| /* |
| * Apple "Magic" Wireless Mouse driver |
| * |
| * Copyright (c) 2010 Michael Poole <mdpoole@troilus.org> |
| */ |
| |
| /* |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the Free |
| * Software Foundation; either version 2 of the License, or (at your option) |
| * any later version. |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/hid.h> |
| #include <linux/module.h> |
| #include <linux/usb.h> |
| |
| #include "hid-ids.h" |
| |
| static bool emulate_3button = true; |
| module_param(emulate_3button, bool, 0644); |
| MODULE_PARM_DESC(emulate_3button, "Emulate a middle button"); |
| |
| static int middle_button_start = -350; |
| static int middle_button_stop = +350; |
| |
| static bool emulate_scroll_wheel = true; |
| module_param(emulate_scroll_wheel, bool, 0644); |
| MODULE_PARM_DESC(emulate_scroll_wheel, "Emulate a scroll wheel"); |
| |
| static bool report_touches = true; |
| module_param(report_touches, bool, 0644); |
| MODULE_PARM_DESC(report_touches, "Emit touch records (otherwise, only use them for emulation)"); |
| |
| static bool report_undeciphered; |
| module_param(report_undeciphered, bool, 0644); |
| MODULE_PARM_DESC(report_undeciphered, "Report undeciphered multi-touch state field using a MSC_RAW event"); |
| |
| #define TOUCH_REPORT_ID 0x29 |
| /* These definitions are not precise, but they're close enough. (Bits |
| * 0x03 seem to indicate the aspect ratio of the touch, bits 0x70 seem |
| * to be some kind of bit mask -- 0x20 may be a near-field reading, |
| * and 0x40 is actual contact, and 0x10 may be a start/stop or change |
| * indication.) |
| */ |
| #define TOUCH_STATE_MASK 0xf0 |
| #define TOUCH_STATE_NONE 0x00 |
| #define TOUCH_STATE_START 0x30 |
| #define TOUCH_STATE_DRAG 0x40 |
| |
| /** |
| * struct magicmouse_sc - Tracks Magic Mouse-specific data. |
| * @input: Input device through which we report events. |
| * @quirks: Currently unused. |
| * @last_timestamp: Timestamp from most recent (18-bit) touch report |
| * (units of milliseconds over short windows, but seems to |
| * increase faster when there are no touches). |
| * @delta_time: 18-bit difference between the two most recent touch |
| * reports from the mouse. |
| * @ntouches: Number of touches in most recent touch report. |
| * @scroll_accel: Number of consecutive scroll motions. |
| * @scroll_jiffies: Time of last scroll motion. |
| * @touches: Most recent data for a touch, indexed by tracking ID. |
| * @tracking_ids: Mapping of current touch input data to @touches. |
| */ |
| struct magicmouse_sc { |
| struct input_dev *input; |
| unsigned long quirks; |
| |
| int last_timestamp; |
| int delta_time; |
| int ntouches; |
| int scroll_accel; |
| unsigned long scroll_jiffies; |
| |
| struct { |
| short x; |
| short y; |
| short scroll_y; |
| u8 size; |
| } touches[16]; |
| int tracking_ids[16]; |
| }; |
| |
| static int magicmouse_firm_touch(struct magicmouse_sc *msc) |
| { |
| int touch = -1; |
| int ii; |
| |
| /* If there is only one "firm" touch, set touch to its |
| * tracking ID. |
| */ |
| for (ii = 0; ii < msc->ntouches; ii++) { |
| int idx = msc->tracking_ids[ii]; |
| if (msc->touches[idx].size < 8) { |
| /* Ignore this touch. */ |
| } else if (touch >= 0) { |
| touch = -1; |
| break; |
| } else { |
| touch = idx; |
| } |
| } |
| |
| return touch; |
| } |
| |
| static void magicmouse_emit_buttons(struct magicmouse_sc *msc, int state) |
| { |
| int last_state = test_bit(BTN_LEFT, msc->input->key) << 0 | |
| test_bit(BTN_RIGHT, msc->input->key) << 1 | |
| test_bit(BTN_MIDDLE, msc->input->key) << 2; |
| |
| if (emulate_3button) { |
| int id; |
| |
| /* If some button was pressed before, keep it held |
| * down. Otherwise, if there's exactly one firm |
| * touch, use that to override the mouse's guess. |
| */ |
| if (state == 0) { |
| /* The button was released. */ |
| } else if (last_state != 0) { |
| state = last_state; |
| } else if ((id = magicmouse_firm_touch(msc)) >= 0) { |
| int x = msc->touches[id].x; |
| if (x < middle_button_start) |
| state = 1; |
| else if (x > middle_button_stop) |
| state = 2; |
| else |
| state = 4; |
| } /* else: we keep the mouse's guess */ |
| |
| input_report_key(msc->input, BTN_MIDDLE, state & 4); |
| } |
| |
| input_report_key(msc->input, BTN_LEFT, state & 1); |
| input_report_key(msc->input, BTN_RIGHT, state & 2); |
| |
| if (state != last_state) |
| msc->scroll_accel = 0; |
| } |
| |
| static void magicmouse_emit_touch(struct magicmouse_sc *msc, int raw_id, u8 *tdata) |
| { |
| struct input_dev *input = msc->input; |
| __s32 x_y = tdata[0] << 8 | tdata[1] << 16 | tdata[2] << 24; |
| int misc = tdata[5] | tdata[6] << 8; |
| int id = (misc >> 6) & 15; |
| int x = x_y << 12 >> 20; |
| int y = -(x_y >> 20); |
| |
| /* Store tracking ID and other fields. */ |
| msc->tracking_ids[raw_id] = id; |
| msc->touches[id].x = x; |
| msc->touches[id].y = y; |
| msc->touches[id].size = misc & 63; |
| |
| /* If requested, emulate a scroll wheel by detecting small |
| * vertical touch motions along the middle of the mouse. |
| */ |
| if (emulate_scroll_wheel && |
| middle_button_start < x && x < middle_button_stop) { |
| static const int accel_profile[] = { |
| 256, 228, 192, 160, 128, 96, 64, 32, |
| }; |
| unsigned long now = jiffies; |
| int step = msc->touches[id].scroll_y - y; |
| |
| /* Reset acceleration after half a second. */ |
| if (time_after(now, msc->scroll_jiffies + HZ / 2)) |
| msc->scroll_accel = 0; |
| |
| /* Calculate and apply the scroll motion. */ |
| switch (tdata[7] & TOUCH_STATE_MASK) { |
| case TOUCH_STATE_START: |
| msc->touches[id].scroll_y = y; |
| msc->scroll_accel = min_t(int, msc->scroll_accel + 1, |
| ARRAY_SIZE(accel_profile) - 1); |
| break; |
| case TOUCH_STATE_DRAG: |
| step = step / accel_profile[msc->scroll_accel]; |
| if (step != 0) { |
| msc->touches[id].scroll_y = y; |
| msc->scroll_jiffies = now; |
| input_report_rel(input, REL_WHEEL, step); |
| } |
| break; |
| } |
| } |
| |
| /* Generate the input events for this touch. */ |
| if (report_touches) { |
| int orientation = (misc >> 10) - 32; |
| |
| input_report_abs(input, ABS_MT_TRACKING_ID, id); |
| input_report_abs(input, ABS_MT_TOUCH_MAJOR, tdata[3]); |
| input_report_abs(input, ABS_MT_TOUCH_MINOR, tdata[4]); |
| input_report_abs(input, ABS_MT_ORIENTATION, orientation); |
| input_report_abs(input, ABS_MT_POSITION_X, x); |
| input_report_abs(input, ABS_MT_POSITION_Y, y); |
| |
| if (report_undeciphered) |
| input_event(input, EV_MSC, MSC_RAW, tdata[7]); |
| |
| input_mt_sync(input); |
| } |
| } |
| |
| static int magicmouse_raw_event(struct hid_device *hdev, |
| struct hid_report *report, u8 *data, int size) |
| { |
| struct magicmouse_sc *msc = hid_get_drvdata(hdev); |
| struct input_dev *input = msc->input; |
| int x, y, ts, ii, clicks; |
| |
| switch (data[0]) { |
| case 0x10: |
| if (size != 6) |
| return 0; |
| x = (__s16)(data[2] | data[3] << 8); |
| y = (__s16)(data[4] | data[5] << 8); |
| clicks = data[1]; |
| break; |
| case TOUCH_REPORT_ID: |
| /* Expect six bytes of prefix, and N*8 bytes of touch data. */ |
| if (size < 6 || ((size - 6) % 8) != 0) |
| return 0; |
| ts = data[3] >> 6 | data[4] << 2 | data[5] << 10; |
| msc->delta_time = (ts - msc->last_timestamp) & 0x3ffff; |
| msc->last_timestamp = ts; |
| msc->ntouches = (size - 6) / 8; |
| for (ii = 0; ii < msc->ntouches; ii++) |
| magicmouse_emit_touch(msc, ii, data + ii * 8 + 6); |
| /* When emulating three-button mode, it is important |
| * to have the current touch information before |
| * generating a click event. |
| */ |
| x = (signed char)data[1]; |
| y = (signed char)data[2]; |
| clicks = data[3]; |
| break; |
| case 0x20: /* Theoretically battery status (0-100), but I have |
| * never seen it -- maybe it is only upon request. |
| */ |
| case 0x60: /* Unknown, maybe laser on/off. */ |
| case 0x61: /* Laser reflection status change. |
| * data[1]: 0 = spotted, 1 = lost |
| */ |
| default: |
| return 0; |
| } |
| |
| magicmouse_emit_buttons(msc, clicks & 3); |
| input_report_rel(input, REL_X, x); |
| input_report_rel(input, REL_Y, y); |
| input_sync(input); |
| return 1; |
| } |
| |
| static int magicmouse_input_open(struct input_dev *dev) |
| { |
| struct hid_device *hid = input_get_drvdata(dev); |
| |
| return hid->ll_driver->open(hid); |
| } |
| |
| static void magicmouse_input_close(struct input_dev *dev) |
| { |
| struct hid_device *hid = input_get_drvdata(dev); |
| |
| hid->ll_driver->close(hid); |
| } |
| |
| static void magicmouse_setup_input(struct input_dev *input, struct hid_device *hdev) |
| { |
| input_set_drvdata(input, hdev); |
| input->event = hdev->ll_driver->hidinput_input_event; |
| input->open = magicmouse_input_open; |
| input->close = magicmouse_input_close; |
| |
| input->name = hdev->name; |
| input->phys = hdev->phys; |
| input->uniq = hdev->uniq; |
| input->id.bustype = hdev->bus; |
| input->id.vendor = hdev->vendor; |
| input->id.product = hdev->product; |
| input->id.version = hdev->version; |
| input->dev.parent = hdev->dev.parent; |
| |
| __set_bit(EV_KEY, input->evbit); |
| __set_bit(BTN_LEFT, input->keybit); |
| __set_bit(BTN_RIGHT, input->keybit); |
| if (emulate_3button) |
| __set_bit(BTN_MIDDLE, input->keybit); |
| __set_bit(BTN_TOOL_FINGER, input->keybit); |
| |
| __set_bit(EV_REL, input->evbit); |
| __set_bit(REL_X, input->relbit); |
| __set_bit(REL_Y, input->relbit); |
| if (emulate_scroll_wheel) |
| __set_bit(REL_WHEEL, input->relbit); |
| |
| if (report_touches) { |
| __set_bit(EV_ABS, input->evbit); |
| |
| input_set_abs_params(input, ABS_MT_TRACKING_ID, 0, 15, 0, 0); |
| input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 255, 4, 0); |
| input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 255, 4, 0); |
| input_set_abs_params(input, ABS_MT_ORIENTATION, -32, 31, 1, 0); |
| input_set_abs_params(input, ABS_MT_POSITION_X, -1100, 1358, |
| 4, 0); |
| /* Note: Touch Y position from the device is inverted relative |
| * to how pointer motion is reported (and relative to how USB |
| * HID recommends the coordinates work). This driver keeps |
| * the origin at the same position, and just uses the additive |
| * inverse of the reported Y. |
| */ |
| input_set_abs_params(input, ABS_MT_POSITION_Y, -1589, 2047, |
| 4, 0); |
| } |
| |
| if (report_undeciphered) { |
| __set_bit(EV_MSC, input->evbit); |
| __set_bit(MSC_RAW, input->mscbit); |
| } |
| } |
| |
| static int magicmouse_probe(struct hid_device *hdev, |
| const struct hid_device_id *id) |
| { |
| __u8 feature_1[] = { 0xd7, 0x01 }; |
| __u8 feature_2[] = { 0xf8, 0x01, 0x32 }; |
| struct input_dev *input; |
| struct magicmouse_sc *msc; |
| struct hid_report *report; |
| int ret; |
| |
| msc = kzalloc(sizeof(*msc), GFP_KERNEL); |
| if (msc == NULL) { |
| dev_err(&hdev->dev, "can't alloc magicmouse descriptor\n"); |
| return -ENOMEM; |
| } |
| |
| msc->quirks = id->driver_data; |
| hid_set_drvdata(hdev, msc); |
| |
| ret = hid_parse(hdev); |
| if (ret) { |
| dev_err(&hdev->dev, "magicmouse hid parse failed\n"); |
| goto err_free; |
| } |
| |
| ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT & ~HID_CONNECT_HIDINPUT); |
| if (ret) { |
| dev_err(&hdev->dev, "magicmouse hw start failed\n"); |
| goto err_free; |
| } |
| |
| report = hid_register_report(hdev, HID_INPUT_REPORT, TOUCH_REPORT_ID); |
| if (!report) { |
| dev_err(&hdev->dev, "unable to register touch report\n"); |
| ret = -ENOMEM; |
| goto err_stop_hw; |
| } |
| report->size = 6; |
| |
| ret = hdev->hid_output_raw_report(hdev, feature_1, sizeof(feature_1), |
| HID_FEATURE_REPORT); |
| if (ret != sizeof(feature_1)) { |
| dev_err(&hdev->dev, "unable to request touch data (1:%d)\n", |
| ret); |
| goto err_stop_hw; |
| } |
| ret = hdev->hid_output_raw_report(hdev, feature_2, |
| sizeof(feature_2), HID_FEATURE_REPORT); |
| if (ret != sizeof(feature_2)) { |
| dev_err(&hdev->dev, "unable to request touch data (2:%d)\n", |
| ret); |
| goto err_stop_hw; |
| } |
| |
| input = input_allocate_device(); |
| if (!input) { |
| dev_err(&hdev->dev, "can't alloc input device\n"); |
| ret = -ENOMEM; |
| goto err_stop_hw; |
| } |
| magicmouse_setup_input(input, hdev); |
| |
| ret = input_register_device(input); |
| if (ret) { |
| dev_err(&hdev->dev, "input device registration failed\n"); |
| goto err_input; |
| } |
| msc->input = input; |
| |
| return 0; |
| err_input: |
| input_free_device(input); |
| err_stop_hw: |
| hid_hw_stop(hdev); |
| err_free: |
| kfree(msc); |
| return ret; |
| } |
| |
| static void magicmouse_remove(struct hid_device *hdev) |
| { |
| struct magicmouse_sc *msc = hid_get_drvdata(hdev); |
| |
| hid_hw_stop(hdev); |
| input_unregister_device(msc->input); |
| kfree(msc); |
| } |
| |
| static const struct hid_device_id magic_mice[] = { |
| { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MAGICMOUSE), |
| .driver_data = 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(hid, magic_mice); |
| |
| static struct hid_driver magicmouse_driver = { |
| .name = "magicmouse", |
| .id_table = magic_mice, |
| .probe = magicmouse_probe, |
| .remove = magicmouse_remove, |
| .raw_event = magicmouse_raw_event, |
| }; |
| |
| static int __init magicmouse_init(void) |
| { |
| int ret; |
| |
| ret = hid_register_driver(&magicmouse_driver); |
| if (ret) |
| printk(KERN_ERR "can't register magicmouse driver\n"); |
| |
| return ret; |
| } |
| |
| static void __exit magicmouse_exit(void) |
| { |
| hid_unregister_driver(&magicmouse_driver); |
| } |
| |
| module_init(magicmouse_init); |
| module_exit(magicmouse_exit); |
| MODULE_LICENSE("GPL"); |