_of_init();
-}
-
-void __init r8a7790_init_delay(void)
+void __init r8a7790_init_early(void)
{
#ifndef CONFIG_ARM_ARCH_TIMER
shmobile_setup_delay(1300, 2, 4); /* Cortex-A15 @ 1300MHz */
@@ -276,14 +211,15 @@
#ifdef CONFIG_USE_OF
-static const char *r8a7790_boards_compat_dt[] __initdata = {
+static const char * const r8a7790_boards_compat_dt[] __initconst = {
"renesas,r8a7790",
NULL,
};
DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)")
- .init_early = r8a7790_init_delay,
- .init_time = r8a7790_timer_init,
+ .smp = smp_ops(r8a7790_smp_ops),
+ .init_early = r8a7790_init_early,
+ .init_time = rcar_gen2_timer_init,
.dt_compat = r8a7790_boards_compat_dt,
MACHINE_END
#endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c
new file mode 100644
index 0000000..d9393d6
--- /dev/null
+++ b/arch/arm/mach-shmobile/setup-r8a7791.c
@@ -0,0 +1,184 @@
+/*
+ * r8a7791 processor support
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/of_platform.h>
+#include <linux/platform_data/irq-renesas-irqc.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
+#include <mach/common.h>
+#include <mach/irqs.h>
+#include <mach/r8a7791.h>
+#include <mach/rcar-gen2.h>
+#include <asm/mach/arch.h>
+
+#define SCIF_COMMON(scif_type, baseaddr, irq) \
+ .type = scif_type, \
+ .mapbase = baseaddr, \
+ .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \
+ .irqs = SCIx_IRQ_MUXED(irq)
+
+#define SCIFA_DATA(index, baseaddr, irq) \
+[index] = { \
+ SCIF_COMMON(PORT_SCIFA, baseaddr, irq), \
+ .scbrr_algo_id = SCBRR_ALGO_4, \
+ .scscr = SCSCR_RE | SCSCR_TE, \
+}
+
+#define SCIFB_DATA(index, baseaddr, irq) \
+[index] = { \
+ SCIF_COMMON(PORT_SCIFB, baseaddr, irq), \
+ .scbrr_algo_id = SCBRR_ALGO_4, \
+ .scscr = SCSCR_RE | SCSCR_TE, \
+}
+
+#define SCIF_DATA(index, baseaddr, irq) \
+[index] = { \
+ SCIF_COMMON(PORT_SCIF, baseaddr, irq), \
+ .scbrr_algo_id = SCBRR_ALGO_2, \
+ .scscr = SCSCR_RE | SCSCR_TE, \
+}
+
+#define HSCIF_DATA(index, baseaddr, irq) \
+[index] = { \
+ SCIF_COMMON(PORT_HSCIF, baseaddr, irq), \
+ .scbrr_algo_id = SCBRR_ALGO_6, \
+ .scscr = SCSCR_RE | SCSCR_TE, \
+}
+
+enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFA2, SCIF0, SCIF1,
+ SCIF2, SCIF3, SCIF4, SCIF5, SCIFA3, SCIFA4, SCIFA5 };
+
+static const struct plat_sci_port scif[] __initconst = {
+ SCIFA_DATA(SCIFA0, 0xe6c40000, gic_spi(144)), /* SCIFA0 */
+ SCIFA_DATA(SCIFA1, 0xe6c50000, gic_spi(145)), /* SCIFA1 */
+ SCIFB_DATA(SCIFB0, 0xe6c20000, gic_spi(148)), /* SCIFB0 */
+ SCIFB_DATA(SCIFB1, 0xe6c30000, gic_spi(149)), /* SCIFB1 */
+ SCIFB_DATA(SCIFB2, 0xe6ce0000, gic_spi(150)), /* SCIFB2 */
+ SCIFA_DATA(SCIFA2, 0xe6c60000, gic_spi(151)), /* SCIFA2 */
+ SCIF_DATA(SCIF0, 0xe6e60000, gic_spi(152)), /* SCIF0 */
+ SCIF_DATA(SCIF1, 0xe6e68000, gic_spi(153)), /* SCIF1 */
+ SCIF_DATA(SCIF2, 0xe6e58000, gic_spi(22)), /* SCIF2 */
+ SCIF_DATA(SCIF3, 0xe6ea8000, gic_spi(23)), /* SCIF3 */
+ SCIF_DATA(SCIF4, 0xe6ee0000, gic_spi(24)), /* SCIF4 */
+ SCIF_DATA(SCIF5, 0xe6ee8000, gic_spi(25)), /* SCIF5 */
+ SCIFA_DATA(SCIFA3, 0xe6c70000, gic_spi(29)), /* SCIFA3 */
+ SCIFA_DATA(SCIFA4, 0xe6c78000, gic_spi(30)), /* SCIFA4 */
+ SCIFA_DATA(SCIFA5, 0xe6c80000, gic_spi(31)), /* SCIFA5 */
+};
+
+static inline void r8a7791_register_scif(int idx)
+{
+ platform_device_register_data(&platform_bus, "sh-sci", idx, &scif[idx],
+ sizeof(struct plat_sci_port));
+}
+
+static const struct sh_timer_config cmt00_platform_data __initconst = {
+ .name = "CMT00",
+ .timer_bit = 0,
+ .clockevent_rating = 80,
+};
+
+static const struct resource cmt00_resources[] __initconst = {
+ DEFINE_RES_MEM(0xffca0510, 0x0c),
+ DEFINE_RES_MEM(0xffca0500, 0x04),
+ DEFINE_RES_IRQ(gic_spi(142)), /* CMT0_0 */
+};
+
+#define r8a7791_register_cmt(idx) \
+ platform_device_register_resndata(&platform_bus, "sh_cmt", \
+ idx, cmt##idx##_resources, \
+ ARRAY_SIZE(cmt##idx##_resources), \
+ &cmt##idx##_platform_data, \
+ sizeof(struct sh_timer_config))
+
+static struct renesas_irqc_config irqc0_data = {
+ .irq_base = irq_pin(0), /* IRQ0 -> IRQ9 */
+};
+
+static struct resource irqc0_resources[] = {
+ DEFINE_RES_MEM(0xe61c0000, 0x200), /* IRQC Event Detector Block_0 */
+ DEFINE_RES_IRQ(gic_spi(0)), /* IRQ0 */
+ DEFINE_RES_IRQ(gic_spi(1)), /* IRQ1 */
+ DEFINE_RES_IRQ(gic_spi(2)), /* IRQ2 */
+ DEFINE_RES_IRQ(gic_spi(3)), /* IRQ3 */
+ DEFINE_RES_IRQ(gic_spi(12)), /* IRQ4 */
+ DEFINE_RES_IRQ(gic_spi(13)), /* IRQ5 */
+ DEFINE_RES_IRQ(gic_spi(14)), /* IRQ6 */
+ DEFINE_RES_IRQ(gic_spi(15)), /* IRQ7 */
+ DEFINE_RES_IRQ(gic_spi(16)), /* IRQ8 */
+ DEFINE_RES_IRQ(gic_spi(17)), /* IRQ9 */
+};
+
+#define r8a7791_register_irqc(idx) \
+ platform_device_register_resndata(&platform_bus, "renesas_irqc", \
+ idx, irqc##idx##_resources, \
+ ARRAY_SIZE(irqc##idx##_resources), \
+ &irqc##idx##_data, \
+ sizeof(struct renesas_irqc_config))
+
+void __init r8a7791_add_dt_devices(void)
+{
+ r8a7791_register_scif(SCIFA0);
+ r8a7791_register_scif(SCIFA1);
+ r8a7791_register_scif(SCIFB0);
+ r8a7791_register_scif(SCIFB1);
+ r8a7791_register_scif(SCIFB2);
+ r8a7791_register_scif(SCIFA2);
+ r8a7791_register_scif(SCIF0);
+ r8a7791_register_scif(SCIF1);
+ r8a7791_register_scif(SCIF2);
+ r8a7791_register_scif(SCIF3);
+ r8a7791_register_scif(SCIF4);
+ r8a7791_register_scif(SCIF5);
+ r8a7791_register_scif(SCIFA3);
+ r8a7791_register_scif(SCIFA4);
+ r8a7791_register_scif(SCIFA5);
+ r8a7791_register_cmt(00);
+}
+
+void __init r8a7791_add_standard_devices(void)
+{
+ r8a7791_add_dt_devices();
+ r8a7791_register_irqc(0);
+}
+
+void __init r8a7791_init_early(void)
+{
+#ifndef CONFIG_ARM_ARCH_TIMER
+ shmobile_setup_delay(1300, 2, 4); /* Cortex-A15 @ 1300MHz */
+#endif
+}
+
+#ifdef CONFIG_USE_OF
+static const char *r8a7791_boards_compat_dt[] __initdata = {
+ "renesas,r8a7791",
+ NULL,
+};
+
+DT_MACHINE_START(R8A7791_DT, "Generic R8A7791 (Flattened Device Tree)")
+ .smp = smp_ops(r8a7791_smp_ops),
+ .init_early = r8a7791_init_early,
+ .init_time = rcar_gen2_timer_init,
+ .dt_compat = r8a7791_boards_compat_dt,
+MACHINE_END
+#endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
new file mode 100644
index 0000000..5734c24
--- /dev/null
+++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -0,0 +1,91 @@
+/*
+ * R-Car Generation 2 support
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/clocksource.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <mach/common.h>
+#include <mach/rcar-gen2.h>
+#include <asm/mach/arch.h>
+
+#define MODEMR 0xe6160060
+
+u32 __init rcar_gen2_read_mode_pins(void)
+{
+ void __iomem *modemr = ioremap_nocache(MODEMR, 4);
+ u32 mode;
+
+ BUG_ON(!modemr);
+ mode = ioread32(modemr);
+ iounmap(modemr);
+
+ return mode;
+}
+
+#define CNTCR 0
+#define CNTFID0 0x20
+
+void __init rcar_gen2_timer_init(void)
+{
+#ifdef CONFIG_ARM_ARCH_TIMER
+ u32 mode = rcar_gen2_read_mode_pins();
+ void __iomem *base;
+ int extal_mhz = 0;
+ u32 freq;
+
+ /* At Linux boot time the r8a7790 arch timer comes up
+ * with the counter disabled. Moreover, it may also report
+ * a potentially incorrect fixed 13 MHz frequency. To be
+ * correct these registers need to be updated to use the
+ * frequency EXTAL / 2 which can be determined by the MD pins.
+ */
+
+ switch (mode & (MD(14) | MD(13))) {
+ case 0:
+ extal_mhz = 15;
+ break;
+ case MD(13):
+ extal_mhz = 20;
+ break;
+ case MD(14):
+ extal_mhz = 26;
+ break;
+ case MD(13) | MD(14):
+ extal_mhz = 30;
+ break;
+ }
+
+ /* The arch timer frequency equals EXTAL / 2 */
+ freq = extal_mhz * (1000000 / 2);
+
+ /* Remap "armgcnt address map" space */
+ base = ioremap(0xe6080000, PAGE_SIZE);
+
+ /* Update registers with correct frequency */
+ iowrite32(freq, base + CNTFID0);
+ asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq));
+
+ /* make sure arch timer is started by setting bit 0 of CNTCR */
+ iowrite32(1, base + CNTCR);
+ iounmap(base);
+#endif /* CONFIG_ARM_ARCH_TIMER */
+
+ clocksource_of_init();
+}
diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c
index 522de5e..f2ca923 100644
--- a/arch/arm/mach-shmobile/smp-emev2.c
+++ b/arch/arm/mach-shmobile/smp-emev2.c
@@ -34,12 +34,6 @@
static int emev2_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
- int ret;
-
- ret = shmobile_smp_scu_boot_secondary(cpu, idle);
- if (ret)
- return ret;
-
arch_send_wakeup_ipi_mask(cpumask_of(cpu_logical_map(cpu)));
return 0;
}
diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c
index 0f05e9f..627c1f0 100644
--- a/arch/arm/mach-shmobile/smp-r8a7779.c
+++ b/arch/arm/mach-shmobile/smp-r8a7779.c
@@ -87,10 +87,6 @@
unsigned int lcpu = cpu_logical_map(cpu);
int ret;
- ret = shmobile_smp_scu_boot_secondary(cpu, idle);
- if (ret)
- return ret;
-
if (lcpu < ARRAY_SIZE(r8a7779_ch_cpu))
ch = r8a7779_ch_cpu[lcpu];
diff --git a/arch/arm/mach-shmobile/smp-r8a7790.c b/arch/arm/mach-shmobile/smp-r8a7790.c
new file mode 100644
index 0000000..015e275
--- /dev/null
+++ b/arch/arm/mach-shmobile/smp-r8a7790.c
@@ -0,0 +1,67 @@
+/*
+ * SMP support for r8a7790
+ *
+ * Copyright (C) 2012-2013 Renesas Solutions Corp.
+ * Copyright (C) 2012 Takashi Yoshii <takashi.yoshii.ze@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <asm/smp_plat.h>
+#include <mach/common.h>
+
+#define RST 0xe6160000
+#define CA15BAR 0x0020
+#define CA7BAR 0x0030
+#define CA15RESCNT 0x0040
+#define CA7RESCNT 0x0044
+#define MERAM 0xe8080000
+
+static void __init r8a7790_smp_prepare_cpus(unsigned int max_cpus)
+{
+ void __iomem *p;
+ u32 bar;
+
+ /* let APMU code install data related to shmobile_boot_vector */
+ shmobile_smp_apmu_prepare_cpus(max_cpus);
+
+ /* MERAM for jump stub, because BAR requires 256KB aligned address */
+ p = ioremap_nocache(MERAM, shmobile_boot_size);
+ memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size);
+ iounmap(p);
+
+ /* setup reset vectors */
+ p = ioremap_nocache(RST, 0x63);
+ bar = (MERAM >> 8) & 0xfffffc00;
+ writel_relaxed(bar, p + CA15BAR);
+ writel_relaxed(bar, p + CA7BAR);
+ writel_relaxed(bar | 0x10, p + CA15BAR);
+ writel_relaxed(bar | 0x10, p + CA7BAR);
+
+ /* enable clocks to all CPUs */
+ writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) | 0xa5a50000,
+ p + CA15RESCNT);
+ writel_relaxed((readl_relaxed(p + CA7RESCNT) & ~0x0f) | 0x5a5a0000,
+ p + CA7RESCNT);
+ iounmap(p);
+}
+
+struct smp_operations r8a7790_smp_ops __initdata = {
+ .smp_prepare_cpus = r8a7790_smp_prepare_cpus,
+ .smp_boot_secondary = shmobile_smp_apmu_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_disable = shmobile_smp_cpu_disable,
+ .cpu_die = shmobile_smp_apmu_cpu_die,
+ .cpu_kill = shmobile_smp_apmu_cpu_kill,
+#endif
+};
diff --git a/arch/arm/mach-shmobile/smp-r8a7791.c b/arch/arm/mach-shmobile/smp-r8a7791.c
new file mode 100644
index 0000000..2df5bd1
--- /dev/null
+++ b/arch/arm/mach-shmobile/smp-r8a7791.c
@@ -0,0 +1,62 @@
+/*
+ * SMP support for r8a7791
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <asm/smp_plat.h>
+#include <mach/common.h>
+#include <mach/r8a7791.h>
+
+#define RST 0xe6160000
+#define CA15BAR 0x0020
+#define CA15RESCNT 0x0040
+#define RAM 0xe6300000
+
+static void __init r8a7791_smp_prepare_cpus(unsigned int max_cpus)
+{
+ void __iomem *p;
+ u32 bar;
+
+ /* let APMU code install data related to shmobile_boot_vector */
+ shmobile_smp_apmu_prepare_cpus(max_cpus);
+
+ /* RAM for jump stub, because BAR requires 256KB aligned address */
+ p = ioremap_nocache(RAM, shmobile_boot_size);
+ memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size);
+ iounmap(p);
+
+ /* setup reset vectors */
+ p = ioremap_nocache(RST, 0x63);
+ bar = (RAM >> 8) & 0xfffffc00;
+ writel_relaxed(bar, p + CA15BAR);
+ writel_relaxed(bar | 0x10, p + CA15BAR);
+
+ /* enable clocks to all CPUs */
+ writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) | 0xa5a50000,
+ p + CA15RESCNT);
+ iounmap(p);
+}
+
+struct smp_operations r8a7791_smp_ops __initdata = {
+ .smp_prepare_cpus = r8a7791_smp_prepare_cpus,
+ .smp_boot_secondary = shmobile_smp_apmu_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_disable = shmobile_smp_cpu_disable,
+ .cpu_die = shmobile_smp_apmu_cpu_die,
+ .cpu_kill = shmobile_smp_apmu_cpu_kill,
+#endif
+};
diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index 0baa244..13ba36a 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -46,11 +46,6 @@
static int sh73a0_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
unsigned int lcpu = cpu_logical_map(cpu);
- int ret;
-
- ret = shmobile_smp_scu_boot_secondary(cpu, idle);
- if (ret)
- return ret;
if (((__raw_readl(PSTR) >> (4 * lcpu)) & 3) == 3)
__raw_writel(1 << lcpu, WUPCR); /* wake up */
@@ -71,18 +66,11 @@
shmobile_smp_scu_prepare_cpus(max_cpus);
}
-#ifdef CONFIG_HOTPLUG_CPU
-static int sh73a0_cpu_disable(unsigned int cpu)
-{
- return 0; /* CPU0 and CPU1 supported */
-}
-#endif /* CONFIG_HOTPLUG_CPU */
-
struct smp_operations sh73a0_smp_ops __initdata = {
.smp_prepare_cpus = sh73a0_smp_prepare_cpus,
.smp_boot_secondary = sh73a0_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
- .cpu_disable = sh73a0_cpu_disable,
+ .cpu_disable = shmobile_smp_cpu_disable,
.cpu_die = shmobile_smp_scu_cpu_die,
.cpu_kill = shmobile_smp_scu_cpu_kill,
#endif
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index 4fb1f03..335beb3 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -87,8 +87,12 @@
#endif
#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
+# define soc_is_s3c6400() is_samsung_s3c6400()
+# define soc_is_s3c6410() is_samsung_s3c6410()
# define soc_is_s3c64xx() (is_samsung_s3c6400() || is_samsung_s3c6410())
#else
+# define soc_is_s3c6400() 0
+# define soc_is_s3c6410() 0
# define soc_is_s3c64xx() 0
#endif
diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile
index 3413380..8eb4799 100644
--- a/drivers/clk/samsung/Makefile
+++ b/drivers/clk/samsung/Makefile
@@ -8,6 +8,4 @@
obj-$(CONFIG_SOC_EXYNOS5420) += clk-exynos5420.o
obj-$(CONFIG_SOC_EXYNOS5440) += clk-exynos5440.o
obj-$(CONFIG_ARCH_EXYNOS) += clk-exynos-audss.o
-ifdef CONFIG_COMMON_CLK
obj-$(CONFIG_ARCH_S3C64XX) += clk-s3c64xx.o
-endif
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
index 4919afa..1adff32 100644
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -47,10 +47,10 @@
dev_dbg(&dev->dev, "s3c2410_start_hc:\n");
- clk_enable(usb_clk);
+ clk_prepare_enable(usb_clk);
mdelay(2); /* let the bus clock stabilise */
- clk_enable(clk);
+ clk_prepare_enable(clk);
if (info != NULL) {
info->hcd = hcd;
@@ -75,8 +75,8 @@
(info->enable_oc)(info, 0);
}
- clk_disable(clk);
- clk_disable(usb_clk);
+ clk_disable_unprepare(clk);
+ clk_disable_unprepare(usb_clk);
}
/* ohci_s3c2410_hub_status_data