diff --git a/drivers/iio/adc/mcp3422.c b/drivers/iio/adc/mcp3422.c
index ebad83e..d7b36ef 100644
--- a/drivers/iio/adc/mcp3422.c
+++ b/drivers/iio/adc/mcp3422.c
@@ -339,7 +339,7 @@
 	u8 config;
 
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
-		return -ENODEV;
+		return -EOPNOTSUPP;
 
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*adc));
 	if (!indio_dev)
diff --git a/drivers/iio/adc/ti-adc081c.c b/drivers/iio/adc/ti-adc081c.c
index 2c8374f..ecbc121 100644
--- a/drivers/iio/adc/ti-adc081c.c
+++ b/drivers/iio/adc/ti-adc081c.c
@@ -73,7 +73,7 @@
 	int err;
 
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
-		return -ENODEV;
+		return -EOPNOTSUPP;
 
 	iio = devm_iio_device_alloc(&client->dev, sizeof(*adc));
 	if (!iio)
diff --git a/drivers/iio/chemical/vz89x.c b/drivers/iio/chemical/vz89x.c
index b8b8049..652649d 100644
--- a/drivers/iio/chemical/vz89x.c
+++ b/drivers/iio/chemical/vz89x.c
@@ -249,7 +249,7 @@
 				I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BYTE))
 		data->xfer = vz89x_smbus_xfer;
 	else
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	i2c_set_clientdata(client, indio_dev);
 	data->client = client;
diff --git a/drivers/iio/humidity/hdc100x.c b/drivers/iio/humidity/hdc100x.c
index a7f61e88..fa47676 100644
--- a/drivers/iio/humidity/hdc100x.c
+++ b/drivers/iio/humidity/hdc100x.c
@@ -274,7 +274,7 @@
 
 	if (!i2c_check_functionality(client->adapter,
 				I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BYTE))
-		return -ENODEV;
+		return -EOPNOTSUPP;
 
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
 	if (!indio_dev)
diff --git a/drivers/iio/humidity/htu21.c b/drivers/iio/humidity/htu21.c
index d1636a7..11cbc38 100644
--- a/drivers/iio/humidity/htu21.c
+++ b/drivers/iio/humidity/htu21.c
@@ -192,7 +192,7 @@
 				     I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
 		dev_err(&client->dev,
 			"Adapter does not support some i2c transaction\n");
-		return -ENODEV;
+		return -EOPNOTSUPP;
 	}
 
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*dev_data));
diff --git a/drivers/iio/humidity/si7005.c b/drivers/iio/humidity/si7005.c
index 98a022f..6297766 100644
--- a/drivers/iio/humidity/si7005.c
+++ b/drivers/iio/humidity/si7005.c
@@ -135,7 +135,7 @@
 	int ret;
 
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
-		return -ENODEV;
+		return -EOPNOTSUPP;
 
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
 	if (!indio_dev)
diff --git a/drivers/iio/humidity/si7020.c b/drivers/iio/humidity/si7020.c
index 5ab4e06..ffc2ccf 100644
--- a/drivers/iio/humidity/si7020.c
+++ b/drivers/iio/humidity/si7020.c
@@ -121,7 +121,7 @@
 	if (!i2c_check_functionality(client->adapter,
 				     I2C_FUNC_SMBUS_WRITE_BYTE |
 				     I2C_FUNC_SMBUS_READ_WORD_DATA))
-		return -ENODEV;
+		return -EOPNOTSUPP;
 
 	/* Reset device, loads default settings. */
 	ret = i2c_smbus_write_byte(client, SI7020CMD_RESET);
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
index e6247c3..f581256 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
@@ -121,7 +121,7 @@
 
 	if (!i2c_check_functionality(client->adapter,
 				     I2C_FUNC_SMBUS_I2C_BLOCK))
-		return -ENOSYS;
+		return -EOPNOTSUPP;
 
 	regmap = devm_regmap_init_i2c(client, &inv_mpu_regmap_config);
 	if (IS_ERR(regmap)) {
diff --git a/drivers/iio/light/bh1750.c b/drivers/iio/light/bh1750.c
index 8b41643..b059466 100644
--- a/drivers/iio/light/bh1750.c
+++ b/drivers/iio/light/bh1750.c
@@ -241,7 +241,7 @@
 
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C |
 				I2C_FUNC_SMBUS_WRITE_BYTE))
-		return -ENODEV;
+		return -EOPNOTSUPP;
 
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
 	if (!indio_dev)
diff --git a/drivers/iio/light/jsa1212.c b/drivers/iio/light/jsa1212.c
index c4e8c6b..99a6281 100644
--- a/drivers/iio/light/jsa1212.c
+++ b/drivers/iio/light/jsa1212.c
@@ -326,7 +326,7 @@
 	int ret;
 
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return -ENODEV;
+		return -EOPNOTSUPP;
 
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
 	if (!indio_dev)
diff --git a/drivers/iio/potentiometer/mcp4531.c b/drivers/iio/potentiometer/mcp4531.c
index a3f6687..0db67fe 100644
--- a/drivers/iio/potentiometer/mcp4531.c
+++ b/drivers/iio/potentiometer/mcp4531.c
@@ -159,7 +159,7 @@
 	if (!i2c_check_functionality(client->adapter,
 				     I2C_FUNC_SMBUS_WORD_DATA)) {
 		dev_err(dev, "SMBUS Word Data not supported\n");
-		return -EIO;
+		return -EOPNOTSUPP;
 	}
 
 	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
diff --git a/drivers/iio/pressure/mpl115_i2c.c b/drivers/iio/pressure/mpl115_i2c.c
index 9ea055c..1a29be4 100644
--- a/drivers/iio/pressure/mpl115_i2c.c
+++ b/drivers/iio/pressure/mpl115_i2c.c
@@ -42,7 +42,7 @@
 			 const struct i2c_device_id *id)
 {
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
-		return -ENODEV;
+		return -EOPNOTSUPP;
 
 	return mpl115_probe(&client->dev, id->name, &mpl115_i2c_ops);
 }
diff --git a/drivers/iio/pressure/ms5611_i2c.c b/drivers/iio/pressure/ms5611_i2c.c
index ae67539..7f6fc8e 100644
--- a/drivers/iio/pressure/ms5611_i2c.c
+++ b/drivers/iio/pressure/ms5611_i2c.c
@@ -92,7 +92,7 @@
 				     I2C_FUNC_SMBUS_WRITE_BYTE |
 				     I2C_FUNC_SMBUS_READ_WORD_DATA |
 				     I2C_FUNC_SMBUS_READ_I2C_BLOCK))
-		return -ENODEV;
+		return -EOPNOTSUPP;
 
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st));
 	if (!indio_dev)
diff --git a/drivers/iio/pressure/ms5637.c b/drivers/iio/pressure/ms5637.c
index e8d0e0d..e68052c 100644
--- a/drivers/iio/pressure/ms5637.c
+++ b/drivers/iio/pressure/ms5637.c
@@ -136,7 +136,7 @@
 				     I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
 		dev_err(&client->dev,
 			"Adapter does not support some i2c transaction\n");
-		return -ENODEV;
+		return -EOPNOTSUPP;
 	}
 
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*dev_data));
diff --git a/drivers/iio/pressure/t5403.c b/drivers/iio/pressure/t5403.c
index e11cd39..2667e71 100644
--- a/drivers/iio/pressure/t5403.c
+++ b/drivers/iio/pressure/t5403.c
@@ -221,7 +221,7 @@
 
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA |
 	    I2C_FUNC_SMBUS_I2C_BLOCK))
-		return -ENODEV;
+		return -EOPNOTSUPP;
 
 	ret = i2c_smbus_read_byte_data(client, T5403_SLAVE_ADDR);
 	if (ret < 0)
diff --git a/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c b/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c
index db35e04..4f502386 100644
--- a/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c
+++ b/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c
@@ -278,7 +278,7 @@
 				I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BYTE))
 		data->xfer = lidar_smbus_xfer;
 	else
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	indio_dev->info = &lidar_info;
 	indio_dev->name = LIDAR_DRV_NAME;
diff --git a/drivers/iio/temperature/mlx90614.c b/drivers/iio/temperature/mlx90614.c
index a570c2e..4b645fc 100644
--- a/drivers/iio/temperature/mlx90614.c
+++ b/drivers/iio/temperature/mlx90614.c
@@ -516,7 +516,7 @@
 	int ret;
 
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
-		return -ENODEV;
+		return -EOPNOTSUPP;
 
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
 	if (!indio_dev)
diff --git a/drivers/iio/temperature/tmp006.c b/drivers/iio/temperature/tmp006.c
index e78c106..18c9b43 100644
--- a/drivers/iio/temperature/tmp006.c
+++ b/drivers/iio/temperature/tmp006.c
@@ -205,7 +205,7 @@
 	int ret;
 
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
-		return -ENODEV;
+		return -EOPNOTSUPP;
 
 	if (!tmp006_check_identification(client)) {
 		dev_err(&client->dev, "no TMP006 sensor\n");
diff --git a/drivers/iio/temperature/tsys01.c b/drivers/iio/temperature/tsys01.c
index 05c1206..3e60c61 100644
--- a/drivers/iio/temperature/tsys01.c
+++ b/drivers/iio/temperature/tsys01.c
@@ -190,7 +190,7 @@
 				     I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
 		dev_err(&client->dev,
 			"Adapter does not support some i2c transaction\n");
-		return -ENODEV;
+		return -EOPNOTSUPP;
 	}
 
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*dev_data));
diff --git a/drivers/iio/temperature/tsys02d.c b/drivers/iio/temperature/tsys02d.c
index 4c1fbd5..ab6fe8f 100644
--- a/drivers/iio/temperature/tsys02d.c
+++ b/drivers/iio/temperature/tsys02d.c
@@ -137,7 +137,7 @@
 				     I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
 		dev_err(&client->dev,
 			"Adapter does not support some i2c transaction\n");
-		return -ENODEV;
+		return -EOPNOTSUPP;
 	}
 
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*dev_data));