igb: Add Support for new i210/i211 devices.
This patch adds new initialization functions and device support
for i210 and i211 devices.
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c
index faadf23..812d4f9 100644
--- a/drivers/net/ethernet/intel/igb/igb_ethtool.c
+++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c
@@ -552,10 +552,13 @@
regs_buff[548] = rd32(E1000_TDFT);
regs_buff[549] = rd32(E1000_TDFHS);
regs_buff[550] = rd32(E1000_TDFPC);
- regs_buff[551] = adapter->stats.o2bgptc;
- regs_buff[552] = adapter->stats.b2ospc;
- regs_buff[553] = adapter->stats.o2bspc;
- regs_buff[554] = adapter->stats.b2ogprc;
+
+ if (hw->mac.type > e1000_82580) {
+ regs_buff[551] = adapter->stats.o2bgptc;
+ regs_buff[552] = adapter->stats.b2ospc;
+ regs_buff[553] = adapter->stats.o2bspc;
+ regs_buff[554] = adapter->stats.b2ogprc;
+ }
if (hw->mac.type != e1000_82576)
return;
@@ -660,6 +663,9 @@
if (eeprom->len == 0)
return -EOPNOTSUPP;
+ if (hw->mac.type == e1000_i211)
+ return -EOPNOTSUPP;
+
if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16)))
return -EFAULT;
@@ -887,6 +893,36 @@
#define TABLE64_TEST_LO 5
#define TABLE64_TEST_HI 6
+/* i210 reg test */
+static struct igb_reg_test reg_test_i210[] = {
+ { E1000_FCAL, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_FCAH, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
+ { E1000_FCT, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
+ { E1000_RDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_RDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+ /* RDH is read-only for i210, only test RDT. */
+ { E1000_RDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_FCRTH, 0x100, 1, PATTERN_TEST, 0x0000FFF0, 0x0000FFF0 },
+ { E1000_FCTTV, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_TIPG, 0x100, 1, PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF },
+ { E1000_TDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_TDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_TDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+ { E1000_TDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0x003FFFFB },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0xFFFFFFFF },
+ { E1000_TCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
+ { E1000_RA, 0, 16, TABLE64_TEST_LO,
+ 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RA, 0, 16, TABLE64_TEST_HI,
+ 0x900FFFFF, 0xFFFFFFFF },
+ { E1000_MTA, 0, 128, TABLE32_TEST,
+ 0xFFFFFFFF, 0xFFFFFFFF },
+ { 0, 0, 0, 0, 0 }
+};
+
/* i350 reg test */
static struct igb_reg_test reg_test_i350[] = {
{ E1000_FCAL, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
@@ -1109,6 +1145,11 @@
test = reg_test_i350;
toggle = 0x7FEFF3FF;
break;
+ case e1000_i210:
+ case e1000_i211:
+ test = reg_test_i210;
+ toggle = 0x7FEFF3FF;
+ break;
case e1000_82580:
test = reg_test_82580;
toggle = 0x7FEFF3FF;
@@ -1190,23 +1231,13 @@
static int igb_eeprom_test(struct igb_adapter *adapter, u64 *data)
{
- u16 temp;
- u16 checksum = 0;
- u16 i;
-
*data = 0;
- /* Read and add up the contents of the EEPROM */
- for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) {
- if ((adapter->hw.nvm.ops.read(&adapter->hw, i, 1, &temp)) < 0) {
- *data = 1;
- break;
- }
- checksum += temp;
- }
- /* If Checksum is not Correct return error else test passed */
- if ((checksum != (u16) NVM_SUM) && !(*data))
- *data = 2;
+ /* Validate eeprom on all parts but i211 */
+ if (adapter->hw.mac.type != e1000_i211) {
+ if (adapter->hw.nvm.ops.validate(&adapter->hw) < 0)
+ *data = 2;
+ }
return *data;
}
@@ -1272,6 +1303,8 @@
ics_mask = 0x77DCFED5;
break;
case e1000_i350:
+ case e1000_i210:
+ case e1000_i211:
ics_mask = 0x77DCFED5;
break;
default:
@@ -1438,23 +1471,35 @@
{
struct e1000_hw *hw = &adapter->hw;
u32 ctrl_reg = 0;
+ u16 phy_reg = 0;
hw->mac.autoneg = false;
- if (hw->phy.type == e1000_phy_m88) {
+ switch (hw->phy.type) {
+ case e1000_phy_m88:
/* Auto-MDI/MDIX Off */
igb_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, 0x0808);
/* reset to update Auto-MDI/MDIX */
igb_write_phy_reg(hw, PHY_CONTROL, 0x9140);
/* autoneg off */
igb_write_phy_reg(hw, PHY_CONTROL, 0x8140);
- } else if (hw->phy.type == e1000_phy_82580) {
+ break;
+ case e1000_phy_82580:
/* enable MII loopback */
igb_write_phy_reg(hw, I82580_PHY_LBK_CTRL, 0x8041);
+ break;
+ case e1000_phy_i210:
+ /* set loopback speed in PHY */
+ igb_read_phy_reg(hw, (GS40G_PAGE_SELECT & GS40G_PAGE_2),
+ &phy_reg);
+ phy_reg |= GS40G_MAC_SPEED_1G;
+ igb_write_phy_reg(hw, (GS40G_PAGE_SELECT & GS40G_PAGE_2),
+ phy_reg);
+ ctrl_reg = rd32(E1000_CTRL_EXT);
+ default:
+ break;
}
- ctrl_reg = rd32(E1000_CTRL);
-
/* force 1000, set loopback */
igb_write_phy_reg(hw, PHY_CONTROL, 0x4140);
@@ -1467,7 +1512,7 @@
E1000_CTRL_FD | /* Force Duplex to FULL */
E1000_CTRL_SLU); /* Set link up enable bit */
- if (hw->phy.type == e1000_phy_m88)
+ if ((hw->phy.type == e1000_phy_m88) || (hw->phy.type == e1000_phy_i210))
ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */
wr32(E1000_CTRL, ctrl_reg);
@@ -1475,7 +1520,7 @@
/* Disable the receiver on the PHY so when a cable is plugged in, the
* PHY does not begin to autoneg when a cable is reconnected to the NIC.
*/
- if (hw->phy.type == e1000_phy_m88)
+ if ((hw->phy.type == e1000_phy_m88) || (hw->phy.type == e1000_phy_i210))
igb_phy_disable_receiver(adapter);
udelay(500);
@@ -1740,6 +1785,14 @@
*data = 0;
goto out;
}
+ if ((adapter->hw.mac.type == e1000_i210)
+ || (adapter->hw.mac.type == e1000_i210)) {
+ dev_err(&adapter->pdev->dev,
+ "Loopback test not supported "
+ "on this part at this time.\n");
+ *data = 0;
+ goto out;
+ }
*data = igb_setup_desc_rings(adapter);
if (*data)
goto out;