/* Copyright (c) 2020, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

&soc {

	qcom,blackghost {
		compatible = "qcom,pil-blackghost";
		qcom,pil-force-shutdown;
		qcom,firmware-name = "bg-wear";
		/* GPIO inputs from blackghost */
		qcom,bg2ap-status-gpio = <&tlmm 44 0>;
		qcom,bg2ap-errfatal-gpio = <&tlmm 72 0>;
		/* GPIO output to blackghost */
		qcom,ap2bg-status-gpio = <&tlmm 61 0>;
		qcom,ap2bg-errfatal-gpio = <&tlmm 62 0>;
	};

	qcom,msm-ssc-sensors {
		compatible = "qcom,msm-ssc-sensors";
	};

	qcom,glink-bgcom-xprt-bg {
		compatible = "qcom,glink-bgcom-xprt";
		label = "bg";
		qcom,qos-config = <&glink_qos_bg>;
		qcom,ramp-time = <0x10>,
				     <0x20>,
				     <0x30>,
				     <0x40>;
	};

	glink_qos_bg: qcom,glink-qos-config-bg {
		compatible = "qcom,glink-qos-config";
		qcom,flow-info = <0x80 0x0>,
				 <0x70 0x1>,
				 <0x60 0x2>,
				 <0x50 0x3>;
		qcom,mtu-size = <0x800>;
		qcom,tput-stats-cycle = <0xa>;
	};

	qcom,glink_pkt {
		compatible = "qcom,glinkpkt";

		qcom,glinkpkt-bg-daemon {
			qcom,glinkpkt-transport = "bgcom";
			qcom,glinkpkt-edge = "bg";
			qcom,glinkpkt-ch-name = "bg-daemon";
			qcom,glinkpkt-dev-name = "glink_pkt_bg_daemon";
		};

		qcom,glinkpkt-bg-daemon-ctrl {
			qcom,glinkpkt-transport = "bgcom";
			qcom,glinkpkt-edge = "bg";
			qcom,glinkpkt-ch-name = "bg-daemon-ctl";
			qcom,glinkpkt-dev-name = "glink_pkt_bg_daemon_ctrl";
		};

		qcom,glinkpkt-bg-display-ctrl {
			qcom,glinkpkt-transport = "bgcom";
			qcom,glinkpkt-edge = "bg";
			qcom,glinkpkt-ch-name = "display-ctrl";
			qcom,glinkpkt-dev-name = "glink_pkt_bg_display_ctrl";
		};

		qcom,glinkpkt-bg-display-data {
			qcom,glinkpkt-transport = "bgcom";
			qcom,glinkpkt-edge = "bg";
			qcom,glinkpkt-ch-name = "display-data";
			qcom,glinkpkt-dev-name = "glink_pkt_bg_display_data";
		};

		qcom,glinkpkt-bg-rsb-ctrl {
			qcom,glinkpkt-transport = "bgcom";
			qcom,glinkpkt-edge = "bg";
			qcom,glinkpkt-ch-name = "RSB_CTRL";
			qcom,glinkpkt-dev-name = "glink_pkt_bg_rsb_ctrl";
		};

		qcom,glinkpkt-bg-sso-ctrl {
			qcom,glinkpkt-transport = "bgcom";
			qcom,glinkpkt-edge = "bg";
			qcom,glinkpkt-ch-name = "sso-ctrl";
			qcom,glinkpkt-dev-name = "glink_pkt_bg_sso_ctrl";
		};

		qcom,glinkpkt-bg-buzzer-ctrl {
			qcom,glinkpkt-transport = "bgcom";
			qcom,glinkpkt-edge = "bg";
			qcom,glinkpkt-ch-name = "buzzer-ctrl";
			qcom,glinkpkt-dev-name = "glink_pkt_bg_buzzer_ctrl";
		};
	};

	spi_3: spi@78b7000 {  /* BLSP1 QUP3*/
		status = "ok";
		qcom,bg-spi {
			compatible = "qcom,bg-spi";
			reg = <0>;
			spi-max-frequency = <16000000>;
			interrupt-parent = <&tlmm>;
			qcom,irq-gpio = <&tlmm 43 1>;
		};
	};

	i2c_3: i2c@78b7000 { /* BLSP1 QUP3 */
		status = "disabled";
	};

	qcom,bg-rsb {
		compatible = "qcom,bg-rsb";
		vdd-ldo1-supply = <&pm660_l11>;
		qcom,bg-rsb-gpio = <&tlmm 40 1>;
		qcom,rsb-use-msm-gpio;
	};

	qcom,bg-daemon {
		compatible = "qcom,bg-daemon";
		qcom,bg-reset-gpio = <&pm660_gpios 5 0>;
		ssr-reg1-supply = <&pm660_l3>;
		ssr-reg2-supply = <&pm660_l9>;
	};
};