| # |
| # Misc strange devices |
| # |
| |
| menuconfig MISC_DEVICES |
| bool "Misc devices" |
| default y |
| ---help--- |
| Say Y here to get to see options for device drivers from various |
| different categories. This option alone does not add any kernel code. |
| |
| If you say N, all options in this submenu will be skipped and disabled. |
| |
| if MISC_DEVICES |
| |
| config ATMEL_PWM |
| tristate "Atmel AT32/AT91 PWM support" |
| depends on AVR32 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 |
| help |
| This option enables device driver support for the PWM channels |
| on certain Atmel prcoessors. Pulse Width Modulation is used for |
| purposes including software controlled power-efficent backlights |
| on LCD displays, motor control, and waveform generation. |
| |
| config ATMEL_TCLIB |
| bool "Atmel AT32/AT91 Timer/Counter Library" |
| depends on (AVR32 || ARCH_AT91) |
| help |
| Select this if you want a library to allocate the Timer/Counter |
| blocks found on many Atmel processors. This facilitates using |
| these blocks by different drivers despite processor differences. |
| |
| config ATMEL_TCB_CLKSRC |
| bool "TC Block Clocksource" |
| depends on ATMEL_TCLIB && GENERIC_TIME |
| default y |
| help |
| Select this to get a high precision clocksource based on a |
| TC block with a 5+ MHz base clock rate. Two timer channels |
| are combined to make a single 32-bit timer. |
| |
| When GENERIC_CLOCKEVENTS is defined, the third timer channel |
| may be used as a clock event device supporting oneshot mode |
| (delays of up to two seconds) based on the 32 KiHz clock. |
| |
| config ATMEL_TCB_CLKSRC_BLOCK |
| int |
| depends on ATMEL_TCB_CLKSRC |
| prompt "TC Block" if ARCH_AT91RM9200 || ARCH_AT91SAM9260 || CPU_AT32AP700X |
| default 0 |
| range 0 1 |
| help |
| Some chips provide more than one TC block, so you have the |
| choice of which one to use for the clock framework. The other |
| TC can be used for other purposes, such as PWM generation and |
| interval timing. |
| |
| config IBM_ASM |
| tristate "Device driver for IBM RSA service processor" |
| depends on X86 && PCI && INPUT && EXPERIMENTAL |
| ---help--- |
| This option enables device driver support for in-band access to the |
| IBM RSA (Condor) service processor in eServer xSeries systems. |
| The ibmasm device driver allows user space application to access |
| ASM (Advanced Systems Management) functions on the service |
| processor. The driver is meant to be used in conjunction with |
| a user space API. |
| The ibmasm driver also enables the OS to use the UART on the |
| service processor board as a regular serial port. To make use of |
| this feature serial driver support (CONFIG_SERIAL_8250) must be |
| enabled. |
| |
| WARNING: This software may not be supported or function |
| correctly on your IBM server. Please consult the IBM ServerProven |
| website <http://www.pc.ibm.com/ww/eserver/xseries/serverproven> for |
| information on the specific driver level and support statement |
| for your IBM server. |
| |
| config PHANTOM |
| tristate "Sensable PHANToM (PCI)" |
| depends on PCI |
| help |
| Say Y here if you want to build a driver for Sensable PHANToM device. |
| |
| This driver is only for PCI PHANToMs. |
| |
| If you choose to build module, its name will be phantom. If unsure, |
| say N here. |
| |
| config SGI_IOC4 |
| tristate "SGI IOC4 Base IO support" |
| depends on PCI |
| ---help--- |
| This option enables basic support for the IOC4 chip on certain |
| SGI IO controller cards (IO9, IO10, and PCI-RT). This option |
| does not enable any specific functions on such a card, but provides |
| necessary infrastructure for other drivers to utilize. |
| |
| If you have an SGI Altix with an IOC4-based card say Y. |
| Otherwise say N. |
| |
| config TIFM_CORE |
| tristate "TI Flash Media interface support (EXPERIMENTAL)" |
| depends on EXPERIMENTAL && PCI |
| help |
| If you want support for Texas Instruments(R) Flash Media adapters |
| you should select this option and then also choose an appropriate |
| host adapter, such as 'TI Flash Media PCI74xx/PCI76xx host adapter |
| support', if you have a TI PCI74xx compatible card reader, for |
| example. |
| You will also have to select some flash card format drivers. MMC/SD |
| cards are supported via 'MMC/SD Card support: TI Flash Media MMC/SD |
| Interface support (MMC_TIFM_SD)'. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called tifm_core. |
| |
| config TIFM_7XX1 |
| tristate "TI Flash Media PCI74xx/PCI76xx host adapter support (EXPERIMENTAL)" |
| depends on PCI && TIFM_CORE && EXPERIMENTAL |
| default TIFM_CORE |
| help |
| This option enables support for Texas Instruments(R) PCI74xx and |
| PCI76xx families of Flash Media adapters, found in many laptops. |
| To make actual use of the device, you will have to select some |
| flash card format drivers, as outlined in the TIFM_CORE Help. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called tifm_7xx1. |
| |
| config ICS932S401 |
| tristate "Integrated Circuits ICS932S401" |
| depends on I2C && EXPERIMENTAL |
| help |
| If you say yes here you get support for the Integrated Circuits |
| ICS932S401 clock control chips. |
| |
| This driver can also be built as a module. If so, the module |
| will be called ics932s401. |
| |
| config ATMEL_SSC |
| tristate "Device driver for Atmel SSC peripheral" |
| depends on AVR32 || ARCH_AT91 |
| ---help--- |
| This option enables device driver support for Atmel Syncronized |
| Serial Communication peripheral (SSC). |
| |
| The SSC peripheral supports a wide variety of serial frame based |
| communications, i.e. I2S, SPI, etc. |
| |
| If unsure, say N. |
| |
| config ENCLOSURE_SERVICES |
| tristate "Enclosure Services" |
| default n |
| help |
| Provides support for intelligent enclosures (bays which |
| contain storage devices). You also need either a host |
| driver (SCSI/ATA) which supports enclosures |
| or a SCSI enclosure device (SES) to use these services. |
| |
| config SGI_XP |
| tristate "Support communication between SGI SSIs" |
| depends on NET |
| depends on (IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || X86_64) && SMP |
| select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 |
| select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 |
| select SGI_GRU if (IA64_GENERIC || IA64_SGI_UV || X86_64) && SMP |
| ---help--- |
| An SGI machine can be divided into multiple Single System |
| Images which act independently of each other and have |
| hardware based memory protection from the others. Enabling |
| this feature will allow for direct communication between SSIs |
| based on a network adapter and DMA messaging. |
| |
| config HP_ILO |
| tristate "Channel interface driver for HP iLO/iLO2 processor" |
| depends on PCI |
| default n |
| help |
| The channel interface driver allows applications to communicate |
| with iLO/iLO2 management processors present on HP ProLiant |
| servers. Upon loading, the driver creates /dev/hpilo/dXccbN files, |
| which can be used to gather data from the management processor, |
| via read and write system calls. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called hpilo. |
| |
| config SGI_GRU |
| tristate "SGI GRU driver" |
| depends on (X86_64 || IA64_SGI_UV || IA64_GENERIC) && SMP |
| default n |
| select MMU_NOTIFIER |
| ---help--- |
| The GRU is a hardware resource located in the system chipset. The GRU |
| contains memory that can be mmapped into the user address space. This memory is |
| used to communicate with the GRU to perform functions such as load/store, |
| scatter/gather, bcopy, AMOs, etc. The GRU is directly accessed by user |
| instructions using user virtual addresses. GRU instructions (ex., bcopy) use |
| user virtual addresses for operands. |
| |
| If you are not running on a SGI UV system, say N. |
| |
| config SGI_GRU_DEBUG |
| bool "SGI GRU driver debug" |
| depends on SGI_GRU |
| default n |
| ---help--- |
| This option enables addition debugging code for the SGI GRU driver. If |
| you are unsure, say N. |
| |
| config DELL_LAPTOP |
| tristate "Dell Laptop Extras (EXPERIMENTAL)" |
| depends on X86 |
| depends on DCDBAS |
| depends on EXPERIMENTAL |
| depends on BACKLIGHT_CLASS_DEVICE |
| depends on RFKILL |
| default n |
| ---help--- |
| This driver adds support for rfkill and backlight control to Dell |
| laptops. |
| |
| source "drivers/misc/c2port/Kconfig" |
| source "drivers/misc/eeprom/Kconfig" |
| |
| endif # MISC_DEVICES |