| /* |
| * Copyright (C) 2015 Freescale Semiconductor, Inc. |
| * |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPL or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| * |
| * a) This file is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or (at your option) any later version. |
| * |
| * This file is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * Or, alternatively, |
| * |
| * b) Permission is hereby granted, free of charge, to any person |
| * obtaining a copy of this software and associated documentation |
| * files (the "Software"), to deal in the Software without |
| * restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following |
| * conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| /dts-v1/; |
| |
| #include <dt-bindings/input/input.h> |
| #include "imx7d.dtsi" |
| |
| / { |
| model = "Freescale i.MX7 SabreSD Board"; |
| compatible = "fsl,imx7d-sdb", "fsl,imx7d"; |
| |
| memory { |
| reg = <0x80000000 0x80000000>; |
| }; |
| |
| regulators { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| reg_usb_otg1_vbus: regulator@0 { |
| compatible = "regulator-fixed"; |
| reg = <0>; |
| regulator-name = "usb_otg1_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_usb_otg2_vbus: regulator@1 { |
| compatible = "regulator-fixed"; |
| reg = <1>; |
| regulator-name = "usb_otg2_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_can2_3v3: regulator@2 { |
| compatible = "regulator-fixed"; |
| reg = <2>; |
| regulator-name = "can2-3v3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&gpio1 7 GPIO_ACTIVE_LOW>; |
| }; |
| |
| reg_vref_1v8: regulator@3 { |
| compatible = "regulator-fixed"; |
| reg = <3>; |
| regulator-name = "vref-1v8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| }; |
| }; |
| |
| &adc1 { |
| vref-supply = <®_vref_1v8>; |
| status = "okay"; |
| }; |
| |
| &adc2 { |
| vref-supply = <®_vref_1v8>; |
| status = "okay"; |
| }; |
| |
| &cpu0 { |
| arm-supply = <&sw1a_reg>; |
| }; |
| |
| &fec1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_enet1>; |
| assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>, |
| <&clks IMX7D_ENET1_TIME_ROOT_CLK>; |
| assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; |
| assigned-clock-rates = <0>, <100000000>; |
| phy-mode = "rgmii"; |
| phy-handle = <ðphy0>; |
| fsl,magic-packet; |
| status = "okay"; |
| |
| mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ethphy0: ethernet-phy@0 { |
| reg = <0>; |
| }; |
| |
| ethphy1: ethernet-phy@1 { |
| reg = <1>; |
| }; |
| }; |
| }; |
| |
| &fec2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_enet2>; |
| assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>, |
| <&clks IMX7D_ENET2_TIME_ROOT_CLK>; |
| assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; |
| assigned-clock-rates = <0>, <100000000>; |
| phy-mode = "rgmii"; |
| phy-handle = <ðphy1>; |
| fsl,magic-packet; |
| status = "okay"; |
| }; |
| |
| &i2c1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c1>; |
| status = "okay"; |
| |
| pmic: pfuze3000@08 { |
| compatible = "fsl,pfuze3000"; |
| reg = <0x08>; |
| |
| regulators { |
| sw1a_reg: sw1a { |
| regulator-min-microvolt = <700000>; |
| regulator-max-microvolt = <1475000>; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-ramp-delay = <6250>; |
| }; |
| |
| /* use sw1c_reg to align with pfuze100/pfuze200 */ |
| sw1c_reg: sw1b { |
| regulator-min-microvolt = <700000>; |
| regulator-max-microvolt = <1475000>; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-ramp-delay = <6250>; |
| }; |
| |
| sw2_reg: sw2 { |
| regulator-min-microvolt = <1500000>; |
| regulator-max-microvolt = <1850000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| sw3a_reg: sw3 { |
| regulator-min-microvolt = <900000>; |
| regulator-max-microvolt = <1650000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| swbst_reg: swbst { |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5150000>; |
| }; |
| |
| snvs_reg: vsnvs { |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <3000000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vref_reg: vrefddr { |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vgen1_reg: vldo1 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vgen2_reg: vldo2 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1550000>; |
| }; |
| |
| vgen3_reg: vccsd { |
| regulator-min-microvolt = <2850000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vgen4_reg: v33 { |
| regulator-min-microvolt = <2850000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vgen5_reg: vldo3 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vgen6_reg: vldo4 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| }; |
| }; |
| }; |
| |
| &i2c2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c2>; |
| status = "okay"; |
| }; |
| |
| &i2c3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c3>; |
| status = "okay"; |
| }; |
| |
| &i2c4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c4>; |
| status = "okay"; |
| |
| codec: wm8960@1a { |
| compatible = "wlf,wm8960"; |
| reg = <0x1a>; |
| clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>; |
| clock-names = "mclk"; |
| wlf,shared-lrclk; |
| }; |
| }; |
| |
| &uart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1>; |
| assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>; |
| assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; |
| status = "okay"; |
| }; |
| |
| &usbotg1 { |
| vbus-supply = <®_usb_otg1_vbus>; |
| status = "okay"; |
| }; |
| |
| &usbotg2 { |
| vbus-supply = <®_usb_otg2_vbus>; |
| dr_mode = "host"; |
| status = "okay"; |
| }; |
| |
| &usdhc1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc1>; |
| cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; |
| wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; |
| enable-sdio-wakeup; |
| keep-power-in-suspend; |
| status = "okay"; |
| }; |
| |
| &usdhc3 { |
| pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| pinctrl-0 = <&pinctrl_usdhc3>; |
| pinctrl-1 = <&pinctrl_usdhc3_100mhz>; |
| pinctrl-2 = <&pinctrl_usdhc3_200mhz>; |
| assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>; |
| assigned-clock-rates = <400000000>; |
| bus-width = <8>; |
| fsl,tuning-step = <2>; |
| non-removable; |
| status = "okay"; |
| }; |
| |
| &iomuxc { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_hog>; |
| |
| imx7d-sdb { |
| pinctrl_enet1: enet1grp { |
| fsl,pins = < |
| MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x3 |
| MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x3 |
| MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1 |
| MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1 |
| MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1 |
| MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1 |
| MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1 |
| MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1 |
| MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1 |
| MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1 |
| MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1 |
| MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1 |
| MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1 |
| MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1 |
| >; |
| }; |
| |
| pinctrl_enet2: enet2grp { |
| fsl,pins = < |
| MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x1 |
| MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x1 |
| MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x1 |
| MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x1 |
| MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x1 |
| MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x1 |
| MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x1 |
| MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x1 |
| MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x1 |
| MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x1 |
| MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x1 |
| MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x1 |
| >; |
| }; |
| |
| pinctrl_hog: hoggrp { |
| fsl,pins = < |
| MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14 |
| MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x34 /* bt reg on */ |
| >; |
| }; |
| |
| pinctrl_i2c1: i2c1grp { |
| fsl,pins = < |
| MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f |
| MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f |
| >; |
| }; |
| |
| pinctrl_i2c2: i2c2grp { |
| fsl,pins = < |
| MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f |
| MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f |
| >; |
| }; |
| |
| pinctrl_i2c3: i2c3grp { |
| fsl,pins = < |
| MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f |
| MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f |
| >; |
| }; |
| |
| pinctrl_i2c4: i2c4grp { |
| fsl,pins = < |
| MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA 0x4000007f |
| MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL 0x4000007f |
| >; |
| }; |
| |
| pinctrl_uart1: uart1grp { |
| fsl,pins = < |
| MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 |
| MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79 |
| >; |
| }; |
| |
| pinctrl_uart5: uart5grp { |
| fsl,pins = < |
| MX7D_PAD_SAI1_TX_BCLK__UART5_DCE_TX 0x79 |
| MX7D_PAD_SAI1_RX_DATA__UART5_DCE_RX 0x79 |
| MX7D_PAD_SAI1_TX_SYNC__UART5_DCE_CTS 0x79 |
| MX7D_PAD_SAI1_TX_DATA__UART5_DCE_RTS 0x79 |
| >; |
| }; |
| |
| pinctrl_uart6: uart6grp { |
| fsl,pins = < |
| MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX 0x79 |
| MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX 0x79 |
| MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS 0x79 |
| MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS 0x79 |
| >; |
| }; |
| |
| pinctrl_usdhc1: usdhc1grp { |
| fsl,pins = < |
| MX7D_PAD_SD1_CMD__SD1_CMD 0x59 |
| MX7D_PAD_SD1_CLK__SD1_CLK 0x19 |
| MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 |
| MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 |
| MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 |
| MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 |
| MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x59 /* CD */ |
| MX7D_PAD_SD1_WP__GPIO5_IO1 0x59 /* WP */ |
| MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0x59 /* vmmc */ |
| >; |
| }; |
| |
| pinctrl_usdhc2: usdhc2grp { |
| fsl,pins = < |
| MX7D_PAD_SD2_CMD__SD2_CMD 0x59 |
| MX7D_PAD_SD2_CLK__SD2_CLK 0x19 |
| MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59 |
| MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59 |
| MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59 |
| MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59 |
| MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x59 /* WL_REG_ON */ |
| >; |
| }; |
| |
| pinctrl_usdhc2_100mhz: usdhc2grp_100mhz { |
| fsl,pins = < |
| MX7D_PAD_SD2_CMD__SD2_CMD 0x5a |
| MX7D_PAD_SD2_CLK__SD2_CLK 0x1a |
| MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5a |
| MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5a |
| MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5a |
| MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5a |
| >; |
| }; |
| |
| pinctrl_usdhc2_200mhz: usdhc2grp_200mhz { |
| fsl,pins = < |
| MX7D_PAD_SD2_CMD__SD2_CMD 0x5b |
| MX7D_PAD_SD2_CLK__SD2_CLK 0x1b |
| MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5b |
| MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5b |
| MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5b |
| MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5b |
| >; |
| }; |
| |
| |
| pinctrl_usdhc3: usdhc3grp { |
| fsl,pins = < |
| MX7D_PAD_SD3_CMD__SD3_CMD 0x59 |
| MX7D_PAD_SD3_CLK__SD3_CLK 0x19 |
| MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59 |
| MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59 |
| MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59 |
| MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59 |
| MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59 |
| MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59 |
| MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59 |
| MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59 |
| MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19 |
| >; |
| }; |
| |
| pinctrl_usdhc3_100mhz: usdhc3grp_100mhz { |
| fsl,pins = < |
| MX7D_PAD_SD3_CMD__SD3_CMD 0x5a |
| MX7D_PAD_SD3_CLK__SD3_CLK 0x1a |
| MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a |
| MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a |
| MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a |
| MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a |
| MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a |
| MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a |
| MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a |
| MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a |
| MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1a |
| >; |
| }; |
| |
| pinctrl_usdhc3_200mhz: usdhc3grp_200mhz { |
| fsl,pins = < |
| MX7D_PAD_SD3_CMD__SD3_CMD 0x5b |
| MX7D_PAD_SD3_CLK__SD3_CLK 0x1b |
| MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b |
| MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b |
| MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b |
| MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b |
| MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b |
| MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b |
| MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b |
| MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b |
| MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1b |
| >; |
| }; |
| |
| }; |
| }; |