ARM: OMAP1: Replace PM debug create_proc_read_entry() with debugfs
There's no need to keep this entry in proc, it is PM
related debug only entry. Let's move it into debugfs.
Based on an earlier patch David Howells <dhowells@redhat.com>
to use seq_printf and to update to use create_proc_read_entry().
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 7a7690a..ff72d29 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -37,7 +37,8 @@
#include <linux/suspend.h>
#include <linux/sched.h>
-#include <linux/proc_fs.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
#include <linux/interrupt.h>
#include <linux/sysfs.h>
#include <linux/module.h>
@@ -422,23 +423,12 @@
omap_rev());
}
-#if defined(DEBUG) && defined(CONFIG_PROC_FS)
-static int g_read_completed;
-
+#ifdef CONFIG_DEBUG_FS
/*
* Read system PM registers for debugging
*/
-static int omap_pm_read_proc(
- char *page_buffer,
- char **my_first_byte,
- off_t virtual_start,
- int length,
- int *eof,
- void *data)
+static int omap_pm_debug_show(struct seq_file *m, void *v)
{
- int my_buffer_offset = 0;
- char * const my_base = page_buffer;
-
ARM_SAVE(ARM_CKCTL);
ARM_SAVE(ARM_IDLECT1);
ARM_SAVE(ARM_IDLECT2);
@@ -479,10 +469,7 @@
MPUI1610_SAVE(EMIFS_CONFIG);
}
- if (virtual_start == 0) {
- g_read_completed = 0;
-
- my_buffer_offset += sprintf(my_base + my_buffer_offset,
+ seq_printf(m,
"ARM_CKCTL_REG: 0x%-8x \n"
"ARM_IDLECT1_REG: 0x%-8x \n"
"ARM_IDLECT2_REG: 0x%-8x \n"
@@ -512,8 +499,8 @@
ULPD_SHOW(ULPD_STATUS_REQ),
ULPD_SHOW(ULPD_POWER_CTRL));
- if (cpu_is_omap7xx()) {
- my_buffer_offset += sprintf(my_base + my_buffer_offset,
+ if (cpu_is_omap7xx()) {
+ seq_printf(m,
"MPUI7XX_CTRL_REG 0x%-8x \n"
"MPUI7XX_DSP_STATUS_REG: 0x%-8x \n"
"MPUI7XX_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
@@ -526,8 +513,8 @@
MPUI7XX_SHOW(MPUI_DSP_API_CONFIG),
MPUI7XX_SHOW(EMIFF_SDRAM_CONFIG),
MPUI7XX_SHOW(EMIFS_CONFIG));
- } else if (cpu_is_omap15xx()) {
- my_buffer_offset += sprintf(my_base + my_buffer_offset,
+ } else if (cpu_is_omap15xx()) {
+ seq_printf(m,
"MPUI1510_CTRL_REG 0x%-8x \n"
"MPUI1510_DSP_STATUS_REG: 0x%-8x \n"
"MPUI1510_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
@@ -540,8 +527,8 @@
MPUI1510_SHOW(MPUI_DSP_API_CONFIG),
MPUI1510_SHOW(EMIFF_SDRAM_CONFIG),
MPUI1510_SHOW(EMIFS_CONFIG));
- } else if (cpu_is_omap16xx()) {
- my_buffer_offset += sprintf(my_base + my_buffer_offset,
+ } else if (cpu_is_omap16xx()) {
+ seq_printf(m,
"MPUI1610_CTRL_REG 0x%-8x \n"
"MPUI1610_DSP_STATUS_REG: 0x%-8x \n"
"MPUI1610_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
@@ -554,28 +541,37 @@
MPUI1610_SHOW(MPUI_DSP_API_CONFIG),
MPUI1610_SHOW(EMIFF_SDRAM_CONFIG),
MPUI1610_SHOW(EMIFS_CONFIG));
- }
-
- g_read_completed++;
- } else if (g_read_completed >= 1) {
- *eof = 1;
- return 0;
}
- g_read_completed++;
- *my_first_byte = page_buffer;
- return my_buffer_offset;
+ return 0;
}
-static void omap_pm_init_proc(void)
+static int omap_pm_debug_open(struct inode *inode, struct file *file)
{
- /* XXX Appears to leak memory */
- create_proc_read_entry("driver/omap_pm",
- S_IWUSR | S_IRUGO, NULL,
- omap_pm_read_proc, NULL);
+ return single_open(file, omap_pm_debug_show,
+ &inode->i_private);
}
-#endif /* DEBUG && CONFIG_PROC_FS */
+static const struct file_operations omap_pm_debug_fops = {
+ .open = omap_pm_debug_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+};
+
+static void omap_pm_init_debugfs(void)
+{
+ struct dentry *d;
+
+ d = debugfs_create_dir("pm_debug", NULL);
+ if (!d)
+ return;
+
+ (void) debugfs_create_file("omap_pm", S_IWUSR | S_IRUGO,
+ d, NULL, &omap_pm_debug_fops);
+}
+
+#endif /* CONFIG_DEBUG_FS */
/*
* omap_pm_prepare - Do preliminary suspend work.
@@ -701,8 +697,8 @@
suspend_set_ops(&omap_pm_ops);
-#if defined(DEBUG) && defined(CONFIG_PROC_FS)
- omap_pm_init_proc();
+#ifdef CONFIG_DEBUG_FS
+ omap_pm_init_debugfs();
#endif
#ifdef CONFIG_OMAP_32K_TIMER