pinctrl: as3722: Set pin to output mode for some function
If pins are used for function output like pwm, clk32k,
power good etc then set it as output mode default.
Signed-off-by: Mallikarjun Kasoju <mkasoju@nvidia.com>
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
diff --git a/drivers/pinctrl/pinctrl-as3722.c b/drivers/pinctrl/pinctrl-as3722.c
index 01bffc1..3be47ae 100644
--- a/drivers/pinctrl/pinctrl-as3722.c
+++ b/drivers/pinctrl/pinctrl-as3722.c
@@ -250,6 +250,26 @@
return ret;
}
as_pci->gpio_control[group].io_function = function;
+
+ switch (val) {
+ case AS3722_GPIO_IOSF_SD0_OUT:
+ case AS3722_GPIO_IOSF_PWR_GOOD_OUT:
+ case AS3722_GPIO_IOSF_Q32K_OUT:
+ case AS3722_GPIO_IOSF_PWM_OUT:
+ case AS3722_GPIO_IOSF_SD6_LOW_VOLT_LOW:
+ ret = as3722_update_bits(as_pci->as3722, gpio_cntr_reg,
+ AS3722_GPIO_MODE_MASK, AS3722_GPIO_MODE_OUTPUT_VDDH);
+ if (ret < 0) {
+ dev_err(as_pci->dev, "GPIO%d_CTRL update failed %d\n",
+ group, ret);
+ return ret;
+ }
+ as_pci->gpio_control[group].mode_prop =
+ AS3722_GPIO_MODE_OUTPUT_VDDH;
+ break;
+ default:
+ break;
+ }
return ret;
}