| /****************************************************************************** |
| * |
| * This file is provided under a dual BSD/GPLv2 license. When using or |
| * redistributing this file, you may do so under either license. |
| * |
| * GPL LICENSE SUMMARY |
| * |
| * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. |
| * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, |
| * USA |
| * |
| * The full GNU General Public License is included in this distribution |
| * in the file called COPYING. |
| * |
| * Contact Information: |
| * Intel Linux Wireless <ilw@linux.intel.com> |
| * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| * |
| * BSD LICENSE |
| * |
| * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. |
| * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * * Neither the name Intel Corporation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| *****************************************************************************/ |
| |
| #ifndef __fw_api_scan_h__ |
| #define __fw_api_scan_h__ |
| |
| #include "fw-api.h" |
| |
| /* Scan Commands, Responses, Notifications */ |
| |
| /* Masks for iwl_scan_channel.type flags */ |
| #define SCAN_CHANNEL_TYPE_ACTIVE BIT(0) |
| #define SCAN_CHANNEL_NARROW_BAND BIT(22) |
| |
| /* Max number of IEs for direct SSID scans in a command */ |
| #define PROBE_OPTION_MAX 20 |
| |
| /** |
| * struct iwl_scan_channel - entry in REPLY_SCAN_CMD channel table |
| * @channel: band is selected by iwl_scan_cmd "flags" field |
| * @tx_gain: gain for analog radio |
| * @dsp_atten: gain for DSP |
| * @active_dwell: dwell time for active scan in TU, typically 5-50 |
| * @passive_dwell: dwell time for passive scan in TU, typically 20-500 |
| * @type: type is broken down to these bits: |
| * bit 0: 0 = passive, 1 = active |
| * bits 1-20: SSID direct bit map. If any of these bits is set then |
| * the corresponding SSID IE is transmitted in probe request |
| * (bit i adds IE in position i to the probe request) |
| * bit 22: channel width, 0 = regular, 1 = TGj narrow channel |
| * |
| * @iteration_count: |
| * @iteration_interval: |
| * This struct is used once for each channel in the scan list. |
| * Each channel can independently select: |
| * 1) SSID for directed active scans |
| * 2) Txpower setting (for rate specified within Tx command) |
| * 3) How long to stay on-channel (behavior may be modified by quiet_time, |
| * quiet_plcp_th, good_CRC_th) |
| * |
| * To avoid uCode errors, make sure the following are true (see comments |
| * under struct iwl_scan_cmd about max_out_time and quiet_time): |
| * 1) If using passive_dwell (i.e. passive_dwell != 0): |
| * active_dwell <= passive_dwell (< max_out_time if max_out_time != 0) |
| * 2) quiet_time <= active_dwell |
| * 3) If restricting off-channel time (i.e. max_out_time !=0): |
| * passive_dwell < max_out_time |
| * active_dwell < max_out_time |
| */ |
| struct iwl_scan_channel { |
| __le32 type; |
| __le16 channel; |
| __le16 iteration_count; |
| __le32 iteration_interval; |
| __le16 active_dwell; |
| __le16 passive_dwell; |
| } __packed; /* SCAN_CHANNEL_CONTROL_API_S_VER_1 */ |
| |
| /** |
| * struct iwl_ssid_ie - directed scan network information element |
| * |
| * Up to 20 of these may appear in REPLY_SCAN_CMD, |
| * selected by "type" bit field in struct iwl_scan_channel; |
| * each channel may select different ssids from among the 20 entries. |
| * SSID IEs get transmitted in reverse order of entry. |
| */ |
| struct iwl_ssid_ie { |
| u8 id; |
| u8 len; |
| u8 ssid[IEEE80211_MAX_SSID_LEN]; |
| } __packed; /* SCAN_DIRECT_SSID_IE_API_S_VER_1 */ |
| |
| /** |
| * iwl_scan_flags - masks for scan command flags |
| *@SCAN_FLAGS_PERIODIC_SCAN: |
| *@SCAN_FLAGS_P2P_PUBLIC_ACTION_FRAME_TX: |
| *@SCAN_FLAGS_DELAYED_SCAN_LOWBAND: |
| *@SCAN_FLAGS_DELAYED_SCAN_HIGHBAND: |
| *@SCAN_FLAGS_FRAGMENTED_SCAN: |
| *@SCAN_FLAGS_PASSIVE2ACTIVE: use active scan on channels that was active |
| * in the past hour, even if they are marked as passive. |
| */ |
| enum iwl_scan_flags { |
| SCAN_FLAGS_PERIODIC_SCAN = BIT(0), |
| SCAN_FLAGS_P2P_PUBLIC_ACTION_FRAME_TX = BIT(1), |
| SCAN_FLAGS_DELAYED_SCAN_LOWBAND = BIT(2), |
| SCAN_FLAGS_DELAYED_SCAN_HIGHBAND = BIT(3), |
| SCAN_FLAGS_FRAGMENTED_SCAN = BIT(4), |
| SCAN_FLAGS_PASSIVE2ACTIVE = BIT(5), |
| }; |
| |
| /** |
| * enum iwl_scan_type - Scan types for scan command |
| * @SCAN_TYPE_FORCED: |
| * @SCAN_TYPE_BACKGROUND: |
| * @SCAN_TYPE_OS: |
| * @SCAN_TYPE_ROAMING: |
| * @SCAN_TYPE_ACTION: |
| * @SCAN_TYPE_DISCOVERY: |
| * @SCAN_TYPE_DISCOVERY_FORCED: |
| */ |
| enum iwl_scan_type { |
| SCAN_TYPE_FORCED = 0, |
| SCAN_TYPE_BACKGROUND = 1, |
| SCAN_TYPE_OS = 2, |
| SCAN_TYPE_ROAMING = 3, |
| SCAN_TYPE_ACTION = 4, |
| SCAN_TYPE_DISCOVERY = 5, |
| SCAN_TYPE_DISCOVERY_FORCED = 6, |
| }; /* SCAN_ACTIVITY_TYPE_E_VER_1 */ |
| |
| /** |
| * struct iwl_scan_cmd - scan request command |
| * ( SCAN_REQUEST_CMD = 0x80 ) |
| * @len: command length in bytes |
| * @scan_flags: scan flags from SCAN_FLAGS_* |
| * @channel_count: num of channels in channel list |
| * (1 - ucode_capa.n_scan_channels) |
| * @quiet_time: in msecs, dwell this time for active scan on quiet channels |
| * @quiet_plcp_th: quiet PLCP threshold (channel is quiet if less than |
| * this number of packets were received (typically 1) |
| * @passive2active: is auto switching from passive to active during scan allowed |
| * @rxchain_sel_flags: RXON_RX_CHAIN_* |
| * @max_out_time: in TUs, max out of serving channel time |
| * @suspend_time: how long to pause scan when returning to service channel: |
| * bits 0-19: beacon interal in TUs (suspend before executing) |
| * bits 20-23: reserved |
| * bits 24-31: number of beacons (suspend between channels) |
| * @rxon_flags: RXON_FLG_* |
| * @filter_flags: RXON_FILTER_* |
| * @tx_cmd: for active scans (zero for passive), w/o payload, |
| * no RS so specify TX rate |
| * @direct_scan: direct scan SSIDs |
| * @type: one of SCAN_TYPE_* |
| * @repeats: how many time to repeat the scan |
| */ |
| struct iwl_scan_cmd { |
| __le16 len; |
| u8 scan_flags; |
| u8 channel_count; |
| __le16 quiet_time; |
| __le16 quiet_plcp_th; |
| __le16 passive2active; |
| __le16 rxchain_sel_flags; |
| __le32 max_out_time; |
| __le32 suspend_time; |
| /* RX_ON_FLAGS_API_S_VER_1 */ |
| __le32 rxon_flags; |
| __le32 filter_flags; |
| struct iwl_tx_cmd tx_cmd; |
| struct iwl_ssid_ie direct_scan[PROBE_OPTION_MAX]; |
| __le32 type; |
| __le32 repeats; |
| |
| /* |
| * Probe request frame, followed by channel list. |
| * |
| * Size of probe request frame is specified by byte count in tx_cmd. |
| * Channel list follows immediately after probe request frame. |
| * Number of channels in list is specified by channel_count. |
| * Each channel in list is of type: |
| * |
| * struct iwl_scan_channel channels[0]; |
| * |
| * NOTE: Only one band of channels can be scanned per pass. You |
| * must not mix 2.4GHz channels and 5.2GHz channels, and you must wait |
| * for one scan to complete (i.e. receive SCAN_COMPLETE_NOTIFICATION) |
| * before requesting another scan. |
| */ |
| u8 data[0]; |
| } __packed; /* SCAN_REQUEST_FIXED_PART_API_S_VER_5 */ |
| |
| /* Response to scan request contains only status with one of these values */ |
| #define SCAN_RESPONSE_OK 0x1 |
| #define SCAN_RESPONSE_ERROR 0x2 |
| |
| /* |
| * SCAN_ABORT_CMD = 0x81 |
| * When scan abort is requested, the command has no fields except the common |
| * header. The response contains only a status with one of these values. |
| */ |
| #define SCAN_ABORT_POSSIBLE 0x1 |
| #define SCAN_ABORT_IGNORED 0x2 /* no pending scans */ |
| |
| /* TODO: complete documentation */ |
| #define SCAN_OWNER_STATUS 0x1 |
| #define MEASURE_OWNER_STATUS 0x2 |
| |
| /** |
| * struct iwl_scan_start_notif - notifies start of scan in the device |
| * ( SCAN_START_NOTIFICATION = 0x82 ) |
| * @tsf_low: TSF timer (lower half) in usecs |
| * @tsf_high: TSF timer (higher half) in usecs |
| * @beacon_timer: structured as follows: |
| * bits 0:19 - beacon interval in usecs |
| * bits 20:23 - reserved (0) |
| * bits 24:31 - number of beacons |
| * @channel: which channel is scanned |
| * @band: 0 for 5.2 GHz, 1 for 2.4 GHz |
| * @status: one of *_OWNER_STATUS |
| */ |
| struct iwl_scan_start_notif { |
| __le32 tsf_low; |
| __le32 tsf_high; |
| __le32 beacon_timer; |
| u8 channel; |
| u8 band; |
| u8 reserved[2]; |
| __le32 status; |
| } __packed; /* SCAN_START_NTF_API_S_VER_1 */ |
| |
| /* scan results probe_status first bit indicates success */ |
| #define SCAN_PROBE_STATUS_OK 0 |
| #define SCAN_PROBE_STATUS_TX_FAILED BIT(0) |
| /* error statuses combined with TX_FAILED */ |
| #define SCAN_PROBE_STATUS_FAIL_TTL BIT(1) |
| #define SCAN_PROBE_STATUS_FAIL_BT BIT(2) |
| |
| /* How many statistics are gathered for each channel */ |
| #define SCAN_RESULTS_STATISTICS 1 |
| |
| /** |
| * enum iwl_scan_complete_status - status codes for scan complete notifications |
| * @SCAN_COMP_STATUS_OK: scan completed successfully |
| * @SCAN_COMP_STATUS_ABORT: scan was aborted by user |
| * @SCAN_COMP_STATUS_ERR_SLEEP: sending null sleep packet failed |
| * @SCAN_COMP_STATUS_ERR_CHAN_TIMEOUT: timeout before channel is ready |
| * @SCAN_COMP_STATUS_ERR_PROBE: sending probe request failed |
| * @SCAN_COMP_STATUS_ERR_WAKEUP: sending null wakeup packet failed |
| * @SCAN_COMP_STATUS_ERR_ANTENNAS: invalid antennas chosen at scan command |
| * @SCAN_COMP_STATUS_ERR_INTERNAL: internal error caused scan abort |
| * @SCAN_COMP_STATUS_ERR_COEX: medium was lost ot WiMax |
| * @SCAN_COMP_STATUS_P2P_ACTION_OK: P2P public action frame TX was successful |
| * (not an error!) |
| * @SCAN_COMP_STATUS_ITERATION_END: indicates end of one repeatition the driver |
| * asked for |
| * @SCAN_COMP_STATUS_ERR_ALLOC_TE: scan could not allocate time events |
| */ |
| enum iwl_scan_complete_status { |
| SCAN_COMP_STATUS_OK = 0x1, |
| SCAN_COMP_STATUS_ABORT = 0x2, |
| SCAN_COMP_STATUS_ERR_SLEEP = 0x3, |
| SCAN_COMP_STATUS_ERR_CHAN_TIMEOUT = 0x4, |
| SCAN_COMP_STATUS_ERR_PROBE = 0x5, |
| SCAN_COMP_STATUS_ERR_WAKEUP = 0x6, |
| SCAN_COMP_STATUS_ERR_ANTENNAS = 0x7, |
| SCAN_COMP_STATUS_ERR_INTERNAL = 0x8, |
| SCAN_COMP_STATUS_ERR_COEX = 0x9, |
| SCAN_COMP_STATUS_P2P_ACTION_OK = 0xA, |
| SCAN_COMP_STATUS_ITERATION_END = 0x0B, |
| SCAN_COMP_STATUS_ERR_ALLOC_TE = 0x0C, |
| }; |
| |
| /** |
| * struct iwl_scan_results_notif - scan results for one channel |
| * ( SCAN_RESULTS_NOTIFICATION = 0x83 ) |
| * @channel: which channel the results are from |
| * @band: 0 for 5.2 GHz, 1 for 2.4 GHz |
| * @probe_status: SCAN_PROBE_STATUS_*, indicates success of probe request |
| * @num_probe_not_sent: # of request that weren't sent due to not enough time |
| * @duration: duration spent in channel, in usecs |
| * @statistics: statistics gathered for this channel |
| */ |
| struct iwl_scan_results_notif { |
| u8 channel; |
| u8 band; |
| u8 probe_status; |
| u8 num_probe_not_sent; |
| __le32 duration; |
| __le32 statistics[SCAN_RESULTS_STATISTICS]; |
| } __packed; /* SCAN_RESULT_NTF_API_S_VER_2 */ |
| |
| /** |
| * struct iwl_scan_complete_notif - notifies end of scanning (all channels) |
| * ( SCAN_COMPLETE_NOTIFICATION = 0x84 ) |
| * @scanned_channels: number of channels scanned (and number of valid results) |
| * @status: one of SCAN_COMP_STATUS_* |
| * @bt_status: BT on/off status |
| * @last_channel: last channel that was scanned |
| * @tsf_low: TSF timer (lower half) in usecs |
| * @tsf_high: TSF timer (higher half) in usecs |
| * @results: array of scan results, only "scanned_channels" of them are valid |
| */ |
| struct iwl_scan_complete_notif { |
| u8 scanned_channels; |
| u8 status; |
| u8 bt_status; |
| u8 last_channel; |
| __le32 tsf_low; |
| __le32 tsf_high; |
| struct iwl_scan_results_notif results[]; |
| } __packed; /* SCAN_COMPLETE_NTF_API_S_VER_2 */ |
| |
| /* scan offload */ |
| #define IWL_SCAN_MAX_BLACKLIST_LEN 64 |
| #define IWL_SCAN_SHORT_BLACKLIST_LEN 16 |
| #define IWL_SCAN_MAX_PROFILES 11 |
| #define SCAN_OFFLOAD_PROBE_REQ_SIZE 512 |
| |
| /* Default watchdog (in MS) for scheduled scan iteration */ |
| #define IWL_SCHED_SCAN_WATCHDOG cpu_to_le16(15000) |
| |
| #define IWL_GOOD_CRC_TH_DEFAULT cpu_to_le16(1) |
| #define CAN_ABORT_STATUS 1 |
| |
| #define IWL_FULL_SCAN_MULTIPLIER 5 |
| #define IWL_FAST_SCHED_SCAN_ITERATIONS 3 |
| |
| enum scan_framework_client { |
| SCAN_CLIENT_SCHED_SCAN = BIT(0), |
| SCAN_CLIENT_NETDETECT = BIT(1), |
| SCAN_CLIENT_ASSET_TRACKING = BIT(2), |
| }; |
| |
| /** |
| * struct iwl_scan_offload_cmd - SCAN_REQUEST_FIXED_PART_API_S_VER_6 |
| * @scan_flags: see enum iwl_scan_flags |
| * @channel_count: channels in channel list |
| * @quiet_time: dwell time, in milisiconds, on quiet channel |
| * @quiet_plcp_th: quiet channel num of packets threshold |
| * @good_CRC_th: passive to active promotion threshold |
| * @rx_chain: RXON rx chain. |
| * @max_out_time: max TUs to be out of assoceated channel |
| * @suspend_time: pause scan this TUs when returning to service channel |
| * @flags: RXON flags |
| * @filter_flags: RXONfilter |
| * @tx_cmd: tx command for active scan; for 2GHz and for 5GHz. |
| * @direct_scan: list of SSIDs for directed active scan |
| * @scan_type: see enum iwl_scan_type. |
| * @rep_count: repetition count for each scheduled scan iteration. |
| */ |
| struct iwl_scan_offload_cmd { |
| __le16 len; |
| u8 scan_flags; |
| u8 channel_count; |
| __le16 quiet_time; |
| __le16 quiet_plcp_th; |
| __le16 good_CRC_th; |
| __le16 rx_chain; |
| __le32 max_out_time; |
| __le32 suspend_time; |
| /* RX_ON_FLAGS_API_S_VER_1 */ |
| __le32 flags; |
| __le32 filter_flags; |
| struct iwl_tx_cmd tx_cmd[2]; |
| /* SCAN_DIRECT_SSID_IE_API_S_VER_1 */ |
| struct iwl_ssid_ie direct_scan[PROBE_OPTION_MAX]; |
| __le32 scan_type; |
| __le32 rep_count; |
| } __packed; |
| |
| enum iwl_scan_offload_channel_flags { |
| IWL_SCAN_OFFLOAD_CHANNEL_ACTIVE = BIT(0), |
| IWL_SCAN_OFFLOAD_CHANNEL_NARROW = BIT(22), |
| IWL_SCAN_OFFLOAD_CHANNEL_FULL = BIT(24), |
| IWL_SCAN_OFFLOAD_CHANNEL_PARTIAL = BIT(25), |
| }; |
| |
| /* channel configuration for struct iwl_scan_offload_cfg. Each channels needs: |
| * __le32 type: bitmap; bits 1-20 are for directed scan to i'th ssid and |
| * see enum iwl_scan_offload_channel_flags. |
| * __le16 channel_number: channel number 1-13 etc. |
| * __le16 iter_count: repetition count for the channel. |
| * __le32 iter_interval: interval between two innteration on one channel. |
| * u8 active_dwell. |
| * u8 passive_dwell. |
| */ |
| #define IWL_SCAN_CHAN_SIZE 14 |
| |
| /** |
| * iwl_scan_offload_cfg - SCAN_OFFLOAD_CONFIG_API_S |
| * @scan_cmd: scan command fixed part |
| * @data: scan channel configuration and probe request frames |
| */ |
| struct iwl_scan_offload_cfg { |
| struct iwl_scan_offload_cmd scan_cmd; |
| u8 data[0]; |
| } __packed; |
| |
| /** |
| * iwl_scan_offload_blacklist - SCAN_OFFLOAD_BLACKLIST_S |
| * @ssid: MAC address to filter out |
| * @reported_rssi: AP rssi reported to the host |
| * @client_bitmap: clients ignore this entry - enum scan_framework_client |
| */ |
| struct iwl_scan_offload_blacklist { |
| u8 ssid[ETH_ALEN]; |
| u8 reported_rssi; |
| u8 client_bitmap; |
| } __packed; |
| |
| enum iwl_scan_offload_network_type { |
| IWL_NETWORK_TYPE_BSS = 1, |
| IWL_NETWORK_TYPE_IBSS = 2, |
| IWL_NETWORK_TYPE_ANY = 3, |
| }; |
| |
| enum iwl_scan_offload_band_selection { |
| IWL_SCAN_OFFLOAD_SELECT_2_4 = 0x4, |
| IWL_SCAN_OFFLOAD_SELECT_5_2 = 0x8, |
| IWL_SCAN_OFFLOAD_SELECT_ANY = 0xc, |
| }; |
| |
| /** |
| * iwl_scan_offload_profile - SCAN_OFFLOAD_PROFILE_S |
| * @ssid_index: index to ssid list in fixed part |
| * @unicast_cipher: encryption olgorithm to match - bitmap |
| * @aut_alg: authentication olgorithm to match - bitmap |
| * @network_type: enum iwl_scan_offload_network_type |
| * @band_selection: enum iwl_scan_offload_band_selection |
| * @client_bitmap: clients waiting for match - enum scan_framework_client |
| */ |
| struct iwl_scan_offload_profile { |
| u8 ssid_index; |
| u8 unicast_cipher; |
| u8 auth_alg; |
| u8 network_type; |
| u8 band_selection; |
| u8 client_bitmap; |
| u8 reserved[2]; |
| } __packed; |
| |
| /** |
| * iwl_scan_offload_profile_cfg - SCAN_OFFLOAD_PROFILES_CFG_API_S_VER_1 |
| * @blaclist: AP list to filter off from scan results |
| * @profiles: profiles to search for match |
| * @blacklist_len: length of blacklist |
| * @num_profiles: num of profiles in the list |
| * @match_notify: clients waiting for match found notification |
| * @pass_match: clients waiting for the results |
| * @active_clients: active clients bitmap - enum scan_framework_client |
| * @any_beacon_notify: clients waiting for match notification without match |
| */ |
| struct iwl_scan_offload_profile_cfg { |
| struct iwl_scan_offload_profile profiles[IWL_SCAN_MAX_PROFILES]; |
| u8 blacklist_len; |
| u8 num_profiles; |
| u8 match_notify; |
| u8 pass_match; |
| u8 active_clients; |
| u8 any_beacon_notify; |
| u8 reserved[2]; |
| } __packed; |
| |
| /** |
| * iwl_scan_offload_schedule - schedule of scan offload |
| * @delay: delay between iterations, in seconds. |
| * @iterations: num of scan iterations |
| * @full_scan_mul: number of partial scans before each full scan |
| */ |
| struct iwl_scan_offload_schedule { |
| __le16 delay; |
| u8 iterations; |
| u8 full_scan_mul; |
| } __packed; |
| |
| /* |
| * iwl_scan_offload_flags |
| * |
| * IWL_SCAN_OFFLOAD_FLAG_PASS_ALL: pass all results - no filtering. |
| * IWL_SCAN_OFFLOAD_FLAG_CACHED_CHANNEL: add cached channels to partial scan. |
| * IWL_SCAN_OFFLOAD_FLAG_EBS_QUICK_MODE: EBS duration is 100mSec - typical |
| * beacon period. Finding channel activity in this mode is not guaranteed. |
| * IWL_SCAN_OFFLOAD_FLAG_EBS_ACCURATE_MODE: EBS duration is 200mSec. |
| * Assuming beacon period is 100ms finding channel activity is guaranteed. |
| */ |
| enum iwl_scan_offload_flags { |
| IWL_SCAN_OFFLOAD_FLAG_PASS_ALL = BIT(0), |
| IWL_SCAN_OFFLOAD_FLAG_CACHED_CHANNEL = BIT(2), |
| IWL_SCAN_OFFLOAD_FLAG_EBS_QUICK_MODE = BIT(5), |
| IWL_SCAN_OFFLOAD_FLAG_EBS_ACCURATE_MODE = BIT(6), |
| }; |
| |
| /** |
| * iwl_scan_offload_req - scan offload request command |
| * @flags: bitmap - enum iwl_scan_offload_flags. |
| * @watchdog: maximum scan duration in TU. |
| * @delay: delay in seconds before first iteration. |
| * @schedule_line: scan offload schedule, for fast and regular scan. |
| */ |
| struct iwl_scan_offload_req { |
| __le16 flags; |
| __le16 watchdog; |
| __le16 delay; |
| __le16 reserved; |
| struct iwl_scan_offload_schedule schedule_line[2]; |
| } __packed; |
| |
| enum iwl_scan_offload_compleate_status { |
| IWL_SCAN_OFFLOAD_COMPLETED = 1, |
| IWL_SCAN_OFFLOAD_ABORTED = 2, |
| }; |
| |
| enum iwl_scan_ebs_status { |
| IWL_SCAN_EBS_SUCCESS, |
| IWL_SCAN_EBS_FAILED, |
| IWL_SCAN_EBS_CHAN_NOT_FOUND, |
| }; |
| |
| /** |
| * iwl_scan_offload_complete - SCAN_OFFLOAD_COMPLETE_NTF_API_S_VER_1 |
| * @last_schedule_line: last schedule line executed (fast or regular) |
| * @last_schedule_iteration: last scan iteration executed before scan abort |
| * @status: enum iwl_scan_offload_compleate_status |
| * @ebs_status: last EBS status, see IWL_SCAN_EBS_* |
| */ |
| struct iwl_scan_offload_complete { |
| u8 last_schedule_line; |
| u8 last_schedule_iteration; |
| u8 status; |
| u8 ebs_status; |
| } __packed; |
| |
| /** |
| * iwl_sched_scan_results - SCAN_OFFLOAD_MATCH_FOUND_NTF_API_S_VER_1 |
| * @ssid_bitmap: SSIDs indexes found in this iteration |
| * @client_bitmap: clients that are active and wait for this notification |
| */ |
| struct iwl_sched_scan_results { |
| __le16 ssid_bitmap; |
| u8 client_bitmap; |
| u8 reserved; |
| }; |
| |
| /* Unified LMAC scan API */ |
| |
| #define IWL_MVM_BASIC_PASSIVE_DWELL 110 |
| |
| /** |
| * iwl_scan_req_tx_cmd - SCAN_REQ_TX_CMD_API_S |
| * @tx_flags: combination of TX_CMD_FLG_* |
| * @rate_n_flags: rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is |
| * cleared. Combination of RATE_MCS_* |
| * @sta_id: index of destination station in FW station table |
| * @reserved: for alignment and future use |
| */ |
| struct iwl_scan_req_tx_cmd { |
| __le32 tx_flags; |
| __le32 rate_n_flags; |
| u8 sta_id; |
| u8 reserved[3]; |
| } __packed; |
| |
| enum iwl_scan_channel_flags_lmac { |
| IWL_UNIFIED_SCAN_CHANNEL_FULL = BIT(27), |
| IWL_UNIFIED_SCAN_CHANNEL_PARTIAL = BIT(28), |
| }; |
| |
| /** |
| * iwl_scan_channel_cfg_lmac - SCAN_CHANNEL_CFG_S_VER2 |
| * @flags: bits 1-20: directed scan to i'th ssid |
| * other bits &enum iwl_scan_channel_flags_lmac |
| * @channel_number: channel number 1-13 etc |
| * @iter_count: scan iteration on this channel |
| * @iter_interval: interval in seconds between iterations on one channel |
| */ |
| struct iwl_scan_channel_cfg_lmac { |
| __le32 flags; |
| __le16 channel_num; |
| __le16 iter_count; |
| __le32 iter_interval; |
| } __packed; |
| |
| /* |
| * iwl_scan_probe_segment - PROBE_SEGMENT_API_S_VER_1 |
| * @offset: offset in the data block |
| * @len: length of the segment |
| */ |
| struct iwl_scan_probe_segment { |
| __le16 offset; |
| __le16 len; |
| } __packed; |
| |
| /* iwl_scan_probe_req - PROBE_REQUEST_FRAME_API_S_VER_2 |
| * @mac_header: first (and common) part of the probe |
| * @band_data: band specific data |
| * @common_data: last (and common) part of the probe |
| * @buf: raw data block |
| */ |
| struct iwl_scan_probe_req { |
| struct iwl_scan_probe_segment mac_header; |
| struct iwl_scan_probe_segment band_data[2]; |
| struct iwl_scan_probe_segment common_data; |
| u8 buf[SCAN_OFFLOAD_PROBE_REQ_SIZE]; |
| } __packed; |
| |
| enum iwl_scan_channel_flags { |
| IWL_SCAN_CHANNEL_FLAG_EBS = BIT(0), |
| IWL_SCAN_CHANNEL_FLAG_EBS_ACCURATE = BIT(1), |
| IWL_SCAN_CHANNEL_FLAG_CACHE_ADD = BIT(2), |
| }; |
| |
| /* iwl_scan_channel_opt - CHANNEL_OPTIMIZATION_API_S |
| * @flags: enum iwl_scan_channel_flgs |
| * @non_ebs_ratio: how many regular scan iteration before EBS |
| */ |
| struct iwl_scan_channel_opt { |
| __le16 flags; |
| __le16 non_ebs_ratio; |
| } __packed; |
| |
| /** |
| * iwl_mvm_lmac_scan_flags |
| * @IWL_MVM_LMAC_SCAN_FLAG_PASS_ALL: pass all beacons and probe responses |
| * without filtering. |
| * @IWL_MVM_LMAC_SCAN_FLAG_PASSIVE: force passive scan on all channels |
| * @IWL_MVM_LMAC_SCAN_FLAG_PRE_CONNECTION: single channel scan |
| * @IWL_MVM_LMAC_SCAN_FLAG_ITER_COMPLETE: send iteration complete notification |
| * @IWL_MVM_LMAC_SCAN_FLAG_MULTIPLE_SSIDS multiple SSID matching |
| * @IWL_MVM_LMAC_SCAN_FLAG_FRAGMENTED: all passive scans will be fragmented |
| */ |
| enum iwl_mvm_lmac_scan_flags { |
| IWL_MVM_LMAC_SCAN_FLAG_PASS_ALL = BIT(0), |
| IWL_MVM_LMAC_SCAN_FLAG_PASSIVE = BIT(1), |
| IWL_MVM_LMAC_SCAN_FLAG_PRE_CONNECTION = BIT(2), |
| IWL_MVM_LMAC_SCAN_FLAG_ITER_COMPLETE = BIT(3), |
| IWL_MVM_LMAC_SCAN_FLAG_MULTIPLE_SSIDS = BIT(4), |
| IWL_MVM_LMAC_SCAN_FLAG_FRAGMENTED = BIT(5), |
| }; |
| |
| enum iwl_scan_priority { |
| IWL_SCAN_PRIORITY_LOW, |
| IWL_SCAN_PRIORITY_MEDIUM, |
| IWL_SCAN_PRIORITY_HIGH, |
| }; |
| |
| /** |
| * iwl_scan_req_unified_lmac - SCAN_REQUEST_CMD_API_S_VER_1 |
| * @reserved1: for alignment and future use |
| * @channel_num: num of channels to scan |
| * @active-dwell: dwell time for active channels |
| * @passive-dwell: dwell time for passive channels |
| * @fragmented-dwell: dwell time for fragmented passive scan |
| * @reserved2: for alignment and future use |
| * @rx_chain_selct: PHY_RX_CHAIN_* flags |
| * @scan_flags: &enum iwl_mvm_lmac_scan_flags |
| * @max_out_time: max time (in TU) to be out of associated channel |
| * @suspend_time: pause scan this long (TUs) when returning to service channel |
| * @flags: RXON flags |
| * @filter_flags: RXON filter |
| * @tx_cmd: tx command for active scan; for 2GHz and for 5GHz |
| * @direct_scan: list of SSIDs for directed active scan |
| * @scan_prio: enum iwl_scan_priority |
| * @iter_num: number of scan iterations |
| * @delay: delay in seconds before first iteration |
| * @schedule: two scheduling plans. The first one is finite, the second one can |
| * be infinite. |
| * @channel_opt: channel optimization options, for full and partial scan |
| * @data: channel configuration and probe request packet. |
| */ |
| struct iwl_scan_req_unified_lmac { |
| /* SCAN_REQUEST_FIXED_PART_API_S_VER_7 */ |
| __le32 reserved1; |
| u8 n_channels; |
| u8 active_dwell; |
| u8 passive_dwell; |
| u8 fragmented_dwell; |
| __le16 reserved2; |
| __le16 rx_chain_select; |
| __le32 scan_flags; |
| __le32 max_out_time; |
| __le32 suspend_time; |
| /* RX_ON_FLAGS_API_S_VER_1 */ |
| __le32 flags; |
| __le32 filter_flags; |
| struct iwl_scan_req_tx_cmd tx_cmd[2]; |
| struct iwl_ssid_ie direct_scan[PROBE_OPTION_MAX]; |
| __le32 scan_prio; |
| /* SCAN_REQ_PERIODIC_PARAMS_API_S */ |
| __le32 iter_num; |
| __le32 delay; |
| struct iwl_scan_offload_schedule schedule[2]; |
| struct iwl_scan_channel_opt channel_opt[2]; |
| u8 data[]; |
| } __packed; |
| |
| /** |
| * struct iwl_lmac_scan_results_notif - scan results for one channel - |
| * SCAN_RESULT_NTF_API_S_VER_3 |
| * @channel: which channel the results are from |
| * @band: 0 for 5.2 GHz, 1 for 2.4 GHz |
| * @probe_status: SCAN_PROBE_STATUS_*, indicates success of probe request |
| * @num_probe_not_sent: # of request that weren't sent due to not enough time |
| * @duration: duration spent in channel, in usecs |
| */ |
| struct iwl_lmac_scan_results_notif { |
| u8 channel; |
| u8 band; |
| u8 probe_status; |
| u8 num_probe_not_sent; |
| __le32 duration; |
| } __packed; |
| |
| /** |
| * struct iwl_lmac_scan_complete_notif - notifies end of scanning (all channels) |
| * SCAN_COMPLETE_NTF_API_S_VER_3 |
| * @scanned_channels: number of channels scanned (and number of valid results) |
| * @status: one of SCAN_COMP_STATUS_* |
| * @bt_status: BT on/off status |
| * @last_channel: last channel that was scanned |
| * @tsf_low: TSF timer (lower half) in usecs |
| * @tsf_high: TSF timer (higher half) in usecs |
| * @results: an array of scan results, only "scanned_channels" of them are valid |
| */ |
| struct iwl_lmac_scan_complete_notif { |
| u8 scanned_channels; |
| u8 status; |
| u8 bt_status; |
| u8 last_channel; |
| __le32 tsf_low; |
| __le32 tsf_high; |
| struct iwl_scan_results_notif results[]; |
| } __packed; |
| |
| /** |
| * iwl_scan_offload_complete - PERIODIC_SCAN_COMPLETE_NTF_API_S_VER_2 |
| * @last_schedule_line: last schedule line executed (fast or regular) |
| * @last_schedule_iteration: last scan iteration executed before scan abort |
| * @status: enum iwl_scan_offload_complete_status |
| * @ebs_status: EBS success status &enum iwl_scan_ebs_status |
| * @time_after_last_iter; time in seconds elapsed after last iteration |
| */ |
| struct iwl_periodic_scan_complete { |
| u8 last_schedule_line; |
| u8 last_schedule_iteration; |
| u8 status; |
| u8 ebs_status; |
| __le32 time_after_last_iter; |
| __le32 reserved; |
| } __packed; |
| |
| #endif |