staging: Beeceem USB Wimax driver
The Sprint 4G network uses a Wimax dongle with Beecem
chipset. The driver is typical of out of tree drivers, but
maybe useful for people, and the hardware is readily available.
Here is a staging ready version (i.e warts and all)
0. Started with Rel_5.2.7.3P1_USB from Sprint4GDeveloperPack-1.1
1. Consolidated files in staging
2. Remove Dos cr/lf
3. Remove unnecessary ioctl from usbbcm_fops
Applied patches that were in the developer pack, surprising
there were ones for 2.6.35 already.
This is compile tested only, see TODO for what still needs
to be done.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/staging/bcm/Debug.h b/drivers/staging/bcm/Debug.h
new file mode 100644
index 0000000..3d788b5
--- /dev/null
+++ b/drivers/staging/bcm/Debug.h
@@ -0,0 +1,297 @@
+/*
+ * Debug.h
+ *
+ * Dynamic (runtime) debug framework implementation.
+ * -kaiwan.
+ */
+#ifndef _DEBUG_H
+#define _DEBUG_H
+#include <linux/string.h>
+#define NONE 0xFFFF
+
+typedef enum _BASE_TYPE
+{
+ BCM_BASE_TYPE_DEC,
+ BCM_BASE_TYPE_OCT,
+ BCM_BASE_TYPE_BIN,
+ BCM_BASE_TYPE_HEX,
+ BCM_BASE_TYPE_NONE,
+} BASE_TYPE, *PBASE_TYPE;
+
+int bcm_print_buffer( UINT debug_level, const char *function_name,
+ char *file_name, int line_number, unsigned char *buffer, int bufferlen, BASE_TYPE base);
+
+#ifdef BCM_SHM_INTERFACE
+#define CPE_VIRTUAL_ERROR_CODE_BASE_ADDR (0xBFC02E00 + 0x4C)
+// ERROR codes for debugging
+extern unsigned char u32ErrorCounter ;
+#define ERROR_DEVICE_REMOVED 0x1
+#define ERROR_LEADER_LENGTH_ZERO 0x2
+#define ERROR_LEADER_LENGTH_CORRUPTED 0x3
+#define ERROR_NO_SKBUFF 0x4
+
+#define ERROR_DL_MODULE 0xaa000000
+extern void CPE_ERROR_LOG(unsigned int module,unsigned int code);
+
+#endif
+
+
+
+
+//--------------------------------------------------------------------------------
+
+/* TYPE and SUBTYPE
+ * Define valid TYPE (or category or code-path, however you like to think of it)
+ * and SUBTYPE s.
+ * Type and SubType are treated as bitmasks.
+ */
+/*-----------------BEGIN TYPEs------------------------------------------*/
+#define DBG_TYPE_INITEXIT (1 << 0) // 1
+#define DBG_TYPE_TX (1 << 1) // 2
+#define DBG_TYPE_RX (1 << 2) // 4
+#define DBG_TYPE_OTHERS (1 << 3) // 8
+/*-----------------END TYPEs------------------------------------------*/
+#define NUMTYPES 4 // careful!
+
+/*-----------------BEGIN SUBTYPEs---------------------------------------*/
+
+/*-SUBTYPEs for TX : TYPE is DBG_TYPE_TX -----//
+ Transmit.c ,Arp.c, LeakyBucket.c, And Qos.c
+ total 17 macros */
+// Transmit.c
+#define TX 1
+#define MP_SEND (TX<<0)
+#define NEXT_SEND (TX<<1)
+#define TX_FIFO (TX<<2)
+#define TX_CONTROL (TX<<3)
+
+// Arp.c
+#define IP_ADDR (TX<<4)
+#define ARP_REQ (TX<<5)
+#define ARP_RESP (TX<<6)
+
+// dhcp.c
+//#define DHCP TX
+//#define DHCP_REQ (DHCP<<7)
+
+// Leakybucket.c
+#define TOKEN_COUNTS (TX<<8)
+#define CHECK_TOKENS (TX<<9)
+#define TX_PACKETS (TX<<10)
+#define TIMER (TX<<11)
+
+// Qos.c
+#define QOS TX
+#define QUEUE_INDEX (QOS<<12)
+#define IPV4_DBG (QOS<<13)
+#define IPV6_DBG (QOS<<14)
+#define PRUNE_QUEUE (QOS<<15)
+#define SEND_QUEUE (QOS<<16)
+
+//TX_Misc
+#define TX_OSAL_DBG (TX<<17)
+
+
+//--SUBTYPEs for ------INIT & EXIT---------------------
+/*------------ TYPE is DBG_TYPE_INITEXIT -----//
+DriverEntry.c, bcmfwup.c, ChipDetectTask.c, HaltnReset.c, InterfaceDDR.c */
+#define MP 1
+#define DRV_ENTRY (MP<<0)
+#define MP_INIT (MP<<1)
+#define READ_REG (MP<<3)
+#define DISPATCH (MP<<2)
+#define CLAIM_ADAP (MP<<4)
+#define REG_IO_PORT (MP<<5)
+#define INIT_DISP (MP<<6)
+#define RX_INIT (MP<<7)
+
+
+//-SUBTYPEs for --RX----------------------------------
+//------------RX : TYPE is DBG_TYPE_RX -----//
+// Receive.c
+#define RX 1
+#define RX_DPC (RX<<0)
+#define RX_CTRL (RX<<3)
+#define RX_DATA (RX<<4)
+#define MP_RETURN (RX<<1)
+#define LINK_MSG (RX<<2)
+
+
+//-SUBTYPEs for ----OTHER ROUTINES------------------
+//------------OTHERS : TYPE is DBG_TYPE_OTHER -----//
+// HaltnReset,CheckForHang,PnP,Misc,CmHost
+// total 12 macros
+#define OTHERS 1
+// ??ISR.C
+
+#define ISR OTHERS
+#define MP_DPC (ISR<<0)
+
+// HaltnReset.c
+#define HALT OTHERS
+#define MP_HALT (HALT<<1)
+#define CHECK_HANG (HALT<<2)
+#define MP_RESET (HALT<<3)
+#define MP_SHUTDOWN (HALT<<4)
+
+// pnp.c
+#define PNP OTHERS
+#define MP_PNP (PNP<<5)
+
+// Misc.c
+#define MISC OTHERS
+#define DUMP_INFO (MISC<<6)
+#define CLASSIFY (MISC<<7)
+#define LINK_UP_MSG (MISC<<8)
+#define CP_CTRL_PKT (MISC<<9)
+#define DUMP_CONTROL (MISC<<10)
+#define LED_DUMP_INFO (MISC<<11)
+
+// CmHost.c
+#define CMHOST OTHERS
+
+
+#define SERIAL (OTHERS<<12)
+#define IDLE_MODE (OTHERS<<13)
+
+#define WRM (OTHERS<<14)
+#define RDM (OTHERS<<15)
+
+// TODO - put PHS_SEND in Tx PHS_RECEIVE in Rx path ?
+#define PHS_SEND (OTHERS<<16)
+#define PHS_RECIEVE (OTHERS<<17)
+#define PHS_MODULE (OTHERS<<18)
+
+#define INTF_INIT (OTHERS<<19)
+#define INTF_ERR (OTHERS<<20)
+#define INTF_WARN (OTHERS<<21)
+#define INTF_NORM (OTHERS<<22)
+
+#define IRP_COMPLETION (OTHERS<<23)
+#define SF_DESCRIPTOR_CNTS (OTHERS<<24)
+#define PHS_DISPATCH (OTHERS << 25)
+#define OSAL_DBG (OTHERS << 26)
+#define NVM_RW (OTHERS << 27)
+
+#define HOST_MIBS (OTHERS << 28)
+#define CONN_MSG (CMHOST << 29)
+//#define OTHERS_MISC (OTHERS << 29) // ProcSupport.c
+/*-----------------END SUBTYPEs------------------------------------------*/
+
+
+/* Debug level
+ * We have 8 debug levels, in (numerical) increasing order of verbosity.
+ * IMP: Currently implementing ONLY DBG_LVL_ALL , i.e. , all debug prints will
+ * appear (of course, iff global debug flag is ON and we match the Type and SubType).
+ * Finer granularity debug levels are currently not in use, although the feature exists.
+ *
+ * Another way to say this:
+ * All the debug prints currently have 'debug_level' set to DBG_LVL_ALL .
+ * You can compile-time change that to any of the below, if you wish to. However, as of now, there's
+ * no dynamic facility to have the userspace 'TestApp' set debug_level. Slated for future expansion.
+ */
+#define BCM_ALL 7
+#define BCM_LOW 6
+#define BCM_PRINT 5
+#define BCM_NORMAL 4
+#define BCM_MEDIUM 3
+#define BCM_SCREAM 2
+#define BCM_ERR 1
+/* Not meant for developer in debug prints.
+ * To be used to disable all prints by setting the DBG_LVL_CURR to this value */
+#define BCM_NONE 0
+
+/* The current driver logging level.
+ * Everything at this level and (numerically) lower (meaning higher prio)
+ * is logged.
+* Replace 'BCM_ALL' in the DBG_LVL_CURR macro with the logging level desired.
+ * For eg. to set the logging level to 'errors only' use:
+ * #define DBG_LVL_CURR (BCM_ERR)
+ */
+
+#define DBG_LVL_CURR (BCM_ALL)
+#define DBG_LVL_ALL BCM_ALL
+
+/*---Userspace mapping of Debug State.
+ * Delibrately matches that of the Windows driver..
+ * The TestApp's ioctl passes this struct to us.
+ */
+typedef struct
+{
+ unsigned int Subtype, Type;
+ unsigned int OnOff;
+// unsigned int debug_level; /* future expansion */
+} __attribute__((packed)) USER_BCM_DBG_STATE;
+
+//---Kernel-space mapping of Debug State
+typedef struct _S_BCM_DEBUG_STATE {
+ UINT type;
+ /* A bitmap of 32 bits for Subtype per Type.
+ * Valid indexes in 'subtype' array are *only* 1,2,4 and 8,
+ * corresponding to valid Type values. Hence we use the 'Type' field
+ * as the index value, ignoring the array entries 0,3,5,6,7 !
+ */
+ UINT subtype[(NUMTYPES*2)+1];
+ UINT debug_level;
+} S_BCM_DEBUG_STATE;
+/* Instantiated in the Adapter structure */
+/* We'll reuse the debug level parameter to include a bit (the MSB) to indicate whether or not
+ * we want the function's name printed. */
+#define DBG_NO_FUNC_PRINT 1 << 31
+#define DBG_LVL_BITMASK 0xFF
+
+//--- Only for direct printk's; "hidden" to API.
+#define DBG_TYPE_PRINTK 3
+#define PRINTKS_ON 1 // "hidden" from API, set to 0 to turn off all printk's
+
+#define BCM_DEBUG_PRINT(Adapter, Type, SubType, dbg_level, string, args...) do { \
+ if ((DBG_TYPE_PRINTK == Type) && (PRINTKS_ON)) { \
+ printk ("%s:" string, __FUNCTION__, ##args); \
+ printk("\n"); \
+ } else if (!Adapter) \
+ ; \
+ else { \
+ if (((dbg_level & DBG_LVL_BITMASK) <= Adapter->stDebugState.debug_level) && \
+ ((Type & Adapter->stDebugState.type) && (SubType & Adapter->stDebugState.subtype[Type]))) { \
+ if (dbg_level & DBG_NO_FUNC_PRINT) \
+ printk (string, ##args); \
+ else \
+ { \
+ printk ("%s:" string, __FUNCTION__, ##args); \
+ printk("\n"); \
+ } \
+ } \
+ } \
+} while (0)
+
+#define BCM_DEBUG_PRINT_BUFFER(Adapter, Type, SubType, dbg_level, buffer, bufferlen) do { \
+ if ((DBG_TYPE_PRINTK == Type) && (PRINTKS_ON)) { \
+ bcm_print_buffer( dbg_level, __FUNCTION__, __FILE__, __LINE__, buffer, bufferlen, BCM_BASE_TYPE_HEX); \
+ } else if (!Adapter) \
+ ; \
+ else { \
+ if (((dbg_level & DBG_LVL_BITMASK) <= Adapter->stDebugState.debug_level) && \
+ ((Type & Adapter->stDebugState.type) && (SubType & Adapter->stDebugState.subtype[Type]))) { \
+ if (dbg_level & DBG_NO_FUNC_PRINT) \
+ bcm_print_buffer( dbg_level, NULL, NULL, __LINE__, buffer, bufferlen, BCM_BASE_TYPE_HEX); \
+ else \
+ bcm_print_buffer( dbg_level, __FUNCTION__, __FILE__, __LINE__, buffer, bufferlen, BCM_BASE_TYPE_HEX); \
+ } \
+ } \
+ } while (0)
+
+
+#define BCM_SHOW_DEBUG_BITMAP(Adapter) do { \
+ int i; \
+ for (i=0; i<(NUMTYPES*2)+1; i++) { \
+ if ((i == 1) || (i == 2) || (i == 4) || (i == 8)) { \
+ /* CAUTION! Forcefully turn on ALL debug paths and subpaths! \
+ Adapter->stDebugState.subtype[i] = 0xffffffff; */ \
+ BCM_DEBUG_PRINT (Adapter, DBG_TYPE_PRINTK, 0, 0, "subtype[%d] = 0x%08x\n", \
+ i, Adapter->stDebugState.subtype[i]); \
+ } \
+ } \
+} while (0)
+
+#endif
+