iwlwifi: remove debugfs logspam
There really is no point in printing very verbose
error messages when somebody tries to access a
debugfs file before it is ready. Or even worse,
printing verbose messages when memory allocation
fails which *already* prints a huge warning.
Remove all IWL_ERR messages from debugfs.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
index c93f4e7..11ca48e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
@@ -230,10 +230,8 @@
/* default is to dump the entire data segment */
if (!priv->dbgfs_sram_offset && !priv->dbgfs_sram_len) {
priv->dbgfs_sram_offset = 0x800000;
- if (!priv->ucode_loaded) {
- IWL_ERR(priv, "No uCode has been loadded.\n");
+ if (!priv->ucode_loaded)
return -EINVAL;
- }
img = &priv->fw->img[priv->cur_ucode];
priv->dbgfs_sram_len = img->sec[IWL_UCODE_SECTION_DATA].len;
}
@@ -411,23 +409,18 @@
size_t eeprom_len = priv->cfg->base_params->eeprom_size;
buf_size = 4 * eeprom_len + 256;
- if (eeprom_len % 16) {
- IWL_ERR(priv, "NVM size is not multiple of 16.\n");
+ if (eeprom_len % 16)
return -ENODATA;
- }
ptr = priv->eeprom;
- if (!ptr) {
- IWL_ERR(priv, "Invalid EEPROM/OTP memory\n");
+ if (!ptr)
return -ENOMEM;
- }
/* 4 characters for byte 0xYY */
buf = kzalloc(buf_size, GFP_KERNEL);
- if (!buf) {
- IWL_ERR(priv, "Can not allocate Buffer\n");
+ if (!buf)
return -ENOMEM;
- }
+
eeprom_ver = iwl_eeprom_query16(priv, EEPROM_VERSION);
pos += scnprintf(buf + pos, buf_size - pos, "NVM Type: %s, "
"version: 0x%x\n",
@@ -461,10 +454,8 @@
return -EAGAIN;
buf = kzalloc(bufsz, GFP_KERNEL);
- if (!buf) {
- IWL_ERR(priv, "Can not allocate Buffer\n");
+ if (!buf)
return -ENOMEM;
- }
supp_band = iwl_get_hw_mode(priv, IEEE80211_BAND_2GHZ);
if (supp_band) {
@@ -566,10 +557,8 @@
ssize_t ret;
buf = kzalloc(bufsz, GFP_KERNEL);
- if (!buf) {
- IWL_ERR(priv, "Can not allocate Buffer\n");
+ if (!buf)
return -ENOMEM;
- }
for (cnt = 0; cnt < REPLY_MAX; cnt++) {
if (priv->rx_handlers_stats[cnt] > 0)
@@ -683,11 +672,8 @@
return -EFAULT;
if (!iwl_is_any_associated(priv))
priv->disable_ht40 = ht40 ? true : false;
- else {
- IWL_ERR(priv, "Sta associated with AP - "
- "Change to 40MHz channel support is not allowed\n");
+ else
return -EINVAL;
- }
return count;
}
@@ -834,10 +820,8 @@
ssize_t ret;
buf = kzalloc(bufsz, GFP_KERNEL);
- if (!buf) {
- IWL_ERR(priv, "Can not allocate buffer\n");
+ if (!buf)
return -ENOMEM;
- }
if (priv->tx_traffic && iwl_have_debug_level(IWL_DL_TX)) {
ptr = priv->tx_traffic;
pos += scnprintf(buf + pos, bufsz - pos,
@@ -950,10 +934,8 @@
return -EAGAIN;
buf = kzalloc(bufsz, GFP_KERNEL);
- if (!buf) {
- IWL_ERR(priv, "Can not allocate Buffer\n");
+ if (!buf)
return -ENOMEM;
- }
/*
* the statistic information display here is based on
@@ -1379,10 +1361,8 @@
return -EAGAIN;
buf = kzalloc(bufsz, GFP_KERNEL);
- if (!buf) {
- IWL_ERR(priv, "Can not allocate Buffer\n");
+ if (!buf)
return -ENOMEM;
- }
/* the statistic information display here is based on
* the last statistics notification from uCode
@@ -1581,10 +1561,8 @@
return -EAGAIN;
buf = kzalloc(bufsz, GFP_KERNEL);
- if (!buf) {
- IWL_ERR(priv, "Can not allocate Buffer\n");
+ if (!buf)
return -ENOMEM;
- }
/* the statistic information display here is based on
* the last statistics notification from uCode
@@ -1707,16 +1685,11 @@
ret = iwl_send_statistics_request(priv, CMD_SYNC, false);
mutex_unlock(&priv->mutex);
- if (ret) {
- IWL_ERR(priv,
- "Error sending statistics request: %zd\n", ret);
+ if (ret)
return -EAGAIN;
- }
buf = kzalloc(bufsz, GFP_KERNEL);
- if (!buf) {
- IWL_ERR(priv, "Can not allocate Buffer\n");
+ if (!buf)
return -ENOMEM;
- }
/*
* the statistic information display here is based on
@@ -1793,10 +1766,8 @@
return -EAGAIN;
buf = kzalloc(bufsz, GFP_KERNEL);
- if (!buf) {
- IWL_ERR(priv, "Can not allocate Buffer\n");
+ if (!buf)
return -ENOMEM;
- }
pos += scnprintf(buf + pos, bufsz - pos, "Statistics_TX_Error:\n");
pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t\t%u\n",
@@ -1936,10 +1907,8 @@
data = &priv->sensitivity_data;
buf = kzalloc(bufsz, GFP_KERNEL);
- if (!buf) {
- IWL_ERR(priv, "Can not allocate Buffer\n");
+ if (!buf)
return -ENOMEM;
- }
pos += scnprintf(buf + pos, bufsz - pos, "auto_corr_ofdm:\t\t\t %u\n",
data->auto_corr_ofdm);
@@ -2017,10 +1986,8 @@
data = &priv->chain_noise_data;
buf = kzalloc(bufsz, GFP_KERNEL);
- if (!buf) {
- IWL_ERR(priv, "Can not allocate Buffer\n");
+ if (!buf)
return -ENOMEM;
- }
pos += scnprintf(buf + pos, bufsz - pos, "active_chains:\t\t\t %u\n",
data->active_chains);