Qualcomm technologies inc audio devices for ALSA sound SoC

* msm-pcm

Required properties:

 - compatible : "qcom,msm-pcm-dsp"

 - qcom,msm-pcm-dsp-id : device node id

* msm-pcm-low-latency

Required properties:

 - compatible : "qcom,msm-pcm-dsp"

 - qcom,msm-pcm-dsp-id : device node id

   Optional properties

      - qcom,msm-pcm-low-latency : Flag indicating whether
        the device node is of type low latency.

      - qcom,latency-level : Flag indicating whether the device node
                            is of type regular low latency or ultra
                            low latency.
                            regular : regular low latency stream
                            ultra : ultra low latency stream
                            ull-pp : ultra low latency stream with post-processing capability

* msm-pcm-dsp-noirq

Required properties:

 - compatible : "qcom,msm-pcm-dsp-noirq";

   Optional properties

      - qcom,msm-pcm-low-latency : Flag indicating whether
        the device node is of type low latency

      - qcom,latency-level : Flag indicating whether the device node
                           is of type low latency or ultra low latency
                           ultra : ultra low latency stream
                           ull-pp : ultra low latency stream with post-processing capability
* msm-pcm-routing

Required properties:

 - compatible : "qcom,msm-pcm-routing"

* msm-pcm-lpa

Required properties:

 - compatible : "qcom,msm-pcm-lpa"

* msm-compr-dsp

Required properties:

 - compatible : "qcom,msm-compr-dsp"

* msm-compress-dsp

Required properties:

 - compatible : "qcom,msm-compress-dsp"

Optional properties
 - qcom,adsp-version:
	This property can be used to specify the ADSP version/name.
	Based on ADSP version, we decide if we have to use older
	ADSP APIs or newer. Right now we are adding "MDSP 1.2" for
	8909 purpose.If the ADSP version is anything other than this
	we use new ADSP APIs.

* msm-voip-dsp

Required properties:

 - compatible : "qcom,msm-voip-dsp"

* msm-pcm-voice

Required properties:

 - compatible : "qcom,msm-pcm-voice"
 - qcom,destroy-cvd : Flag indicating whether to destroy cvd at
                      the end of call for low memory targets

* msm-voice-host-pcm

Required properties:

 - compatible : "qcom,msm-voice-host-pcm"

* msm-voice-svc

Required properties:

 - compatible : "qcom,msm-voice-svc"

* msm-stub-codec

Required properties:

 - compatible : "qcom,msm-stub-codec"

* msm-hdmi-dba-codec-rx

Required properties:

 - compatible : "qcom,msm-hdmi-dba-codec-rx"
 - qcom,dba-bridge-chip: String info to indicate which bridge-chip
                         is used for HDMI using DBA.

* msm-dai-fe

Required properties:

 - compatible : "qcom,msm-dai-fe"

* msm-pcm-afe

Required properties:

 - compatible : "qcom,msm-pcm-afe"

* msm-pcm-dtmf

Required properties:

 - compatible : "qcom,msm-pcm-dtmf"
 - qcom,msm-pcm-dtmf : Enable DTMF driver in Audio. DTMF driver is
   used for generation and detection of DTMF tones, when user is in
   active voice call. APR commands are sent from DTMF driver to ADSP.

* msm-dai-stub

[First Level Nodes]

Required properties:

 - compatible : "msm-dai-stub"

[Second Level Nodes]

Required properties:

 - compatible : "qcom,msm-dai-stub-dev"
 - qcom,msm-dai-stub-dev-id : Stub dai port ID value is from 0 to 3.
   This enables stub CPU dai in Audio. The stub dai is used when
   there is no real backend in Audio.

* msm-dai-q6-spdif

Optional properties:

 - compatible : "msm-dai-q6-spdif"

* msm-dai-q6-hdmi

Required properties:
 - compatible : "msm-dai-q6-hdmi"
 - qcom,msm-dai-q6-dev-id : The hdmi multi channel port ID.
   It is passed onto the dsp from the apps to form an audio
   path to the HDMI device. Currently the only supported value
   is 8, which indicates the rx path used for audio playback
   on HDMI device.

* msm-lsm-client

Required properties:

 - compatible : "qcom,msm-lsm-client"

* msm-pcm-loopback

Required properties:

 - compatible : "qcom,msm-pcm-loopback"

Optional properties:

 - qcom,msm-pcm-loopback-low-latency : Flag indicating whether
   the device node is of type low latency.

* msm-transcode-loopback

Required properties:

 - compatible : "qcom,msm-transcode-loopback"

* msm-dai-q6

[First Level Nodes]

Required properties:

 - compatible : "msm-dai-q6"

Optional properties:

 - qcom,ext-spk-amp-supply : External speaker amplifier power supply.
 - qcom,ext-spk-amp-gpio : External speaker amplifier enable signal.

[Second Level Nodes]

Required properties:

 - compatible : "qcom,msm-dai-q6-dev"
 - qcom,msm-dai-q6-dev-id : The slimbus multi channel port ID
                            Value is from 16384 to 16397
                            BT SCO port ID value from 12288 to 12289
                            RT Proxy port ID values from 224 to 225 and 240 to
			    241
                            FM Rx and TX port ID values from 12292 to 12293
                            incall record Rx and TX port ID values from 32771 to 32772
                            inCall Music Delivery port ID is 32773
			    incall Music 2 Delivery port ID is 32770

* msm-auxpcm

Required properties:

 - compatible :                           "qcom,msm-auxpcm-dev"

 - qcom,msm-cpudai-auxpcm-mode:           mode information. The first value is
                                          for 8khz mode, the second is for
                                          16khz
                                          0 - for PCM

 - qcom,msm-cpudai-auxpcm-sync:           sync information. The first value is
                                          for 8khz mode, the second is for
                                          16khz

 - qcom,msm-cpudai-auxpcm-frame:          No.of bytes per frame. The first
                                          value is for 8khz mode, the second
                                          is for 16khz
                                          5 - 256BPF
                                          4 - 128BPF

 - qcom,msm-cpudai-auxpcm-quant:          Type of quantization. The first
                                          value is for 8khz mode, the second
                                          is for 16khz
                                          2 - Linear quantization

 - qcom,msm-cpudai-auxpcm-num-slots:      Number of slots per mode in the
                                          msm-cpudai-auxpcm-slot-mapping
                                          array.
                                          The first value is for 8khz mode, the
                                          second is for 16khz. Max number of
                                          slots supported by DSP is 4, anything
                                          above 4 will be truncated to 4 when
                                          sent to DSP.

 - qcom,msm-cpudai-auxpcm-slot-mapping:   Array of slot numbers for multi
                                          slot scenario. The first array
                                          is for 8khz mode, the second is
                                          for 16khz. The size of the array
                                          is determined by the value in
                                          qcom,msm-cpudai-auxpcm-num-slots

 - qcom,msm-cpudai-auxpcm-data:           Data field - 0. The first value is
                                          for 8khz mode, the second is for
                                          16khz

 - qcom,msm-cpudai-auxpcm-pcm-clk-rate:   Clock rate for pcm - 2048000. The
                                          first value is for 8khz mode, the
                                          second is for 16KHz mode. When clock
					  rate is set to zero, then external
					  clock is assumed.

 - qcom,msm-auxpcm-interface:             name of AUXPCM interface "primary"
                                          indicates primary AUXPCM interface
                                          "secondary" indicates secondary
                                          AUXPCM interface
Optional properties:

- pinctrl-names:			  Pinctrl state names for each pin
					  group configuration.
- pinctrl-x: 				  Defines pinctrl state for each pin
					  group
- qcom,msm-cpudai-afe-clk-ver:            Indicates version of AFE clock
					  interface to be used for enabling
					  PCM clock. If not defined, selects
					  default AFE clock interface.

* msm-pcm-hostless

Required properties:

 - compatible : "qcom,msm-pcm-hostless"

* msm-audio-apr

Required properties:

 - compatible : "qcom,msm-audio-apr"
		This device is added to represent APR module.

 - qcom,subsys-name: This value provides the subsystem name where codec
		is present. It can be "apr_modem" or "apr_adsp". This
		property enable apr driver to receive subsystem up/down
		notification from modem/adsp.

Optional properties:

 - compatible : "qcom,msm-audio-apr-dummy"
		Add this compatible as child device to msm-audio-apr device.
		This child device is added after lpass is up to invoke
		deferred probe devices.

* msm-ocmem-audio

Required properties:

 - compatible :                            "qcom,msm-ocmem-audio"

 - qcom,msm_bus,name:                      Client name

 - qcom,msm_bus,num_cases:                 Total number of use cases

 - qcom,msm_bus,active_only:               Context flag for requests in active
					   or dual (active & sleep) contex

 - qcom,msm_bus,num_paths:                 Total number of master-slave pairs

 - qcom,msm_bus,vectors:                   Arrays of unsigned integers
					   representing:
					       master-id, slave-id, arbitrated
					       bandwidth,
					       instantaneous bandwidth
* wcd9xxx_intc

Required properties:

 - compatible :                            "qcom,wcd9xxx-irq"

 - interrupt-controller :                  Mark this device node as an
					   interrupt controller

 - #interrupt-cells :                      Should be 1

 - interrupt-parent :                      Parent interrupt controller

 - qcom,gpio-connect                       Gpio that connects to parent
                                           interrupt controller

* audio-ext-clk-up

Required properties:

 - compatible :                            "qcom,audio-ref-clk"

 - qcom,audio-ref-clk-gpio  :               PMIC or APQ gpio that will be
                                            requested to enable reference
                                            or external clock.

Optional properties:

 - qcom,node_has_rpm_clock:                 Boolean property used to indicate
                                            whether ref. clock can be enabled
                                            with a gpio toggle or Kernel clock
                                            API call.

 - clock-names:                             Name of the PMIC clock that needs
                                            to be enabled for audio ref clock.
                                            This clock is set as parent.

 - clocks:                                  phandle reference to the parent
                                            clock.

 - qcom,mclk-clk-reg:                       Indicate the register address for mclk.

 - qcom,lpass-mclk-id:                      Property to update LPASS MCLK Id.

* audio_slimslave

Required properties:

 - compatible :                            "qcom,audio-slimslave"

 - elemental-addr:                         slimbus slave enumeration address.

* msm-cpe-lsm

Required properties:

 - compatible : "qcom,msm-cpe-lsm"
 - qcom,msm-cpe-lsm-id : lsm afe port ID. CPE lsm driver uses
   this property to find out the input afe port ID. Currently
   only supported values are 1 and 3.

* wcd_us_euro_gpio

Required properties:

 - compatible : "qcom,msm-cdc-pinctrl"

Optional properties:
 - qcom,lpi-gpios : This boolean property is added if GPIOs are under
		    LPI TLMM.

* msm-dai-slim

Required properties:

 - compatible :                            "qcom,msm-dai-slim"

 - elemental-addr:                         slimbus slave enumeration address.

* wcd_gpio_ctrl

Required properties:

 - compatible :                            "qcom,msm-cdc-pinctrl"

 - qcom,cdc-rst-n-gpio :                   TLMM GPIO number

 - pinctrl-names:                          Pinctrl state names for each pin
                                           group configuration.
 - pinctrl-x:                              Defines pinctrl state for each pin
                                           group.
* msm_cdc_pinctrl

Required properties:

 - compatible :                            "qcom,msm-cdc-pinctrl"

 - pinctrl-names:                          Pinctrl state names for each pin
                                           group configuration.
 - pinctrl-x:                              Defines pinctrl state for each pin
                                           group.

* wcd_dsp_glink

Required properties:

 - compatible :                            "qcom,wcd-dsp-glink"
 - qcom,msm-codec-glink-edge:              Name of the glink edge which is used
                                           for IPC.
                                           If no name is set, it defaults to "wdsp"

* msm_ext_disp_audio_codec_rx

Required properties:

 - compatible :                            "qcom,msm-ext-disp-audio-codec-rx"

Example:

	qcom,msm-pcm {
		compatible = "qcom,msm-pcm-dsp";
		qcom,msm-pcm-dsp-id = <0>;
	};

	qcom,msm-pcm-low-latency {
		compatible = "qcom,msm-pcm-dsp";
		qcom,msm-pcm-dsp-id = <1>;
		qcom,msm-pcm-low-latency;
	};

	qcom,msm-pcm-loopback-low-latency {
		compatible = "qcom,msm-pcm-loopback";
		qcom,msm-pcm-loopback-low-latency;
	};

        qcom,msm-pcm-routing {
                compatible = "qcom,msm-pcm-routing";
        };

        qcom,msm-pcm-lpa {
                compatible = "qcom,msm-pcm-lpa";
        };

        qcom,msm-compr-dsp {
                compatible = "qcom,msm-compr-dsp";
        };

        qcom,msm-compress-dsp {
                compatible = "qcom,msm-compress-dsp";
        };

        qcom,msm-voip-dsp {
                compatible = "qcom,msm-voip-dsp";
        };

	qcom,msm-pcm-voice {
		compatible = "qcom,msm-pcm-voice";
		qcom,destroy-cvd;
	};

        qcom,msm-voice-host-pcm {
                compatible = "qcom,msm-voice-host-pcm";
        };

        qcom,msm-stub-codec {
                compatible = "qcom,msm-stub-codec";
        };

        qcom,msm-dai-fe {
                compatible = "qcom,msm-dai-fe";
        };

	qcom,msm-pcm-dtmf {
		compatible = "qcom,msm-pcm-dtmf";
	};

	qcom,msm-dai-stub {
		compatible = "qcom,msm-dai-stub";
	};

	qcom,msm-dai-q6-spdif {
		compatible = "qcom,msm-dai-q6-spdif";
	};

	qcom,msm-dai-q6-hdmi {
		compatible = "qcom,msm-dai-q6-hdmi";
		qcom,msm-dai-q6-dev-id = <8>;
	};

	dai_dp: qcom,msm-dai-q6-dp {
		compatible = "qcom,msm-dai-q6-hdmi";
		qcom,msm-dai-q6-dev-id = <24608>;
	};

	qcom,msm-dai-q6 {
		compatible = "qcom,msm-dai-q6";
		qcom,msm-dai-q6-sb-0-rx {
			compatible = "qcom,msm-dai-q6-dev";
			qcom,msm-dai-q6-dev-id = <16384>;
		};

		qcom,msm-dai-q6-sb-0-tx {
			compatible = "qcom,msm-dai-q6-dev";
			qcom,msm-dai-q6-dev-id = <16385>;
		};

		qcom,msm-dai-q6-sb-1-rx {
			compatible = "qcom,msm-dai-q6-dev";
			qcom,msm-dai-q6-dev-id = <16386>;
		};

		qcom,msm-dai-q6-sb-1-tx {
			compatible = "qcom,msm-dai-q6-dev";
			qcom,msm-dai-q6-dev-id = <16387>;
		};

		qcom,msm-dai-q6-sb-3-rx {
			compatible = "qcom,msm-dai-q6-dev";
			qcom,msm-dai-q6-dev-id = <16390>;
		};

		qcom,msm-dai-q6-sb-3-tx {
			compatible = "qcom,msm-dai-q6-dev";
			qcom,msm-dai-q6-dev-id = <16391>;
		};

		qcom,msm-dai-q6-sb-4-rx {
			compatible = "qcom,msm-dai-q6-dev";
			qcom,msm-dai-q6-dev-id = <16392>;
		};

		qcom,msm-dai-q6-sb-4-tx {
			compatible = "qcom,msm-dai-q6-dev";
			qcom,msm-dai-q6-dev-id = <16393>;
		};

		qcom,msm-dai-q6-sb-5-tx {
			compatible = "qcom,msm-dai-q6-dev";
			qcom,msm-dai-q6-dev-id = <16395>;
		};

		qcom,msm-dai-q6-sb-6-rx {
			compatible = "qcom,msm-dai-q6-dev";
			qcom,msm-dai-q6-dev-id = <16396>;
		};

		qcom,msm-dai-q6-sb-6-tx {
			compatible = "qcom,msm-dai-q6-dev";
			qcom,msm-dai-q6-dev-id = <16397>;
		};

		qcom,msm-dai-q6-bt-sco-rx {
			compatible = "qcom,msm-dai-q6-dev";
			qcom,msm-dai-q6-dev-id = <12288>;
		};

		qcom,msm-dai-q6-bt-sco-tx {
			compatible = "qcom,msm-dai-q6-dev";
			qcom,msm-dai-q6-dev-id = <12289>;
		};

		qcom,msm-dai-q6-int-fm-rx {
			compatible = "qcom,msm-dai-q6-dev";
			qcom,msm-dai-q6-dev-id = <12292>;
		};

		qcom,msm-dai-q6-int-fm-tx {
			compatible = "qcom,msm-dai-q6-dev";
			qcom,msm-dai-q6-dev-id = <12293>;
		};

		qcom,msm-dai-q6-be-afe-pcm-rx {
			compatible = "qcom,msm-dai-q6-dev";
			qcom,msm-dai-q6-dev-id = <224>;
		};

		qcom,msm-dai-q6-be-afe-pcm-tx {
			compatible = "qcom,msm-dai-q6-dev";
			qcom,msm-dai-q6-dev-id = <225>;
		};

		qcom,msm-dai-q6-afe-proxy-rx {
			compatible = "qcom,msm-dai-q6-dev";
			qcom,msm-dai-q6-dev-id = <241>;
		};

		qcom,msm-dai-q6-afe-proxy-tx {
			compatible = "qcom,msm-dai-q6-dev";
			qcom,msm-dai-q6-dev-id = <240>;
		};

		qcom,msm-dai-q6-incall-record-rx {
			compatible = "qcom,msm-dai-q6-dev";
			qcom,msm-dai-q6-dev-id = <32771>;
		};

		qcom,msm-dai-q6-incall-record-tx {
			compatible = "qcom,msm-dai-q6-dev";
			qcom,msm-dai-q6-dev-id = <32772>;
		};

		qcom,msm-dai-q6-incall-music-rx {
			compatible = "qcom,msm-dai-q6-dev";
			qcom,msm-dai-q6-dev-id = <32773>;
		};

		qcom,msm-dai-q6-incall-music-2-rx {
			compatible = "qcom,msm-dai-q6-dev";
			qcom,msm-dai-q6-dev-id = <32770>;
		};

		qcom,msm-dai-q6-incall-music-dl-rx {
			compatible = "qcom,msm-dai-q6-dev";
			qcom,msm-dai-q6-dev-id = <32774>;
		};
	};

	qcom,msm-pri-auxpcm {
		qcom,msm-cpudai-auxpcm-mode = <1>, <1>;
		qcom,msm-cpudai-auxpcm-sync = <1>, <1>;
		qcom,msm-cpudai-auxpcm-frame = <5>, <4>;
		qcom,msm-cpudai-auxpcm-quant = <2>, <2>;
		qcom,msm-cpudai-auxpcm-num-slots = <4>, <4>;
		qcom,msm-cpudai-auxpcm-slot-mapping = <1 0 0 0>, <1 3 0 0>;
		qcom,msm-cpudai-auxpcm-data = <0>, <0>;
		qcom,msm-cpudai-auxpcm-pcm-clk-rate = <2048000>, <2048000>;
		qcom,msm-auxpcm-interface = "primary";
		compatible = "qcom,msm-auxpcm-dev";
		pinctrl-names = "default", "idle";
		pinctrl-0 = <&pri_aux_pcm_active &pri_aux_pcm_din_active>;
		pinctrl-1 = <&pri_aux_pcm_sleep &pri_aux_pcm_din_sleep>;
	};

        qcom,msm-pcm-hostless {
                compatible = "qcom,msm-pcm-hostless";
        };

	qcom,msm-audio-apr {
		compatible = "qcom,msm-audio-apr";
		msm_audio_apr_dummy {
			compatible = "qcom,msm-audio-apr-dummy";
		};
                q6core {
                        compatible = "qcom,q6core-audio";
		};

		qcom,subsys-name = "apr_adsp";
	};

	qcom,msm-ocmem-audio {
		compatible = "qcom,msm-ocmem-audio";
		qcom,msm_bus,name = "audio-ocmem";
		qcom,msm_bus,num_cases = <2>;
		qcom,msm_bus,active_only = <0>;
		qcom,msm_bus,num_paths = <1>;
		qcom,msm_bus,vectors =
			<11 604 0 0>,
			<11 604 32505856 325058560>;
	};

	wcd9xxx_intc: wcd9xxx-irq {
		compatible = "qcom,wcd9xxx-irq";
		interrupt-controller;
		#interrupt-cells = <1>;
		interrupt-parent = <&msmgpio>;
		interrupts = <72 0>;
		interrupt-names = "cdc-int";
	};

	clock_audio: audio_ext_clk {
		compatible = "qcom,audio-ref-clk";
		qcom,audio-ref-clk-gpios = <&pm8994_gpios 15 0>;
		clock-names = "osr_clk";
		clocks = <&clock_rpm clk_div_clk1>;
		qcom,node_has_rpm_clock;
		#clock-cells = <1>;
		pinctrl-names = "sleep", "active";
		pinctrl-0 = <&spkr_i2s_clk_sleep>;
		pinctrl-1 = <&spkr_i2s_clk_active>;
	};

	audio_slimslave {
		compatible = "qcom,audio-slimslave";
		elemental-addr = [ff ff ff ff 17 02];
	};

	msm_dai_slim {
		compatible = "qcom,msm_dai_slim";
		elemental-addr = [ff ff ff fe 17 02];
	};

	wcd_gpio_ctrl {
		compatible = "qcom,msm-cdc-pinctrl";
		qcom,cdc-rst-n-gpio = <&tlmm 64 0>;
		pinctrl-names = "aud_active", "aud_sleep";
		pinctrl-0 = <&cdc_reset_active>;
		pinctrl-1 = <&cdc_reset_sleep>;
	};

	msm_cdc_pinctrl {
		compatible = "qcom,msm-cdc-pinctrl";
		pinctrl-names = "aud_active", "aud_sleep";
		pinctrl-0 = <&cdc_reset_active>;
		pinctrl-1 = <&cdc_reset_sleep>;
	};

	wcd_dsp_glink {
		compatible = "qcom,wcd-dsp-glink";
		qcom,msm-codec-glink-edge = "bg";
	};

	msm_ext_disp_audio_codec_rx {
		compatible = "qcom,msm-ext-disp-audio-codec-rx";
	};


* MSM8916 ASoC Machine driver

Required properties:
- compatible : "qcom,msm8x16-audio-codec"
- qcom,model : The user-visible name of this sound card.
- qcom,msm-snd-card-id : This id is used to recognize the sound card number
- qcom,msm-codec-type : This property is used to recognize the codec type
  internal or external.
- qcom,msm-hs-micbias-type : This property is used to recognize the headset
  micbias type, internal or external.
- qcom,msm-ext-pa : This property is used to inform machine driver about
  the connection of external PA over available MI2S interfaces,
  following values can be given to this property.
  primary -> Primary MI2S interface
  secondary -> Secondary MI2S interface
  tertiary -> Tertiary MI2S interface
  quaternary -> Quaternary MI2S interface
- qcom,msm-mclk-freq : This property is used to inform machine driver about
mclk frequency needs to be configured for internal and external PA.
- qcom,msm-mbhc-hphl-swh: This property is used to distinguish headset HPHL
switch type on target typically the switch type will be normally open or
normally close, value for this property 0 for normally close and 1 for
normally open.
-  qcom,msm-mbhc-gnd-swh: This property is used to distinguish headset GND
switch type on target typically the switch type will be normally open or
normally close, value for this property 0 for normally close and 1 for
normally open.
- qcom,audio-routing : A list of the connections between audio components.
- pinctrl-names : Pincntrl entries to configure the PDM gpio lines and
		  cross connection switch gpio accordingly
- pinctrl-0 : This explains the active state of the PDM gpio lines
- pinctrl-1 : This explains the suspend state of the PDM gpio lines
- pinctrl-2 : This explains the active state of the cross connection
	      gpio lines
- pinctrl-3 : This explains the suspend state of the cross connection
              gpio lines
- qcom,tapan-mclk-clk-freq : Tapan mclk Freq in Hz.
- qcom,prim-auxpcm-gpio-clk  : GPIO on which Primary AUXPCM clk signal is coming.
- qcom,prim-auxpcm-gpio-sync : GPIO on which Primary AUXPCM SYNC signal is coming.
- qcom,prim-auxpcm-gpio-din  : GPIO on which Primary AUXPCM DIN signal is coming.
- qcom,prim-auxpcm-gpio-dout : GPIO on which Primary AUXPCM DOUT signal is coming.
- qcom,prim-auxpcm-gpio-set : set of GPIO lines used for Primary AUXPCM port
- qcom,tapan-codec-9302: Indicates that this device node is for WCD9302 audio
			    codec.
- asoc-platform: This is phandle list containing the references to platform device
		 nodes that are used as part of the sound card dai-links.
- asoc-platform-names: This property contains list of platform names. The order of
		       the platform names should match to that of the phandle order
		       given in "asoc-platform".
- asoc-cpu: This is phandle list containing the references to cpu dai device nodes
	    that are used as part of the sound card dai-links.
- asoc-cpu-names: This property contains list of cpu dai names. The order of the
		  cpu dai names should match to that of the phandle order given
		  in "asoc-cpu". The cpu names are in the form of "%s.%d" form,
		  where the id (%d) field represents the back-end AFE port id that
		  this CPU dai is associated with.
- asoc-codec: This is phandle list containing the references to codec dai device
	      nodes that are used as part of the sound card dai-links.
- asoc-codec-names: This property contains list of codec dai names. The order of the
		    codec dai names should match to that of the phandle order given
		    in "asoc-codec".

Optional Properties:
- qcom,us-euro-gpios : GPIO on which gnd/mic swap signal is coming.

Example:

	msm_dig_codec: qcom,msm-int-codec {
		compatible = "qcom,msm_int_core_codec";
		qcom,dig-cdc-base-addr = <0xc0f0000>;
	};

	sound {
		compatible = "qcom,msm8x16-audio-codec";
		qcom,model = "msm8x16-snd-card";
		qcom,msm-snd-card-id = <0>;
		qcom,msm-codec-type = "internal";
		qcom,msm-ext-pa = <0>;
		qcom,msm-mclk-freq = <12288000>;
		qcom,msm-mbhc-hphl-swh = <0>;
		qcom,msm-mbhc-gnd-swh = <0>;
		qcom,msm-hs-micbias-type = "internal";
		qcom,cdc-us-euro-gpios = <&msmgpio 120 0>;
		qcom,audio-routing =
			"RX_BIAS", "MCLK",
			"INT_LDO_H", "MCLK",
			"MIC BIAS External", "Handset Mic",
			"MIC BIAS Internal2", "Headset Mic",
			"MIC BIAS External", "Secondary Mic",
			"AMIC1", "MIC BIAS External",
			"AMIC2", "MIC BIAS Internal2",
			"AMIC3", "MIC BIAS External";
		pinctrl-names = "cdc_pdm_lines_act",
				"cdc_pdm_lines_sus",
				"cross_conn_det_act",
				"cross_conn_det_sus";
		pinctrl-0 = <&cdc_pdm_lines_act>;
		pinctrl-1 = <&cdc_pdm_lines_sus>;
		pinctrl-2 = <&cross_conn_det_act>;
		pinctrl-3 = <&cross_conn_det_sus>;
		qcom,tapan-mclk-clk-freq = <9600000>;
		qcom,prim-auxpcm-gpio-clk  = <&msm_gpio 63 0>;
		qcom,prim-auxpcm-gpio-sync = <&msm_gpio 64 0>;
		qcom,prim-auxpcm-gpio-din  = <&msm_gpio 65 0>;
		qcom,prim-auxpcm-gpio-dout = <&msm_gpio 66 0>;
		qcom,prim-auxpcm-gpio-set = "prim-gpio-prim";
		qcom,tapan-codec-9302;
		asoc-platform = <&pcm0>, <&pcm1>, <&voip>, <&voice>,
				<&loopback>, <&compress>, <&hostless>,
				<&afe>, <&lsm>, <&routing>, <&lpa>;
		asoc-platform-names = "msm-pcm-dsp.0", "msm-pcm-dsp.1",
				"msm-voip-dsp", "msm-pcm-voice", "msm-pcm-loopback",
				"msm-compress-dsp", "msm-pcm-hostless", "msm-pcm-afe",
				"msm-lsm-client", "msm-pcm-routing", "msm-pcm-lpa";
		asoc-cpu = <&dai_pri_auxpcm>, <&dai_hdmi>, <&dai_dp>,
				<&dai_mi2s0>, <&dai_mi2s1>, <&dai_mi2s2>, <&dai_mi2s3>,
				<&sb_0_rx>, <&sb_0_tx>, <&sb_1_rx>, <&sb_1_tx>,
				<&sb_3_rx>, <&sb_3_tx>, <&sb_4_rx>, <&sb_4_tx>,
				<&bt_sco_rx>, <&bt_sco_tx>, <&int_fm_rx>, <&int_fm_tx>,
				<&afe_pcm_rx>, <&afe_pcm_tx>, <&afe_proxy_rx>, <&afe_proxy_tx>,
				<&incall_record_rx>, <&incall_record_tx>, <&incall_music_rx>,
				<&incall_music_2_rx>;
		asoc-cpu-names = "msm-dai-q6-auxpcm.1", "msm-dai-q6-hdmi.8",
				"msm-dai-q6-dp.24608",
				"msm-dai-q6-mi2s.0", "msm-dai-q6-mi2s.1",
				"msm-dai-q6-mi2s.2", "msm-dai-q6-mi2s.3",
				"msm-dai-q6-dev.16384", "msm-dai-q6-dev.16385",
				"msm-dai-q6-dev.16386", "msm-dai-q6-dev.16387",
				"msm-dai-q6-dev.16390", "msm-dai-q6-dev.16391",
				"msm-dai-q6-dev.16392", "msm-dai-q6-dev.16393",
				"msm-dai-q6-dev.12288", "msm-dai-q6-dev.12289",
				"msm-dai-q6-dev.12292", "msm-dai-q6-dev.12293",
				"msm-dai-q6-dev.224", "msm-dai-q6-dev.225",
				"msm-dai-q6-dev.241", "msm-dai-q6-dev.240",
				"msm-dai-q6-dev.32771", "msm-dai-q6-dev.32772",
				"msm-dai-q6-dev.32773", "msm-dai-q6-dev.32770";
		asoc-codec = <&stub>, <&pm8916_tombak_dig>;
		asoc-codec-names = "msm-stub-codec.1", "tombak_codec";
	};

* MSM8974 ASoC Machine driver

Required properties:
- compatible : "qcom,msm8974-audio-taiko"
- qcom,model : The user-visible name of this sound card.
- qcom,audio-routing : A list of the connections between audio components.
  Each entry is a pair of strings, the first being the connection's sink,
  the second being the connection's source.
- qcom,cdc-mclk-gpios : GPIO on which mclk signal is coming.
- qcom,taiko-mclk-clk-freq : Taiko mclk Freq in Hz. currently only 9600000Hz
				is supported.
- qcom,prim-auxpcm-gpio-clk  : GPIO on which Primary AUXPCM clk signal is coming.
- qcom,prim-auxpcm-gpio-sync : GPIO on which Primary AUXPCM SYNC signal is coming.
- qcom,prim-auxpcm-gpio-din  : GPIO on which Primary AUXPCM DIN signal is coming.
- qcom,prim-auxpcm-gpio-dout : GPIO on which Primary AUXPCM DOUT signal is coming.
- qcom,prim-auxpcm-gpio-set : set of GPIO lines used for Primary AUXPCM port
		 Possible Values:
		 prim-gpio-prim : Primary AUXPCM shares GPIOs with Primary MI2S
		 prim-gpio-tert : Primary AUXPCM shares GPIOs with Tertiary MI2S
- qcom,sec-auxpcm-gpio-clk  : GPIO on which Secondary AUXPCM clk signal is coming.
- qcom,sec-auxpcm-gpio-sync : GPIO on which Secondary AUXPCM SYNC signal is coming.
- qcom,sec-auxpcm-gpio-din  : GPIO on which Secondary AUXPCM DIN signal is coming.
- qcom,sec-auxpcm-gpio-dout : GPIO on which Secondary AUXPCM DOUT signal is coming.
- qcom,us-euro-gpios : GPIO on which gnd/mic swap signal is coming.
- asoc-platform: This is phandle list containing the references to platform device
		 nodes that are used as part of the sound card dai-links.
- asoc-platform-names: This property contains list of platform names. The order of
		       the platform names should match to that of the phandle order
		       given in "asoc-platform".
- asoc-cpu: This is phandle list containing the references to cpu dai device nodes
	    that are used as part of the sound card dai-links.
- asoc-cpu-names: This property contains list of cpu dai names. The order of the
		  cpu dai names should match to that of the phandle order given
		  in "asoc-cpu". The cpu names are in the form of "%s.%d" form,
		  where the id (%d) field represents the back-end AFE port id that
		  this CPU dai is associated with.
- asoc-codec: This is phandle list containing the references to codec dai device
	      nodes that are used as part of the sound card dai-links.
- asoc-codec-names: This property contains list of codec dai names. The order of the
		    codec dai names should match to that of the phandle order given
		    in "asoc-codec".
Optional properties:
- reg : Offset and length of the register region(s) for MI2S/PCM MUX.
	Not applicable for all targets.
- reg-names : Register region name(s) referenced in reg above.
	      Not applicable for all targets.
	 Required register resource entries are:
	 "lpaif_pri_mode_muxsel": Physical address of MUX to select between
				  Primary PCM and Primary MI2S
	 "lpaif_sec_mode_muxsel": Physical address of MUX to select between
				  Secondary PCM and Secondary MI2S
	 "lpaif_tert_mode_muxsel": Physical address of MUX to select between
				   Primary PCM and Tertiary MI2S
	 "lpaif_quat_mode_muxsel": Physical address of MUX to select between
				   Secondary PCM and Quarternary MI2S
- qcom,hdmi-audio-rx: specifies if HDMI audio support is enabled or not.
- qcom,ext-ult-spk-amp-gpio : GPIO for enabling of speaker path amplifier.

- qcom,ext-ult-lo-amp-gpio: GPIO to enable external ultrasound lineout
			    amplifier.

- qcom,headset-jack-type-NO: Adjust GPIO level based on the headset jack type.
- qcom,tapan-codec-9302: Indicates that this device node is for WCD9302 audio
			    codec.
- qcom,mbhc-bias-internal: Flag to indicate if internal micbias should be used
			   for headset detection.
- qcom,dock-plug-det-irq: Interrupt line to detect Docking/Undocking of Liquid
			  device
- qcom,ext-spk-rear-panel-irq: Interrupt line to detect rear panel speakers
              jack for Dragon Board.
- qcom,ext-spk-front-panel-irq: Interrupt line to detect front panel speakers
              jack for Dragon Board.
- qcom,ext-mic-front-panel-irq: Interrupt line to detect front panel microphone
              jack for Dragon Board.
- qcom,mbhc-audio-jack-type : String to indicate the jack type on the hardware.
		Possible Values:
		4-pole-jack : Jack on the hardware is 4-pole.
		5-pole-jack : Jack on the hardware is 5-pole.
		6-pole-jack : Jack on the hardware is 6-pole.

* APQ8074 ASoC Machine driver

Required properties:
- compatible : "qcom,apq8074-audio-taiko"

Example:

sound {
	compatible = "qcom,msm8974-audio-taiko";
	qcom,model = "msm8974-taiko-snd-card";

	qcom,audio-routing =
		"RX_BIAS", "MCLK",
		"LDO_H", "MCLK",
		"HEADPHONE", "LDO_H",
		"Ext Spk Bottom Pos", "LINEOUT1",
		"Ext Spk Bottom Neg", "LINEOUT3",
		"Ext Spk Top Pos", "LINEOUT2",
		"Ext Spk Top Neg", "LINEOUT4",
		"AMIC1", "MIC BIAS1 Internal1",
		"MIC BIAS1 Internal1", "Handset Mic",
		"AMIC2", "MIC BIAS2 External",
		"MIC BIAS2 External", "Headset Mic",
		"AMIC3", "MIC BIAS3 Internal1",
		"MIC BIAS3 Internal1", "ANCRight Headset Mic",
		"AMIC4", "MIC BIAS1 Internal2",
		"MIC BIAS1 Internal2", "ANCLeft Headset Mic",
		"DMIC1", "MIC BIAS1 External",
		"MIC BIAS1 External", "Digital Mic1",
		"DMIC2", "MIC BIAS1 External",
		"MIC BIAS1 External", "Digital Mic2",
		"DMIC3", "MIC BIAS3 External",
		"MIC BIAS3 External", "Digital Mic3",
		"DMIC4", "MIC BIAS3 External",
		"MIC BIAS3 External", "Digital Mic4",
		"DMIC5", "MIC BIAS4 External",
		"MIC BIAS4 External", "Digital Mic5",
		"DMIC6", "MIC BIAS4 External",
		"MIC BIAS4 External", "Digital Mic6";

	qcom,cdc-mclk-gpios = <&pm8941_gpios 15 0>;
	qcom,taiko-mclk-clk-freq = <9600000>;
	qcom,us-euro-gpios = <&pm8941_gpios 20 0>;

	qcom,hdmi-audio-rx;
	qcom,ext-ult-lo-amp-gpio = <&pm8941_gpios 6 0>;

	qcom,ext-mclk-gpio  = <&msmgpio 47 0>;
	qcom,dock-plug-det-irq = <&pm8841_mpps 2 0>;
	qcom,prim-auxpcm-gpio-clk  = <&msmgpio 65 0>;
	qcom,prim-auxpcm-gpio-sync = <&msmgpio 66 0>;
	qcom,prim-auxpcm-gpio-din  = <&msmgpio 67 0>;
	qcom,prim-auxpcm-gpio-dout = <&msmgpio 68 0>;
	qcom,prim-auxpcm-gpio-set = "prim-gpio-prim";
	qcom,sec-auxpcm-gpio-clk  = <&msmgpio 79 0>;
	qcom,sec-auxpcm-gpio-sync = <&msmgpio 80 0>;
	qcom,sec-auxpcm-gpio-din  = <&msmgpio 81 0>;
	qcom,sec-auxpcm-gpio-dout = <&msmgpio 82 0>;
	qcom,mbhc-audio-jack-type = "4-pole-jack";
};

* msm-dai-mi2s

[First Level Nodes]

Required properties:

 - compatible : "msm-dai-mi2s"

 [Second Level Nodes]

Required properties:

 - compatible : "qcom,msm-dai-q6-mi2s"
 - qcom,msm-dai-q6-mi2s-dev-id: MSM or MDM can use Slimbus or I2S interface to
				transfer data to (WCD9XXX) codec.
				If slimbus interface is used then "msm-dai-q6"
				needs to be filled with correct data for
				slimbus interface.
				The sections "msm-dai-mi2s" is used by MDM or
				MSM to use I2S interface with codec.
				This section is used by CPU driver in ASOC MSM
				to configure MI2S interface. MSM internally
				has multiple MI2S namely Primary, Secondary,
				Tertiary and Quaternary MI2S.
				They are represented with id 0, 1, 2, 3
				respectively.
				The field "qcom,msm-dai-q6-mi2s-dev-id"
				represents which of the MI2S block is used.
				These MI2S are connected to I2S interface.

 - qcom,msm-mi2s-rx-lines:	Each MI2S interface in MSM has one or more SD
				lines. These lines are used for data transfer
				between codec and MSM.
				This element in indicates which output RX lines
				are used in the MI2S interface.

 - qcom,msm-mi2s-tx-lines:  	Each MI2S interface in MSM has one or more SD
				lines. These lines are used for data transfer
				between codec and MSM.
				This element in indicates which input TX lines
				are used in the MI2S interface.

Optional properties:

- pinctrl-names:		Pinctrl state names for each pin group
				configuration.
- pinctrl-x: 			Defines pinctrl state for each pin group

Example:

qcom,msm-dai-mi2s {
		compatible = "qcom,msm-dai-mi2s";
		qcom,msm-dai-q6-mi2s-prim {
			compatible = "qcom,msm-dai-q6-mi2s";
			qcom,msm-dai-q6-mi2s-dev-id = <0>;
			qcom,msm-mi2s-rx-lines = <2>;
			qcom,msm-mi2s-tx-lines = <1>;
			pinctrl-names = "default", "idle";
			pinctrl-0 = <&tert_mi2s_active &tert_mi2s_sd0_active>;
			pinctrl-1 = <&tert_mi2s_sleep &tert_mi2s_sd0_sleep>;
		};
};

* msm-adsp-loader

Required properties:
 - compatible : "qcom,adsp-loader"
 - qcom,adsp-state:
	It is possible that some MSM use PIL to load the ADSP image. While
	other MSM may use SBL to load the ADSP image at boot. Audio APR needs
	state of ADSP to register and enable APR to be used for sending commands
	to ADSP. so adsp-state represents the state of ADSP to ADSP loader.
	Value of 0 indicates ADSP loader needs to use PIL and value of 2 means
	ADSP image is already loaded by SBL.

Optional properties:
 - qcom,proc-img-to-load;
	This property can be used to override default ADSP
	loading by PIL. Based on string input, different proc is
	loaded. Right now we are adding option "modem"
	for 8916 purpose. Default image will be "adsp" which
	will load LPASS Q6 for other targets as expected.
	"adsp" option need not be explicitly mentioned in
	DTSI file, as it is default option.

Example:

qcom,msm-adsp-loader {
	compatible = "qcom,adsp-loader";
	qcom,adsp-state = <2>;
	qcom,proc-img-to-load = "modem";
};

* msm-audio-ion

Required properties:
 - compatible : "qcom,msm-audio-ion"

Optional properties:
 - qcom,smmu-version:
	version ID to provide info regarding smmu version
	used in chipset. If ARM SMMU HW - use id value as 1,
	If QSMMU HW - use id value as 2.

 - qcom,smmu-sid-mask:
	Mask for the Stream ID part of SMMU SID.

 - qcom,smmu-enabled:
        It is possible that some MSM have SMMU in ADSP.  While other MSM use
	no SMMU. Audio lib introduce wrapper for ION APIs. The wrapper needs
        presence of SMMU in ADSP to handle ION APIs differently.
        Presence of this property means ADSP has SMMU in it.
 - iommus:
	A phandle parsed by smmu driver. Number of entries will vary across
	targets.

Example:

qcom,msm-audio-ion {
	compatible = "qcom,msm-audio-ion;
	qcom,smmu-enabled;
};

* msm-dai-tdm

[First Level Nodes]

Required properties:

 - compatible : "qcom,msm-dai-tdm"
 - qcom,msm-cpudai-tdm-group-id: ID of the group device. TDM interface
				supports up to 8 groups:
				Primary RX: 	37120
				Primary TX: 	37121
				Secondary RX: 	37136
				Secondary TX: 	37137
				Tertiary RX: 	37152
				Tertiary TX: 	37153
				Quaternary RX: 	37168
				Quaternary TX: 	37169

 - qcom,msm-cpudai-tdm-group-num-ports:	Number of ports in
				msm-cpudai-tdm-group-port-id array.
				Max number of ports supported by DSP is 8.

 - qcom,msm-cpudai-tdm-group-port-id: Array of TDM port IDs of the group.
				The size of the array is determined by
				the value in msm-cpudai-tdm-group-num-ports.
				Each group supports up to 8 ports:
				Primary RX: 	36864, 36866, 36868, 36870,
								36872, 36874, 36876, 36878
				Primary TX: 	36865, 36867, 36869, 36871,
								36873, 36875, 36877, 36879
				Secondary RX: 	36880, 36882, 36884, 36886,
								36888, 36890, 36892, 36894
				Secondary TX:	36881, 36883, 36885, 36887,
								36889, 36891, 36893, 36895
				Tertiary RX: 	36896, 36898, 36900, 36902,
								36904, 36906, 36908, 36910
				Tertiary TX: 	36897, 36899, 36901, 36903,
								36905, 36907, 36909, 36911
				Quaternary RX:	36912, 36914, 36916, 36918,
								36920, 36922, 36924, 36926
				Quaternary TX:	36913, 36915, 36917, 36919,
								36921, 36923, 36925, 36927

 - qcom,msm-cpudai-tdm-clk-rate: Clock rate for tdm - 12288000.
				When clock rate is set to zero,
				then external clock is assumed.

 - qcom,msm-cpudai-tdm-afe-ebit-unsupported: Notify if ebit
				setting is needed.When this is
				set, along with clock rate as
				zero, then afe is not configured
				for clock.

 - qcom,msm-cpudai-tdm-sec-port-enable: For chipsets with the
				limitation where we need to enable
				both RX and TX AFE ports, this flag
				is used to enable TX/RX port for
				RX/TX streams.

 - qcom,msm-cpudai-tdm-clk-internal: Clock Source.
				0 - EBIT clock from clk tree
				1 - IBIT clock from clk tree

 - qcom,msm-cpudai-tdm-sync-mode: Synchronization setting.
				0 - Short sync bit mode
				1 - Long sync mode
				2 - Short sync slot mode

 - qcom,msm-cpudai-tdm-sync-src: Synchronization source.
				0 - External source
				1 - Internal source

 - qcom,msm-cpudai-tdm-data-out: Data out signal to drive with other masters.
				0 - Disable
				1 - Enable

 - qcom,msm-cpudai-tdm-invert-sync: Invert the sync.
				0 - Normal
				1 - Invert

 - qcom,msm-cpudai-tdm-data-delay: Number of bit clock to delay data
				with respect to sync edge.
				0 - 0 bit clock cycle
				1 - 1 bit clock cycle
				2 - 2 bit clock cycle

 [Second Level Nodes]

Required properties:

 - compatible : "qcom,msm-dai-q6-tdm"
 - qcom,msm-dai-q6-mi2s-dev-id: TDM port ID.

 - qcom,msm-cpudai-tdm-data-align: Indicate how data is packed
				within the slot. For example, 32 slot width in case of
				sample bit width is 24.
				0 - MSB
				1 - LSB

Optional properties:

 - qcom,msm-cpudai-tdm-header-start-offset: TDM Custom header start offset
				in bytes from this sub-frame. The bytes is counted from 0.
				0 is mapped to the 1st byte in or out of
				the digital serial data line this sub-frame belong to.
				Supported value: 0, 4, 8.

 - qcom,msm-cpudai-tdm-header-width: Header width per frame followed.
				2 bytes for MOST/TDM case.
				Supported value: 2.

 - qcom,msm-cpudai-tdm-header-num-frame-repeat: Number of header followed.
				Supported value: 8.

 - pinctrl-names: Pinctrl state names for each pin group
				configuration.

 - pinctrl-x: Defines pinctrl state for each pin group.

Example:

	qcom,msm-dai-tdm-quat-rx {
		compatible = "qcom,msm-dai-tdm";
		qcom,msm-cpudai-tdm-group-id = <37168>;
		qcom,msm-cpudai-tdm-group-num-ports = <1>;
		qcom,msm-cpudai-tdm-group-port-id = <36912>;
		qcom,msm-cpudai-tdm-clk-rate = <12288000>;
		qcom,msm-cpudai-tdm-clk-internal = <1>;
		qcom,msm-cpudai-tdm-sync-mode = <0>;
		qcom,msm-cpudai-tdm-sync-src = <1>;
		qcom,msm-cpudai-tdm-data-out = <0>;
		qcom,msm-cpudai-tdm-invert-sync = <0>;
		qcom,msm-cpudai-tdm-data-delay = <0>;
		pinctrl-names = "default", "sleep";
		pinctrl-0 = <&quat_tdm_active &quat_tdm_dout_active>;
		pinctrl-1 = <&quat_tdm_sleep &quat_tdm_dout_sleep>;
		dai_quat_tdm_rx_0: qcom,msm-dai-q6-tdm-quat-rx-0 {
			compatible = "qcom,msm-dai-q6-tdm";
			qcom,msm-cpudai-tdm-dev-id = <36912>;
			qcom,msm-cpudai-tdm-data-align = <0>;
			qcom,msm-cpudai-tdm-header-start-offset = <0>;
			qcom,msm-cpudai-tdm-header-width = <2>;
			qcom,msm-cpudai-tdm-header-num-frame-repeat = <8>;
		};
	};

* MSM8996 ASoC Machine driver

Required properties:
- compatible : "qcom,msm8996-asoc-snd-tomtom" for tomtom codec and
		node is "sound" and "qcom,msm8996-asoc-snd-tasha"
		for tasha codec and node is "sound-9335"
- qcom,model : The user-visible name of this sound card.
- qcom,tomtom-mclk-clk-freq : MCLK frequency value for tomtom codec
			      and node is "sound"
- qcom,tasha-mclk-clk-freq : MCLK frequency value for tasha codec
			     and node is "sound-9335"
- qcom,audio-routing : A list of the connections between audio components.
- asoc-platform: This is phandle list containing the references to platform device
		 nodes that are used as part of the sound card dai-links.
- asoc-platform-names: This property contains list of platform names. The order of
		       the platform names should match to that of the phandle order
		       given in "asoc-platform".
- asoc-cpu: This is phandle list containing the references to cpu dai device nodes
	    that are used as part of the sound card dai-links.
- asoc-cpu-names: This property contains list of cpu dai names. The order of the
		  cpu dai names should match to that of the phandle order given
		  in "asoc-cpu". The cpu names are in the form of "%s.%d" form,
		  where the id (%d) field represents the back-end AFE port id that
		  this CPU dai is associated with.
- asoc-codec: This is phandle list containing the references to codec dai device
	      nodes that are used as part of the sound card dai-links.
- asoc-codec-names: This property contains list of codec dai names. The order of the
		    codec dai names should match to that of the phandle order given
		    in "asoc-codec".
Optional properties:
- qcom,ext-ult-spk-amp-gpio : GPIO to enable ultrasound emitter amp.
- qcom,mbhc-audio-jack-type : String to indicate the jack type on the hardware.
		Possible Values:
		4-pole-jack : Jack on the hardware is 4-pole.
		5-pole-jack : Jack on the hardware is 5-pole.
		6-pole-jack : Jack on the hardware is 6-pole.
- clock-names : clock name defined for external clock.
- clocks : external clock defined for codec clock.
- qcom,hph-en1-gpio : GPIO to enable HiFi amplifiers.
- qcom,hph-en0-gpio : GPIO to enable HiFi audio route to headset.
- qcom,wsa-max-devs : Maximum number of WSA881x devices present in the target
- qcom,wsa-devs : List of phandles for all possible WSA881x devices supported for the target
- qcom,wsa-aux-dev-prefix : Name prefix with Left/Right configuration for WSA881x device

Example:

	sound {
	compatible = "qcom,msm8996-asoc-snd";
	qcom,model = "msm8996-tomtom-snd-card";

	qcom,audio-routing =
		"RX_BIAS", "MCLK",
		"LDO_H", "MCLK",
		"AIF4 MAD", "MCLK",
		"ultrasound amp", "LINEOUT1",
		"ultrasound amp", "LINEOUT3",
		"AMIC1", "MIC BIAS1 Internal1",
		"MIC BIAS1 Internal1", "Handset Mic",
		"AMIC2", "MIC BIAS2 External",
		"MIC BIAS2 External", "Headset Mic",
		"AMIC3", "MIC BIAS2 External",
		"MIC BIAS2 External", "ANCRight Headset Mic",
		"AMIC4", "MIC BIAS2 External",
		"MIC BIAS2 External", "ANCLeft Headset Mic",
		"DMIC1", "MIC BIAS1 External",
		"MIC BIAS1 External", "Digital Mic1",
		"DMIC2", "MIC BIAS1 External",
		"MIC BIAS1 External", "Digital Mic2",
		"DMIC3", "MIC BIAS3 External",
		"MIC BIAS3 External", "Digital Mic3",
		"DMIC4", "MIC BIAS3 External",
		"MIC BIAS3 External", "Digital Mic4",
		"DMIC5", "MIC BIAS4 External",
		"MIC BIAS4 External", "Digital Mic5",
		"DMIC6", "MIC BIAS4 External",
		"MIC BIAS4 External", "Digital Mic6";

	clock-names = "osr_clk";
	clocks = <&clock_rpm clk_div_clk1>;
	qcom,mbhc-audio-jack-type = "6-pole-jack";
		asoc-platform = <&pcm0>, <&pcm1>, <&pcm2>, <&voip>, <&voice>,
				<&loopback>, <&compress>, <&hostless>,
				<&afe>, <&lsm>, <&routing>, <&cpe>, <&compr>, <&cpe3>;
		asoc-platform-names = "msm-pcm-dsp.0", "msm-pcm-dsp.1", "msm-pcm-dsp.2",
				"msm-voip-dsp", "msm-pcm-voice", "msm-pcm-loopback",
				"msm-compress-dsp", "msm-pcm-hostless", "msm-pcm-afe",
				"msm-lsm-client", "msm-pcm-routing", "msm-cpe-lsm",
				"msm-compr-dsp", "msm-cpe-lsm.3";
		asoc-cpu = <&dai_pri_auxpcm>, <&dai_sec_auxpcm>, <&dai_hdmi>, <&dai_mi2s>,
				<&sb_0_rx>, <&sb_0_tx>, <&sb_1_rx>, <&sb_1_tx>,
				<&sb_2_rx>, <&sb_2_tx>, <&sb_3_rx>, <&sb_3_tx>,
				<&sb_4_rx>, <&sb_4_tx>, <&sb_5_tx>, <&afe_pcm_rx>,
				<&afe_pcm_tx>, <&afe_proxy_rx>, <&afe_proxy_tx>,
				<&incall_record_rx>, <&incall_record_tx>,
				<&incall_music_rx>, <&incall_music2_rx>;
		asoc-cpu-names = "msm-dai-q6-auxpcm.1", "msm-dai-q6-auxpcm.2",
				"msm-dai-q6-hdmi.8", "msm-dai-q6-mi2s.2",
				"msm-dai-q6-dev.16384", "msm-dai-q6-dev.16385",
				"msm-dai-q6-dev.16386", "msm-dai-q6-dev.16387",
				"msm-dai-q6-dev.16388", "msm-dai-q6-dev.16389",
				"msm-dai-q6-dev.16390", "msm-dai-q6-dev.16391",
				"msm-dai-q6-dev.16392", "msm-dai-q6-dev.16393",
				"msm-dai-q6-dev.16395", "msm-dai-q6-dev.224",
				"msm-dai-q6-dev.225", "msm-dai-q6-dev.241",
				"msm-dai-q6-dev.240", "msm-dai-q6-dev.32771",
				"msm-dai-q6-dev.32772", "msm-dai-q6-dev.32773",
				"msm-dai-q6-dev.32770";
		asoc-codec = <&stub_codec>;
		asoc-codec-names = "msm-stub-codec.1";
		qcom,wsa-max-devs = <2>;
		qcom,wsa-devs = <&wsa881x_211>, <&wsa881x_212>,
				<&wsa881x_213>, <&wsa881x_214>;
		qcom,wsa-aux-dev-prefix = "SpkrRight", "SpkrLeft",
					  "SpkrRight", "SpkrLeft";
	};

* MSM8909 ASoC Machine driver

Required properties:
- compatible : "qcom,msm8909-audio-codec"
- qcom,model : The user-visible name of this sound card.
- reg : Offset and length of the register region(s) for MI2S/PCM MUX
- reg-names : Register region name(s) referenced in reg above
	 Required register resource entries are:
	 "csr_gp_io_mux_mic_ctl": Physical address of MUX that controls
				controls LPA IF tertiary, quad, PCM0, Digital Codec
				and Secondary TLMM mux setting for mic path operation.
	 "csr_gp_io_mux_spkr_ctl": Physical address of MUX that controls
				IF primary, secondary, Digital Codec and Primary TLMM
				setting for speaker path operation.
	 "csr_gp_io_lpaif_pri_pcm_pri_mode_muxsel": Physical address of MUX
				that controls the mux between LPA IF Quad and PCM0
				path to secondary TLMM
- qcom,msm-hs-micbias-type : This property is used to recognize the headset
  micbias type, internal or external.
- qcom,msm-ext-pa : This property is used to inform machine driver about
  the connection of external PA over available MI2S interfaces,
  following values can be given to this property.
  primary -> Primary MI2S interface
  secondary -> Secondary MI2S interface
  tertiary -> Tertiary MI2S interface
  quaternary -> Quaternary MI2S interface
- qcom,msm-mbhc-hphl-swh: This property is used to distinguish headset HPHL
switch type on target typically the switch type will be normally open or
normally close, value for this property 0 for normally close and 1 for
normally open.
-  qcom,msm-mbhc-gnd-swh: This property is used to distinguish headset GND
switch type on target typically the switch type will be normally open or
normally close, value for this property 0 for normally close and 1 for
normally open.
- qcom,audio-routing : A list of the connections between audio components.
- qcom,msm-gpios : Lists down all the gpio sets that are supported.
- qcom,pinctrl-names : Lists all the possible combinations of the gpio sets
mentioned in qcom,msm-gpios.
- pinctrl-names : The combinations of gpio sets from above that are supported in
the flavor.
- pinctrl-# : Pinctrl states as mentioned in pinctrl-names.

Optional properties:
- qcom,msm-afe-clk-ver: Provides detail of AFE clock API version.
- qcom,hdmi-dba-codec-rx: Boolean. specifies if HDMI DBA audio support is enabled or not.
- qcom,split-a2dp: Boolean. specifies if split a2dp audio support is enabled or not.
- qcom,prim-auxpcm-gpio-clk  : GPIO on which Primary AUXPCM clk signal is coming.
- qcom,prim-auxpcm-gpio-sync : GPIO on which Primary AUXPCM SYNC signal is coming.
- qcom,prim-auxpcm-gpio-din  : GPIO on which Primary AUXPCM DIN signal is coming.
- qcom,prim-auxpcm-gpio-dout : GPIO on which Primary AUXPCM DOUT signal is coming.
- qcom,prim-auxpcm-gpio-set : set of GPIO lines used for Primary AUXPCM port
- qcom,cdc-us-euro-gpios : GPIO on which gnd/mic swap signal is coming.
- qcom,msm-micbias1-ext-cap : Boolean. Enable micbias1 external
capacitor mode.
- qcom,msm-micbias2-ext-cap : Boolean. Enable micbias2 external
capacitor mode.
- qcom,msm-spk-ext-pa : GPIO which enables external speaker pa.
- qcom,subsys-name: This value provides the subsystem name where codec
		is present. This property enables the codec driver to
		register and receive subsytem restart notification from subsystem
		and follow appropriate steps to ensure codec is in proper state
		after subsytem restart. By default codec driver register
		with ADSP subsystem.

To Configure External Audio Switch
- qcom,msm-ext-audio-switch : GPIO which controls external switch that switches
  audio path between headset and speakers.
- ext-switch-vdd-supply : Power supply that control external audio switch
- qcom,ext-switch-vdd-voltage : Minimum and maximum voltage in uV to set for
  power supply.
- qcom,ext-switch-vdd-op-mode : Maxmum # of uA current the switch will draw
  from the power supply.
Example:
	qcom,msm-ext-audio-switch = <&msm_gpio 2 0>; - gpio # and active_state
	ext-switch-vdd-supply = <&pm8950_l13>; - Power Rail
	qcom,ext-switch-vdd-voltage = <3075000 3075000>; - Min, Max uV voltage
	qcom,ext-switch-vdd-op-mode = <5000>; - Operational current uA
	Additional needs to add two additional qcom,audio-routings
			"HEADPHONE", "VDD_EXT_AUDIO_SWITCH"
			"SPK_OUT", "VDD_EXT_AUDIO_SWITCH"

- qcom,msm-mclk-freq : This property is used to inform machine driver about
mclk frequency needs to be configured for internal and external PA.
- asoc-platform: This is phandle list containing the references to platform device
		 nodes that are used as part of the sound card dai-links.
- asoc-platform-names: This property contains list of platform names. The order of
		       the platform names should match to that of the phandle order
		       given in "asoc-platform".
- asoc-cpu: This is phandle list containing the references to cpu dai device nodes
	    that are used as part of the sound card dai-links.
- asoc-cpu-names: This property contains list of cpu dai names. The order of the
		  cpu dai names should match to that of the phandle order given.
- asoc-codec: This is phandle list containing the references to codec dai device
	nodes that are used as part of the sound card dai-links.
- asoc-codec-names: This property contains list of codec dai names. The order of the
	codec dai names should match to that of the phandle order given
	in "asoc-codec".
- asoc-wsa-codec-names: This property contains list of wsa codec names. The names
		  should comply with the wsa nodes configurations.
- asoc-wsa-codec-prefixes: This property contains list of wsa codec prefixes.
- msm-vdd-wsa-switch-supply: WSA codec supply's regulator device tree node.
- qcom,msm-vdd-wsa-switch-voltage: WSA codec supply's voltage level in mV.
- qcom,msm-vdd-wsa-switch-current: WSA codec max current level in mA.

Example:
	 sound {
		compatible = "qcom,msm8909-audio-codec";
		qcom,model = "msm8909-snd-card";
		reg = <0xc051000 0x4>,
		      <0xc051004 0x4>,
		      <0xc055000 0x4>;
		reg-names = "csr_gp_io_mux_mic_ctl",
			    "csr_gp_io_mux_spkr_ctl",
			    "csr_gp_io_lpaif_pri_pcm_pri_mode_muxsel";
		qcom,msm-afe-clk-ver = <1>;
		qcom,msm-ext-pa = "primary";
		qcom,hdmi-dba-codec-rx;
		qcom,split-a2dp;
		qcom,msm-mclk-freq = <9600000>;
		qcom,msm-mbhc-hphl-swh = <0>;
		qcom,msm-mbhc-gnd-swh = <0>;
		qcom,msm-hs-micbias-type = "internal";
		qcom,msm-micbias1-ext-cap;
		qcom,audio-routing =
			"RX_BIAS", "MCLK",
			"SPK_RX_BIAS", "MCLK",
			"INT_LDO_H", "MCLK",
			"MIC BIAS External", "Handset Mic",
			"MIC BIAS Internal2", "Headset Mic",
			"MIC BIAS External", "Secondary Mic",
			"AMIC1", "MIC BIAS External",
			"AMIC2", "MIC BIAS Internal2",
			"AMIC3", "MIC BIAS External";
		qcom,msm-gpios =
			"pri_i2s",
			"us_eu_gpio";
		qcom,pinctrl-names =
			"all_off",
			"pri_i2s_act",
			"us_eu_gpio_act",
			"pri_i2s_us_eu_gpio_act";
		pinctrl-names =
			"all_off",
			"pri_i2s_act",
			"us_eu_gpio_act",
			"pri_i2s_us_eu_gpio_act";
		pinctrl-0 = <&cdc_pdm_lines_sus &cdc_pdm_lines_2_sus &cross_conn_det_sus>;
		pinctrl-1 = <&cdc_pdm_lines_act &cdc_pdm_lines_2_act &cross_conn_det_sus>;
		pinctrl-2 = <&cdc_pdm_lines_sus &cdc_pdm_lines_2_sus &cross_conn_det_act>;
		pinctrl-3 = <&cdc_pdm_lines_act &cdc_pdm_lines_2_act &cross_conn_det_act>;
		qcom,cdc-us-euro-gpios = <&msm_gpio 63 0>;
		qcom,prim-auxpcm-gpio-clk  = <&msm_gpio 63 0>;
		qcom,prim-auxpcm-gpio-sync = <&msm_gpio 64 0>;
		qcom,prim-auxpcm-gpio-din  = <&msm_gpio 65 0>;
		qcom,prim-auxpcm-gpio-dout = <&msm_gpio 66 0>;
		qcom,prim-auxpcm-gpio-set = "prim-gpio-prim";
		qcom,tapan-codec-9302;
		asoc-platform = <&pcm0>, <&pcm1>, <&voip>, <&voice>,
				<&loopback>, <&compress>, <&hostless>,
				<&afe>, <&lsm>, <&routing>, <&lpa>;
		asoc-platform-names = "msm-pcm-dsp.0", "msm-pcm-dsp.1",
				"msm-voip-dsp", "msm-pcm-voice", "msm-pcm-loopback",
				"msm-compress-dsp", "msm-pcm-hostless", "msm-pcm-afe",
				"msm-lsm-client", "msm-pcm-routing", "msm-pcm-lpa";
		asoc-cpu = <&dai_pri_auxpcm>, <&dai_hdmi>,
				<&dai_mi2s0>, <&dai_mi2s1>, <&dai_mi2s2>, <&dai_mi2s3>,
				<&sb_0_rx>, <&sb_0_tx>, <&sb_1_rx>, <&sb_1_tx>,
				<&sb_3_rx>, <&sb_3_tx>, <&sb_4_rx>, <&sb_4_tx>,
				<&bt_sco_rx>, <&bt_sco_tx>, <&int_fm_rx>, <&int_fm_tx>,
				<&afe_pcm_rx>, <&afe_pcm_tx>, <&afe_proxy_rx>, <&afe_proxy_tx>,
				<&incall_record_rx>, <&incall_record_tx>, <&incall_music_rx>,
				<&incall_music_2_rx>;
		asoc-cpu-names = "msm-dai-q6-auxpcm.1", "msm-dai-q6-hdmi.8",
				"msm-dai-q6-mi2s.0", "msm-dai-q6-mi2s.1",
				"msm-dai-q6-mi2s.2", "msm-dai-q6-mi2s.3",
				"msm-dai-q6-dev.16384", "msm-dai-q6-dev.16385",
				"msm-dai-q6-dev.16386", "msm-dai-q6-dev.16387",
				"msm-dai-q6-dev.16390", "msm-dai-q6-dev.16391",
				"msm-dai-q6-dev.16392", "msm-dai-q6-dev.16393",
				"msm-dai-q6-dev.12288", "msm-dai-q6-dev.12289",
				"msm-dai-q6-dev.12292", "msm-dai-q6-dev.12293",
				"msm-dai-q6-dev.224", "msm-dai-q6-dev.225",
				"msm-dai-q6-dev.241", "msm-dai-q6-dev.240",
				"msm-dai-q6-dev.32771", "msm-dai-q6-dev.32772",
				"msm-dai-q6-dev.32773", "msm-dai-q6-dev.32770";
		asoc-codec = <&stub>, <&pm8916_tombak_dig>;
		asoc-codec-names = "msm-stub-codec.1", "tombak_codec";
		asoc-wsa-codec-names = "wsa881x-i2c-codec.8-000f";
		asoc-wsa-codec-prefixes = "SpkrMono";
	};

* MSM8952 ASoC Machine driver

Required properties:
- compatible : "qcom,msm8952-audio-codec" for pmic codec,
				"qcom,msm8952-dig-asoc-snd" for digital internal codec,
- qcom,model : The user-visible name of this sound card.
- reg : Offset and length of the register region(s) for MI2S/PCM MUX
- reg-names : Register region name(s) referenced in reg above
	 Required register resource entries are:
	 "csr_gp_io_mux_mic_ctl": Physical address of MUX that controls
				controls LPA IF tertiary, quad, PCM0, Digital Codec
				and Secondary TLMM mux setting for mic path operation.
	 "csr_gp_io_mux_spkr_ctl": Physical address of MUX that controls
				IF primary, secondary, Digital Codec and Primary TLMM
				setting for speaker path operation.
	 "csr_gp_io_lpaif_pri_pcm_pri_mode_muxsel": Physical address of MUX
				that controls the mux between LPA IF Quad and PCM0
				path to secondary TLMM
- qcom,msm-hs-micbias-type : This property is used to recognize the headset
  micbias type, internal or external.
- qcom,msm-ext-pa : This property is used to inform machine driver about
  the connection of external PA over available MI2S interfaces,
  following values can be given to this property.
  primary -> Primary MI2S interface
  secondary -> Secondary MI2S interface
  tertiary -> Tertiary MI2S interface
  quaternary -> Quaternary MI2S interface
- qcom,msm-mbhc-hphl-swh: This property is used to distinguish headset HPHL
switch type on target typically the switch type will be normally open or
normally close, value for this property 0 for normally close and 1 for
normally open.
-  qcom,msm-mbhc-gnd-swh: This property is used to distinguish headset GND
switch type on target typically the switch type will be normally open or
normally close, value for this property 0 for normally close and 1 for
normally open.
- qcom,audio-routing : A list of the connections between audio components.
- qcom,msm-gpios : Lists down all the gpio sets that are supported.
- qcom,pinctrl-names : Lists all the possible combinations of the gpio sets
mentioned in qcom,msm-gpios.
- pinctrl-names : The combinations of gpio sets from above that are supported in
the flavor.
- pinctrl-# : Pinctrl states as mentioned in pinctrl-names.

Optional properties:
- qcom,prim-auxpcm-gpio-clk  : GPIO on which Primary AUXPCM clk signal is coming.
- qcom,prim-auxpcm-gpio-sync : GPIO on which Primary AUXPCM SYNC signal is coming.
- qcom,prim-auxpcm-gpio-din  : GPIO on which Primary AUXPCM DIN signal is coming.
- qcom,prim-auxpcm-gpio-dout : GPIO on which Primary AUXPCM DOUT signal is coming.
- qcom,prim-auxpcm-gpio-set : set of GPIO lines used for Primary AUXPCM port
- qcom,cdc-us-euro-gpios : GPIO on which gnd/mic swap signal is coming.
- qcom,msm-micbias1-ext-cap : Boolean. Enable micbias1 external
capacitor mode.
- qcom,msm-micbias2-ext-cap : Boolean. Enable micbias2 external
capacitor mode.
- qcom,msm-spk-ext-pa : GPIO which enables external speaker pa.

To Configure External Audio Switch
- qcom,msm-ext-audio-switch : GPIO which controls external switch that switches
  audio path between headset and speakers.
- ext-switch-vdd-supply : Power supply that control external audio switch
- qcom,ext-switch-vdd-voltage : Minimum and maximum voltage in uV to set for
  power supply.
- qcom,ext-switch-vdd-op-mode : Maxmum # of uA current the switch will draw
  from the power supply.
Example:
	qcom,msm-ext-audio-switch = <&msm_gpio 2 0>; - gpio # and active_state
	ext-switch-vdd-supply = <&pm8950_l13>; - Power Rail
	qcom,ext-switch-vdd-voltage = <3075000 3075000>; - Min, Max uV voltage
	qcom,ext-switch-vdd-op-mode = <5000>; - Operational current uA
	Additional needs to add two additional qcom,audio-routings
			"HEADPHONE", "VDD_EXT_AUDIO_SWITCH"
			"SPK_OUT", "VDD_EXT_AUDIO_SWITCH"

- qcom,msm-mclk-freq : This property is used to inform machine driver about
mclk frequency needs to be configured for internal and external PA.
- asoc-platform: This is phandle list containing the references to platform device
		 nodes that are used as part of the sound card dai-links.
- asoc-platform-names: This property contains list of platform names. The order of
		       the platform names should match to that of the phandle order
		       given in "asoc-platform".
- asoc-cpu: This is phandle list containing the references to cpu dai device nodes
	    that are used as part of the sound card dai-links.
- asoc-cpu-names: This property contains list of cpu dai names. The order of the
		  cpu dai names should match to that of the phandle order given.
- asoc-codec: This is phandle list containing the references to codec dai device
	nodes that are used as part of the sound card dai-links.
- asoc-codec-names: This property contains list of codec dai names. The order of the
	codec dai names should match to that of the phandle order given
	in "asoc-codec".
- asoc-wsa-codec-names: This property contains list of wsa codec names. The names
		  should comply with the wsa nodes configurations.
- asoc-wsa-codec-prefixes: This property contains list of wsa codec prefixes.
- msm-vdd-wsa-switch-supply: WSA codec supply's regulator device tree node.
- qcom,msm-vdd-wsa-switch-voltage: WSA codec supply's voltage level in mV.
- qcom,msm-vdd-wsa-switch-current: WSA codec max current level in mA.

Example:
	 sound {
		compatible = "qcom,msm8952-audio-codec";
		qcom,model = "msm8952-snd-card";
		reg = <0xc051000 0x4>,
		      <0xc051004 0x4>,
		      <0xc055000 0x4>;
		reg-names = "csr_gp_io_mux_mic_ctl",
			    "csr_gp_io_mux_spkr_ctl",
			    "csr_gp_io_lpaif_pri_pcm_pri_mode_muxsel";
		qcom,msm-ext-pa = "primary";
		qcom,msm-mclk-freq = <9600000>;
		qcom,msm-mbhc-hphl-swh = <0>;
		qcom,msm-mbhc-gnd-swh = <0>;
		qcom,msm-hs-micbias-type = "internal";
		qcom,msm-micbias1-ext-cap;
		qcom,audio-routing =
			"RX_BIAS", "MCLK",
			"SPK_RX_BIAS", "MCLK",
			"INT_LDO_H", "MCLK",
			"MIC BIAS External", "Handset Mic",
			"MIC BIAS Internal2", "Headset Mic",
			"MIC BIAS External", "Secondary Mic",
			"AMIC1", "MIC BIAS External",
			"AMIC2", "MIC BIAS Internal2",
			"AMIC3", "MIC BIAS External";
		qcom,msm-gpios =
			"pri_i2s",
			"us_eu_gpio";
		qcom,pinctrl-names =
			"all_off",
			"pri_i2s_act",
			"us_eu_gpio_act",
			"pri_i2s_us_eu_gpio_act";
		pinctrl-names =
			"all_off",
			"pri_i2s_act",
			"us_eu_gpio_act",
			"pri_i2s_us_eu_gpio_act";
		pinctrl-0 = <&cdc_pdm_lines_sus &cdc_pdm_lines_2_sus &cross_conn_det_sus>;
		pinctrl-1 = <&cdc_pdm_lines_act &cdc_pdm_lines_2_act &cross_conn_det_sus>;
		pinctrl-2 = <&cdc_pdm_lines_sus &cdc_pdm_lines_2_sus &cross_conn_det_act>;
		pinctrl-3 = <&cdc_pdm_lines_act &cdc_pdm_lines_2_act &cross_conn_det_act>;
		qcom,cdc-us-euro-gpios = <&msm_gpio 63 0>;
		qcom,prim-auxpcm-gpio-clk  = <&msm_gpio 63 0>;
		qcom,prim-auxpcm-gpio-sync = <&msm_gpio 64 0>;
		qcom,prim-auxpcm-gpio-din  = <&msm_gpio 65 0>;
		qcom,prim-auxpcm-gpio-dout = <&msm_gpio 66 0>;
		qcom,prim-auxpcm-gpio-set = "prim-gpio-prim";
		qcom,tapan-codec-9302;
		asoc-platform = <&pcm0>, <&pcm1>, <&voip>, <&voice>,
				<&loopback>, <&compress>, <&hostless>,
				<&afe>, <&lsm>, <&routing>, <&lpa>;
		asoc-platform-names = "msm-pcm-dsp.0", "msm-pcm-dsp.1",
				"msm-voip-dsp", "msm-pcm-voice", "msm-pcm-loopback",
				"msm-compress-dsp", "msm-pcm-hostless", "msm-pcm-afe",
				"msm-lsm-client", "msm-pcm-routing", "msm-pcm-lpa";
		asoc-cpu = <&dai_pri_auxpcm>, <&dai_hdmi>,
				<&dai_mi2s0>, <&dai_mi2s1>, <&dai_mi2s2>, <&dai_mi2s3>,
				<&sb_0_rx>, <&sb_0_tx>, <&sb_1_rx>, <&sb_1_tx>,
				<&sb_3_rx>, <&sb_3_tx>, <&sb_4_rx>, <&sb_4_tx>,
				<&bt_sco_rx>, <&bt_sco_tx>, <&int_fm_rx>, <&int_fm_tx>,
				<&afe_pcm_rx>, <&afe_pcm_tx>, <&afe_proxy_rx>, <&afe_proxy_tx>,
				<&incall_record_rx>, <&incall_record_tx>, <&incall_music_rx>,
				<&incall_music_2_rx>;
		asoc-cpu-names = "msm-dai-q6-auxpcm.1", "msm-dai-q6-hdmi.8",
				"msm-dai-q6-mi2s.0", "msm-dai-q6-mi2s.1",
				"msm-dai-q6-mi2s.2", "msm-dai-q6-mi2s.3",
				"msm-dai-q6-dev.16384", "msm-dai-q6-dev.16385",
				"msm-dai-q6-dev.16386", "msm-dai-q6-dev.16387",
				"msm-dai-q6-dev.16390", "msm-dai-q6-dev.16391",
				"msm-dai-q6-dev.16392", "msm-dai-q6-dev.16393",
				"msm-dai-q6-dev.12288", "msm-dai-q6-dev.12289",
				"msm-dai-q6-dev.12292", "msm-dai-q6-dev.12293",
				"msm-dai-q6-dev.224", "msm-dai-q6-dev.225",
				"msm-dai-q6-dev.241", "msm-dai-q6-dev.240",
				"msm-dai-q6-dev.32771", "msm-dai-q6-dev.32772",
				"msm-dai-q6-dev.32773", "msm-dai-q6-dev.32770";
		asoc-codec = <&stub>, <&pm8916_tombak_dig>;
		asoc-codec-names = "msm-stub-codec.1", "tombak_codec";
		asoc-wsa-codec-names = "wsa881x-i2c-codec.8-000f";
		asoc-wsa-codec-prefixes = "SpkrMono";
	};

* SDM660 ASoC Machine driver

Required properties:
- compatible : "qcom,sdm660-asoc-snd"
- qcom,model : The user-visible name of this sound card.
- qcom,msm-hs-micbias-type : This property is used to recognize the headset
  micbias type, internal or external.
- qcom,msm-mbhc-hphl-swh: This property is used to distinguish headset HPHL
switch type on target typically the switch type will be normally open or
normally close, value for this property 0 for normally close and 1 for
normally open.
-  qcom,msm-mbhc-gnd-swh: This property is used to distinguish headset GND
switch type on target typically the switch type will be normally open or
normally close, value for this property 0 for normally close and 1 for
normally open.
- qcom,audio-routing : A list of the connections between audio components.
- qcom,msm-gpios : Lists down all the gpio sets that are supported.
- qcom,pinctrl-names : Lists all the possible combinations of the gpio sets
mentioned in qcom,msm-gpios.
- pinctrl-names : The combinations of gpio sets from above that are supported in
the flavor.
- pinctrl-# : Pinctrl states as mentioned in pinctrl-names.

Optional properties:
- qcom,cdc-us-euro-gpios : GPIO on which gnd/mic swap signal is coming.
- qcom,msm-micbias1-ext-cap : Boolean. Enable micbias1 external
capacitor mode.
- qcom,msm-micbias2-ext-cap : Boolean. Enable micbias2 external
capacitor mode.
- qcom,wsa-disable : Boolean. Disables WSA speaker dailinks from sound node.
- qcom,msm-spk-ext-pa : GPIO which enables external speaker pa.
- qcom,msm-mclk-freq : This property is used to inform machine driver about
mclk frequency needs to be configured for internal and external PA.
- asoc-platform: This is phandle list containing the references to platform device
		 nodes that are used as part of the sound card dai-links.
- asoc-platform-names: This property contains list of platform names. The order of
		       the platform names should match to that of the phandle order
		       given in "asoc-platform".
- asoc-cpu: This is phandle list containing the references to cpu dai device nodes
	    that are used as part of the sound card dai-links.
- asoc-cpu-names: This property contains list of cpu dai names. The order of the
		  cpu dai names should match to that of the phandle order given.
- asoc-codec: This is phandle list containing the references to codec dai device
	nodes that are used as part of the sound card dai-links.
- asoc-codec-names: This property contains list of codec dai names. The order of the
	codec dai names should match to that of the phandle order given
	in "asoc-codec".
- qcom,wsa-max-devs : Maximum number of WSA881x devices present in the target
- qcom,wsa-devs : List of phandles for all possible WSA881x devices supported for the target
- qcom,wsa-aux-dev-prefix : Name prefix with Left/Right configuration for WSA881x device
- qcom,cdc-pdm-gpios : phandle for pdm gpios.
- qcom,cdc-comp-gpios : phandle for compander gpios.
- qcom,cdc-dmic-gpios : phandle for Digital mic clk and data gpios.
- qcom,cdc-sdw-gpios : phandle for soundwire clk and data gpios.
- qcom,msm-mbhc-moist-cfg: This property is used to set moisture detection
		threshold values for different codecs. First parameter is V(voltage)
		second one is i(current), third one is r (resistance). Depending on the
		codec set corresponding element in array and set others to 0.
- qcom,msm-linein-det-swh: This property is used to distinguish linein jack
	switch type on target typically the switch type will be normally open or
	normally close, value for this property 0 for normally close and 1 for
	normally open.
- qcom,msm-lineout-det-swh: This property is used to distinguish lineout jack
	switch type on target typically the switch type will be normally open or
	normally close, value for this property 0 for normally close and 1 for
	normally open.
- qcom,linein-det-gpio : GPIO on which linein jack insertion/removal interrupt is received.
- qcom,lineout-det-gpio : GPIO on which lineout jack insertion/removal interrupt is received.

Example:
	 sound {
		compatible = "qcom,sdm660-asoc-snd";
		qcom,model = "sdm660-snd-card";
		qcom,msm-mclk-freq = <9600000>;
		qcom,msm-mbhc-hphl-swh = <0>;
		qcom,msm-mbhc-gnd-swh = <0>;
		qcom,msm-hs-micbias-type = "internal";
		qcom,msm-micbias1-ext-cap;
		qcom,audio-routing =
			"RX_BIAS", "MCLK",
			"SPK_RX_BIAS", "MCLK",
			"INT_LDO_H", "MCLK",
			"MIC BIAS External", "Handset Mic",
			"MIC BIAS Internal2", "Headset Mic",
			"MIC BIAS External", "Secondary Mic",
			"AMIC1", "MIC BIAS External",
			"AMIC2", "MIC BIAS Internal2",
			"AMIC3", "MIC BIAS External";
		qcom,cdc-us-euro-gpios = <&msm_gpio 63 0>;
		qcom,cdc-pdm-gpios = <&cdc_pdm_gpios>;
		qcom,cdc-comp-gpios = <&cdc_comp_gpios>;
		qcom,cdc-dmic-gpios = <&cdc_dmic_gpios>;
		qcom,cdc-sdw-gpios = <&cdc_sdw_gpios>;
		asoc-platform = <&pcm0>, <&pcm1>, <&voip>, <&voice>,
				<&loopback>, <&compress>, <&hostless>,
				<&afe>, <&lsm>, <&routing>, <&lpa>;
		asoc-platform-names = "msm-pcm-dsp.0", "msm-pcm-dsp.1",
				"msm-voip-dsp", "msm-pcm-voice", "msm-pcm-loopback",
				"msm-compress-dsp", "msm-pcm-hostless", "msm-pcm-afe",
				"msm-lsm-client", "msm-pcm-routing", "msm-pcm-lpa";
		asoc-cpu = <&dai_pri_auxpcm>, <&dai_hdmi>,
				<&dai_mi2s0>, <&dai_mi2s1>, <&dai_mi2s2>, <&dai_mi2s3>,
				<&sb_0_rx>, <&sb_0_tx>, <&sb_1_rx>, <&sb_1_tx>,
				<&sb_3_rx>, <&sb_3_tx>, <&sb_4_rx>, <&sb_4_tx>,
				<&bt_sco_rx>, <&bt_sco_tx>, <&int_fm_rx>, <&int_fm_tx>,
				<&afe_pcm_rx>, <&afe_pcm_tx>, <&afe_proxy_rx>, <&afe_proxy_tx>,
				<&incall_record_rx>, <&incall_record_tx>, <&incall_music_rx>,
				<&incall_music_2_rx>;
		asoc-cpu-names = "msm-dai-q6-auxpcm.1", "msm-dai-q6-hdmi.8",
				"msm-dai-q6-mi2s.0", "msm-dai-q6-mi2s.1",
				"msm-dai-q6-mi2s.2", "msm-dai-q6-mi2s.3",
				"msm-dai-q6-dev.16384", "msm-dai-q6-dev.16385",
				"msm-dai-q6-dev.16386", "msm-dai-q6-dev.16387",
				"msm-dai-q6-dev.16390", "msm-dai-q6-dev.16391",
				"msm-dai-q6-dev.16392", "msm-dai-q6-dev.16393",
				"msm-dai-q6-dev.12288", "msm-dai-q6-dev.12289",
				"msm-dai-q6-dev.12292", "msm-dai-q6-dev.12293",
				"msm-dai-q6-dev.224", "msm-dai-q6-dev.225",
				"msm-dai-q6-dev.241", "msm-dai-q6-dev.240",
				"msm-dai-q6-dev.32771", "msm-dai-q6-dev.32772",
				"msm-dai-q6-dev.32773", "msm-dai-q6-dev.32770";
		asoc-codec = <&stub_codec>;
		asoc-codec-names = "msm-stub-codec.1";
		qcom,wsa-max-devs = <2>;
		qcom,wsa-devs = <&wsa881x_211>, <&wsa881x_212>,
				<&wsa881x_213>, <&wsa881x_214>;
		qcom,wsa-aux-dev-prefix = "SpkrRight", "SpkrLeft",
					  "SpkrRight", "SpkrLeft";
		qcom,linein-det-swh = <1>;
		qcom,lineout-det-swh = <1>;
		qcom,linein-det-gpio = <&tlmm 124 0>;
		qcom,lineout-det-gpio = <&tlmm 125 0>;
	};

* MSM8952 Slimbus ASoC Machine driver

Required properties:
- compatible : "qcom,msm8952-audio-slimbus-codec"
- qcom,model : The user-visible name of this sound card.
- qcom,pinctrl-names : Lists all the possible combinations of the gpio sets
mentioned in qcom,msm-gpios. Say we have 2^N combinations for N GPIOs,
this would list all the 2^N combinations.
- pinctrl-names : The combinations of gpio sets from above that are supported in
the flavor. This can be sometimes same as qcom, pinctrl-names i.e with 2^N
combinations or will have less incase if some combination is not supported.
- pinctrl-# : Pinctrl states as mentioned in pinctrl-names.
- reg : Offset and length of the register region(s) for MI2S/PCM MUX
- reg-names : Register region name(s) referenced in reg above
	 Required register resource entries are:
	 "csr_gp_io_mux_mic_ctl": Physical address of MUX that controls
				controls LPA IF tertiary, quad, PCM0, Digital Codec
				and Secondary TLMM mux setting for mic path operation.
	 "csr_gp_io_mux_spkr_ctl": Physical address of MUX that controls
				IF primary, secondary, Digital Codec and Primary TLMM
				setting for speaker path operation.
- qcom,cdc-mclk-gpios : GPIO on which mclk signal is coming.
- clock-names : clock name defined for external clock.
- qcom,audio-routing : A list of the connections between audio components.
  Each entry is a pair of strings, the first being the connection's sink,
  the second being the connection's source.

Optional Properties:
- qcom,cdc-us-euro-gpios : GPIO on which gnd/mic swap signal is coming.
- qcom,cdc-vdd-spkr-gpios : GPIO which controls PA for VDD speaker
- qcom,headset-jack-type-NC: Set if the headset jack type is NC (Normally Closed)
- qcom,tomtom-mclk-clk-freq : Tapan mclk Freq in Hz. currently only 9600000Hz
				is supported.
- qcom,msm-ext-pa : This property is used to inform machine driver about
  the connection of external PA over available MI2S interfaces,
  following values can be given to this property.
  primary -> Primary MI2S interface
  secondary -> Secondary MI2S interface
  tertiary -> Tertiary MI2S interface
  quaternary -> Quaternary MI2S interface
- qcom,mi2s-audio-intf: This property is used to inform machine driver
  if mi2s backend dailink has to be added as part of the sound card dai-links.
- qcom,auxpcm-audio-intf: This property is used to inform machine driver
  if auxpcm backend dailink has to be added as part of the sound card dai-links.
- qcom,msm-mi2s-master: This property is used to inform machine driver
  if MSM is the clock master of mi2s. 1 means master and 0 means slave. The
  first entry is primary mi2s; the second entry is secondary mi2s, and so on.
- qcom,mi2s-aqt-enabled: This property is used to inform machine driver
  if AQT1000 codec is enabled or not. If this is enabled then codec name
  for TERT_MI2S needs to be overridden with AQT codec.
- qcom,msm-mi2s-ext-mclk: This property is used to inform machine driver
  if MCLK from MSM is used for any external audio connections. 1 means used
  as external mclk source and 0 indicate not used. The first entry is
  primary mclk; the second entry is secondary mclk, and so on.
- reg: This property provides the AUX PCM/MI2S mux select register addresses
  and size.
- reg_names: This property provides the name of the AUX PCM/MI2S mux select
  registers so the machine driver can retrieve the addresses. The order of the
  names has to match the order of the registers in "reg" property.
- asoc-platform: This is phandle list containing the references to platform device
		 nodes that are used as part of the sound card dai-links.
- asoc-platform-names: This property contains list of platform names. The order of
		       the platform names should match to that of the phandle order
		       given in "asoc-platform".
- asoc-cpu: This is phandle list containing the references to cpu dai device nodes
	    that are used as part of the sound card dai-links.
- asoc-cpu-names: This property contains list of cpu dai names. The order of the
		  cpu dai names should match to that of the phandle order given
		  in "asoc-cpu". The cpu names are in the form of "%s.%d" form,
		  where the id (%d) field represents the back-end AFE port id that
		  this CPU dai is associated with.
- asoc-codec: This is phandle list containing the references to codec dai device
	      nodes that are used as part of the sound card dai-links.
- asoc-codec-names: This property contains list of codec dai names. The order of the
		    codec dai names should match to that of the phandle order given
		    in "asoc-codec".
- asoc-wsa-codec-names: This property contains list of wsa codec names. The names
			should comply with the wsa nodes configurations.
- asoc-wsa-codec-prefixes: This property contains list of wsa codec prefixes.

Example:
	 sound {
		compatible = "qcom,msm8952-audio-slim-codec";
		qcom,model = "msm8952-tomtom-snd-card";
		reg = <0xc051000 0x4>,
		      <0xc051004 0x4>,
		      <0xc055000 0x4>;
		reg-names = "csr_gp_io_mux_mic_ctl",
			    "csr_gp_io_mux_spkr_ctl",
			    "csr_gp_io_lpaif_pri_pcm_pri_mode_muxsel";
		qcom,msm-ext-pa = "primary";
		qcom,mi2s-audio-intf;
		qcom,auxpcm-audio-intf;
		qcom,msm-mi2s-master = <1>, <0>, <1>, <1>;
		qcom,msm-mi2s-ext-mclk = <1>, <1>, <0>, <1>;
		reg = <0x1711a000 0x4>,
		      <0x1711b000 0x4>,
		      <0x1711c000 0x4>,
		      <0x1711d000 0x4>;
		reg-names = "lpaif_pri_mode_muxsel",
			    "lpaif_sec_mode_muxsel",
			    "lpaif_tert_mode_muxsel",
			    "lpaif_quat_mode_muxsel";
		qcom,msm-mclk-freq = <9600000>;
		qcom,msm-mbhc-hphl-swh = <0>;
		qcom,msm-mbhc-gnd-swh = <0>;
		qcom,wsa-disable;
		qcom,msm-mbhc-moist-cfg = <1>, <3>, <0>;
		qcom,msm-hs-micbias-type = "internal";
		qcom,msm-micbias1-ext-cap;
		qcom,audio-routing =
			"RX_BIAS", "MCLK",
			"SPK_RX_BIAS", "MCLK",
			"INT_LDO_H", "MCLK",
			"MIC BIAS External", "Handset Mic",
			"MIC BIAS Internal2", "Headset Mic",
			"MIC BIAS External", "Secondary Mic",
			"AMIC1", "MIC BIAS External",
			"AMIC2", "MIC BIAS Internal2",
			"AMIC3", "MIC BIAS External";
		qcom,msm-gpios =
			"slim",
			"us_eu_gpio";
		qcom,pinctrl-names =
			"all_off",
			"slim_act",
			"us_eu_gpio_act",
			"slim_us_eu_gpio_act";
		pinctrl-names =
			"all_off",
			"slim_act",
			"us_eu_gpio_act",
			"slim_us_eu_gpio_act";
		pinctrl-0 = <&cdc_slim_lines_sus &cross_conn_det_sus>;
		pinctrl-1 = <&cdc_slim_lines_act &cross_conn_det_sus>;
		pinctrl-2 = <&cdc_slim_lines_sus &cross_conn_det_act>;
		pinctrl-3 = <&cdc_slim_lines_act &cross_conn_det_act>;
		qcom,cdc-us-euro-gpios = <&msm_gpio 63 0>;
		qcom,headset-jack-type-NC;
		qcom,audio-routing =
			"RX_BIAS", "MCLK",
			"LDO_H", "MCLK",
			"SPK_OUT", "MCLK",
			"AMIC1", "MIC BIAS1 External",
			"MIC BIAS1 External", "Handset Mic",
			"AMIC2", "MIC BIAS2 External",
			"MIC BIAS2 External", "Headset Mic",
			"AMIC4", "MIC BIAS2 External",
			"MIC BIAS2 External", "ANCRight Headset Mic",
			"AMIC5", "MIC BIAS2 External",
			"MIC BIAS2 External", "ANCLeft Headset Mic",
			"DMIC1", "MIC BIAS1 External",
			"MIC BIAS1 External", "Digital Mic1",
			"DMIC2", "MIC BIAS1 External",
			"MIC BIAS1 External", "Digital Mic2",
			"DMIC3", "MIC BIAS3 External",
			"MIC BIAS3 External", "Digital Mic3",
			"DMIC4", "MIC BIAS3 External",
			"MIC BIAS3 External", "Digital Mic4";
		asoc-platform = <&pcm0>, <&pcm1>, <&voip>, <&voice>,
				<&loopback>, <&compress>, <&hostless>,
				<&afe>, <&lsm>, <&routing>, <&lpa>;
		asoc-platform-names = "msm-pcm-dsp.0", "msm-pcm-dsp.1",
				"msm-voip-dsp", "msm-pcm-voice", "msm-pcm-loopback",
				"msm-compress-dsp", "msm-pcm-hostless", "msm-pcm-afe",
				"msm-lsm-client", "msm-pcm-routing", "msm-pcm-lpa";
		asoc-cpu = <&dai_hdmi>, <&dai_mi2s0>, <&dai_mi2s1>,
				<&dai_mi2s2>, <&dai_mi2s3>, <&sb_0_rx>, <&sb_0_tx>,
				<&sb_1_rx>, <&sb_1_tx>, <&sb_3_rx>, <&sb_3_tx>,
				<&sb_4_rx>, <&sb_4_tx>, <&sb_5_tx>, <&bt_sco_rx>,
				<&bt_sco_tx>, <&int_fm_rx>, <&int_fm_tx>, <&afe_pcm_rx>,
				<&afe_pcm_tx>, <&afe_proxy_rx>, <&afe_proxy_tx>,
				<&incall_record_rx>, <&incall_record_tx>, <&incall_music_rx>,
				<&incall_music_2_rx>;
		asoc-cpu-names = "msm-dai-q6-hdmi.8", "msm-dai-q6-mi2s.0",
				"msm-dai-q6-mi2s.1", "msm-dai-q6-mi2s.2",
				"msm-dai-q6-mi2s.3", "msm-dai-q6-dev.16384",
				"msm-dai-q6-dev.16385", "msm-dai-q6-dev.16386",
				"msm-dai-q6-dev.16387", "msm-dai-q6-dev.16390",
				"msm-dai-q6-dev.16391", "msm-dai-q6-dev.16392",
				"msm-dai-q6-dev.16393", "msm-dai-q6-dev.16395",
				"msm-dai-q6-dev.12288", "msm-dai-q6-dev.12289",
				"msm-dai-q6-dev.12292", "msm-dai-q6-dev.12293",
				"msm-dai-q6-dev.224", "msm-dai-q6-dev.225",
				"msm-dai-q6-dev.241", "msm-dai-q6-dev.240",
				"msm-dai-q6-dev.32771", "msm-dai-q6-dev.32772",
				"msm-dai-q6-dev.32773", "msm-dai-q6-dev.32770";
		asoc-codec = <&stub_codec>;
		asoc-codec-names = "msm-stub-codec.1";
		asoc-wsa-codec-names = "wsa881x.20170212";
		asoc-wsa-codec-prefixes = "SpkrLeft";
	};

* APQ8009 I2S ASoC Machine driver

Required properties:
- compatible : "qcom,apq8009-audio-i2s-codec"
- qcom,model : The user-visible name of this sound card.
- qcom,pinctrl-names : Lists all the possible combinations of the gpio sets
	mentioned in qcom,msm-gpios. Say we have 2^N combinations for N GPIOs,
	this would list all the 2^N combinations.
- pinctrl-names : The combinations of gpio sets from above that are supported in
	the flavor. This can be sometimes same as qcom,pinctrl-names i.e with 2^N
	combinations or will have less incase if some combination is not supported.
- pinctrl-# : Pinctrl states as mentioned in pinctrl-names.
- qcom,audio-routing : A list of the connections between audio components.
	Each entry is a pair of strings, the first being the connection's sink,
	the second being the connection's source.

Optional properties:
- qcom,cdc-us-euro-gpios : GPIO on which gnd/mic swap signal is coming.
- asoc-platform: This is phandle list containing the references to platform device
		nodes that are used as part of the sound card dai-links.
- asoc-platform-names:  This property contains list of platform names. The order of
			the platform names should match to that of the phandle order
			given in "asoc-platform".
- asoc-cpu: This is phandle list containing the references to cpu dai device nodes
	that are used as part of the sound card dai-links.
- asoc-cpu-names: This property contains list of cpu dai names. The order of the
	cpu dai names should match to that of the phandle order given
	in "asoc-cpu". The cpu names are in the form of "%s.%d" form,
	where the id (%d) field represents the back-end AFE port id that
	this CPU dai is associated with.
- asoc-codec: This is phandle list containing the references to codec dai device
	nodes that are used as part of the sound card dai-links.
- asoc-codec-names: This property contains list of codec dai names. The order of the
		codec dai names should match to that of the phandle order given
		in "asoc-codec".
- qcom,wsa-max-devs : Maximum number of WSA881x devices present in the target
- qcom,wsa-devs: This property contains list of wsa codec names. The names
		should comply with the wsa nodes configurations.
- qcom,wsa-aux-dev-prefix: This property contains list of wsa codec prefixes.
- qcom,tdm-i2s-switch-enable: For chipsets where tdm mics are controlled by
			  switch, drive corresponding gpio to output high
			  to enable switch.
- qcom,pdm-i2s-switch-enable: For chipsets where pdm mics are controlled by
			  switch, drive corresponding gpio to output high
			  to enable switch.

Example:
	sound {
		compatible = "qcom,apq8009-audio-i2s-codec";
		qcom,model = "apq8009-tashalite-snd-card";
		qcom,msm-codec-type = "external";
		qcom,msm-mbhc-hphl-swh = <0>;
		qcom,msm-mbhc-gnd-swh = <0>;
		qcom,msm-mclk-freq = <9600000>;
		qcom,msm-hs-micbias-type = "internal";
		qcom,audio-routing =
			"AIF4 VI", "MCLK",
			"RX_BIAS", "MCLK",
			"MADINPUT", "MCLK",
			"AMIC2", "MIC BIAS2",
			"MIC BIAS2", "Headset Mic",
			"DMIC0", "MIC BIAS1",
			"MIC BIAS1", "Digital Mic0",
			"DMIC1", "MIC BIAS1",
			"MIC BIAS1", "Digital Mic1",
			"DMIC2", "MIC BIAS2",
			"MIC BIAS2", "Digital Mic2",
			"DMIC3", "MIC BIAS2",
			"MIC BIAS2", "Digital Mic3",
			"SpkrLeft IN", "SPK1 OUT",
			"SpkrRight IN", "SPK2 OUT";

		qcom,msm-gpios =
			"pri_i2s",
			"quat_i2s";
		qcom,pinctrl-names =
			"all_off",
			"pri_i2s_act",
			"quat_i2s_act",
			"pri_i2s_quat_i2s_act";
		pinctrl-names =
			"all_off",
			"pri_i2s_act",
			"quat_i2s_act",
			"pri_i2s_quat_i2s_act";
		pinctrl-0 = <&pri_mi2s_sleep &pri_mi2s_ws_sleep
			&pri_mi2s_dout_sleep &pri_mi2s_din_sleep
			&quat_mi2s_sleep &quat_mi2s_din_sleep>;
		pinctrl-1 = <&pri_mi2s_active &pri_mi2s_ws_active
			&pri_mi2s_dout_active &pri_mi2s_din_active
			&quat_mi2s_sleep &quat_mi2s_din_sleep>;
		pinctrl-2 = <&pri_mi2s_sleep &pri_mi2s_ws_sleep
			&pri_mi2s_dout_sleep &pri_mi2s_din_sleep
			&quat_mi2s_active &quat_mi2s_din_active>;
		pinctrl-3 = <&pri_mi2s_active &pri_mi2s_ws_active
			&pri_mi2s_dout_active &pri_mi2s_din_active
			&quat_mi2s_active &quat_mi2s_din_active>;

		asoc-platform = <&pcm0>, <&pcm1>, <&voip>, <&voice>,
			<&loopback>, <&compress>, <&hostless>,
			<&afe>, <&lsm>, <&routing>, <&cpe>, <&lpa>;
		asoc-platform-names = "msm-pcm-dsp.0", "msm-pcm-dsp.1",
			"msm-voip-dsp", "msm-pcm-voice", "msm-pcm-loopback",
			"msm-compress-dsp", "msm-pcm-hostless", "msm-pcm-afe",
			"msm-lsm-client", "msm-pcm-routing", "msm-cpe-lsm",
			"msm-pcm-lpa";
		asoc-cpu =  <&dai_pri_auxpcm>, <&dai_hdmi>,<&dai_mi2s0>,
			<&dai_mi2s2>, <&dai_mi2s3>,
			<&sb_0_rx>, <&sb_0_tx>, <&sb_1_rx>, <&sb_1_tx>,
			<&sb_3_rx>, <&sb_3_tx>,
			<&sb_4_rx>, <&sb_4_tx>, <&afe_pcm_rx>,
			<&afe_pcm_tx>, <&afe_proxy_rx>, <&afe_proxy_tx>,
			<&incall_record_rx>, <&incall_record_tx>,
			<&incall_music_rx>, <&incall_music_2_rx>,
			<&bt_sco_rx>,
			<&bt_sco_tx>, <&int_fm_rx>, <&int_fm_tx>;
		asoc-cpu-names = "msm-dai-q6-auxpcm.1", "msm-dai-q6-hdmi.8",
			"msm-dai-q6-mi2s.0",
			"msm-dai-q6-mi2s.2", "msm-dai-q6-mi2s.3",
			"msm-dai-q6-dev.16384", "msm-dai-q6-dev.16385",
			"msm-dai-q6-dev.16386", "msm-dai-q6-dev.16387",
			"msm-dai-q6-dev.16390", "msm-dai-q6-dev.16391",
			"msm-dai-q6-dev.16392", "msm-dai-q6-dev.16393",
			"msm-dai-q6-dev.224",
			"msm-dai-q6-dev.225", "msm-dai-q6-dev.241",
			"msm-dai-q6-dev.240", "msm-dai-q6-dev.32771",
			"msm-dai-q6-dev.32772", "msm-dai-q6-dev.32773",
			"msm-dai-q6-dev.32770",
			"msm-dai-q6-dev.12288", "msm-dai-q6-dev.12289",
			"msm-dai-q6-dev.12292", "msm-dai-q6-dev.12293";
		asoc-codec = <&stub_codec>;
		asoc-codec-names = "msm-stub-codec.1";
		qcom,wsa-max-devs = <2>;
		qcom,wsa-devs = <&wsa881x_213>, <&wsa881x_214>;
		qcom,wsa-aux-dev-prefix = "SpkrLeft", "SpkrRight";
	};

* MSM8909 BG ASoC Machine driver

Required properties:
- compatible : "qcom,msm-bg-audio-codec"
- qcom,model : The user-visible name of this sound card.
- qcom,pinctrl-names : Lists all the possible combinations of the gpio sets
	mentioned in qcom,msm-gpios. Say we have 2^N combinations for N GPIOs,
	this would list all the 2^N combinations.
- pinctrl-names : The combinations of gpio sets from above that are supported in
	the flavor. This can be sometimes same as qcom,pinctrl-names i.e with 2^N
	combinations or will have less incase if some combination is not supported.
- pinctrl-# : Pinctrl states as mentioned in pinctrl-names.
- qcom,audio-routing : A list of the connections between audio components.
	Each entry is a pair of strings, the first being the connection's sink,
	the second being the connection's source.

Optional properties:
- qcom,cdc-us-euro-gpios : GPIO on which gnd/mic swap signal is coming.
- asoc-platform: This is phandle list containing the references to platform device
		nodes that are used as part of the sound card dai-links.
- asoc-platform-names:  This property contains list of platform names. The order of
			the platform names should match to that of the phandle order
			given in "asoc-platform".
- asoc-cpu: This is phandle list containing the references to cpu dai device nodes
	that are used as part of the sound card dai-links.
- asoc-cpu-names: This property contains list of cpu dai names. The order of the
	cpu dai names should match to that of the phandle order given
	in "asoc-cpu". The cpu names are in the form of "%s.%d" form,
	where the id (%d) field represents the back-end AFE port id that
	this CPU dai is associated with.
- asoc-codec: This is phandle list containing the references to codec dai device
	nodes that are used as part of the sound card dai-links.
- asoc-codec-names: This property contains list of codec dai names. The order of the
		codec dai names should match to that of the phandle order given
		in "asoc-codec".
- vdd-spkr-supply: BG codec supply's speaker regulator device tree node.

Example:
	sound {
		status = "disabled";
		compatible = "qcom,msm-bg-audio-codec";
		qcom,model = "msm-bg-snd-card";
		reg = <0x7702000 0x4>,
		      <0x7702004 0x4>,
		      <0x7702008 0x4>,
		      <0x770200c 0x4>;
		reg-names = "csr_gp_io_mux_mic_ctl",
			    "csr_gp_io_mux_spkr_ctl",
			    "csr_gp_io_lpaif_pri_pcm_pri_mode_muxsel",
			    "csr_gp_io_lpaif_sec_pcm_sec_mode_muxsel";
		qcom,msm-snd-card-id = <0>;
		qcom,msm-ext-pa = "primary";
		qcom,tdm-audio-intf;
		qcom,msm-afe-clk-ver = <1>;
		asoc-platform = <&pcm0>, <&pcm1>, <&pcm2>, <&voip>, <&voice>,
				<&loopback>, <&compress>, <&hostless>,
				<&afe>, <&lsm>, <&routing>, <&lpa>,
				<&voice_svc>;
		asoc-platform-names = "msm-pcm-dsp.0", "msm-pcm-dsp.1",
				      "msm-pcm-dsp.2", "msm-voip-dsp",
				      "msm-pcm-voice", "msm-pcm-loopback",
				      "msm-compress-dsp", "msm-pcm-hostless",
				      "msm-pcm-afe", "msm-lsm-client",
				      "msm-pcm-routing", "msm-pcm-lpa",
				      "msm-voice-svc";
		asoc-cpu = <&dai_pri_auxpcm>,
				<&dai_mi2s0>, <&dai_mi2s1>, <&dai_mi2s2>,
				<&dai_mi2s3>, <&dai_mi2s5>, <&dai_mi2s6>,
				<&bt_sco_rx>, <&bt_sco_tx>, <&bt_a2dp_rx>,
				<&int_fm_rx>, <&int_fm_tx>, <&afe_pcm_rx>,
				<&afe_pcm_tx>, <&afe_proxy_rx>, <&afe_proxy_tx>,
				<&incall_record_rx>, <&incall_record_tx>,
				<&incall_music_rx>, <&incall_music_2_rx>,
				<&dai_pri_tdm_rx_0>, <&dai_pri_tdm_tx_0>,
				<&dai_pri_tdm_rx_1>, <&dai_pri_tdm_tx_1>,
				<&dai_pri_tdm_rx_2>, <&dai_pri_tdm_tx_2>,
				<&dai_pri_tdm_rx_3>, <&dai_pri_tdm_tx_3>;
		asoc-cpu-names = "msm-dai-q6-auxpcm.1",
				"msm-dai-q6-mi2s.0", "msm-dai-q6-mi2s.1",
				"msm-dai-q6-mi2s.2", "msm-dai-q6-mi2s.3",
				"msm-dai-q6-mi2s.5", "msm-dai-q6-mi2s.6",
				"msm-dai-q6-dev.12288", "msm-dai-q6-dev.12289",
				"msm-dai-q6-dev.12290", "msm-dai-q6-dev.12292",
				"msm-dai-q6-dev.12293", "msm-dai-q6-dev.224",
				"msm-dai-q6-dev.225", "msm-dai-q6-dev.241",
				"msm-dai-q6-dev.240", "msm-dai-q6-dev.32771",
				"msm-dai-q6-dev.32772", "msm-dai-q6-dev.32773",
				"msm-dai-q6-dev.32770", "msm-dai-q6-tdm.36864",
				"msm-dai-q6-tdm.36865", "msm-dai-q6-tdm.36866",
				"msm-dai-q6-tdm.36867", "msm-dai-q6-tdm.36868",
				"msm-dai-q6-tdm.36869", "msm-dai-q6-tdm.36870",
				"msm-dai-q6-tdm.36871";
		asoc-codec = <&stub_codec>;
		asoc-codec-names = "msm-stub-codec.1";
	};

* BG Codec Driver.

Required properties:
- compatible : "qcom,bg-codec"
- qcom,bg-glink : Glink component required for the BG codec communication.
	- compatible :"qcom,bg-cdc-glink"
- qcom,msm-glink-channels: Number of glink channels available to communicate
			   with the glink client
- vdd-spkr-supply: BG codec supply's speaker regulator device tree node.

Optional properties:
- qcom,bg-speaker-connected: This flag will notify BG codec driver that speaker
			is connected to target or not. Based on this flag BG
			codec driver will send smart pa init params to BG.

Example:

        bg_cdc: bg_codec {
                status = "disabled";
                compatible = "qcom,bg-codec";
                qcom,bg-glink {
                        compatible = "qcom,bg-cdc-glink";
                        qcom,msm-glink-channels = <4>;
                };
        };

* MDM9607 ASoC Machine driver

Required properties:
- compatible : "qcom,mdm9607-audio-tomtom"
- qcom,model : The user-visible name of this sound card.
- qcom,audio-routing : A list of the connections between audio components.
Each entry is a pair of strings, the first being the connection's sink,
the second being the connection's source.
- qcom,tomtom-mclk-clk-freq : Master clock value given to codec. Some WCD9XXX
codec can run at different mclk values. Mclk value can be 9.6MHz or 12.288MHz.
- pinctrl-names : pinctrl state names for each pin group configuration.
- pinctrl-x : defines pinctrl state for each pin group
- asoc-platform: This is phandle list containing the references to platform device
		 nodes that are used as part of the sound card dai-links.
- asoc-platform-names: This property contains list of platform names. The order of
		       the platform names should match to that of the phandle order
		       given in "asoc-platform".
- asoc-cpu: This is phandle list containing the references to cpu dai device nodes
	    that are used as part of the sound card dai-links.
- asoc-cpu-names: This property contains list of cpu dai names. The order of the
		  cpu dai names should match to that of the phandle order given
		  in "asoc-cpu". The cpu names are in the form of "%s.%d" form,
		  where the id (%d) field represents the back-end AFE port id that
		  this CPU dai is associated with.
- asoc-codec: This is phandle list containing the references to codec dai device
	      nodes that are used as part of the sound card dai-links.
- asoc-codec-names: This property contains list of codec dai names. The order of the
		    codec dai names should match to that of the phandle order given
		    in "asoc-codec".

Example:

sound {
		compatible = "qcom,mdm9607-audio-tomtom";
		qcom,model = "mdm9607-tomtom-i2s-snd-card";

		qcom,audio-routing =
			"RX_BIAS", "MCLK",
			"LDO_H", "MCLK",
			"AMIC1", "MIC BIAS1 External",
			"MIC BIAS1 External", "Handset Mic",
			"AMIC2", "MIC BIAS2 External",
			"MIC BIAS2 External", "Headset Mic",
			"AMIC3", "MIC BIAS2 External",
			"MIC BIAS2 External", "ANCRight Headset Mic",
			"AMIC4", "MIC BIAS2 External",
			"MIC BIAS2 External", "ANCLeft Headset Mic",
			"DMIC1", "MIC BIAS1 External",
			"MIC BIAS1 External", "Digital Mic1",
			"DMIC3", "MIC BIAS3 External",
			"MIC BIAS3 External", "Digital Mic3";

		qcom,tomtom-mclk-clk-freq = <12288000>;
		asoc-platform = <&pcm0>, <&pcm1>, <&voip>, <&voice>,
				<&loopback>, <&hostless>, <&afe>, <&routing>,
				<&pcm_dtmf>, <&host_pcm>;
		asoc-platform-names = "msm-pcm-dsp.0", "msm-pcm-dsp.1",
				"msm-voip-dsp", "msm-pcm-voice", "msm-pcm-loopback",
				"msm-pcm-hostless", "msm-pcm-afe",
				"msm-pcm-routing", "msm-pcm-dtmf", "msm-voice-host-pcm";
		asoc-cpu = <&dai_pri_auxpcm>, <&mi2s_prim>, <&dtmf_tx>,
				<&rx_capture_tx>, <&rx_playback_rx>,
				<&tx_capture_tx>, <&tx_playback_rx>,
				<&afe_pcm_rx>, <&afe_pcm_tx>, <&afe_proxy_rx>,
				<&afe_proxy_tx>, <&incall_record_rx>,
				<&incall_record_tx>, <&incall_music_rx>;
		asoc-cpu-names = "msm-dai-q6-auxpcm.1", "msm-dai-q6-mi2s.0",
				"msm-dai-stub-dev.4", "msm-dai-stub-dev.5",
				"msm-dai-stub-dev.6", "msm-dai-stub-dev.7",
				"msm-dai-stub-dev.8", "msm-dai-q6-dev.224",
				"msm-dai-q6-dev.225", "msm-dai-q6-dev.241",
				"msm-dai-q6-dev.240", "msm-dai-q6-dev.32771",
				"msm-dai-q6-dev.32772", "msm-dai-q6-dev.32773";
		asoc-codec = <&stub_codec>;
		asoc-codec-names = "msm-stub-codec.1";
	};

* MDMCALIFORNIUM ASoC Machine driver

- compatible : "qcom,mdm-audio-tasha" for tasha codec and
                node is "sound"
- qcom,model : The user-visible name of this sound card.
- qcom,tasha-mclk-clk-freq : MCLK frequency value for tasha codec
                             and node is "sound-9335"
- qcom,audio-routing : A list of the connections between audio components.
- asoc-platform: This is phandle list containing the references to platform device
                 nodes that are used as part of the sound card dai-links.
- asoc-platform-names: This property contains list of platform names. The order of
                       the platform names should match to that of the phandle order
                       given in "asoc-platform".
- asoc-cpu: This is phandle list containing the references to cpu dai device nodes
            that are used as part of the sound card dai-links.
- asoc-cpu-names: This property contains list of cpu dai names. The order of the
                  cpu dai names should match to that of the phandle order given
                  in "asoc-cpu". The cpu names are in the form of "%s.%d" form,
                  where the id (%d) field represents the back-end AFE port id that
                  this CPU dai is associated with.
- asoc-codec: This is phandle list containing the references to codec dai device
              nodes that are used as part of the sound card dai-links.
- asoc-codec-names: This property contains list of codec dai names. The order of the
                    codec dai names should match to that of the phandle order given
                    in "asoc-codec".
Optional properties:
- clock-names : clock name defined for external clock.
- clocks : external clock defined for codec clock.
- qcom,hph-en1-gpio : GPIO to enable HiFi amplifiers.
- qcom,hph-en0-gpio : GPIO to enable HiFi audio route to headset.

Example:

	sound {
	compatible = "qcom,mdm-audio-tasha";
	qcom,model = "mdm-tasha-i2s-snd-card";

	qcom,audio-routing =
		"RX_BIAS", "MCLK",
		"LDO_H", "MCLK",
		"AIF4 MAD", "MCLK",
		"ultrasound amp", "LINEOUT1",
		"ultrasound amp", "LINEOUT3",
		"AMIC1", "MIC BIAS1 Internal1",
		"MIC BIAS1 Internal1", "Handset Mic",
		"AMIC2", "MIC BIAS2 External",
		"MIC BIAS2 External", "Headset Mic",
		"AMIC3", "MIC BIAS2 External",
		"MIC BIAS2 External", "ANCRight Headset Mic",
		"AMIC4", "MIC BIAS2 External",
		"MIC BIAS2 External", "ANCLeft Headset Mic",
		"DMIC1", "MIC BIAS1 External",
		"MIC BIAS1 External", "Digital Mic1",
		"DMIC2", "MIC BIAS1 External",
		"MIC BIAS1 External", "Digital Mic2",
		"DMIC3", "MIC BIAS3 External",
		"MIC BIAS3 External", "Digital Mic3",
		"DMIC4", "MIC BIAS3 External",
		"MIC BIAS3 External", "Digital Mic4",
		"DMIC5", "MIC BIAS4 External",
		"MIC BIAS4 External", "Digital Mic5",
		"DMIC6", "MIC BIAS4 External",
		"MIC BIAS4 External", "Digital Mic6";

		qcom,tasha-mclk-clk-freq = <12288000>;
		asoc-platform = <&pcm0>, <&pcm1>, <&voip>, <&voice>,
				<&loopback>, <&hostless>, <&afe>, <&routing>,
				<&pcm_dtmf>, <&host_pcm>;
		asoc-platform-names = "msm-pcm-dsp.0", "msm-pcm-dsp.1",
				"msm-voip-dsp", "msm-pcm-voice", "msm-pcm-loopback",
				"msm-pcm-hostless", "msm-pcm-afe",
				"msm-pcm-routing", "msm-pcm-dtmf", "msm-voice-host-pcm";
		asoc-cpu = <&dai_pri_auxpcm>, <&mi2s_prim>, <&dtmf_tx>,
				<&rx_capture_tx>, <&rx_playback_rx>,
				<&tx_capture_tx>, <&tx_playback_rx>,
				<&afe_pcm_rx>, <&afe_pcm_tx>, <&afe_proxy_rx>,
				<&afe_proxy_tx>, <&incall_record_rx>,
				<&incall_record_tx>, <&incall_music_rx>;
		asoc-cpu-names = "msm-dai-q6-auxpcm.1", "msm-dai-q6-mi2s.0",
				"msm-dai-stub-dev.4", "msm-dai-stub-dev.5",
				"msm-dai-stub-dev.6", "msm-dai-stub-dev.7",
				"msm-dai-stub-dev.8", "msm-dai-q6-dev.224",
				"msm-dai-q6-dev.225", "msm-dai-q6-dev.241",
				"msm-dai-q6-dev.240", "msm-dai-q6-dev.32771",
				"msm-dai-q6-dev.32772", "msm-dai-q6-dev.32773";
		asoc-codec = <&stub_codec>;
		asoc-codec-names = "msm-stub-codec.1";
		qcom,aux-codec = <&stub_codec>;
	};

* SDX ASoC Machine driver

Required properties:
- compatible : "qcom,sdx-asoc-snd-tavil"
- qcom,model : The user-visible name of this sound card.
- qcom,prim_mi2s_aux_master : Handle to prim_master pinctrl configurations
- qcom,prim_mi2s_aux_slave : Handle to prim_slave pinctrl configurations
- qcom,sec_mi2s_aux_master : Handle to sec_master pinctrl configurations
- qcom,sec_mi2s_aux_slave : Handle to sec_slave pinctrl configurations
- asoc-platform: This is phandle list containing the references to platform device
		nodes that are used as part of the sound card dai-links.
- asoc-platform-names: This property contains list of platform names. The order of
		the platform names should match to that of the phandle order
		given in "asoc-platform".
- asoc-cpu: This is phandle list containing the references to cpu dai device nodes
		that are used as part of the sound card dai-links.
- asoc-cpu-names: This property contains list of cpu dai names. The order of the
		cpu dai names should match to that of the phandle order give
		in "asoc-cpu". The cpu names are in the form of "%s.%d" form,
		where the id (%d) field represents the back-end AFE port id that
		this CPU dai is associated with.

Example:

	sound-tavil {
		compatible = "qcom,sdx-asoc-snd-tavil";
		qcom,model = "sdx-tavil-i2s-snd-card";
		qcom,prim_mi2s_aux_master = <&prim_master>;
		qcom,prim_mi2s_aux_slave = <&prim_slave>;
		qcom,sec_mi2s_aux_master = <&sec_master>;
		qcom,sec_mi2s_aux_slave = <&sec_slave>;

		asoc-platform = <&pcm0>, <&pcm1>, <&voip>, <&voice>,
				<&loopback>, <&hostless>, <&afe>, <&routing>,
				<&pcm_dtmf>, <&host_pcm>, <&compress>;
		asoc-platform-names = "msm-pcm-dsp.0", "msm-pcm-dsp.1",
				"msm-voip-dsp", "msm-pcm-voice",
				"msm-pcm-loopback", "msm-pcm-hostless",
				"msm-pcm-afe", "msm-pcm-routing",
				"msm-pcm-dtmf", "msm-voice-host-pcm",
				"msm-compress-dsp";
		asoc-cpu = <&dai_pri_auxpcm>, <&mi2s_prim>, <&mi2s_sec>,
				<&dtmf_tx>,
				<&rx_capture_tx>, <&rx_playback_rx>,
				<&tx_capture_tx>, <&tx_playback_rx>,
				<&afe_pcm_rx>, <&afe_pcm_tx>, <&afe_proxy_rx>,
				<&afe_proxy_tx>, <&incall_record_rx>,
				<&incall_record_tx>, <&incall_music_rx>,
				<&dai_sec_auxpcm>, <&incall_music_dl_rx>;
		asoc-cpu-names = "msm-dai-q6-auxpcm.1",
				"msm-dai-q6-mi2s.0", "msm-dai-q6-mi2s.1",
				"msm-dai-stub-dev.4", "msm-dai-stub-dev.5",
				"msm-dai-stub-dev.6", "msm-dai-stub-dev.7",
				"msm-dai-stub-dev.8", "msm-dai-q6-dev.224",
				"msm-dai-q6-dev.225", "msm-dai-q6-dev.241",
				"msm-dai-q6-dev.240", "msm-dai-q6-dev.32771",
				"msm-dai-q6-dev.32772", "msm-dai-q6-dev.32773",
				"msm-dai-q6-auxpcm.2", "msm-dai-q6-dev.32774";
		qcom,msm_audio_ssr_devs = <&audio_apr>, <&q6core>;
	};

* SDX ASoC Auto Machine driver

Required properties:
- compatible : "qcom,sdx-asoc-snd-auto"
- qcom,model : The user-visible name of this sound card.
- qcom,prim_mi2s_aux_master : Handle to prim_master pinctrl configurations
- qcom,prim_mi2s_aux_slave : Handle to prim_slave pinctrl configurations
- qcom,sec_mi2s_aux_master : Handle to sec_master pinctrl configurations
- qcom,sec_mi2s_aux_slave : Handle to sec_slave pinctrl configurations
- asoc-platform: This is phandle list containing the references to platform device
		nodes that are used as part of the sound card dai-links.
- asoc-platform-names: This property contains list of platform names. The order of
		the platform names should match to that of the phandle order
		given in "asoc-platform".
- asoc-cpu: This is phandle list containing the references to cpu dai device nodes
		that are used as part of the sound card dai-links.
- asoc-cpu-names: This property contains list of cpu dai names. The order of the
		cpu dai names should match to that of the phandle order give
		in "asoc-cpu". The cpu names are in the form of "%s.%d" form,
		where the id (%d) field represents the back-end AFE port id that
		this CPU dai is associated with.
- asoc-codec: This is phandle list containing the references to codec dai device
		nodes that are used as part of the sound card dai-links.
- asoc-codec-names: This property contains list of codec dai names. The order of the
		codec dai names should match to that of the phandle order given
		in "asoc-codec".

Example:

	sound-auto {
		compatible = "qcom,sdx-asoc-snd-auto";
		qcom,model = "sdx-auto-i2s-snd-card";
		qcom,prim_mi2s_aux_master = <&prim_master>;
		qcom,prim_mi2s_aux_slave = <&prim_slave>;
		qcom,sec_mi2s_aux_master = <&sec_master>;
		qcom,sec_mi2s_aux_slave = <&sec_slave>;

		asoc-platform = <&pcm0>, <&pcm1>, <&voip>, <&voice>,
				<&loopback>, <&hostless>, <&afe>, <&routing>,
				<&pcm_dtmf>, <&host_pcm>, <&compress>;
		asoc-platform-names = "msm-pcm-dsp.0", "msm-pcm-dsp.1",
				"msm-voip-dsp", "msm-pcm-voice",
				"msm-pcm-loopback", "msm-pcm-hostless",
				"msm-pcm-afe", "msm-pcm-routing",
				"msm-pcm-dtmf", "msm-voice-host-pcm",
				"msm-compress-dsp";
		asoc-cpu = <&dai_pri_auxpcm>, <&mi2s_prim>, <&mi2s_sec>,
				<&dtmf_tx>,
				<&rx_capture_tx>, <&rx_playback_rx>,
				<&tx_capture_tx>, <&tx_playback_rx>,
				<&afe_pcm_rx>, <&afe_pcm_tx>, <&afe_proxy_rx>,
				<&afe_proxy_tx>, <&incall_record_rx>,
				<&incall_record_tx>, <&incall_music_rx>,
				<&dai_pri_tdm_rx_0>, <&dai_pri_tdm_tx_0>,
				<&dai_sec_tdm_rx_0>, <&dai_sec_tdm_tx_0>,
				<&dai_sec_auxpcm>, <&incall_music_dl_rx>;
		asoc-cpu-names = "msm-dai-q6-auxpcm.1",
				"msm-dai-q6-mi2s.0", "msm-dai-q6-mi2s.1",
				"msm-dai-stub-dev.4", "msm-dai-stub-dev.5",
				"msm-dai-stub-dev.6", "msm-dai-stub-dev.7",
				"msm-dai-stub-dev.8", "msm-dai-q6-dev.224",
				"msm-dai-q6-dev.225", "msm-dai-q6-dev.241",
				"msm-dai-q6-dev.240", "msm-dai-q6-dev.32771",
				"msm-dai-q6-dev.32772", "msm-dai-q6-dev.32773",
				"msm-dai-q6-tdm.36864", "msm-dai-q6-tdm.36865",
				"msm-dai-q6-tdm.36880", "msm-dai-q6-tdm.36881",
				"msm-dai-q6-auxpcm.2", "msm-dai-q6-dev.32774";
		asoc-codec = <&tlv320aic3x_codec>, <&stub_codec>;
		asoc-codec-names = "tlv320aic3x-codec", "msm-stub-codec.1";
	};

* APQ8096 Automotive ASoC Machine driver

Required properties:
- compatible : "qcom,apq8096-asoc-snd-auto" for auto codec and
		node is "sound-auto",
		"qcom,apq8096-asoc-snd-adp-agave" for adp agave codec and
		node is "sound-adp-agave",
		"qcom,apq8096-asoc-snd-adp-mmxf" for adp mmxf codec and
		node is "sound-adp-mmxf".
- qcom,model : The user-visible name of this sound card.
- asoc-platform: This is phandle list containing the references to platform device
		nodes that are used as part of the sound card dai-links.
- asoc-platform-names: This property contains list of platform names. The order of
		the platform names should match to that of the phandle order
		given in "asoc-platform".
- asoc-cpu: This is phandle list containing the references to cpu dai device nodes
		that are used as part of the sound card dai-links.
- asoc-cpu-names: This property contains list of cpu dai names. The order of the
		cpu dai names should match to that of the phandle order given
		in "asoc-cpu". The cpu names are in the form of "%s.%d" form,
		where the id (%d) field represents the back-end AFE port id that
		this CPU dai is associated with.
- asoc-codec: This is phandle list containing the references to codec dai device
		nodes that are used as part of the sound card dai-links.
- asoc-codec-names: This property contains list of codec dai names. The order of the
		codec dai names should match to that of the phandle order given
		in "asoc-codec".

Example:

	sound-auto {
		compatible = "qcom,apq8096-asoc-snd-auto";
		qcom,model = "apq8096-auto-snd-card";

		asoc-platform = <&pcm0>, <&pcm1>, <&pcm2>, <&voip>, <&voice>,
				<&loopback>, <&compress>, <&hostless>,
				<&afe>, <&lsm>, <&routing>, <&compr>,
				<&loopback1>;
		asoc-platform-names = "msm-pcm-dsp.0", "msm-pcm-dsp.1",
				"msm-pcm-dsp.2", "msm-voip-dsp",
				"msm-pcm-voice", "msm-pcm-loopback",
				"msm-compress-dsp", "msm-pcm-hostless",
				"msm-pcm-afe", "msm-lsm-client",
				"msm-pcm-routing", "msm-compr-dsp",
				"msm-pcm-loopback.1";
		asoc-cpu = <&dai_pri_auxpcm>, <&dai_sec_auxpcm>, <&dai_hdmi>,
				<&dai_mi2s>, <&dai_mi2s_quat>,
				<&afe_pcm_rx>, <&afe_pcm_tx>,
				<&afe_proxy_rx>, <&afe_proxy_tx>,
				<&incall_record_rx>, <&incall_record_tx>,
				<&incall_music_rx>, <&incall_music2_rx>,
				<&dai_tert_tdm_rx_0>, <&dai_tert_tdm_rx_1>,
				<&dai_tert_tdm_rx_2>, <&dai_tert_tdm_rx_3>,
				<&dai_tert_tdm_tx_0>, <&dai_tert_tdm_tx_1>,
				<&dai_tert_tdm_tx_2>, <&dai_tert_tdm_tx_3>,
				<&dai_quat_tdm_rx_0>, <&dai_quat_tdm_rx_1>,
				<&dai_quat_tdm_rx_2>, <&dai_quat_tdm_rx_3>,
				<&dai_quat_tdm_tx_0>, <&dai_quat_tdm_tx_1>,
				<&dai_quat_tdm_tx_2>, <&dai_quat_tdm_tx_3>;
		asoc-cpu-names = "msm-dai-q6-auxpcm.1", "msm-dai-q6-auxpcm.2",
				"msm-dai-q6-hdmi.8",
				"msm-dai-q6-mi2s.2", "msm-dai-q6-mi2s.3",
				"msm-dai-q6-dev.224", "msm-dai-q6-dev.225",
				"msm-dai-q6-dev.241", "msm-dai-q6-dev.240",
				"msm-dai-q6-dev.32771", "msm-dai-q6-dev.32772",
				"msm-dai-q6-dev.32773", "msm-dai-q6-dev.32770",
				"msm-dai-q6-tdm.36896", "msm-dai-q6-tdm.36898",
				"msm-dai-q6-tdm.36900", "msm-dai-q6-tdm.36902",
				"msm-dai-q6-tdm.36897", "msm-dai-q6-tdm.36899",
				"msm-dai-q6-tdm.36901", "msm-dai-q6-tdm.36903",
				"msm-dai-q6-tdm.36912", "msm-dai-q6-tdm.36914",
				"msm-dai-q6-tdm.36916", "msm-dai-q6-tdm.36918",
				"msm-dai-q6-tdm.36913", "msm-dai-q6-tdm.36915",
				"msm-dai-q6-tdm.36917", "msm-dai-q6-tdm.36919";
		asoc-codec = <&stub_codec>;
		asoc-codec-names = "msm-stub-codec.1";
	};

* SDM660 ASoC Slimbus Machine driver

Required properties:
- compatible : "qcom,sdm660-asoc-snd-tasha" for tasha codec,
		"qcom,sdm660-asoc-snd-tavil" for tavil codec.
- qcom,model : The user-visible name of this sound card.
- qcom,msm-mclk-freq : MCLK frequency value for external codec
- qcom,msm-gpios : Lists down all the gpio sets that are supported.
- qcom,pinctrl-names : Lists all the possible combinations of the gpio sets
mentioned in qcom,msm-gpios. Say we have 2^N combinations for N GPIOs,
this would list all the 2^N combinations.
- pinctrl-names : The combinations of gpio sets from above that are supported in
the flavor. This can be sometimes same as qcom, pinctrl-names i.e with 2^N
combinations or will have less incase if some combination is not supported.
- pinctrl-# : Pinctrl states as mentioned in pinctrl-names.
- qcom,audio-routing : A list of the connections between audio components.
- asoc-platform: This is phandle list containing the references to platform device
		 nodes that are used as part of the sound card dai-links.
- asoc-platform-names: This property contains list of platform names. The order of
		       the platform names should match to that of the phandle order
		       given in "asoc-platform".
- asoc-cpu: This is phandle list containing the references to cpu dai device nodes
	    that are used as part of the sound card dai-links.
- asoc-cpu-names: This property contains list of cpu dai names. The order of the
		  cpu dai names should match to that of the phandle order given
		  in "asoc-cpu". The cpu names are in the form of "%s.%d" form,
		  where the id (%d) field represents the back-end AFE port id that
		  this CPU dai is associated with.
- asoc-codec: This is phandle list containing the references to codec dai device
	      nodes that are used as part of the sound card dai-links.
- asoc-codec-names: This property contains list of codec dai names. The order of the
		    codec dai names should match to that of the phandle order given
		    in "asoc-codec".
Optional properties:
- qcom,cdc-us-euro-gpios : GPIO on which gnd/mic swap signal is coming.
- clock-names : clock name defined for external clock.
- clocks : external clock defined for codec clock.
- qcom,wsa-max-devs : Maximum number of WSA881x devices present in the target
- qcom,wsa-devs : List of phandles for all possible WSA881x devices supported for the target
- qcom,wsa-aux-dev-prefix : Name prefix with Left/Right configuration for WSA881x device

Example:

	sound-9335 {
	compatible = "qcom,sdm660-asoc-snd-tasha";
	qcom,model = "sdm660-tasha-snd-card";

	qcom,audio-routing =
		"RX_BIAS", "MCLK",
		"LDO_H", "MCLK",
		"AIF4 MAD", "MCLK",
		"ultrasound amp", "LINEOUT1",
		"ultrasound amp", "LINEOUT3",
		"AMIC1", "MIC BIAS1 Internal1",
		"MIC BIAS1 Internal1", "Handset Mic",
		"AMIC2", "MIC BIAS2 External",
		"MIC BIAS2 External", "Headset Mic",
		"AMIC3", "MIC BIAS2 External",
		"MIC BIAS2 External", "ANCRight Headset Mic",
		"AMIC4", "MIC BIAS2 External",
		"MIC BIAS2 External", "ANCLeft Headset Mic",
		"DMIC1", "MIC BIAS1 External",
		"MIC BIAS1 External", "Digital Mic1",
		"DMIC2", "MIC BIAS1 External",
		"MIC BIAS1 External", "Digital Mic2",
		"DMIC3", "MIC BIAS3 External",
		"MIC BIAS3 External", "Digital Mic3",
		"DMIC4", "MIC BIAS3 External",
		"MIC BIAS3 External", "Digital Mic4",
		"DMIC5", "MIC BIAS4 External",
		"MIC BIAS4 External", "Digital Mic5",
		"DMIC6", "MIC BIAS4 External",
		"MIC BIAS4 External", "Digital Mic6";

		qcom,msm-mbhc-hphl-swh = <0>;
		qcom,msm-mbhc-gnd-swh = <0>;
		qcom,msm-mclk-freq = <9600000>;
		qcom,msm-gpios =
			"slim",
			"us_eu_gpio";
		qcom,pinctrl-names =
			"all_off",
			"slim_act",
			"us_eu_gpio_act",
			"slim_us_eu_gpio_act";
		pinctrl-names =
			"all_off",
			"slim_act",
			"us_eu_gpio_act",
			"slim_us_eu_gpio_act";
		pinctrl-0 = <&cdc_slim_lines_sus &cross_conn_det_sus>;
		pinctrl-1 = <&cdc_slim_lines_act &cross_conn_det_sus>;
		pinctrl-2 = <&cdc_slim_lines_sus &cross_conn_det_act>;
		pinctrl-3 = <&cdc_slim_lines_act &cross_conn_det_act>;
		qcom,cdc-us-euro-gpios = <&msm_gpio 63 0>;
		asoc-platform = <&pcm0>, <&pcm1>, <&pcm2>, <&voip>, <&voice>,
				<&loopback>, <&compress>, <&hostless>,
				<&afe>, <&lsm>, <&routing>, <&cpe>, <&compr>;
		asoc-platform-names = "msm-pcm-dsp.0", "msm-pcm-dsp.1",
				"msm-pcm-dsp.2", "msm-voip-dsp",
				"msm-pcm-voice", "msm-pcm-loopback",
				"msm-compress-dsp", "msm-pcm-hostless",
				"msm-pcm-afe", "msm-lsm-client",
				"msm-pcm-routing", "msm-cpe-lsm",
				"msm-compr-dsp";
		asoc-cpu = <&dai_hdmi>,
				<&sb_0_rx>, <&sb_0_tx>, <&sb_1_rx>, <&sb_1_tx>,
				<&sb_2_rx>, <&sb_2_tx>, <&sb_3_rx>, <&sb_3_tx>,
				<&sb_4_rx>, <&sb_4_tx>, <&sb_5_tx>,
				<&afe_pcm_rx>, <&afe_pcm_tx>, <&afe_proxy_rx>,
				<&afe_proxy_tx>, <&incall_record_rx>,
				<&incall_record_tx>, <&incall_music_rx>,
				<&incall_music_2_rx>, <&sb_5_rx>;
		asoc-cpu-names = "msm-dai-q6-hdmi.8",
				"msm-dai-q6-dev.16384", "msm-dai-q6-dev.16385",
				"msm-dai-q6-dev.16386", "msm-dai-q6-dev.16387",
				"msm-dai-q6-dev.16388", "msm-dai-q6-dev.16389",
				"msm-dai-q6-dev.16390", "msm-dai-q6-dev.16391",
				"msm-dai-q6-dev.16392", "msm-dai-q6-dev.16393",
				"msm-dai-q6-dev.16395", "msm-dai-q6-dev.224",
				"msm-dai-q6-dev.225", "msm-dai-q6-dev.241",
				"msm-dai-q6-dev.240", "msm-dai-q6-dev.32771",
				"msm-dai-q6-dev.32772", "msm-dai-q6-dev.32773",
				"msm-dai-q6-dev.32770", "msm-dai-q6-dev.16394";
		asoc-codec = <&stub_codec>;
		asoc-codec-names = "msm-stub-codec.1";
		qcom,wsa-max-devs = <2>;
		qcom,wsa-devs = <&wsa881x_211>, <&wsa881x_212>,
				<&wsa881x_213>, <&wsa881x_214>;
		qcom,wsa-aux-dev-prefix = "SpkrRight", "SpkrLeft",
					  "SpkrRight", "SpkrLeft";
	};

* MSM8998 ASoC Machine driver

Required properties:
- compatible : "qcom,msm8998-asoc-snd-tasha" for tasha codec,
		"qcom,msm8998-asoc-snd-tavil" for tavil codec.
- qcom,model : The user-visible name of this sound card.
- qcom,tasha-mclk-clk-freq : MCLK frequency value for tasha codec
- qcom,tavil-mclk-clk-freq : MCLK frequency value for tavil codec
- qcom,audio-routing : A list of the connections between audio components.
- asoc-platform: This is phandle list containing the references to platform device
		 nodes that are used as part of the sound card dai-links.
- asoc-platform-names: This property contains list of platform names. The order of
		       the platform names should match to that of the phandle order
		       given in "asoc-platform".
- asoc-cpu: This is phandle list containing the references to cpu dai device nodes
	    that are used as part of the sound card dai-links.
- asoc-cpu-names: This property contains list of cpu dai names. The order of the
		  cpu dai names should match to that of the phandle order given
		  in "asoc-cpu". The cpu names are in the form of "%s.%d" form,
		  where the id (%d) field represents the back-end AFE port id that
		  this CPU dai is associated with.
- asoc-codec: This is phandle list containing the references to codec dai device
	      nodes that are used as part of the sound card dai-links.
- asoc-codec-names: This property contains list of codec dai names. The order of the
		    codec dai names should match to that of the phandle order given
		    in "asoc-codec".
Optional properties:
- qcom,mbhc-audio-jack-type : String to indicate the jack type on the hardware.
		Possible Values:
		4-pole-jack : Jack on the hardware is 4-pole.
		5-pole-jack : Jack on the hardware is 5-pole.
		6-pole-jack : Jack on the hardware is 6-pole.
- clock-names : clock name defined for external clock.
- clocks : external clock defined for codec clock.
- qcom,hph-en1-gpio : GPIO to enable HiFi amplifiers.
- qcom,hph-en0-gpio : GPIO to enable HiFi audio route to headset.
- qcom,wsa-max-devs : Maximum number of WSA881x devices present in the target
- qcom,wsa-devs : List of phandles for all possible WSA881x devices supported for the target
- qcom,wsa-aux-dev-prefix : Name prefix with Left/Right configuration for WSA881x device
- qcom,wcn-btfm : Property to specify if WCN BT/FM chip is used for the target
- qcom,msm-mbhc-usbc-audio-supported : Property to specify if analog audio feature is
				       enabled or not.
- qcom,usbc-analog-en1-gpio : EN1 GPIO to enable USB type-C analog audio
- qcom,usbc-analog-en2-gpio : EN2 GPIO to enable USB type-C analog audio
- qcom,usbc-analog-force_detect_gpio : Force detect GPIO to enable USB type-C analog audio

Example:

	sound-9335 {
	compatible = "qcom,msm8998-asoc-snd";
	qcom,model = "msm8998-tasha-snd-card";

	qcom,audio-routing =
		"RX_BIAS", "MCLK",
		"LDO_H", "MCLK",
		"AIF4 MAD", "MCLK",
		"ultrasound amp", "LINEOUT1",
		"ultrasound amp", "LINEOUT3",
		"AMIC1", "MIC BIAS1 Internal1",
		"MIC BIAS1 Internal1", "Handset Mic",
		"AMIC2", "MIC BIAS2 External",
		"MIC BIAS2 External", "Headset Mic",
		"AMIC3", "MIC BIAS2 External",
		"MIC BIAS2 External", "ANCRight Headset Mic",
		"AMIC4", "MIC BIAS2 External",
		"MIC BIAS2 External", "ANCLeft Headset Mic",
		"DMIC1", "MIC BIAS1 External",
		"MIC BIAS1 External", "Digital Mic1",
		"DMIC2", "MIC BIAS1 External",
		"MIC BIAS1 External", "Digital Mic2",
		"DMIC3", "MIC BIAS3 External",
		"MIC BIAS3 External", "Digital Mic3",
		"DMIC4", "MIC BIAS3 External",
		"MIC BIAS3 External", "Digital Mic4",
		"DMIC5", "MIC BIAS4 External",
		"MIC BIAS4 External", "Digital Mic5",
		"DMIC6", "MIC BIAS4 External",
		"MIC BIAS4 External", "Digital Mic6";

		qcom,msm-mbhc-hphl-swh = <0>;
		qcom,msm-mbhc-gnd-swh = <0>;
		qcom,tasha-mclk-clk-freq = <9600000>;
		asoc-platform = <&pcm0>, <&pcm1>, <&pcm2>, <&voip>, <&voice>,
				<&loopback>, <&compress>, <&hostless>,
				<&afe>, <&lsm>, <&routing>, <&cpe>, <&compr>,
				<&trans_loopback>;
		asoc-platform-names = "msm-pcm-dsp.0", "msm-pcm-dsp.1",
				"msm-pcm-dsp.2", "msm-voip-dsp",
				"msm-pcm-voice", "msm-pcm-loopback",
				"msm-compress-dsp", "msm-pcm-hostless",
				"msm-pcm-afe", "msm-lsm-client",
				"msm-pcm-routing", "msm-cpe-lsm",
				"msm-compr-dsp","msm-transcode-loopback";
		asoc-cpu = <&dai_hdmi>,
				<&sb_0_rx>, <&sb_0_tx>, <&sb_1_rx>, <&sb_1_tx>,
				<&sb_2_rx>, <&sb_2_tx>, <&sb_3_rx>, <&sb_3_tx>,
				<&sb_4_rx>, <&sb_4_tx>, <&sb_5_tx>,
				<&afe_pcm_rx>, <&afe_pcm_tx>, <&afe_proxy_rx>,
				<&afe_proxy_tx>, <&incall_record_rx>,
				<&incall_record_tx>, <&incall_music_rx>,
				<&incall_music_2_rx>, <&sb_5_rx>;
		asoc-cpu-names = "msm-dai-q6-hdmi.8",
				"msm-dai-q6-dev.16384", "msm-dai-q6-dev.16385",
				"msm-dai-q6-dev.16386", "msm-dai-q6-dev.16387",
				"msm-dai-q6-dev.16388", "msm-dai-q6-dev.16389",
				"msm-dai-q6-dev.16390", "msm-dai-q6-dev.16391",
				"msm-dai-q6-dev.16392", "msm-dai-q6-dev.16393",
				"msm-dai-q6-dev.16395", "msm-dai-q6-dev.224",
				"msm-dai-q6-dev.225", "msm-dai-q6-dev.241",
				"msm-dai-q6-dev.240", "msm-dai-q6-dev.32771",
				"msm-dai-q6-dev.32772", "msm-dai-q6-dev.32773",
				"msm-dai-q6-dev.32770", "msm-dai-q6-dev.16394";
		asoc-codec = <&stub_codec>;
		asoc-codec-names = "msm-stub-codec.1";
		qcom,wsa-max-devs = <2>;
		qcom,wsa-devs = <&wsa881x_211>, <&wsa881x_212>,
				<&wsa881x_213>, <&wsa881x_214>;
		qcom,wsa-aux-dev-prefix = "SpkrRight", "SpkrLeft",
					  "SpkrRight", "SpkrLeft";
		qcom,msm-mbhc-usbc-audio-supported = <1>;
		qcom,usbc-analog-en1-gpio = <&wcd_usbc_analog_en1_gpio>;
		qcom,usbc-analog-en2-gpio = <&tlmm 51 0>;
		qcom,usbc-analog-force_detect_gpio = <&wcd_usbc_analog_f_gpio>;
	};

* MSMSTUB ASoC Machine driver

Required properties:
- compatible : "qcom,msm8998-asoc-snd-stub" for MSM8998 target.
	       "qcom,sdm845-asoc-snd-stub" for SDM845 target.
- qcom,model : The user-visible name of this sound card.
- qcom,tasha-mclk-clk-freq : MCLK frequency value for tasha codec
- asoc-platform: This is phandle list containing the references to platform device
		 nodes that are used as part of the sound card dai-links.
- asoc-platform-names: This property contains list of platform names. The order of
		       the platform names should match to that of the phandle order
		       given in "asoc-platform".
- asoc-cpu: This is phandle list containing the references to cpu dai device nodes
	    that are used as part of the sound card dai-links.
- asoc-cpu-names: This property contains list of cpu dai names. The order of the
		  cpu dai names should match to that of the phandle order given
		  in "asoc-cpu". The cpu names are in the form of "%s.%d" form,
		  where the id (%d) field represents the back-end AFE port id that
		  this CPU dai is associated with.
- asoc-codec: This is phandle list containing the references to codec dai device
	      nodes that are used as part of the sound card dai-links.
- asoc-codec-names: This property contains list of codec dai names. The order of the
		    codec dai names should match to that of the phandle order given
		    in "asoc-codec".
Optional properties:
- qcom,wsa-max-devs : Maximum number of WSA881x devices present in the target

Example:

	sound_msm:sound-9335 {
		compatible = "qcom,msm8998-asoc-snd-stub";
		qcom,model = "msm8998-stub-snd-card";

		qcom,tasha-mclk-clk-freq = <9600000>;
		asoc-platform = <&pcm0>;
		asoc-platform-names = "msm-pcm-dsp.0";
		asoc-cpu = <&sb_0_rx>, <&sb_0_tx>;
		asoc-cpu-names = "msm-dai-q6-dev.16384", "msm-dai-q6-dev.16385";
		asoc-codec = <&stub_codec>;
		asoc-codec-names = "msm-stub-codec.1";
		qcom,wsa-max-devs = <0>;
	};

* WCD DSP manager driver

Required properties:
- compatible : "qcom,wcd-dsp-mgr"
- qcom,wdsp-components : This is phandle list containing the references to the
			 components of the manager driver. Manager driver will
			 register to component framework with these phandles.
- qcom,img-filename : String property to provide the dsp image file name that is
		     to be read from file system and downloaded to dsp memory
Optional properties:
- qcom,wdsp-cmpnt-dev-name : Property that manager driver will parse, but defined
			     in the child's DT entry that is given to manager driver
			     with phandle. This property will be used by the manager
			     driver in case the manager driver cannot match child's
			     of_node pointer to registered phandle.

Example:

	qcom,wcd-dsp-mgr {
		compatible = "qcom,wcd-dsp-mgr";
		qcom,wdsp-components = <&wcd934x_cdc 0>,
				       <&wcd_spi_0 1>,
				       <&glink_spi 2>;
		qcom,img-filename = "cpe_9340";
	};

Example of child node that would have qcom,wdsp-cmpnt-dev-name property

	wcd934x_cdc: tavil_codec {
		qcom,wdsp-cmpnt-dev-name = "tavil_codec";
	};

* SDM845 ASoC Machine driver

Required properties:
- compatible : "qcom,sdm845-asoc-snd-tavil"
- qcom,model : The user-visible name of this sound card.
- qcom,tavil-mclk-clk-freq : MCLK frequency value for tavil codec
- qcom,audio-routing : A list of the connections between audio components.
- asoc-platform: This is phandle list containing the references to platform device
		 nodes that are used as part of the sound card dai-links.
- asoc-platform-names: This property contains list of platform names. The order of
		       the platform names should match to that of the phandle order
		       given in "asoc-platform".
- asoc-cpu: This is phandle list containing the references to cpu dai device nodes
	    that are used as part of the sound card dai-links.
- asoc-cpu-names: This property contains list of cpu dai names. The order of the
		  cpu dai names should match to that of the phandle order given
		  in "asoc-cpu". The cpu names are in the form of "%s.%d" form,
		  where the id (%d) field represents the back-end AFE port id that
		  this CPU dai is associated with.
- asoc-codec: This is phandle list containing the references to codec dai device
	      nodes that are used as part of the sound card dai-links.
- asoc-codec-names: This property contains list of codec dai names. The order of the
		    codec dai names should match to that of the phandle order given
		    in "asoc-codec".
Optional properties:
- qcom,mbhc-audio-jack-type : String to indicate the jack type on the hardware.
		Possible Values:
		4-pole-jack : Jack on the hardware is 4-pole.
		5-pole-jack : Jack on the hardware is 5-pole.
		6-pole-jack : Jack on the hardware is 6-pole.
- clock-names : clock name defined for external clock.
- clocks : external clock defined for codec clock.
- qcom,msm-mbhc-hs-mic-max-threshold-mv : headset detection threshold. When micbias is
					  not set to 2.7v, need scale in driver.
- qcom,msm-mbhc-hs-mic-min-threshold-mv : headhpone detection threshold. When micbias is
					  not set to 2.7v, need scale in driver.
- qcom,hph-en1-gpio : GPIO to enable HiFi amplifiers.
- qcom,hph-en0-gpio : GPIO to enable HiFi audio route to headset.
- qcom,wsa-max-devs : Maximum number of WSA881x devices present in the target
- qcom,wsa-devs : List of phandles for all possible WSA881x devices supported for the target
- qcom,wsa-aux-dev-prefix : Name prefix with Left/Right configuration for WSA881x device
- qcom,wcn-btfm : Property to specify if WCN BT/FM chip is used for the target

Example:

	sound-tavil {
		compatible = "qcom,sdm845-asoc-snd-tavil";
		qcom,model = "sdm845-tavil-snd-card";
		qcom,ext-disp-audio-rx;
		qcom,wcn-btfm;
		qcom,mi2s-audio-intf;
		qcom,auxpcm-audio-intf;
		qcom,msm-mi2s-master = <1>, <1>, <1>, <1>;

		reg = <0x1711a000 0x4>,
		      <0x1711b000 0x4>,
		      <0x1711c000 0x4>,
		      <0x1711d000 0x4>;
		reg-names = "lpaif_pri_mode_muxsel",
			    "lpaif_sec_mode_muxsel",
			    "lpaif_tert_mode_muxsel",
			    "lpaif_quat_mode_muxsel";

		qcom,audio-routing =
			"RX_BIAS", "MCLK",
			"MADINPUT", "MCLK",
			"hifi amp", "LINEOUT1",
			"hifi amp", "LINEOUT2",
			"AMIC2", "MIC BIAS2",
			"MIC BIAS2", "Headset Mic",
			"AMIC3", "MIC BIAS2",
			"MIC BIAS2", "ANCRight Headset Mic",
			"AMIC4", "MIC BIAS2",
			"MIC BIAS2", "ANCLeft Headset Mic",
			"AMIC5", "MIC BIAS3",
			"MIC BIAS3", "Handset Mic",
			"DMIC0", "MIC BIAS1",
			"MIC BIAS1", "Digital Mic0",
			"DMIC1", "MIC BIAS1",
			"MIC BIAS1", "Digital Mic1",
			"DMIC2", "MIC BIAS3",
			"MIC BIAS3", "Digital Mic2",
			"DMIC3", "MIC BIAS3",
			"MIC BIAS3", "Digital Mic3",
			"DMIC4", "MIC BIAS4",
			"MIC BIAS4", "Digital Mic4",
			"DMIC5", "MIC BIAS4",
			"MIC BIAS4", "Digital Mic5",
			"SpkrLeft IN", "SPK1 OUT",
			"SpkrRight IN", "SPK2 OUT";

		qcom,msm-mbhc-hphl-swh = <0>;
		qcom,msm-mbhc-gnd-swh = <0>;
		qcom,msm-mbhc-hs-mic-max-threshold-mv = <1700>;
		qcom,msm-mbhc-hs-mic-min-threshold-mv = <50>;
		qcom,hph-en0-gpio = <&tavil_hph_en0>;
		qcom,hph-en1-gpio = <&tavil_hph_en1>;
		qcom,tavil-mclk-clk-freq = <9600000>;
		asoc-platform = <&pcm0>, <&pcm1>, <&pcm2>, <&voip>, <&voice>,
				<&loopback>, <&compress>, <&hostless>,
				<&afe>, <&lsm>, <&routing>, <&cpe>, <&compr>,
				<&pcm_noirq>;
		asoc-platform-names = "msm-pcm-dsp.0", "msm-pcm-dsp.1",
				"msm-pcm-dsp.2", "msm-voip-dsp",
				"msm-pcm-voice", "msm-pcm-loopback",
				"msm-compress-dsp", "msm-pcm-hostless",
				"msm-pcm-afe", "msm-lsm-client",
				"msm-pcm-routing", "msm-cpe-lsm",
				"msm-compr-dsp", "msm-pcm-dsp-noirq";
		asoc-cpu = <&dai_hdmi>, <&dai_dp>,
				<&dai_mi2s0>, <&dai_mi2s1>,
				<&dai_mi2s2>, <&dai_mi2s3>,
				<&dai_pri_auxpcm>, <&dai_sec_auxpcm>,
				<&dai_tert_auxpcm>, <&dai_quat_auxpcm>,
				<&sb_0_rx>, <&sb_0_tx>, <&sb_1_rx>, <&sb_1_tx>,
				<&sb_2_rx>, <&sb_2_tx>, <&sb_3_rx>, <&sb_3_tx>,
				<&sb_4_rx>, <&sb_4_tx>, <&sb_5_tx>,
				<&afe_pcm_rx>, <&afe_pcm_tx>, <&afe_proxy_rx>,
				<&afe_proxy_tx>, <&incall_record_rx>,
				<&incall_record_tx>, <&incall_music_rx>,
				<&incall_music_2_rx>, <&sb_5_rx>, <&sb_6_rx>,
				<&sb_7_rx>, <&sb_7_tx>, <&sb_8_tx>,
				<&usb_audio_rx>, <&usb_audio_tx>,
				<&dai_pri_tdm_rx_0>, <&dai_pri_tdm_tx_0>,
				<&dai_sec_tdm_rx_0>, <&dai_sec_tdm_tx_0>,
				<&dai_tert_tdm_rx_0>, <&dai_tert_tdm_tx_0>,
				<&dai_quat_tdm_rx_0>, <&dai_quat_tdm_tx_0>;
		asoc-cpu-names = "msm-dai-q6-hdmi.8",  "msm-dai-q6-dp.24608",
				"msm-dai-q6-mi2s.0", "msm-dai-q6-mi2s.1",
				"msm-dai-q6-mi2s.2", "msm-dai-q6-mi2s.3",
				"msm-dai-q6-auxpcm.1", "msm-dai-q6-auxpcm.2",
				"msm-dai-q6-auxpcm.3", "msm-dai-q6-auxpcm.4",
				"msm-dai-q6-dev.16384", "msm-dai-q6-dev.16385",
				"msm-dai-q6-dev.16386", "msm-dai-q6-dev.16387",
				"msm-dai-q6-dev.16388", "msm-dai-q6-dev.16389",
				"msm-dai-q6-dev.16390", "msm-dai-q6-dev.16391",
				"msm-dai-q6-dev.16392", "msm-dai-q6-dev.16393",
				"msm-dai-q6-dev.16395", "msm-dai-q6-dev.224",
				"msm-dai-q6-dev.225", "msm-dai-q6-dev.241",
				"msm-dai-q6-dev.240", "msm-dai-q6-dev.32771",
				"msm-dai-q6-dev.32772", "msm-dai-q6-dev.32773",
				"msm-dai-q6-dev.32770", "msm-dai-q6-dev.16394",
				"msm-dai-q6-dev.16396", "msm-dai-q6-dev.16398",
				"msm-dai-q6-dev.16399", "msm-dai-q6-dev.16401",
				"msm-dai-q6-dev.28672", "msm-dai-q6-dev.28673",
				"msm-dai-q6-tdm.36864", "msm-dai-q6-tdm.36865",
				"msm-dai-q6-tdm.36880", "msm-dai-q6-tdm.36881",
				"msm-dai-q6-tdm.36896", "msm-dai-q6-tdm.36897",
				"msm-dai-q6-tdm.36912", "msm-dai-q6-tdm.36913";
		asoc-codec = <&stub_codec>, <&ext_disp_audio_codec>;
		asoc-codec-names = "msm-stub-codec.1",
				   "msm-ext-disp-audio-codec-rx";
		qcom,wsa-max-devs = <2>;
		qcom,wsa-devs = <&wsa881x_0211>, <&wsa881x_0212>,
				<&wsa881x_0213>, <&wsa881x_0214>;
		qcom,wsa-aux-dev-prefix = "SpkrLeft", "SpkrRight",
					  "SpkrLeft", "SpkrRight";
	};

* SDM670 ASoC Machine driver

Required properties:
- compatible : "qcom,sdm670-asoc-snd"
- qcom,model : The user-visible name of this sound card.
- qcom,msm-hs-micbias-type : This property is used to recognize the headset
  micbias type, internal or external.
- qcom,msm-mbhc-hphl-swh: This property is used to distinguish headset HPHL
switch type on target typically the switch type will be normally open or
normally close, value for this property 0 for normally close and 1 for
normally open.
-  qcom,msm-mbhc-gnd-swh: This property is used to distinguish headset GND
switch type on target typically the switch type will be normally open or
normally close, value for this property 0 for normally close and 1 for
normally open.
- qcom,audio-routing : A list of the connections between audio components.
- qcom,msm-gpios : Lists down all the gpio sets that are supported.
- qcom,pinctrl-names : Lists all the possible combinations of the gpio sets
mentioned in qcom,msm-gpios.
- pinctrl-names : The combinations of gpio sets from above that are supported in
the flavor.
- pinctrl-# : Pinctrl states as mentioned in pinctrl-names.

Optional properties:
- qcom,cdc-us-euro-gpios : GPIO on which gnd/mic swap signal is coming.
- qcom,msm-micbias1-ext-cap : Boolean. Enable micbias1 external
capacitor mode.
- qcom,msm-micbias2-ext-cap : Boolean. Enable micbias2 external
capacitor mode.
- qcom,wsa-disable : Boolean. Disables WSA speaker dailinks from sound node.
- qcom,msm-spk-ext-pa : GPIO which enables external speaker pa.
- qcom,msm-mclk-freq : This property is used to inform machine driver about
mclk frequency needs to be configured for internal and external PA.
- asoc-platform: This is phandle list containing the references to platform device
		 nodes that are used as part of the sound card dai-links.
- asoc-platform-names: This property contains list of platform names. The order of
		       the platform names should match to that of the phandle order
		       given in "asoc-platform".
- asoc-cpu: This is phandle list containing the references to cpu dai device nodes
	    that are used as part of the sound card dai-links.
- asoc-cpu-names: This property contains list of cpu dai names. The order of the
		  cpu dai names should match to that of the phandle order given.
- asoc-codec: This is phandle list containing the references to codec dai device
	nodes that are used as part of the sound card dai-links.
- asoc-codec-names: This property contains list of codec dai names. The order of the
	codec dai names should match to that of the phandle order given
	in "asoc-codec".
- qcom,wsa-max-devs : Maximum number of WSA881x devices present in the target
- qcom,wsa-devs : List of phandles for all possible WSA881x devices supported for the target
- qcom,wsa-aux-dev-prefix : Name prefix with Left/Right configuration for WSA881x device
- qcom,cdc-pdm-gpios : phandle for pdm gpios.
- qcom,cdc-comp-gpios : phandle for compander gpios.
- qcom,cdc-dmic-gpios : phandle for Digital mic clk and data gpios.
- qcom,cdc-sdw-gpios : phandle for soundwire clk and data gpios.
- qcom,pri-mi2s-gpios : phandle for primary MI2S clk, word select and data gpios.
- qcom,sec-mi2s-gpios : phandle for secondary MI2S clk, word select and data gpios.
- qcom,tert-mi2s-gpios : phandle for tertiary MI2S clk, word select and data gpios.
- qcom,quat-mi2s-gpios : phandle for quaternary MI2S clk, word select and data gpios.
- qcom,quin-mi2s-gpios : phandle for quinary MI2S clk, word select and data gpios.
- qcom,msm-mbhc-moist-cfg: This property is used to set moisture detection
		threshold values for different codecs. First parameter is V(voltage)
		second one is i(current), third one is r (resistance). Depending on the
		codec set corresponding element in array and set others to 0.

Example:
	 sound {
		compatible = "qcom,sdm670-asoc-snd";
		qcom,model = "sdm670-snd-card";
		qcom,msm-mclk-freq = <9600000>;
		qcom,msm-mbhc-hphl-swh = <0>;
		qcom,msm-mbhc-gnd-swh = <0>;
		qcom,msm-hs-micbias-type = "internal";
		qcom,msm-micbias1-ext-cap;
		qcom,audio-routing =
			"RX_BIAS", "MCLK",
			"SPK_RX_BIAS", "MCLK",
			"INT_LDO_H", "MCLK",
			"MIC BIAS External", "Handset Mic",
			"MIC BIAS Internal2", "Headset Mic",
			"MIC BIAS External", "Secondary Mic",
			"AMIC1", "MIC BIAS External",
			"AMIC2", "MIC BIAS Internal2",
			"AMIC3", "MIC BIAS External";
		qcom,cdc-us-euro-gpios = <&msm_gpio 63 0>;
		qcom,cdc-pdm-gpios = <&cdc_pdm_gpios>;
		qcom,cdc-comp-gpios = <&cdc_comp_gpios>;
		qcom,cdc-dmic-gpios = <&cdc_dmic_gpios>;
		qcom,cdc-sdw-gpios = <&cdc_sdw_gpios>;
		asoc-platform = <&pcm0>, <&pcm1>, <&voip>, <&voice>,
				<&loopback>, <&compress>, <&hostless>,
				<&afe>, <&lsm>, <&routing>, <&lpa>;
		asoc-platform-names = "msm-pcm-dsp.0", "msm-pcm-dsp.1",
				"msm-voip-dsp", "msm-pcm-voice", "msm-pcm-loopback",
				"msm-compress-dsp", "msm-pcm-hostless", "msm-pcm-afe",
				"msm-lsm-client", "msm-pcm-routing", "msm-pcm-lpa";
		asoc-cpu = <&dai_pri_auxpcm>, <&dai_hdmi>,
				<&dai_mi2s0>, <&dai_mi2s1>, <&dai_mi2s2>, <&dai_mi2s3>,
				<&sb_0_rx>, <&sb_0_tx>, <&sb_1_rx>, <&sb_1_tx>,
				<&sb_3_rx>, <&sb_3_tx>, <&sb_4_rx>, <&sb_4_tx>,
				<&bt_sco_rx>, <&bt_sco_tx>, <&int_fm_rx>, <&int_fm_tx>,
				<&afe_pcm_rx>, <&afe_pcm_tx>, <&afe_proxy_rx>, <&afe_proxy_tx>,
				<&incall_record_rx>, <&incall_record_tx>, <&incall_music_rx>,
				<&incall_music_2_rx>;
		asoc-cpu-names = "msm-dai-q6-auxpcm.1", "msm-dai-q6-hdmi.8",
				"msm-dai-q6-mi2s.0", "msm-dai-q6-mi2s.1",
				"msm-dai-q6-mi2s.2", "msm-dai-q6-mi2s.3",
				"msm-dai-q6-dev.16384", "msm-dai-q6-dev.16385",
				"msm-dai-q6-dev.16386", "msm-dai-q6-dev.16387",
				"msm-dai-q6-dev.16390", "msm-dai-q6-dev.16391",
				"msm-dai-q6-dev.16392", "msm-dai-q6-dev.16393",
				"msm-dai-q6-dev.12288", "msm-dai-q6-dev.12289",
				"msm-dai-q6-dev.12292", "msm-dai-q6-dev.12293",
				"msm-dai-q6-dev.224", "msm-dai-q6-dev.225",
				"msm-dai-q6-dev.241", "msm-dai-q6-dev.240",
				"msm-dai-q6-dev.32771", "msm-dai-q6-dev.32772",
				"msm-dai-q6-dev.32773", "msm-dai-q6-dev.32770";
		asoc-codec = <&stub_codec>;
		asoc-codec-names = "msm-stub-codec.1";
		qcom,wsa-max-devs = <2>;
		qcom,wsa-devs = <&wsa881x_211>, <&wsa881x_212>,
				<&wsa881x_213>, <&wsa881x_214>;
		qcom,wsa-aux-dev-prefix = "SpkrRight", "SpkrLeft",
					  "SpkrRight", "SpkrLeft";
	};

* SDM670 ASoC Slimbus Machine driver

Required properties:
- compatible : "qcom,sdm670-asoc-snd-tasha" for tasha codec,
		"qcom,sdm670-asoc-snd-tavil" for tavil codec.
- qcom,model : The user-visible name of this sound card.
- qcom,msm-mclk-freq : MCLK frequency value for external codec
- qcom,msm-gpios : Lists down all the gpio sets that are supported.
- qcom,pinctrl-names : Lists all the possible combinations of the gpio sets
mentioned in qcom,msm-gpios. Say we have 2^N combinations for N GPIOs,
this would list all the 2^N combinations.
- pinctrl-names : The combinations of gpio sets from above that are supported in
the flavor. This can be sometimes same as qcom, pinctrl-names i.e with 2^N
combinations or will have less incase if some combination is not supported.
- pinctrl-# : Pinctrl states as mentioned in pinctrl-names.
- qcom,audio-routing : A list of the connections between audio components.
- asoc-platform: This is phandle list containing the references to platform device
		 nodes that are used as part of the sound card dai-links.
- asoc-platform-names: This property contains list of platform names. The order of
		       the platform names should match to that of the phandle order
		       given in "asoc-platform".
- asoc-cpu: This is phandle list containing the references to cpu dai device nodes
	    that are used as part of the sound card dai-links.
- asoc-cpu-names: This property contains list of cpu dai names. The order of the
		  cpu dai names should match to that of the phandle order given
		  in "asoc-cpu". The cpu names are in the form of "%s.%d" form,
		  where the id (%d) field represents the back-end AFE port id that
		  this CPU dai is associated with.
- asoc-codec: This is phandle list containing the references to codec dai device
	      nodes that are used as part of the sound card dai-links.
- asoc-codec-names: This property contains list of codec dai names. The order of the
		    codec dai names should match to that of the phandle order given
		    in "asoc-codec".
Optional properties:
- qcom,cdc-us-euro-gpios : GPIO on which gnd/mic swap signal is coming.
- clock-names : clock name defined for external clock.
- clocks : external clock defined for codec clock.
- qcom,wsa-max-devs : Maximum number of WSA881x devices present in the target
- qcom,wsa-devs : List of phandles for all possible WSA881x devices supported for the target
- qcom,wsa-aux-dev-prefix : Name prefix with Left/Right configuration for WSA881x device
- qcom,pri-mi2s-gpios : phandle for primary MI2S clk, word select and data gpios.
- qcom,sec-mi2s-gpios : phandle for secondary MI2S clk, word select and data gpios.
- qcom,tert-mi2s-gpios : phandle for tertiary MI2S clk, word select and data gpios.
- qcom,quat-mi2s-gpios : phandle for quaternary MI2S clk, word select and data gpios.
- qcom,quin-mi2s-gpios : phandle for quinary MI2S clk, word select and data gpios.

Example:

	sound-9335 {
	compatible = "qcom,sdm670-asoc-snd-tasha";
	qcom,model = "sdm670-tasha-snd-card";

	qcom,audio-routing =
		"RX_BIAS", "MCLK",
		"LDO_H", "MCLK",
		"AIF4 MAD", "MCLK",
		"ultrasound amp", "LINEOUT1",
		"ultrasound amp", "LINEOUT3",
		"AMIC1", "MIC BIAS1 Internal1",
		"MIC BIAS1 Internal1", "Handset Mic",
		"AMIC2", "MIC BIAS2 External",
		"MIC BIAS2 External", "Headset Mic",
		"AMIC3", "MIC BIAS2 External",
		"MIC BIAS2 External", "ANCRight Headset Mic",
		"AMIC4", "MIC BIAS2 External",
		"MIC BIAS2 External", "ANCLeft Headset Mic",
		"DMIC1", "MIC BIAS1 External",
		"MIC BIAS1 External", "Digital Mic1",
		"DMIC2", "MIC BIAS1 External",
		"MIC BIAS1 External", "Digital Mic2",
		"DMIC3", "MIC BIAS3 External",
		"MIC BIAS3 External", "Digital Mic3",
		"DMIC4", "MIC BIAS3 External",
		"MIC BIAS3 External", "Digital Mic4",
		"DMIC5", "MIC BIAS4 External",
		"MIC BIAS4 External", "Digital Mic5",
		"DMIC6", "MIC BIAS4 External",
		"MIC BIAS4 External", "Digital Mic6";

		qcom,msm-mbhc-hphl-swh = <0>;
		qcom,msm-mbhc-gnd-swh = <0>;
		qcom,msm-mclk-freq = <9600000>;
		qcom,msm-gpios =
			"slim",
			"us_eu_gpio";
		qcom,pinctrl-names =
			"all_off",
			"slim_act",
			"us_eu_gpio_act",
			"slim_us_eu_gpio_act";
		pinctrl-names =
			"all_off",
			"slim_act",
			"us_eu_gpio_act",
			"slim_us_eu_gpio_act";
		pinctrl-0 = <&cdc_slim_lines_sus &cross_conn_det_sus>;
		pinctrl-1 = <&cdc_slim_lines_act &cross_conn_det_sus>;
		pinctrl-2 = <&cdc_slim_lines_sus &cross_conn_det_act>;
		pinctrl-3 = <&cdc_slim_lines_act &cross_conn_det_act>;
		qcom,cdc-us-euro-gpios = <&msm_gpio 63 0>;
		asoc-platform = <&pcm0>, <&pcm1>, <&pcm2>, <&voip>, <&voice>,
				<&loopback>, <&compress>, <&hostless>,
				<&afe>, <&lsm>, <&routing>, <&cpe>, <&compr>;
		asoc-platform-names = "msm-pcm-dsp.0", "msm-pcm-dsp.1",
				"msm-pcm-dsp.2", "msm-voip-dsp",
				"msm-pcm-voice", "msm-pcm-loopback",
				"msm-compress-dsp", "msm-pcm-hostless",
				"msm-pcm-afe", "msm-lsm-client",
				"msm-pcm-routing", "msm-cpe-lsm",
				"msm-compr-dsp";
		asoc-cpu = <&dai_hdmi>,
				<&sb_0_rx>, <&sb_0_tx>, <&sb_1_rx>, <&sb_1_tx>,
				<&sb_2_rx>, <&sb_2_tx>, <&sb_3_rx>, <&sb_3_tx>,
				<&sb_4_rx>, <&sb_4_tx>, <&sb_5_tx>,
				<&afe_pcm_rx>, <&afe_pcm_tx>, <&afe_proxy_rx>,
				<&afe_proxy_tx>, <&incall_record_rx>,
				<&incall_record_tx>, <&incall_music_rx>,
				<&incall_music_2_rx>, <&sb_5_rx>;
		asoc-cpu-names = "msm-dai-q6-hdmi.8",
				"msm-dai-q6-dev.16384", "msm-dai-q6-dev.16385",
				"msm-dai-q6-dev.16386", "msm-dai-q6-dev.16387",
				"msm-dai-q6-dev.16388", "msm-dai-q6-dev.16389",
				"msm-dai-q6-dev.16390", "msm-dai-q6-dev.16391",
				"msm-dai-q6-dev.16392", "msm-dai-q6-dev.16393",
				"msm-dai-q6-dev.16395", "msm-dai-q6-dev.224",
				"msm-dai-q6-dev.225", "msm-dai-q6-dev.241",
				"msm-dai-q6-dev.240", "msm-dai-q6-dev.32771",
				"msm-dai-q6-dev.32772", "msm-dai-q6-dev.32773",
				"msm-dai-q6-dev.32770", "msm-dai-q6-dev.16394";
		asoc-codec = <&stub_codec>;
		asoc-codec-names = "msm-stub-codec.1";
		qcom,wsa-max-devs = <2>;
		qcom,wsa-devs = <&wsa881x_211>, <&wsa881x_212>,
				<&wsa881x_213>, <&wsa881x_214>;
		qcom,wsa-aux-dev-prefix = "SpkrRight", "SpkrLeft",
					  "SpkrRight", "SpkrLeft";
	};

* QCS605 LC  ASoC Machine driver

Required properties:
- compatible : "qcom,qcs605-dig-asoc-snd"
- qcom,model : The user-visible name of this sound card.
- qcom,audio-routing : A list of the connections between audio components.
- qcom,msm-gpios : Lists down all the gpio sets that are supported.
- qcom,pinctrl-names : Lists all the possible combinations of the gpio sets
mentioned in qcom,msm-gpios.
- pinctrl-names : The combinations of gpio sets from above that are supported in
the flavor.
- pinctrl-# : Pinctrl states as mentioned in pinctrl-names.

Optional properties:
- qcom,wsa-disable : Boolean. Disables WSA speaker dailinks from sound node.
- qcom,msm-spk-ext-pa : GPIO which enables external speaker pa.
- qcom,msm-mclk-freq : This property is used to inform machine driver about
mclk frequency needs to be configured for internal and external PA.
- asoc-platform: This is phandle list containing the references to platform device
		 nodes that are used as part of the sound card dai-links.
- asoc-platform-names: This property contains list of platform names. The order of
		       the platform names should match to that of the phandle order
		       given in "asoc-platform".
- asoc-cpu: This is phandle list containing the references to cpu dai device nodes
	    that are used as part of the sound card dai-links.
- asoc-cpu-names: This property contains list of cpu dai names. The order of the
		  cpu dai names should match to that of the phandle order given.
- asoc-codec: This is phandle list containing the references to codec dai device
	nodes that are used as part of the sound card dai-links.
- asoc-codec-names: This property contains list of codec dai names. The order of the
	codec dai names should match to that of the phandle order given
	in "asoc-codec".
- qcom,wsa-max-devs : Maximum number of WSA881x devices present in the target
- qcom,wsa-devs : List of phandles for all possible WSA881x devices supported for the target
- qcom,wsa-aux-dev-prefix : Name prefix with Left/Right configuration for WSA881x device
- qcom,cdc-dmic-gpios : phandle for Digital mic clk and data gpios.
- qcom,cdc-sdw-gpios : phandle for soundwire clk and data gpios.
- qcom,pri-mi2s-gpios : phandle for primary MI2S clk, word select and data gpios.
- qcom,sec-mi2s-gpios : phandle for secondary MI2S clk, word select and data gpios.
- qcom,tert-mi2s-gpios : phandle for tertiary MI2S clk, word select and data gpios.
- qcom,quat-mi2s-gpios : phandle for quaternary MI2S clk, word select and data gpios.
- qcom,quin-mi2s-gpios : phandle for quinary MI2S clk, word select and data gpios.

Example:
	 sound {
		compatible = "qcom,qcs605-dig-asoc-snd";
		qcom,model = "qcs605-lc-snd-card";
		qcom,audio-routing =
			"RX_BIAS", "INT_MCLK0",
			"SPK_RX_BIAS", "INT_MCLK0",
			"DMIC1", "DIGITAL_REGULATOR",
			"DIGITAL_REGULATOR", "Digital Mic1",
			"DMIC2", "DIGITAL_REGULATOR",
			"DIGITAL_REGULATOR", "Digital Mic2",
			"DMIC3", "DIGITAL_REGULATOR",
			"DIGITAL_REGULATOR", "Digital Mic3",
			"DMIC4", "DIGITAL_REGULATOR",
			"DIGITAL_REGULATOR", "Digital Mic4",
			"SpkrLeft IN", "SPK1 OUT",
			"SpkrRight IN", "SPK2 OUT";

		qcom,msm-mi2s-master = <1>, <1>, <1>, <1>, <1>;
		qcom,msm-mclk-freq = <9600000>;
		qcom,cdc-dmic-gpios = <&cdc_dmic_gpios>;

		asoc-codec = <&stub_codec>, <&msm_digital_codec>,
				<&msm_sdw_codec>;
		asoc-codec-names = "msm-stub-codec.1", "msm-dig-codec",
					"msm_sdw_codec";

		qcom,wsa-max-devs = <2>;
		qcom,wsa-devs = <&wsa881x_211_en>, <&wsa881x_212_en>,
				<&wsa881x_213_en>, <&wsa881x_214_en>;
		qcom,wsa-aux-dev-prefix = "SpkrLeft", "SpkrRight",
					"SpkrLeft", "SpkrRight";
	}

* QCS605 IPcamera  ASoC Machine driver

Required properties:
- compatible : "qcom,qcs605-asoc-snd-tavil"
- qcom,model : The user-visible name of this sound card.
- qcom,audio-routing : A list of the connections between audio components.
- qcom,msm-gpios : Lists down all the gpio sets that are supported.
- qcom,pinctrl-names : Lists all the possible combinations of the gpio sets
mentioned in qcom,msm-gpios.
- pinctrl-names : The combinations of gpio sets from above that are supported in
the flavor.
- pinctrl-# : Pinctrl states as mentioned in pinctrl-names.

Optional properties:
- qcom,wsa-disable : Boolean. Disables WSA speaker dailinks from sound node.
- qcom,msm-spk-ext-pa : GPIO which enables external speaker pa.
- qcom,msm-mclk-freq : This property is used to inform machine driver about
mclk frequency needs to be configured for internal and external PA.
- asoc-platform: This is phandle list containing the references to platform device
		 nodes that are used as part of the sound card dai-links.
- asoc-platform-names: This property contains list of platform names. The order of
		       the platform names should match to that of the phandle order
		       given in "asoc-platform".
- asoc-cpu: This is phandle list containing the references to cpu dai device nodes
	    that are used as part of the sound card dai-links.
- asoc-cpu-names: This property contains list of cpu dai names. The order of the
		  cpu dai names should match to that of the phandle order given.
- asoc-codec: This is phandle list containing the references to codec dai device
	nodes that are used as part of the sound card dai-links.
- asoc-codec-names: This property contains list of codec dai names. The order of the
	codec dai names should match to that of the phandle order given
	in "asoc-codec".
- qcom,wsa-max-devs : Maximum number of WSA881x devices present in the target
- qcom,wsa-devs : List of phandles for all possible WSA881x devices supported for the target
- qcom,wsa-aux-dev-prefix : Name prefix with Left/Right configuration for WSA881x device
- qcom,cdc-dmic-gpios : phandle for Digital mic clk and data gpios.
- qcom,cdc-sdw-gpios : phandle for soundwire clk and data gpios.
- qcom,pri-mi2s-gpios : phandle for primary MI2S clk, word select and data gpios.
- qcom,sec-mi2s-gpios : phandle for secondary MI2S clk, word select and data gpios.
- qcom,tert-mi2s-gpios : phandle for tertiary MI2S clk, word select and data gpios.
- qcom,quat-mi2s-gpios : phandle for quaternary MI2S clk, word select and data gpios.
- qcom,quin-mi2s-gpios : phandle for quinary MI2S clk, word select and data gpios.

Example:
	 sound {
		compatible = "qcom,qcs605-asoc-snd-tavil";
		qcom,model = "qcs605-tavil-snd-card";
		qcom,audio-routing =
			"RX_BIAS", "INT_MCLK0",
			"SPK_RX_BIAS", "INT_MCLK0",
			"DMIC1", "DIGITAL_REGULATOR",
			"DIGITAL_REGULATOR", "Digital Mic1",
			"DMIC2", "DIGITAL_REGULATOR",
			"DIGITAL_REGULATOR", "Digital Mic2",
			"DMIC3", "DIGITAL_REGULATOR",
			"DIGITAL_REGULATOR", "Digital Mic3",
			"DMIC4", "DIGITAL_REGULATOR",
			"DIGITAL_REGULATOR", "Digital Mic4",
			"SpkrLeft IN", "SPK1 OUT",
			"SpkrRight IN", "SPK2 OUT";

		qcom,msm-mi2s-master = <1>, <1>, <1>, <1>, <1>;
		qcom,msm-mclk-freq = <9600000>;
		qcom,msm-gpios =
			"slim",
			"us_eu_gpio";
		qcom,pinctrl-names =
			"all_off",
			"slim_act",
			"us_eu_gpio_act",
			"slim_us_eu_gpio_act";
		pinctrl-names =
			"all_off",
			"slim_act",
			"us_eu_gpio_act",
			"slim_us_eu_gpio_act";
		pinctrl-0 = <&cdc_slim_lines_sus &cross_conn_det_sus>;
		pinctrl-1 = <&cdc_slim_lines_act &cross_conn_det_sus>;
		pinctrl-2 = <&cdc_slim_lines_sus &cross_conn_det_act>;
		pinctrl-3 = <&cdc_slim_lines_act &cross_conn_det_act>;
		qcom,cdc-dmic-gpios = <&cdc_dmic_gpios>;

		asoc-codec = <&stub_codec>, <&msm_digital_codec>,
				<&msm_sdw_codec>;
		asoc-codec-names = "msm-stub-codec.1", "msm-dig-codec",
					"msm_sdw_codec";

		qcom,wsa-max-devs = <2>;
		qcom,wsa-devs = <&wsa881x_211_en>, <&wsa881x_212_en>,
				<&wsa881x_213_en>, <&wsa881x_214_en>;
		qcom,wsa-aux-dev-prefix = "SpkrLeft", "SpkrRight",
					"SpkrLeft", "SpkrRight";
	}