blob: 29979bb2a7689fd3d43bb9d2f5634ade6fb4c1c1 [file] [log] [blame]
/*
*
* $Id$
*
* Copyright (C) 2005 Mike Isely <isely@pobox.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#ifndef __PVRUSB2_HDW_H
#define __PVRUSB2_HDW_H
#include <linux/usb.h>
#include <linux/videodev2.h>
#include "pvrusb2-io.h"
#include "pvrusb2-ctrl.h"
/* Private internal control ids, look these up with
pvr2_hdw_get_ctrl_by_id() - these are NOT visible in V4L */
#define PVR2_CID_STDENUM 1
#define PVR2_CID_STDCUR 2
#define PVR2_CID_STDAVAIL 3
#define PVR2_CID_INPUT 4
#define PVR2_CID_AUDIOMODE 5
#define PVR2_CID_FREQUENCY 6
#define PVR2_CID_HRES 7
#define PVR2_CID_VRES 8
/* Legal values for the INPUT state variable */
#define PVR2_CVAL_INPUT_TV 0
#define PVR2_CVAL_INPUT_SVIDEO 1
#define PVR2_CVAL_INPUT_COMPOSITE 2
#define PVR2_CVAL_INPUT_RADIO 3
/* Values that pvr2_hdw_get_signal_status() returns */
#define PVR2_SIGNAL_OK 0x0001
#define PVR2_SIGNAL_STEREO 0x0002
#define PVR2_SIGNAL_SAP 0x0004
/* Subsystem definitions - these are various pieces that can be
independently stopped / started. Usually you don't want to mess with
this directly (let the driver handle things itself), but it is useful
for debugging. */
#define PVR2_SUBSYS_B_ENC_FIRMWARE 0
#define PVR2_SUBSYS_B_ENC_CFG 1
#define PVR2_SUBSYS_B_DIGITIZER_RUN 2
#define PVR2_SUBSYS_B_USBSTREAM_RUN 3
#define PVR2_SUBSYS_B_ENC_RUN 4
#define PVR2_SUBSYS_CFG_ALL ( \
(1 << PVR2_SUBSYS_B_ENC_FIRMWARE) | \
(1 << PVR2_SUBSYS_B_ENC_CFG) )
#define PVR2_SUBSYS_RUN_ALL ( \
(1 << PVR2_SUBSYS_B_DIGITIZER_RUN) | \
(1 << PVR2_SUBSYS_B_USBSTREAM_RUN) | \
(1 << PVR2_SUBSYS_B_ENC_RUN) )
#define PVR2_SUBSYS_ALL ( \
PVR2_SUBSYS_CFG_ALL | \
PVR2_SUBSYS_RUN_ALL )
enum pvr2_config {
pvr2_config_empty,
pvr2_config_mpeg,
pvr2_config_vbi,
pvr2_config_radio,
};
const char *pvr2_config_get_name(enum pvr2_config);
struct pvr2_hdw;
/* Create and return a structure for interacting with the underlying
hardware */
struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf,
const struct usb_device_id *devid);
/* Poll for background activity (if any) */
void pvr2_hdw_poll(struct pvr2_hdw *);
/* Trigger a poll to take place later at a convenient time */
void pvr2_hdw_poll_trigger_unlocked(struct pvr2_hdw *);
/* Register a callback used to trigger a future poll */
void pvr2_hdw_setup_poll_trigger(struct pvr2_hdw *,
void (*func)(void *),
void *data);
/* Destroy hardware interaction structure */
void pvr2_hdw_destroy(struct pvr2_hdw *);
/* Set up the structure and attempt to put the device into a usable state.
This can be a time-consuming operation, which is why it is not done
internally as part of the create() step. Return value is exactly the
same as pvr2_hdw_init_ok(). */
int pvr2_hdw_setup(struct pvr2_hdw *);
/* Initialization succeeded */
int pvr2_hdw_init_ok(struct pvr2_hdw *);
/* Return true if in the ready (normal) state */
int pvr2_hdw_dev_ok(struct pvr2_hdw *);
/* Return small integer number [1..N] for logical instance number of this
device. This is useful for indexing array-valued module parameters. */
int pvr2_hdw_get_unit_number(struct pvr2_hdw *);
/* Get pointer to underlying USB device */
struct usb_device *pvr2_hdw_get_dev(struct pvr2_hdw *);
/* Retrieve serial number of device */
unsigned long pvr2_hdw_get_sn(struct pvr2_hdw *);
/* Called when hardware has been unplugged */
void pvr2_hdw_disconnect(struct pvr2_hdw *);
/* Get the number of defined controls */
unsigned int pvr2_hdw_get_ctrl_count(struct pvr2_hdw *);
/* Retrieve a control handle given its index (0..count-1) */
struct pvr2_ctrl *pvr2_hdw_get_ctrl_by_index(struct pvr2_hdw *,unsigned int);
/* Retrieve a control handle given its internal ID (if any) */
struct pvr2_ctrl *pvr2_hdw_get_ctrl_by_id(struct pvr2_hdw *,unsigned int);
/* Retrieve a control handle given its V4L ID (if any) */
struct pvr2_ctrl *pvr2_hdw_get_ctrl_v4l(struct pvr2_hdw *,unsigned int ctl_id);
/* Retrieve a control handle given its immediate predecessor V4L ID (if any) */
struct pvr2_ctrl *pvr2_hdw_get_ctrl_nextv4l(struct pvr2_hdw *,
unsigned int ctl_id);
/* Commit all control changes made up to this point */
int pvr2_hdw_commit_ctl(struct pvr2_hdw *);
/* Return name for this driver instance */
const char *pvr2_hdw_get_driver_name(struct pvr2_hdw *);
/* Return PVR2_SIGNAL_XXXX bit mask indicating signal status */
unsigned int pvr2_hdw_get_signal_status(struct pvr2_hdw *);
/* Query device and see if it thinks it is on a high-speed USB link */
int pvr2_hdw_is_hsm(struct pvr2_hdw *);
/* Turn streaming on/off */
int pvr2_hdw_set_streaming(struct pvr2_hdw *,int);
/* Find out if streaming is on */
int pvr2_hdw_get_streaming(struct pvr2_hdw *);
/* Configure the type of stream to generate */
int pvr2_hdw_set_stream_type(struct pvr2_hdw *, enum pvr2_config);
/* Get handle to video output stream */
struct pvr2_stream *pvr2_hdw_get_video_stream(struct pvr2_hdw *);
/* Emit a video standard struct */
int pvr2_hdw_get_stdenum_value(struct pvr2_hdw *hdw,struct v4l2_standard *std,
unsigned int idx);
/* Enable / disable various pieces of hardware. Items to change are
identified by bit positions within msk, and new state for each item is
identified by corresponding bit positions within val. */
void pvr2_hdw_subsys_bit_chg(struct pvr2_hdw *hdw,
unsigned long msk,unsigned long val);
/* Retrieve mask indicating which pieces of hardware are currently enabled
/ configured. */
unsigned long pvr2_hdw_subsys_get(struct pvr2_hdw *);
/* Adjust mask of what get shut down when streaming is stopped. This is a
debugging aid. */
void pvr2_hdw_subsys_stream_bit_chg(struct pvr2_hdw *hdw,
unsigned long msk,unsigned long val);
/* Retrieve mask indicating which pieces of hardware are disabled when
streaming is turned off. */
unsigned long pvr2_hdw_subsys_stream_get(struct pvr2_hdw *);
/* Enable / disable retrieval of CPU firmware. This must be enabled before
pvr2_hdw_cpufw_get() will function. Note that doing this may prevent
the device from running (and leaving this mode may imply a device
reset). */
void pvr2_hdw_cpufw_set_enabled(struct pvr2_hdw *, int enable_flag);
/* Return true if we're in a mode for retrieval CPU firmware */
int pvr2_hdw_cpufw_get_enabled(struct pvr2_hdw *);
/* Retrieve a piece of the CPU's firmware at the given offset. Return
value is the number of bytes retrieved or zero if we're past the end or
an error otherwise (e.g. if firmware retrieval is not enabled). */
int pvr2_hdw_cpufw_get(struct pvr2_hdw *,unsigned int offs,
char *buf,unsigned int cnt);
/* Retrieve previously stored v4l minor device number */
int pvr2_hdw_v4l_get_minor_number(struct pvr2_hdw *);
/* Store the v4l minor device number */
void pvr2_hdw_v4l_store_minor_number(struct pvr2_hdw *,int);
/* Direct read/write access to chip's registers:
chip_id - unique id of chip (e.g. I2C_DRIVERD_xxxx)
reg_id - register number to access
setFl - true to set the register, false to read it
val_ptr - storage location for source / result. */
int pvr2_hdw_register_access(struct pvr2_hdw *,
u32 chip_id,unsigned long reg_id,
int setFl,u32 *val_ptr);
/* The following entry points are all lower level things you normally don't
want to worry about. */
/* Issue a command and get a response from the device. LOTS of higher
level stuff is built on this. */
int pvr2_send_request(struct pvr2_hdw *,
void *write_ptr,unsigned int write_len,
void *read_ptr,unsigned int read_len);
/* Slightly higher level device communication functions. */
int pvr2_write_register(struct pvr2_hdw *, u16, u32);
/* Call if for any reason we can't talk to the hardware anymore - this will
cause the driver to stop flailing on the device. */
void pvr2_hdw_render_useless(struct pvr2_hdw *);
/* Set / clear 8051's reset bit */
void pvr2_hdw_cpureset_assert(struct pvr2_hdw *,int);
/* Execute a USB-commanded device reset */
void pvr2_hdw_device_reset(struct pvr2_hdw *);
/* Execute hard reset command (after this point it's likely that the
encoder will have to be reconfigured). This also clears the "useless"
state. */
int pvr2_hdw_cmd_deep_reset(struct pvr2_hdw *);
/* Execute simple reset command */
int pvr2_hdw_cmd_powerup(struct pvr2_hdw *);
/* Order decoder to reset */
int pvr2_hdw_cmd_decoder_reset(struct pvr2_hdw *);
/* Direct manipulation of GPIO bits */
int pvr2_hdw_gpio_get_dir(struct pvr2_hdw *hdw,u32 *);
int pvr2_hdw_gpio_get_out(struct pvr2_hdw *hdw,u32 *);
int pvr2_hdw_gpio_get_in(struct pvr2_hdw *hdw,u32 *);
int pvr2_hdw_gpio_chg_dir(struct pvr2_hdw *hdw,u32 msk,u32 val);
int pvr2_hdw_gpio_chg_out(struct pvr2_hdw *hdw,u32 msk,u32 val);
/* This data structure is specifically for the next function... */
struct pvr2_hdw_debug_info {
int big_lock_held;
int ctl_lock_held;
int flag_ok;
int flag_disconnected;
int flag_init_ok;
int flag_streaming_enabled;
unsigned long subsys_flags;
int cmd_debug_state;
int cmd_debug_write_len;
int cmd_debug_read_len;
int cmd_debug_write_pend;
int cmd_debug_read_pend;
int cmd_debug_timeout;
int cmd_debug_rstatus;
int cmd_debug_wstatus;
unsigned char cmd_code;
};
/* Non-intrusively retrieve internal state info - this is useful for
diagnosing lockups. Note that this operation is completed without any
kind of locking and so it is not atomic and may yield inconsistent
results. This is *purely* a debugging aid. */
void pvr2_hdw_get_debug_info(const struct pvr2_hdw *hdw,
struct pvr2_hdw_debug_info *);
/* Cause modules to log their state once */
void pvr2_hdw_trigger_module_log(struct pvr2_hdw *hdw);
/* Cause encoder firmware to be uploaded into the device. This is normally
done autonomously, but the interface is exported here because it is also
a debugging aid. */
int pvr2_upload_firmware2(struct pvr2_hdw *hdw);
/* List of device types that we can match */
extern struct usb_device_id pvr2_device_table[];
#endif /* __PVRUSB2_HDW_H */
/*
Stuff for Emacs to see, in order to encourage consistent editing style:
*** Local Variables: ***
*** mode: c ***
*** fill-column: 75 ***
*** tab-width: 8 ***
*** c-basic-offset: 8 ***
*** End: ***
*/