blob: b068f98920a8385446f03ee3e6fe32d369aedc3c [file] [log] [blame]
/*
* Broadcom specific AMBA
* ChipCommon core driver
*
* Copyright 2005, Broadcom Corporation
* Copyright 2006, 2007, Michael Buesch <m@bues.ch>
* Copyright 2012, Hauke Mehrtens <hauke@hauke-m.de>
*
* Licensed under the GNU/GPL. See COPYING for details.
*/
#include "bcma_private.h"
#include <linux/bcm47xx_wdt.h>
#include <linux/export.h>
#include <linux/platform_device.h>
#include <linux/bcma/bcma.h>
static inline u32 bcma_cc_write32_masked(struct bcma_drv_cc *cc, u16 offset,
u32 mask, u32 value)
{
value &= mask;
value |= bcma_cc_read32(cc, offset) & ~mask;
bcma_cc_write32(cc, offset, value);
return value;
}
u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc)
{
if (cc->capabilities & BCMA_CC_CAP_PMU)
return bcma_pmu_get_alp_clock(cc);
return 20000000;
}
EXPORT_SYMBOL_GPL(bcma_chipco_get_alp_clock);
static u32 bcma_chipco_watchdog_get_max_timer(struct bcma_drv_cc *cc)
{
struct bcma_bus *bus = cc->core->bus;
u32 nb;
if (cc->capabilities & BCMA_CC_CAP_PMU) {
if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706)
nb = 32;
else if (cc->core->id.rev < 26)
nb = 16;
else
nb = (cc->core->id.rev >= 37) ? 32 : 24;
} else {
nb = 28;
}
if (nb == 32)
return 0xffffffff;
else
return (1 << nb) - 1;
}
static u32 bcma_chipco_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt,
u32 ticks)
{
struct bcma_drv_cc *cc = bcm47xx_wdt_get_drvdata(wdt);
return bcma_chipco_watchdog_timer_set(cc, ticks);
}
static u32 bcma_chipco_watchdog_timer_set_ms_wdt(struct bcm47xx_wdt *wdt,
u32 ms)
{
struct bcma_drv_cc *cc = bcm47xx_wdt_get_drvdata(wdt);
u32 ticks;
ticks = bcma_chipco_watchdog_timer_set(cc, cc->ticks_per_ms * ms);
return ticks / cc->ticks_per_ms;
}
static int bcma_chipco_watchdog_ticks_per_ms(struct bcma_drv_cc *cc)
{
struct bcma_bus *bus = cc->core->bus;
if (cc->capabilities & BCMA_CC_CAP_PMU) {
if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706)
/* 4706 CC and PMU watchdogs are clocked at 1/4 of ALP clock */
return bcma_chipco_get_alp_clock(cc) / 4000;
else
/* based on 32KHz ILP clock */
return 32;
} else {
return bcma_chipco_get_alp_clock(cc) / 1000;
}
}
int bcma_chipco_watchdog_register(struct bcma_drv_cc *cc)
{
struct bcm47xx_wdt wdt = {};
struct platform_device *pdev;
wdt.driver_data = cc;
wdt.timer_set = bcma_chipco_watchdog_timer_set_wdt;
wdt.timer_set_ms = bcma_chipco_watchdog_timer_set_ms_wdt;
wdt.max_timer_ms = bcma_chipco_watchdog_get_max_timer(cc) / cc->ticks_per_ms;
pdev = platform_device_register_data(NULL, "bcm47xx-wdt",
cc->core->bus->num, &wdt,
sizeof(wdt));
if (IS_ERR(pdev))
return PTR_ERR(pdev);
cc->watchdog = pdev;
return 0;
}
void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc)
{
if (cc->early_setup_done)
return;
spin_lock_init(&cc->gpio_lock);
if (cc->core->id.rev >= 11)
cc->status = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
cc->capabilities = bcma_cc_read32(cc, BCMA_CC_CAP);
if (cc->core->id.rev >= 35)
cc->capabilities_ext = bcma_cc_read32(cc, BCMA_CC_CAP_EXT);
if (cc->capabilities & BCMA_CC_CAP_PMU)
bcma_pmu_early_init(cc);
cc->early_setup_done = true;
}
void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
{
u32 leddc_on = 10;
u32 leddc_off = 90;
if (cc->setup_done)
return;
bcma_core_chipcommon_early_init(cc);
if (cc->core->id.rev >= 20) {
u32 pullup = 0, pulldown = 0;
if (cc->core->bus->chipinfo.id == BCMA_CHIP_ID_BCM43142) {
pullup = 0x402e0;
pulldown = 0x20500;
}
bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, pullup);
bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, pulldown);
}
if (cc->capabilities & BCMA_CC_CAP_PMU)
bcma_pmu_init(cc);
if (cc->capabilities & BCMA_CC_CAP_PCTL)
bcma_err(cc->core->bus, "Power control not implemented!\n");
if (cc->core->id.rev >= 16) {
if (cc->core->bus->sprom.leddc_on_time &&
cc->core->bus->sprom.leddc_off_time) {
leddc_on = cc->core->bus->sprom.leddc_on_time;
leddc_off = cc->core->bus->sprom.leddc_off_time;
}
bcma_cc_write32(cc, BCMA_CC_GPIOTIMER,
((leddc_on << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) |
(leddc_off << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT)));
}
cc->ticks_per_ms = bcma_chipco_watchdog_ticks_per_ms(cc);
cc->setup_done = true;
}
/* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */
u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks)
{
u32 maxt;
enum bcma_clkmode clkmode;
maxt = bcma_chipco_watchdog_get_max_timer(cc);
if (cc->capabilities & BCMA_CC_CAP_PMU) {
if (ticks == 1)
ticks = 2;
else if (ticks > maxt)
ticks = maxt;
bcma_cc_write32(cc, BCMA_CC_PMU_WATCHDOG, ticks);
} else {
clkmode = ticks ? BCMA_CLKMODE_FAST : BCMA_CLKMODE_DYNAMIC;
bcma_core_set_clockmode(cc->core, clkmode);
if (ticks > maxt)
ticks = maxt;
/* instant NMI */
bcma_cc_write32(cc, BCMA_CC_WATCHDOG, ticks);
}
return ticks;
}
void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value)
{
bcma_cc_write32_masked(cc, BCMA_CC_IRQMASK, mask, value);
}
u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask)
{
return bcma_cc_read32(cc, BCMA_CC_IRQSTAT) & mask;
}
u32 bcma_chipco_gpio_in(struct bcma_drv_cc *cc, u32 mask)
{
return bcma_cc_read32(cc, BCMA_CC_GPIOIN) & mask;
}
u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value)
{
unsigned long flags;
u32 res;
spin_lock_irqsave(&cc->gpio_lock, flags);
res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUT, mask, value);
spin_unlock_irqrestore(&cc->gpio_lock, flags);
return res;
}
EXPORT_SYMBOL_GPL(bcma_chipco_gpio_out);
u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value)
{
unsigned long flags;
u32 res;
spin_lock_irqsave(&cc->gpio_lock, flags);
res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUTEN, mask, value);
spin_unlock_irqrestore(&cc->gpio_lock, flags);
return res;
}
EXPORT_SYMBOL_GPL(bcma_chipco_gpio_outen);
/*
* If the bit is set to 0, chipcommon controlls this GPIO,
* if the bit is set to 1, it is used by some part of the chip and not our code.
*/
u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value)
{
unsigned long flags;
u32 res;
spin_lock_irqsave(&cc->gpio_lock, flags);
res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOCTL, mask, value);
spin_unlock_irqrestore(&cc->gpio_lock, flags);
return res;
}
EXPORT_SYMBOL_GPL(bcma_chipco_gpio_control);
u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value)
{
unsigned long flags;
u32 res;
spin_lock_irqsave(&cc->gpio_lock, flags);
res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOIRQ, mask, value);
spin_unlock_irqrestore(&cc->gpio_lock, flags);
return res;
}
u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value)
{
unsigned long flags;
u32 res;
spin_lock_irqsave(&cc->gpio_lock, flags);
res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value);
spin_unlock_irqrestore(&cc->gpio_lock, flags);
return res;
}
u32 bcma_chipco_gpio_pullup(struct bcma_drv_cc *cc, u32 mask, u32 value)
{
unsigned long flags;
u32 res;
if (cc->core->id.rev < 20)
return 0;
spin_lock_irqsave(&cc->gpio_lock, flags);
res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOPULLUP, mask, value);
spin_unlock_irqrestore(&cc->gpio_lock, flags);
return res;
}
u32 bcma_chipco_gpio_pulldown(struct bcma_drv_cc *cc, u32 mask, u32 value)
{
unsigned long flags;
u32 res;
if (cc->core->id.rev < 20)
return 0;
spin_lock_irqsave(&cc->gpio_lock, flags);
res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOPULLDOWN, mask, value);
spin_unlock_irqrestore(&cc->gpio_lock, flags);
return res;
}
#ifdef CONFIG_BCMA_DRIVER_MIPS
void bcma_chipco_serial_init(struct bcma_drv_cc *cc)
{
unsigned int irq;
u32 baud_base;
u32 i;
unsigned int ccrev = cc->core->id.rev;
struct bcma_serial_port *ports = cc->serial_ports;
if (ccrev >= 11 && ccrev != 15) {
baud_base = bcma_chipco_get_alp_clock(cc);
if (ccrev >= 21) {
/* Turn off UART clock before switching clocksource. */
bcma_cc_write32(cc, BCMA_CC_CORECTL,
bcma_cc_read32(cc, BCMA_CC_CORECTL)
& ~BCMA_CC_CORECTL_UARTCLKEN);
}
/* Set the override bit so we don't divide it */
bcma_cc_write32(cc, BCMA_CC_CORECTL,
bcma_cc_read32(cc, BCMA_CC_CORECTL)
| BCMA_CC_CORECTL_UARTCLK0);
if (ccrev >= 21) {
/* Re-enable the UART clock. */
bcma_cc_write32(cc, BCMA_CC_CORECTL,
bcma_cc_read32(cc, BCMA_CC_CORECTL)
| BCMA_CC_CORECTL_UARTCLKEN);
}
} else {
bcma_err(cc->core->bus, "serial not supported on this device ccrev: 0x%x\n", ccrev);
return;
}
irq = bcma_core_irq(cc->core);
/* Determine the registers of the UARTs */
cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART);
for (i = 0; i < cc->nr_serial_ports; i++) {
ports[i].regs = cc->core->io_addr + BCMA_CC_UART0_DATA +
(i * 256);
ports[i].irq = irq;
ports[i].baud_base = baud_base;
ports[i].reg_shift = 0;
}
}
#endif /* CONFIG_BCMA_DRIVER_MIPS */