[MAC80211]: remove management interface
Removes the management interface since it is only required
for hostapd/userspace MLME, will not be in the final tree
at least in this form and hostapd/userspace MLME currently
do not work against this tree anyway.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/net/mac80211/ieee80211.c b/net/mac80211/ieee80211.c
index 373e8b7..804da5e 100644
--- a/net/mac80211/ieee80211.c
+++ b/net/mac80211/ieee80211.c
@@ -24,7 +24,6 @@
#include <net/net_namespace.h>
#include <net/cfg80211.h>
-#include "ieee80211_common.h"
#include "ieee80211_i.h"
#include "ieee80211_rate.h"
#include "wep.h"
@@ -123,151 +122,6 @@
ieee80211_configure_filter(local);
}
-/* management interface */
-
-static void
-ieee80211_fill_frame_info(struct ieee80211_local *local,
- struct ieee80211_frame_info *fi,
- struct ieee80211_rx_status *status)
-{
- if (status) {
- struct timespec ts;
- struct ieee80211_rate *rate;
-
- jiffies_to_timespec(jiffies, &ts);
- fi->hosttime = cpu_to_be64((u64) ts.tv_sec * 1000000 +
- ts.tv_nsec / 1000);
- fi->mactime = cpu_to_be64(status->mactime);
- switch (status->phymode) {
- case MODE_IEEE80211A:
- fi->phytype = htonl(ieee80211_phytype_ofdm_dot11_a);
- break;
- case MODE_IEEE80211B:
- fi->phytype = htonl(ieee80211_phytype_dsss_dot11_b);
- break;
- case MODE_IEEE80211G:
- fi->phytype = htonl(ieee80211_phytype_pbcc_dot11_g);
- break;
- default:
- fi->phytype = htonl(0xAAAAAAAA);
- break;
- }
- fi->channel = htonl(status->channel);
- rate = ieee80211_get_rate(local, status->phymode,
- status->rate);
- if (rate) {
- fi->datarate = htonl(rate->rate);
- if (rate->flags & IEEE80211_RATE_PREAMBLE2) {
- if (status->rate == rate->val)
- fi->preamble = htonl(2); /* long */
- else if (status->rate == rate->val2)
- fi->preamble = htonl(1); /* short */
- } else
- fi->preamble = htonl(0);
- } else {
- fi->datarate = htonl(0);
- fi->preamble = htonl(0);
- }
-
- fi->antenna = htonl(status->antenna);
- fi->priority = htonl(0xffffffff); /* no clue */
- fi->ssi_type = htonl(ieee80211_ssi_raw);
- fi->ssi_signal = htonl(status->ssi);
- fi->ssi_noise = 0x00000000;
- fi->encoding = 0;
- } else {
- /* clear everything because we really don't know.
- * the msg_type field isn't present on monitor frames
- * so we don't know whether it will be present or not,
- * but it's ok to not clear it since it'll be assigned
- * anyway */
- memset(fi, 0, sizeof(*fi) - sizeof(fi->msg_type));
-
- fi->ssi_type = htonl(ieee80211_ssi_none);
- }
- fi->version = htonl(IEEE80211_FI_VERSION);
- fi->length = cpu_to_be32(sizeof(*fi) - sizeof(fi->msg_type));
-}
-
-/* this routine is actually not just for this, but also
- * for pushing fake 'management' frames into userspace.
- * it shall be replaced by a netlink-based system. */
-void
-ieee80211_rx_mgmt(struct ieee80211_local *local, struct sk_buff *skb,
- struct ieee80211_rx_status *status, u32 msg_type)
-{
- struct ieee80211_frame_info *fi;
- const size_t hlen = sizeof(struct ieee80211_frame_info);
- struct net_device *dev = local->apdev;
-
- skb->dev = dev;
-
- if (skb_headroom(skb) < hlen) {
- I802_DEBUG_INC(local->rx_expand_skb_head);
- if (pskb_expand_head(skb, hlen, 0, GFP_ATOMIC)) {
- dev_kfree_skb(skb);
- return;
- }
- }
-
- fi = (struct ieee80211_frame_info *) skb_push(skb, hlen);
-
- ieee80211_fill_frame_info(local, fi, status);
- fi->msg_type = htonl(msg_type);
-
- dev->stats.rx_packets++;
- dev->stats.rx_bytes += skb->len;
-
- skb_set_mac_header(skb, 0);
- skb->ip_summed = CHECKSUM_UNNECESSARY;
- skb->pkt_type = PACKET_OTHERHOST;
- skb->protocol = htons(ETH_P_802_2);
- memset(skb->cb, 0, sizeof(skb->cb));
- netif_rx(skb);
-}
-
-static int ieee80211_mgmt_open(struct net_device *dev)
-{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
-
- if (!netif_running(local->mdev))
- return -EOPNOTSUPP;
- return 0;
-}
-
-static int ieee80211_mgmt_stop(struct net_device *dev)
-{
- return 0;
-}
-
-static int ieee80211_change_mtu_apdev(struct net_device *dev, int new_mtu)
-{
- /* FIX: what would be proper limits for MTU?
- * This interface uses 802.11 frames. */
- if (new_mtu < 256 || new_mtu > IEEE80211_MAX_DATA_LEN) {
- printk(KERN_WARNING "%s: invalid MTU %d\n",
- dev->name, new_mtu);
- return -EINVAL;
- }
-
-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
- printk(KERN_DEBUG "%s: setting MTU %d\n", dev->name, new_mtu);
-#endif /* CONFIG_MAC80211_VERBOSE_DEBUG */
- dev->mtu = new_mtu;
- return 0;
-}
-
-void ieee80211_if_mgmt_setup(struct net_device *dev)
-{
- ether_setup(dev);
- dev->hard_start_xmit = ieee80211_mgmt_start_xmit;
- dev->change_mtu = ieee80211_change_mtu_apdev;
- dev->open = ieee80211_mgmt_open;
- dev->stop = ieee80211_mgmt_stop;
- dev->type = ARPHRD_IEEE80211_PRISM;
- dev->destructor = ieee80211_if_free;
-}
-
/* regular interfaces */
static int ieee80211_change_mtu(struct net_device *dev, int new_mtu)
@@ -345,7 +199,6 @@
return -ENOLINK;
break;
case IEEE80211_IF_TYPE_AP:
- case IEEE80211_IF_TYPE_MGMT:
case IEEE80211_IF_TYPE_STA:
case IEEE80211_IF_TYPE_MNTR:
case IEEE80211_IF_TYPE_IBSS:
@@ -410,10 +263,6 @@
if (local->open_count == 0) {
res = dev_open(local->mdev);
WARN_ON(res);
- if (local->apdev) {
- res = dev_open(local->apdev);
- WARN_ON(res);
- }
tasklet_enable(&local->tx_pending_tasklet);
tasklet_enable(&local->tasklet);
}
@@ -499,9 +348,6 @@
if (netif_running(local->mdev))
dev_close(local->mdev);
- if (local->apdev)
- dev_close(local->apdev);
-
if (local->ops->stop)
local->ops->stop(local_to_hw(local));
@@ -550,7 +396,7 @@
.cache_update = eth_header_cache_update,
};
-/* Must not be called for mdev and apdev */
+/* Must not be called for mdev */
void ieee80211_if_setup(struct net_device *dev)
{
ether_setup(dev);
@@ -806,8 +652,6 @@
pkt_data->flags |= IEEE80211_TXPD_DO_NOT_ENCRYPT;
if (control->flags & IEEE80211_TXCTL_REQUEUE)
pkt_data->flags |= IEEE80211_TXPD_REQUEUE;
- if (control->type == IEEE80211_IF_TYPE_MGMT)
- pkt_data->flags |= IEEE80211_TXPD_MGMT_IFACE;
pkt_data->queue = control->queue;
hdrlen = ieee80211_get_hdrlen_from_skb(skb);
@@ -860,7 +704,6 @@
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
struct ieee80211_local *local = hw_to_local(hw);
u16 frag, type;
- u32 msg_type;
struct ieee80211_tx_status_rtap_hdr *rthdr;
struct ieee80211_sub_if_data *sdata;
int monitors;
@@ -975,29 +818,9 @@
local->dot11FailedCount++;
}
- msg_type = (status->flags & IEEE80211_TX_STATUS_ACK) ?
- ieee80211_msg_tx_callback_ack : ieee80211_msg_tx_callback_fail;
-
/* this was a transmitted frame, but now we want to reuse it */
skb_orphan(skb);
- if ((status->control.flags & IEEE80211_TXCTL_REQ_TX_STATUS) &&
- local->apdev) {
- if (local->monitors) {
- skb2 = skb_clone(skb, GFP_ATOMIC);
- } else {
- skb2 = skb;
- skb = NULL;
- }
-
- if (skb2)
- /* Send frame to hostapd */
- ieee80211_rx_mgmt(local, skb2, NULL, msg_type);
-
- if (!skb)
- return;
- }
-
if (!local->monitors) {
dev_kfree_skb(skb);
return;
@@ -1344,8 +1167,6 @@
BUG_ON(local->reg_state != IEEE80211_DEV_REGISTERED);
local->reg_state = IEEE80211_DEV_UNREGISTERED;
- if (local->apdev)
- ieee80211_if_del_mgmt(local);
/*
* At this point, interface list manipulations are fine