libata: Add a host flag to indicate lack of IORDY capability
This is the first preparation to doing the !IORDY cases properly. Further
diffs will then add the needed logic to do it right.
Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Tejun Heo <htejun@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index 4223e10..98c1fee 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -89,9 +89,10 @@
static int ht6560a; /* HT 6560A on primary 1, secondary 2, both 3 */
static int ht6560b; /* HT 6560A on primary 1, secondary 2, both 3 */
static int opti82c611a; /* Opti82c611A on primary 1, secondary 2, both 3 */
-static int opti82c46x; /* Opti 82c465MV present (pri/sec autodetect) */
+static int opti82c46x; /* Opti 82c465MV present (pri/sec autodetect) */
static int autospeed; /* Chip present which snoops speed changes */
static int pio_mask = 0x1F; /* PIO range for autospeed devices */
+static int iordy_mask = 0xFFFFFFFF; /* Use iordy if available */
/**
* legacy_set_mode - mode setting
@@ -113,6 +114,7 @@
for (i = 0; i < ATA_MAX_DEVICES; i++) {
struct ata_device *dev = &ap->device[i];
if (ata_dev_enabled(dev)) {
+ ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
dev->pio_mode = XFER_PIO_0;
dev->xfer_mode = XFER_PIO_0;
dev->xfer_shift = ATA_SHIFT_PIO;
@@ -695,6 +697,7 @@
void __iomem *io_addr, *ctrl_addr;
int pio_modes = pio_mask;
u32 mask = (1 << port);
+ u32 iordy = (iordy_mask & mask) ? 0: ATA_FLAG_NO_IORDY;
int ret;
pdev = platform_device_register_simple(DRV_NAME, nr_legacy_host, NULL, 0);
@@ -715,6 +718,7 @@
if (ht6560a & mask) {
ops = &ht6560a_port_ops;
pio_modes = 0x07;
+ iordy = ATA_FLAG_NO_IORDY;
}
if (ht6560b & mask) {
ops = &ht6560b_port_ops;
@@ -750,6 +754,7 @@
printk(KERN_INFO "PDC20230-C/20630 VLB ATA controller detected.\n");
pio_modes = 0x07;
ops = &pdc20230_port_ops;
+ iordy = ATA_FLAG_NO_IORDY;
udelay(100);
inb(0x1F5);
} else {
@@ -767,6 +772,7 @@
/* Chip does mode setting by command snooping */
if (ops == &legacy_port_ops && (autospeed & mask))
ops = &simple_port_ops;
+
memset(&ae, 0, sizeof(struct ata_probe_ent));
INIT_LIST_HEAD(&ae.node);
ae.dev = &pdev->dev;
@@ -776,7 +782,7 @@
ae.pio_mask = pio_modes;
ae.irq = irq;
ae.irq_flags = 0;
- ae.port_flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST;
+ ae.port_flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST|iordy;
ae.port[0].cmd_addr = io_addr;
ae.port[0].altstatus_addr = ctrl_addr;
ae.port[0].ctl_addr = ctrl_addr;
@@ -945,6 +951,7 @@
module_param(opti82c611a, int, 0);
module_param(opti82c46x, int, 0);
module_param(pio_mask, int, 0);
+module_param(iordy_mask, int, 0);
module_init(legacy_init);
module_exit(legacy_exit);