[PATCH] au1200fb: Alchemy Au1200 framebuffer driver
Add support for Alchemy Au1200 framebuffer driver
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index fdebd60..3a89061 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1202,6 +1202,17 @@
bool "Au1100 LCD Driver"
depends on (FB = y) && EXPERIMENTAL && PCI && MIPS && MIPS_PB1100=y
+config FB_AU1200
+ bool "Au1200 LCD Driver"
+ depends on FB && MIPS && SOC_AU1200
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer driver for the AMD Au1200 SOC. It can drive
+ various panels and CRTs by passing in kernel cmd line option
+ au1200fb:panel=<name>.
+
source "drivers/video/geode/Kconfig"
config FB_FFB
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index aa434e7..cb90218 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -86,6 +86,7 @@
obj-$(CONFIG_FB_PXA) += pxafb.o
obj-$(CONFIG_FB_W100) += w100fb.o
obj-$(CONFIG_FB_AU1100) += au1100fb.o
+obj-$(CONFIG_FB_AU1200) += au1200fb.o
obj-$(CONFIG_FB_PMAG_AA) += pmag-aa-fb.o
obj-$(CONFIG_FB_PMAG_BA) += pmag-ba-fb.o
obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o
diff --git a/drivers/video/au1200fb.c b/drivers/video/au1200fb.c
new file mode 100644
index 0000000..b367de3
--- /dev/null
+++ b/drivers/video/au1200fb.c
@@ -0,0 +1,3844 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ * Au1200 LCD Driver.
+ *
+ * Copyright 2004-2005 AMD
+ * Author: AMD
+ *
+ * Based on:
+ * linux/drivers/video/skeletonfb.c -- Skeleton for a frame buffer device
+ * Created 28 Dec 1997 by Geert Uytterhoeven
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ctype.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/mach-au1x00/au1000.h>
+#include "au1200fb.h"
+
+#ifdef CONFIG_PM
+#include <asm/mach-au1x00/au1xxx_pm.h>
+#endif
+
+#ifndef CONFIG_FB_AU1200_DEVS
+#define CONFIG_FB_AU1200_DEVS 4
+#endif
+
+#define DRIVER_NAME "au1200fb"
+#define DRIVER_DESC "LCD controller driver for AU1200 processors"
+
+#define DEBUG 1
+
+#define print_err(f, arg...) printk(KERN_ERR DRIVER_NAME ": " f "\n", ## arg)
+#define print_warn(f, arg...) printk(KERN_WARNING DRIVER_NAME ": " f "\n", ## arg)
+#define print_info(f, arg...) printk(KERN_INFO DRIVER_NAME ": " f "\n", ## arg)
+
+#if DEBUG
+#define print_dbg(f, arg...) printk(KERN_DEBUG __FILE__ ": " f "\n", ## arg)
+#else
+#define print_dbg(f, arg...) do {} while (0)
+#endif
+
+
+#define AU1200_LCD_FB_IOCTL 0x46FF
+
+#define AU1200_LCD_SET_SCREEN 1
+#define AU1200_LCD_GET_SCREEN 2
+#define AU1200_LCD_SET_WINDOW 3
+#define AU1200_LCD_GET_WINDOW 4
+#define AU1200_LCD_SET_PANEL 5
+#define AU1200_LCD_GET_PANEL 6
+
+#define SCREEN_SIZE (1<< 1)
+#define SCREEN_BACKCOLOR (1<< 2)
+#define SCREEN_BRIGHTNESS (1<< 3)
+#define SCREEN_COLORKEY (1<< 4)
+#define SCREEN_MASK (1<< 5)
+
+struct au1200_lcd_global_regs_t {
+ unsigned int flags;
+ unsigned int xsize;
+ unsigned int ysize;
+ unsigned int backcolor;
+ unsigned int brightness;
+ unsigned int colorkey;
+ unsigned int mask;
+ unsigned int panel_choice;
+ char panel_desc[80];
+
+};
+
+#define WIN_POSITION (1<< 0)
+#define WIN_ALPHA_COLOR (1<< 1)
+#define WIN_ALPHA_MODE (1<< 2)
+#define WIN_PRIORITY (1<< 3)
+#define WIN_CHANNEL (1<< 4)
+#define WIN_BUFFER_FORMAT (1<< 5)
+#define WIN_COLOR_ORDER (1<< 6)
+#define WIN_PIXEL_ORDER (1<< 7)
+#define WIN_SIZE (1<< 8)
+#define WIN_COLORKEY_MODE (1<< 9)
+#define WIN_DOUBLE_BUFFER_MODE (1<< 10)
+#define WIN_RAM_ARRAY_MODE (1<< 11)
+#define WIN_BUFFER_SCALE (1<< 12)
+#define WIN_ENABLE (1<< 13)
+
+struct au1200_lcd_window_regs_t {
+ unsigned int flags;
+ unsigned int xpos;
+ unsigned int ypos;
+ unsigned int alpha_color;
+ unsigned int alpha_mode;
+ unsigned int priority;
+ unsigned int channel;
+ unsigned int buffer_format;
+ unsigned int color_order;
+ unsigned int pixel_order;
+ unsigned int xsize;
+ unsigned int ysize;
+ unsigned int colorkey_mode;
+ unsigned int double_buffer_mode;
+ unsigned int ram_array_mode;
+ unsigned int xscale;
+ unsigned int yscale;
+ unsigned int enable;
+};
+
+
+struct au1200_lcd_iodata_t {
+ unsigned int subcmd;
+ struct au1200_lcd_global_regs_t global;
+ struct au1200_lcd_window_regs_t window;
+};
+
+#if defined(__BIG_ENDIAN)
+#define LCD_CONTROL_DEFAULT_PO LCD_CONTROL_PO_11
+#else
+#define LCD_CONTROL_DEFAULT_PO LCD_CONTROL_PO_00
+#endif
+#define LCD_CONTROL_DEFAULT_SBPPF LCD_CONTROL_SBPPF_565
+
+/* Private, per-framebuffer management information (independent of the panel itself) */
+struct au1200fb_device {
+ struct fb_info fb_info; /* FB driver info record */
+
+ int plane;
+ unsigned char* fb_mem; /* FrameBuffer memory map */
+ unsigned int fb_len;
+ dma_addr_t fb_phys;
+};
+
+static struct au1200fb_device _au1200fb_devices[CONFIG_FB_AU1200_DEVS];
+/********************************************************************/
+
+/* LCD controller restrictions */
+#define AU1200_LCD_MAX_XRES 1280
+#define AU1200_LCD_MAX_YRES 1024
+#define AU1200_LCD_MAX_BPP 32
+#define AU1200_LCD_MAX_CLK 96000000 /* fixme: this needs to go away ? */
+#define AU1200_LCD_NBR_PALETTE_ENTRIES 256
+
+/* Default number of visible screen buffer to allocate */
+#define AU1200FB_NBR_VIDEO_BUFFERS 1
+
+/********************************************************************/
+
+static struct au1200_lcd *lcd = (struct au1200_lcd *) AU1200_LCD_ADDR;
+static int window_index = 2; /* default is zero */
+static int panel_index = 2; /* default is zero */
+static struct window_settings *win;
+static struct panel_settings *panel;
+static int noblanking = 1;
+static int nohwcursor = 0;
+
+struct window_settings {
+ unsigned char name[64];
+ uint32 mode_backcolor;
+ uint32 mode_colorkey;
+ uint32 mode_colorkeymsk;
+ struct {
+ int xres;
+ int yres;
+ int xpos;
+ int ypos;
+ uint32 mode_winctrl1; /* winctrl1[FRM,CCO,PO,PIPE] */
+ uint32 mode_winenable;
+ } w[4];
+};
+
+#if defined(__BIG_ENDIAN)
+#define LCD_WINCTRL1_PO_16BPP LCD_WINCTRL1_PO_00
+#else
+#define LCD_WINCTRL1_PO_16BPP LCD_WINCTRL1_PO_01
+#endif
+
+extern int board_au1200fb_panel_init (void);
+extern int board_au1200fb_panel_shutdown (void);
+
+#ifdef CONFIG_PM
+int au1200fb_pm_callback(au1xxx_power_dev_t *dev,
+ au1xxx_request_t request, void *data);
+au1xxx_power_dev_t *LCD_pm_dev;
+#endif
+
+/*
+ * Default window configurations
+ */
+static struct window_settings windows[] = {
+ { /* Index 0 */
+ "0-FS gfx, 1-video, 2-ovly gfx, 3-ovly gfx",
+ /* mode_backcolor */ 0x006600ff,
+ /* mode_colorkey,msk*/ 0, 0,
+ {
+ {
+ /* xres, yres, xpos, ypos */ 0, 0, 0, 0,
+ /* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565 |
+ LCD_WINCTRL1_PO_16BPP,
+ /* mode_winenable*/ LCD_WINENABLE_WEN0,
+ },
+ {
+ /* xres, yres, xpos, ypos */ 100, 100, 100, 100,
+ /* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565 |
+ LCD_WINCTRL1_PO_16BPP |
+ LCD_WINCTRL1_PIPE,
+ /* mode_winenable*/ LCD_WINENABLE_WEN1,
+ },
+ {
+ /* xres, yres, xpos, ypos */ 0, 0, 0, 0,
+ /* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565 |
+ LCD_WINCTRL1_PO_16BPP,
+ /* mode_winenable*/ 0,
+ },
+ {
+ /* xres, yres, xpos, ypos */ 0, 0, 0, 0,
+ /* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565 |
+ LCD_WINCTRL1_PO_16BPP |
+ LCD_WINCTRL1_PIPE,
+ /* mode_winenable*/ 0,
+ },
+ },
+ },
+
+ { /* Index 1 */
+ "0-FS gfx, 1-video, 2-ovly gfx, 3-ovly gfx",
+ /* mode_backcolor */ 0x006600ff,
+ /* mode_colorkey,msk*/ 0, 0,
+ {
+ {
+ /* xres, yres, xpos, ypos */ 320, 240, 5, 5,
+ /* mode_winctrl1 */ LCD_WINCTRL1_FRM_24BPP |
+ LCD_WINCTRL1_PO_00,
+ /* mode_winenable*/ LCD_WINENABLE_WEN0,
+ },
+ {
+ /* xres, yres, xpos, ypos */ 0, 0, 0, 0,
+ /* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565
+ | LCD_WINCTRL1_PO_16BPP,
+ /* mode_winenable*/ 0,
+ },
+ {
+ /* xres, yres, xpos, ypos */ 100, 100, 0, 0,
+ /* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565 |
+ LCD_WINCTRL1_PO_16BPP |
+ LCD_WINCTRL1_PIPE,
+ /* mode_winenable*/ 0/*LCD_WINENABLE_WEN2*/,
+ },
+ {
+ /* xres, yres, xpos, ypos */ 200, 25, 0, 0,
+ /* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565 |
+ LCD_WINCTRL1_PO_16BPP |
+ LCD_WINCTRL1_PIPE,
+ /* mode_winenable*/ 0,
+ },
+ },
+ },
+ { /* Index 2 */
+ "0-FS gfx, 1-video, 2-ovly gfx, 3-ovly gfx",
+ /* mode_backcolor */ 0x006600ff,
+ /* mode_colorkey,msk*/ 0, 0,
+ {
+ {
+ /* xres, yres, xpos, ypos */ 0, 0, 0, 0,
+ /* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565 |
+ LCD_WINCTRL1_PO_16BPP,
+ /* mode_winenable*/ LCD_WINENABLE_WEN0,
+ },
+ {
+ /* xres, yres, xpos, ypos */ 0, 0, 0, 0,
+ /* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565 |
+ LCD_WINCTRL1_PO_16BPP,
+ /* mode_winenable*/ 0,
+ },
+ {
+ /* xres, yres, xpos, ypos */ 0, 0, 0, 0,
+ /* mode_winctrl1 */ LCD_WINCTRL1_FRM_32BPP |
+ LCD_WINCTRL1_PO_00|LCD_WINCTRL1_PIPE,
+ /* mode_winenable*/ 0/*LCD_WINENABLE_WEN2*/,
+ },
+ {
+ /* xres, yres, xpos, ypos */ 0, 0, 0, 0,
+ /* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565 |
+ LCD_WINCTRL1_PO_16BPP |
+ LCD_WINCTRL1_PIPE,
+ /* mode_winenable*/ 0,
+ },
+ },
+ },
+ /* Need VGA 640 @ 24bpp, @ 32bpp */
+ /* Need VGA 800 @ 24bpp, @ 32bpp */
+ /* Need VGA 1024 @ 24bpp, @ 32bpp */
+};
+
+/*
+ * Controller configurations for various panels.
+ */
+
+struct panel_settings
+{
+ const char name[25]; /* Full name <vendor>_<model> */
+
+ struct fb_monspecs monspecs; /* FB monitor specs */
+
+ /* panel timings */
+ uint32 mode_screen;
+ uint32 mode_horztiming;
+ uint32 mode_verttiming;
+ uint32 mode_clkcontrol;
+ uint32 mode_pwmdiv;
+ uint32 mode_pwmhi;
+ uint32 mode_outmask;
+ uint32 mode_fifoctrl;
+ uint32 mode_toyclksrc;
+ uint32 mode_backlight;
+ uint32 mode_auxpll;
+ int (*device_init)(void);
+ int (*device_shutdown)(void);
+#define Xres min_xres
+#define Yres min_yres
+ u32 min_xres; /* Minimum horizontal resolution */
+ u32 max_xres; /* Maximum horizontal resolution */
+ u32 min_yres; /* Minimum vertical resolution */
+ u32 max_yres; /* Maximum vertical resolution */
+};
+
+/********************************************************************/
+/* fixme: Maybe a modedb for the CRT ? otherwise panels should be as-is */
+
+/* List of panels known to work with the AU1200 LCD controller.
+ * To add a new panel, enter the same specifications as the
+ * Generic_TFT one, and MAKE SURE that it doesn't conflicts
+ * with the controller restrictions. Restrictions are:
+ *
+ * STN color panels: max_bpp <= 12
+ * STN mono panels: max_bpp <= 4
+ * TFT panels: max_bpp <= 16
+ * max_xres <= 800
+ * max_yres <= 600
+ */
+static struct panel_settings known_lcd_panels[] =
+{
+ [0] = { /* QVGA 320x240 H:33.3kHz V:110Hz */
+ .name = "QVGA_320x240",
+ .monspecs = {
+ .modedb = NULL,
+ .modedb_len = 0,
+ .hfmin = 30000,
+ .hfmax = 70000,
+ .vfmin = 60,
+ .vfmax = 60,
+ .dclkmin = 6000000,
+ .dclkmax = 28000000,
+ .input = FB_DISP_RGB,
+ },
+ .mode_screen = LCD_SCREEN_SX_N(320) |
+ LCD_SCREEN_SY_N(240),
+ .mode_horztiming = 0x00c4623b,
+ .mode_verttiming = 0x00502814,
+ .mode_clkcontrol = 0x00020002, /* /4=24Mhz */
+ .mode_pwmdiv = 0x00000000,
+ .mode_pwmhi = 0x00000000,
+ .mode_outmask = 0x00FFFFFF,
+ .mode_fifoctrl = 0x2f2f2f2f,
+ .mode_toyclksrc = 0x00000004, /* AUXPLL directly */
+ .mode_backlight = 0x00000000,
+ .mode_auxpll = 8, /* 96MHz AUXPLL */
+ .device_init = NULL,
+ .device_shutdown = NULL,
+ 320, 320,
+ 240, 240,
+ },
+
+ [1] = { /* VGA 640x480 H:30.3kHz V:58Hz */
+ .name = "VGA_640x480",
+ .monspecs = {
+ .modedb = NULL,
+ .modedb_len = 0,
+ .hfmin = 30000,
+ .hfmax = 70000,
+ .vfmin = 60,
+ .vfmax = 60,
+ .dclkmin = 6000000,
+ .dclkmax = 28000000,
+ .input = FB_DISP_RGB,
+ },
+ .mode_screen = 0x13f9df80,
+ .mode_horztiming = 0x003c5859,
+ .mode_verttiming = 0x00741201,
+ .mode_clkcontrol = 0x00020001, /* /4=24Mhz */
+ .mode_pwmdiv = 0x00000000,
+ .mode_pwmhi = 0x00000000,
+ .mode_outmask = 0x00FFFFFF,
+ .mode_fifoctrl = 0x2f2f2f2f,
+ .mode_toyclksrc = 0x00000004, /* AUXPLL directly */
+ .mode_backlight = 0x00000000,
+ .mode_auxpll = 8, /* 96MHz AUXPLL */
+ .device_init = NULL,
+ .device_shutdown = NULL,
+ 640, 480,
+ 640, 480,
+ },
+
+ [2] = { /* SVGA 800x600 H:46.1kHz V:69Hz */
+ .name = "SVGA_800x600",
+ .monspecs = {
+ .modedb = NULL,
+ .modedb_len = 0,
+ .hfmin = 30000,
+ .hfmax = 70000,
+ .vfmin = 60,
+ .vfmax = 60,
+ .dclkmin = 6000000,
+ .dclkmax = 28000000,
+ .input = FB_DISP_RGB,
+ },
+ .mode_screen = 0x18fa5780,
+ .mode_horztiming = 0x00dc7e77,
+ .mode_verttiming = 0x00584805,
+ .mode_clkcontrol = 0x00020000, /* /2=48Mhz */
+ .mode_pwmdiv = 0x00000000,
+ .mode_pwmhi = 0x00000000,
+ .mode_outmask = 0x00FFFFFF,
+ .mode_fifoctrl = 0x2f2f2f2f,
+ .mode_toyclksrc = 0x00000004, /* AUXPLL directly */
+ .mode_backlight = 0x00000000,
+ .mode_auxpll = 8, /* 96MHz AUXPLL */
+ .device_init = NULL,
+ .device_shutdown = NULL,
+ 800, 800,
+ 600, 600,
+ },
+
+ [3] = { /* XVGA 1024x768 H:56.2kHz V:70Hz */
+ .name = "XVGA_1024x768",
+ .monspecs = {
+ .modedb = NULL,
+ .modedb_len = 0,
+ .hfmin = 30000,
+ .hfmax = 70000,
+ .vfmin = 60,
+ .vfmax = 60,
+ .dclkmin = 6000000,
+ .dclkmax = 28000000,
+ .input = FB_DISP_RGB,
+ },
+ .mode_screen = 0x1ffaff80,
+ .mode_horztiming = 0x007d0e57,
+ .mode_verttiming = 0x00740a01,
+ .mode_clkcontrol = 0x000A0000, /* /1 */
+ .mode_pwmdiv = 0x00000000,
+ .mode_pwmhi = 0x00000000,
+ .mode_outmask = 0x00FFFFFF,
+ .mode_fifoctrl = 0x2f2f2f2f,
+ .mode_toyclksrc = 0x00000004, /* AUXPLL directly */
+ .mode_backlight = 0x00000000,
+ .mode_auxpll = 6, /* 72MHz AUXPLL */
+ .device_init = NULL,
+ .device_shutdown = NULL,
+ 1024, 1024,
+ 768, 768,
+ },
+
+ [4] = { /* XVGA XVGA 1280x1024 H:68.5kHz V:65Hz */
+ .name = "XVGA_1280x1024",
+ .monspecs = {
+ .modedb = NULL,
+ .modedb_len = 0,
+ .hfmin = 30000,
+ .hfmax = 70000,
+ .vfmin = 60,
+ .vfmax = 60,
+ .dclkmin = 6000000,
+ .dclkmax = 28000000,
+ .input = FB_DISP_RGB,
+ },
+ .mode_screen = 0x27fbff80,
+ .mode_horztiming = 0x00cdb2c7,
+ .mode_verttiming = 0x00600002,
+ .mode_clkcontrol = 0x000A0000, /* /1 */
+ .mode_pwmdiv = 0x00000000,
+ .mode_pwmhi = 0x00000000,
+ .mode_outmask = 0x00FFFFFF,
+ .mode_fifoctrl = 0x2f2f2f2f,
+ .mode_toyclksrc = 0x00000004, /* AUXPLL directly */
+ .mode_backlight = 0x00000000,
+ .mode_auxpll = 10, /* 120MHz AUXPLL */
+ .device_init = NULL,
+ .device_shutdown = NULL,
+ 1280, 1280,
+ 1024, 1024,
+ },
+
+ [5] = { /* Samsung 1024x768 TFT */
+ .name = "Samsung_1024x768_TFT",
+ .monspecs = {
+ .modedb = NULL,
+ .modedb_len = 0,
+ .hfmin = 30000,
+ .hfmax = 70000,
+ .vfmin = 60,
+ .vfmax = 60,
+ .dclkmin = 6000000,
+ .dclkmax = 28000000,
+ .input = FB_DISP_RGB,
+ },
+ .mode_screen = 0x1ffaff80,
+ .mode_horztiming = 0x018cc677,
+ .mode_verttiming = 0x00241217,
+ .mode_clkcontrol = 0x00000000, /* SCB 0x1 /4=24Mhz */
+ .mode_pwmdiv = 0x8000063f, /* SCB 0x0 */
+ .mode_pwmhi = 0x03400000, /* SCB 0x0 */
+ .mode_outmask = 0x00FFFFFF,
+ .mode_fifoctrl = 0x2f2f2f2f,
+ .mode_toyclksrc = 0x00000004, /* AUXPLL directly */
+ .mode_backlight = 0x00000000,
+ .mode_auxpll = 8, /* 96MHz AUXPLL */
+ .device_init = board_au1200fb_panel_init,
+ .device_shutdown = board_au1200fb_panel_shutdown,
+ 1024, 1024,
+ 768, 768,
+ },
+
+ [6] = { /* Toshiba 640x480 TFT */
+ .name = "Toshiba_640x480_TFT",
+ .monspecs = {
+ .modedb = NULL,
+ .modedb_len = 0,
+ .hfmin = 30000,
+ .hfmax = 70000,
+ .vfmin = 60,
+ .vfmax = 60,
+ .dclkmin = 6000000,
+ .dclkmax = 28000000,
+ .input = FB_DISP_RGB,
+ },
+ .mode_screen = LCD_SCREEN_SX_N(640) |
+ LCD_SCREEN_SY_N(480),
+ .mode_horztiming = LCD_HORZTIMING_HPW_N(96) |
+ LCD_HORZTIMING_HND1_N(13) | LCD_HORZTIMING_HND2_N(51),
+ .mode_verttiming = LCD_VERTTIMING_VPW_N(2) |
+ LCD_VERTTIMING_VND1_N(11) | LCD_VERTTIMING_VND2_N(32),
+ .mode_clkcontrol = 0x00000000, /* /4=24Mhz */
+ .mode_pwmdiv = 0x8000063f,
+ .mode_pwmhi = 0x03400000,
+ .mode_outmask = 0x00fcfcfc,
+ .mode_fifoctrl = 0x2f2f2f2f,
+ .mode_toyclksrc = 0x00000004, /* AUXPLL directly */
+ .mode_backlight = 0x00000000,
+ .mode_auxpll = 8, /* 96MHz AUXPLL */
+ .device_init = board_au1200fb_panel_init,
+ .device_shutdown = board_au1200fb_panel_shutdown,
+ 640, 480,
+ 640, 480,
+ },
+
+ [7] = { /* Sharp 320x240 TFT */
+ .name = "Sharp_320x240_TFT",
+ .monspecs = {
+ .modedb = NULL,
+ .modedb_len = 0,
+ .hfmin = 12500,
+ .hfmax = 20000,
+ .vfmin = 38,
+ .vfmax = 81,
+ .dclkmin = 4500000,
+ .dclkmax = 6800000,
+ .input = FB_DISP_RGB,
+ },
+ .mode_screen = LCD_SCREEN_SX_N(320) |
+ LCD_SCREEN_SY_N(240),
+ .mode_horztiming = LCD_HORZTIMING_HPW_N(60) |
+ LCD_HORZTIMING_HND1_N(13) | LCD_HORZTIMING_HND2_N(2),
+ .mode_verttiming = LCD_VERTTIMING_VPW_N(2) |
+ LCD_VERTTIMING_VND1_N(2) | LCD_VERTTIMING_VND2_N(5),
+ .mode_clkcontrol = LCD_CLKCONTROL_PCD_N(7), /*16=6Mhz*/
+ .mode_pwmdiv = 0x8000063f,
+ .mode_pwmhi = 0x03400000,
+ .mode_outmask = 0x00fcfcfc,
+ .mode_fifoctrl = 0x2f2f2f2f,
+ .mode_toyclksrc = 0x00000004, /* AUXPLL directly */
+ .mode_backlight = 0x00000000,
+ .mode_auxpll = 8, /* 96MHz AUXPLL */
+ .device_init = board_au1200fb_panel_init,
+ .device_shutdown = board_au1200fb_panel_shutdown,
+ 320, 320,
+ 240, 240,
+ },
+
+ [8] = { /* Toppoly TD070WGCB2 7" 856x480 TFT */
+ .name = "Toppoly_TD070WGCB2",
+ .monspecs = {
+ .modedb = NULL,
+ .modedb_len = 0,
+ .hfmin = 30000,
+ .hfmax = 70000,
+ .vfmin = 60,
+ .vfmax = 60,
+ .dclkmin = 6000000,
+ .dclkmax = 28000000,
+ .input = FB_DISP_RGB,
+ },
+ .mode_screen = LCD_SCREEN_SX_N(856) |
+ LCD_SCREEN_SY_N(480),
+ .mode_horztiming = LCD_HORZTIMING_HND2_N(43) |
+ LCD_HORZTIMING_HND1_N(43) | LCD_HORZTIMING_HPW_N(114),
+ .mode_verttiming = LCD_VERTTIMING_VND2_N(20) |
+ LCD_VERTTIMING_VND1_N(21) | LCD_VERTTIMING_VPW_N(4),
+ .mode_clkcontrol = 0x00020001, /* /4=24Mhz */
+ .mode_pwmdiv = 0x8000063f,
+ .mode_pwmhi = 0x03400000,
+ .mode_outmask = 0x00fcfcfc,
+ .mode_fifoctrl = 0x2f2f2f2f,
+ .mode_toyclksrc = 0x00000004, /* AUXPLL directly */
+ .mode_backlight = 0x00000000,
+ .mode_auxpll = 8, /* 96MHz AUXPLL */
+ .device_init = board_au1200fb_panel_init,
+ .device_shutdown = board_au1200fb_panel_shutdown,
+ 856, 856,
+ 480, 480,
+ },
+};
+
+#define NUM_PANELS (ARRAY_SIZE(known_lcd_panels))
+
+/********************************************************************/
+
+#ifdef CONFIG_PM
+static int set_brightness(unsigned int brightness)
+{
+ unsigned int hi1, divider;
+
+ /* limit brightness pwm duty to >= 30/1600 */
+ if (brightness < 30) {
+ brightness = 30;
+ }
+ divider = (lcd->pwmdiv & 0x3FFFF) + 1;
+ hi1 = (lcd->pwmhi >> 16) + 1;
+ hi1 = (((brightness & 0xFF) + 1) * divider >> 8);
+ lcd->pwmhi &= 0xFFFF;
+ lcd->pwmhi |= (hi1 << 16);
+
+ return brightness;
+}
+#endif /* CONFIG_PM */
+
+static int winbpp (unsigned int winctrl1)
+{
+ int bits = 0;
+
+ /* how many bits are needed for each pixel format */
+ switch (winctrl1 & LCD_WINCTRL1_FRM) {
+ case LCD_WINCTRL1_FRM_1BPP:
+ bits = 1;
+ break;
+ case LCD_WINCTRL1_FRM_2BPP:
+ bits = 2;
+ break;
+ case LCD_WINCTRL1_FRM_4BPP:
+ bits = 4;
+ break;
+ case LCD_WINCTRL1_FRM_8BPP:
+ bits = 8;
+ break;
+ case LCD_WINCTRL1_FRM_12BPP:
+ case LCD_WINCTRL1_FRM_16BPP655:
+ case LCD_WINCTRL1_FRM_16BPP565:
+ case LCD_WINCTRL1_FRM_16BPP556:
+ case LCD_WINCTRL1_FRM_16BPPI1555:
+ case LCD_WINCTRL1_FRM_16BPPI5551:
+ case LCD_WINCTRL1_FRM_16BPPA1555:
+ case LCD_WINCTRL1_FRM_16BPPA5551:
+ bits = 16;
+ break;
+ case LCD_WINCTRL1_FRM_24BPP:
+ case LCD_WINCTRL1_FRM_32BPP:
+ bits = 32;
+ break;
+ }
+
+ return bits;
+}
+
+static int fbinfo2index (struct fb_info *fb_info)
+{
+ int i;
+
+ for (i = 0; i < CONFIG_FB_AU1200_DEVS; ++i) {
+ if (fb_info == (struct fb_info *)(&_au1200fb_devices[i].fb_info))
+ return i;
+ }
+ printk("au1200fb: ERROR: fbinfo2index failed!\n");
+ return -1;
+}
+
+static int au1200_setlocation (struct au1200fb_device *fbdev, int plane,
+ int xpos, int ypos)
+{
+ uint32 winctrl0, winctrl1, winenable, fb_offset = 0;
+ int xsz, ysz;
+
+ /* FIX!!! NOT CHECKING FOR COMPLETE OFFSCREEN YET */
+
+ winctrl0 = lcd->window[plane].winctrl0;
+ winctrl1 = lcd->window[plane].winctrl1;
+ winctrl0 &= (LCD_WINCTRL0_A | LCD_WINCTRL0_AEN);
+ winctrl1 &= ~(LCD_WINCTRL1_SZX | LCD_WINCTRL1_SZY);
+
+ /* Check for off-screen adjustments */
+ xsz = win->w[plane].xres;
+ ysz = win->w[plane].yres;
+ if ((xpos + win->w[plane].xres) > panel->Xres) {
+ /* Off-screen to the right */
+ xsz = panel->Xres - xpos; /* off by 1 ??? */
+ /*printk("off screen right\n");*/
+ }
+
+ if ((ypos + win->w[plane].yres) > panel->Yres) {
+ /* Off-screen to the bottom */
+ ysz = panel->Yres - ypos; /* off by 1 ??? */
+ /*printk("off screen bottom\n");*/
+ }
+
+ if (xpos < 0) {
+ /* Off-screen to the left */
+ xsz = win->w[plane].xres + xpos;
+ fb_offset += (((0 - xpos) * winbpp(lcd->window[plane].winctrl1))/8);
+ xpos = 0;
+ /*printk("off screen left\n");*/
+ }
+
+ if (ypos < 0) {
+ /* Off-screen to the top */
+ ysz = win->w[plane].yres + ypos;
+ /* fixme: fb_offset += ((0-ypos)*fb_pars[plane].line_length); */
+ ypos = 0;
+ /*printk("off screen top\n");*/
+ }
+
+ /* record settings */
+ win->w[plane].xpos = xpos;
+ win->w[plane].ypos = ypos;
+
+ xsz -= 1;
+ ysz -= 1;
+ winctrl0 |= (xpos << 21);
+ winctrl0 |= (ypos << 10);
+ winctrl1 |= (xsz << 11);
+ winctrl1 |= (ysz << 0);
+
+ /* Disable the window while making changes, then restore WINEN */
+ winenable = lcd->winenable & (1 << plane);
+ au_sync();
+ lcd->winenable &= ~(1 << plane);
+ lcd->window[plane].winctrl0 = winctrl0;
+ lcd->window[plane].winctrl1 = winctrl1;
+ lcd->window[plane].winbuf0 =
+ lcd->window[plane].winbuf1 = fbdev->fb_phys;
+ lcd->window[plane].winbufctrl = 0; /* select winbuf0 */
+ lcd->winenable |= winenable;
+ au_sync();
+
+ return 0;
+}
+
+static void au1200_setpanel (struct panel_settings *newpanel)
+{
+ /*
+ * Perform global setup/init of LCD controller
+ */
+ uint32 winenable;
+
+ /* Make sure all windows disabled */
+ winenable = lcd->winenable;
+ lcd->winenable = 0;
+ au_sync();
+ /*
+ * Ensure everything is disabled before reconfiguring
+ */
+ if (lcd->screen & LCD_SCREEN_SEN) {
+ /* Wait for vertical sync period */
+ lcd->intstatus = LCD_INT_SS;
+ while ((lcd->intstatus & LCD_INT_SS) == 0) {
+ au_sync();
+ }
+
+ lcd->screen &= ~LCD_SCREEN_SEN; /*disable the controller*/
+
+ do {
+ lcd->intstatus = lcd->intstatus; /*clear interrupts*/
+ au_sync();
+ /*wait for controller to shut down*/
+ } while ((lcd->intstatus & LCD_INT_SD) == 0);
+
+ /* Call shutdown of current panel (if up) */
+ /* this must occur last, because if an external clock is driving
+ the controller, the clock cannot be turned off before first
+ shutting down the controller.
+ */
+ if (panel->device_shutdown != NULL)
+ panel->device_shutdown();
+ }
+
+ /* Newpanel == NULL indicates a shutdown operation only */
+ if (newpanel == NULL)
+ return;
+
+ panel = newpanel;
+
+ printk("Panel(%s), %dx%d\n", panel->name, panel->Xres, panel->Yres);
+
+ /*
+ * Setup clocking if internal LCD clock source (assumes sys_auxpll valid)
+ */
+ if (!(panel->mode_clkcontrol & LCD_CLKCONTROL_EXT))
+ {
+ uint32 sys_clksrc;
+ au_writel(panel->mode_auxpll, SYS_AUXPLL);
+ sys_clksrc = au_readl(SYS_CLKSRC) & ~0x0000001f;
+ sys_clksrc |= panel->mode_toyclksrc;
+ au_writel(sys_clksrc, SYS_CLKSRC);
+ }
+
+ /*
+ * Configure panel timings
+ */
+ lcd->screen = panel->mode_screen;
+ lcd->horztiming = panel->mode_horztiming;
+ lcd->verttiming = panel->mode_verttiming;
+ lcd->clkcontrol = panel->mode_clkcontrol;
+ lcd->pwmdiv = panel->mode_pwmdiv;
+ lcd->pwmhi = panel->mode_pwmhi;
+ lcd->outmask = panel->mode_outmask;
+ lcd->fifoctrl = panel->mode_fifoctrl;
+ au_sync();
+
+ /* fixme: Check window settings to make sure still valid
+ * for new geometry */
+#if 0
+ au1200_setlocation(fbdev, 0, win->w[0].xpos, win->w[0].ypos);
+ au1200_setlocation(fbdev, 1, win->w[1].xpos, win->w[1].ypos);
+ au1200_setlocation(fbdev, 2, win->w[2].xpos, win->w[2].ypos);
+ au1200_setlocation(fbdev, 3, win->w[3].xpos, win->w[3].ypos);
+#endif
+ lcd->winenable = winenable;
+
+ /*
+ * Re-enable screen now that it is configured
+ */
+ lcd->screen |= LCD_SCREEN_SEN;
+ au_sync();
+
+ /* Call init of panel */
+ if (panel->device_init != NULL) panel->device_init();
+
+ /* FIX!!!! not appropriate on panel change!!! Global setup/init */
+ lcd->intenable = 0;
+ lcd->intstatus = ~0;
+ lcd->backcolor = win->mode_backcolor;
+
+ /* Setup Color Key - FIX!!! */
+ lcd->colorkey = win->mode_colorkey;
+ lcd->colorkeymsk = win->mode_colorkeymsk;
+
+ /* Setup HWCursor - FIX!!! Need to support this eventually */
+ lcd->hwc.cursorctrl = 0;
+ lcd->hwc.cursorpos = 0;
+ lcd->hwc.cursorcolor0 = 0;
+ lcd->hwc.cursorcolor1 = 0;
+ lcd->hwc.cursorcolor2 = 0;
+ lcd->hwc.cursorcolor3 = 0;
+
+
+#if 0
+#define D(X) printk("%25s: %08X\n", #X, X)
+ D(lcd->screen);
+ D(lcd->horztiming);
+ D(lcd->verttiming);
+ D(lcd->clkcontrol);
+ D(lcd->pwmdiv);
+ D(lcd->pwmhi);
+ D(lcd->outmask);
+ D(lcd->fifoctrl);
+ D(lcd->window[0].winctrl0);
+ D(lcd->window[0].winctrl1);
+ D(lcd->window[0].winctrl2);
+ D(lcd->window[0].winbuf0);
+ D(lcd->window[0].winbuf1);
+ D(lcd->window[0].winbufctrl);
+ D(lcd->window[1].winctrl0);
+ D(lcd->window[1].winctrl1);
+ D(lcd->window[1].winctrl2);
+ D(lcd->window[1].winbuf0);
+ D(lcd->window[1].winbuf1);
+ D(lcd->window[1].winbufctrl);
+ D(lcd->window[2].winctrl0);
+ D(lcd->window[2].winctrl1);
+ D(lcd->window[2].winctrl2);
+ D(lcd->window[2].winbuf0);
+ D(lcd->window[2].winbuf1);
+ D(lcd->window[2].winbufctrl);
+ D(lcd->window[3].winctrl0);
+ D(lcd->window[3].winctrl1);
+ D(lcd->window[3].winctrl2);
+ D(lcd->window[3].winbuf0);
+ D(lcd->window[3].winbuf1);
+ D(lcd->window[3].winbufctrl);
+ D(lcd->winenable);
+ D(lcd->intenable);
+ D(lcd->intstatus);
+ D(lcd->backcolor);
+ D(lcd->winenable);
+ D(lcd->colorkey);
+ D(lcd->colorkeymsk);
+ D(lcd->hwc.cursorctrl);
+ D(lcd->hwc.cursorpos);
+ D(lcd->hwc.cursorcolor0);
+ D(lcd->hwc.cursorcolor1);
+ D(lcd->hwc.cursorcolor2);
+ D(lcd->hwc.cursorcolor3);
+#endif
+}
+
+static void au1200_setmode(struct au1200fb_device *fbdev)
+{
+ int plane = fbdev->plane;
+ /* Window/plane setup */
+ lcd->window[plane].winctrl1 = ( 0
+ | LCD_WINCTRL1_PRI_N(plane)
+ | win->w[plane].mode_winctrl1 /* FRM,CCO,PO,PIPE */
+ ) ;
+
+ au1200_setlocation(fbdev, plane, win->w[plane].xpos, win->w[plane].ypos);
+
+ lcd->window[plane].winctrl2 = ( 0
+ | LCD_WINCTRL2_CKMODE_00
+ | LCD_WINCTRL2_DBM
+ | LCD_WINCTRL2_BX_N( fbdev->fb_info.fix.line_length)
+ | LCD_WINCTRL2_SCX_1
+ | LCD_WINCTRL2_SCY_1
+ ) ;
+ lcd->winenable |= win->w[plane].mode_winenable;
+ au_sync();
+}
+
+
+/* Inline helpers */
+
+/*#define panel_is_dual(panel) ((panel->mode_screen & LCD_SCREEN_PT) == LCD_SCREEN_PT_010)*/
+/*#define panel_is_active(panel)((panel->mode_screen & LCD_SCREEN_PT) == LCD_SCREEN_PT_010)*/
+
+#define panel_is_color(panel) ((panel->mode_screen & LCD_SCREEN_PT) <= LCD_SCREEN_PT_CDSTN)
+
+/* Bitfields format supported by the controller. */
+static struct fb_bitfield rgb_bitfields[][4] = {
+ /* Red, Green, Blue, Transp */
+ [LCD_WINCTRL1_FRM_16BPP655 >> 25] =
+ { { 10, 6, 0 }, { 5, 5, 0 }, { 0, 5, 0 }, { 0, 0, 0 } },
+
+ [LCD_WINCTRL1_FRM_16BPP565 >> 25] =
+ { { 11, 5, 0 }, { 5, 6, 0 }, { 0, 5, 0 }, { 0, 0, 0 } },
+
+ [LCD_WINCTRL1_FRM_16BPP556 >> 25] =
+ { { 11, 5, 0 }, { 6, 5, 0 }, { 0, 6, 0 }, { 0, 0, 0 } },
+
+ [LCD_WINCTRL1_FRM_16BPPI1555 >> 25] =
+ { { 10, 5, 0 }, { 5, 5, 0 }, { 0, 5, 0 }, { 0, 0, 0 } },
+
+ [LCD_WINCTRL1_FRM_16BPPI5551 >> 25] =
+ { { 11, 5, 0 }, { 6, 5, 0 }, { 1, 5, 0 }, { 0, 0, 0 } },
+
+ [LCD_WINCTRL1_FRM_16BPPA1555 >> 25] =
+ { { 10, 5, 0 }, { 5, 5, 0 }, { 0, 5, 0 }, { 15, 1, 0 } },
+
+ [LCD_WINCTRL1_FRM_16BPPA5551 >> 25] =
+ { { 11, 5, 0 }, { 6, 5, 0 }, { 1, 5, 0 }, { 0, 1, 0 } },
+
+ [LCD_WINCTRL1_FRM_24BPP >> 25] =
+ { { 16, 8, 0 }, { 8, 8, 0 }, { 0, 8, 0 }, { 0, 0, 0 } },
+
+ [LCD_WINCTRL1_FRM_32BPP >> 25] =
+ { { 16, 8, 0 }, { 8, 8, 0 }, { 0, 8, 0 }, { 24, 0, 0 } },
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* Helpers */
+
+static void au1200fb_update_fbinfo(struct fb_info *fbi)
+{
+ /* FIX!!!! This also needs to take the window pixel format into account!!! */
+
+ /* Update var-dependent FB info */
+ if (panel_is_color(panel)) {
+ if (fbi->var.bits_per_pixel <= 8) {
+ /* palettized */
+ fbi->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+ fbi->fix.line_length = fbi->var.xres_virtual /
+ (8/fbi->var.bits_per_pixel);
+ } else {
+ /* non-palettized */
+ fbi->fix.visual = FB_VISUAL_TRUECOLOR;
+ fbi->fix.line_length = fbi->var.xres_virtual * (fbi->var.bits_per_pixel / 8);
+ }
+ } else {
+ /* mono FIX!!! mono 8 and 4 bits */
+ fbi->fix.visual = FB_VISUAL_MONO10;
+ fbi->fix.line_length = fbi->var.xres_virtual / 8;
+ }
+
+ fbi->screen_size = fbi->fix.line_length * fbi->var.yres_virtual;
+ print_dbg("line length: %d\n", fbi->fix.line_length);
+ print_dbg("bits_per_pixel: %d\n", fbi->var.bits_per_pixel);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* AU1200 framebuffer driver */
+
+/* fb_check_var
+ * Validate var settings with hardware restrictions and modify it if necessary
+ */
+static int au1200fb_fb_check_var(struct fb_var_screeninfo *var,
+ struct fb_info *fbi)
+{
+ struct au1200fb_device *fbdev = (struct au1200fb_device *)fbi;
+ u32 pixclock;
+ int screen_size, plane;
+
+ plane = fbdev->plane;
+
+ /* Make sure that the mode respect all LCD controller and
+ * panel restrictions. */
+ var->xres = win->w[plane].xres;
+ var->yres = win->w[plane].yres;
+
+ /* No need for virtual resolution support */
+ var->xres_virtual = var->xres;
+ var->yres_virtual = var->yres;
+
+ var->bits_per_pixel = winbpp(win->w[plane].mode_winctrl1);
+
+ screen_size = var->xres_virtual * var->yres_virtual;
+ if (var->bits_per_pixel > 8) screen_size *= (var->bits_per_pixel / 8);
+ else screen_size /= (8/var->bits_per_pixel);
+
+ if (fbdev->fb_len < screen_size)
+ return -EINVAL; /* Virtual screen is to big, abort */
+
+ /* FIX!!!! what are the implicaitons of ignoring this for windows ??? */
+ /* The max LCD clock is fixed to 48MHz (value of AUX_CLK). The pixel
+ * clock can only be obtain by dividing this value by an even integer.
+ * Fallback to a slower pixel clock if necessary. */
+ pixclock = max((u32)(PICOS2KHZ(var->pixclock) * 1000), fbi->monspecs.dclkmin);
+ pixclock = min(pixclock, min(fbi->monspecs.dclkmax, (u32)AU1200_LCD_MAX_CLK/2));
+
+ if (AU1200_LCD_MAX_CLK % pixclock) {
+ int diff = AU1200_LCD_MAX_CLK % pixclock;
+ pixclock -= diff;
+ }
+
+ var->pixclock = KHZ2PICOS(pixclock/1000);
+#if 0
+ if (!panel_is_active(panel)) {
+ int pcd = AU1200_LCD_MAX_CLK / (pixclock * 2) - 1;
+
+ if (!panel_is_color(panel)
+ && (panel->control_base & LCD_CONTROL_MPI) && (pcd < 3)) {
+ /* STN 8bit mono panel support is up to 6MHz pixclock */
+ var->pixclock = KHZ2PICOS(6000);
+ } else if (!pcd) {
+ /* Other STN panel support is up to 12MHz */
+ var->pixclock = KHZ2PICOS(12000);
+ }
+ }
+#endif
+ /* Set bitfield accordingly */
+ switch (var->bits_per_pixel) {
+ case 16:
+ {
+ /* 16bpp True color.
+ * These must be set to MATCH WINCTRL[FORM] */
+ int idx;
+ idx = (win->w[0].mode_winctrl1 & LCD_WINCTRL1_FRM) >> 25;
+ var->red = rgb_bitfields[idx][0];
+ var->green = rgb_bitfields[idx][1];
+ var->blue = rgb_bitfields[idx][2];
+ var->transp = rgb_bitfields[idx][3];
+ break;
+ }
+
+ case 32:
+ {
+ /* 32bpp True color.
+ * These must be set to MATCH WINCTRL[FORM] */
+ int idx;
+ idx = (win->w[0].mode_winctrl1 & LCD_WINCTRL1_FRM) >> 25;
+ var->red = rgb_bitfields[idx][0];
+ var->green = rgb_bitfields[idx][1];
+ var->blue = rgb_bitfields[idx][2];
+ var->transp = rgb_bitfields[idx][3];
+ break;
+ }
+ default:
+ print_dbg("Unsupported depth %dbpp", var->bits_per_pixel);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/* fb_set_par
+ * Set hardware with var settings. This will enable the controller with a
+ * specific mode, normally validated with the fb_check_var method
+ */
+static int au1200fb_fb_set_par(struct fb_info *fbi)
+{
+ struct au1200fb_device *fbdev = (struct au1200fb_device *)fbi;
+
+ au1200fb_update_fbinfo(fbi);
+ au1200_setmode(fbdev);
+
+ return 0;
+}
+
+/* fb_setcolreg
+ * Set color in LCD palette.
+ */
+static int au1200fb_fb_setcolreg(unsigned regno, unsigned red, unsigned green,
+ unsigned blue, unsigned transp, struct fb_info *fbi)
+{
+ volatile u32 *palette = lcd->palette;
+ u32 value;
+
+ if (regno > (AU1200_LCD_NBR_PALETTE_ENTRIES - 1))
+ return -EINVAL;
+
+ if (fbi->var.grayscale) {
+ /* Convert color to grayscale */
+ red = green = blue =
+ (19595 * red + 38470 * green + 7471 * blue) >> 16;
+ }
+
+ if (fbi->fix.visual == FB_VISUAL_TRUECOLOR) {
+ /* Place color in the pseudopalette */
+ if (regno > 16)
+ return -EINVAL;
+
+ palette = (u32*) fbi->pseudo_palette;
+
+ red >>= (16 - fbi->var.red.length);
+ green >>= (16 - fbi->var.green.length);
+ blue >>= (16 - fbi->var.blue.length);
+
+ value = (red << fbi->var.red.offset) |
+ (green << fbi->var.green.offset)|
+ (blue << fbi->var.blue.offset);
+ value &= 0xFFFF;
+
+ } else if (1 /*FIX!!! panel_is_active(fbdev->panel)*/) {
+ /* COLOR TFT PALLETTIZED (use RGB 565) */
+ value = (red & 0xF800)|((green >> 5) &
+ 0x07E0)|((blue >> 11) & 0x001F);
+ value &= 0xFFFF;
+
+ } else if (0 /*panel_is_color(fbdev->panel)*/) {
+ /* COLOR STN MODE */
+ value = 0x1234;
+ value &= 0xFFF;
+ } else {
+ /* MONOCHROME MODE */
+ value = (green >> 12) & 0x000F;
+ value &= 0xF;
+ }
+
+ palette[regno] = value;
+
+ return 0;
+}
+
+/* fb_blank
+ * Blank the screen. Depending on the mode, the screen will be
+ * activated with the backlight color, or desactivated
+ */
+static int au1200fb_fb_blank(int blank_mode, struct fb_info *fbi)
+{
+ /* Short-circuit screen blanking */
+ if (noblanking)
+ return 0;
+
+ switch (blank_mode) {
+
+ case FB_BLANK_UNBLANK:
+ case FB_BLANK_NORMAL:
+ /* printk("turn on panel\n"); */
+ au1200_setpanel(panel);
+ break;
+ case FB_BLANK_VSYNC_SUSPEND:
+ case FB_BLANK_HSYNC_SUSPEND:
+ case FB_BLANK_POWERDOWN:
+ /* printk("turn off panel\n"); */
+ au1200_setpanel(NULL);
+ break;
+ default:
+ break;
+
+ }
+
+ /* FB_BLANK_NORMAL is a soft blank */
+ return (blank_mode == FB_BLANK_NORMAL) ? -EINVAL : 0;
+}
+
+/* fb_mmap
+ * Map video memory in user space. We don't use the generic fb_mmap
+ * method mainly to allow the use of the TLB streaming flag (CCA=6)
+ */
+static int au1200fb_fb_mmap(struct fb_info *info, struct vm_area_struct *vma)
+
+{
+ unsigned int len;
+ unsigned long start=0, off;
+ struct au1200fb_device *fbdev = (struct au1200fb_device *) info;
+
+#ifdef CONFIG_PM
+ au1xxx_pm_access(LCD_pm_dev);
+#endif
+
+ if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) {
+ return -EINVAL;
+ }
+
+ start = fbdev->fb_phys & PAGE_MASK;
+ len = PAGE_ALIGN((start & ~PAGE_MASK) + fbdev->fb_len);
+
+ off = vma->vm_pgoff << PAGE_SHIFT;
+
+ if ((vma->vm_end - vma->vm_start + off) > len) {
+ return -EINVAL;
+ }
+
+ off += start;
+ vma->vm_pgoff = off >> PAGE_SHIFT;
+
+ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+ pgprot_val(vma->vm_page_prot) |= _CACHE_MASK; /* CCA=7 */
+
+ vma->vm_flags |= VM_IO;
+
+ return io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
+ vma->vm_end - vma->vm_start,
+ vma->vm_page_prot);
+
+ return 0;
+}
+
+static void set_global(u_int cmd, struct au1200_lcd_global_regs_t *pdata)
+{
+
+ unsigned int hi1, divider;
+
+ /* SCREEN_SIZE: user cannot reset size, must switch panel choice */
+
+ if (pdata->flags & SCREEN_BACKCOLOR)
+ lcd->backcolor = pdata->backcolor;
+
+ if (pdata->flags & SCREEN_BRIGHTNESS) {
+
+ // limit brightness pwm duty to >= 30/1600
+ if (pdata->brightness < 30) {
+ pdata->brightness = 30;
+ }
+ divider = (lcd->pwmdiv & 0x3FFFF) + 1;
+ hi1 = (lcd->pwmhi >> 16) + 1;
+ hi1 = (((pdata->brightness & 0xFF)+1) * divider >> 8);
+ lcd->pwmhi &= 0xFFFF;
+ lcd->pwmhi |= (hi1 << 16);
+ }
+
+ if (pdata->flags & SCREEN_COLORKEY)
+ lcd->colorkey = pdata->colorkey;
+
+ if (pdata->flags & SCREEN_MASK)
+ lcd->colorkeymsk = pdata->mask;
+ au_sync();
+}
+
+static void get_global(u_int cmd, struct au1200_lcd_global_regs_t *pdata)
+{
+ unsigned int hi1, divider;
+
+ pdata->xsize = ((lcd->screen & LCD_SCREEN_SX) >> 19) + 1;
+ pdata->ysize = ((lcd->screen & LCD_SCREEN_SY) >> 8) + 1;
+
+ pdata->backcolor = lcd->backcolor;
+ pdata->colorkey = lcd->colorkey;
+ pdata->mask = lcd->colorkeymsk;
+
+ // brightness
+ hi1 = (lcd->pwmhi >> 16) + 1;
+ divider = (lcd->pwmdiv & 0x3FFFF) + 1;
+ pdata->brightness = ((hi1 << 8) / divider) - 1;
+ au_sync();
+}
+
+static void set_window(unsigned int plane,
+ struct au1200_lcd_window_regs_t *pdata)
+{
+ unsigned int val, bpp;
+
+ /* Window control register 0 */
+ if (pdata->flags & WIN_POSITION) {
+ val = lcd->window[plane].winctrl0 & ~(LCD_WINCTRL0_OX |
+ LCD_WINCTRL0_OY);
+ val |= ((pdata->xpos << 21) & LCD_WINCTRL0_OX);
+ val |= ((pdata->ypos << 10) & LCD_WINCTRL0_OY);
+ lcd->window[plane].winctrl0 = val;
+ }
+ if (pdata->flags & WIN_ALPHA_COLOR) {
+ val = lcd->window[plane].winctrl0 & ~(LCD_WINCTRL0_A);
+ val |= ((pdata->alpha_color << 2) & LCD_WINCTRL0_A);
+ lcd->window[plane].winctrl0 = val;
+ }
+ if (pdata->flags & WIN_ALPHA_MODE) {
+ val = lcd->window[plane].winctrl0 & ~(LCD_WINCTRL0_AEN);
+ val |= ((pdata->alpha_mode << 1) & LCD_WINCTRL0_AEN);
+ lcd->window[plane].winctrl0 = val;
+ }
+
+ /* Window control register 1 */
+ if (pdata->flags & WIN_PRIORITY) {
+ val = lcd->window[plane].winctrl1 & ~(LCD_WINCTRL1_PRI);
+ val |= ((pdata->priority << 30) & LCD_WINCTRL1_PRI);
+ lcd->window[plane].winctrl1 = val;
+ }
+ if (pdata->flags & WIN_CHANNEL) {
+ val = lcd->window[plane].winctrl1 & ~(LCD_WINCTRL1_PIPE);
+ val |= ((pdata->channel << 29) & LCD_WINCTRL1_PIPE);
+ lcd->window[plane].winctrl1 = val;
+ }
+ if (pdata->flags & WIN_BUFFER_FORMAT) {
+ val = lcd->window[plane].winctrl1 & ~(LCD_WINCTRL1_FRM);
+ val |= ((pdata->buffer_format << 25) & LCD_WINCTRL1_FRM);
+ lcd->window[plane].winctrl1 = val;
+ }
+ if (pdata->flags & WIN_COLOR_ORDER) {
+ val = lcd->window[plane].winctrl1 & ~(LCD_WINCTRL1_CCO);
+ val |= ((pdata->color_order << 24) & LCD_WINCTRL1_CCO);
+ lcd->window[plane].winctrl1 = val;
+ }
+ if (pdata->flags & WIN_PIXEL_ORDER) {
+ val = lcd->window[plane].winctrl1 & ~(LCD_WINCTRL1_PO);
+ val |= ((pdata->pixel_order << 22) & LCD_WINCTRL1_PO);
+ lcd->window[plane].winctrl1 = val;
+ }
+ if (pdata->flags & WIN_SIZE) {
+ val = lcd->window[plane].winctrl1 & ~(LCD_WINCTRL1_SZX |
+ LCD_WINCTRL1_SZY);
+ val |= (((pdata->xsize << 11) - 1) & LCD_WINCTRL1_SZX);
+ val |= (((pdata->ysize) - 1) & LCD_WINCTRL1_SZY);
+ lcd->window[plane].winctrl1 = val;
+ /* program buffer line width */
+ bpp = winbpp(val) / 8;
+ val = lcd->window[plane].winctrl2 & ~(LCD_WINCTRL2_BX);
+ val |= (((pdata->xsize * bpp) << 8) & LCD_WINCTRL2_BX);
+ lcd->window[plane].winctrl2 = val;
+ }
+
+ /* Window control register 2 */
+ if (pdata->flags & WIN_COLORKEY_MODE) {
+ val = lcd->window[plane].winctrl2 & ~(LCD_WINCTRL2_CKMODE);
+ val |= ((pdata->colorkey_mode << 24) & LCD_WINCTRL2_CKMODE);
+ lcd->window[plane].winctrl2 = val;
+ }
+ if (pdata->flags & WIN_DOUBLE_BUFFER_MODE) {
+ val = lcd->window[plane].winctrl2 & ~(LCD_WINCTRL2_DBM);
+ val |= ((pdata->double_buffer_mode << 23) & LCD_WINCTRL2_DBM);
+ lcd->window[plane].winctrl2 = val;
+ }
+ if (pdata->flags & WIN_RAM_ARRAY_MODE) {
+ val = lcd->window[plane].winctrl2 & ~(LCD_WINCTRL2_RAM);
+ val |= ((pdata->ram_array_mode << 21) & LCD_WINCTRL2_RAM);
+ lcd->window[plane].winctrl2 = val;
+ }
+
+ /* Buffer line width programmed with WIN_SIZE */
+
+ if (pdata->flags & WIN_BUFFER_SCALE) {
+ val = lcd->window[plane].winctrl2 & ~(LCD_WINCTRL2_SCX |
+ LCD_WINCTRL2_SCY);
+ val |= ((pdata->xsize << 11) & LCD_WINCTRL2_SCX);
+ val |= ((pdata->ysize) & LCD_WINCTRL2_SCY);
+ lcd->window[plane].winctrl2 = val;
+ }
+
+ if (pdata->flags & WIN_ENABLE) {
+ val = lcd->winenable;
+ val &= ~(1<<plane);
+ val |= (pdata->enable & 1) << plane;
+ lcd->winenable = val;
+ }
+ au_sync();
+}
+
+static void get_window(unsigned int plane,
+ struct au1200_lcd_window_regs_t *pdata)
+{
+ /* Window control register 0 */
+ pdata->xpos = (lcd->window[plane].winctrl0 & LCD_WINCTRL0_OX) >> 21;
+ pdata->ypos = (lcd->window[plane].winctrl0 & LCD_WINCTRL0_OY) >> 10;
+ pdata->alpha_color = (lcd->window[plane].winctrl0 & LCD_WINCTRL0_A) >> 2;
+ pdata->alpha_mode = (lcd->window[plane].winctrl0 & LCD_WINCTRL0_AEN) >> 1;
+
+ /* Window control register 1 */
+ pdata->priority = (lcd->window[plane].winctrl1& LCD_WINCTRL1_PRI) >> 30;
+ pdata->channel = (lcd->window[plane].winctrl1 & LCD_WINCTRL1_PIPE) >> 29;
+ pdata->buffer_format = (lcd->window[plane].winctrl1 & LCD_WINCTRL1_FRM) >> 25;
+ pdata->color_order = (lcd->window[plane].winctrl1 & LCD_WINCTRL1_CCO) >> 24;
+ pdata->pixel_order = (lcd->window[plane].winctrl1 & LCD_WINCTRL1_PO) >> 22;
+ pdata->xsize = ((lcd->window[plane].winctrl1 & LCD_WINCTRL1_SZX) >> 11) + 1;
+ pdata->ysize = (lcd->window[plane].winctrl1 & LCD_WINCTRL1_SZY) + 1;
+
+ /* Window control register 2 */
+ pdata->colorkey_mode = (lcd->window[plane].winctrl2 & LCD_WINCTRL2_CKMODE) >> 24;
+ pdata->double_buffer_mode = (lcd->window[plane].winctrl2 & LCD_WINCTRL2_DBM) >> 23;
+ pdata->ram_array_mode = (lcd->window[plane].winctrl2 & LCD_WINCTRL2_RAM) >> 21;
+
+ pdata->enable = (lcd->winenable >> plane) & 1;
+ au_sync();
+}
+
+static int au1200fb_ioctl(struct fb_info *info, unsigned int cmd,
+ unsigned long arg)
+{
+ int plane;
+ int val;
+
+#ifdef CONFIG_PM
+ au1xxx_pm_access(LCD_pm_dev);
+#endif
+
+ plane = fbinfo2index(info);
+ print_dbg("au1200fb: ioctl %d on plane %d\n", cmd, plane);
+
+ if (cmd == AU1200_LCD_FB_IOCTL) {
+ struct au1200_lcd_iodata_t iodata;
+
+ if (copy_from_user(&iodata, (void __user *) arg, sizeof(iodata)))
+ return -EFAULT;
+
+ print_dbg("FB IOCTL called\n");
+
+ switch (iodata.subcmd) {
+ case AU1200_LCD_SET_SCREEN:
+ print_dbg("AU1200_LCD_SET_SCREEN\n");
+ set_global(cmd, &iodata.global);
+ break;
+
+ case AU1200_LCD_GET_SCREEN:
+ print_dbg("AU1200_LCD_GET_SCREEN\n");
+ get_global(cmd, &iodata.global);
+ break;
+
+ case AU1200_LCD_SET_WINDOW:
+ print_dbg("AU1200_LCD_SET_WINDOW\n");
+ set_window(plane, &iodata.window);
+ break;
+
+ case AU1200_LCD_GET_WINDOW:
+ print_dbg("AU1200_LCD_GET_WINDOW\n");
+ get_window(plane, &iodata.window);
+ break;
+
+ case AU1200_LCD_SET_PANEL:
+ print_dbg("AU1200_LCD_SET_PANEL\n");
+ if ((iodata.global.panel_choice >= 0) &&
+ (iodata.global.panel_choice <
+ NUM_PANELS))
+ {
+ struct panel_settings *newpanel;
+ panel_index = iodata.global.panel_choice;
+ newpanel = &known_lcd_panels[panel_index];
+ au1200_setpanel(newpanel);
+ }
+ break;
+
+ case AU1200_LCD_GET_PANEL:
+ print_dbg("AU1200_LCD_GET_PANEL\n");
+ iodata.global.panel_choice = panel_index;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ val = copy_to_user((void __user *) arg, &iodata, sizeof(iodata));
+ if (val) {
+ print_dbg("error: could not copy %d bytes\n", val);
+ return -EFAULT;
+ }
+ }
+
+ return 0;
+}
+
+
+static struct fb_ops au1200fb_fb_ops = {
+ .owner = THIS_MODULE,
+ .fb_check_var = au1200fb_fb_check_var,
+ .fb_set_par = au1200fb_fb_set_par,
+ .fb_setcolreg = au1200fb_fb_setcolreg,
+ .fb_blank = au1200fb_fb_blank,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+ .fb_sync = NULL,
+ .fb_ioctl = au1200fb_ioctl,
+ .fb_mmap = au1200fb_fb_mmap,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static irqreturn_t au1200fb_handle_irq(int irq, void* dev_id, struct pt_regs *regs)
+{
+ /* Nothing to do for now, just clear any pending interrupt */
+ lcd->intstatus = lcd->intstatus;
+ au_sync();
+
+ return IRQ_HANDLED;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* AU1200 LCD device probe helpers */
+
+static int au1200fb_init_fbinfo(struct au1200fb_device *fbdev)
+{
+ struct fb_info *fbi = &fbdev->fb_info;
+ int bpp;
+
+ memset(fbi, 0, sizeof(struct fb_info));
+ fbi->fbops = &au1200fb_fb_ops;
+
+ bpp = winbpp(win->w[fbdev->plane].mode_winctrl1);
+
+ /* Copy monitor specs from panel data */
+ /* fixme: we're setting up LCD controller windows, so these dont give a
+ damn as to what the monitor specs are (the panel itself does, but that
+ isnt done here...so maybe need a generic catchall monitor setting??? */
+ memcpy(&fbi->monspecs, &panel->monspecs, sizeof(struct fb_monspecs));
+
+ /* We first try the user mode passed in argument. If that failed,
+ * or if no one has been specified, we default to the first mode of the
+ * panel list. Note that after this call, var data will be set */
+ if (!fb_find_mode(&fbi->var,
+ fbi,
+ NULL, /* drv_info.opt_mode, */
+ fbi->monspecs.modedb,
+ fbi->monspecs.modedb_len,
+ fbi->monspecs.modedb,
+ bpp)) {
+
+ print_err("Cannot find valid mode for panel %s", panel->name);
+ return -EFAULT;
+ }
+
+ fbi->pseudo_palette = kmalloc(sizeof(u32) * 16, GFP_KERNEL);
+ if (!fbi->pseudo_palette) {
+ return -ENOMEM;
+ }
+ memset(fbi->pseudo_palette, 0, sizeof(u32) * 16);
+
+ if (fb_alloc_cmap(&fbi->cmap, AU1200_LCD_NBR_PALETTE_ENTRIES, 0) < 0) {
+ print_err("Fail to allocate colormap (%d entries)",
+ AU1200_LCD_NBR_PALETTE_ENTRIES);
+ kfree(fbi->pseudo_palette);
+ return -EFAULT;
+ }
+
+ strncpy(fbi->fix.id, "AU1200", sizeof(fbi->fix.id));
+ fbi->fix.smem_start = fbdev->fb_phys;
+ fbi->fix.smem_len = fbdev->fb_len;
+ fbi->fix.type = FB_TYPE_PACKED_PIXELS;
+ fbi->fix.xpanstep = 0;
+ fbi->fix.ypanstep = 0;
+ fbi->fix.mmio_start = 0;
+ fbi->fix.mmio_len = 0;
+ fbi->fix.accel = FB_ACCEL_NONE;
+
+ fbi->screen_base = (char __iomem *) fbdev->fb_mem;
+
+ au1200fb_update_fbinfo(fbi);
+
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* AU1200 LCD controller device driver */
+
+static int au1200fb_drv_probe(struct device *dev)
+{
+ struct au1200fb_device *fbdev;
+ unsigned long page;
+ int bpp, plane, ret;
+
+ if (!dev)
+ return -EINVAL;
+
+ for (plane = 0; plane < CONFIG_FB_AU1200_DEVS; ++plane) {
+ bpp = winbpp(win->w[plane].mode_winctrl1);
+ if (win->w[plane].xres == 0)
+ win->w[plane].xres = panel->Xres;
+ if (win->w[plane].yres == 0)
+ win->w[plane].yres = panel->Yres;
+
+ fbdev = &_au1200fb_devices[plane];
+ memset(fbdev, 0, sizeof(struct au1200fb_device));
+ fbdev->plane = plane;
+
+ /* Allocate the framebuffer to the maximum screen size */
+ fbdev->fb_len = (win->w[plane].xres * win->w[plane].yres * bpp) / 8;
+
+ fbdev->fb_mem = dma_alloc_noncoherent(dev,
+ PAGE_ALIGN(fbdev->fb_len),
+ &fbdev->fb_phys, GFP_KERNEL);
+ if (!fbdev->fb_mem) {
+ print_err("fail to allocate frambuffer (size: %dK))",
+ fbdev->fb_len / 1024);
+ return -ENOMEM;
+ }
+
+ /*
+ * Set page reserved so that mmap will work. This is necessary
+ * since we'll be remapping normal memory.
+ */
+ for (page = (unsigned long)fbdev->fb_phys;
+ page < PAGE_ALIGN((unsigned long)fbdev->fb_phys +
+ fbdev->fb_len);
+ page += PAGE_SIZE) {
+ SetPageReserved(pfn_to_page(page >> PAGE_SHIFT)); /* LCD DMA is NOT coherent on Au1200 */
+ }
+ print_dbg("Framebuffer memory map at %p", fbdev->fb_mem);
+ print_dbg("phys=0x%08x, size=%dK", fbdev->fb_phys, fbdev->fb_len / 1024);
+
+ /* Init FB data */
+ if ((ret = au1200fb_init_fbinfo(fbdev)) < 0)
+ goto failed;
+
+ /* Register new framebuffer */
+ if ((ret = register_framebuffer(&fbdev->fb_info)) < 0) {
+ print_err("cannot register new framebuffer");
+ goto failed;
+ }
+
+ au1200fb_fb_set_par(&fbdev->fb_info);
+
+#if !defined(CONFIG_FRAMEBUFFER_CONSOLE) && defined(CONFIG_LOGO)
+ if (plane == 0)
+ if (fb_prepare_logo(&fbdev->fb_info, FB_ROTATE_UR)) {
+ /* Start display and show logo on boot */
+ fb_set_cmap(&fbdev->fb_info.cmap,
+ &fbdev->fb_info);
+
+ fb_show_logo(&fbdev->fb_info, FB_ROTATE_UR);
+ }
+#endif
+ }
+
+ /* Now hook interrupt too */
+ if ((ret = request_irq(AU1200_LCD_INT, au1200fb_handle_irq,
+ SA_INTERRUPT | SA_SHIRQ, "lcd", (void *)dev)) < 0) {
+ print_err("fail to request interrupt line %d (err: %d)",
+ AU1200_LCD_INT, ret);
+ goto failed;
+ }
+
+ return 0;
+
+failed:
+ /* NOTE: This only does the current plane/window that failed; others are still active */
+ if (fbdev->fb_mem)
+ dma_free_noncoherent(dev, PAGE_ALIGN(fbdev->fb_len),
+ fbdev->fb_mem, fbdev->fb_phys);
+ if (fbdev->fb_info.cmap.len != 0)
+ fb_dealloc_cmap(&fbdev->fb_info.cmap);
+ if (fbdev->fb_info.pseudo_palette)
+ kfree(fbdev->fb_info.pseudo_palette);
+ if (plane == 0)
+ free_irq(AU1200_LCD_INT, (void*)dev);
+ return ret;
+}
+
+static int au1200fb_drv_remove(struct device *dev)
+{
+ struct au1200fb_device *fbdev;
+ int plane;
+
+ if (!dev)
+ return -ENODEV;
+
+ /* Turn off the panel */
+ au1200_setpanel(NULL);
+
+ for (plane = 0; plane < CONFIG_FB_AU1200_DEVS; ++plane)
+ {
+ fbdev = &_au1200fb_devices[plane];
+
+ /* Clean up all probe data */
+ unregister_framebuffer(&fbdev->fb_info);
+ if (fbdev->fb_mem)
+ dma_free_noncoherent(dev, PAGE_ALIGN(fbdev->fb_len),
+ fbdev->fb_mem, fbdev->fb_phys);
+ if (fbdev->fb_info.cmap.len != 0)
+ fb_dealloc_cmap(&fbdev->fb_info.cmap);
+ if (fbdev->fb_info.pseudo_palette)
+ kfree(fbdev->fb_info.pseudo_palette);
+ }
+
+ free_irq(AU1200_LCD_INT, (void *)dev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int au1200fb_drv_suspend(struct device *dev, u32 state, u32 level)
+{
+ /* TODO */
+ return 0;
+}
+
+static int au1200fb_drv_resume(struct device *dev, u32 level)
+{
+ /* TODO */
+ return 0;
+}
+#endif /* CONFIG_PM */
+
+static struct device_driver au1200fb_driver = {
+ .name = "au1200-lcd",
+ .bus = &platform_bus_type,
+ .probe = au1200fb_drv_probe,
+ .remove = au1200fb_drv_remove,
+#ifdef CONFIG_PM
+ .suspend = au1200fb_drv_suspend,
+ .resume = au1200fb_drv_resume,
+#endif
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* Kernel driver */
+
+static void au1200fb_setup(void)
+{
+ char* options = NULL;
+ char* this_opt;
+ int num_panels = ARRAY_SIZE(known_lcd_panels);
+ int panel_idx = -1;
+
+ fb_get_options(DRIVER_NAME, &options);
+
+ if (options) {
+ while ((this_opt = strsep(&options,",")) != NULL) {
+ /* Panel option - can be panel name,
+ * "bs" for board-switch, or number/index */
+ if (!strncmp(this_opt, "panel:", 6)) {
+ int i;
+ long int li;
+ char *endptr;
+ this_opt += 6;
+ /* First check for index, which allows
+ * to short circuit this mess */
+ li = simple_strtol(this_opt, &endptr, 0);
+ if (*endptr == '\0') {
+ panel_idx = (int)li;
+ }
+ else if (strcmp(this_opt, "bs") == 0) {
+ extern int board_au1200fb_panel(void);
+ panel_idx = board_au1200fb_panel();
+ }
+
+ else
+ for (i = 0; i < num_panels; i++) {
+ if (!strcmp(this_opt, known_lcd_panels[i].name)) {
+ panel_idx = i;
+ break;
+ }
+ }
+
+ if ((panel_idx < 0) || (panel_idx >= num_panels)) {
+ print_warn("Panel %s not supported!", this_opt);
+ }
+ else
+ panel_index = panel_idx;
+ }
+
+ else if (strncmp(this_opt, "nohwcursor", 10) == 0) {
+ nohwcursor = 1;
+ }
+
+ /* Unsupported option */
+ else {
+ print_warn("Unsupported option \"%s\"", this_opt);
+ }
+ }
+ }
+}
+
+#ifdef CONFIG_PM
+static int au1200fb_pm_callback(au1xxx_power_dev_t *dev,
+ au1xxx_request_t request, void *data) {
+ int retval = -1;
+ unsigned int d = 0;
+ unsigned int brightness = 0;
+
+ if (request == AU1XXX_PM_SLEEP) {
+ board_au1200fb_panel_shutdown();
+ }
+ else if (request == AU1XXX_PM_WAKEUP) {
+ if(dev->prev_state == SLEEP_STATE)
+ {
+ int plane;
+ au1200_setpanel(panel);
+ for (plane = 0; plane < CONFIG_FB_AU1200_DEVS; ++plane) {
+ struct au1200fb_device *fbdev;
+ fbdev = &_au1200fb_devices[plane];
+ au1200fb_fb_set_par(&fbdev->fb_info);
+ }
+ }
+
+ d = *((unsigned int*)data);
+ if(d <=10) brightness = 26;
+ else if(d<=20) brightness = 51;
+ else if(d<=30) brightness = 77;
+ else if(d<=40) brightness = 102;
+ else if(d<=50) brightness = 128;
+ else if(d<=60) brightness = 153;
+ else if(d<=70) brightness = 179;
+ else if(d<=80) brightness = 204;
+ else if(d<=90) brightness = 230;
+ else brightness = 255;
+ set_brightness(brightness);
+ } else if (request == AU1XXX_PM_GETSTATUS) {
+ return dev->cur_state;
+ } else if (request == AU1XXX_PM_ACCESS) {
+ if (dev->cur_state != SLEEP_STATE)
+ return retval;
+ else {
+ au1200_setpanel(panel);
+ }
+ } else if (request == AU1XXX_PM_IDLE) {
+ } else if (request == AU1XXX_PM_CLEANUP) {
+ }
+
+ return retval;
+}
+#endif
+
+static int __init au1200fb_init(void)
+{
+ print_info("" DRIVER_DESC "");
+
+ /* Setup driver with options */
+ au1200fb_setup();
+
+ /* Point to the panel selected */
+ panel = &known_lcd_panels[panel_index];
+ win = &windows[window_index];
+
+ printk(DRIVER_NAME ": Panel %d %s\n", panel_index, panel->name);
+ printk(DRIVER_NAME ": Win %d %s\n", window_index, win->name);
+
+ /* Kickstart the panel, the framebuffers/windows come soon enough */
+ au1200_setpanel(panel);
+
+ #ifdef CONFIG_PM
+ LCD_pm_dev = new_au1xxx_power_device("LCD", &au1200fb_pm_callback, NULL);
+ if ( LCD_pm_dev == NULL)
+ printk(KERN_INFO "Unable to create a power management device entry for the au1200fb.\n");
+ else
+ printk(KERN_INFO "Power management device entry for the au1200fb loaded.\n");
+ #endif
+
+ return driver_register(&au1200fb_driver);
+}
+
+static void __exit au1200fb_cleanup(void)
+{
+ driver_unregister(&au1200fb_driver);
+}
+
+module_init(au1200fb_init);
+module_exit(au1200fb_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+/*
+ * BRIEF MODULE DESCRIPTION
+ * Au1200 LCD Driver.
+ *
+ * Copyright 2004-2005 AMD
+ * Author: AMD
+ *
+ * Based on:
+ * linux/drivers/video/skeletonfb.c -- Skeleton for a frame buffer device
+ * Created 28 Dec 1997 by Geert Uytterhoeven
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ctype.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/mach-au1x00/au1000.h>
+#include "au1200fb.h"
+
+#ifdef CONFIG_PM
+#include <asm/mach-au1x00/au1xxx_pm.h>
+#endif
+
+#ifndef CONFIG_FB_AU1200_DEVS
+#define CONFIG_FB_AU1200_DEVS 4
+#endif
+
+#define DRIVER_NAME "au1200fb"
+#define DRIVER_DESC "LCD controller driver for AU1200 processors"
+
+#define DEBUG 1
+
+#define print_err(f, arg...) printk(KERN_ERR DRIVER_NAME ": " f "\n", ## arg)
+#define print_warn(f, arg...) printk(KERN_WARNING DRIVER_NAME ": " f "\n", ## arg)
+#define print_info(f, arg...) printk(KERN_INFO DRIVER_NAME ": " f "\n", ## arg)
+
+#if DEBUG
+#define print_dbg(f, arg...) printk(KERN_DEBUG __FILE__ ": " f "\n", ## arg)
+#else
+#define print_dbg(f, arg...) do {} while (0)
+#endif
+
+
+#define AU1200_LCD_FB_IOCTL 0x46FF
+
+#define AU1200_LCD_SET_SCREEN 1
+#define AU1200_LCD_GET_SCREEN 2
+#define AU1200_LCD_SET_WINDOW 3
+#define AU1200_LCD_GET_WINDOW 4
+#define AU1200_LCD_SET_PANEL 5
+#define AU1200_LCD_GET_PANEL 6
+
+#define SCREEN_SIZE (1<< 1)
+#define SCREEN_BACKCOLOR (1<< 2)
+#define SCREEN_BRIGHTNESS (1<< 3)
+#define SCREEN_COLORKEY (1<< 4)
+#define SCREEN_MASK (1<< 5)
+
+struct au1200_lcd_global_regs_t {
+ unsigned int flags;
+ unsigned int xsize;
+ unsigned int ysize;
+ unsigned int backcolor;
+ unsigned int brightness;
+ unsigned int colorkey;
+ unsigned int mask;
+ unsigned int panel_choice;
+ char panel_desc[80];
+
+};
+
+#define WIN_POSITION (1<< 0)
+#define WIN_ALPHA_COLOR (1<< 1)
+#define WIN_ALPHA_MODE (1<< 2)
+#define WIN_PRIORITY (1<< 3)
+#define WIN_CHANNEL (1<< 4)
+#define WIN_BUFFER_FORMAT (1<< 5)
+#define WIN_COLOR_ORDER (1<< 6)
+#define WIN_PIXEL_ORDER (1<< 7)
+#define WIN_SIZE (1<< 8)
+#define WIN_COLORKEY_MODE (1<< 9)
+#define WIN_DOUBLE_BUFFER_MODE (1<< 10)
+#define WIN_RAM_ARRAY_MODE (1<< 11)
+#define WIN_BUFFER_SCALE (1<< 12)
+#define WIN_ENABLE (1<< 13)
+
+struct au1200_lcd_window_regs_t {
+ unsigned int flags;
+ unsigned int xpos;
+ unsigned int ypos;
+ unsigned int alpha_color;
+ unsigned int alpha_mode;
+ unsigned int priority;
+ unsigned int channel;
+ unsigned int buffer_format;
+ unsigned int color_order;
+ unsigned int pixel_order;
+ unsigned int xsize;
+ unsigned int ysize;
+ unsigned int colorkey_mode;
+ unsigned int double_buffer_mode;
+ unsigned int ram_array_mode;
+ unsigned int xscale;
+ unsigned int yscale;
+ unsigned int enable;
+};
+
+
+struct au1200_lcd_iodata_t {
+ unsigned int subcmd;
+ struct au1200_lcd_global_regs_t global;
+ struct au1200_lcd_window_regs_t window;
+};
+
+#if defined(__BIG_ENDIAN)
+#define LCD_CONTROL_DEFAULT_PO LCD_CONTROL_PO_11
+#else
+#define LCD_CONTROL_DEFAULT_PO LCD_CONTROL_PO_00
+#endif
+#define LCD_CONTROL_DEFAULT_SBPPF LCD_CONTROL_SBPPF_565
+
+/* Private, per-framebuffer management information (independent of the panel itself) */
+struct au1200fb_device {
+ struct fb_info fb_info; /* FB driver info record */
+
+ int plane;
+ unsigned char* fb_mem; /* FrameBuffer memory map */
+ unsigned int fb_len;
+ dma_addr_t fb_phys;
+};
+
+static struct au1200fb_device _au1200fb_devices[CONFIG_FB_AU1200_DEVS];
+/********************************************************************/
+
+/* LCD controller restrictions */
+#define AU1200_LCD_MAX_XRES 1280
+#define AU1200_LCD_MAX_YRES 1024
+#define AU1200_LCD_MAX_BPP 32
+#define AU1200_LCD_MAX_CLK 96000000 /* fixme: this needs to go away ? */
+#define AU1200_LCD_NBR_PALETTE_ENTRIES 256
+
+/* Default number of visible screen buffer to allocate */
+#define AU1200FB_NBR_VIDEO_BUFFERS 1
+
+/********************************************************************/
+
+static struct au1200_lcd *lcd = (struct au1200_lcd *) AU1200_LCD_ADDR;
+static int window_index = 2; /* default is zero */
+static int panel_index = 2; /* default is zero */
+static struct window_settings *win;
+static struct panel_settings *panel;
+static int noblanking = 1;
+static int nohwcursor = 0;
+
+struct window_settings {
+ unsigned char name[64];
+ uint32 mode_backcolor;
+ uint32 mode_colorkey;
+ uint32 mode_colorkeymsk;
+ struct {
+ int xres;
+ int yres;
+ int xpos;
+ int ypos;
+ uint32 mode_winctrl1; /* winctrl1[FRM,CCO,PO,PIPE] */
+ uint32 mode_winenable;
+ } w[4];
+};
+
+#if defined(__BIG_ENDIAN)
+#define LCD_WINCTRL1_PO_16BPP LCD_WINCTRL1_PO_00
+#else
+#define LCD_WINCTRL1_PO_16BPP LCD_WINCTRL1_PO_01
+#endif
+
+extern int board_au1200fb_panel_init (void);
+extern int board_au1200fb_panel_shutdown (void);
+
+#ifdef CONFIG_PM
+int au1200fb_pm_callback(au1xxx_power_dev_t *dev,
+ au1xxx_request_t request, void *data);
+au1xxx_power_dev_t *LCD_pm_dev;
+#endif
+
+/*
+ * Default window configurations
+ */
+static struct window_settings windows[] = {
+ { /* Index 0 */
+ "0-FS gfx, 1-video, 2-ovly gfx, 3-ovly gfx",
+ /* mode_backcolor */ 0x006600ff,
+ /* mode_colorkey,msk*/ 0, 0,
+ {
+ {
+ /* xres, yres, xpos, ypos */ 0, 0, 0, 0,
+ /* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565 |
+ LCD_WINCTRL1_PO_16BPP,
+ /* mode_winenable*/ LCD_WINENABLE_WEN0,
+ },
+ {
+ /* xres, yres, xpos, ypos */ 100, 100, 100, 100,
+ /* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565 |
+ LCD_WINCTRL1_PO_16BPP |
+ LCD_WINCTRL1_PIPE,
+ /* mode_winenable*/ LCD_WINENABLE_WEN1,
+ },
+ {
+ /* xres, yres, xpos, ypos */ 0, 0, 0, 0,
+ /* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565 |
+ LCD_WINCTRL1_PO_16BPP,
+ /* mode_winenable*/ 0,
+ },
+ {
+ /* xres, yres, xpos, ypos */ 0, 0, 0, 0,
+ /* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565 |
+ LCD_WINCTRL1_PO_16BPP |
+ LCD_WINCTRL1_PIPE,
+ /* mode_winenable*/ 0,
+ },
+ },
+ },
+
+ { /* Index 1 */
+ "0-FS gfx, 1-video, 2-ovly gfx, 3-ovly gfx",
+ /* mode_backcolor */ 0x006600ff,
+ /* mode_colorkey,msk*/ 0, 0,
+ {
+ {
+ /* xres, yres, xpos, ypos */ 320, 240, 5, 5,
+ /* mode_winctrl1 */ LCD_WINCTRL1_FRM_24BPP |
+ LCD_WINCTRL1_PO_00,
+ /* mode_winenable*/ LCD_WINENABLE_WEN0,
+ },
+ {
+ /* xres, yres, xpos, ypos */ 0, 0, 0, 0,
+ /* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565
+ | LCD_WINCTRL1_PO_16BPP,
+ /* mode_winenable*/ 0,
+ },
+ {
+ /* xres, yres, xpos, ypos */ 100, 100, 0, 0,
+ /* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565 |
+ LCD_WINCTRL1_PO_16BPP |
+ LCD_WINCTRL1_PIPE,
+ /* mode_winenable*/ 0/*LCD_WINENABLE_WEN2*/,
+ },
+ {
+ /* xres, yres, xpos, ypos */ 200, 25, 0, 0,
+ /* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565 |
+ LCD_WINCTRL1_PO_16BPP |
+ LCD_WINCTRL1_PIPE,
+ /* mode_winenable*/ 0,
+ },
+ },
+ },
+ { /* Index 2 */
+ "0-FS gfx, 1-video, 2-ovly gfx, 3-ovly gfx",
+ /* mode_backcolor */ 0x006600ff,
+ /* mode_colorkey,msk*/ 0, 0,
+ {
+ {
+ /* xres, yres, xpos, ypos */ 0, 0, 0, 0,
+ /* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565 |
+ LCD_WINCTRL1_PO_16BPP,
+ /* mode_winenable*/ LCD_WINENABLE_WEN0,
+ },
+ {
+ /* xres, yres, xpos, ypos */ 0, 0, 0, 0,
+ /* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565 |
+ LCD_WINCTRL1_PO_16BPP,
+ /* mode_winenable*/ 0,
+ },
+ {
+ /* xres, yres, xpos, ypos */ 0, 0, 0, 0,
+ /* mode_winctrl1 */ LCD_WINCTRL1_FRM_32BPP |
+ LCD_WINCTRL1_PO_00|LCD_WINCTRL1_PIPE,
+ /* mode_winenable*/ 0/*LCD_WINENABLE_WEN2*/,
+ },
+ {
+ /* xres, yres, xpos, ypos */ 0, 0, 0, 0,
+ /* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565 |
+ LCD_WINCTRL1_PO_16BPP |
+ LCD_WINCTRL1_PIPE,
+ /* mode_winenable*/ 0,
+ },
+ },
+ },
+ /* Need VGA 640 @ 24bpp, @ 32bpp */
+ /* Need VGA 800 @ 24bpp, @ 32bpp */
+ /* Need VGA 1024 @ 24bpp, @ 32bpp */
+};
+
+/*
+ * Controller configurations for various panels.
+ */
+
+struct panel_settings
+{
+ const char name[25]; /* Full name <vendor>_<model> */
+
+ struct fb_monspecs monspecs; /* FB monitor specs */
+
+ /* panel timings */
+ uint32 mode_screen;
+ uint32 mode_horztiming;
+ uint32 mode_verttiming;
+ uint32 mode_clkcontrol;
+ uint32 mode_pwmdiv;
+ uint32 mode_pwmhi;
+ uint32 mode_outmask;
+ uint32 mode_fifoctrl;
+ uint32 mode_toyclksrc;
+ uint32 mode_backlight;
+ uint32 mode_auxpll;
+ int (*device_init)(void);
+ int (*device_shutdown)(void);
+#define Xres min_xres
+#define Yres min_yres
+ u32 min_xres; /* Minimum horizontal resolution */
+ u32 max_xres; /* Maximum horizontal resolution */
+ u32 min_yres; /* Minimum vertical resolution */
+ u32 max_yres; /* Maximum vertical resolution */
+};
+
+/********************************************************************/
+/* fixme: Maybe a modedb for the CRT ? otherwise panels should be as-is */
+
+/* List of panels known to work with the AU1200 LCD controller.
+ * To add a new panel, enter the same specifications as the
+ * Generic_TFT one, and MAKE SURE that it doesn't conflicts
+ * with the controller restrictions. Restrictions are:
+ *
+ * STN color panels: max_bpp <= 12
+ * STN mono panels: max_bpp <= 4
+ * TFT panels: max_bpp <= 16
+ * max_xres <= 800
+ * max_yres <= 600
+ */
+static struct panel_settings known_lcd_panels[] =
+{
+ [0] = { /* QVGA 320x240 H:33.3kHz V:110Hz */
+ .name = "QVGA_320x240",
+ .monspecs = {
+ .modedb = NULL,
+ .modedb_len = 0,
+ .hfmin = 30000,
+ .hfmax = 70000,
+ .vfmin = 60,
+ .vfmax = 60,
+ .dclkmin = 6000000,
+ .dclkmax = 28000000,
+ .input = FB_DISP_RGB,
+ },
+ .mode_screen = LCD_SCREEN_SX_N(320) |
+ LCD_SCREEN_SY_N(240),
+ .mode_horztiming = 0x00c4623b,
+ .mode_verttiming = 0x00502814,
+ .mode_clkcontrol = 0x00020002, /* /4=24Mhz */
+ .mode_pwmdiv = 0x00000000,
+ .mode_pwmhi = 0x00000000,
+ .mode_outmask = 0x00FFFFFF,
+ .mode_fifoctrl = 0x2f2f2f2f,
+ .mode_toyclksrc = 0x00000004, /* AUXPLL directly */
+ .mode_backlight = 0x00000000,
+ .mode_auxpll = 8, /* 96MHz AUXPLL */
+ .device_init = NULL,
+ .device_shutdown = NULL,
+ 320, 320,
+ 240, 240,
+ },
+
+ [1] = { /* VGA 640x480 H:30.3kHz V:58Hz */
+ .name = "VGA_640x480",
+ .monspecs = {
+ .modedb = NULL,
+ .modedb_len = 0,
+ .hfmin = 30000,
+ .hfmax = 70000,
+ .vfmin = 60,
+ .vfmax = 60,
+ .dclkmin = 6000000,
+ .dclkmax = 28000000,
+ .input = FB_DISP_RGB,
+ },
+ .mode_screen = 0x13f9df80,
+ .mode_horztiming = 0x003c5859,
+ .mode_verttiming = 0x00741201,
+ .mode_clkcontrol = 0x00020001, /* /4=24Mhz */
+ .mode_pwmdiv = 0x00000000,
+ .mode_pwmhi = 0x00000000,
+ .mode_outmask = 0x00FFFFFF,
+ .mode_fifoctrl = 0x2f2f2f2f,
+ .mode_toyclksrc = 0x00000004, /* AUXPLL directly */
+ .mode_backlight = 0x00000000,
+ .mode_auxpll = 8, /* 96MHz AUXPLL */
+ .device_init = NULL,
+ .device_shutdown = NULL,
+ 640, 480,
+ 640, 480,
+ },
+
+ [2] = { /* SVGA 800x600 H:46.1kHz V:69Hz */
+ .name = "SVGA_800x600",
+ .monspecs = {
+ .modedb = NULL,
+ .modedb_len = 0,
+ .hfmin = 30000,
+ .hfmax = 70000,
+ .vfmin = 60,
+ .vfmax = 60,
+ .dclkmin = 6000000,
+ .dclkmax = 28000000,
+ .input = FB_DISP_RGB,
+ },
+ .mode_screen = 0x18fa5780,
+ .mode_horztiming = 0x00dc7e77,
+ .mode_verttiming = 0x00584805,
+ .mode_clkcontrol = 0x00020000, /* /2=48Mhz */
+ .mode_pwmdiv = 0x00000000,
+ .mode_pwmhi = 0x00000000,
+ .mode_outmask = 0x00FFFFFF,
+ .mode_fifoctrl = 0x2f2f2f2f,
+ .mode_toyclksrc = 0x00000004, /* AUXPLL directly */
+ .mode_backlight = 0x00000000,
+ .mode_auxpll = 8, /* 96MHz AUXPLL */
+ .device_init = NULL,
+ .device_shutdown = NULL,
+ 800, 800,
+ 600, 600,
+ },
+
+ [3] = { /* XVGA 1024x768 H:56.2kHz V:70Hz */
+ .name = "XVGA_1024x768",
+ .monspecs = {
+ .modedb = NULL,
+ .modedb_len = 0,
+ .hfmin = 30000,
+ .hfmax = 70000,
+ .vfmin = 60,
+ .vfmax = 60,
+ .dclkmin = 6000000,
+ .dclkmax = 28000000,
+ .input = FB_DISP_RGB,
+ },
+ .mode_screen = 0x1ffaff80,
+ .mode_horztiming = 0x007d0e57,
+ .mode_verttiming = 0x00740a01,
+ .mode_clkcontrol = 0x000A0000, /* /1 */
+ .mode_pwmdiv = 0x00000000,
+ .mode_pwmhi = 0x00000000,
+ .mode_outmask = 0x00FFFFFF,
+ .mode_fifoctrl = 0x2f2f2f2f,
+ .mode_toyclksrc = 0x00000004, /* AUXPLL directly */
+ .mode_backlight = 0x00000000,
+ .mode_auxpll = 6, /* 72MHz AUXPLL */
+ .device_init = NULL,
+ .device_shutdown = NULL,
+ 1024, 1024,
+ 768, 768,
+ },
+
+ [4] = { /* XVGA XVGA 1280x1024 H:68.5kHz V:65Hz */
+ .name = "XVGA_1280x1024",
+ .monspecs = {
+ .modedb = NULL,
+ .modedb_len = 0,
+ .hfmin = 30000,
+ .hfmax = 70000,
+ .vfmin = 60,
+ .vfmax = 60,
+ .dclkmin = 6000000,
+ .dclkmax = 28000000,
+ .input = FB_DISP_RGB,
+ },
+ .mode_screen = 0x27fbff80,
+ .mode_horztiming = 0x00cdb2c7,
+ .mode_verttiming = 0x00600002,
+ .mode_clkcontrol = 0x000A0000, /* /1 */
+ .mode_pwmdiv = 0x00000000,
+ .mode_pwmhi = 0x00000000,
+ .mode_outmask = 0x00FFFFFF,
+ .mode_fifoctrl = 0x2f2f2f2f,
+ .mode_toyclksrc = 0x00000004, /* AUXPLL directly */
+ .mode_backlight = 0x00000000,
+ .mode_auxpll = 10, /* 120MHz AUXPLL */
+ .device_init = NULL,
+ .device_shutdown = NULL,
+ 1280, 1280,
+ 1024, 1024,
+ },
+
+ [5] = { /* Samsung 1024x768 TFT */
+ .name = "Samsung_1024x768_TFT",
+ .monspecs = {
+ .modedb = NULL,
+ .modedb_len = 0,
+ .hfmin = 30000,
+ .hfmax = 70000,
+ .vfmin = 60,
+ .vfmax = 60,
+ .dclkmin = 6000000,
+ .dclkmax = 28000000,
+ .input = FB_DISP_RGB,
+ },
+ .mode_screen = 0x1ffaff80,
+ .mode_horztiming = 0x018cc677,
+ .mode_verttiming = 0x00241217,
+ .mode_clkcontrol = 0x00000000, /* SCB 0x1 /4=24Mhz */
+ .mode_pwmdiv = 0x8000063f, /* SCB 0x0 */
+ .mode_pwmhi = 0x03400000, /* SCB 0x0 */
+ .mode_outmask = 0x00FFFFFF,
+ .mode_fifoctrl = 0x2f2f2f2f,
+ .mode_toyclksrc = 0x00000004, /* AUXPLL directly */
+ .mode_backlight = 0x00000000,
+ .mode_auxpll = 8, /* 96MHz AUXPLL */
+ .device_init = board_au1200fb_panel_init,
+ .device_shutdown = board_au1200fb_panel_shutdown,
+ 1024, 1024,
+ 768, 768,
+ },
+
+ [6] = { /* Toshiba 640x480 TFT */
+ .name = "Toshiba_640x480_TFT",
+ .monspecs = {
+ .modedb = NULL,
+ .modedb_len = 0,
+ .hfmin = 30000,
+ .hfmax = 70000,
+ .vfmin = 60,
+ .vfmax = 60,
+ .dclkmin = 6000000,
+ .dclkmax = 28000000,
+ .input = FB_DISP_RGB,
+ },
+ .mode_screen = LCD_SCREEN_SX_N(640) |
+ LCD_SCREEN_SY_N(480),
+ .mode_horztiming = LCD_HORZTIMING_HPW_N(96) |
+ LCD_HORZTIMING_HND1_N(13) | LCD_HORZTIMING_HND2_N(51),
+ .mode_verttiming = LCD_VERTTIMING_VPW_N(2) |
+ LCD_VERTTIMING_VND1_N(11) | LCD_VERTTIMING_VND2_N(32),
+ .mode_clkcontrol = 0x00000000, /* /4=24Mhz */
+ .mode_pwmdiv = 0x8000063f,
+ .mode_pwmhi = 0x03400000,
+ .mode_outmask = 0x00fcfcfc,
+ .mode_fifoctrl = 0x2f2f2f2f,
+ .mode_toyclksrc = 0x00000004, /* AUXPLL directly */
+ .mode_backlight = 0x00000000,
+ .mode_auxpll = 8, /* 96MHz AUXPLL */
+ .device_init = board_au1200fb_panel_init,
+ .device_shutdown = board_au1200fb_panel_shutdown,
+ 640, 480,
+ 640, 480,
+ },
+
+ [7] = { /* Sharp 320x240 TFT */
+ .name = "Sharp_320x240_TFT",
+ .monspecs = {
+ .modedb = NULL,
+ .modedb_len = 0,
+ .hfmin = 12500,
+ .hfmax = 20000,
+ .vfmin = 38,
+ .vfmax = 81,
+ .dclkmin = 4500000,
+ .dclkmax = 6800000,
+ .input = FB_DISP_RGB,
+ },
+ .mode_screen = LCD_SCREEN_SX_N(320) |
+ LCD_SCREEN_SY_N(240),
+ .mode_horztiming = LCD_HORZTIMING_HPW_N(60) |
+ LCD_HORZTIMING_HND1_N(13) | LCD_HORZTIMING_HND2_N(2),
+ .mode_verttiming = LCD_VERTTIMING_VPW_N(2) |
+ LCD_VERTTIMING_VND1_N(2) | LCD_VERTTIMING_VND2_N(5),
+ .mode_clkcontrol = LCD_CLKCONTROL_PCD_N(7), /*16=6Mhz*/
+ .mode_pwmdiv = 0x8000063f,
+ .mode_pwmhi = 0x03400000,
+ .mode_outmask = 0x00fcfcfc,
+ .mode_fifoctrl = 0x2f2f2f2f,
+ .mode_toyclksrc = 0x00000004, /* AUXPLL directly */
+ .mode_backlight = 0x00000000,
+ .mode_auxpll = 8, /* 96MHz AUXPLL */
+ .device_init = board_au1200fb_panel_init,
+ .device_shutdown = board_au1200fb_panel_shutdown,
+ 320, 320,
+ 240, 240,
+ },
+
+ [8] = { /* Toppoly TD070WGCB2 7" 856x480 TFT */
+ .name = "Toppoly_TD070WGCB2",
+ .monspecs = {
+ .modedb = NULL,
+ .modedb_len = 0,
+ .hfmin = 30000,
+ .hfmax = 70000,
+ .vfmin = 60,
+ .vfmax = 60,
+ .dclkmin = 6000000,
+ .dclkmax = 28000000,
+ .input = FB_DISP_RGB,
+ },
+ .mode_screen = LCD_SCREEN_SX_N(856) |
+ LCD_SCREEN_SY_N(480),
+ .mode_horztiming = LCD_HORZTIMING_HND2_N(43) |
+ LCD_HORZTIMING_HND1_N(43) | LCD_HORZTIMING_HPW_N(114),
+ .mode_verttiming = LCD_VERTTIMING_VND2_N(20) |
+ LCD_VERTTIMING_VND1_N(21) | LCD_VERTTIMING_VPW_N(4),
+ .mode_clkcontrol = 0x00020001, /* /4=24Mhz */
+ .mode_pwmdiv = 0x8000063f,
+ .mode_pwmhi = 0x03400000,
+ .mode_outmask = 0x00fcfcfc,
+ .mode_fifoctrl = 0x2f2f2f2f,
+ .mode_toyclksrc = 0x00000004, /* AUXPLL directly */
+ .mode_backlight = 0x00000000,
+ .mode_auxpll = 8, /* 96MHz AUXPLL */
+ .device_init = board_au1200fb_panel_init,
+ .device_shutdown = board_au1200fb_panel_shutdown,
+ 856, 856,
+ 480, 480,
+ },
+};
+
+#define NUM_PANELS (ARRAY_SIZE(known_lcd_panels))
+
+/********************************************************************/
+
+#ifdef CONFIG_PM
+static int set_brightness(unsigned int brightness)
+{
+ unsigned int hi1, divider;
+
+ /* limit brightness pwm duty to >= 30/1600 */
+ if (brightness < 30) {
+ brightness = 30;
+ }
+ divider = (lcd->pwmdiv & 0x3FFFF) + 1;
+ hi1 = (lcd->pwmhi >> 16) + 1;
+ hi1 = (((brightness & 0xFF) + 1) * divider >> 8);
+ lcd->pwmhi &= 0xFFFF;
+ lcd->pwmhi |= (hi1 << 16);
+
+ return brightness;
+}
+#endif /* CONFIG_PM */
+
+static int winbpp (unsigned int winctrl1)
+{
+ int bits = 0;
+
+ /* how many bits are needed for each pixel format */
+ switch (winctrl1 & LCD_WINCTRL1_FRM) {
+ case LCD_WINCTRL1_FRM_1BPP:
+ bits = 1;
+ break;
+ case LCD_WINCTRL1_FRM_2BPP:
+ bits = 2;
+ break;
+ case LCD_WINCTRL1_FRM_4BPP:
+ bits = 4;
+ break;
+ case LCD_WINCTRL1_FRM_8BPP:
+ bits = 8;
+ break;
+ case LCD_WINCTRL1_FRM_12BPP:
+ case LCD_WINCTRL1_FRM_16BPP655:
+ case LCD_WINCTRL1_FRM_16BPP565:
+ case LCD_WINCTRL1_FRM_16BPP556:
+ case LCD_WINCTRL1_FRM_16BPPI1555:
+ case LCD_WINCTRL1_FRM_16BPPI5551:
+ case LCD_WINCTRL1_FRM_16BPPA1555:
+ case LCD_WINCTRL1_FRM_16BPPA5551:
+ bits = 16;
+ break;
+ case LCD_WINCTRL1_FRM_24BPP:
+ case LCD_WINCTRL1_FRM_32BPP:
+ bits = 32;
+ break;
+ }
+
+ return bits;
+}
+
+static int fbinfo2index (struct fb_info *fb_info)
+{
+ int i;
+
+ for (i = 0; i < CONFIG_FB_AU1200_DEVS; ++i) {
+ if (fb_info == (struct fb_info *)(&_au1200fb_devices[i].fb_info))
+ return i;
+ }
+ printk("au1200fb: ERROR: fbinfo2index failed!\n");
+ return -1;
+}
+
+static int au1200_setlocation (struct au1200fb_device *fbdev, int plane,
+ int xpos, int ypos)
+{
+ uint32 winctrl0, winctrl1, winenable, fb_offset = 0;
+ int xsz, ysz;
+
+ /* FIX!!! NOT CHECKING FOR COMPLETE OFFSCREEN YET */
+
+ winctrl0 = lcd->window[plane].winctrl0;
+ winctrl1 = lcd->window[plane].winctrl1;
+ winctrl0 &= (LCD_WINCTRL0_A | LCD_WINCTRL0_AEN);
+ winctrl1 &= ~(LCD_WINCTRL1_SZX | LCD_WINCTRL1_SZY);
+
+ /* Check for off-screen adjustments */
+ xsz = win->w[plane].xres;
+ ysz = win->w[plane].yres;
+ if ((xpos + win->w[plane].xres) > panel->Xres) {
+ /* Off-screen to the right */
+ xsz = panel->Xres - xpos; /* off by 1 ??? */
+ /*printk("off screen right\n");*/
+ }
+
+ if ((ypos + win->w[plane].yres) > panel->Yres) {
+ /* Off-screen to the bottom */
+ ysz = panel->Yres - ypos; /* off by 1 ??? */
+ /*printk("off screen bottom\n");*/
+ }
+
+ if (xpos < 0) {
+ /* Off-screen to the left */
+ xsz = win->w[plane].xres + xpos;
+ fb_offset += (((0 - xpos) * winbpp(lcd->window[plane].winctrl1))/8);
+ xpos = 0;
+ /*printk("off screen left\n");*/
+ }
+
+ if (ypos < 0) {
+ /* Off-screen to the top */
+ ysz = win->w[plane].yres + ypos;
+ /* fixme: fb_offset += ((0-ypos)*fb_pars[plane].line_length); */
+ ypos = 0;
+ /*printk("off screen top\n");*/
+ }
+
+ /* record settings */
+ win->w[plane].xpos = xpos;
+ win->w[plane].ypos = ypos;
+
+ xsz -= 1;
+ ysz -= 1;
+ winctrl0 |= (xpos << 21);
+ winctrl0 |= (ypos << 10);
+ winctrl1 |= (xsz << 11);
+ winctrl1 |= (ysz << 0);
+
+ /* Disable the window while making changes, then restore WINEN */
+ winenable = lcd->winenable & (1 << plane);
+ au_sync();
+ lcd->winenable &= ~(1 << plane);
+ lcd->window[plane].winctrl0 = winctrl0;
+ lcd->window[plane].winctrl1 = winctrl1;
+ lcd->window[plane].winbuf0 =
+ lcd->window[plane].winbuf1 = fbdev->fb_phys;
+ lcd->window[plane].winbufctrl = 0; /* select winbuf0 */
+ lcd->winenable |= winenable;
+ au_sync();
+
+ return 0;
+}
+
+static void au1200_setpanel (struct panel_settings *newpanel)
+{
+ /*
+ * Perform global setup/init of LCD controller
+ */
+ uint32 winenable;
+
+ /* Make sure all windows disabled */
+ winenable = lcd->winenable;
+ lcd->winenable = 0;
+ au_sync();
+ /*
+ * Ensure everything is disabled before reconfiguring
+ */
+ if (lcd->screen & LCD_SCREEN_SEN) {
+ /* Wait for vertical sync period */
+ lcd->intstatus = LCD_INT_SS;
+ while ((lcd->intstatus & LCD_INT_SS) == 0) {
+ au_sync();
+ }
+
+ lcd->screen &= ~LCD_SCREEN_SEN; /*disable the controller*/
+
+ do {
+ lcd->intstatus = lcd->intstatus; /*clear interrupts*/
+ au_sync();
+ /*wait for controller to shut down*/
+ } while ((lcd->intstatus & LCD_INT_SD) == 0);
+
+ /* Call shutdown of current panel (if up) */
+ /* this must occur last, because if an external clock is driving
+ the controller, the clock cannot be turned off before first
+ shutting down the controller.
+ */
+ if (panel->device_shutdown != NULL)
+ panel->device_shutdown();
+ }
+
+ /* Newpanel == NULL indicates a shutdown operation only */
+ if (newpanel == NULL)
+ return;
+
+ panel = newpanel;
+
+ printk("Panel(%s), %dx%d\n", panel->name, panel->Xres, panel->Yres);
+
+ /*
+ * Setup clocking if internal LCD clock source (assumes sys_auxpll valid)
+ */
+ if (!(panel->mode_clkcontrol & LCD_CLKCONTROL_EXT))
+ {
+ uint32 sys_clksrc;
+ au_writel(panel->mode_auxpll, SYS_AUXPLL);
+ sys_clksrc = au_readl(SYS_CLKSRC) & ~0x0000001f;
+ sys_clksrc |= panel->mode_toyclksrc;
+ au_writel(sys_clksrc, SYS_CLKSRC);
+ }
+
+ /*
+ * Configure panel timings
+ */
+ lcd->screen = panel->mode_screen;
+ lcd->horztiming = panel->mode_horztiming;
+ lcd->verttiming = panel->mode_verttiming;
+ lcd->clkcontrol = panel->mode_clkcontrol;
+ lcd->pwmdiv = panel->mode_pwmdiv;
+ lcd->pwmhi = panel->mode_pwmhi;
+ lcd->outmask = panel->mode_outmask;
+ lcd->fifoctrl = panel->mode_fifoctrl;
+ au_sync();
+
+ /* fixme: Check window settings to make sure still valid
+ * for new geometry */
+#if 0
+ au1200_setlocation(fbdev, 0, win->w[0].xpos, win->w[0].ypos);
+ au1200_setlocation(fbdev, 1, win->w[1].xpos, win->w[1].ypos);
+ au1200_setlocation(fbdev, 2, win->w[2].xpos, win->w[2].ypos);
+ au1200_setlocation(fbdev, 3, win->w[3].xpos, win->w[3].ypos);
+#endif
+ lcd->winenable = winenable;
+
+ /*
+ * Re-enable screen now that it is configured
+ */
+ lcd->screen |= LCD_SCREEN_SEN;
+ au_sync();
+
+ /* Call init of panel */
+ if (panel->device_init != NULL) panel->device_init();
+
+ /* FIX!!!! not appropriate on panel change!!! Global setup/init */
+ lcd->intenable = 0;
+ lcd->intstatus = ~0;
+ lcd->backcolor = win->mode_backcolor;
+
+ /* Setup Color Key - FIX!!! */
+ lcd->colorkey = win->mode_colorkey;
+ lcd->colorkeymsk = win->mode_colorkeymsk;
+
+ /* Setup HWCursor - FIX!!! Need to support this eventually */
+ lcd->hwc.cursorctrl = 0;
+ lcd->hwc.cursorpos = 0;
+ lcd->hwc.cursorcolor0 = 0;
+ lcd->hwc.cursorcolor1 = 0;
+ lcd->hwc.cursorcolor2 = 0;
+ lcd->hwc.cursorcolor3 = 0;
+
+
+#if 0
+#define D(X) printk("%25s: %08X\n", #X, X)
+ D(lcd->screen);
+ D(lcd->horztiming);
+ D(lcd->verttiming);
+ D(lcd->clkcontrol);
+ D(lcd->pwmdiv);
+ D(lcd->pwmhi);
+ D(lcd->outmask);
+ D(lcd->fifoctrl);
+ D(lcd->window[0].winctrl0);
+ D(lcd->window[0].winctrl1);
+ D(lcd->window[0].winctrl2);
+ D(lcd->window[0].winbuf0);
+ D(lcd->window[0].winbuf1);
+ D(lcd->window[0].winbufctrl);
+ D(lcd->window[1].winctrl0);
+ D(lcd->window[1].winctrl1);
+ D(lcd->window[1].winctrl2);
+ D(lcd->window[1].winbuf0);
+ D(lcd->window[1].winbuf1);
+ D(lcd->window[1].winbufctrl);
+ D(lcd->window[2].winctrl0);
+ D(lcd->window[2].winctrl1);
+ D(lcd->window[2].winctrl2);
+ D(lcd->window[2].winbuf0);
+ D(lcd->window[2].winbuf1);
+ D(lcd->window[2].winbufctrl);
+ D(lcd->window[3].winctrl0);
+ D(lcd->window[3].winctrl1);
+ D(lcd->window[3].winctrl2);
+ D(lcd->window[3].winbuf0);
+ D(lcd->window[3].winbuf1);
+ D(lcd->window[3].winbufctrl);
+ D(lcd->winenable);
+ D(lcd->intenable);
+ D(lcd->intstatus);
+ D(lcd->backcolor);
+ D(lcd->winenable);
+ D(lcd->colorkey);
+ D(lcd->colorkeymsk);
+ D(lcd->hwc.cursorctrl);
+ D(lcd->hwc.cursorpos);
+ D(lcd->hwc.cursorcolor0);
+ D(lcd->hwc.cursorcolor1);
+ D(lcd->hwc.cursorcolor2);
+ D(lcd->hwc.cursorcolor3);
+#endif
+}
+
+static void au1200_setmode(struct au1200fb_device *fbdev)
+{
+ int plane = fbdev->plane;
+ /* Window/plane setup */
+ lcd->window[plane].winctrl1 = ( 0
+ | LCD_WINCTRL1_PRI_N(plane)
+ | win->w[plane].mode_winctrl1 /* FRM,CCO,PO,PIPE */
+ ) ;
+
+ au1200_setlocation(fbdev, plane, win->w[plane].xpos, win->w[plane].ypos);
+
+ lcd->window[plane].winctrl2 = ( 0
+ | LCD_WINCTRL2_CKMODE_00
+ | LCD_WINCTRL2_DBM
+ | LCD_WINCTRL2_BX_N( fbdev->fb_info.fix.line_length)
+ | LCD_WINCTRL2_SCX_1
+ | LCD_WINCTRL2_SCY_1
+ ) ;
+ lcd->winenable |= win->w[plane].mode_winenable;
+ au_sync();
+}
+
+
+/* Inline helpers */
+
+/*#define panel_is_dual(panel) ((panel->mode_screen & LCD_SCREEN_PT) == LCD_SCREEN_PT_010)*/
+/*#define panel_is_active(panel)((panel->mode_screen & LCD_SCREEN_PT) == LCD_SCREEN_PT_010)*/
+
+#define panel_is_color(panel) ((panel->mode_screen & LCD_SCREEN_PT) <= LCD_SCREEN_PT_CDSTN)
+
+/* Bitfields format supported by the controller. */
+static struct fb_bitfield rgb_bitfields[][4] = {
+ /* Red, Green, Blue, Transp */
+ [LCD_WINCTRL1_FRM_16BPP655 >> 25] =
+ { { 10, 6, 0 }, { 5, 5, 0 }, { 0, 5, 0 }, { 0, 0, 0 } },
+
+ [LCD_WINCTRL1_FRM_16BPP565 >> 25] =
+ { { 11, 5, 0 }, { 5, 6, 0 }, { 0, 5, 0 }, { 0, 0, 0 } },
+
+ [LCD_WINCTRL1_FRM_16BPP556 >> 25] =
+ { { 11, 5, 0 }, { 6, 5, 0 }, { 0, 6, 0 }, { 0, 0, 0 } },
+
+ [LCD_WINCTRL1_FRM_16BPPI1555 >> 25] =
+ { { 10, 5, 0 }, { 5, 5, 0 }, { 0, 5, 0 }, { 0, 0, 0 } },
+
+ [LCD_WINCTRL1_FRM_16BPPI5551 >> 25] =
+ { { 11, 5, 0 }, { 6, 5, 0 }, { 1, 5, 0 }, { 0, 0, 0 } },
+
+ [LCD_WINCTRL1_FRM_16BPPA1555 >> 25] =
+ { { 10, 5, 0 }, { 5, 5, 0 }, { 0, 5, 0 }, { 15, 1, 0 } },
+
+ [LCD_WINCTRL1_FRM_16BPPA5551 >> 25] =
+ { { 11, 5, 0 }, { 6, 5, 0 }, { 1, 5, 0 }, { 0, 1, 0 } },
+
+ [LCD_WINCTRL1_FRM_24BPP >> 25] =
+ { { 16, 8, 0 }, { 8, 8, 0 }, { 0, 8, 0 }, { 0, 0, 0 } },
+
+ [LCD_WINCTRL1_FRM_32BPP >> 25] =
+ { { 16, 8, 0 }, { 8, 8, 0 }, { 0, 8, 0 }, { 24, 0, 0 } },
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* Helpers */
+
+static void au1200fb_update_fbinfo(struct fb_info *fbi)
+{
+ /* FIX!!!! This also needs to take the window pixel format into account!!! */
+
+ /* Update var-dependent FB info */
+ if (panel_is_color(panel)) {
+ if (fbi->var.bits_per_pixel <= 8) {
+ /* palettized */
+ fbi->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+ fbi->fix.line_length = fbi->var.xres_virtual /
+ (8/fbi->var.bits_per_pixel);
+ } else {
+ /* non-palettized */
+ fbi->fix.visual = FB_VISUAL_TRUECOLOR;
+ fbi->fix.line_length = fbi->var.xres_virtual * (fbi->var.bits_per_pixel / 8);
+ }
+ } else {
+ /* mono FIX!!! mono 8 and 4 bits */
+ fbi->fix.visual = FB_VISUAL_MONO10;
+ fbi->fix.line_length = fbi->var.xres_virtual / 8;
+ }
+
+ fbi->screen_size = fbi->fix.line_length * fbi->var.yres_virtual;
+ print_dbg("line length: %d\n", fbi->fix.line_length);
+ print_dbg("bits_per_pixel: %d\n", fbi->var.bits_per_pixel);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* AU1200 framebuffer driver */
+
+/* fb_check_var
+ * Validate var settings with hardware restrictions and modify it if necessary
+ */
+static int au1200fb_fb_check_var(struct fb_var_screeninfo *var,
+ struct fb_info *fbi)
+{
+ struct au1200fb_device *fbdev = (struct au1200fb_device *)fbi;
+ u32 pixclock;
+ int screen_size, plane;
+
+ plane = fbdev->plane;
+
+ /* Make sure that the mode respect all LCD controller and
+ * panel restrictions. */
+ var->xres = win->w[plane].xres;
+ var->yres = win->w[plane].yres;
+
+ /* No need for virtual resolution support */
+ var->xres_virtual = var->xres;
+ var->yres_virtual = var->yres;
+
+ var->bits_per_pixel = winbpp(win->w[plane].mode_winctrl1);
+
+ screen_size = var->xres_virtual * var->yres_virtual;
+ if (var->bits_per_pixel > 8) screen_size *= (var->bits_per_pixel / 8);
+ else screen_size /= (8/var->bits_per_pixel);
+
+ if (fbdev->fb_len < screen_size)
+ return -EINVAL; /* Virtual screen is to big, abort */
+
+ /* FIX!!!! what are the implicaitons of ignoring this for windows ??? */
+ /* The max LCD clock is fixed to 48MHz (value of AUX_CLK). The pixel
+ * clock can only be obtain by dividing this value by an even integer.
+ * Fallback to a slower pixel clock if necessary. */
+ pixclock = max((u32)(PICOS2KHZ(var->pixclock) * 1000), fbi->monspecs.dclkmin);
+ pixclock = min(pixclock, min(fbi->monspecs.dclkmax, (u32)AU1200_LCD_MAX_CLK/2));
+
+ if (AU1200_LCD_MAX_CLK % pixclock) {
+ int diff = AU1200_LCD_MAX_CLK % pixclock;
+ pixclock -= diff;
+ }
+
+ var->pixclock = KHZ2PICOS(pixclock/1000);
+#if 0
+ if (!panel_is_active(panel)) {
+ int pcd = AU1200_LCD_MAX_CLK / (pixclock * 2) - 1;
+
+ if (!panel_is_color(panel)
+ && (panel->control_base & LCD_CONTROL_MPI) && (pcd < 3)) {
+ /* STN 8bit mono panel support is up to 6MHz pixclock */
+ var->pixclock = KHZ2PICOS(6000);
+ } else if (!pcd) {
+ /* Other STN panel support is up to 12MHz */
+ var->pixclock = KHZ2PICOS(12000);
+ }
+ }
+#endif
+ /* Set bitfield accordingly */
+ switch (var->bits_per_pixel) {
+ case 16:
+ {
+ /* 16bpp True color.
+ * These must be set to MATCH WINCTRL[FORM] */
+ int idx;
+ idx = (win->w[0].mode_winctrl1 & LCD_WINCTRL1_FRM) >> 25;
+ var->red = rgb_bitfields[idx][0];
+ var->green = rgb_bitfields[idx][1];
+ var->blue = rgb_bitfields[idx][2];
+ var->transp = rgb_bitfields[idx][3];
+ break;
+ }
+
+ case 32:
+ {
+ /* 32bpp True color.
+ * These must be set to MATCH WINCTRL[FORM] */
+ int idx;
+ idx = (win->w[0].mode_winctrl1 & LCD_WINCTRL1_FRM) >> 25;
+ var->red = rgb_bitfields[idx][0];
+ var->green = rgb_bitfields[idx][1];
+ var->blue = rgb_bitfields[idx][2];
+ var->transp = rgb_bitfields[idx][3];
+ break;
+ }
+ default:
+ print_dbg("Unsupported depth %dbpp", var->bits_per_pixel);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/* fb_set_par
+ * Set hardware with var settings. This will enable the controller with a
+ * specific mode, normally validated with the fb_check_var method
+ */
+static int au1200fb_fb_set_par(struct fb_info *fbi)
+{
+ struct au1200fb_device *fbdev = (struct au1200fb_device *)fbi;
+
+ au1200fb_update_fbinfo(fbi);
+ au1200_setmode(fbdev);
+
+ return 0;
+}
+
+/* fb_setcolreg
+ * Set color in LCD palette.
+ */
+static int au1200fb_fb_setcolreg(unsigned regno, unsigned red, unsigned green,
+ unsigned blue, unsigned transp, struct fb_info *fbi)
+{
+ volatile u32 *palette = lcd->palette;
+ u32 value;
+
+ if (regno > (AU1200_LCD_NBR_PALETTE_ENTRIES - 1))
+ return -EINVAL;
+
+ if (fbi->var.grayscale) {
+ /* Convert color to grayscale */
+ red = green = blue =
+ (19595 * red + 38470 * green + 7471 * blue) >> 16;
+ }
+
+ if (fbi->fix.visual == FB_VISUAL_TRUECOLOR) {
+ /* Place color in the pseudopalette */
+ if (regno > 16)
+ return -EINVAL;
+
+ palette = (u32*) fbi->pseudo_palette;
+
+ red >>= (16 - fbi->var.red.length);
+ green >>= (16 - fbi->var.green.length);
+ blue >>= (16 - fbi->var.blue.length);
+
+ value = (red << fbi->var.red.offset) |
+ (green << fbi->var.green.offset)|
+ (blue << fbi->var.blue.offset);
+ value &= 0xFFFF;
+
+ } else if (1 /*FIX!!! panel_is_active(fbdev->panel)*/) {
+ /* COLOR TFT PALLETTIZED (use RGB 565) */
+ value = (red & 0xF800)|((green >> 5) &
+ 0x07E0)|((blue >> 11) & 0x001F);
+ value &= 0xFFFF;
+
+ } else if (0 /*panel_is_color(fbdev->panel)*/) {
+ /* COLOR STN MODE */
+ value = 0x1234;
+ value &= 0xFFF;
+ } else {
+ /* MONOCHROME MODE */
+ value = (green >> 12) & 0x000F;
+ value &= 0xF;
+ }
+
+ palette[regno] = value;
+
+ return 0;
+}
+
+/* fb_blank
+ * Blank the screen. Depending on the mode, the screen will be
+ * activated with the backlight color, or desactivated
+ */
+static int au1200fb_fb_blank(int blank_mode, struct fb_info *fbi)
+{
+ /* Short-circuit screen blanking */
+ if (noblanking)
+ return 0;
+
+ switch (blank_mode) {
+
+ case FB_BLANK_UNBLANK:
+ case FB_BLANK_NORMAL:
+ /* printk("turn on panel\n"); */
+ au1200_setpanel(panel);
+ break;
+ case FB_BLANK_VSYNC_SUSPEND:
+ case FB_BLANK_HSYNC_SUSPEND:
+ case FB_BLANK_POWERDOWN:
+ /* printk("turn off panel\n"); */
+ au1200_setpanel(NULL);
+ break;
+ default:
+ break;
+
+ }
+
+ /* FB_BLANK_NORMAL is a soft blank */
+ return (blank_mode == FB_BLANK_NORMAL) ? -EINVAL : 0;
+}
+
+/* fb_mmap
+ * Map video memory in user space. We don't use the generic fb_mmap
+ * method mainly to allow the use of the TLB streaming flag (CCA=6)
+ */
+static int au1200fb_fb_mmap(struct fb_info *info, struct vm_area_struct *vma)
+
+{
+ unsigned int len;
+ unsigned long start=0, off;
+ struct au1200fb_device *fbdev = (struct au1200fb_device *) info;
+
+#ifdef CONFIG_PM
+ au1xxx_pm_access(LCD_pm_dev);
+#endif
+
+ if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) {
+ return -EINVAL;
+ }
+
+ start = fbdev->fb_phys & PAGE_MASK;
+ len = PAGE_ALIGN((start & ~PAGE_MASK) + fbdev->fb_len);
+
+ off = vma->vm_pgoff << PAGE_SHIFT;
+
+ if ((vma->vm_end - vma->vm_start + off) > len) {
+ return -EINVAL;
+ }
+
+ off += start;
+ vma->vm_pgoff = off >> PAGE_SHIFT;
+
+ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+ pgprot_val(vma->vm_page_prot) |= _CACHE_MASK; /* CCA=7 */
+
+ vma->vm_flags |= VM_IO;
+
+ return io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
+ vma->vm_end - vma->vm_start,
+ vma->vm_page_prot);
+
+ return 0;
+}
+
+static void set_global(u_int cmd, struct au1200_lcd_global_regs_t *pdata)
+{
+
+ unsigned int hi1, divider;
+
+ /* SCREEN_SIZE: user cannot reset size, must switch panel choice */
+
+ if (pdata->flags & SCREEN_BACKCOLOR)
+ lcd->backcolor = pdata->backcolor;
+
+ if (pdata->flags & SCREEN_BRIGHTNESS) {
+
+ // limit brightness pwm duty to >= 30/1600
+ if (pdata->brightness < 30) {
+ pdata->brightness = 30;
+ }
+ divider = (lcd->pwmdiv & 0x3FFFF) + 1;
+ hi1 = (lcd->pwmhi >> 16) + 1;
+ hi1 = (((pdata->brightness & 0xFF)+1) * divider >> 8);
+ lcd->pwmhi &= 0xFFFF;
+ lcd->pwmhi |= (hi1 << 16);
+ }
+
+ if (pdata->flags & SCREEN_COLORKEY)
+ lcd->colorkey = pdata->colorkey;
+
+ if (pdata->flags & SCREEN_MASK)
+ lcd->colorkeymsk = pdata->mask;
+ au_sync();
+}
+
+static void get_global(u_int cmd, struct au1200_lcd_global_regs_t *pdata)
+{
+ unsigned int hi1, divider;
+
+ pdata->xsize = ((lcd->screen & LCD_SCREEN_SX) >> 19) + 1;
+ pdata->ysize = ((lcd->screen & LCD_SCREEN_SY) >> 8) + 1;
+
+ pdata->backcolor = lcd->backcolor;
+ pdata->colorkey = lcd->colorkey;
+ pdata->mask = lcd->colorkeymsk;
+
+ // brightness
+ hi1 = (lcd->pwmhi >> 16) + 1;
+ divider = (lcd->pwmdiv & 0x3FFFF) + 1;
+ pdata->brightness = ((hi1 << 8) / divider) - 1;
+ au_sync();
+}
+
+static void set_window(unsigned int plane,
+ struct au1200_lcd_window_regs_t *pdata)
+{
+ unsigned int val, bpp;
+
+ /* Window control register 0 */
+ if (pdata->flags & WIN_POSITION) {
+ val = lcd->window[plane].winctrl0 & ~(LCD_WINCTRL0_OX |
+ LCD_WINCTRL0_OY);
+ val |= ((pdata->xpos << 21) & LCD_WINCTRL0_OX);
+ val |= ((pdata->ypos << 10) & LCD_WINCTRL0_OY);
+ lcd->window[plane].winctrl0 = val;
+ }
+ if (pdata->flags & WIN_ALPHA_COLOR) {
+ val = lcd->window[plane].winctrl0 & ~(LCD_WINCTRL0_A);
+ val |= ((pdata->alpha_color << 2) & LCD_WINCTRL0_A);
+ lcd->window[plane].winctrl0 = val;
+ }
+ if (pdata->flags & WIN_ALPHA_MODE) {
+ val = lcd->window[plane].winctrl0 & ~(LCD_WINCTRL0_AEN);
+ val |= ((pdata->alpha_mode << 1) & LCD_WINCTRL0_AEN);
+ lcd->window[plane].winctrl0 = val;
+ }
+
+ /* Window control register 1 */
+ if (pdata->flags & WIN_PRIORITY) {
+ val = lcd->window[plane].winctrl1 & ~(LCD_WINCTRL1_PRI);
+ val |= ((pdata->priority << 30) & LCD_WINCTRL1_PRI);
+ lcd->window[plane].winctrl1 = val;
+ }
+ if (pdata->flags & WIN_CHANNEL) {
+ val = lcd->window[plane].winctrl1 & ~(LCD_WINCTRL1_PIPE);
+ val |= ((pdata->channel << 29) & LCD_WINCTRL1_PIPE);
+ lcd->window[plane].winctrl1 = val;
+ }
+ if (pdata->flags & WIN_BUFFER_FORMAT) {
+ val = lcd->window[plane].winctrl1 & ~(LCD_WINCTRL1_FRM);
+ val |= ((pdata->buffer_format << 25) & LCD_WINCTRL1_FRM);
+ lcd->window[plane].winctrl1 = val;
+ }
+ if (pdata->flags & WIN_COLOR_ORDER) {
+ val = lcd->window[plane].winctrl1 & ~(LCD_WINCTRL1_CCO);
+ val |= ((pdata->color_order << 24) & LCD_WINCTRL1_CCO);
+ lcd->window[plane].winctrl1 = val;
+ }
+ if (pdata->flags & WIN_PIXEL_ORDER) {
+ val = lcd->window[plane].winctrl1 & ~(LCD_WINCTRL1_PO);
+ val |= ((pdata->pixel_order << 22) & LCD_WINCTRL1_PO);
+ lcd->window[plane].winctrl1 = val;
+ }
+ if (pdata->flags & WIN_SIZE) {
+ val = lcd->window[plane].winctrl1 & ~(LCD_WINCTRL1_SZX |
+ LCD_WINCTRL1_SZY);
+ val |= (((pdata->xsize << 11) - 1) & LCD_WINCTRL1_SZX);
+ val |= (((pdata->ysize) - 1) & LCD_WINCTRL1_SZY);
+ lcd->window[plane].winctrl1 = val;
+ /* program buffer line width */
+ bpp = winbpp(val) / 8;
+ val = lcd->window[plane].winctrl2 & ~(LCD_WINCTRL2_BX);
+ val |= (((pdata->xsize * bpp) << 8) & LCD_WINCTRL2_BX);
+ lcd->window[plane].winctrl2 = val;
+ }
+
+ /* Window control register 2 */
+ if (pdata->flags & WIN_COLORKEY_MODE) {
+ val = lcd->window[plane].winctrl2 & ~(LCD_WINCTRL2_CKMODE);
+ val |= ((pdata->colorkey_mode << 24) & LCD_WINCTRL2_CKMODE);
+ lcd->window[plane].winctrl2 = val;
+ }
+ if (pdata->flags & WIN_DOUBLE_BUFFER_MODE) {
+ val = lcd->window[plane].winctrl2 & ~(LCD_WINCTRL2_DBM);
+ val |= ((pdata->double_buffer_mode << 23) & LCD_WINCTRL2_DBM);
+ lcd->window[plane].winctrl2 = val;
+ }
+ if (pdata->flags & WIN_RAM_ARRAY_MODE) {
+ val = lcd->window[plane].winctrl2 & ~(LCD_WINCTRL2_RAM);
+ val |= ((pdata->ram_array_mode << 21) & LCD_WINCTRL2_RAM);
+ lcd->window[plane].winctrl2 = val;
+ }
+
+ /* Buffer line width programmed with WIN_SIZE */
+
+ if (pdata->flags & WIN_BUFFER_SCALE) {
+ val = lcd->window[plane].winctrl2 & ~(LCD_WINCTRL2_SCX |
+ LCD_WINCTRL2_SCY);
+ val |= ((pdata->xsize << 11) & LCD_WINCTRL2_SCX);
+ val |= ((pdata->ysize) & LCD_WINCTRL2_SCY);
+ lcd->window[plane].winctrl2 = val;
+ }
+
+ if (pdata->flags & WIN_ENABLE) {
+ val = lcd->winenable;
+ val &= ~(1<<plane);
+ val |= (pdata->enable & 1) << plane;
+ lcd->winenable = val;
+ }
+ au_sync();
+}
+
+static void get_window(unsigned int plane,
+ struct au1200_lcd_window_regs_t *pdata)
+{
+ /* Window control register 0 */
+ pdata->xpos = (lcd->window[plane].winctrl0 & LCD_WINCTRL0_OX) >> 21;
+ pdata->ypos = (lcd->window[plane].winctrl0 & LCD_WINCTRL0_OY) >> 10;
+ pdata->alpha_color = (lcd->window[plane].winctrl0 & LCD_WINCTRL0_A) >> 2;
+ pdata->alpha_mode = (lcd->window[plane].winctrl0 & LCD_WINCTRL0_AEN) >> 1;
+
+ /* Window control register 1 */
+ pdata->priority = (lcd->window[plane].winctrl1& LCD_WINCTRL1_PRI) >> 30;
+ pdata->channel = (lcd->window[plane].winctrl1 & LCD_WINCTRL1_PIPE) >> 29;
+ pdata->buffer_format = (lcd->window[plane].winctrl1 & LCD_WINCTRL1_FRM) >> 25;
+ pdata->color_order = (lcd->window[plane].winctrl1 & LCD_WINCTRL1_CCO) >> 24;
+ pdata->pixel_order = (lcd->window[plane].winctrl1 & LCD_WINCTRL1_PO) >> 22;
+ pdata->xsize = ((lcd->window[plane].winctrl1 & LCD_WINCTRL1_SZX) >> 11) + 1;
+ pdata->ysize = (lcd->window[plane].winctrl1 & LCD_WINCTRL1_SZY) + 1;
+
+ /* Window control register 2 */
+ pdata->colorkey_mode = (lcd->window[plane].winctrl2 & LCD_WINCTRL2_CKMODE) >> 24;
+ pdata->double_buffer_mode = (lcd->window[plane].winctrl2 & LCD_WINCTRL2_DBM) >> 23;
+ pdata->ram_array_mode = (lcd->window[plane].winctrl2 & LCD_WINCTRL2_RAM) >> 21;
+
+ pdata->enable = (lcd->winenable >> plane) & 1;
+ au_sync();
+}
+
+static int au1200fb_ioctl(struct fb_info *info, unsigned int cmd,
+ unsigned long arg)
+{
+ int plane;
+ int val;
+
+#ifdef CONFIG_PM
+ au1xxx_pm_access(LCD_pm_dev);
+#endif
+
+ plane = fbinfo2index(info);
+ print_dbg("au1200fb: ioctl %d on plane %d\n", cmd, plane);
+
+ if (cmd == AU1200_LCD_FB_IOCTL) {
+ struct au1200_lcd_iodata_t iodata;
+
+ if (copy_from_user(&iodata, (void __user *) arg, sizeof(iodata)))
+ return -EFAULT;
+
+ print_dbg("FB IOCTL called\n");
+
+ switch (iodata.subcmd) {
+ case AU1200_LCD_SET_SCREEN:
+ print_dbg("AU1200_LCD_SET_SCREEN\n");
+ set_global(cmd, &iodata.global);
+ break;
+
+ case AU1200_LCD_GET_SCREEN:
+ print_dbg("AU1200_LCD_GET_SCREEN\n");
+ get_global(cmd, &iodata.global);
+ break;
+
+ case AU1200_LCD_SET_WINDOW:
+ print_dbg("AU1200_LCD_SET_WINDOW\n");
+ set_window(plane, &iodata.window);
+ break;
+
+ case AU1200_LCD_GET_WINDOW:
+ print_dbg("AU1200_LCD_GET_WINDOW\n");
+ get_window(plane, &iodata.window);
+ break;
+
+ case AU1200_LCD_SET_PANEL:
+ print_dbg("AU1200_LCD_SET_PANEL\n");
+ if ((iodata.global.panel_choice >= 0) &&
+ (iodata.global.panel_choice <
+ NUM_PANELS))
+ {
+ struct panel_settings *newpanel;
+ panel_index = iodata.global.panel_choice;
+ newpanel = &known_lcd_panels[panel_index];
+ au1200_setpanel(newpanel);
+ }
+ break;
+
+ case AU1200_LCD_GET_PANEL:
+ print_dbg("AU1200_LCD_GET_PANEL\n");
+ iodata.global.panel_choice = panel_index;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ val = copy_to_user((void __user *) arg, &iodata, sizeof(iodata));
+ if (val) {
+ print_dbg("error: could not copy %d bytes\n", val);
+ return -EFAULT;
+ }
+ }
+
+ return 0;
+}
+
+
+static struct fb_ops au1200fb_fb_ops = {
+ .owner = THIS_MODULE,
+ .fb_check_var = au1200fb_fb_check_var,
+ .fb_set_par = au1200fb_fb_set_par,
+ .fb_setcolreg = au1200fb_fb_setcolreg,
+ .fb_blank = au1200fb_fb_blank,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+ .fb_sync = NULL,
+ .fb_ioctl = au1200fb_ioctl,
+ .fb_mmap = au1200fb_fb_mmap,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static irqreturn_t au1200fb_handle_irq(int irq, void* dev_id, struct pt_regs *regs)
+{
+ /* Nothing to do for now, just clear any pending interrupt */
+ lcd->intstatus = lcd->intstatus;
+ au_sync();
+
+ return IRQ_HANDLED;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* AU1200 LCD device probe helpers */
+
+static int au1200fb_init_fbinfo(struct au1200fb_device *fbdev)
+{
+ struct fb_info *fbi = &fbdev->fb_info;
+ int bpp;
+
+ memset(fbi, 0, sizeof(struct fb_info));
+ fbi->fbops = &au1200fb_fb_ops;
+
+ bpp = winbpp(win->w[fbdev->plane].mode_winctrl1);
+
+ /* Copy monitor specs from panel data */
+ /* fixme: we're setting up LCD controller windows, so these dont give a
+ damn as to what the monitor specs are (the panel itself does, but that
+ isnt done here...so maybe need a generic catchall monitor setting??? */
+ memcpy(&fbi->monspecs, &panel->monspecs, sizeof(struct fb_monspecs));
+
+ /* We first try the user mode passed in argument. If that failed,
+ * or if no one has been specified, we default to the first mode of the
+ * panel list. Note that after this call, var data will be set */
+ if (!fb_find_mode(&fbi->var,
+ fbi,
+ NULL, /* drv_info.opt_mode, */
+ fbi->monspecs.modedb,
+ fbi->monspecs.modedb_len,
+ fbi->monspecs.modedb,
+ bpp)) {
+
+ print_err("Cannot find valid mode for panel %s", panel->name);
+ return -EFAULT;
+ }
+
+ fbi->pseudo_palette = kmalloc(sizeof(u32) * 16, GFP_KERNEL);
+ if (!fbi->pseudo_palette) {
+ return -ENOMEM;
+ }
+ memset(fbi->pseudo_palette, 0, sizeof(u32) * 16);
+
+ if (fb_alloc_cmap(&fbi->cmap, AU1200_LCD_NBR_PALETTE_ENTRIES, 0) < 0) {
+ print_err("Fail to allocate colormap (%d entries)",
+ AU1200_LCD_NBR_PALETTE_ENTRIES);
+ kfree(fbi->pseudo_palette);
+ return -EFAULT;
+ }
+
+ strncpy(fbi->fix.id, "AU1200", sizeof(fbi->fix.id));
+ fbi->fix.smem_start = fbdev->fb_phys;
+ fbi->fix.smem_len = fbdev->fb_len;
+ fbi->fix.type = FB_TYPE_PACKED_PIXELS;
+ fbi->fix.xpanstep = 0;
+ fbi->fix.ypanstep = 0;
+ fbi->fix.mmio_start = 0;
+ fbi->fix.mmio_len = 0;
+ fbi->fix.accel = FB_ACCEL_NONE;
+
+ fbi->screen_base = (char __iomem *) fbdev->fb_mem;
+
+ au1200fb_update_fbinfo(fbi);
+
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* AU1200 LCD controller device driver */
+
+static int au1200fb_drv_probe(struct device *dev)
+{
+ struct au1200fb_device *fbdev;
+ unsigned long page;
+ int bpp, plane, ret;
+
+ if (!dev)
+ return -EINVAL;
+
+ for (plane = 0; plane < CONFIG_FB_AU1200_DEVS; ++plane) {
+ bpp = winbpp(win->w[plane].mode_winctrl1);
+ if (win->w[plane].xres == 0)
+ win->w[plane].xres = panel->Xres;
+ if (win->w[plane].yres == 0)
+ win->w[plane].yres = panel->Yres;
+
+ fbdev = &_au1200fb_devices[plane];
+ memset(fbdev, 0, sizeof(struct au1200fb_device));
+ fbdev->plane = plane;
+
+ /* Allocate the framebuffer to the maximum screen size */
+ fbdev->fb_len = (win->w[plane].xres * win->w[plane].yres * bpp) / 8;
+
+ fbdev->fb_mem = dma_alloc_noncoherent(dev,
+ PAGE_ALIGN(fbdev->fb_len),
+ &fbdev->fb_phys, GFP_KERNEL);
+ if (!fbdev->fb_mem) {
+ print_err("fail to allocate frambuffer (size: %dK))",
+ fbdev->fb_len / 1024);
+ return -ENOMEM;
+ }
+
+ /*
+ * Set page reserved so that mmap will work. This is necessary
+ * since we'll be remapping normal memory.
+ */
+ for (page = (unsigned long)fbdev->fb_phys;
+ page < PAGE_ALIGN((unsigned long)fbdev->fb_phys +
+ fbdev->fb_len);
+ page += PAGE_SIZE) {
+ SetPageReserved(pfn_to_page(page >> PAGE_SHIFT)); /* LCD DMA is NOT coherent on Au1200 */
+ }
+ print_dbg("Framebuffer memory map at %p", fbdev->fb_mem);
+ print_dbg("phys=0x%08x, size=%dK", fbdev->fb_phys, fbdev->fb_len / 1024);
+
+ /* Init FB data */
+ if ((ret = au1200fb_init_fbinfo(fbdev)) < 0)
+ goto failed;
+
+ /* Register new framebuffer */
+ if ((ret = register_framebuffer(&fbdev->fb_info)) < 0) {
+ print_err("cannot register new framebuffer");
+ goto failed;
+ }
+
+ au1200fb_fb_set_par(&fbdev->fb_info);
+
+#if !defined(CONFIG_FRAMEBUFFER_CONSOLE) && defined(CONFIG_LOGO)
+ if (plane == 0)
+ if (fb_prepare_logo(&fbdev->fb_info, FB_ROTATE_UR)) {
+ /* Start display and show logo on boot */
+ fb_set_cmap(&fbdev->fb_info.cmap,
+ &fbdev->fb_info);
+
+ fb_show_logo(&fbdev->fb_info, FB_ROTATE_UR);
+ }
+#endif
+ }
+
+ /* Now hook interrupt too */
+ if ((ret = request_irq(AU1200_LCD_INT, au1200fb_handle_irq,
+ SA_INTERRUPT | SA_SHIRQ, "lcd", (void *)dev)) < 0) {
+ print_err("fail to request interrupt line %d (err: %d)",
+ AU1200_LCD_INT, ret);
+ goto failed;
+ }
+
+ return 0;
+
+failed:
+ /* NOTE: This only does the current plane/window that failed; others are still active */
+ if (fbdev->fb_mem)
+ dma_free_noncoherent(dev, PAGE_ALIGN(fbdev->fb_len),
+ fbdev->fb_mem, fbdev->fb_phys);
+ if (fbdev->fb_info.cmap.len != 0)
+ fb_dealloc_cmap(&fbdev->fb_info.cmap);
+ if (fbdev->fb_info.pseudo_palette)
+ kfree(fbdev->fb_info.pseudo_palette);
+ if (plane == 0)
+ free_irq(AU1200_LCD_INT, (void*)dev);
+ return ret;
+}
+
+static int au1200fb_drv_remove(struct device *dev)
+{
+ struct au1200fb_device *fbdev;
+ int plane;
+
+ if (!dev)
+ return -ENODEV;
+
+ /* Turn off the panel */
+ au1200_setpanel(NULL);
+
+ for (plane = 0; plane < CONFIG_FB_AU1200_DEVS; ++plane)
+ {
+ fbdev = &_au1200fb_devices[plane];
+
+ /* Clean up all probe data */
+ unregister_framebuffer(&fbdev->fb_info);
+ if (fbdev->fb_mem)
+ dma_free_noncoherent(dev, PAGE_ALIGN(fbdev->fb_len),
+ fbdev->fb_mem, fbdev->fb_phys);
+ if (fbdev->fb_info.cmap.len != 0)
+ fb_dealloc_cmap(&fbdev->fb_info.cmap);
+ if (fbdev->fb_info.pseudo_palette)
+ kfree(fbdev->fb_info.pseudo_palette);
+ }
+
+ free_irq(AU1200_LCD_INT, (void *)dev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int au1200fb_drv_suspend(struct device *dev, u32 state, u32 level)
+{
+ /* TODO */
+ return 0;
+}
+
+static int au1200fb_drv_resume(struct device *dev, u32 level)
+{
+ /* TODO */
+ return 0;
+}
+#endif /* CONFIG_PM */
+
+static struct device_driver au1200fb_driver = {
+ .name = "au1200-lcd",
+ .bus = &platform_bus_type,
+ .probe = au1200fb_drv_probe,
+ .remove = au1200fb_drv_remove,
+#ifdef CONFIG_PM
+ .suspend = au1200fb_drv_suspend,
+ .resume = au1200fb_drv_resume,
+#endif
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* Kernel driver */
+
+static void au1200fb_setup(void)
+{
+ char* options = NULL;
+ char* this_opt;
+ int num_panels = ARRAY_SIZE(known_lcd_panels);
+ int panel_idx = -1;
+
+ fb_get_options(DRIVER_NAME, &options);
+
+ if (options) {
+ while ((this_opt = strsep(&options,",")) != NULL) {
+ /* Panel option - can be panel name,
+ * "bs" for board-switch, or number/index */
+ if (!strncmp(this_opt, "panel:", 6)) {
+ int i;
+ long int li;
+ char *endptr;
+ this_opt += 6;
+ /* First check for index, which allows
+ * to short circuit this mess */
+ li = simple_strtol(this_opt, &endptr, 0);
+ if (*endptr == '\0') {
+ panel_idx = (int)li;
+ }
+ else if (strcmp(this_opt, "bs") == 0) {
+ extern int board_au1200fb_panel(void);
+ panel_idx = board_au1200fb_panel();
+ }
+
+ else
+ for (i = 0; i < num_panels; i++) {
+ if (!strcmp(this_opt, known_lcd_panels[i].name)) {
+ panel_idx = i;
+ break;
+ }
+ }
+
+ if ((panel_idx < 0) || (panel_idx >= num_panels)) {
+ print_warn("Panel %s not supported!", this_opt);
+ }
+ else
+ panel_index = panel_idx;
+ }
+
+ else if (strncmp(this_opt, "nohwcursor", 10) == 0) {
+ nohwcursor = 1;
+ }
+
+ /* Unsupported option */
+ else {
+ print_warn("Unsupported option \"%s\"", this_opt);
+ }
+ }
+ }
+}
+
+#ifdef CONFIG_PM
+static int au1200fb_pm_callback(au1xxx_power_dev_t *dev,
+ au1xxx_request_t request, void *data) {
+ int retval = -1;
+ unsigned int d = 0;
+ unsigned int brightness = 0;
+
+ if (request == AU1XXX_PM_SLEEP) {
+ board_au1200fb_panel_shutdown();
+ }
+ else if (request == AU1XXX_PM_WAKEUP) {
+ if(dev->prev_state == SLEEP_STATE)
+ {
+ int plane;
+ au1200_setpanel(panel);
+ for (plane = 0; plane < CONFIG_FB_AU1200_DEVS; ++plane) {
+ struct au1200fb_device *fbdev;
+ fbdev = &_au1200fb_devices[plane];
+ au1200fb_fb_set_par(&fbdev->fb_info);
+ }
+ }
+
+ d = *((unsigned int*)data);
+ if(d <=10) brightness = 26;
+ else if(d<=20) brightness = 51;
+ else if(d<=30) brightness = 77;
+ else if(d<=40) brightness = 102;
+ else if(d<=50) brightness = 128;
+ else if(d<=60) brightness = 153;
+ else if(d<=70) brightness = 179;
+ else if(d<=80) brightness = 204;
+ else if(d<=90) brightness = 230;
+ else brightness = 255;
+ set_brightness(brightness);
+ } else if (request == AU1XXX_PM_GETSTATUS) {
+ return dev->cur_state;
+ } else if (request == AU1XXX_PM_ACCESS) {
+ if (dev->cur_state != SLEEP_STATE)
+ return retval;
+ else {
+ au1200_setpanel(panel);
+ }
+ } else if (request == AU1XXX_PM_IDLE) {
+ } else if (request == AU1XXX_PM_CLEANUP) {
+ }
+
+ return retval;
+}
+#endif
+
+static int __init au1200fb_init(void)
+{
+ print_info("" DRIVER_DESC "");
+
+ /* Setup driver with options */
+ au1200fb_setup();
+
+ /* Point to the panel selected */
+ panel = &known_lcd_panels[panel_index];
+ win = &windows[window_index];
+
+ printk(DRIVER_NAME ": Panel %d %s\n", panel_index, panel->name);
+ printk(DRIVER_NAME ": Win %d %s\n", window_index, win->name);
+
+ /* Kickstart the panel, the framebuffers/windows come soon enough */
+ au1200_setpanel(panel);
+
+ #ifdef CONFIG_PM
+ LCD_pm_dev = new_au1xxx_power_device("LCD", &au1200fb_pm_callback, NULL);
+ if ( LCD_pm_dev == NULL)
+ printk(KERN_INFO "Unable to create a power management device entry for the au1200fb.\n");
+ else
+ printk(KERN_INFO "Power management device entry for the au1200fb loaded.\n");
+ #endif
+
+ return driver_register(&au1200fb_driver);
+}
+
+static void __exit au1200fb_cleanup(void)
+{
+ driver_unregister(&au1200fb_driver);
+}
+
+module_init(au1200fb_init);
+module_exit(au1200fb_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/au1200fb.h b/drivers/video/au1200fb.h
new file mode 100644
index 0000000..e267271
--- /dev/null
+++ b/drivers/video/au1200fb.h
@@ -0,0 +1,572 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ * Hardware definitions for the Au1200 LCD controller
+ *
+ * Copyright 2004 AMD
+ * Author: AMD
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _AU1200LCD_H
+#define _AU1200LCD_H
+
+/********************************************************************/
+#define AU1200_LCD_ADDR 0xB5000000
+
+#define uint8 unsigned char
+#define uint32 unsigned int
+
+struct au1200_lcd {
+ volatile uint32 reserved0;
+ volatile uint32 screen;
+ volatile uint32 backcolor;
+ volatile uint32 horztiming;
+ volatile uint32 verttiming;
+ volatile uint32 clkcontrol;
+ volatile uint32 pwmdiv;
+ volatile uint32 pwmhi;
+ volatile uint32 reserved1;
+ volatile uint32 winenable;
+ volatile uint32 colorkey;
+ volatile uint32 colorkeymsk;
+ struct
+ {
+ volatile uint32 cursorctrl;
+ volatile uint32 cursorpos;
+ volatile uint32 cursorcolor0;
+ volatile uint32 cursorcolor1;
+ volatile uint32 cursorcolor2;
+ uint32 cursorcolor3;
+ } hwc;
+ volatile uint32 intstatus;
+ volatile uint32 intenable;
+ volatile uint32 outmask;
+ volatile uint32 fifoctrl;
+ uint32 reserved2[(0x0100-0x0058)/4];
+ struct
+ {
+ volatile uint32 winctrl0;
+ volatile uint32 winctrl1;
+ volatile uint32 winctrl2;
+ volatile uint32 winbuf0;
+ volatile uint32 winbuf1;
+ volatile uint32 winbufctrl;
+ uint32 winreserved0;
+ uint32 winreserved1;
+ } window[4];
+
+ uint32 reserved3[(0x0400-0x0180)/4];
+
+ volatile uint32 palette[(0x0800-0x0400)/4];
+
+ volatile uint8 cursorpattern[256];
+};
+
+/* lcd_screen */
+#define LCD_SCREEN_SEN (1<<31)
+#define LCD_SCREEN_SX (0x07FF<<19)
+#define LCD_SCREEN_SY (0x07FF<< 8)
+#define LCD_SCREEN_SWP (1<<7)
+#define LCD_SCREEN_SWD (1<<6)
+#define LCD_SCREEN_PT (7<<0)
+#define LCD_SCREEN_PT_TFT (0<<0)
+#define LCD_SCREEN_SX_N(WIDTH) ((WIDTH-1)<<19)
+#define LCD_SCREEN_SY_N(HEIGHT) ((HEIGHT-1)<<8)
+#define LCD_SCREEN_PT_CSTN (1<<0)
+#define LCD_SCREEN_PT_CDSTN (2<<0)
+#define LCD_SCREEN_PT_M8STN (3<<0)
+#define LCD_SCREEN_PT_M4STN (4<<0)
+
+/* lcd_backcolor */
+#define LCD_BACKCOLOR_SBGR (0xFF<<16)
+#define LCD_BACKCOLOR_SBGG (0xFF<<8)
+#define LCD_BACKCOLOR_SBGB (0xFF<<0)
+#define LCD_BACKCOLOR_SBGR_N(N) ((N)<<16)
+#define LCD_BACKCOLOR_SBGG_N(N) ((N)<<8)
+#define LCD_BACKCOLOR_SBGB_N(N) ((N)<<0)
+
+/* lcd_winenable */
+#define LCD_WINENABLE_WEN3 (1<<3)
+#define LCD_WINENABLE_WEN2 (1<<2)
+#define LCD_WINENABLE_WEN1 (1<<1)
+#define LCD_WINENABLE_WEN0 (1<<0)
+
+/* lcd_colorkey */
+#define LCD_COLORKEY_CKR (0xFF<<16)
+#define LCD_COLORKEY_CKG (0xFF<<8)
+#define LCD_COLORKEY_CKB (0xFF<<0)
+#define LCD_COLORKEY_CKR_N(N) ((N)<<16)
+#define LCD_COLORKEY_CKG_N(N) ((N)<<8)
+#define LCD_COLORKEY_CKB_N(N) ((N)<<0)
+
+/* lcd_colorkeymsk */
+#define LCD_COLORKEYMSK_CKMR (0xFF<<16)
+#define LCD_COLORKEYMSK_CKMG (0xFF<<8)
+#define LCD_COLORKEYMSK_CKMB (0xFF<<0)
+#define LCD_COLORKEYMSK_CKMR_N(N) ((N)<<16)
+#define LCD_COLORKEYMSK_CKMG_N(N) ((N)<<8)
+#define LCD_COLORKEYMSK_CKMB_N(N) ((N)<<0)
+
+/* lcd windows control 0 */
+#define LCD_WINCTRL0_OX (0x07FF<<21)
+#define LCD_WINCTRL0_OY (0x07FF<<10)
+#define LCD_WINCTRL0_A (0x00FF<<2)
+#define LCD_WINCTRL0_AEN (1<<1)
+#define LCD_WINCTRL0_OX_N(N) ((N)<<21)
+#define LCD_WINCTRL0_OY_N(N) ((N)<<10)
+#define LCD_WINCTRL0_A_N(N) ((N)<<2)
+
+/* lcd windows control 1 */
+#define LCD_WINCTRL1_PRI (3<<30)
+#define LCD_WINCTRL1_PIPE (1<<29)
+#define LCD_WINCTRL1_FRM (0xF<<25)
+#define LCD_WINCTRL1_CCO (1<<24)
+#define LCD_WINCTRL1_PO (3<<22)
+#define LCD_WINCTRL1_SZX (0x07FF<<11)
+#define LCD_WINCTRL1_SZY (0x07FF<<0)
+#define LCD_WINCTRL1_FRM_1BPP (0<<25)
+#define LCD_WINCTRL1_FRM_2BPP (1<<25)
+#define LCD_WINCTRL1_FRM_4BPP (2<<25)
+#define LCD_WINCTRL1_FRM_8BPP (3<<25)
+#define LCD_WINCTRL1_FRM_12BPP (4<<25)
+#define LCD_WINCTRL1_FRM_16BPP655 (5<<25)
+#define LCD_WINCTRL1_FRM_16BPP565 (6<<25)
+#define LCD_WINCTRL1_FRM_16BPP556 (7<<25)
+#define LCD_WINCTRL1_FRM_16BPPI1555 (8<<25)
+#define LCD_WINCTRL1_FRM_16BPPI5551 (9<<25)
+#define LCD_WINCTRL1_FRM_16BPPA1555 (10<<25)
+#define LCD_WINCTRL1_FRM_16BPPA5551 (11<<25)
+#define LCD_WINCTRL1_FRM_24BPP (12<<25)
+#define LCD_WINCTRL1_FRM_32BPP (13<<25)
+#define LCD_WINCTRL1_PRI_N(N) ((N)<<30)
+#define LCD_WINCTRL1_PO_00 (0<<22)
+#define LCD_WINCTRL1_PO_01 (1<<22)
+#define LCD_WINCTRL1_PO_10 (2<<22)
+#define LCD_WINCTRL1_PO_11 (3<<22)
+#define LCD_WINCTRL1_SZX_N(N) ((N-1)<<11)
+#define LCD_WINCTRL1_SZY_N(N) ((N-1)<<0)
+
+/* lcd windows control 2 */
+#define LCD_WINCTRL2_CKMODE (3<<24)
+#define LCD_WINCTRL2_DBM (1<<23)
+#define LCD_WINCTRL2_RAM (3<<21)
+#define LCD_WINCTRL2_BX (0x1FFF<<8)
+#define LCD_WINCTRL2_SCX (0xF<<4)
+#define LCD_WINCTRL2_SCY (0xF<<0)
+#define LCD_WINCTRL2_CKMODE_00 (0<<24)
+#define LCD_WINCTRL2_CKMODE_01 (1<<24)
+#define LCD_WINCTRL2_CKMODE_10 (2<<24)
+#define LCD_WINCTRL2_CKMODE_11 (3<<24)
+#define LCD_WINCTRL2_RAM_NONE (0<<21)
+#define LCD_WINCTRL2_RAM_PALETTE (1<<21)
+#define LCD_WINCTRL2_RAM_GAMMA (2<<21)
+#define LCD_WINCTRL2_RAM_BUFFER (3<<21)
+#define LCD_WINCTRL2_BX_N(N) ((N)<<8)
+#define LCD_WINCTRL2_SCX_1 (0<<4)
+#define LCD_WINCTRL2_SCX_2 (1<<4)
+#define LCD_WINCTRL2_SCX_4 (2<<4)
+#define LCD_WINCTRL2_SCY_1 (0<<0)
+#define LCD_WINCTRL2_SCY_2 (1<<0)
+#define LCD_WINCTRL2_SCY_4 (2<<0)
+
+/* lcd windows buffer control */
+#define LCD_WINBUFCTRL_DB (1<<1)
+#define LCD_WINBUFCTRL_DBN (1<<0)
+
+/* lcd_intstatus, lcd_intenable */
+#define LCD_INT_IFO (0xF<<14)
+#define LCD_INT_IFU (0xF<<10)
+#define LCD_INT_OFO (1<<9)
+#define LCD_INT_OFU (1<<8)
+#define LCD_INT_WAIT (1<<3)
+#define LCD_INT_SD (1<<2)
+#define LCD_INT_SA (1<<1)
+#define LCD_INT_SS (1<<0)
+
+/* lcd_horztiming */
+#define LCD_HORZTIMING_HND2 (0x1FF<<18)
+#define LCD_HORZTIMING_HND1 (0x1FF<<9)
+#define LCD_HORZTIMING_HPW (0x1FF<<0)
+#define LCD_HORZTIMING_HND2_N(N)(((N)-1)<<18)
+#define LCD_HORZTIMING_HND1_N(N)(((N)-1)<<9)
+#define LCD_HORZTIMING_HPW_N(N) (((N)-1)<<0)
+
+/* lcd_verttiming */
+#define LCD_VERTTIMING_VND2 (0x1FF<<18)
+#define LCD_VERTTIMING_VND1 (0x1FF<<9)
+#define LCD_VERTTIMING_VPW (0x1FF<<0)
+#define LCD_VERTTIMING_VND2_N(N)(((N)-1)<<18)
+#define LCD_VERTTIMING_VND1_N(N)(((N)-1)<<9)
+#define LCD_VERTTIMING_VPW_N(N) (((N)-1)<<0)
+
+/* lcd_clkcontrol */
+#define LCD_CLKCONTROL_EXT (1<<22)
+#define LCD_CLKCONTROL_DELAY (3<<20)
+#define LCD_CLKCONTROL_CDD (1<<19)
+#define LCD_CLKCONTROL_IB (1<<18)
+#define LCD_CLKCONTROL_IC (1<<17)
+#define LCD_CLKCONTROL_IH (1<<16)
+#define LCD_CLKCONTROL_IV (1<<15)
+#define LCD_CLKCONTROL_BF (0x1F<<10)
+#define LCD_CLKCONTROL_PCD (0x3FF<<0)
+#define LCD_CLKCONTROL_BF_N(N) (((N)-1)<<10)
+#define LCD_CLKCONTROL_PCD_N(N) ((N)<<0)
+
+/* lcd_pwmdiv */
+#define LCD_PWMDIV_EN (1<<31)
+#define LCD_PWMDIV_PWMDIV (0x1FFFF<<0)
+#define LCD_PWMDIV_PWMDIV_N(N) ((N)<<0)
+
+/* lcd_pwmhi */
+#define LCD_PWMHI_PWMHI1 (0xFFFF<<16)
+#define LCD_PWMHI_PWMHI0 (0xFFFF<<0)
+#define LCD_PWMHI_PWMHI1_N(N) ((N)<<16)
+#define LCD_PWMHI_PWMHI0_N(N) ((N)<<0)
+
+/* lcd_hwccon */
+#define LCD_HWCCON_EN (1<<0)
+
+/* lcd_cursorpos */
+#define LCD_CURSORPOS_HWCXOFF (0x1F<<27)
+#define LCD_CURSORPOS_HWCXPOS (0x07FF<<16)
+#define LCD_CURSORPOS_HWCYOFF (0x1F<<11)
+#define LCD_CURSORPOS_HWCYPOS (0x07FF<<0)
+#define LCD_CURSORPOS_HWCXOFF_N(N) ((N)<<27)
+#define LCD_CURSORPOS_HWCXPOS_N(N) ((N)<<16)
+#define LCD_CURSORPOS_HWCYOFF_N(N) ((N)<<11)
+#define LCD_CURSORPOS_HWCYPOS_N(N) ((N)<<0)
+
+/* lcd_cursorcolor */
+#define LCD_CURSORCOLOR_HWCA (0xFF<<24)
+#define LCD_CURSORCOLOR_HWCR (0xFF<<16)
+#define LCD_CURSORCOLOR_HWCG (0xFF<<8)
+#define LCD_CURSORCOLOR_HWCB (0xFF<<0)
+#define LCD_CURSORCOLOR_HWCA_N(N) ((N)<<24)
+#define LCD_CURSORCOLOR_HWCR_N(N) ((N)<<16)
+#define LCD_CURSORCOLOR_HWCG_N(N) ((N)<<8)
+#define LCD_CURSORCOLOR_HWCB_N(N) ((N)<<0)
+
+/* lcd_fifoctrl */
+#define LCD_FIFOCTRL_F3IF (1<<29)
+#define LCD_FIFOCTRL_F3REQ (0x1F<<24)
+#define LCD_FIFOCTRL_F2IF (1<<29)
+#define LCD_FIFOCTRL_F2REQ (0x1F<<16)
+#define LCD_FIFOCTRL_F1IF (1<<29)
+#define LCD_FIFOCTRL_F1REQ (0x1F<<8)
+#define LCD_FIFOCTRL_F0IF (1<<29)
+#define LCD_FIFOCTRL_F0REQ (0x1F<<0)
+#define LCD_FIFOCTRL_F3REQ_N(N) ((N-1)<<24)
+#define LCD_FIFOCTRL_F2REQ_N(N) ((N-1)<<16)
+#define LCD_FIFOCTRL_F1REQ_N(N) ((N-1)<<8)
+#define LCD_FIFOCTRL_F0REQ_N(N) ((N-1)<<0)
+
+/* lcd_outmask */
+#define LCD_OUTMASK_MASK (0x00FFFFFF)
+
+/********************************************************************/
+#endif /* _AU1200LCD_H */
+/*
+ * BRIEF MODULE DESCRIPTION
+ * Hardware definitions for the Au1200 LCD controller
+ *
+ * Copyright 2004 AMD
+ * Author: AMD
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _AU1200LCD_H
+#define _AU1200LCD_H
+
+/********************************************************************/
+#define AU1200_LCD_ADDR 0xB5000000
+
+#define uint8 unsigned char
+#define uint32 unsigned int
+
+struct au1200_lcd {
+ volatile uint32 reserved0;
+ volatile uint32 screen;
+ volatile uint32 backcolor;
+ volatile uint32 horztiming;
+ volatile uint32 verttiming;
+ volatile uint32 clkcontrol;
+ volatile uint32 pwmdiv;
+ volatile uint32 pwmhi;
+ volatile uint32 reserved1;
+ volatile uint32 winenable;
+ volatile uint32 colorkey;
+ volatile uint32 colorkeymsk;
+ struct
+ {
+ volatile uint32 cursorctrl;
+ volatile uint32 cursorpos;
+ volatile uint32 cursorcolor0;
+ volatile uint32 cursorcolor1;
+ volatile uint32 cursorcolor2;
+ uint32 cursorcolor3;
+ } hwc;
+ volatile uint32 intstatus;
+ volatile uint32 intenable;
+ volatile uint32 outmask;
+ volatile uint32 fifoctrl;
+ uint32 reserved2[(0x0100-0x0058)/4];
+ struct
+ {
+ volatile uint32 winctrl0;
+ volatile uint32 winctrl1;
+ volatile uint32 winctrl2;
+ volatile uint32 winbuf0;
+ volatile uint32 winbuf1;
+ volatile uint32 winbufctrl;
+ uint32 winreserved0;
+ uint32 winreserved1;
+ } window[4];
+
+ uint32 reserved3[(0x0400-0x0180)/4];
+
+ volatile uint32 palette[(0x0800-0x0400)/4];
+
+ volatile uint8 cursorpattern[256];
+};
+
+/* lcd_screen */
+#define LCD_SCREEN_SEN (1<<31)
+#define LCD_SCREEN_SX (0x07FF<<19)
+#define LCD_SCREEN_SY (0x07FF<< 8)
+#define LCD_SCREEN_SWP (1<<7)
+#define LCD_SCREEN_SWD (1<<6)
+#define LCD_SCREEN_PT (7<<0)
+#define LCD_SCREEN_PT_TFT (0<<0)
+#define LCD_SCREEN_SX_N(WIDTH) ((WIDTH-1)<<19)
+#define LCD_SCREEN_SY_N(HEIGHT) ((HEIGHT-1)<<8)
+#define LCD_SCREEN_PT_CSTN (1<<0)
+#define LCD_SCREEN_PT_CDSTN (2<<0)
+#define LCD_SCREEN_PT_M8STN (3<<0)
+#define LCD_SCREEN_PT_M4STN (4<<0)
+
+/* lcd_backcolor */
+#define LCD_BACKCOLOR_SBGR (0xFF<<16)
+#define LCD_BACKCOLOR_SBGG (0xFF<<8)
+#define LCD_BACKCOLOR_SBGB (0xFF<<0)
+#define LCD_BACKCOLOR_SBGR_N(N) ((N)<<16)
+#define LCD_BACKCOLOR_SBGG_N(N) ((N)<<8)
+#define LCD_BACKCOLOR_SBGB_N(N) ((N)<<0)
+
+/* lcd_winenable */
+#define LCD_WINENABLE_WEN3 (1<<3)
+#define LCD_WINENABLE_WEN2 (1<<2)
+#define LCD_WINENABLE_WEN1 (1<<1)
+#define LCD_WINENABLE_WEN0 (1<<0)
+
+/* lcd_colorkey */
+#define LCD_COLORKEY_CKR (0xFF<<16)
+#define LCD_COLORKEY_CKG (0xFF<<8)
+#define LCD_COLORKEY_CKB (0xFF<<0)
+#define LCD_COLORKEY_CKR_N(N) ((N)<<16)
+#define LCD_COLORKEY_CKG_N(N) ((N)<<8)
+#define LCD_COLORKEY_CKB_N(N) ((N)<<0)
+
+/* lcd_colorkeymsk */
+#define LCD_COLORKEYMSK_CKMR (0xFF<<16)
+#define LCD_COLORKEYMSK_CKMG (0xFF<<8)
+#define LCD_COLORKEYMSK_CKMB (0xFF<<0)
+#define LCD_COLORKEYMSK_CKMR_N(N) ((N)<<16)
+#define LCD_COLORKEYMSK_CKMG_N(N) ((N)<<8)
+#define LCD_COLORKEYMSK_CKMB_N(N) ((N)<<0)
+
+/* lcd windows control 0 */
+#define LCD_WINCTRL0_OX (0x07FF<<21)
+#define LCD_WINCTRL0_OY (0x07FF<<10)
+#define LCD_WINCTRL0_A (0x00FF<<2)
+#define LCD_WINCTRL0_AEN (1<<1)
+#define LCD_WINCTRL0_OX_N(N) ((N)<<21)
+#define LCD_WINCTRL0_OY_N(N) ((N)<<10)
+#define LCD_WINCTRL0_A_N(N) ((N)<<2)
+
+/* lcd windows control 1 */
+#define LCD_WINCTRL1_PRI (3<<30)
+#define LCD_WINCTRL1_PIPE (1<<29)
+#define LCD_WINCTRL1_FRM (0xF<<25)
+#define LCD_WINCTRL1_CCO (1<<24)
+#define LCD_WINCTRL1_PO (3<<22)
+#define LCD_WINCTRL1_SZX (0x07FF<<11)
+#define LCD_WINCTRL1_SZY (0x07FF<<0)
+#define LCD_WINCTRL1_FRM_1BPP (0<<25)
+#define LCD_WINCTRL1_FRM_2BPP (1<<25)
+#define LCD_WINCTRL1_FRM_4BPP (2<<25)
+#define LCD_WINCTRL1_FRM_8BPP (3<<25)
+#define LCD_WINCTRL1_FRM_12BPP (4<<25)
+#define LCD_WINCTRL1_FRM_16BPP655 (5<<25)
+#define LCD_WINCTRL1_FRM_16BPP565 (6<<25)
+#define LCD_WINCTRL1_FRM_16BPP556 (7<<25)
+#define LCD_WINCTRL1_FRM_16BPPI1555 (8<<25)
+#define LCD_WINCTRL1_FRM_16BPPI5551 (9<<25)
+#define LCD_WINCTRL1_FRM_16BPPA1555 (10<<25)
+#define LCD_WINCTRL1_FRM_16BPPA5551 (11<<25)
+#define LCD_WINCTRL1_FRM_24BPP (12<<25)
+#define LCD_WINCTRL1_FRM_32BPP (13<<25)
+#define LCD_WINCTRL1_PRI_N(N) ((N)<<30)
+#define LCD_WINCTRL1_PO_00 (0<<22)
+#define LCD_WINCTRL1_PO_01 (1<<22)
+#define LCD_WINCTRL1_PO_10 (2<<22)
+#define LCD_WINCTRL1_PO_11 (3<<22)
+#define LCD_WINCTRL1_SZX_N(N) ((N-1)<<11)
+#define LCD_WINCTRL1_SZY_N(N) ((N-1)<<0)
+
+/* lcd windows control 2 */
+#define LCD_WINCTRL2_CKMODE (3<<24)
+#define LCD_WINCTRL2_DBM (1<<23)
+#define LCD_WINCTRL2_RAM (3<<21)
+#define LCD_WINCTRL2_BX (0x1FFF<<8)
+#define LCD_WINCTRL2_SCX (0xF<<4)
+#define LCD_WINCTRL2_SCY (0xF<<0)
+#define LCD_WINCTRL2_CKMODE_00 (0<<24)
+#define LCD_WINCTRL2_CKMODE_01 (1<<24)
+#define LCD_WINCTRL2_CKMODE_10 (2<<24)
+#define LCD_WINCTRL2_CKMODE_11 (3<<24)
+#define LCD_WINCTRL2_RAM_NONE (0<<21)
+#define LCD_WINCTRL2_RAM_PALETTE (1<<21)
+#define LCD_WINCTRL2_RAM_GAMMA (2<<21)
+#define LCD_WINCTRL2_RAM_BUFFER (3<<21)
+#define LCD_WINCTRL2_BX_N(N) ((N)<<8)
+#define LCD_WINCTRL2_SCX_1 (0<<4)
+#define LCD_WINCTRL2_SCX_2 (1<<4)
+#define LCD_WINCTRL2_SCX_4 (2<<4)
+#define LCD_WINCTRL2_SCY_1 (0<<0)
+#define LCD_WINCTRL2_SCY_2 (1<<0)
+#define LCD_WINCTRL2_SCY_4 (2<<0)
+
+/* lcd windows buffer control */
+#define LCD_WINBUFCTRL_DB (1<<1)
+#define LCD_WINBUFCTRL_DBN (1<<0)
+
+/* lcd_intstatus, lcd_intenable */
+#define LCD_INT_IFO (0xF<<14)
+#define LCD_INT_IFU (0xF<<10)
+#define LCD_INT_OFO (1<<9)
+#define LCD_INT_OFU (1<<8)
+#define LCD_INT_WAIT (1<<3)
+#define LCD_INT_SD (1<<2)
+#define LCD_INT_SA (1<<1)
+#define LCD_INT_SS (1<<0)
+
+/* lcd_horztiming */
+#define LCD_HORZTIMING_HND2 (0x1FF<<18)
+#define LCD_HORZTIMING_HND1 (0x1FF<<9)
+#define LCD_HORZTIMING_HPW (0x1FF<<0)
+#define LCD_HORZTIMING_HND2_N(N)(((N)-1)<<18)
+#define LCD_HORZTIMING_HND1_N(N)(((N)-1)<<9)
+#define LCD_HORZTIMING_HPW_N(N) (((N)-1)<<0)
+
+/* lcd_verttiming */
+#define LCD_VERTTIMING_VND2 (0x1FF<<18)
+#define LCD_VERTTIMING_VND1 (0x1FF<<9)
+#define LCD_VERTTIMING_VPW (0x1FF<<0)
+#define LCD_VERTTIMING_VND2_N(N)(((N)-1)<<18)
+#define LCD_VERTTIMING_VND1_N(N)(((N)-1)<<9)
+#define LCD_VERTTIMING_VPW_N(N) (((N)-1)<<0)
+
+/* lcd_clkcontrol */
+#define LCD_CLKCONTROL_EXT (1<<22)
+#define LCD_CLKCONTROL_DELAY (3<<20)
+#define LCD_CLKCONTROL_CDD (1<<19)
+#define LCD_CLKCONTROL_IB (1<<18)
+#define LCD_CLKCONTROL_IC (1<<17)
+#define LCD_CLKCONTROL_IH (1<<16)
+#define LCD_CLKCONTROL_IV (1<<15)
+#define LCD_CLKCONTROL_BF (0x1F<<10)
+#define LCD_CLKCONTROL_PCD (0x3FF<<0)
+#define LCD_CLKCONTROL_BF_N(N) (((N)-1)<<10)
+#define LCD_CLKCONTROL_PCD_N(N) ((N)<<0)
+
+/* lcd_pwmdiv */
+#define LCD_PWMDIV_EN (1<<31)
+#define LCD_PWMDIV_PWMDIV (0x1FFFF<<0)
+#define LCD_PWMDIV_PWMDIV_N(N) ((N)<<0)
+
+/* lcd_pwmhi */
+#define LCD_PWMHI_PWMHI1 (0xFFFF<<16)
+#define LCD_PWMHI_PWMHI0 (0xFFFF<<0)
+#define LCD_PWMHI_PWMHI1_N(N) ((N)<<16)
+#define LCD_PWMHI_PWMHI0_N(N) ((N)<<0)
+
+/* lcd_hwccon */
+#define LCD_HWCCON_EN (1<<0)
+
+/* lcd_cursorpos */
+#define LCD_CURSORPOS_HWCXOFF (0x1F<<27)
+#define LCD_CURSORPOS_HWCXPOS (0x07FF<<16)
+#define LCD_CURSORPOS_HWCYOFF (0x1F<<11)
+#define LCD_CURSORPOS_HWCYPOS (0x07FF<<0)
+#define LCD_CURSORPOS_HWCXOFF_N(N) ((N)<<27)
+#define LCD_CURSORPOS_HWCXPOS_N(N) ((N)<<16)
+#define LCD_CURSORPOS_HWCYOFF_N(N) ((N)<<11)
+#define LCD_CURSORPOS_HWCYPOS_N(N) ((N)<<0)
+
+/* lcd_cursorcolor */
+#define LCD_CURSORCOLOR_HWCA (0xFF<<24)
+#define LCD_CURSORCOLOR_HWCR (0xFF<<16)
+#define LCD_CURSORCOLOR_HWCG (0xFF<<8)
+#define LCD_CURSORCOLOR_HWCB (0xFF<<0)
+#define LCD_CURSORCOLOR_HWCA_N(N) ((N)<<24)
+#define LCD_CURSORCOLOR_HWCR_N(N) ((N)<<16)
+#define LCD_CURSORCOLOR_HWCG_N(N) ((N)<<8)
+#define LCD_CURSORCOLOR_HWCB_N(N) ((N)<<0)
+
+/* lcd_fifoctrl */
+#define LCD_FIFOCTRL_F3IF (1<<29)
+#define LCD_FIFOCTRL_F3REQ (0x1F<<24)
+#define LCD_FIFOCTRL_F2IF (1<<29)
+#define LCD_FIFOCTRL_F2REQ (0x1F<<16)
+#define LCD_FIFOCTRL_F1IF (1<<29)
+#define LCD_FIFOCTRL_F1REQ (0x1F<<8)
+#define LCD_FIFOCTRL_F0IF (1<<29)
+#define LCD_FIFOCTRL_F0REQ (0x1F<<0)
+#define LCD_FIFOCTRL_F3REQ_N(N) ((N-1)<<24)
+#define LCD_FIFOCTRL_F2REQ_N(N) ((N-1)<<16)
+#define LCD_FIFOCTRL_F1REQ_N(N) ((N-1)<<8)
+#define LCD_FIFOCTRL_F0REQ_N(N) ((N-1)<<0)
+
+/* lcd_outmask */
+#define LCD_OUTMASK_MASK (0x00FFFFFF)
+
+/********************************************************************/
+#endif /* _AU1200LCD_H */